High Speed, High Pressure Vane Motors
|
|
- Clara Davis
- 6 years ago
- Views:
Transcription
1 ENGINEERING DATA High Speed, High Pressure Vane Motors M - Motors 25M, 35M, 45M, 5M w w w. F l u i D y n e F P. c o m E m a i l : c F l u i D y n e F P. c o m
2 Dependable Versatile The M Motor is a proven design that has been operating in the field for decades. They are available with either standard or heavy duty bearings. This motor design can operate at as low as 1 rpm to as high as 3, rpm at maximum pressures. It can run at faster speeds as system pressures decrease. These motors start out with high efficiencies, and operates at those levels throughout the life of the motor. This is inherent in this vane motor design. Because both ports can be pressurized at the same time, the M-Motor is perfect for multiple motors connected in series. The bi-rotational design of these motors lends itself to quick reversal motion. They can be stalled at as high as 65% of maximum pressure rating at 12r/min without damage. The heavy duty bearing allows for indirect drive options such as gears, belts and pulleys. Several port position configurations are available. Serviceable The internal rotating parts are self contained in a cartridge kit in this design. This makes this motor easily field serviceable. In most cases the motor can stay in place while the ring, rotor, and vanes are replaced with new. Port orientation adjustments too can be done in the field. Model Codes 25 M 65 A Series 25M 35M 45M 5M 26M 36M 46M 51M *** 8 Mounting Flange & Port Connections A SAE type 2-bolt mounting flange and SAE 4-bolt flange connections 4 Standard Po bearing and Heavy duty bearing Vane Motor Ring Size - Nom. Torque Rating (lb. in./1 psi) 25M 42, 55 & 65 35M 8, 95 & M 13, 155 & 185 5M 22, 255 & C Special Features Suffix *5M only * See speci cation notes for max pressures, etc. Shaft 1 Straight keyed (Optional) 11 Splined (STD) 5 Cover Position (Viewing cover end) A Cover port opposite body port B Cover port 9 CCW from body port C Port connections in line D Cover port 9 CW from body port 6 7 Design cs@fluidynefp. com www. FluiDyneFP. com 2
3 Physical Specifications M odel S eries M ounting Std S haft S plined Optional S haft K eyed A pprox W eight kg (lb) 25M SAE B 2 Bolt 7/8-13 Tooth 7/8 X.187 Key 18 (4) 35M SAE C 2 Bolt 1 1/4-14 Tooth 1 1/4 X.312 Key 29 (64) 45M SAE C 2 Bolt 1 1/4-14 Tooth 1 1/4 X.312 Key 39 (85) 5M SAE D 2 Bolt 1 3/4-13 Tooth 1 3/4 x.437 Key 73 (16) Performance Specifications Model Se ries Torque N m /6,9 bar (lb. in./ 1psi) Dis placem ent cm 3 /r (in 3 /r) Flow 12 r/min L/m in (U S gpm ) M ax. T orque N m (lb. M ax. Pressure M axim um S peeds & Pressure 25M 35M 45M 5M 4,7 (42) 43,9 (2.68) 52,7 (13.9) 115,8 (125) 6,2 (55) 57,7 (3.52) 69,4 (18.3) 151,4 (134) 7,3 (65) 68,7 (4.19) 82,6 (21.8) 18,8 (16) 9, (8) 83,6 (5.1) 1,4 (26.5) 221,5 (196) 1,7 (95) 1,3 (6.12) 12,5 (31.8) 264,4 (234) 13, (115) 121,9 (7.44) 146,3 (38.6) 32,9 (284) 14,7 (13) 138, (8.42) 165,6 (43.7) 361,6 (32) 17,5 (155) 163,2 (9.96) 195,9 (51.7) 429,4 (38) 2,9 (185) 193,2 (11.79) 232,3 (61.3) 52,9 (445) 24,9 (22) 28,8 (255) 33,9 (3) 231,3 (14.11) 277,8 (73.3) 268,2 (16.36) 322,2 (85.) 