VT6ED - VT6EDM - VT6EDP Double vane pump
|
|
|
- Russell Baldwin
- 5 years ago
- Views:
Transcription
1 ervice Information M - P Double vane pump.
2 3 4 Bold printed are recommended repair kits and assemblies 0r 0 9 9r 6 Mounting torque Item pos. 4 5 ft-lbs N-m b P 8b 8a 8d 5 0g 0f 0e 0d 0c 0b 0a 9a 9b 9c 9d 9e 9f ITEM 0r ITEM 9r INCLUDED INCLUDED 9g 8c haft Code - 0q 9p haft Code - haft Code - 3 0p 0h 0j 0k 0m 0n 9m 9n 9k 9j 9h haft Code - 4 haft Code - T
3 Item pos. Description Housing (UNC) Housing (Metric) Mounting flange (UNC) Mounting flange (Metric) Mounting flange (UNC) (P) Mounting flange (Metric) (P) 3 End cap (UNC) End cap (Metric) 4 Mounting crew 5 Mounting crew 6 Retaining ring 7 haft seal (-0.7 bar) haft seal (4-5-7 bar) haft seal (-0.7 bar) (P) (tandard) V C V C V C V V V V V Part No. M/ (Bi-dir plates) P (only for P) -0**-B** V C V C V C V V V V V V C V C V C V C V V V V V V Qty haft and bearing ass'y (#) haft and bearing ass'y (#) haft and bearing ass'y (#3) haft and bearing ass'y (#4) haft and bearing ass'y (#T) haft and bearing ass'y (#3) (P) V4-88 V4-494 V4-880 V4-88 V4-88 V4-494 V4-880 V4-88 V4-88 V4-494 V4-880 V4-88 V V a haft (Keyed) (Code-) haft (Keyed) (Code-) haft (plined) (Code-3) haft (splined) (Code-4) haft (plined) (Code-T) haft (plined) (Code-3) (P) V V V V V V V V V V V V V V b 8c 8d Round section ring Ball bearing Key (Code -) Key (Code -) V V V V V V V V V V V V Cartridge assembly 04 C.W. (P) Cartridge assembly 04 C.C.W. (P) Cartridge assembly 045 C.W. (P) Cartridge assembly 045 C.C.W. (P) Cartridge assembly 050 C.W. (P) Cartridge assembly 050 C.C.W. (P) Cartridge assembly 05 C.W. (P) Cartridge assembly 05 C.C.W. (P) Cartridge assembly 06 C.W. (P) Cartridge assembly 06 C.C.W. (P) Cartridge assembly 066 C.W. (P) Cartridge assembly 066 C.C.W. (P) Cartridge assembly 07 C.W. (P) Cartridge assembly 07 C.C.W. (P) Cartridge assembly 085 C.W. (P) Cartridge assembly 085 C.C.W. (P) V V V4-005 V4-006 V V V4-007 V4-008 V4-009 V4-00 V4-0 V4-0 V V V V V V V4-005 V4-006 V V V4-007 V4-008 V4-009 V4-00 V4-0 V4-0 V V V V C C V V V V V V V V V V V V C C a Port plate - rear C.W. Port plate - rear C.C.W. V V V V V V b 9c 9d Pin vane holdout Vane Cam ring - 04 Cam ring Cam ring Cam ring - 05 Cam ring - 06 V V V V V V V V V V V V V V V V V V V V V
4 Item pos. Cam ring Cam ring - 07 Cam ring Description (tandard) V V Part No. (Bi-dir plates) (only for P) V V M/ P -0**-B** V V Qty 9e 9f 9g Back-up ring Port plate - pressure C.W. Port plate - pressure C.C.W. V34-06 V V V V34-06 V V V V34-06 V V V h 9j 9k 9m 9n 9p 9r q. section seal q. section seal Rotor-insert ass'y crew Lockwasher internal tooth q. section seal V V V4-085 V V V V V V V4-085 V V V V V V V V V V V Cartridge assembly *4 C.W. (P) Cartridge assembly *4 C.C.W. (P) Cartridge assembly *0 C.W. (P) Cartridge assembly *0 C.C.W. (P) Cartridge assembly *4 C.W. (P) Cartridge assembly *4 C.C.W. (P) Cartridge assembly *8 C.W. (P) Cartridge assembly *8 C.C.W. (P) Cartridge assembly *3 C.W. (P) Cartridge assembly *3 C.C.W. (P) Cartridge assembly *35 C.W. (P) Cartridge assembly *35 C.C.W. (P) Cartridge assembly *38 C.W. (P) Cartridge assembly *38 C.C.W. (P) Cartridge assembly *4 C.W. (P) Cartridge assembly *4 C.C.W. (P) Cartridge assembly *45 C.W. (P) Cartridge assembly *45 C.C.W. (P) Cartridge assembly *50 C.W. (P) Cartridge assembly *50 C.C.W. (P) V V V4-649 V V V V4-086 V4-086 V V V V V V V V V4-087 V4-087 V V C C C C C C V4-00 V4-0 V4-0 V4-03 V4-04 V4-05 V4-06 V4-07 V4-08 V4-09 V4-030 V4-03 C C V V V V V V V V V V V V V V V V V V V V a Port plate - rear C.W. Port plate - rear C.C.W. Port plate - rear Bi-dir V V V V b Pin vane holdout 0c Vane 0d Cam ring - 04 Cam ring - 00 Cam ring - 04 Cam ring - 08 Cam ring - 03 Cam ring Cam ring Cam ring - 04 Cam ring Cam ring V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V e 0f Back-up ring V34-6 V34-6 V V V34-6 V68-507
