Vickers. Service Data. Vane Pumps. High Pressure, High Performance Double Vane Pump. 4525VPF Series -21 Design /EN/0396/S
|
|
|
- Jared Green
- 6 years ago
- Views:
Transcription
1 Service Data Vickers Vane Pumps High Pressure, High Performance Double Vane Pump 4525VPF Series -21 Design /EN/0396/S
2 To reverse Cartridge rotation remove Retaining Ring and Bearing Carrier S/A. Install Bearing Carrier S/A and Retaining Ring in opposite end of Cartridge and reinstall Cartridge facing in opposite direction. For R.H. rotation the end of the Cartridge with screw heads showing will be installed toward the cover end. For L.H. rotation the end of the Cartridge with screw heads showing will be installed toward the shaft end. Model Code (Cover End) 4525VPF ** VPF ** 016 Cartridge Kit Standard Viton VPF ** VPF ** VPF ** VPF ** VPF ** VPF ** VPF ** Cartridge Kit, R.H. rotation shown (see table) B.U. Ring (2 Req d) O Ring (2 Req d) O Ring (2 Req d) B.U. Ring (2 Req d) Bearing Carrier S/A Retaining Ring O Ring A SAE Housing B Metric Housing 1357 Screw (4 Req d) Dry Torque to Nm ( lb.ft.) Oiled Torque to Nm ( lb.ft.) A SAE Cover B Metric Cover Screw (4 Req d) Dry Torque to Nm ( lb.ft.) Oiled Torque to Nm ( lb.ft.) Eaton Hydraulics, Incorporated 2000, All Rights Reserved Parts prefixed with symbols are available only in kits. Available in Std Seal Kit, Single Shaft Seal or Viton Seal Kit, Single Shaft Seal only. Available in Std Seal Kit, Double Shaft Seal or Viton Seal Kit, Double Shaft Seal only. Included in Flange Kits (see table). Included in Cartridge Kits (see table). Viton is a registered trademark of the E.I. DuPont Co. NOTE: Lubricate all parts and seals with a thin coat of oil at assembly. Shaft Seal Options A Primary seal only: spring loaded sealing member facing inward. B Primary and secondary seals: primary seal with spring loaded sealing member facing inward and secondary seal with spring loaded sealing member facing outward. C Primary and secondary seals: both with spring loaded sealing member facing inward.
3 Model Code (Shaft End) 4525VPF 140 *** 4525VPF 160 *** 4525VPF 180 *** 4525VPF 195 *** Standard Viton Key (see table) Cartridge Kit (see table) Bearing Carrier S/A O Ring (2 Req d) B.U. Ring (2 Req d) Shaft (see table) 1738 Bearing Retaining Ring Retaining Ring Retaining Ring O Ring (2 Req d) B.U. Ring (2 Req d) Retaining Ring Shaft Seal (see shaft seal options A, B and C) A SAE Body B Metric Body O Ring Flange (see table) Retaining Ring (see shaft seal options B and C) Shaft Seal (double shaft seal only) O Ring 1114 Screw (4 Req d) Dry Torque to Nm ( lb.ft.) Oiled Torque to Nm ( lb.ft.) Flange Type SAE J (SAE C) ISO 3019/2 125A2HW SAE J (SAE D) ISO 3019/2 160A2HW Flange Kit Single Shaft Seal Double Shaft Seal Model Code 4525VPF *** *** * * VPF *** *** * * VPF *** *** * * VPF *** *** * * VPF *** *** * * 06 Shaft Key
4 Model Code Series designation (frame size) 4525VPF 150 to 275 cm 3 /r (9.15 to in 3 /r) 2 Displacement front section cm 3 /r (8.54 in 3 /r) cm 3 /r (9.76 in 3 /r) cm 3 /r (10.98 in 3 /r) cm 3 /r (11.90 in 3 /r) 3 Displacement rear section cm 3 /r (0.61 in 3 /r) cm 3 /r (0.97 in 3 /r) cm 3 /r (1.52 in 3 /r) cm 3 /r (1.95 in 3 /r) cm 3 /r (2.44 in 3 /r) cm 3 /r (3.05 in 3 /r) cm 3 /r (3.84 in 3 /r cm 3 /r (4.33 in 3 /r) cm 3 /r (4.88 in 3 /r) 4 Port connection A SAE 4-bolt flange B Metric 4-bolt flange 5 Flange mounting style A SAE J (SAE C) B ISO 3019/2 125A2HW C SAE J (SAE D) D ISO 3019/2 