317,2 (19.35) 38,7 (1.5) 615,9 (545) 717,6 (635) 844,1 (747) bar (5 psi) 4 34 bar (5 psi) bar (225 psi) bar (25 psi) bar (5 psi) bar (5 psi) bar (225 psi) bar (25 psi) Continuous operation Intermittent operation: 1% of total operating time; each application of pressure and/or speed not to exceed 6 seconds 114 model su x: 25 psi, counterclockwise; 225 psi, clockwise. (Rotation viewed from shaft end) 124 model su x: 25 psi, bi-directional rotation FluiDyne Fluid Power 3 cs@ FluiDyneFP. com www. FluiDyneFP. com
4 Installation Dimensions 25M Motors Port connection pads are for use with SAE 4-bolt flanges. Fluid supply to connection L turns shaft clockwise as viewed from shaft end. Fluid supply to connection K turns shaft counterclockwise. CONNECTION K Ø (1.25) PORT CONNECTION L Ø (1.25) PORT 12,7.5) Ø 11,6/11,55 (4./3.998) #11 SHAFT SAE INVOLUTE SPLINE DATA FLAT ROOT MAJOR DIA FIT 16/32 DIAMETRAL PITCH 13 TEETH 3 PRESSURE ANGLE.749 T.I.F. DIA.8125 PITCH DIA UNC-2B THD 19,1 (.75) DEEP 8 HOLES 1/4NPT 18 THD DRAIN CONNECTION DO NOT RESTRICT 9,65/9,14 (.38/.36) CLOCKWISE ROTATION 117,3(4.62) C 58,7 (2.31) 76,2 (3.) 182,4 (7.18) 148,82 (5.86) 39,15 (1.54 ) 1,5 (.6) 13,5 (.53) 44,5 (1.75) 33,3 (1.31) Ø 146,1 (5.75) Ø 12,7 (4.75) 174,8 (6.88) B D 134,9 (5.31) Ø 27,8 (1.9) A Ø 14,2 (.56) THRU 2 HOLES 22,17/22,15 (.873/.872) MAJOR Ø 18,16 (.715) MIN MINOR Ø 35M Motors Port connection pads are for use with SAE 4-bolt flanges. Fluid supply to connection L turns shaft clockwise as viewed from shaft end. Fluid supply to connection K turns shaft counterclockwise. B 3/8NPT 18 THD DRAIN CONNECTION DO NOT RESTRICT 139,7 (5.5) C A 69,9 (2.75) 88,9 (3.5) D 158,8 (6.25) CONNECTION K Ø 38,1 (1.5) PORT 211,1 (8.31) 17,7 (6.72) 48,3 (1.9 ) CONNECTION L Ø 38,1 (1.5) PORT 15,7 (.62) 12,7/12,2 (.5/.48) 1,5 (.6) 9,7 (.38).5 13 UNC-2B THD 22,2 (.875) DEEP 8 HOLES Ø 127,/126,95 (5./4.998) 62, (2.44) 47,6 (1.875) Ø 35,1 (1.38) Ø 181,1 (7.13) 5.81 DIA. Ø 17,5 (.688) THRU 2 HOLES 31,7/31,67 (1.248/1.247) MAJOR Ø #11 SHAFT SAE INVOLUTE SPLINE DATA FLAT ROOT MAJOR DIA FIT 12/24 DIAMETRAL PITCH 14 TEETH 3 PRESSURE ANGLE 1.82 T.I.F. DIA PITCH DIA CLOCKWISE ROTATION ,42 (1.4) MIN MINOR Ø 4 cs@ FluiDyneFP. com www. FluiDyneFP. com
5 Installation Dimensions 45M Motors Port connection pads are for use with SAE 4-bolt flanges. Fluid supply to connection L turns shaft clockwise as viewed from shaft end. Fluid supply to connection K turns shaft counterclockwise. CONNECTION K Ø 5,8 (2.) PORT CONNECTION L Ø 5,8 (2.) PORT Ø 127,/126,95 (5./4.998) #11 SHAFT SAE INVOLUTE SPLINE DATA FLAT ROOT MAJOR DIA FIT 12/24 DIAMETRAL PITCH 14 TEETH 3 PRESSURE ANGLE T.I.F. DIA PITCH DIA.5 13 UNC 28 THD 22,2 (.875) DEEP 8 HOLES 1/2 NPT 14 THD DRAIN CONNECTION DO NOT RESTRICT B 158,8 (6.25) 79.2 (3.12) C 93,5 (3.68) D 15,7 (.62) 12,7/12,2 (.5/.48) 249,2 (9.81) 197,9 (7.79) 62, (2.44) 52,8 (2.8) 47,8 (1.88) 1,5 (.6) 9,7 (.38) Ø 181,1 (7.13) CLOCKWISE ROTATION 212,9 (8.38) Ø147,6 (5.81) 173, (6.81) Ø39,6 (1.56) A Ø17,5 (.688) THRU 2 HOLES 31,7/31,67 (1.248/1.247) MAJOR Ø 26,42 (1.4) MIN MINOR Ø 5M Motors Port connection pads are for use with SAE 4-bolt flanges. CONNECTION K Ø 