5 Item pos. Description 0g Port plate - pressure C.W. Port plate - pressure C.C.W. Port plate - pressure (tandard) V V Part No. (Bi-dir plates) (only for P) V M P -0**-B** V Qty 0h 0j 0k 0m 0n 0q 0p 0r q. section seal q. section seal Rotor-insert ass'y crew Lockwasher internal tooth Bush q. section seal V69-03 V69-03 V V V4-0 V V V V V V4-0 V V V V V V69-03 V V V V V V V eal kit ( - 0,7 bar) 9f,9h eal kit (4-7 bar) 9j,9r 0f,0h eal kit (5-7 bar) 0j,0r eal kit ( - 0,7 bar) (P) V4-09 V V V4-09 V V4-095 V4-09 V V V a Port plate - rear ass'y C.W. (P) Port plate - rear ass'y C.C.W. (P) V4-04 V4-05 V4-04 V4-05 V4-04 V4-05 0a Port plate - rear and bush ass'y C.W. (P) 0p Port plate - rear and bush ass'y C.C.W. (P) Port plate - rear and bush ass'y Bi-dir (P) V V V4-06 V4-06 * 0 - tandard B - Bi-directional plates/mobile ( only for 'D' cartridge ) R - Mobile-pring assisted (on request) tommgap To change porting position, follow the steps below:. ecure pump and remove 4 bolts from mounting flange. Move the mounting flange to mm away from housing. Insert one bolt halfway to mounting flange. Install a wrench between the shaft and bolt and turn in the desired way, so that the required position of P port with respect to uction is obtained. Reinstall the bolts and tighten to corresponding mounting torque as provided on page.. Follow similar procedure for changing P position. Use wrench between two bolts placed diagonally opposite. Instruction: Do not remove mounting flange/end cap completely from the housing but only just to mm to avoid the cartridge pin to move out from the housing dowel pin hole. Make sure no piece of paint enters into the gap to avoid leakage. If it is difficult to turn mounting flange/end cap put some hydraulic oil into the pressure port to lubricate the pressure port seals. wrench
6 MODEL CODE eries * M Mobile * P Mobile with double shaft seal ( omit for Industrial ) Y Metric port connection, omit for UNC * * * - * 66 - * 35 - R 00 - C - * P P Modification eal class - BUNA N EPDM VITON 04/R ( 3.30 ) 045/R ( 4.40 ) 050/R ( ) 05/R ( ) elect 'R ' for Mobile-spring assisted ** in /rev (cm / rev) in /rev (cm /rev) 06/R6.00 ( ) 066/R ( 3.30 ) 07/R ( 7.0 ) 085/R ( ) Design letter B Industrial C Mobile Porting combination : (00 tandard) 00 P - P 0 P - P 0 -P-P 03 P - P In /rev (cm /rev) 04/B4/R4 00/B0/R0 04/B4/R4 08/B8/R8 03/B3/R3 035/B35/R ( ) ( ) ( ) ( ) ( ) (.00) in /rev (cm /rev) 038/B38/R38 04/B4/R4 045/B45/R45 050/B50/R ( 0.30 ) ( ) ( ) ( ) 04 P 08 -P P P 05 P -P 09 -P P 06 P 0 P P 07 -P P P elect 'B ' for Mobile and Bi-directional ** elect 'R ' for Mobile-spring assisted ** Type of haft Type of haft Type of haft P P P P P P P P P Keyed (AE -CC) Keyed (no AE) 3 plined (AE -C) 4 plined (AE-CC) M Keyed (AE -CC) Keyed (no AE) 3 plined (AE -C) 4 plined (no AE) T plined ( AE J78c) P 3 plined ( no AE) Direction of rotation R Clockwise L Counter - clockwise P P - Pressure - uction Veljan Hydrair Private Limited,Balanagar, Hyderabad , INDIA. Phone : ,95 Fax : , C All Rights Reserved Product details are liable to change without prior notice Print Replace Revision Printed in India VHPL/7//k