160A2HW 6 Shaft 01 SAE J (1.25 in keyed shaft) 02 SAE J (C splined shaft) 03 ISO 3019/2 E32N (32mm keyed shaft) 05 SAE J (1.50 in keyed shaft) 06 SAE J (C C splined shaft) 7 Shaft seal A Single, primary (spring side in) B Double, secondary (spring side out) C Double, secondary (spring side in) 8 Seal type N Standard, Buna N V Viton W Buna N with Viton shaft seal(s) 9 Outlet port no. 1 position (viewed from cover end) A Opposite B 90 counterclockwise from C Inline with D 90 clockwise from 10 Outlet port no. 2 position (viewed from cover end) A 135 counterclockwise from B 45 counterclockwise from C 45 clockwise from D 135 clockwise from Design Rotation (viewed from shaft end) R Right hand (clockwise) L Left hand (counterclockwise) Viton is a registered trademark of the E.I. DuPont Co. Typical sectional view
5 Eaton Hydraulics Highway 5 Eden Prairie, MN Telephone: Fax: New Lane, Havant Hampshire PO9 2NB England Telephone: (44) Fax: (44) Form No Copyright Eaton Corporation, 0000 All rights reserved. Printed in U.S.A
Vickers. Service Data. Vane Pumps. Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * I-3154-S. Rev. 2/98
Service Data Vickers Vane Pumps Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * Rev. 2/98 I-3154-S MODEL VTA VTB VTBP ADAPTER ADAPTER PLATE KIT 584936 941296 584922 941297 FOR BP MODELS AN ADAPTER
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24535S Series 32 Design
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24535S Series 32 Design High Pressure, High Performance Double Vane Pump VMQ24535S Series 32 Design Note: Lubricate all parts and seals with
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24525S Series 32 Design
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24525S Series 32 Design High Pressure, High Performance Double Vane Pump VMQ24525S Series 32 Design Note: Lubricate all parts and seals with
EN Char-Lynn. Disc Valve Motor. Parts Information Series Geroler Motors. Std., Whl. and Brgl.-004 Std. and Whl.
Char-Lynn Disc Valve Motor 06-01-126 EN-0400 Parts Information 4000 Series Geroler Motors Std., Whl. and Brgl.-004 Std. and Whl.-006 Drive, Main Item No. 6Part No./Length mm [inch] Geroler Item No. 7Part
EN Char-Lynn. Disc Valve Hydraulic Motors. Parts Information Series Geroler Motors Two Speed 001
Char-Lynn Disc Valve Hydraulic Motors 06-0-3 EN-0500 Parts Information 0 000 Series Geroler MotorsTwo Speed 00 0 000 Series Geroler Motor Two Speed - Parts Drawing 5 6 3 6 35 Retainer inside bore of valve
EN Char-Lynn. Spool Valve Hydraulic Motors. Parts Information. W Series Geroler Motors with Parking Brake 004
Char-Lynn Spool Valve Hydraulic Motors 06-0-6 EN-00 Parts Information W Series Geroler Motors with Parking Brake 004 3 39 4 Shuttle (Two Way) 4 40 4 4 39 3 3 4 6 7 0 9b 9a 9 0 Parts Drawing Continued on
EN Char-Lynn. Disc Valve Motors. Parts Information Compact Series Geroler Motors 001
Char-Lynn Disc Valve Motors 0-0-8 EN-0500 Parts Information 4000 Compact Series Geroler Motors 00 Parts Drawing/List Displacement cm 3 /r [in 3 /r] 0 [ 9.8] 00 [.3] 50 [5.4] 305 [9.8] 395 [4.0] 490 [9.8]
3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353)
3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353) Single 35VQH Double 3525VQH Thru-Drive 35VQHT*S Single and Thru- Drive Pumps VQH Series fixed displacement single and
Service Data Vickers. Directional Valves. Wet Armature Solenoid Operated Directional Control Valves DG4V4-01, 1* /EN/0799/S