63,5 (2.5) PORT FLUID SUPPLY TO CONNECTION K TURNS SHAFT COUNTERCLOCKWISE CONNECTION L Ø 63,5 (2.5) PORT FLUID SUPPLY TO CONNECTION L TURNS SHAFT CLOCKWISE.5 13 UNC 2B THD 1.19 DEEP 8 HOLES Fluid supply to connection L turns shaft clockwise as viewed from shaft end. Fluid supply to connection K turns shaft counterclockwise. Ø11,6 (4.) Ø152,4/152,35 (6./5.998) B 196,9 (7.75) C 98,6 (3.88) 12,7 (4.75) D 1/2 NPT 14 THD DRAIN CONNECTION DO NOT RESTRICT 294,9 (11.61) 22,4(.88) 231,9 (9.13) 69,9 (2.75) 12,7/12,2 (.5/.48) 74,4 (2.93) 6,35 (.25) 66,8 (2.63) #11 SHAFT SAE INVOLUTE SPLINE DATA FLAT ROOT SIDE DIA FIT 8/16 DIAMETRAL PITCH 13 TEETH 3 PRESSURE ANGLE 1.51 T.I.F. DIA PITCH DIA Ø2,2 (7.88) Ø 47,5 (1.87) Ø 228,6 (9.) CLOCKWISE ROTATION 266,7 (1.5) A 219,7 (8.65) 1,5 (.6) REF Ø 36,6 (1.44) Ø 2,6 (.81) THRU 2 HOLES 43,71/43,56 (1.721/1.715) MAJOR Ø 36,63 (1.442) MIN MINOR Ø FluiDyne Fluid Power 5
6 Optional Shafts 25M No. 1 straight keyed shaft 35M & 45M No. 1 straight keyed shaft 58,7 (2.31) 47,8 (1.88) 1,5 (.6) REF 31,8 (1.25) 4,75 (.187) KEY 28,4 (1.12) 7,92 (.312) KEY 35,18/34,93 (1.385/1.375) Ø27,8 (1.93) 24,46/24,31 (.963/.957) Ø22,23/22,2 (.875/.874) Ø 35,1 (1.38) 47,8 (1.88) 1,5 (.6) REF 62, (2.44) Ø 35,18/34,93 (1.25/1.248) 5M No. 1 straight keyed shaft 11,1 (.437) KEY 5,8 (2.) 49,38/49,12 (1.944/1.934) Ø47,5 (1.87) Ø44,45/44,42 (1.75/1.749) 66,8 (2.63) 1,5 (.6) REF 74,4 (2.93) 6
7 Typical Performance 25M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 38 C (1 F) 42 LB. IN. MODEL 55 LB. IN. MODEL 265 (7) 265 (7) 227 (6) 189 (5) 151 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 265 (7) 227 (6) 227 (6) 189 (5) 151 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 265 (7) 227 (6) 114 (3) 189 (5) 114 (3) 189 (5) 76 (2) 151 (4) 76 (2) 151 (4) 38 (1) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 114 (3) 76 (2) 38 (1) 38 (1) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 114 (3) 76 (2) 38 (1) 158,2 (14) 52,2 (7) 135,6 (12) 113, (1) 9,4 (8) 67,8 (6) 45,2 (4) 22,6 (2) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) ,3 (5) 29,8 (4) 22,4 (3) 14,9 (2) 7,5 (1) 135,6 (12) 113, (1) 9,4 (8) 67,8 (6) 45,2 (4) 22,6 (2) 65 LB. IN. MODEL 175BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) ,7 (6) 37,3 (5) 29,8 (4) 22,4 (3) 14,9 (2) 7,5 (1) 265 (7) 227 (6) 189 (5) 151 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 33 (8) 265 (7) 227 (6) 114 (3) 76 (2) 38 (1) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 189 (5) 151 (4) 114 (3) 76 (2) 38 (1) (16) Torque Nm (lb.in.) 158,2 (14) 135,6 (12) 113, (1) 9,4 (8) 67,8 (6) 45,2 (4) 22,6 (2) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 52,2 (7) 44,7 (6) 37,3 (5) 29,8 (4) 22,4 (3) 14,9 (2) 7,5 (1) FluiDyne Fluid Power
