T-Brake Motor Parts Information

Transcription

1 T-Brake Motor Parts Information

2 REFERENCE NUMBER 13 REFERENCE NUMBER 16 REFERENCE NUMBER 28 Displ. Length Width Length in./r Drive mm [in.] Geroler mm [in.] Cap Screw mm [in.] 36 [ 2.2] ,4 [3.60] ,6 [.26] ,8 [2.00] 49 [ 3.0] ,0 [3.70] ,9 [.35] ,8 [2.12] 66 [ 4.0] ,1 [3.82] ,9 [.47] ,2 [2.25] 80 [ 4.9] ,8 [3.93] ,7 [.58] ,5 [2.38] 102 [ 6.2] ,4 [4.19] ,5 [.73] ,5 [2.50] 131 [ 8.0] ,2 [4.30] ,9 [.94] ,9 [2.75] 157 [ 9.6] ,3 [4.50] ,9 [1.14] ,1 [2.88] 195 [11.9] ,7 [4.76] ,6 [1.40] ,2 [3.12] 244 [14.9] ,0 [5.12] ,5 [1.75] ,9 [3.50] 306 [18.7] ,5 [5.57] ,1 [2.21] ,6 [4.00] 370 [22.6] [6.03] ,8 [2.67] ,0 [4.25] 2 EATON Char-Lynn T-Brake Hydraulic Motor Parts Brochure C-MOLO-TP003-E January 2004

3 REF. NO. PART NUMBER DESCRIPTION QTY. PER UNIT Screw, Cap (6 Point (E10) Drive 5/16-24 x 7/8) Flange Mounting (2 Bolt) Flange Mounting (4 Bolt) 3/8-16 UNC Flange Mounting (2 Bolt SAE B) Flange Mounting (4 Bolt Magneto) Flange Mounting (4 Bolt) M10 x 1,5 1 X Seal, Exclusion 1 X Washer, Backup 1 X Seal, Pressure 1 X Seal Race, Thrust Bearing Bearing, Thrust Needle Shaft, Output 1 (1 in. Dia. Straight with Woodruff Key Slot) Shaft, Output (SAE 6B Splined) Shaft, Output 1 (1 in. Dia. Straight with.315 Dia. Crosshole) Shaft, Output 1 (1 in. Dia. Straight with.406 Dia. Crosshole) Shaft, Output (7/8 in. Dia. SAE B 13 T Splined) Shaft, Output (25 mm Dia. Straight) Key, Woodruff (1 in. Dia. Tapered Shaft) Key, Straight (for 7/8 in. Dia. Shaft) Key, Woodruff (for 1 Dia. Shaft) Key, Straight (for 7/8 Dia. Straight Shaft) Nut, (for Tapered Shaft) Key, Straight (for 25 mm Dia. Shaft) Housing, 7/8-14 O-ring Ports Housing, Manifold Ports (5/16-18 UNC) Housing, Manifold Ports (M8 x 1.5) Housing, (G 1/2 (BSP)) 1 11 N/A O-ring 1 12 N/A Plug 1 13 * Drive 1 X Seal Plate, spacer 1 16 * Geroler Collar Brake Shaft Bearing Housing, Brake (7/16-20 Brake Release Port) Housing, Brake (G 1/4 Brake Release Port) 1 EATON Char-Lynn T-Brake Hydraulic Motor Parts Brochure C-MOLO-TP003-E January

4 Note: Seal kits below do not include brake seals. REF. NO. PART NUMBER DESCRIPTION QTY. PER UNIT Stationary Plate Pad, Friction S/A Piston Seal, Piston Washer Spring, Belleville End Cap Seal, End Cap Plug S/A Seal Kit (Buna N) Contains Parts Indicated by X Seal Kit (same as above with one exception - Shaft Seal is Viton ) Seal Kit (Viton) Contains Parts Indicated by X (Part No.s Differ from those Shown) How to Order Replacement Parts Each Order Must Include the Following: 1. Product Number 2. Date Code 3. Part Name 4. Part Number 5. Quantity of Parts For More Detailed Information Contact Eaton Corp. Hydraulics Division Highway 5 Eden Prairie, MN Specifications and performance data, Catalog No When servicing Steering Control Unit refer to Repair Information No This repair manual lists tools required, step by step disassembly and reassembly procedures. Char-Lynn Eaton Corp. Hydraulics Div. Eden Prairie, MN Product Line Identification Number Product Number Product Identification Number Week of Year 01 Thru 52 Date Code Engineering Change Code Last Number(s) of Year 4 EATON Char-Lynn T-Brake Hydraulic Motor Parts Brochure C-MOLO-TP003-E January 2004

5 PRODUCT NUMBERS T-BRAKE SERIES Add three digit prefix 185-to four digit number from chart for complete product number Example Orders will not be accepted without three digit prefix. Part# Mounting Shaft Ports Prefix " Keyed 7/8-14 O-ring Bolt 4-Bolt 2-Bolt SAE B Manifold B Splined 7/8-14 O-ring Manifold T Splined 7/8-14 O-ring /32 pitch Manifold " Keyed 7/8-14 O-ring Manifold B Splined 7/8-14 O-ring Manifold T Splined 7/8-14 O-ring /32 pitch Manifold " Keyed 7/8-14 O-ring Manifold B Splined 7/8-14 O-ring Manifold T Splined 7/8-14 O-ring /32 pitch Manifold PRODUCT NUMBERS WITH LOW SPEED VALVING T-BRAKE SERIES Part# Mounting Shaft Ports Prefix " Keyed 7/8-14 O-ring Bolt 4-Bolt 2-Bolt SAE B Manifold B Splined 7/8-14 O-ring Manifold T Splined 7/8-14 O-ring /32 pitch Manifold " Keyed 7/8-14 O-ring Manifold B Splined 7/8-14 O-ring Manifold T Splined 7/8-14 O-ring /32 pitch Manifold " Keyed 7/8-14 O-ring Manifold B Splined 7/8-14 O-ring Manifold T Splined 7/8-14 O-ring /32 pitch Manifold These motors with the low speed valving option provide very low speed while maintaining high torque. Designed to run continuously at up to 200 RPM at standard rated pressures and reduced flows, provide exceptionally smooth operation at low speeds. Motors with this valving are not intended for low pressure applications (41 Bar [600 PSI] Minimum). Shaft side / radial load ratings are not affected by this valving. EATON Char-Lynn T-Brake Hydraulic Motor Parts Brochure C-MOLO-TP003-E January

6 Notes 6 EATON Char-Lynn T-Brake Hydraulic Motor Parts Brochure C-MOLO-TP003-E January 2004

7 Notes EATON Char-Lynn T-Brake Hydraulic Motor Parts Brochure C-MOLO-TP003-E January

8 Eaton Lone Oak Road Eden Prairie, MN USA Tel: Fax: Eaton 20 Rosamond Road Footscray Victoria 3011 Australia Tel: (61) Fax: (61) Eaton Dr.-Reckeweg-Str. 1 D Baden-Baden, Germany Tel: +49 (0) Fax: +49 (0) Eaton Corporation All rights reserved Printed in USA Document No. C-MOLO-TP003-E January 2004