Service Data Vickers Directional Valves Wet Armature Solenoid Operated Directional Control Valves DG4V4-01, 1* 5050.00/EN/0799/S Spool Table Type Part Number 0 691401 1 691404 2 691400 3 691403 6 691402
Vickers. Overhaul Manual. Transmissions. Adjustable Speed Hydraulic Drives. TR3, PTR3 and MTR3 Series -20 Design
Overhaul Manual Vickers Transmissions Adjustable Speed Hydraulic Drives TR3, PTR3 and MTR3 Series -20 Design Revised 9/1/87 I-1820-S 2 Eaton Hydraulics, Incorporated 2000 All Rights Reserved Table of Contents
EN-0800 (Replaces ) Eaton. Medium Duty Piston Pump. Parts Information. Model Servo Controlled Piston Pump v-04
Eaton Medium Duty Piston Pump 06-06-642 EN-0800 (Replaces 06-642) Parts Information Model 72400 Servo Controlled Piston Pump v-04 Parts Drawing Pump drawn below is typical of a righthand rotation with
No July, Char-Lynn. Disc Valve Motors. Parts Information Series (includes Big 6 see pages 4 and 5) Geroler Motors -005 and -006
Char-Lynn Disc Valve Motors No. 6-7 July, 999 Parts Information 6000 Series (includes Big 6 see pages 4 and 5) Geroler Motors -005 and -006 6 7 6 6 9 4 Disc Valve Motors 6000 Series -005 and -006 Displacement
Series 1 Model Codes
Eaton Heavy Duty Hydrostatic Transmissions No. 11-06-0866su EN 1000 (Supplement Sheet TO 11-866) Series 1 Model s Models 33 through 76 Hydrostatic Transmissions Series 1 Variable Pump Model The following
No October, Char-Lynn. Disc Valve Motors. Parts Information Series Geroler Motors 006
Char-Lynn Disc Valve Motors No. -9 October, 997 Parts Information 00 Series Geroler Motors 00 Disc Valve Motors 00 Series Displacement cm 3 /r [in 3 /r] 80 [ 4.9] 00 [.] 30 [ 8.0] 0 [ 9.] 95 [.9] 45 [4.9]
Char-Lynn Hydraulic Motor. Parts Information. R Series General Purpose Geroler Motor January, 1995
Char-Lynn Hydraulic Motor January, 1995 Parts Information -001-002 General Purpose Geroler Motor 001 002 Parts Dwg/List -002-002 -001-002 -001 Displ. cm 3 /r Ref. No. 13 Ref. No. 16 Ref. No. 19 [in 3 /r]
Directional Controls
Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10
Piston Pumps. Low Noise Industrial Piston Pump. Vickers
Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2 * *** - ** * * - 20 C** *** *** * - 12/1/21/0 PVQ 45-B2 * *** - ** * * - 20 C** *** *** * - 12/1/21/0 5006.00/EN0799/S C**,
Vane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi)
Vickers Vane Pumps VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) 5008.00/EN/0596/A A.25 Introduction From the
Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
SM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi)
Vickers Servo Valves SM4-10/12/15 Servovalves Flows to 57 l/min (15 USgpm) Pressures to 210 bar (3000 psi) Released 12/93 651 Introduction Vickers SM4-10/12/15 servovalves can provide system closed loop
Single, Double, Triple, and Thru-Drive Pumps Overhaul Service Manual
Single, Double, Triple, and Thru-Drive Pumps Overhaul Service Manual VMQ125S VMQ135S VMQ145S VMQ125T VMQ135T VMQ145 VMQ22525 VMQ23525 VMQ24525 VMQ24535 VMQ3352525 VMQ3453525 Series 30 Design Table of Contents
T-Brake Motor Parts Information
T-Brake Motor Parts Information 2 4 5 6 7 8 9 1 3 10 14 15 14 13 32 31 33 16 34 14 20 35 36 33 34 30 29 29 28 27 20 26 25 24 REFERENCE NUMBER 13 REFERENCE NUMBER 16 REFERENCE NUMBER 28 Displ. Length Width
Vane Pumps. Single Stage Single and Double Vane Pumps. Vickers. Overhaul Manual