8 Typical Performance 35M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 38 C (1 F) 8 LB. IN. MODEL 95 LB. IN. MODEL 379 (1) 33 (8) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) 379 (1) 33 (8) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) 227 (6) 379 (1) 227 (6) 379 (1) 151 (4) 33 (8) 151 (4) 33 (8) 76 (2) 227 (6) 76 (2) 227 (6) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 151 (4) 76 (2) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 151 (4) 76 (2) 271,2 (24) 89,5 (12) Torque Nm (lb.in) 226, (2) 18,8 (16) 135,6 (12) 9,4 (8) 45,2 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 14,9 (2) 226, (2) 18,8 (16) 135,6 (12) 9,4 (8) 45,2 (4) 175 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) (5 PSI) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 14,9 (2) (14) 454 (12) 379 (1) 33 (8) 227 (6) 151 (4) 76 (2) 316,4 (28) 271,2 (24) 115LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 175 BAR (25 PSI) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) SPEED r/min 53 (14) 454 (12) 379 (1) 33 (8) 227 (6) 151 (4) 76 (2) 14,4 (14) 89,5 (12) 226, (2) 18,8 (16) 135,6 (12) 9,4 (8) 45,2 (4) 14 BAR (2 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 14,9 (2)
9 Typical Performance 45M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 38 C (1 F) 568 (15) 53 (14) 492 (13) 13 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 568 (15) 681 (18) 644 (17) 66 (16) 155 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 681 (18) 454 (12) 53 (14) 568 (15) 644 (17) 416 (11) 492 (13) 53 (14) 66 (16) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) 189 (5) 151 (4) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) o 416 (11) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) 492 (13) 454 (12) o 416 (11) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 568 (15) 53 (14) 492 (13) 454 (12) 416 (11) 379 (1) 341 (9) 33 (8) 114 (3) 189 (5) 189 (5) 265 (7) 76 (2) 151 (4) 151 (4) 227 (6) 38 (1) 114 (3) 114 (3) 189 (5) 76 (2) 76 (2) 151 (4) 119,3 (16) 38 (1) 38 (1) 114 (3) 339, (3) 271,2 (24) 23,4 (18) 135,6 (12) 67,8 (6) 14,4 (14) 89,5 (12) 172 BAR (25 PSI) 74,6 (1) 138 BAR (2 PSI) 59,7 (8) 44,7 (6) 69 BAR (1 PSI) 29,8 (4) 34 BAR (5 PSI) 14,9 (2) SPEED RPM 474,5 (42) 46,7 (36) 339, (3) 271,2 (24) 23,4 (18) 135,6 (12) 67,8 (6) 134,2 (18) 119,3 (16) 14,4 (14) 89,5 (12) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 14,9 (2) 172 BAR (25 PSI) 34 BAR (5 PSI) 138 BAR (2 PSI) 69 BAR (1 PSI) 76 (2) 38 (1) SPEED r/min FluiDyne Fluid Power 9
10 Typical Performance 45M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 38 C (1 F) 795 (21) 757 (2) 719 (19) 681 (18) 644 (17) 66 (16) 568 (15) 53 (14) 492 (13) 454 (12) 416 (11) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) 189 (5) 151 (4) 114 (3) 76 (2) 38 (1) 164, (22) 149,1 (2) 185 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 795 (21) 757 (2) 719 (19) 681 (18) 644 (17) 66 (16) 568 (15) 53 (14) 492 (13) 454 (12) 416 (11) 379 (1) 341 (9) 33 (8) 265 (7) 227 (6) 189 (5) 151 (4) 114 (3) 76 (2) 38 (1) 134,2 (18) 172 BAR (25 PSI) 542,3 (48) 119,3 (16) Torque Nm (lb.in) 474,5 (42) 46,7 (36) 339, (3) 271,2 (24) 23,4 (18) 135,6 (12) 14,4 (14) 89,5 (12) 74,6 (1) 59,7 (8) 44,7 (6) 29,8 (4) 34 BAR (5 PSI) 138 BAR (2 PSI) 69 BAR (1 PSI) 67,8 (6) 14,9 (2)
