Hydraulic Pump T7AS/T7ASW Series Vane Pumps
|
|
- Blaise Richards
- 5 years ago
- Views:
Transcription
1 Hydraulic ump T7A/T7AW eries Vane umps ressure up to 3 bar Fixed Displacement from 6 to 4 ml/rev. Catalogue HY29-8/UK April 26
2 Catalogue HY29-8/UK General Characteristics General T7A T7AW Vane umps T7A / T7AW Characteristics : displacements, max./min. speeds, max. pressures... 2 Minimum allowable inlet pressure... 3 General characteristics... 3 Ordering code and technical data... 4 Dimensions... 5 Ordering code and technical data... 6 Dimensions... 7 minimum & maximum speed, pressure ratings ize T7A* T7AW* eries Theoretical Displacement Vi B6 5,8 B 9,8 B, B3 2,8 B7 7,2 B2 9,8 B22 22,5 Minimum peed Maximum peed HF-, HF- HF-2 HF-3, HF-4 Maximum pressure HF-, HF-2 HF-, HF-4 HF-3 Int. Cont. Int. Cont. Int. Cont. ml/rev. RM RM RM bar bar bar bar bar bar B25 24, B26 26, B28 28, B3 3, B32 3,8 B34 34, B36 36, B4 4, HF-, HF-2 = Antiwear etroleum Base HF- = Non Antiwear etroleum Base HF-3 = Water in oil Emulsions HF-4 = Water Glycols * lease be careful as the cartridge designation is now in ml/rev. (example : B22 = 22,5 ml/rev.) For further information or if the performance characteristics outlined above do not meet your particular requirements, please consult your local arker Denison office.! Warning FAILURE OR IMROER ELECTION OR IMROER UE OF THE RODUCT AND:OR YTEM DECRIBED HEREIN OR RELATED ITEM CAN CAUE DEATH, ERONAL INJURY AND ROERTY DAMAGE. This document and other information from arker Hannifin, its subsidiaries, sales offices and authorized distributors provide product or system options for further investigation by users having technical expertise. Before you select or use any product or system it is important that you analyse all aspects of your application and review the information concerning the product or system in the current product catalogue. Due to the variety of operating conditions and applications for these products or systems, the user, through his own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance and safety requirements of the application are met. The products are subject to change by arker Hannifin at any time without notice. Offer of ale lease contact your arker representation for a detailled Offer of ale. 2 arker Hannifin Denison Vane ump Division
3 Catalogue HY29-8/UK General Characteristics Vane umps T7A / T7AW Minimum allowable inlet pressure (bar absolute) Cartridge peed RM ize eries T7A T7AW B6 B B B3,8 B3,8,8,8,8,8,8,8,8 B7,88 B7 B2,94 B2 B22, B22 B25,85 B25 B26 B28 B3 B32,8,8,8,8,8,8,8,8,8 B34,88 B34 B36,94 B36 B4, B4 Inlet pressure is measured at inlet flange with petroleum base fluids at viscosity between and 65 ct. The difference between inlet pressure at the pump flange and atmospheric pressure must not exceed,2 bar to prevent aeration. Multiply absolute pressure by,25 for HF-3, HF-4 fluids. by, for ester or rapeseed base.,8,8 eries B6 B B B26 B28 B3 B32 GENERAL CHARACTERITIC T7A T7AW Mounting standard AE J744 IO/39- AE A AE J744 IO/39- AE A Weight without connector and bracket kg 9,5 2,6,3 3,7 Moment of inertia Kgm 2 x -4 uction ressure - AE 4 bolts J58 - IO/DI 662- AE 6 - AE threads 5/6-2 UNF - 2B NTF threads /4 NTF 3/4 - AE 4 bolts J58 - IO/DI 662- AE 2 - AE threads /6-2 UNF - 2B NTF threads 3/4 NTF B 3/4 B /4 - AE 4 bolts J58 - IO/DI 662- AE 2 - AE threads 5/8-2 UNF - 2B NTF threads /4 NTF 3/4 - AE 4 bolts J58 - IO/DI 662- AE 2 - AE threads /6-2 UNF - 2B AE 2 - AE threads /6-2 UNF - 2B /4 B 3/4 B arker Hannifin Denison Vane ump Division