Vickers Vane Pumps Overhaul Manual Single Stage Single and Double Vane Pumps V14, 124, 134,144 V19, 129, 139, 149 V15, 125, 135, 145 V35*, 36*, 45*, 46* V18, 128, 138, 148 (V)VF-**-**, (V)VG-**-** Reprinted
SM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi)
Vickers Servo Valves SM4-30 Servovalves Flows to 113 l/min (30 USgpm) Pressures to 140 bar (2000 psi) Released 1/94 653 Introduction Vickers SM4-30 servovalves can provide system closed loop control with
VT67DB Double vane pump
ervice Information 4-000 Double vane pump. 0 9 0q 9q 4 5 6 8 Mounting torque Item pos. N-m 68 8 ft-lbs 50 8 8b 8a 8d 8c ITEM 0q INCLUDED 0d 0h 0g 0f haft Code - 0e 0c 0b 0a haft Code - haft Code - haft
PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C**
Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator
Vickers. Servo Valves. SM4-40 Servovalves. Flows to 151 l/min (40 USgpm) Pressures to 350 bar (5000 psi) Released 1/94
Vickers Servo Valves SM4-40 Servovalves Flows to 151 l/min (40 USgpm) Pressures to 350 bar (5000 psi) Released 1/94 654 Introduction Vickers SM4-40 servovalves can provide system closed loop control with
Vickers 45. VMQ Series 30 Vane Pumps. Fixed Displacement, For Industrial and Mobile Applications (4.188)
[ (4.188) 49,4 (1.94) /21,8 /.86) 174,7/172,3 (6.88/6.78) 332,9/33,5 (13.11/13.1) "M" is marked if metric port threads No marking if inch port threads AS-568-152 O-ring Vickers 45 65,3 (2.57) 13 (5.1 VMQ
Directional Valves. Pilot Operated Directional Valves. Vickers. Service Data
Service Data Vickers Directional Valves Pilot Operated Directional Valves Eaton Hydraulics, Incorporated 14615 Lone Oak Road Eden Prairie, Minnesota 55344-2287 U.S.A. 5007.04/EN/0799/S DG5V - 8 - S/H -
HPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
Char-Lynn T-Series General Purpose Geroler Motor
Char-Lynn T-Series General Purpose Geroler Motor Parts Subject and title repair manual -001 Table of contents Description Page no. Parts 3 Parts list 4-5 How to order replacement parts 6 Tools required
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. L2 Series Model Gear Pumps. Gear Pumps.
H y d r a u l i c s ydraulics Eaton Gear Pumps h y d r a u l i c s L2 Series Model 25500 Gear Pumps We Manufacture No. 11-605 Revised March 1998 Solutions S o l u t i o n s L2 Series Model 25500 High Pressure
Disc Valve Motors Integral Cross Over Relief Valve Technical Manual 2000 Series
Disc Valve Motors Integral Technical Manual 2000 Series Introduction Eaton Char-Lynn, your proven low speed high torque motor supplier, now offers the Char-Lynn 2000 Series motor with our proven Eaton
VT6ED - VT6EDM - VT6EDP Double vane pump
ervice Information 4-0007 - M - P Double vane pump. 3 4 Bold printed are recommended repair kits and assemblies 0r 0 9 9r 6 Mounting torque Item pos. 4 5 ft-lbs 38 38 N-m 87 87 7 7 8 b P 8b 8a 8d 5 0g
High Speed, High Pressure Vane Motors
ENGINEERING DATA High Speed, High Pressure Vane Motors M - Motors 25M, 35M, 45M, 5M w w w. F l u i D y n e F P. c o m E m a i l : c s @ F l u i D y n e F P. c o m Dependable Versatile The M Motor is a
Double Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
Solutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
Electronic Proportional (EP) Control for Heavy Duty Series 0/1 Piston Pumps Model 33 Model 39 Model 46. Model 54 Model 64 Model 76
Electronic Proportional (EP) Control for Heavy Duty Series 0/1 Piston Pumps Model 33 Model 39 Model 46 Model 54 Model 64 Model 76 Table of Contents Introduction.......................................................