11 Typical Performance 5M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 38 C (1 F) 833(22) 757 (2) 681 (18) 22 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 833 (22) 99 (24) 833 (22) 757 (2) 255 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 99 (24) 66 (16) 757 (2) 681 (18) 833 (22) 53 (14) 681 (18) 66 (16) 757 (2) 454 (12) 66 (16) 53 (14) 681 (18) 379 (1) 53 (14) 454 (12) 66 (16) 33 (8) 454 (12) 379 (1) 53 (14) 227 (6) 151 (4) 76 (2) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 379 (1) 33 (8) 227 (6) 33 (8) 227 (6) 151 (4) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) 379 (1) 33 (8) 151 (4) 76 (2) 227 (6) 76 (2) 151 (4) 76 (2) 677,9 (6) 179, (24) 79,9 (7) 564,9 (5) 172 BAR (25 PSI) 149,1 (2) 677,9 (6) 172 BAR (25 PSI) 179, (24) 451,9 (4) 339, (3) 226, (2) 113, (1) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) ,3 (16) 89,5 (12) 59,7 (8) 29,8 (4) 564,9 (5) 451,9 (4) 339, (3) 226, (2) 113, (1) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 149,1 (2) 119,3 (16) 89,5 (12) 59,7 (8) 29,8 (4) SPEED r/min FluiDyne Fluid Power 11
12 Typical Performance 5M Motors Performance Constants: Oil SAE 1W, viscosity 32 cst (15 38 C (1 F) 16(28) 984 (26) 99 (24) 3 LB. IN. MODEL (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 16 (28) 833 (22) 984 (26) 757 (2) 99 (24) 681 (18) 833 (22) 66 (16) 757 (2) 53 (14) 681 (18) 454 (12) 66 (16) 379 (1) 53 (14) 33 (8) 227 (6) 151 (4) (5 PSI) 7 BAR (1 PSI) 14 BAR (2 PSI) 175 BAR (25 PSI) 454 (12) 379 (1) 33 (8) 76 (2) 227 (6) 151 (4) 76 (2) 93,9 (8) 79,9 (7) 677,9 (6) 564,9 (5) 451,9 (4) 339, (3) 226, (2) 113, (1) 172 BAR (25 PSI) 14 BAR (2 PSI) 7 BAR (1 PSI) (5 PSI) 28,8 (28) 179, (24) 149,1 (2) 119,3 (16) 89,5 (12) 59,7 (8) 29,8 (4) Groesbeck Highway Fraser, Michigan 4826 PH: FAX: sales@fluidynefp.com FluiDyne Contact Info and Website 1/215
V10 & V20 Single Vane Pump
ENGINEERING DATA V10 & V20 Single Vane Pump Versatile Reliable High Performance Low Cost w w w. F l u i D y n e F P. c o m E m a i l : c s @ F l u i D y n e F P. c o m V10 & V20 Single Vane Pump Versatile
More informationV 20 F - 1 P 13 S - 1 A 8H 22 L. Std. cover. 1/2 NPT thd. (V10 only) 3/4 NPT thd. (V20 only) 3/4-16 St. thd. (V10F & V20F) 3/4 16. St. thd.
Model Codes V 2 F - 1 P 13 S - 1 8H 22 L 1 2 3 4 5 6 7 8 9 1 11 12 1 Vane pump 2 Series 1 or 2 3 Integral valve options (Omit if not required) F Flow control & relief P Priority valve & relief 4 Mounting
More informationVickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691
Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................
More informationFIXED DISPLACEMENT VANE PUMPS
FIXED DISPLACEMENT VANE PUMPS Single Vane Pumps Double Vane Pumps Thru-Drive Vane Pumps HS - HQ - VH - SERIES Working pressure: up to 210 bar Displacements: from 3 cc to 200 cc Pumps, cartridges and spare
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationPVE 19 & 21 Piston Pumps
Engineering PVE 19 & 21 Piston Pumps Pressures to 3500 psi For Mobile and Industrial Use Same Day Shipments Rated for 2400 rpm > Speeds to 2400 rpm www.fluidynefp.com Table of Contents Introduction...2
More informationVHO Vane Pumps ENGINEERING DATA. Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance
ENGINEERING DATA VHO Vane Pumps Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance www.fluidynefp.com Table of Contents Performance Data...2 Model
More informationVickers. Vane Pumps. Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment.