VT67DB Double vane pump
ervice Information 4-000 Double vane pump. 0 9 0q 9q 4 5 6 8 Mounting torque Item pos. N-m 68 8 ft-lbs 50 8 8b 8a 8d 8c ITEM 0q INCLUDED 0d 0h 0g 0f haft Code - 0e 0c 0b 0a haft Code - haft Code - haft
High Pressure Single Vane Pump T6C/T6D Series
High ingle Vane Pump T6C/T6D eries Features T6C and T6D eries are fixed displacement and balanced type single vane pumps. The pump is designed for higher operating pressure and greater flow at the same
DT6 TRIPLE VANE PUMPS DT6 TRIPLE VANE PUMPS ORDERING CODE DATA SHEET. 84 tdz.com bezares.com. Seal Class. Design letter
DT6 TRIPLE VANE PUMP DT6 TRIPLE VANE PUMP ORDERING CODE DATA HEET DT6-DCC-B- I 6/38/70-1-R-00-B-1-00 pecial threads(ask for available threads) UNC: 00, 01 Metric: M0, M1 eal Class Design letter 1:NBR 5:VITON
Industrial Hydraulic Pumps T7E, T7ES. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7E, T7E Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you moving!
Hydraulic Pumps T7 for variable speed drives
FC Hydraulic Pumps T7 for variable speed drives Denison Vane Technology Catalogue HY29-11/UK Content General Information Introduction and product key features 3 Main Technical Data Main table for single
ORDERING CODE - SERIES DT DT6 DOUBLE VANE PUMPS ORDERING CODE DATA SHEET. 72 tdz.com bezares.com DT6* I - CC - * - B -17/14-1- R-00 -B- 1-00
ORDERING CODE - ERIE DT DT6 DOUBLE VANE PUMP ORDERING CODE DATA HEET DT6* I - CC - * - B -17/14-1- R-00 -B- 1-00 pecial threads (ask for available threads) UNC: 00, 01, 10, 11 Metric: 0M, W0, 1M, W1 eal
High Speed, High Pressure Vane Motors
ENGINEERING DATA High Speed, High Pressure Vane Motors M - Motors 25M, 35M, 45M, 5M w w w. F l u i D y n e F P. c o m E m a i l : c s @ F l u i D y n e F P. c o m Dependable Versatile The M Motor is a
HPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
Veljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
Gear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
![Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]](/thumbs/76/74105930.jpg "Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]")
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
Vickers. Service Data. Vane Pumps. High Pressure, High Performance Double Vane Pump. 4525VPF Series -21 Design /EN/0396/S
Service Data Vickers Vane Pumps High Pressure, High Performance Double Vane Pump 4525VPF Series -21 Design 5009.10/EN/0396/S To reverse Cartridge rotation remove Retaining Ring and Bearing Carrier S/A.
Veljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
Vickers. Service Data. Vane Pumps. Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * I-3154-S. Rev. 2/98
Service Data Vickers Vane Pumps Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * Rev. 2/98 I-3154-S MODEL VTA VTB VTBP ADAPTER ADAPTER PLATE KIT 584936 941296 584922 941297 FOR BP MODELS AN ADAPTER
Vane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
Variable Axial Piston Pump A10V Series - 52/53
Variable Axial Piston Pump A10V eries - 52/53 eries 52/53 - Open Circuit Peak Pressure 315 bar (4,600 psi) Nominal Pressure 250 bar (3,600 psi) izes 10cm 3 /rev - 63cm 3 /rev (0.64in 3 /rev-3.8in 3 /rev)
M03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
ENGINEERING DATA. Variable Axial Piston Pump A10V Series - 52/53. w w w. F l u i D y n e F P. c o m E m a i l : F l u i D y n e F P.