RE (Remote Electric) Control
Installation Infmation No. 04-06-0424-EN-1000 Revised October, 2000 s 04-424 Heavy Duty Series 0 and 1 Eaton Pump Controls RE (Remote Electric) Control Eaton Hydraulics 15151 Highway 5 Eden Prairie, MN
No July, Eaton. Hydraulic Motor. Repair Information. 30 Series VIS Bearingless Motor 002
Eaton Hydraulic Motor No. 7-150 July, 1996 Repair Information 30 Series VIS Bearingless Motor 002 30 Series Geroler Motors 2 Disassembly Plug/ Shims Valve Plate Geroler Check Ball Drive Relief Valve Parts
Eaton Vickers V VQ Vane Pump Cartridge
Eaton Vickers V VQ Vane Pump Cartridge Features Replacement parts for fixed displacement vane pumps (single and double vane pump V/VQ series). Available in both 12 vanes design for industrial application
No May, Eaton. Hydrostatic Transaxle. Parts Information. Series 851
Eaton Hydrostatic Transaxle No. 6-6 May, 999 Parts Information Series 85 Series 85 3 5 6 6 (Qty. 5) 7b 7 8 6 (Qty. 3) 7a 6b 9 0 a 8 3 5 5 53 7 8 0 55 6a 7 6 (Qty. ) 9 9 5 0a 8 B-Side 0a 5 3 8 9a 9 J K
Vickers. Vane Pumps. V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications.
Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications Revised 6/95 560 Introduction Vickers offers the most complete line of hydraulic intravane
Char-Lynn. Parts Information. 217 Series and 227 Series Torque Generator 002. Power Steering OUT OUT. No November, 1996
Char-Lynn Power Steering No. 6-34 November, 6 Parts Information 7 Series (Gerotor Unit) 7 Series (Geroler Unit) 7 Series and 7 Series Torque Generator 00 Torque Generator Parts Drawing 700 7 Series (Gerotor
Eaton. Parts Information. Transaxle Series 751. Hydrostatic Transaxle. No May, 1999
Eaton Hydrostatic Transaxle No. 6-45 May, 999 Parts Information Transaxle Series 75 Series 75 3 4 5 6 7 50 47 48 5 49 8 Barb Fitting or Plug 5 Port Plate (Horizontal Mount) 9 0 48 6 4a 4 7a 53 7 3 8 0
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Hydraulic Motors: h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Hydraulic Motors: http://www.charlynn.com 00--0 h y d r a u l i c s General Purpose Motors We Manufacture No. - October 1 Solutions S o l u t i o n s Features Integrated
IFP FIXED DISPLACEMENT PISTON MOTORS MFB5/10/20/29
IFP FIXED DISPLACEMENT MOTORS MFB5/10/20/29 High Efficiency Wide Speed Range Extended Life Reversable Compact Quiet Operation High Operating Pressure C:\wliu\MFB1.bmp Piston Motor Ordering Specification
No July, Char-Lynn. Power Steering. Parts Information. 110, 230, and 450 Series Steering Contol Units
Char-Lynn No. 6-321 July, 1999 Parts Information Steering Contol Units 001 002 1 2 O-ring Groove 3 O-ring Groove 4 7 3 6 5 Low Input Torque Spring (4)/Spacer (2) Package Standard Input Torque Spring (6)
Electronic Proportional (EP) Control for Medium Duty Piston Pumps
Electronic Proportional (EP) Control for Medium Duty 72400 Piston Pumps EP Control for Medium Duty 72400 Piston Pumps Table of Contents Introduction........................................................................
Hydrokraft Piston Motors Technical Catalog MVX
Hydrokraft Piston Motors Technical Catalog MVX Table of Contents Introduction.......................................................................... 3 Model Code Form Page........................................................................
Eaton Electronic Proportional (EP) Control for Medium Duty Piston Pumps
Eaton Electronic Proportional (EP) Control for Medium Duty 72400 Piston Pumps Table of Contents Introduction....................................................... 3 Identification of Components.........................................