4 Catalogue HY29-8/UK T7A - Ordering Code Vane umps T7A / T7AW Model No. T7A - B7 - R - A T7A series - AE A 2 bolts Mounting flange J744 Displacement * Volumetric displacement (ml/rev.) B6 = 5,8 B = 9,8 B =, B3 = 2,8 B7 = 7,2 B2 = 9,8 B22 = 22,5 B25 = 24,9 Type of shaft T7A = keyed (non AE) Ø 9,5 3 = splined 6/32 (AE B) 3 teeth 4 = splined 6/32 (AE A) 9 teeth Direction of rotation (view on shaft end) R = Clockwise L = Counter-clockwise Modifications Mounting w/connection variables = 4 bolts AE flanges (J58) UNC thread = AE = 3/4 AE 2 = AE thread = 5/6 (AE 6) = /6 (AE 2) 3 = NTF thread = /4 NTF = 3/4 NTF 4 = B threads = B = 3/4 B eal class = BUNA N -,7 bar max. (for mineral oil) 5 = 5 VITON -,7 bar max. (for mineral oil and fire resistant fluids) Design letter orting combination = standard INTERNAL LEAKAGE (TYICAL) 2 3 = ressure = uction Noise level (typical) - t7as b2 Internal leakage q Vs [l/min] ct ct ressure p [bar] Do not operate pump more than 5 seconds at any speed or viscosity if internal leakage is higher than 5% of theoretical flow. ower loss s [kw] 2,5,5 power loss hydromechanical (typical) n = RM n = 22 RM (24 ct) n = 3 RM Load F [N] Lp. Noise level [db(a)] m IO e =,9 bar abs n = RM n = 5 RM = 32 ct Lw = Lp + 8 db(a) u ressure p [bar] permissible radial load = = F Fa haft keyed N ressure p [bar] * Cartridge designation is now in ml/rev. (example : B22 = 22,5 ml/rev.) peed n [RM] Maximum permissible axial load Fa = 6 N arker Hannifin Denison Vane ump Division
5 Catalogue HY29-8/UK T7A - Dimensions - Weight : 9,5 kg Vane umps T7A / T7AW 6,5 65 Ø ,4 Ø 95,3 38,5 44,4 78, 38,2 6,4 KEY ,4 Ø 9, ,4 MAX Ø 47 Ø 82, (THREADED ORT CONNECTION) 63,5 (THREADED ORT CONNECTION),5 x 45 MOUNTING TORQUE : Nm,8 x 45 HAFT CODE Keyed (non AE) 22,3 3/8"-6UNC-2B x 9 DEE - 4 HOLE 26,2,2 HAFT CODE 4 AE A splined shaft Class - J498 6/32 d.p. - 9 teeth 3 pressure angle flat root side fit 47,6 52,4 Option : with valve C.G ,4 6,4 3/8"-6UNC-2B x 7 DEE - 4 HOLE 9,,5 x 45 HAFT CODE 3 AE B splined shaft Class - J498 6/32 d.p. - 3 teeth 3 pressure angle flat root side fit REURE Ø B UCTION Ø A haft torque limits [ml/rev. x bar] haft 3 4 Vi x p max Code A Ø 25,4 B Ø 9,5! AE # 6 5/6-2 UNF - 2B AE # 2 /6-2 UNF - 2B /4 NTF B 3/4 NTF 3/4 B If inlet velocity >,9 m/s, please contact arker Denison. arker Hannifin Denison Vane ump Division
6 Catalogue HY29-8/UK T7AW - Ordering Code Vane umps T7A / T7AW Model No. T7AW - B32 - R - A T7AW series - AE A 2 bolts Mounting flange J744 Displacement * Volumetric displacement (ml/rev.) B26 = 26, B28 = 28, B3 = 3, B32 = 3,8 B34 = 34, B36 = 36, B4 = 4, Type of shaft T7AW = keyed (non AE) Ø 9,5 3 = splined 6/32 (AE B) 3 teeth 4 = splined 6/32 (non AE) teeth Direction of rotation (view on shaft end) R = Clockwise L = Counter-clockwise 2 3 Modifications Mounting w/connection variables = 4 bolts AE flanges (J58) UNC threads = /4 AE = 3/4 AE 2 = AE thread = 5/8 (AE 2) = /6 (AE 2) 3 = NTF & AE threads = /4 NTF = /6 (AE 2) 4 = B threads = /4 B = 3/4 B eal class = BUNA N -,7 bar max. (for mineral oil) Design letter orting combination = standard = ressure = uction Internal leakage q Vs [l/min] ,5 2,5,5 INTERNAL LEAKAGE (TYICAL) 24 ct ct ressure p [bar] Do not operate pump more than 5 seconds at any speed or viscosity if internal leakage is higher than 5% of theoretical flow. ower loss s [kw] power loss hydromechanical (typical) n = RM n = 2 RM (24 ct) n = 28 RM Load F [N] Lp. Noise level [db(a)] m IO 442 Noise level (typical) - t7asw b28 73 e =,9 bar abs 7 n = RM 69 n = 5 RM u = 32 ct 67 Lw = Lp + 8 db(a) = = F 7 Fa haft keyed N 5 3 ressure p [bar] permissible radial load ressure p [bar] * Cartridge designation is now in ml/rev. (example : B22 = 22,5 ml/rev.) peed n [RM] Maximum permissible axial load Fa = 8 N arker Hannifin Denison Vane ump Division