ENGINEERING DATA Variable Axial Piston Pump A10V eries - 52/53 eries 52/53 - Open Circuit Peak Pressure 315 bar (4,600 psi) Nominal Pressure 250 bar (3,600 psi) izes 10cm 3 /rev - 63cm 3 /rev (0.64in 3
3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353)
3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353) Single 35VQH Double 3525VQH Thru-Drive 35VQHT*S Single and Thru- Drive Pumps VQH Series fixed displacement single and
Hydraulic Pump T7AS/T7ASW Series Vane Pumps
Hydraulic ump T7A/T7AW eries Vane umps ressure up to 3 bar Fixed Displacement from 6 to 4 ml/rev. Catalogue HY29-8/UK April 26 Catalogue HY29-8/UK General Characteristics General T7A T7AW Vane umps T7A
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24525S Series 32 Design
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24525S Series 32 Design High Pressure, High Performance Double Vane Pump VMQ24525S Series 32 Design Note: Lubricate all parts and seals with
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24535S Series 32 Design
High Pressure, High Performance Double Vane Pumps Parts Data VMQ24535S Series 32 Design High Pressure, High Performance Double Vane Pump VMQ24535S Series 32 Design Note: Lubricate all parts and seals with
vane pumps Vane Pumps Prices Shaft and Cartridge Prices
Vane Pumps vane pumps Vane Pumps Prices Shaft and Cartridge Prices Seal Kit Prices Single Pump Dimensions Single Pump Model Code Vane Pumps Technical Info Double Pump Ordering Code Double Pump Dimensions
SERIES HYDRAULIC MOTORS
ERIE HYDRULIC MOTOR overview The eries motor is the leader in its class, offering high efficiency and durability. The three-zone orbiting valve, laminated manifold and Roller tator motor work harmoniously
Axial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
Pneumatic Circular Saw. Type Illustration can differ from the original. Spare Parts List
Pneumatic Circular Saw Type Illustration can differ from the original Cleaning Regular cleaning is required for a continuous and proper operation. Clean the housing regularly with a soft cloth, it is important
EN-0800 (Replaces ) Eaton. Medium Duty Piston Pump. Parts Information. Model Servo Controlled Piston Pump v-04
Eaton Medium Duty Piston Pump 06-06-642 EN-0800 (Replaces 06-642) Parts Information Model 72400 Servo Controlled Piston Pump v-04 Parts Drawing Pump drawn below is typical of a righthand rotation with
Vane motors Single & double M3B - M4 / M4S series
Vane motors Single & double M3B - M4 / M4S series Publ. 2 - AM 157 - B 07 / 97 / FB Replaces : 2 - AM 157 - A CONTENTS - M3* AND M4* SERIES GENERAL General characteristics... 3 Technical data... 4 General
Gear Pump Division. Coding
Gear Pump Division Coding October 28, 2014 Commercial Roller Bearing Gear Pumps Major Components PGP050B278BYOL20-98DAF12-1 1 3 1 2 3 4 5 6 7 2 5 6 1) Shaft End Cover 2) Port End Cover 3) Gear Housing
MOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
Fixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
Axial Piston Variable Pump A1VO Series 10
Features Axial Piston Variable Pump A1VO eries 10 Variable pump in axial piston swashplate design for hydrostatic drives in an open circuit The flow is proportional to the drive speed and displacement.