No January, Char-Lynn. Power Steering. Parts Information. 3, 4, 6, and 12 Series Steering Contol Units
Char-Lynn Power Steering No. 6-317 January, 1998 Parts Information Steering Contol Units 001 002 Cap Screws 12 Pt. Drive No. 5389-, Spacer Plate 7970, and End Cap, 8438 (21888 Series 4) are -001 Parts.
Eaton. Parts Information. Transaxle Series 781. Hydrostatic Transaxle. No May, 1999
Eaton Hydrostatic Transaxle 6-49 May, 999 s Information Transaxle Series 78 Series 78 3 4 5 6 7 50 47 48 5 49 8 Barb Fitting or Plug 5 Port Plate (Horizontal Mount) 9 0 48 6 4a 4 7a 53 7 3 8 0 9 50 5 0a
Electronic Proportional (EP) Control for Heavy Duty Series 2 Piston Pumps Model 33
Electronic Proportional (EP) Control for Heavy Duty Series 2 Piston Pumps Model 33 Model 39 Model 46 Model 54 Model 64 EP Control for Heavy Duty Series 2 Piston Pumps Table of Contents Introduction........................................................................
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Model 30540, 15 GPM Directional Control Valves
h y d r a u l i c s H y d r a u l i c s ydraulics Eaton Directional Control Valves We Manufacture No. 11-56 Revised April, 1996 Model 354, 15 GPM Directional Control Valves Solutions S o l u t i o n s
vane pumps Vane Pumps Prices Shaft and Cartridge Prices
Vane Pumps vane pumps Vane Pumps Prices Shaft and Cartridge Prices Seal Kit Prices Single Pump Dimensions Single Pump Model Code Vane Pumps Technical Info Double Pump Ordering Code Double Pump Dimensions
Eaton. Parts Information. Standard Charge Pump, A-Pad and B-Pad Charge Pumps. Heavy Duty Hydrostatic Pumps. No August, 1999
Eaton Heavy Duty Hydrostatic Pumps -0 August, 999 Parts Information Standard Charge Pump B-Pad Charge Pump Standard Charge Pump, A-Pad and B-Pad Charge Pumps A-Pad Charge Pump Charge Pump Parts 7 5 (see
ENGINEERING DATA. Quick Reference Chart. Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted. Industrial Hydraulics
ENGINEERING DATA Industrial Hydraulics Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted SYMBOL Quick Reference Chart GPM @ MAXIMUM PRESSURE THEORETICAL INPUT HP MODEL 100 PSI &
Variable Axial Piston Eaton Vickers PVH Pump
Variable Axial Piston Eaton Vickers PVH Pump PVH High pressure axial piston pumps with low noise PVH high flow, high performance pumps are a family of variable displacement, inline piston units that incorporate
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Hydraulic Motors. h y d r a u l i c s. General Purpose Motors A Series
H y d r a u l i c s ydraulics Char-Lynn Hydraulic Motors h y d r a u l i c s General Purpose Motors We Manufacture No. 11-876 October 19 Solutions S o l u t i o n s 2 A Gerotor Element... 11 Displacements...