7 Catalogue HY29-8/UK T7AW - Dimensions - Weight :,3 kg Vane umps T7A / T7AW Ø 95,3 6,5 65 Ø 99,7 6, ,2 6,4 25,4 KEY 4,775 / 4,724 Ø 9, ,2 MAXI Ø 52,2 82,55 Ø 82,5 68 (THREADED ORT CONNECTION) 63,5 (THREADED ORT CONNECTION),5 x 45 74, ,4 MOUNTING TORQUE : Nm,8 x 45 HAFT CODE (KEYED NO AE) 7/6"-4UNC-2B x 22 DEE - 4 HOLE 37 3/8"-6UNC-2B x 7 DEE - 4 HOLE 4,2 22,3 3,2 haft torque limits [ml/rev. x bar] haft Vi x p max. 9 24,5,5 x 45 47,6 58, ,5 x 45! If inlet velocity >,9 m/s, please contact arker Denison. Code HAFT CODE 4 plined shaft Class - J498b 6/32 d.p. - teeth 3 pressure angle flat root side fit REURE Ø B UCTION Ø A HAFT CODE 3 AE-B splined shaft Class - J498b 6/32 d.p. - 3 teeth 3 pressure angle flat root side fit A Ø 3,8 AE # 2 5/6-2 UNF - 2B /4 NTF /4 B B Ø 9,5 AE # 2 /6-2 UNF - 2B AE # 2 /6-2 UNF - 2B 3/4 B arker Hannifin Denison Vane ump Division
8 Hydraulics Group ales Offices Europe Austria Wiener Neustadt Tel: +43 () Fax: +43 () Austria Wiener Neustadt (Resp for East Europe) Tel: +43 () Fax: +43 () Belgium Nivelles Tel: +32 () Fax: +32 () Czech Republic Klecany Tel: Fax: Denmark Ballerup Tel: Fax: Finland Vantaa Tel: Fax: France Contamine-sur-Arve Tel: +33 () Fax: +33 () Germany Kaarst Tel: +49 ()23 46 Fax: +49 () Ireland Dublin Tel: +353 () Fax: +353 () Italy Corsico (MI) Tel: Fax: The Netherlands Oldenzaal Tel: +3 () Fax: +3 () Norway ki Tel: Fax: oland Warsaw Tel: +48 () Fax: +48 () ortugal Leca da almeira Tel: Fax: lovakia Ref. Czech Republic pain Madrid Tel: Fax: weden pånga Tel: +46 () Fax: +46 () United Kingdom Warwick Tel: +44 () Fax: +44 () International Australia Castle Hill Tel: +6 () Fax: +6 () Canada Milton, Ontario Tel: Fax: China Beijing Tel: Fax: Asia acific Group Hong Kong Tel: Fax: India Mumbai Tel: /82-85 Fax: /668 Japan Tokyo Tel: +(8) Fax: +(8) Latin America Group Brazil Tel: Fax: outh Africa Kempton ark Tel: +27 ()-96 7 Fax: +27 () UA Cleveland (industrial) Tel: Fax: Lincolnshire (mobile) Tel: Fax: arker Hannifin is the world s premier supplier of motion and control systems and solutions, with sales and manufacturing facilities throughout the world. For product information and details of your nearest arker sales office, visit us at or call free on Catalogue HY29-8/UK 5M 4/6 IRO Copyright 26 arker Hannifin Corporation All rights reserved
Spare Parts List Series VP04 Pneumatic Remote Control Valve
Pneumatic Remote Control Valve Publication No HY17-8820/UK July 2004 Conversion factors 1 kg = 2.2046 lb 1 N = 0.22481 lbf 1 bar = 14.04 psi 1 l = 0.21997 UK gallon 1 l = 0.26417 US gallon 1 cm = 0.061024
More informationGear Pumps/Motors Series PGP/PGM 500
Gear Pumps/Motors Series PGP/PGM 500 Express Delivery Program Note This document and other information from Parker Hannifin GmbH, its subsidiaries, sales offices and authorized distributors provide product
More informationPiston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
More informationSpare Parts List PCL4 01/02/04/05
PCL 01/02/0/0 Hydraulic Proportional Remote Control Valve Series Publication No HY17-13/UK April 200 Conversion factors 1 kg = 2.20 lb 1 N = 0.221 lbf 1 bar = 1.0 psi 1 l = 0.21997 UK gallon 1 l = 0.217
More informationAuxiliary valves PLC series Direct-acting pressure relief valves
uxiliary valves LC series Direct-acting pressure relief valves Catalogue HY17-872/UK ugust 25 Catalogue HY17-872/UK Contents LC series List of contents age General Information... 3 LC53... Single housing
More informationHydraulic Pumps T7 for variable speed drives
FC Hydraulic Pumps T7 for variable speed drives Denison Vane Technology Catalogue HY29-11/UK Content General Information Introduction and product key features 3 Main Technical Data Main table for single
More informationIndustrial Hydraulic Pumps T7E, T7ES. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7E, T7E Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you moving!