Axial piston fixed pump AA2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial piston fixed pump AA2FO RA-A 91401/07.2014 1/32 Replaces: 03.08 Data sheet eries 6 izes Nominal pressure/maximum
FIXED DISPLACEMENT VANE PUMPS
FIXED DISPLACEMENT VANE PUMPS Single Vane Pumps Double Vane Pumps Thru-Drive Vane Pumps HS - HQ - VH - SERIES Working pressure: up to 210 bar Displacements: from 3 cc to 200 cc Pumps, cartridges and spare
Internal Gear Pumps. Series QX. Reference: 100-P E-10 1/32. Issue:
Internal Gear Pumps eries QX Reference: -P-000021-E-10 Issue: 11.2011 1/32 2/32 Contents Page 1 General... 5 1.1 Product description... 5 1.2 Advantages... 5 2 Technical data... 5 2.1 General (deviating
PAVC SERIES VARIABLE VOLUME PISTON PUMP
PM 340-04 Hydraulics Service Parts Guide Effective: October, 994 PAVC SERIES VARIABLE VOLUME PISTON PUMP Model PAVC 00 * * * * 3 34 4 9 3 4 5 6 3 4 7 4 0 FT.-LB. 8 39 SHAFT ASS Y (INCLUDES ITEM ) 40 (INCLUDES
Technical Information Series 45 H Frame powersolutions.danfoss.com
MAKING MODERN LIVING POILE Technical Information eries 45 H Frame powersolutions.danfoss.com Contents Frame H Design... 4 pecifications... 5 Performance H57... 6 Performance H75D... 7 Order code... 8 Controls...
Industrial Hydraulic Pumps T7DBB, T7DBBS. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7DBB, T7DBBS Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you
IFP VTM42 POWER STEERING PUMPS
IFP VTM42 POWER STEERING PUMPS * Compact Power Source for Steering Assemblies * Integral Relief and Flow Control * High Efficiency * Balanced Cartridge Design * Quiet Operation IFP Power Steering Pump
Mobile Hydraulic Pumps T6EM, T6EP. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6EM, T6EP Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
Axial piston variable pump A1VO Series 10
Axial piston variable pump A1VO eries 10 RE 92650 Edition: 06.2016 Replaces: 08.2015 For load-sensing-systems in smaller working machines izes 18, 28, 35 Nominal pressure 250 bar Maximum pressure 280 bar
Vickers 45. VMQ Series 30 Vane Pumps. Fixed Displacement, For Industrial and Mobile Applications (4.188)
[ (4.188) 49,4 (1.94) /21,8 /.86) 174,7/172,3 (6.88/6.78) 332,9/33,5 (13.11/13.1) "M" is marked if metric port threads No marking if inch port threads AS-568-152 O-ring Vickers 45 65,3 (2.57) 13 (5.1 VMQ
Vane motors Single & double zm21 M3B - M4 / M4S series
Vane motors Single & double zm21 M3B - M4 / M4S series Publ. 2 - AM 157 - B 07 / 97 / FB Replaces : 2 - AM 157 - A CHARACTERISTICS - M3* AND M4* SERIES HIGH STARTING TORQUE EFFICIENCY HIGH VOLUMETRIC EFFICIENCY
Axial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 07.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
GM 6-Cylinder Cam Tool Set 3.0L and 3.2L Operating Instructions
GM 6-Cylinder Cam Tool Set 3.0L and 3.2L Operating Instructions Set Includes: Locking Tool... 536594 Locking Tool... 536595 Crankshaft Holding Tool... 536596 Alignment Gauge... 536608 Belt Installation
Belts: 8.1 Page 1. Draper belts & tracking (non windrow)
Belts: 8.1 Page 1. Draper belts & tracking (non windrow) Key Part No. Description Qty Remarks Page No. Revision 1 118-52101-06 Outer draper belt (21' CTF) N.B 2 118-52102-06 Outer draper belt (21' CTF)
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
1. Axial Piston Pumps
Axial Piston Pumps 1. Axial Piston Pumps Series Model Maximum Operating Pressure Maximum Displacement Remarks Page PSI In 3 /rev PV & PVM & PVR Premier Worldcup Goldcup PV6 4500 0.88 PV10 4500 1.26 PV15
Internal Gear Pump, Fixed Displacement PGF
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies neumatics ervice Internal Gear ump, Fixed Displacement GF RE 023/05.2 /20 Replaces: 04.05 Data Type GF sheet Frame sizes,
SINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET
SINGLE VANE PUMPS BH*, V* and DT/7 single vane pumps BH* SINGLE VANE PUMPS BH*SINGLE VANE PUMP ORDERING CODE F BHQ 7 D 1 A 1 7 1- F means special seals for fire-resistant fluids. Omit if not required.
Axial piston variable pump A1VO series 10
Axial piston variable pump A1VO series 10 RE 92650 Edition: 09.2013 Replaces: 02.2013 izes 18, 35 Nominal pressure 250 bar Maximum pressure 280 bar Open circuit Features Variable axial piston pump of swashplate
Heavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
Double Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
Vickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
STM Series Flanged Characterized Ball Valves
TM eries Flanged Ball Valves are designed to regulate the flow of hot water, chilled water, and % glycol solutions to the demand of a controller in Heating, Ventilating, and Air Conditioning (HVAC) systems.the
Axial Piston Variable Pump A10VSNO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VNO RE 92740/07.10 1/16 Data sheet eries 32 ize 63 Nominal pressure 210 bar
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
Axial Piston Variable Pump A4VTG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A4VTG RE 92013/04.08 1/20 Replaces: RE 92012 Data heet eries 33 izes NG71, 90
Size CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
FKL (25, 75, 150, 205, 250 & 400) Exploded View
3 FKL (5, 75, 50, 05, 50 & 400) Exploded View 3 4 5 6 7 8 9a0 a 3 4 5 6 7 34 35 8 9 0 40 4 4 43 36 37 38 39 44 45 46 65000005 Rev A 4 5 6 Fristam FKL Series Pumps 33 3 7 8 48 47 3 49 9 30 3 b 3 49 33 50
HP3V SERIES SWASH PLATE AXIAL PISTON PUMP
H3V ERIE WAH LATE AXIAL ITON UM QUALITY - ERFORMANCE - EFFICIENCY www.henglihydraulic.com HYDRAULIC COMONENT Contents Techanical data... 1 Type introduction... 2 Regulators introduction... 3 erformance
2-Circuit Axial Piston Fixed Pump A18FDO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice 2-Circuit Axial Piston Fixed Pump A18FDO E 91540/03.10 1/12 eplaces: 06.09 Data sheet eries 10 ize 63,
Axial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 09.2017 Replaces: 02.2017 High-pressure pump for applications in a closed circuit up to 500 bar ize 110 280 Nominal pressure 450 bar Maximum pressure
Axial Piston Variable Pump A10VO
Axial Piston Variable Pump A10VO RE 92705/01.12 1/44 Replaces: 06.09 Data sheet eries 32 izes 71 to 180 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Contents Type code for standard program
Axial Piston Variable Pump A10VSO
Axial Piston Variable Pump A10VO RE 92711/01.12 1/48 Replaces: 06.09 and RE 92707/11.10 Data sheet eries 31 izes 18 to 1 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Contents Type code
Mobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
Axial Piston Variable Pump AA10VG
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics ervice xial Piston Variable Pump 10V 92750-/06.09 1/44 eplaces: 03.09 Data sheet eries 10 ize 18... 63 Nominal
Axial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 02.2017 Replaces: 07.2016 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
Hydraulic Motor Model BMK6
Hydraulic Motor Model BMK6 Crossover to Char-ynn 6000 Series gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller bearings permit
Axial Piston Variable Pump A4VTG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A4VTG RE 92013/06.09 1/24 Replaces: 04.08 Data sheet eries 33 izes NG71, 90
DENISON HYDRAULICS vane pumps - single, double, triple T6 mobile application.
DENISON HYDRAULICS vane pumps - single, double, triple T6 mobile application. Publ. 1 - AM0701 - A 11 / 98 / 2000 / FB Replaces : 1 - AM 075 - A CONTENTS - T6 SERIES MOBILE APPLICATION GENERAL Features...
Axial Piston Variable Pump A10VSO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RE 92714/06.11 1/44 Replaces: 07.10 and RE 92707 Data sheet eries 32 ize
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS
IFP HIGH PERFORMANCE INDUSTRIAL SINGLE INTRA-VANE PUMPS * High Volumetric Efficiency * Maximum 3000 PSI operating pressure * Twelve Vane Design for quite operation * Hydraulic Balanced for external life
Axial piston variable pump A10VSO Series 31
Axial piston variable pump A10VO eries 31 RE 92711 Edition: 10.2016 Replaces: 01.2012 All-purpose medium pressure pump izes 18 to 140 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features
Mobile Hydraulic Pumps T6DCCM. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCCM Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM LPV PUMPS FEATURES AND BENEFITS The LPV line of Variable
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.
D SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
Eaton Vickers VQ Hydraulic Vane Pump V and VQ series of single and double vane pump
Eaton Vickers VQ Hydraulic Vane Pump V and VQ series of single and double vane pump www.hydpump.com Intra-vane Mechanism Features Eaton Vickers V and VQ series are fixed displacement and balanced type
Vane pumps single, double & triple T6 mobile application zp20
Vane pumps single, double & triple T6 mobile application zp20 Publ. 1 - AM0701 - A 11 / 98 / 2000 / FB Replaces : 1 - AM 075 - A FEATURES - T6 SERIES MOBILE APPLICATION GREATER FLOW HIGHER PRESSURE BETTER
Axial piston variable pump A4VG Series 40. Americas. RE-A Edition: Replaces:
Axial piston variable pump A4VG eries 40 Americas RE-A 92004 Edition: 09.2017 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 7250 psi (500 bar) ize 110 280 Nominal pressure
HPV-10 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT
Technical Service Parts Breakdown
Parts Breakdown Group: 4000 J10 6 Diode Notes: Form: SP1013 Refer to SP1013 -DWG for major component drawing. Date: December 1, 2009 Refer to TSB-30 for hardware kit breakdown for File: Alternator Parts
This section contains: Coil Kit Seat E-200 Std Module, E-200 Std Plunger W/Ball Assy E-200 O-rings
7-1 ection 7 1. Introduction To order parts, call the Nordson Customer ervice Center at 800-241-8777 or your local Nordson representative. Use this five-column parts list and the accompanying illustration
HPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT
No December, Eaton. Medium Duty Piston Pump. Parts Information. Model Servo Controlled Piston Pump 03
Eaton Medium Duty Piston Pump No. 6-633 December, 1995 Parts Information Model 72400 Servo Controlled Piston Pump 03 Parts Drawing Pump drawn below is typical of a righthand rotation with porting out the
Mobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators
Eaton. Parts Information
Eaton Medium Duty Piston Pump No. 6-632 August, 1995 Parts Information Model 70142 / 70144, 20.3 cm 3 /r [1.24 in 3 /r] Displacement and 70145, 23.6 cm 3 /r [1.44 in 3 /r] Displacement Variable Displacement
Meter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
Series PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
Internal gear pump, fixed displacement
Internal gear pump, fixed displacement RE 023/04.05 Replaces: 06.02 /24 Type GF Frame sizes, 2 and 3 Component series: 2X (F and 2) 3X (F3) Maximum operating pressure 250 bar Maximum displacement.7 to
Axial Piston Variable Pump A18VLO Series 11
Axial Piston Variable Pump A18VLO eries 11 RE 92280 Issue: 06.2012 Replaces: 06.2009 ize 80 Nominal pressure 350 bar Maximum pressure 400 bar For commercial vehicles Open circuit Features Variable pump
Maintenance Instructions & Parts List
Maintenance Instructions Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When Ordering Spare Parts. General Limit the maximum operational pressure of the Parker M
Axial Piston Fixed Pump A17FNO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A17FNO RE 91510/03.10 1/12 Data sheet eries 10 ize 125 Nominal pressure 250 bar
Axial piston variable pump A10V(S)O Series 31
Axial piston variable pump A10V()O eries 31 RE 92701 Edition: 06.2016 Replaces: 01.2012 ize 18 (A10VO) izes 28 to 1 (A10VO) Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features Variable
Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
PVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
HPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09
BETTIS ACTUATOR & CONTROLS SERVICE INSTRUCTIONS FIELD CONVERSION OF SPRING CARTRIDGE FAIL DIRECTION CLOCKWISE TO COUNTER-CLOCKWISE OR THE INVERSE
BETTIS ACTUATOR & CONTROLS SERVICE INSTRUCTIONS FIELD CONVERSION OF SPRING CARTRIDGE FAIL DIRECTION CLOCKWISE TO COUNTER-CLOCKWISE OR THE INVERSE FOR THE FOLLOWING SERIES T3XX-SRX AND T4XX-SRX SPRING RETURN
CUSTOMER SERVICES: SALES: DENISON LINE (OTHER PARTS NOT LISTED ARE AVAILABLE)
CUSTOMER SERVICES: 819 791.8448 SALES: 819 943.0900 DENISON LINE (OTHER PARTS NOT LISTED ARE AVAILABLE) P6 MODEL DS13-45680 PISTON & SHOE ASSY. P6P DS13-43655 SET: RETAINER PLATE & PISTON SHOE (7) ASSY.