Service Data Vickers. Directional Controls. Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 I-3624-S. Revised 9/1/86
Service Data Vickers Directional Controls Pilot Operated Directional Control Valves DG5S4-10**-*-*-53 Revised 9/1/86 I-3624-S Installation Table A DG5S4-10**-53 Does DG5S4-10**-E-53 Not DG5S4-10**-X-53
Eaton. Parts Information
Eaton Medium Duty Piston Pump No. 6-632 August, 1995 Parts Information Model 70142 / 70144, 20.3 cm 3 /r [1.24 in 3 /r] Displacement and 70145, 23.6 cm 3 /r [1.44 in 3 /r] Displacement Variable Displacement
Char-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090
Spare Parts List PVR-* - * -RAA-4/4 PVR-* - * -RAA-4/4 PVR-* - * -RAA-/ PVR4-* - * -RAA-/ 4 5 4 6 8 8 6 5 4 Y Section Y-Y Y 6 5 Section - 8 Cartridge Kits Model Numbers PVR-6- * -RAA-4 * PVR-8- * -RAA-4
Mobile Valves Proportional - Load Sensing
Mobile Valves Proportional - Load Sensing Model CML60 325 bar 60 L/min Up to 8 sections Eaton F(x) Compliant Table of Contents General Information... 3 Model Code Valve Section... 4 Valve Assembly... 5
(F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) (EN***)
Service Data Vickers Directional Valves Pilot Operated Directional Valves (F*) - DG5V -10- * - (R) - (B) - **(L) - (**) - (X) - (*) - (E) - (T) - (*) - (V)M - (S*) - * ** * * (L) - (*) ** - (***) - 10
Vickers. Proportional Valves. EPV16 Series Valvistor Proportional Flow Controls
Vickers Proportional Valves EPV6 Series Valvistor Proportional Flow Controls Vickers, Incorporated, 998 All rights reserved Features and Benefits The EPV (Electro Proportional Valve) series of poppet valves
XCEL80 Steering Control Units
XCEL80 Steering Control Units XCEL80 Steering Unit SEPECIFICATION DATA Max. System Pressure 175 bar [2537 psi] Max. Back Pressure 21 bar [305 psi] Rated Flow 75 LPM [20 GPM] Input Torque Powered 1.3-2.4
Directional Controls. Solenoid Controlled Pilot Operated Directional Valve. Vickers DF5S4(L)-16*A/B/C/N-(*)-(E)*-53. Service Data I 3622-S
Service Data Vickers Directional Controls Solenoid Controlled Pilot Operated Directional Valve DF5S4(L)-16*-(*)-(E)*-53 Revised 2/01/98 I 3622-S See back page for solenoid indicator lights. Pilot Attaching
High Pressure Single Vane Pump T6C/T6D Series
High ingle Vane Pump T6C/T6D eries Features T6C and T6D eries are fixed displacement and balanced type single vane pumps. The pump is designed for higher operating pressure and greater flow at the same
Constant Speed Control
Eaton Heavy Duty Hydrostatics No. 4-51 June, 1995 Installation & Operating Instructions Constant Speed Control Operating Instructions for Constant Speed Control (The valve package, speed sensor and electronic
Vickers Vane Pumps V Series - Low Noise Vane Pumps. High Performance Intravane Pumps For Industrial Applications
Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power
Check valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Gear Pumps. h y d r a u l i c s. Series 26 Model Gear Pumps.
H y d r a u l i c s ydraulics Eaton Gear Pumps h y d r a u l i c s Series 26 Model 26 Gear Pumps We Manufacture No. 11-69 Rev. November 1997 Quiet Operation Improved Efficiency Field Reversible Solutions
Global Gear Products. Brochure. SAE A-Aluminum (Group 2)
Global Gear Products Brochure SAE A-Aluminum (Group 2) High Efficiency, Low Noise Applications for Eaton Gear Products Turf care Agriculture tractors and harvesters Lift trucks Skidsteer loaders Fan drive
No May Eaton. Medium Duty Piston Pump. Parts Information. Model and 74644, 82,6 cm 3 /r [5.04 in 3 /r] Displacement design code B
![No May Eaton. Medium Duty Piston Pump. Parts Information. Model and 74644, 82,6 cm 3 /r [5.04 in 3 /r] Displacement design code B](/thumbs/90/102843087.jpg "No May Eaton. Medium Duty Piston Pump. Parts Information. Model and 74644, 82,6 cm 3 /r [5.04 in 3 /r] Displacement design code B")
Eaton Medium Duty Piston Pump No. 06-161 May 99 Parts Information Model 74624 and 74644, 82,6 cm 3 /r [5.04 in 3 /r] Displacement design code B Model 74624 and 74644 2 Model 74624 and 74644 Identification
