Check Valve, Model : RHD/RHZ/RHV/RHF
|
|
- Marcus Perkins
- 5 years ago
- Views:
Transcription
1 escription Poppet type valves. Allows free flow from port A to and offer leakage free closure in opposite direction. Four basic models : RH, RHZ, RHV and RHF Seven standard sizes : N, N 8, N 1, N 15, N, N 5, N 3 Four cracking pressure :.5, 1.5, 3 and 5 bar. RH RHZ RHV RHF Section A A Hydraulic Symbol Technical Specifications onstruction Poppet type Mounting style In line Mounting position Optional racking pressure available.5, 1.5, 3, and 5 bar ode for cracking pressure options Omit,,, and respectively. Flow direction Operating pressure From port `A' to port `'. 315 bar. Hydraulic medium Mineral oil. Viscosity range 1 cst to 38 cst. Fluid temperature range - o to +7 o. Fluid cleanliness requirement As per ISO 19/1 or better. Maximum flow handling capacity Refer graph. opyrights 18 hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page 1/
2 Expected performance urves Oil used : ISO V 8, Viscosity : 8 o N- N N-1 N N- N N-3 opyrights 18 hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page /
3 RH connection as per ISO 83 at both ends S1 S S3 o.d l 1 ~ L 1 Table 1 Ordering ode Size od S1 S S3 L1 l1 RHPL-. N- - L RH8PL L RHPS-. - S RH8PS S RH1PL-. N L RH1PS S RH1PS S RH1PL-. N L RH15PL L RH1PS S RH18PL-. N L RHPS-. - S RHPL-. N- - L RH5PS S RH8PL-. N L RH3PS S RH35PL-. N L RHPL-. - L RH38PS S opyrights 18 hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page 3/
4 RHZ connections (ISO 83) at inlet SP Male stud end (with E seal) at outlet S3 S1 S o.d Ød7 l i ~ L Table Part Number Size od S1 S S3 L l i Ød7 RHZPLE-. N- - L /8 1 RHZ8PLE L / 19 RHZPSE-. - S / 19 RHZ8PSE S / 19 RHZ1PLE-. N L / 19 RHZ1PSE S /8 RHZ1PSE S /8 RHZ1PLE-. N L /8 RHZ15PLE L / 7 RHZ1PSE S / 7 RHZ18PLE-. N L / 7 RHZPSE-. - S / 3 RHZPLE-. N- - L / 3 RHZ5PSE S RHZ8PLE-. N L RHZ3PSE S / 5 RHZ35PLE-. N L / 5 RHZPLE-. - L / 55 RHZ38PSE S / 55 opyrights 18 hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page /
5 RHV SP Male stud end (with E seal) at inlet connections (ISO 83) at outlet S1 S S3 Ød7 o.d i l ~L Table 3 Part Number Size od S1 S S3 L l i Ød7 RHVPLE-. N- - L /8 1 RHV8PLE L / 19 RHVPSE-. - S / 19 RHV8PSE S / 19 RHV1PLE-. N L / 19 RHV1PSE S /8 RHV1PSE S /8 RHV1PLE-. N L /8 RHV15PLE L / 7 RHV1PSE S / 7 RHV18PLE-. N L / 7 RHVPSE-. - S / 3 RHVPLE-. N- - L / 3 RHV5PSE S RHV8PLE-. N L RHV3PSE S / 5 RHV35PLE-. N L / 5 RHVPLE-. - L / 55 RHV38PSE S / 55 opyrights 18 hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page 5/
6 RHF SP Ports at inlet and at outlet S1 S T1 T1 L 1 Table Ordering ode S1 S T1 L1 RHF-. 1/ 1 58 RHF3-. 3/ RHF-. 1/ RHF-. 3/ RHF RHF / 55 1 RHF / Ordering ode RHZ 1 P S E. Type of heck Valve RH RHZ RHV RHF Size (for RH/RHZ/RHV) Refer Table 1 to Table 3 Port Size (for RHF) Refer Table End connection type (For RH/RHZ/RHV) With Ferrule - P esign Series Subject to revision Seal Material Omit Nitrile 9º V Viton 9º racking Pressure Omit 1.5 bar 3. bar 5. bar Type of Sealing (For RHZ/RHV) E - Elastomeric Seal Pressure Series (Refer Table 1 to Table 3) Low Pressure - L High Pressure - S End onnection (For RHZ/RHV) (Refer Table and Table 3) Note : Add prefix 31 to the existing part code for SS 31 valves. e.g. 31-RH1PS-. opyrights 18 hyloc hydrotechnic pvt. ltd. All rights reserved Engineering atasheet, Page /
Check Valve, Model : RHD/RHZ/RHV/RHF
heck Valve, Model : RH/RHZ/RHV/RHF Ref. No : H8 Release Jan (imensions in mm) escription Poppet type valves. Allows free flow from port A to and offer leakage free closure in opposite direction. Four basic
More informationCheck Valves, Size Spherical Poppet-type, Screw-in Design Series RKVE l/min, 350 bar (500 bar)
Check Valves, Size 04... 40 Spherical Poppet-type, Screw-in Design Series RKVE... 360 l/min, 350 bar (500 bar) 1 General 1.1 Product description Series RKVE units are screw-in check valves with mounting
More informationPilot Operated Check Valves
