Service Data Vickers. Directional Controls. Pilot Operated Directional Control Valves DG5S4-10**---53 I-3624-S. Revised 9/1/86

Size: px

Start display at page:

Download "Service Data Vickers. Directional Controls. Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 I-3624-S. Revised 9/1/86"

Joel Webster
6 years ago
Views:

1 Service Data Vickers Directional Controls Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 Revised 9/1/86 I-3624-S

2 Installation Table A DG5S4-10**-53 Does DG5S4-10**-E-53 Not DG5S4-10**-X-53 Exist DG5S4-10**-X-E-53 DG5S4-10**-K/L/R/S DG5S4-10**-E-K/L/R/S DG5S4-10**-X-K/L/R/S-53 DG5S4-10**-X-E-K/L/R/S Valve Code Main Stage Spool DG5S DG5S DG5S DG5S DG5S DG5S DG5S DG5S DG5S DG5S Valve Type Spool * * * B C ID Plate W/Circuit Diagram A B, C, N *Spool Assembly Assemble type 1 and 3 spools with narrow center land toward A end of valve. A end is defined as being closest to cylinder port A. The type 31 spool is installed in reverse of type 3, with narrow center land toward B end. Torques (Oiled) N.m lb. in Pilot Attaching Parts Bolt L Washer W/ Pilot Choke 1034 W/Pilot Choke (See back page) Torque to N.m lb. in. Remove both ends of Valve, A offset models only Screw Torque to N.m ( lb. ft.) Washer Spring Spool Cover Eaton Hydraulics Incorporated 2000 All Rights Reserved Included in F3 Seal Kit Included in Fastener Kit Included in Bolt Kit Included in Bolt Kit Included in Kit Torques Not available for sale Used On Check Valve s Only Seal Kit The -53 design valves are manufactured as shown with F3 seals used internally. Interface seals are standard Nitrile material and are converted to F3 in the seal kit. All seals in the seal kit are F3. SAE straight thread plugs used on exterior of valve. Parts included in service kits not sold separately.

3 Valve DG5S4-10*A-53 DG5S4-10*B-53 DG5S4-10*C-53 DG5S4-10*N-53 Main Stage Spool 0, 2, 6, 9, 33 0, 1, 2, 3, 6 9, 31, 33 4 & 8 0, 1, 2, 3, 6 9, 31, 33 4 & 8 0, 2, 6, 9, 33 Valve Is Assembled: Left Hand Right Hand (STD) Pilot Valve Code (See Back Page For Exploded View) DG4S4-012A-*-50-LH DG4S4-012A-*-50 DG4S4-016C-*-50-S163 DG4S4-016C-*-50-S87 DG4S4-0168C-*-50-S163 DG4S4-0168C-*-50-S87 DG4S4-016C-*-50 DG4S4-0168C-*-50 DG4S4-012N-*-51 This solenoid removed on A & B models (right hand) 7074 (Remove for Internal Pilot Drain T in ) I.D. Plate W/Circuit Diagram Rivet Pilot Attaching Bolts (5 req d) (Ref.) (Nitrile) Screw Torque to N.m ( lb. ft.) Spring Washer Cover Remove both ends of Valve A offset models only Body (Std.) Body (Check valve) C (Nitrile) X Y B Rest Pin (Nitrile) A Sleeve (Press in place) Spring P Port 6422 Poppet O Ring (3 req d) (Check valve models) (4 req d std models) (Nitrile) (A, B, P, & T Ports) Seat (Nitrile) DG5S4-10**-K DG5S4-10**-L DG5S4-10**-R DG5S4-10**-S Spring

4 Included in Body S/A Included in Detent Kit Included in F3 Pilot Valve Seal Kit Voltage 115AV60 230AC60 460AC60 Solenoid S/A S/A Complete F3 Coil Std Std For additional Solenoid S/A s See I-3544-S F Identification Plate Screw Torque to N.m (7-9 lb. in.) Screw Screw Torque to N.m (19-23 lb. in.) Gasket Wire & Gasket S/A Guide Limiter Spring Screw (See Main Stage for Fastener Kit) Use on Offset s Cover Lockwasher (Part of Fastener Kit) Use on C, N, & C-S163 s Push Pin DG4S4-01*C/N/S163 DG4S4-01*A/-S87 Solenoid S/A Cover Snap Ring Guide Body S/A Spool (5 req d) (Nitrile) Use on C-S87 s Gasket Screw Torque to N.m (19-23 lb. in.) Washer (Omit on N s) Spring ( N s only) Spring C, -S87, & -S163) Spacer N s only (Omit on C, S87 & S163 models) Washer

