Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
|
|
|
- Antony Lucas
- 6 years ago
- Views:
Transcription
1 Check valve series SHCV, SOCV, SOACV, SACV
2 HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard Cracking pressure fixed from 1/3 to 25psig (0.02 to 1.7bar) Variety of end connections 316 stainless steel body material as standard. Each and every valve is tested at the factory. Technical Data Orifice (mm) Working and Back (20 ) Flow Coefficient Cv Nominal Cracking Pressure SHCV1 SHCV2 SHCV psig (413bar) 5000psig (344bar) /3, 1, 5, 10, 25 psig (0.02, 0.06, 0.34, 0.68, 1.7 bar) Seal Materials Material Viton NBR Ethylene Propylene Temperature Rating 10 to 375 (23 to 190 ) 10 to 250 (23 to 121 ) 50 to 300 (45 to 148 ) To order add the seal material designator to the ordering number. ex) SHCV1S81PN Designator Standard N E Cracking Pressure and Reseal Pressure at 70 (20 ) Nominal Spring Size psig(bar) 1/3 (0.02) 1 (0.068) 5 (0.34) 10 (0.68) 25 (1.7) Cracking Pressure Range psig(bar) 0~3 (0~0.20) 0~4 (0~0.27) 3~9 (0.20~0.62) 7~15 (0.48~1.0) 20~30 (1.3~2.0) Min. Reseal Pressure psig(bar) 6 (0.41) back pressure 5 (0.34) back pressure 2 (0.13) back pressure 3 (0.20) 17 (1.1) Designator 1/3P 1P 5P 10P 25P Materials of Construction No Component Inlet Body Outlet Body Poppet Poppet Stopper ORing Packing Spring Material SS316 SS316 Vitonbonded SS316 SS316 Viton standard PTFE SS304 Testing All valves are factory tested for cracking pressure and reseal performance.
3 Table of Dimensions Order Number Part No. Orifice (mm) Cv Max. End Connection Pressure Rating psig (bar) S2 1/8 SUPERLOK S4 1/4 SUPERLOK SHCV1 S6M 6mm SUPERLOK F4N 1/4 FEMALE NPT 6000 (413) M2N M4N 1/8 MALE NPT 1/4 MALE NPT S6 3/8 SUPERLOK S8 1/2 SUPERLOK S8M S10M 8mm SUPERLOK 10mm SUPERLOK 6000 (413) SHCV2 S12M mm SUPERLOK F6N 3/8 FEMALE NPT 5000 (344) F8N 1/2 FEMALE NPT 4600 (316) M6N 3/8 MALE NPT M8N 1/2 MALE NPT 6000 (413) S12 3/4 SUPERLOK 5000 (344) S16 1 SUPERLOK 4700 (323) S22M 22mm SUPERLOK 5000 (344) SHCV3 S25M 25mm SUPERLOK F12N 3/4 FEMALE NPT 4300 (296) F16N 1 FEMALE NPT 4100 (282) M12N 3/4 MALE NPT M16N 1 MALE NPT 5000 (344) Dimensions, shown on the above table, are measured based on fingertight. All dimensions are for reference only. Dimensions (mm) A B H h (7/16) (9/16) (11/16) (11/16) (7/8) (1) (11/16) (11/8) (11/2) (15/8) Ordering information SHCV2 S 6 1P SS : Valve 2 : End Connection Type 3 : Connection Size 4 : Cracking Pressure Designator 5 : Body Material Designator [SS : 316 stainless steel(standard), B : ]
4 ONEPIECE CHECK VALVES SOCV SERIES Technical Data Features Onepiece Body Working pressure up to 3000 psig (206bar) Temperature rating up to 375 (190 ) with viton seal standard. Cracking pressure fixed from 1/3 to 25psig (0.02 to 1.7 bar) NPT and ISO pipe end connections 316 stainless steel and brass materials Each and every valve is tested at the factory. Nominal Cracking Pressure Maximum Working Pressure at 70 (20 ) Maximum Back Pressure at 70 (20 ) Flow Coefficient (Cv) Temperature Rating 1/3, 1, 10 and 25psig (0.02, 0.06, 0.68,1.7bar) 3000psig (206bar) 3000psig (206bar) SOCV1 / SOCV2 : 0.35 SOCV3 / SOCV4 : 1.20 VITON Oring : 10 to 375 (23 to 190 ) NBR Oring : 10 to 250 (23 to 121 ) (add N to the end of ordering number) Cracking Pressure and Reseal Pressure SOCV Valves with nominal cracking pressure of 20 psig (1.3 bar) or lower may requir back pressure to reseal bubbletight. Testing All valves are factory tested for cracking pressure and reseal performance.