More informationHydraulic Power Units 108 Series
Hydraulic Power Units 18 Series Catalogue HY17-131/UK March 3 Catalogue HY17-131/UK Content 18 Series Content Page 18 Series hydraulic power units... 3 Typical applications... 3 Ordering code... 4 Information
More informationIndustrial Hydraulic Pumps T7DBB, T7DBBS. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7DBB, T7DBBS Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you
More informationMobile Hydraulic Pumps T6DCCM. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCCM Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
More informationMobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More informationHydraulic Motor M5A*/M5B* Series Vane Motors
Hydraulic Motor M5*/M5* Series Pressure up to 32 bar Fixed Displacement from 6 to 45 ml/rev. Catalogue HY29-18/UK December 26 Catalogue HY29-18/UK Content General M5* / M5* Warning... 2 General characteristics...
More informationMobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators
More informationMobile Hydraulic Pumps T6EM, T6EP. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6EM, T6EP Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
More informationDENISON HYDRAULICS vane pumps - single, double, triple T6 mobile application.
DENISON HYDRAULICS vane pumps - single, double, triple T6 mobile application. Publ. 1 - AM0701 - A 11 / 98 / 2000 / FB Replaces : 1 - AM 075 - A CONTENTS - T6 SERIES MOBILE APPLICATION GENERAL Features...
More informationRemote Controls PCL4 Hydraulic Proportional Remote Control Valve Series zrc01. Catalogue HY UK June 2003
Remote Controls Hydraulic Proportional Remote Control Valve Series zrc01 Catalogue HY17-8357UK June 2003 Catalogue Information Catalogue layout This catalogue has been designed to give an overview of the
More informationVV6 Auxiliary Valves
Shuttle Valve Subject to alteration without prior notice. The curves and diagrams in this catalogue are typical examples only. While the contents of the catalogue are updated continuously, the validity
More informationVacuum technology Moduflex vacuum generator Peripheral module
Vacuum technology Moduflex generator Peripheral module Catalogue PDE2548SLUK-ev Moduflex generator Summary Page Applications... 3 Vacuum technology... 4 Order codes...5 Complete generators and stand alone
More informationVane pumps single, double & triple T6 mobile application zp20
Vane pumps single, double & triple T6 mobile application zp20 Publ. 1 - AM0701 - A 11 / 98 / 2000 / FB Replaces : 1 - AM 075 - A FEATURES - T6 SERIES MOBILE APPLICATION GREATER FLOW HIGHER PRESSURE BETTER
More informationVane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
More informationPush-Buttons and Visual indicators. Catalogue PD0C00018UK02-ev
Push-Buttons and Visual indicators Catalogue PD0C00018UK02-ev WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
More informationVane pumps single, double & triple T6 mobile application zp20
Vane pumps single, double & triple T6 mobile application zp20 Publ. 1 - AM0701 - A 11 / 98 / 2000 / FB Replaces : 1 - AM 075 - A FEATURES - T6 SERIES MOBILE APPLICATION GREATER FLOW HIGHER PRESSURE BETTER
More informationA Series Piston Accumulators 250 & 350 bar accumulators with fluid volumes from 0.1 litres to 76 litres
Piston Accumulators & 350 bar accumulators with fluid volumes from 0. litres to 76 litres Catalogue HY07-240/UK October 2004 Catalogue HY07-240/UK Introduction Contents Page Accumulator Selection 2 Certification
More informationORDERING CODE - SERIES DT DT6 DOUBLE VANE PUMPS ORDERING CODE DATA SHEET. 72 tdz.com bezares.com DT6* I - CC - * - B -17/14-1- R-00 -B- 1-00
ORDERING CODE - ERIE DT DT6 DOUBLE VANE PUMP ORDERING CODE DATA HEET DT6* I - CC - * - B -17/14-1- R-00 -B- 1-00 pecial threads (ask for available threads) UNC: 00, 01, 10, 11 Metric: 0M, W0, 1M, W1 eal
More informationMiniature Cartridge Valves Diameter 7, 15 & 21mm
Miniature Cartridge Valves Diameter 7, 15 & 21mm C7, C15 & C21 Series C7, C15 & C21 Series Product Description These 2 & 3 way cartridge valves offer the most compact solution with a fast response time
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationMWA /MWB Roundline Cylinders
MWA /MWB For working pressures up to and bar Catalogue HY7-/UK June Catalogue HY7-/UK Introduction Standard MW Cylinders Parker's MW range of cylinders is designed for medium and heavy duty industrial
More informationDT6 TRIPLE VANE PUMPS DT6 TRIPLE VANE PUMPS ORDERING CODE DATA SHEET. 84 tdz.com bezares.com. Seal Class. Design letter
DT6 TRIPLE VANE PUMP DT6 TRIPLE VANE PUMP ORDERING CODE DATA HEET DT6-DCC-B- I 6/38/70-1-R-00-B-1-00 pecial threads(ask for available threads) UNC: 00, 01 Metric: M0, M1 eal Class Design letter 1:NBR 5:VITON
More informationHigh Pressure Single Vane Pump T6C/T6D Series
High ingle Vane Pump T6C/T6D eries Features T6C and T6D eries are fixed displacement and balanced type single vane pumps. The pump is designed for higher operating pressure and greater flow at the same
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationAxial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationHydraulic Motors M3B - M4* Denison Vane Technology, fixed displacement
Hydraulic Motors M3B - M4* Denison Vane Technology, fixed displacement General Series M3B - M4*, Denison Vane Motors GENERAL M3B M4C - M4SC M4D - M4SD M4E - M4SE M4DC - M4SDC General characteristics...
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
More informationRadial piston pump, fixed displacement
Radial piston pump, fixed displacement RE 11260/08.05 Replaces: 07.02 1/8 Type R4 izes 0.40 to 2.00 cm 3 Component series 1X Maximum operating pressure 700 bar R4_d R4-1X/1,00-450WA01M01 Table of contents
More informationAxial piston fixed pump AA2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial piston fixed pump AA2FO RA-A 91401/07.2014 1/32 Replaces: 03.08 Data sheet eries 6 izes Nominal pressure/maximum
More informationSINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET
SINGLE VANE PUMPS BH*, V* and DT/7 single vane pumps BH* SINGLE VANE PUMPS BH*SINGLE VANE PUMP ORDERING CODE F BHQ 7 D 1 A 1 7 1- F means special seals for fire-resistant fluids. Omit if not required.
More informationFixed displacement radial piston pump
Fixed displacement radial piston pump RE 11263/05.13 Replaces: 10.05 1/16 Type R4 izes 1.60 to 20.00 cm 3 Component series 3X Maximum operating pressure 700 bar H7322 2R4-3X/4,00-700RK01M01+AZF8 H7321
More informationRadial piston pump PR4 series 1X
Radial piston pump R4 series 1X RA 1160 Edition: 07.015 Replaces: 08.005 Fixed displacement izes 0,40 to,00 Maximum working pressure 700 bar (10150 psi) Maximum displacement cm 3 (0.1 in 3 ) R4-1X/1,00-450WA01M01
More information2-Circuit Axial Piston Fixed Pump A18FDO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice 2-Circuit Axial Piston Fixed Pump A18FDO E 91540/03.10 1/12 eplaces: 06.09 Data sheet eries 10 ize 63,
More informationTyre Filling. Nitrogen Tyre Inflator Range
Tyre Filling Nitrogen Tyre Inflator Range Air in tyres The air we breathe consists largely of nitrogen, oxygen and water. The oxygen and water contained in compressed air have a negative impact on tyres.
More informationFixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationPneumatic Solutions for Transportation
Pneumatic Solutions for Transportation Mobile Pneumatic Cylinders Parker s Actuator Division offers a complete line of compact, round body, and tie rod cylinders. Highly engineered to extend product life
More informationKT6 Series Variable Displacement Vane Pumps
Care in Application 1. Check speed range, pressure, temperature, fluid quality, viscosity and pump rotation. 2. Check inlet conditions of the pump, if it can accept application requirment. 3. Type of shaft
More informationRadial piston pump PR4 Series 1X
Radial piston pump R4 eries 1X RE 1160 Edition: 07.015 Replaces: 08.005 Fixed displacement izes 0,40 to,00 Maximum working pressure 700 bar Maximum displacement cm 3 R4-1X/1,00-450WA01M01 Features elf-priming,
More informationParflare ECO. Mobile Flaring Machine for Triple-Lok Hydraulic Fittings
37 Parflare ECO Mobile Flaring Machine for Triple-Lok Hydraulic Fittings It s also a piggy bank! Parflare ECO Economical. Simple. Safe. A full-fledged Triple-Lok fitting flaring machine at an economical
More informationAxial Piston Fixed Pump A17FNO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A17FNO RE 91510/03.10 1/12 Data sheet eries 10 ize 125 Nominal pressure 250 bar
More informationAxial Piston Variable Pump A10VO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RA 92703/11.07 1/44 Replaces: 06.07 Data sheet eries 52/53 ize 10...85
More informationInternal Gear Pump, Fixed Displacement PGF
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies neumatics ervice Internal Gear ump, Fixed Displacement GF RE 023/05.2 /20 Replaces: 04.05 Data Type GF sheet Frame sizes,
More informationHydraulic Pumps - Overall Instructions T7/ T67/ T6 Double
Hydraulic Pumps - Overall Instructions T7/ T67/ T6 Double Denison Vane Technology, Fixed Displacement Table of Contents 1. TART-UP INTRUCTION & RECOMMENDATION 1. 1. General & start-up check-up... 3 1.
More informationVane motors Single & double M3B - M4 / M4S series
Vane motors Single & double M3B - M4 / M4S series Publ. 2 - AM 157 - B 07 / 97 / FB Replaces : 2 - AM 157 - A CONTENTS - M3* AND M4* SERIES GENERAL General characteristics... 3 Technical data... 4 General
More informationRotary Actuators. PV Series - Vane type
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Rotary Actuators PV Series - Vane type Catalogue PDE2648TCUK February
More informationVariable Axial Piston Pump A10V Series - 52/53
Variable Axial Piston Pump A10V eries - 52/53 eries 52/53 - Open Circuit Peak Pressure 315 bar (4,600 psi) Nominal Pressure 250 bar (3,600 psi) izes 10cm 3 /rev - 63cm 3 /rev (0.64in 3 /rev-3.8in 3 /rev)
More informationAxial piston variable pump A10V(S)O Series 31
Axial piston variable pump A10V()O eries 31 RE 92701 Edition: 06.2016 Replaces: 01.2012 ize 18 (A10VO) izes 28 to 1 (A10VO) Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features Variable
More informationAxial Piston Variable Pump A10VSNO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VNO RE 92741/03.11 1/16 Data sheet eries 52 ize 15 Nominal pressure 210 bar
More informationService Manual Series F12
Bulletin HY30-5504-M1/UK Effective: June, 2006 Supersedes: August, 2003 List of contents Page General information...3 Specifications...4 Disassembling...5-10 Assembling...11-16 Change of shaft seal...17
More informationVT67DB Double vane pump
ervice Information 4-000 Double vane pump. 0 9 0q 9q 4 5 6 8 Mounting torque Item pos. N-m 68 8 ft-lbs 50 8 8b 8a 8d 8c ITEM 0q INCLUDED 0d 0h 0g 0f haft Code - 0e 0c 0b 0a haft Code - haft Code - haft
More informationDrive Controlled Power Units Variable Speed Drive Solutions with Energy Savings
Drive Controlled Power Units Variable Speed Drive Solutions with Energy Savings Experience Hefty Energy Savings in a Simple Package An unregulated pump motor running at maximum speed is a blatant waste
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 07.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
More informationThe smart replacement for the Pall SRT UE Element Series
The smart replacement for the Pall SRT UE Element Series The smart move Now there s a smarter replacement for Pall SRT UE series elements: The Par Fit SmaRT1 series. The result of engineering investment