5 Spool Diagram Plate A C Type Part LH RH STD/S87/S Rivet (4 req d.) Diagram Plate N A Spool designation of (68B) indicates valve is assembled LH & is used as a pilot for two Stage Valves with 4 or 8 type Main Stage Spools. Seal Kit The -53 design valves are manufactured as shown with F3 seals used internally. Interface seals are standard Nitrile material and are converted to F3 in the seal kit. All seals in the seal kit are F Spring Retaining Ring For models with Solenoid Indicator Lights Screw Torque to N.m (7-9 lb. in.) Gasket Solenoid Indicator Light Kit (Includes all parts indentified) Kit Voltage Range 100 thru thru 233 Identification Plate Solenoid Indicator Light For single solenoid models right hand assembly shown. For left hand assembly all parts are reversed, except body & spool. Ex. LH model: Dg4S4-01-**-*-5*-LH Detent Pin Detent Retainer Refer to Parts Drawing I-3487-S for s with In Feature Push Pin Rollpin Screw Torque to N.m (30-35 lb. in.) Guide Snap Ring Use on N Detent s Use on A,C & C-S87 s Included in Std. Solenoid S/A. F3 Solenoid S/A for F3 Applications. Solenoid S/A (See Table) Washer (Omit on A models) Spring (Use on all models except A ) Spring for A models only) Spacer ( A models only; omit on C, -S87 & -S163 models) Washer Guide Snap Ring Retainer Coil Plunger (Nitrile) Gasket (Nitrile) Use on C S163 s Screw Torque to N.m (19-23 lb. in.) Housing (Not available for sale) Printed in U.S.A.

6 Seal Material F3 - Seals for mineral oil and fire resistant fluids (Viton) 2 Electrical Feature (See note below) 3 Series DG5S4 - Directional valve, subplate or manifold mounted, solenoid controlled, pilot operated, sliding spool, flow directions 4 way 4 Solenoid Indicator Lights L - Light Omitted - None 5 Series (1.250 inch) 6 Spool Type Main Stage Spool 7 Valve Type A - Spring offset B - Spring centered (one solenoid) C - Spring centered N - No spring detented 8 Response X - Fast response model Omitted - Low shock model 9 Spool Control Modifications (Omit if not required) 1 - Stroke adjustments 2 - Pilot choke adjustments 3 - Pilot choke & stroke adjustment 7 - Stroke adj. cylinder A end only 8 - Stroke adj. cylinder B end only 10 Pilot Pressure E - External Omitted - Internal 11 PIlot Drain T - Internal Pilot Drain Omitted - External pilot drain 12 Check Valve K bar (5 psi) L bar (2.4 psi) R bar (3.45 psi) S bar (5.2 psi) Omitted - No check valve 13 Voltage & Frequency Omitted - 115AC60 standard 14 Design 15 Left Hand Assembly s with pilot choke DGMFN-5-Y-AW-BW Nut Adj. screw Plate (Bond to plug) Torque N.m lb. ft Rollpin Body (Not available for sale) Torque N.m (30-35 lb. in.) PA - Insta-, Male Receptacle only PB - Insta-, Male & Female Receptacle 1493 Nut Adj. Screw Stop Throttle Spring Rivet Diagram Plate (5 req d) Included in Seal Kit Electrical Feature (Omit if not required) Cover Stroke Adjustment Parts Piston Washer Spring PA3 (3 Pin) & PA5 (5 PIN) receptacles that meet NFPA Hydraulic Valve Electrical Standard T3.5.29M For satisfactory service life of these components in industrial applications, use full flow filtration to provide fluid which meets ISO cleanliness code 20/18/15 or cleaner. Selections from Eaton OFP, OFR, and OFRS series are recommended. Printed in U.S.A.

Directional Controls. Air Gap, Solenoid Controlled, Pilot Operated Directional Control Valves DG5S4(L)-10D(X)--*-53. Service Data Vickers I-3625-S

Directional Controls. Air Gap, Solenoid Controlled, Pilot Operated Directional Control Valves DG5S4(L)-10*D(X)-*-*-53. Service Data Vickers I-3625-S Service Data Vickers Directional Controls Air Gap, Solenoid Controlled, Pilot Operated Directional Control Valves DG5S4(L)-10*D(X)-*-*-53 Revised 9/1/86 I-3625-S Model DG5S4-100D-53 DG5S4-101D-53 DG5S4-102D-53