Pilot Operated heck Valves Nomenclature IS graphic symbols for hydraulic system L eatures - P - - - - pplicable fluid code No designation: Petroleum-based hydraulic fluid, waterglycol hydraulic fluid :
More information3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = 4 l/min ( gpm), p max = 5 bar (45 psi) Bidirectional seat-valve shut-off, direct acting Series W.B, WF.B Guided valve spool and poppet Two spool variants are
More informationCheck Type Prefill & Exhaust Valves
Check Type Prefill & Exhaust Valves Bulletin 86620 Table of Contents Performance Assurance page 3 PV Valves Features and Benefits 4-5 Specifications 6-7 Dimensions & Weights 8-12 Performance Curves 13-14
More informationPressure Control Valves
efore using the product, please check the Pressure ontrol Valves JIS graphic symbols for hydraulic system Refer to the next page. Features These direct operated control valves can be used as sequence valves,
More informationThrottle and throttle check valve
Throttle and throttle check valve RE 79/0.09 Replaces: 0.06 /6 Types MG and MK Size 6 to 0 Component series X Maximum operating pressure 5 bar Maximum flow 400 l/min K564- Table of contents Contents Page
More informationSV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
More informationService Data Vickers. Directional Controls. Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 I-3624-S. Revised 9/1/86
Service Data Vickers Directional Controls Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 Revised 9/1/86 I-3624-S Installation Table A DG5S4-10**-53 Does DG5S4-10**-E-53 Not DG5S4-10**-X-53
More informationFeed Pumps FZP / MFZP
eed Pumps ZP / MZP Symbol General The feed pump from the ZP series is a vane pump for the low-pressure range with constant flow rate. Product eatures l irect drive pump no bell housing or coupling required
More informationDIRECT ACTING PRESSURE RELIEF VALVE Model : DPR
A olyhydron Group Company Description DIREC ACING RESSURE RELIEF VALVE Model : DR of 6 Ref. No. Release 05 / 24 Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and
More informationProportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
More informationFLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
More informationCheck valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -
More information3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
More informationDirectional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
More informationDirectional Control Valves
Directional Control Valves Operating pressure: Flow rate: 3-chamber, electrically controlled 4/3- or 4/2-way directional control valve. Direct-activated by solenoids with screwed-in wet pin armature. Standard
More information2/2 Solenoid Cartridge Valve, Size 10
2/2 Solenoid Cartridge Valve, Size 1 Q max = 8 l/min, p max = 3 bar Seat-valve shut-off, two-stage, monitored operating position 1 Description With integral electronic monitoring of operating position
More information2/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min (.3 gpm), p max = 3 bar (4 psi) Bidirectional leak-proof shutoff, direct acting, with EX-safty solenoid coil Description Valve: Bidirectional leak-proof
More informationDRV2-080 Adjustable, Direct-Acting Relief Valve
SOLENOID DRV2-080 Adjustable, Direct-Acting Relief Valve SERIES 8 CHECK MOTION FLOW USASI / ISO ➁ ➀ DESCRIPTION An adjustable, direct-acting poppet cartridge valve designed to limit pressure in hydraulic
More information2/2 Cartridge Seat Valve, Size 5
/ Cartridge Seat Valve, Size Q max = l/min, p max = bar Digital valve, bidirectional seat-valve shut-off, direct acting Series WSGD / WSOD For use in digital hydraulics With bidirectional seat-valve shut-off
More informationRHD/V/Z non return valve
RHD/V/Z non return valve Design with sealing edge: Size 06L and 08L / 06S and 08S and all sizes in stainless steel with a PTFDE sealing disc. Design with O-ring (item. 7): Sizes L, 2L, 5L, 8L, 22L, 28L,
More informationThe Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & Hydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and Hydraulics (I) Pvt. Ltd.
More informationPressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
More informationCheck Valve, Size 04 16
, Size 04 6 Spherical poppet-type, screw-in design Series RKVE -VD 0 l/min, 50 bar for the same pressure differential, Q max. is around 50% higher than with standard RKVE valves no soft seal, therefore
More informationPILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
More informationDIRECT ACTING PRESSURE RELIEF VALVE DPR
DIREC ACING RESSURE RELIEF VALVE DR Ref. No. 4896 Release 2/25 Description Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and noise control. hree sizes. - 6, and 2.
More informationGEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
More information* Optional PRESSURE COMPENSATOR - FLANGED TYPE B A X 2.2. Typical application VR5P with flow control valve
* Veljan 3 ports pressure compensator Valve are designed for improved operation safety and reduced mountg cost. These valves are used to mata a constant pressure drop External PD, External PP Internal
More informationPVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More informationHousings and miscellaneous parts
Hydraulic Screw-in artridge Valves (SiV) Housings and miscellaneous parts Standard and special valve housings, orifice disks, orifice sizing charts, pilot pistons, adapters, adjustment kits and seal kits
More informationIFP MPC(D)03 PILOT CHECK VALVE MODULE
IFP MPC(D)03 PILOT CHECK MODULE ISO4401-03 SIZE/NFPA D03 STEEL SEAT FOR LONG WEAR ZERO LEAKAGE DECOMPRESSION FEATURE C:\wliu\MPC.bmp MPC-03-W MPC-03-A MPC-03-B MPC (D) - 03 - W - 1 MODULAR CHECK DECOMPRESSION
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 GENERAL DESCRIPTION RH0...1-...F... Document: DCVC3-1-Aug 2013 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction RH0...1-...F...
More informationInline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
More informationPRESSURE SWITCH 1PS / 1PF / 1PT
RESSURE SWICH 1S / 1F / 1 Ref. No. 98 Release 7/2 1 Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available,
More informationDIRECTIONAL CONTROL VALVES CETOP3
DIRECTIONAL CONTROL VALVES CETOP3 CONTENTS: RH06...1 - electrical control... RH06...2 - hydraulic control... Page 1/17...7/17 8/17...9/17 RH06...4 - mechanical control RH06...6 - pneumatic control......
More informationFlow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
More informationHydraulic Valves. Experience plus ideas
Hydraulic Valves Experience plus ideas Contents Type/Page Product information Hydraulic valves Function description Non-return valves Pg. 271 Non-return valves Pg. 272-273 RHD RHDI RHV RHZ Function description
More informationELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
More informationFixed Displacement Bent Axis Axial Piston Pumps TPB 70 - TAP 70
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationVickers. Service Data. Vane Pumps. Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * I-3154-S. Rev. 2/98
Service Data Vickers Vane Pumps Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * Rev. 2/98 I-3154-S MODEL VTA VTB VTBP ADAPTER ADAPTER PLATE KIT 584936 941296 584922 941297 FOR BP MODELS AN ADAPTER
More informationRA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
More informationFilling valve sandwich plate
Filling valve sandwich plate RE 0478/08. Replaces: 06.06 /4 Type ZSF and ZSFW Size to 00 Component series ; Maximum operating pressure 50 bar Flow up to 7000 l/min ( p = 0. bar) Table of contents Contents
More informationCheck Valves Product Specs and Ordering SINGLE BALL STEEL CHECK VALVES. Specifications. Operation. Features
SINGLE BALL STEEL CHECK VALVES Single Ball Steel Check Valves are designed for use in hydraulic or lubrication systems with pressures up to 5,000 PSI. Available in two models for use as inlet or outlet
More informationVickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi)
Vickers Pressure Relief Solenoid Operated, Two-Stage Directional Control Valve DG5S4-02 Flows to 115 l/min (30 USgpm) Pressure to 210 bar (3000 psi) Revised 2/93 GB C 2037 Table of Contents Model Code...................................................................................................
More informationSolenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
More informationProportional Valves. Proportional solenoid valves for pressure and flow control B-1.A. An Eaton Brand
Proportional Valves Proportional solenoid valves for pressure and flow control An Eaton rand -.A Proportional Valves Valve Locator/Section Contents Note: Proportional valve solenoid coils and electronic
More informationCheck Valves. VC Series - Cartridge Mounting 500 Bar. Innovative Fluid Power. Bulletin 86624
VC Series - Cartridge Mounting 500 ar Innovative Fluid Power ulletin 86624 Issue 1.0 02.2010 VCC 500 ar General Information Check Valve with Standard Top Cap Section View with Standard Poppet Maximum Working
More informationSmith Meter Truck Meter Packages Specifications
Issue/Rev. 0.4 (8/12) P Meter Smith Meter Truck Meter Packages Specifications ulletin SS01095 TP (Ticket Printer) LN (Large Numeral ounter) Preset ounter Air Eliminator/ Strainer Faucet P Meter Smith Meter
More informationDOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
More informationThe Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.
More informationCheck valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
More informationKTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationCVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
More informationModel (kg) CIT CRG-06 CIT : CIT CRG-10 CIT : CIT CIT
check valve OUT IN RG - 06-5 1 3 1 RG: Sub-plate mounting IT: Thread connection Valve size 03: 3/8" 04: 1/" 06: 3/4" 08: 1" 10: 1-1/4" 1: 1-1/" 16: " 3 racking pressure (bar) 5: 0.5 50: 5 Rated Flow Max.
More informationModular valves DO5 (NG 10) 315 bar
Modular valves DO5 (N ) 315 bar 2 Modular valves DO5 (N ) 315 bar OSCH OSCH Modular valves DO5 (N ) 315 bar 3 roduct Range ressure relief valves age ressure reducing valves age 4 4 4 Check valves 4 16
More informationDirectional Controls. Solenoid Controlled Pilot Operated Directional Valve. Vickers DF5S4(L)-16*A/B/C/N-(*)-(E)*-53. Service Data I 3622-S
Service Data Vickers Directional Controls Solenoid Controlled Pilot Operated Directional Valve DF5S4(L)-16*-(*)-(E)*-53 Revised 2/01/98 I 3622-S See back page for solenoid indicator lights. Pilot Attaching
More informationDENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C 2/2-Way Function / Cavity conform to ISO 7368 (DIN 24342) Publ. 7 EN 5060 A FEATURES, DESCRIPTION FEATURES x High flow cartridges give highest
More informationKB Series self averaging pitot flowmeter for gas, liquids and steam flows
process measurement solutions K Series self averaging pitot flowmeter for gas, liquids and steam flows Data sheet IP371 Advantages of the K series Description Patented square sensor design - reliable accuracy
More informationORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
More informationPressure limitation and feed valve, pilot-operated Type MHDBN...Y
Pressure limitation and feed valve, pilot-operated Type MHDBN...Y RE 64600 Edition: 06.2018 Sizes 22, 32 Series 3X Maximum working pressure 420 bar Maximum flow 400 l/min H8121 Features Screw-in cartridge
More informationCentro-Matic Automated Lubrication Systems Grease Injectors
SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available in
More informationHydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
More informationCheck valve. RE 21536/07.05 Replaces: Type Z1S. Size10 Component series 3X Maximum operating pressure 315 bar Maximum flow 100 l/min 1/6
Check valve RE 2536/07.05 Replaces: 05.02 /6 ype ZS Size0 Component series 3X Maximum operating pressure 35 bar Maximum flow 00 l/min H5856 able of contents Contents Page Features Ordering code 2 Standard
More information2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
More informationfluid control Fluid Control Components Index
Fluid ontrol omponents Index VH Series 1 heck valves XVH Series 5 Excess flow valves 6100/6200 Series 13 heck valves 691F Series 16 heck valves R6000 Series 18 djustable relief valves 6600 Series 24 leed
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationSolenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
More informationRS* /110 ED DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30. Q max (see table of performances) THREADED PORTS CARTRIDGE TYPE
31 200/110 ED RS* DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30 THREADED PORTS CARTRIDGE TYPE p max (see table of performances) Q max (see table of performances) OPERATING PRINCIPLE The RS* and RS*-I
More informationFlow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load compact design reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description.
More information2/2 Logic Cartridge Valve, Size 10
2/2 Logic Cartridge Valve, Size 10 Q max = 10 l/min, p max = 420 bar ctive Control, Seated Design ctive control rea ratio 2 : 1 High flow rates with low p Seat-valve shut-off from and No pilot oil consumption
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
More informationPowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
More informationDouble block and bleed style stainless steel butterfly valve sizes 1" to 6" [25 mm to 150 mm]. F250D for imperial tubing F251D for metric tubing
Features Keystone proven valve and actuator technology. Failsafe pneumatic interlocks. Fully machined 316L or 304L stainless steel body. Linkage driven, with only one actuator required. Linkage safety
More informationInsert Valves Flow control
RE 90010-05/07.2012 Bosch Rexroth Oil Control S.p.A. Insert Valves Flow control Designation Description Cavity Code Data sheet Pages Insert valve flow control, 2-way pressure compensated partially adjustable
More informationA single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More informationPressure Regulators RHPS Series
Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to
More informationBLOC U A-12G BLOC U C-12G
3.3- INJECTOR BLOCKS AND ORIFICES 3.3.1- INJECTOR BLOCKS WITHOUT IGNITION AND WITHOUT FLAME SAFETY BLOC U-0-000-000-00-A-12G...3.3.1.1 BLOC U-0-000-000-00-C-12G...3.3.1.2 Related sections : Burners...3.2
More informationElectrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1...
Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1... 3 l/min, 420 bar Two pressure valve, ON / OFF or HI / LO With internal pilot drain to
More informationCatalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
More informationA range of cost saving solutions. Flowmeters &Monitors. Flowmeters &monitors
range of cost saving solutions Flowmeters &Monitors 29 Flowmeters &monitors LoFlow - and Flowmeters Easy to read, permanent printed scales. Large scale definition for precise measurement. Easy panel mounting
More informationHydraulic Pump Series F1plus Fixed Displacement
Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationCHECK VALVE - DIRECT OPERATED - Series VC4V SPECIFICATIONS PERFORMANCE CURVES VC4V03 VC4V10 VC4V06
CHECK VLVE - DIRECT OPERTED - Series VV Veljan Direct operated Check Valve Series VV are poppet type and designed for a maximum pressure of 35 bar and a flow capacity rangg from 18 l/m for a 3/8 valve
More informationCheck Valves up to 828 bar, 190 litres per minute
Hydraulic and Pneumatic Check Valves up to 828 bar, 190 litres per minute Superior performance throughout the full operational range Features: 316L stainless steel Arctic Service options to -60 o C Low
More informationContents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves.
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 General Information Technical data Performance Curves Dimensions - Basics Valve Dimensions - LS Valve Secondary
More informationCentro-Matic Automated Lubrication Systems Grease Injectors
Series SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available
More informationPressure Relief Valves
VICKERS Pressure Relief Valves Unloading Relief Valves EURG1/2-06/10, 13 Design and EURT1/2-06/10, 12 Design Sectional Illustrations EURG* EURT* Basic Characteristics Mounting... Pipe or subplate mounting
More informationInline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
More informationSymbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
More informationLow / Medium Pressure Duplex Filter Inline mounting. Type : 40/160-LD/LDN. Filters. Accumulators. Hydraulic Symbol. Technical Data
Filters. Accumulators Low / Medium Pressure Duplex Filter Inline mounting Type : 0/60LD/LDN Hydraulic Symbol Technical Data Material of Construction Head : GGG50. Bowl : Carbon Steel. Seals : Nitrile /
More informationELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
More informationCODIFICATION CHART - P3000 SERIES
CODIFICATION CHART - P3000 SERIES 0P 3003 C P S T B N Frame Size Displacement Direction Shaft Mounting Inlet & End Cover Seals of Rotation Flange Outlet Ports AVAILABLE IN SERIES 0P 1P 2P 3P Direction
More informationCALEFFI. Motorised ball valve for central heating systems. 638 series 01196/18 GB. replaces dp 01196/12 GB
Motorised ball valve for central heating systems 638 series M 21654 003 LI 01196/18 G replaces dp 01196/12 G unction Motorised ball valves allows both automatic shut-off and diversion of the thermal medium
More informationO-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
More informationISO 4401 size 07; 315 bar (4500 psi); up to 200 L/min (53 USgpm) General Description
Vickers SystemStak SystemStak Valves ISO 441 size 7; 315 bar (45 psi); up to 2 L/min (53 USgpm) General Description This range of stackable hydraulic controls are designed to be mounted under a size 7
More information