VHO Vane Pumps ENGINEERING DATA. Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance
ENGINEERING DATA VHO Vane Pumps Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance www.fluidynefp.com Table of Contents Performance Data...2 Model
EATON 750, 780 HYDROSTATIC TRANSAXLE
EATON 750, 780 HYDROSTATIC TRANSAXLE Table of Contents Page of TRANSAXLE SERIES 750 TRANSAXLE PARTS DRAWING TRANSAXLE PARTS LIST TOOL REQUIREMENTS PRODUCT IDENTIFICATION AND ORDERING INFORMATION COMPLETE
PVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
FIXED DISPLACEMENT VANE PUMPS
FIXED DISPLACEMENT VANE PUMPS Single Vane Pumps Double Vane Pumps Thru-Drive Vane Pumps HS - HQ - VH - SERIES Working pressure: up to 210 bar Displacements: from 3 cc to 200 cc Pumps, cartridges and spare
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Directional Control Valves. h y d r a u l i c s. Models and 31930
H y d r a u l i c s ydraulics Eaton Directional Control Valves h y d r a u l i c s Models 319 and 3193 with Pilot Operated Checks We Manufacture No. 11-5 March 1996 Solutions Directional Control Valves
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS * High Volumetric Efficiency * Maximum 3000 PSI operating pressure * Twelve Vane Design for quite operation * Hydraulic Balanced for external life
Eaton Hydrostatic Transaxle. Parts Information. Transaxle Series 751. May, 1999
Eaton Hydrostatic Transaxle May, 999 Parts Information Transaxle Series 75 Series 75 3 4 5 6 7 50 47 48 5 49 8 Barb Fitting or Plug 5 Port Plate (Horizontal Mount) 9 0 48 6 4a 4 7a 53 7 3 8 0 9 50 0a 5
D SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
Industrial Hydraulic Pumps T7DBB, T7DBBS. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7DBB, T7DBBS Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you
MOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
HPV-10 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT
HPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT
SCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
RA-20 Paint/Solvent/Dump Valve
Instruction Sheet P/N 74B0 RA-0 Paint/Solvent/Dump Valve Description The paint/solvent valve is a normally closed valve used to trigger coating material. The valve may be used alone to actuate paint or
Vickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
Char-Lynn Hydraulic Motor. Repair Information Series. April, 1997
Char-Lynn Hydraulic Motor April, 1997 Repair Information Geroler Motors 002 00 004 Parts Drawing 1 See Note 2 Page 1 22 1 9 1-1/4 Split Flange Ports 8 7 6 5 B 1 See Note 2 Page 2 24 4 14 19 20 15 1 18
Eaton. Repair Information. Model and Piston Motors Fixed Displacement, Valve Plate Design. Medium Duty Piston Pump NO.
Eaton Medium Duty Piston Pump NO. 7-141 Repair Information Model 74318 and 74348 Piston Motors Fixed Displacement, Valve Plate Design Parts Drawing 8 1 2 3 4 5 6 5 4 7 22 23 Rear or Opposite side Porting
420 Mobile Piston Pump Service Parts Manual ADU041, ADU049, ADU062
420 Mobile Piston Pump Service Parts Manual ADU041, ADU049, ADU062 Exploded Assembly 420 Series Pumps 40 24 58 50 23 23 36 42 22 54 38 12 56 2 16 52 4 30 55 12 55 33 32 14 6 52 57 18 10 8 28 3 1 26 2 EATON
Char-Lynn Power Steering. Parts Information. 110, 230, and 450 Series. July, 1999
Char-Lynn Power Steering July, 1999 Parts Information Steering Contol Units 001 002 1 2 O-ring Groove 3 O-ring Groove 4 7 3 6 5 Low Input Torque Spring (4)/Spacer (2) Package Standard Input Torque Spring
Genuine Metaris MA10VO/VSO Technical Catalog. Variable Displacement Piston Pump - A10V Series 31 & 52
Genuine Metaris MA10VO/VSO Technical Catalog www.metaris.com Contents General Series MA10VO/VSO Series 31 4 Page Features 4 Technical Data 5 Performance Information 6 Model Code Breakdown 9 Fluid Info
220 Piston pump Service manual AEC 028
220 Piston pump Service manual AEC 028 2 EATON 220 Piston Pump Service Manual E-PUMC-RR001-E3 November 2017 Table of Contents Service Parts Parts identification... 4 Exploded assembly... 6 Optional assembly...
HPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09
J Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands