Centro-Matic Automated Lubrication Systems Grease Injectors

Transcription

1 SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel. SL-33 Output Operating Pressure.001 cu. in..003 cu. in psig 3500 psig 1500 psig 200 psig.016 cc.049 cc 83 bar 241 bar 103 bar 14 bar Connections Dimensions Stainless Manifold Injector A B Steel Steel (304) Inlet Outlet in. mm in. mm " O.D " NPTF (F) Tube " NPTF (M) Single Injector/No Manifold Single Replacement Injector 1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing ¹ ₈" O.D. as standard. Other outlet connectors for feed line optional. 2. Injectors with manifolds include two mounting clips and screws. 3. Injectors have Nitrile packings (200 F max. / 93 C). Check packing compatibility with synthetic lubricants. 4. Output with indicator cap hand-tightened is.001 cu. in. Maximum output is achieved with two turns at.001 cu. in./turn. 5

2 SL-32 For dispensing petroleum-based lubricants with a viscosity up to NLGI No.2 (refer to Design Guide). May be combined in a circuit of injectors SL-33, SL-V, SL-V XL, SL-1 and/or SL-11. Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel. SL-32 Output Operating Pressure.001 cu. in..008 cu. in psig 3500 psig 1500 psig 200 psig.016 cc.131 cc 83 bar 241 bar 103 bar 14 bar Connections Dimensions Stainless Manifold Injector A B Steel Steel (304) Inlet Outlet in. mm in. mm " NPTF (F) " O.D Tube " NPTF (M) Single Injector/No Manifold Replacement for manifold injectors 1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing ¹ ₈" O.D. as standard. Other outlet connectors for feed line optional. 2. Injectors with manifolds include two mounting clips and screws. 3. Injectors have Nitrile packings (200 F max. / 93 C). Check packing compatibility with synthetic lubricants. 4. Output with indicator cap hand-tightened is.001 cu. in. Maximum output is achieved with five turns at.0014 cu. in./turn. 6

3 SL-V 8 3 /4" (222mm) 3 /8" (19mm) 1 1 /4" (32mm) 1 /8" NPTF 13 /32" (10.3mm) Mounting Holes 2 1 /8" (54mm) 3 /8" NPTF (both ends) 1 1 /2" (38mm) A B 1 3 /8" (35mm) For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of injectors SL-32, SL-33, SL-1, SL-V XL and/or SL-11. Each SL-V injector includes a clear polycarbonate protective cap. Output Operating Pressure Connections Material Manifold Injector Inlet Outlet SL-V 1850 psig 6000 psig 2500 psig 1000 psig 3 8" 1 8" Steel 128 bar 415 bar 170 bar 70 bar NPTF(F) NPTF(F) Dimension A Dimension B Type in. mm in. mm One Injector Manifold /2 63 Single Mounting Hole Two Injector Manifold Three Injector Manifold / / Four Injector Manifold / / Five Injector Manifold / / Six Injector Manifold Replacement for manifold injectors Single injector/no manifold ( 3 8" NPTF(M) inlet) 1. Injector manifolds have 13 32" (10.3 mm) dia. mounting holes for 3 8" bolt. 2. Injectors have polyurethane seals Check compatibility with synthetic lubricants. 3. Injector rated for 180 F (80 C) max. ambient temperature, depending on lubricant used. 4. Injectors include fitting for filling feedlines via alternate outlet port. 5. Output with adjustment screw hand-tightened is.015 cu. in. Maximum output is achieved with five turns at.014 cu. in./turn. 7