5 Table of Dimensions Order Number SOCV1 SOCV2 SOCV3 SOCV4 Part No. M4N M4R F4N F4R MF4N FM4N M8N F8N MF8N Inlet 1/4 Male ISO 1/4 Female ISO 1/2 Male NPT 1/2 Female NPT 1/2 Male NPT All dimensions are for reference only. End Connection Outlet 1/4 Male ISO 1/4 Female ISO 1/2 Male NPT 1/2 Female NPT 1/2 Female NPT A h Hex mm (in.) (9/16) (3/4) (7/8) 26.9 (11/16) Materials of Construction No. Component Valve Body Materials Stainless steel 1 Insert Lock Screw 2 Insert 3 ORing VITON NBR 4 Poppet 5 Spring SS304 6 Body Ordering information SOCV1 M 4N 1P SS : Valve 2 : End Connection Type 3 : Connection Size 4 : Cracking Pressure Designator(1/3P : 1/3psig, 1P : 1psig, 10P : 10psig, 25P : 25psig) 5 : Body Material Designator [SS : 316 stainless steel(standard), B : ]
6 ONEPIECE ADJUSTABLE CHECK VALVES SOACV SERIES Technical Data Features OnePiece body Working pressure up to 3000psig (206 bar) Cracking pressure adjustable from 3 to 600psig (0.2 to 41.3bar) NPT and ISO pipe end connections in 1/4 and 1/2 in. sizes 316 stainless steel and brass materials Each and every valve is tested at the factory. Cracking Pressure Ranges Working and Back Pressure at 70 (20 ) Temperature Rating Flow Coefficient (Cv) SOACV1 / SOACV2 SOACV3 3 to 50psi (0.2 to 3.4bar) 50 to 150psi (3.4 to 10.3bar) 150 to 350psi (10.3 to 24.1bar) 350 to 600psi (24.1 to 41.3bar) 3000psig (206bar) VITON ORing : 10 to 375 (23 to 190 ) NBR ORing :10 to 250 (23 to 121 ) Cracking and Reseal Pressure at 70 (20 ) Testing All valves are factory tested for cracking pressure and reseal performance.
7 Table of Dimensions Order Number Part No. SOACV1 SOACV2 SOACV3 M4N M4R F4N M8N M8R All dimensions are for reference only. Materials of Construction End Connections 1/4 Male ISO 1/2 Male NPT 1/2 Male ISO A(mm) h HEX mm (in.) (9/16) (9/16) (3/4) (7/8) (7/8) No Component Insert Lock Screw Insert ORing Poppet Spring Body Adjusting screw Locking screw Valve Body Materials Stainless steel VITON SS304 NBR Ordering information SOACV1 M 4N A SS : Valve 2 : End Connection Type 3 : Connection Size 4 : Cracking Pressure Designator (A : 3~50 psi, B : 50~150 psi, C : 150~350 psi, D : 350~600psi) 5 : Body Material Designator [SS : 316 stainless steel(standard), B : ]
8 ADJUSTABLE CHECK VALVE SACV SERIES Technical Data Features Working pressures up to 3000 psig (206 bar) Temperature range from 10 to 375 (23 to 191 ) with Viton Seal Cracking pressures adjustable from 3 to 600psi (0.2 to 14.3bar) Variety of end connections 316 stainless steel and brass materials Each and every valve is tested at the factory. Cracking Pressure Ranges Working and Back Pressure at 70 (20 ) Temperature Rating Flow Coefficient (Cv) SACV 3 to 50psi (0.2 to 3.4bar) 50 to 150psi (3.4 to 10.3bar) 150 to 350psi (10.3 to 24.1bar) 350 to 600psi (24.1 to 41.3bar) 3000psig (206bar) VITON ORing : 10 to 375 (23 to 190 ) NBR ORing :10 to 250 (23 to 121 ) 0.37 Cracking and Reseal Pressure at 70 (20 ) Testing All valves are factory tested for cracking pressure and reseal performance.