More informationAxial piston variable pump A10V(S)O Series 31. Americas. RE-A Edition: Replaces:
Axial piston variable pump A10V()O eries 31 Americas RE-A 92701 Edition: 02.2017 Replaces: 03.2012 ize 18 (A10VO) izes 28 to 140 (A10VO) Nominal pressure 4100 psi (280 bar) Maximum pressure 5100 psi (350
More informationVT6ED - VT6EDM - VT6EDP Double vane pump
ervice Information 4-0007 - M - P Double vane pump. 3 4 Bold printed are recommended repair kits and assemblies 0r 0 9 9r 6 Mounting torque Item pos. 4 5 ft-lbs 38 38 N-m 87 87 7 7 8 b P 8b 8a 8d 5 0g
More informationVane motors Single & double zm21 M3B - M4 / M4S series
Vane motors Single & double zm21 M3B - M4 / M4S series Publ. 2 - AM 157 - B 07 / 97 / FB Replaces : 2 - AM 157 - A CHARACTERISTICS - M3* AND M4* SERIES HIGH STARTING TORQUE EFFICIENCY HIGH VOLUMETRIC EFFICIENCY
More informationInternal gear pump Type PGH Fixed displacement
RE 10 223/07.99 Replaces: 01.98 Internal gear pump Type GH Fixed displacement Frame sizes 2, 3, 4 and 5 eries 2X Maximum operating pressure 350 bar Maximum displacement 6 to 250 cm 3 DR 67180-3/94 Internal
More informationAxial piston variable pump A10VSO Series 31
Axial piston variable pump A10VO eries 31 RE 92711 Edition: 10.2016 Replaces: 01.2012 All-purpose medium pressure pump izes 18 to 140 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features
More informationMotors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
More informationAxial piston variable pump A10VSO series 32. Americas. RE-A Issue: Replaces:
Axial piston variable pump A10VO series 32 Americas RE-A 92714 Issue: 02.15 Replaces: 06.11 izes 45 to 180 Nominal pressure 4100 psi (280 bar) Maximum pressure 5100 psi (350 bar) For industrial application
More informationAxial Piston Variable Pump KVAA
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics ervice Axial Piston Variable Pump KVAA A 92250/02.07 /16 eplaces: 02.04 echnical data sheet eries 6 izes 55...
More informationAxial piston variable pump (A)A10VSO Series 31. Americas. RE-A Edition: Replaces:
Axial piston variable pump (A)A10VO eries 31 Americas RE-A 92711 Edition: 04.2017 Replaces: 04.2012 All-purpose medium pressure pump izes 18 to 140 Nominal pressure 4100 psi (280 bar) Maximum pressure
More informationENGINEERING DATA. Variable Axial Piston Pump A10V Series - 52/53. w w w. F l u i D y n e F P. c o m E m a i l : F l u i D y n e F P.
ENGINEERING DATA Variable Axial Piston Pump A10V eries - 52/53 eries 52/53 - Open Circuit Peak Pressure 315 bar (4,600 psi) Nominal Pressure 250 bar (3,600 psi) izes 10cm 3 /rev - 63cm 3 /rev (0.64in 3
More informationHigh Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors Bulletin 650-Z1 High Pressure Gear Pumps and Gear Motors for today s demanding mobile and industrial applications. The PZG and MZG Series
More informationAxial Piston Variable Pump A10VSO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RE 92714/06.11 1/44 Replaces: 07.10 and RE 92707 Data sheet eries 32 ize
More informationInstallation and Startup Manual Hydraulic Pumps Series VP1-095 /-110/ -130
Visit our homepage for additional support parker.com/pmde Installation and Startup Manual Hydraulic Pumps Series VP1-095 /-110/ -130 Effective: May 01, 2015 Supersedes: January 01, 2013 Important installation
More informationInstructions for Use and Repairs (DT61Series) Cartridge identification, change of rotation, guidelines for repairs
SINGLE AND MULTIPLE VANE PUMPS & VANE MOTORS Introduction General Information BH* & V* General Information DT6* Single Vane Pumps BH*, V* and DT6* single vane pumps Thru Drive Single Vane Pumps V**T thru
More informationAxial piston variable pump A4VG Series 40. Americas. RE-A Edition: Replaces:
Axial piston variable pump A4VG eries 40 Americas RE-A 92004 Edition: 09.2017 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 7250 psi (500 bar) ize 110 280 Nominal pressure
More informationAxial Piston Variable Pump A18VLO Series 11
Axial Piston Variable Pump A18VLO eries 11 RE 92280 Issue: 06.2012 Replaces: 06.2009 ize 80 Nominal pressure 350 bar Maximum pressure 400 bar For commercial vehicles Open circuit Features Variable pump
More informationPulsation Dampers Stainless Steel. up to 690 bar range