Vickers Vane Pumps Single and Double Vane Pumps Model Series V10, V20, V2010, and V2020 for Industrial Equipment Revised 1/95 698 Introduction Series V10, V20, V2010, and V2020 fixed displacement pumps
More informationHigh Pressure Single Vane Pump T6C/T6D Series
High ingle Vane Pump T6C/T6D eries Features T6C and T6D eries are fixed displacement and balanced type single vane pumps. The pump is designed for higher operating pressure and greater flow at the same
More informationIFP VTM42 POWER STEERING PUMPS
IFP VTM42 POWER STEERING PUMPS * Compact Power Source for Steering Assemblies * Integral Relief and Flow Control * High Efficiency * Balanced Cartridge Design * Quiet Operation IFP Power Steering Pump
More informationVickers. Vane Pumps. V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications.
Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications Revised 6/95 560 Introduction Vickers offers the most complete line of hydraulic intravane
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationDouble Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
More informationVane Pumps & Parts V10/V10F/NF/P V20/V20F/NF/P V2010*, V2020*F/NF/P
Vane Pumps & Parts V10/V10F/NF/P V20/V20F/NF/P V2010*, V2020*F/NF/P Standards and Specials - including Caterpillar Pumps Available in Industrial Version, Single & Double Units Left and Right Hand Rotations,
More informationPowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
More informationVickers 45. VMQ Series 30 Vane Pumps. Fixed Displacement, For Industrial and Mobile Applications (4.188)
[ (4.188) 49,4 (1.94) /21,8 /.86) 174,7/172,3 (6.88/6.78) 332,9/33,5 (13.11/13.1) "M" is marked if metric port threads No marking if inch port threads AS-568-152 O-ring Vickers 45 65,3 (2.57) 13 (5.1 VMQ
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationVT67DB Double vane pump
ervice Information 4-000 Double vane pump. 0 9 0q 9q 4 5 6 8 Mounting torque Item pos. N-m 68 8 ft-lbs 50 8 8b 8a 8d 8c ITEM 0q INCLUDED 0d 0h 0g 0f haft Code - 0e 0c 0b 0a haft Code - haft Code - haft
More informationMOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationPVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
More informationVane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi)
Vickers Vane Pumps VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) 5008.00/EN/0596/A A.25 Introduction From the
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 145-146 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WD WD (All Series) whitedriveproducts overview The WD motor series is an economical solution for light duty
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationVT6ED - VT6EDM - VT6EDP Double vane pump
ervice Information 4-0007 - M - P Double vane pump. 3 4 Bold printed are recommended repair kits and assemblies 0r 0 9 9r 6 Mounting torque Item pos. 4 5 ft-lbs 38 38 N-m 87 87 7 7 8 b P 8b 8a 8d 5 0g
More informationHPV-10 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT
More informationHPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES
BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationENGINEERING DATA. Variable Axial Piston Pump A10V Series - 52/53. w w w. F l u i D y n e F P. c o m E m a i l : F l u i D y n e F P.