9 Table of Dimensions End Connections A Part No. Inlet Outlet (mm) S4 1/4 SUPERLOK 82.0 S6M 6mm SUPERLOK SACV S8M 8mm SUPERLOK 84.3 M4NS4 1/4 SUPERLOK 79.2 All dimensions are for reference only. Materials of Construction H mm(in.) (9/16) (9/16) No Ordering information Component Inlet body Inlet gasket Insert ORing Poppet Spring Center body Adjust screw Locking screw Outlet gasket Outlet Body Valve Body Materials Stainless steel VITON PTFE coated 316SS SS304 PTFE coated 316SS NBR SACV S 4 A SS : Valve 2 : End Connection Type 3 : Connection Size 4 : Cracking Pressure Designator (A : 3~50 psi, B : 50~150 psi, C : 150~350 psi, D : 350~600psi) 5 : Body Material Designator [SS : 316 stainless steel(standard), B : ]
O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
V33, VP33, VA33, VDA33, VH36 and VL36 Series VCH36 Series for CNG/NGV applications Pressures up to 3000 psig (206 bar) and 6000 psig (413 bar)
V, VP, VA, VDA, VH6 and VL6 Series VCH6 Series for CNG/NGV applications Pressures up to g (26 ) and 6 g (4 ) Catalog No. V6 December 2 Features Fixed cracking pressure valves: V, VP, VH6, VCH6 Series Adjustable
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
D-Pro Check Valves. SS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
DPro V, VP, VA, V6 and V6 Series Fixed and Adjustable cracking pressure Pressures up to (6 ) and 6 (4 ) Catalog No V66. May 8 Features Fixed and adjustable cracking pressure. Reliable DKOK Tube Fitting,
SS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
V, VP, VA, VH6 and V6 Series VCH6 Series for CNG/NGV applications Fixed and Adjustable cracking pressure Pressures up to (26 ) and 6 ( ) Catalog No. V67 March 2 Fixed and adjustable cracking pressure.
VC & VPC Series Check Valves
VC & VPC Series Check Valves Up to 10 000psig (689 bar), Steel, and Brass Catalog No. VC-4 July 2015 Design VC and VPC Series Check Valves are designed to prevent reverse flow and keep the fluid in one
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
D-Pro Check Valves. SS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
Features DPro Check Valves V, VP, VA, VH6 and V6 Series VCH6 Series CNG check valves Fixed and Adjustable cracking pressure Pressures up to (6 ) and 6 ( ) Catalog No V6 March 9 Fixed and adjustable cracking
Instrumentation Quick-Connects
Instrumentation Quick-Connects SQC SERIES Features Simple push-pull action to connect and disconnect lines - no tools required. Plug and body are available valved or unvalved. Valves automatically open
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)
Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)
Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking
Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the
METERING VALVES H1300 SERIES.
METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
Check Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
SUBSEA VALVES
SUBSEA VALVES Fitok Subsea Valves are manufactured with some notable differences to standard models to help ensure effective fluid transfer for the Oil and Gas Industry. Valves within the range include
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
5100 Series Inline Relief Valve 10 to 2,400 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 5100 Series Inline Relief Valve 10 to 2,400 PSIG Features Zero Leakage to 95% of Cracking Pressure Positive Reseal
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
One-Piece Ball Valves. VB2GB, VB23GB Series
One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.
SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
J Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
V16 Series Severe Service Union Bonnet Valves Pressure Rating up to 6000psig Catalog No. V16-2 Sept. 2004
R V16 Series Severe Service Union Bonnet Valves Pressure Rating up to 6000psig Catalog No. V162 Sept. 2004 Features Pressure up to 6000 psig (413 bar) @ 37C (100F). High Temperatures up to 300C (572F)
500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass materials Check Valves
RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by t
Relief Valves (RL4 Series) Catalog 411-RL Revised, July 2001 RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted
VN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series 1 www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
T-TYPE & IN-LINE FILTERS
T-TYPE & IN-LINE H-600R, H-600R CNG & H-600 SERIES H-600R FEATURES Bar Stock 316 St.St. or Brass Construction On-line Maintenance High-Pressure Characteristics 6000 psi (413 bar) in 316St.St. and 2000
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
CNG Products. Receptacles, Ball & Check Valves Filters, Tube Fittings. ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested
www.hy-lok.com Catalog No. H-CNG100 April 2014 CNG Products Receptacles, all & Check Valves Filters, Tube Fittings ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested 2007, 2014
SWB 310 SERIES SWING - OUT BALL VALVES
SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
Bleed Valves and Purge Valves
www.swagelok.com Bleed Valves and Purge Valves Bleed Valves Pressures up to psig (689 bar) Temperatures up to 8 F ( C) 36 stainless steel, carbon steel, or alloy R- materials Purge Valves Pressures up