Pulsation Dampers Stainless Steel up to 690 bar range HY10-4020-DS/UK Features and Dimensions Design Features and Benefits 1 Shell CE certified in accordance with the PED (97/23/EC) where applicable. Manufactured
More informationAxial Piston Variable Pump A18VLO
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics ervice Axial Piston Variable Pump A18VLO RE 92280/06.09 1/12 Replaces: 02.09 Data sheet eries 10 ize NG80 Nominal
More informationAxial Piston Variable Pump A10VSO
Axial Piston Variable Pump A10VO RE 92711/01.12 1/48 Replaces: 06.09 and RE 92707/11.10 Data sheet eries 31 izes 18 to 1 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Contents Type code
More informationAccumulator Stations Overview. Accumulator and Cooler Division Europe
Accumulator Stations Overview Accumulator and Cooler Division Europe Description: Accumulator module 3 x 20 Litre pressure line accumulators 2 x 4 Litre return line accumulators Fitted with pilot operated
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationAxial piston variable pump A10VO Series 32
Axial piston variable pump A10VO eries 32 RE 92705 Edition: 06.2016 Replaces: 01.2012 Optimized medium pressure pump for powerful machines izes 45 to 180 Nominal pressure 280 bar Maximum pressure 350 bar
More informationAxial piston variable pump A11V(L)O series 40
xial piston variable pump 11V(L)O series 40 RE 92510 Issue: 10.2014 Replaces: 10.2013 izes 110 to 280 Nominal pressure 350 bar (5100 psi) Maximum pressure 420 bar (6100 psi) Open circuit Characteristics
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationAxial Piston Variable Pump A10VO
Axial Piston Variable Pump A10VO RE 92705/01.12 1/44 Replaces: 06.09 Data sheet eries 32 izes 71 to 180 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Contents Type code for standard program
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 02.2017 Replaces: 07.2016 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
More informationAxial piston variable pump A1VO series 10
Axial piston variable pump A1VO series 10 RE 92650 Edition: 09.2013 Replaces: 02.2013 izes 18, 35 Nominal pressure 250 bar Maximum pressure 280 bar Open circuit Features Variable axial piston pump of swashplate
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationVane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi)
Vickers Vane Pumps VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) 5008.00/EN/0596/A A.25 Introduction From the
More informationDenison Hydraulic Motors M5* Vane Motor Technology
Denison Hydraulic Motors M5* Vane Motor Technology Pressures up to 32 bar Catalogue HY29-18/UK Content GENERL M5* / M5* Warning... 2 General characteristics... 3 Description... 4. Ports and hydraulic fluids...
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationDenison Mobile & Industrial Hydraulic Pumps T6*R
Denison Mobile & Industrial Hydraulic Pumps T6*R Vane Technology, fixed displacement () + () + () ± θ θ ± DIMENSIONS & OPERATING CHARACTERISTICS - Weight : 20,4 kg - T6CR SERIES INDUSTRIAL APPLICATION
More informationInternal Gear Pumps. Series QX. Reference: 100-P E-10 1/32. Issue:
Internal Gear Pumps eries QX Reference: -P-000021-E-10 Issue: 11.2011 1/32 2/32 Contents Page 1 General... 5 1.1 Product description... 5 1.2 Advantages... 5 2 Technical data... 5 2.1 General (deviating
More informationHP3V SERIES SWASH PLATE AXIAL PISTON PUMP
H3V ERIE WAH LATE AXIAL ITON UM QUALITY - ERFORMANCE - EFFICIENCY www.henglihydraulic.com HYDRAULIC COMONENT Contents Techanical data... 1 Type introduction... 2 Regulators introduction... 3 erformance
More informationPush buttons and Visual indicators. Catalogue PDE2587TCUK September w w w. a r a p n e u m a t i k. p l. Autoryzowany dystrybutor Parker:
Push buttons and Visual indicators Catalogue PDE2587TCUK September 2014 Autoryzowany dystrybutor Parker: 53-012 Wrocław ul. Wyścigowa 38 tel. 71 364 72 82 fax 71 364 72 83 w w w. a r a p n e u m a t i
More informationTechnical Information Series 45 G Frame powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Series 45 G Frame powersolutions.danfoss.com Contents Frame G Design... 4 Specifications... 5 Performance G74B... 6 Performance G9C... 7 Order code...
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 09.2017 Replaces: 02.2017 High-pressure pump for applications in a closed circuit up to 500 bar ize 110 280 Nominal pressure 450 bar Maximum pressure
More information