ENGINEERING DATA Variable Axial Piston Pump A10V eries - 52/53 eries 52/53 - Open Circuit Peak Pressure 315 bar (4,600 psi) Nominal Pressure 250 bar (3,600 psi) izes 10cm 3 /rev - 63cm 3 /rev (0.64in 3
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More informationAXIAL PISTON PUMPS AND MOTORS
HPV-HMF SERIES SECTIONA VIEW AXIA PISTON VARIABE DISPACEMENT PUMP AXIA PISTON FIXED DISPACEMENT MOTOR Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output
More informationV* THRU DRIVE SINGLE VANE PUMPS ORDERING CODE
V* ORDERING CODE 1 - "F3" means special seals for fire-resistant fluids. Omit if not required 2 - Pump Type: F3 VS 7T C 60 D 86 A A 1 2 3 4 5 6 7 8 9 VS = 12 vane pump, industrial use (very quiet), UNC
More informationHPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationVane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
More informationVickers. Service Data. Vane Pumps. Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * I-3154-S. Rev. 2/98
Service Data Vickers Vane Pumps Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * Rev. 2/98 I-3154-S MODEL VTA VTB VTBP ADAPTER ADAPTER PLATE KIT 584936 941296 584922 941297 FOR BP MODELS AN ADAPTER
More informationMedium Duty Piston Pump Variable Displacement Closed Circuit
Medium Duty Piston Pump Variable Displacement Closed Circuit Model 70160 Model 70360 Model 72400 20.3 cm 3 /r [1.24 in 3 /r] 40.6 cm 3 /r [2.48 in 3 /r] 40.6 cm 3 /r [2.48 in 3 /r] 23.6 cm 3 /r [1.44 in
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationWhisper Pumps VPV Vane Pumps
Whisper Pumps VPV Vane Pumps Contents Whisper Vane Pump Catalog 3 Contents Introduction 4 Benefits 4 Specifications 5 Ordering details 8 Performance characteristics 12 VPV 16 to PSI (21 Bar) 12 VPV 25
More informationMINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationEaton Vickers 25M 35M 45M 50M Vane Motor And heavy duty bearing 26M, 36M, 46M, 51M Vickers hydraulic vane motor
Eaton Vickers 25M 35M 45M 50M Vane Motor And heavy duty bearing 26M, 36M, 46M, 51M Vickers hydraulic vane motor General information Vickers high performance vane motors, when properly installed in a hydraulic
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
SERIES 0-1 - LIHT DUTY Hydraulic Motor RS RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech.
More informationwhite drive products SERIES HYDRAULIC MOTORS
white drive products WR SERIES HYDRULIC MOTORS WR overview The WR Series motor incorporates the latest advances for smooth performance, efficiency and durability. It features an optimized Roller Stator
More informationGear Pumps and Motors Technical Catalog. Series 26 Pumps Series 26 Motors Series L2 Pumps
Gear Pumps and Motors Technical Catalog Series 26 Pumps Series 26 Motors Series L2 Pumps Table of Contents Series 26 Pumps Features...5 General Specifications and Performance Data...7 Performance Data
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationPiston Pumps PVH Variable Displacement
Piston Pumps PVH Variable Displacement Model Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 Piston pump, variable displacement 2 Maximum geometric displacement 057 57.4 cm3/r [3.50 in3/r] 063 63.1 cm3/r [3.85
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationSINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET
SINGLE VANE PUMPS BH*, V* and DT/7 single vane pumps BH* SINGLE VANE PUMPS BH*SINGLE VANE PUMP ORDERING CODE F BHQ 7 D 1 A 1 7 1- F means special seals for fire-resistant fluids. Omit if not required.
More informationVIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Yes Yes Yes Yes Yes Yes Standard Yes Yes Yes Yes Yes Yes P.t.o. Yes Yes
More informationTechnical Information Series 45 H Frame powersolutions.danfoss.com
MAKING MODERN LIVING POILE Technical Information eries 45 H Frame powersolutions.danfoss.com Contents Frame H Design... 4 pecifications... 5 Performance H57... 6 Performance H75D... 7 Order code... 8 Controls...
More informationBent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
More informationW1500 SERIES HYDRAULIC PUMP
W1500 SERIES HYDRAULIC PUMP Concentric AB Innovation in Hydraulics PRESSURE (P1) 276 BAR (4000 PSI) (P2) 300 BAR (4400 PSI) SPEED 3300 RPM Min. 500 RPM at 4000 PSI (276 BAR) Continuous EFFICIENCY Overall
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationMJ SERIES LOW SPEED HIGH TORQUE MOTORS
MJ SERIES LOW SPEED HIGH TORQUE MOTORS HIGH EFFICIENCY TORQUE MOTORS The MJ Series Low Speed High Torque Motor is available in 10 displacement sizes. The MJ Series motor is constructed using heavy-duty
More informationPumps & Motors GRESEN INDEX
Pumps & Motors GRESEN INDEX Series Overview......................156-157 Pump and Motor Displacement Chart...158-159 General Product and Safety Information.....160 Torque Requirements & Overhang Data......161
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (E2) 4 Bolt Square (E4)
Gerolor Motors BMRS Series Size CC-A Flange Options-B Shaft Options-C Ports Features 100 100 1 1 1 1 200 200 2 3 2 3 3 3 SAE A 2 Bolt - (E2) 4 Bolt Square (E4) 1-1/4" Keyed (G) 32mm Keyed (B) 1-1/4' 14T
More informationVariable Displacement Piston Pumps for Industrial Applications
Vickers Piston Pumps Variable Displacement Piston Pumps for Industrial Applications PVQ2 Family 21,1 to 141 cm 3 /r (1.29 to 8.64 in 3 /r) Displacements 23 bar (33 psi) Max. Pressure 514./EN/598/A Introduction
More informationVickers. Service Data. Vane Pumps. High Pressure, High Performance Double Vane Pump. 4525VPF Series -21 Design /EN/0396/S
Service Data Vickers Vane Pumps High Pressure, High Performance Double Vane Pump 4525VPF Series -21 Design 5009.10/EN/0396/S To reverse Cartridge rotation remove Retaining Ring and Bearing Carrier S/A.