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Relief Valves. Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
Instrument Manifolds. High Technology Valve & Fitting Series
Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed Catalog No. VM-3 July 2015 VMD Series Direct Mount Manifolds EN 61518: IEC 61518 standard is
EVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
Plug Valves. PV Series. End Connections: 1/8 to 1/2 in. (6 to 12mm) Working Pressure: Up to 3,000 psig (200 bar)
Plug Valves PV Series Working Pressure: Up to,000 psig (00 bar) Temperature Range: -0 to 00 F (- to 0 C) Flow Coefficient: Up to 6. End Connections: /8 to / in. (6 to mm) Wide variety of end connection
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001 Introduction Parker VQ Series Needle Valves are the right combination of performance and value for manual or pneumatic onoff control in moderate
Integral Bonnet Bar Stock Needle Valves
Integral Bonnet Bar Stock Needle Valves SBNV Series Features Integral bonnet design Bar stock body Compact design Low operating torques Variety of End Connections Straight and Angle flow patterns Each
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
Oil and Gas Products Pressures to 30,000 psi
Oil and Gas Products MAXIMATOR has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability. Oil
Control Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
Parker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker Autoclave Engineers: Fluid Components Product Catalog February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379
pressure Body and Setting wrenching Orifice Pipe-Away Pipe-Away Style Size Inlet Valve Range Height Hex Size Adapter Outlet
213 Valves Relief valves WATER & POOL HEATERS rego relief VALVES For Gas & Cryogenic Systems 9400 Series Brass or Stainless Steel, Non-ASME All valves are cleaned and packaged for oxygen service per CGA
Bellows-sealed Valves
ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
HYDROSTATIC TEST SYSTEM MANUAL
PDQC HYDROSTATIC TEST SYSTEM MANUAL Technical Specification Operating Instructions Part List Revised 12-2016 Manual # PDQC- 6,000 And PDQC-10,000 1 PDQC PERFORMANCE DATA Model Number Maximum Pressure Volume
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
VA/VG Series On/Off and Shut-off Valve
VA/VG Series On/Off and Shut-off DVAVG862X02 Specifications For other materials or modifications, please consult TESCOM. PARAMETERS Pressure rating per criteria of ANSI/ASME B3.3 Maximum Operating Pressure
TECHNICAL INFORMATION LOW FLOW METER. (ethylene propylene rubber) optional. Valve trim (seat and stem) is 316 stainless.
TECHNICAL INFORMATION LOW FLOW METER FEATURES Wallace & Tiernan Products Purge Meters are low-flow variable area meters which incorporate several improvements in basic design. They feature an unusually
Ball Valves 2-Way Series
Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve
Ball Valves 2-Way Series
Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
Space Saver. Space Saver Actuators. Air Actuated 0700 Series
Actuators Air Actuated 0700 Series HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com Space Saver Air Actuated
Valves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
Metering Valves Catalog 4170-MV December 2010
Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
Mechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
Pipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVi-05 Stainless Steel In-Line Adjustable Pressure Relief
Back Pressure Regulators
Back Pressure Regulators BPR-1, BPR- and BPR-3 Series www.fitokgroup.com 01 Back Pressure Regulators Back Pressure Regulators BPR-1 Series Back Pressure Diaphragm Regulators Features Metal-to-metal seal
CHECK-ALL VALVE. Horizontal-Vertical Flanged & Drilled HV page 5 page 9 page11. Wafer Insert WV. Connector CN CR. page15
CHECK-ALL VALVE Check-All Valve Mfg. Co. 1800 Fuller Road West Des Moines, IA 50265 U.S.A. Phone: 515-224-2301 Fax: 515-224-2326 Website: www.checkall.com E-mail: sales@checkall.com Introduction to Company
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT SERIES Features FULL PORT 3-way L or T flow path Functions as a diverter, selector or mixing valve Four ball seat
DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS
DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve
P630 High Flow Gas Regulator
High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator
Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
Ball Valves (B Series) Catalog 4121-B Revised, November 2001
Ball Valves (B Series) Catalog 4121-B Revised, November 2001 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick
Series 11 Miniature Pneumatic Solenoid Valve 15mm Solenoid Valve
Series 11 Miniature Pneumatic Solenoid Valve 15mm Solenoid Valve Typical Applications Oxygen Conservers Oxygen Concentrators Compression Therapy Gas Chromatography Insufflators Medical & Analytical Gas
Diaphragm : Plastic Metal Globe : Plastic Metal Manifold Pinch Valve
Diaphragm : Plastic...................... 156 Metal...................... 158 Globe : Plastic...................... 160 Metal...................... 164 Manifold..................... 170 Pinch Valve.......................