4 SL-V XL High-Output 11 3 /16" (284mm) 1 1 /4" (32mm) 3 /4" (19mm) 1 /8" NPTF 13 /32" (10.3mm) Mounting Holes 2 1 /8" (54mm) 3 /8" NPTF (both ends) For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of injectors SL-32, SL-33, SL-1, SL-V and/or SL-11. Two SL-V XL injectors are required to replace one SL-11 injector. Each SL-V XL injector includes a clear polycarbonate protective cap. 1 1 /2" (38mm) A B 1 3 /8" (35mm) Output in 3 (cc) Operating Pressure Connections Material Manifold Injector Inlet Outlet SL-V XL psig 6000 psig 2500 psig 1000 psig 3 8" 1 8" Steel (0.25) (5.00) 128 bar 413 bar 172 bar 69 bar NPTF(F) NPTF(F) Dimension A Dimension B Type in. mm in. mm One Injector Manifold 1 2 Single Mounting Hole / Two Injector Manifold Three Injector Manifold / / Four Injector Manifold / / Five Injector Manifold / / Six Injector Manifold Replacement for Manifold Injectors Single Injector/No Manifold ( 3 /8" NPTF(M) inlet) Spectrum Adjustment Sleeves: Number Output Ratio from Ratio from Sleeve (10/bag only) in 3 (cc) Minimum Output Maximum Output Color N/A (0.25) NA (0.50) red (0.75) silver (1.00) gold (1.25) green (1.88) black (2.50) purple (3.13) blue (3.75) orange (4.38) brown (5.00) yellow 1. Injector manifolds have 13/32" (10.3 mm) dia. mounting holes for 3/8" bolt. 2. Injectors have polyurethane seals Check compatibility with synthetic lubricants. 3. Injector rated for 180 F (80 C) max. ambient temperature, depending on lubricant used. 4. Injectors include fitting for filling feedlines via alternate outlet port. 5. Output with adjustment screw hand-tightened is.015 cu. in. Maximum output is achieved with turns at.014 cu. in./turn. 8

5 SL-1 For dispensing lubricants compatible with Viton packings and viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-11. Available in stainless steel SAE 316, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel. SL-1 Output Operating Pressure Connections Manifold Inlet.008 cu. in..080 cu. in psig 3500 psig 2500 psig 600 psig.131 cc 1.31 cc 127 bar 241 bar 172 bar 41 bar * For complete assembly, you must order stainless steel manifold and corresponding quantity of #84776 Injectors separately. ³ ₈" NPTF (F) Injector Outlet ¹ ₈" NPTF (F) Dimensions Stainless A B Steel Steel (316) in mm in mm * One Injector Manifold 1 Single Mounting * Two Injector Manifold 2 Hole * Three Injector Manifold * Four Injector Manifold * Five Injector Manifold Single injector/no manifold, [ 3 8" NPTF (M) inlet] 81713A 84776* Injector Replacement for manifolded injectors 1. Injector manifolds have ¹³ ₃₂" (10.3 mm) dia. mounting holes for ³ ₈" bolt. 2. Injectors have Viton packings. Check compatibility with synthetic lubricants. 3. Injector rated for 350 F (176 C) max. ambient temperature, depending on lubricant used. 4. Injectors include fitting for filling feedlines via alternate outlet port. 5. Output with adjustment screw hand-tightened is.009 cu. in. Maximum output is achieved with eight turns at.009 cu. in./turn. 9

6 SL-11 For dispensing lubricants compatible with Viton packings and viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-1. Available only as single unit with 1 2" NPTF Female inlet. SL-11 Output Operating Pressure.050 cu. in..500 cu. in psig 3500 psig 2500 psig 800 psig.82 cc 8.2 cc 69 bar 241 bar 172 bar 55 bar Connections Steel Inlet Outlet " NPTF (F) 1 4" NPTF (F) 1. Injectors have Viton packings. Check packing compatibility with synthetic lubricants. 2. Injector rated for 350 F (176 C) max. ambient temperature. 3. Injectors supplied with fitting for filling feed line via alternate outlet port. 4. Output with adjustment screw hand-tightened is.05 cu. in. Maximum output is achieved with 11 1 /2 turns at.040 cu. in./turn. 10