More informationHigh Pressure, High Performance Double Vane Pumps Parts Data VMQ24535S Series 32 Design
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24535S Series 32 Design High Pressure, High Performance Double Vane Pump VMQ24535S Series 32 Design Note: Lubricate all parts and seals with
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationD SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationBML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationHydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
More informationHYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
More informationIndustrial Hydraulic Pumps T7E, T7ES. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7E, T7E Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you moving!
More informationTechnical Information Series 45 G Frame powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Series 45 G Frame powersolutions.danfoss.com Contents Frame G Design... 4 Specifications... 5 Performance G74B... 6 Performance G9C... 7 Order code...
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationP.O. Box 1388 West Sacramento, CA (916) Fax: (916)
P.O. Box 1388 West Sacramento, CA 95691 (916) 372-5411 Fax: (916) 373-0952 www.hecogear.com Model 16 Installation Dimensions 30,000 in lbs Continuous Torque Output 5.2 to 1 Ratio 20,000 lb. Maximum Radial
More informationCatalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 4000 Compact Series Standard, Wheel, and Bearingless Hydraulic Motors We Manufacture 11-01-113 EN-0400 Solutions
More informationIFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements
More information7/8-14 SAE 1/2" NPT 1/2" BSP Flange Mount BMG 98 BMG 61 BMG 76
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationSERIES HYDRAULIC MOTORS
D9 SERIES HYDRAULIC MOTORS D9 overview The D9 Series of motor is the largest member of the White Drive Product s family. The product is capable of producing torque values comparable to competitive motors,
More informationGear Pumps and Motors
Gear Pumps and Motors Technical Catalog s Series 26 Motors Series L2 Pumps Table of Contents s Features...3 General Specifications and Performance Data...4 Performance Data Charts...5 Standard Catalog
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Variable Displacement Piston Pump.
H y d r a u l i c s ydraulics Eaton h y d r a u l i c s Variable Displacement Piston Pump Manual Controlled Servo Controlled We Manufacture Model 70160 20, cm /r [1.24 in /r] 2,6 cm /r [1.44 in /r] Model
More informationMedium Duty Piston Pump Variable Displacement Piston Pump
Medium Duty Piston Pump Variable Displacement Piston Pump Model 70160 Model 70360 Model 72400 20,3 cm 3 /r [1.24 in 3 /r] 40,6 cm 3 /r [2.48 in 3 /r] 40,6 cm 3 /r [2.48 in 3 /r] 23,6 cm 3 /r [1.44 in 3
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationEaton. Revised June, Heavy Duty Hydrostatic Transmissions. l r. Models 33 through 76 Hydrostatic Transmissions. We Manufacture.
s Eaton Revised June, 1997 c Heavy Duty Hydrostatic Transmissions h i y d l ydraulics r a u u l c a i r s y d Models 33 through 76 Hydrostatic Transmissions We Manufacture Solutions H S o l u t i o n s
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMC 045. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMC 045 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More informationGM25 Motor Dimensional Information
GM25 Series Birotational Hydraulic Motors GM25 Series hydraulic motors are designed for low noise, high efficiency birotational operation. Cast iron construction insures reliability and strength. A number
More informationHigh Pressure, High Performance Double Vane Pumps Parts Data VMQ24525S Series 32 Design
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24525S Series 32 Design High Pressure, High Performance Double Vane Pump VMQ24525S Series 32 Design Note: Lubricate all parts and seals with
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted
More information