THREE-PIECE BALL VALVES H-500 SERIES
|
|
|
- Gervais Benson
- 5 years ago
- Views:
Transcription
1 THREE-PIECE BALL VALVES H-500 SERIES
2 H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel Blow-out proof stem with Belleville washer design for long life stem sealing ISO 5211 Mounting Pad for automation Manual Operation with integral locking device Flow coefficient (Cv) from 1.2 to 24.0 MAWP 3000 psig (204 Bar) MAWT 450 F (232 C) 1 GENERAL The H-500 Series is a moderate-pressure instrumentation Ball Valve for general service and instrumentation panels. The valves offer large ports for high flow, tight shutoff, long-life service and low operating torque. The H-500 Series can be used for bi-directional flow, is rated to max psig (204 Bar) and performs on/off service. MATERIALS OF CONSTRUCTION No. Components Material Qty 1 Handle St.St Stem Nut St.St Stem Washer St.St Lock Saddle St.St Belleville Washer St.St Gland St.St Stem Packing MG1241 / PTFE 1 8 Stem Seal MG Stem St.St Locking Device St.St Handle Sleeve Vinyl 1 12 Stop Pin St.St Tightening Bolt St.St End Cap ASTM A351 Gr. CF3M 2 15 Joint Gasket PTFE 2 16 Seat PTFE 2 17 Body ASTM A351 Gr. CF8M 1 18 Ball St.St Washer St.St Bolt Nut St.St
3 PRESSURE TEMPERATURE RATING Virgin PTFE Seats Temp ( C) Inlet Pressure (Psig) Inlet Pressure (bar) PTFE (Virgin Teflon ) Color - White A good all around, general-purpose seat material. PTFE has outstanding resistance to chemical attack by a broad range of organic chemicals, inorganic chemicals and solvents, and is generally considered chemically inert. PTFE is a self lubricating polymer with a very low coefficient of friction, which makes an excellent seat material For all sizes Temp ( F) TFM PTFE Seats Temp ( C) TFM (PFA and PTFE composite) Color - Bright White Inlet Pressure (Psig) Inlet Pressure (bar) Excellent seat material for purity applications, very low residual material during operation. It has lower deformation ratio than PTFE, but higher pressure and temperature rating than PTFE. Chemical resistance is equal to PTFE material Temp ( F) 1/4 to 1 1-1/4 to 2 191
4 St. St. Powder 50% Filled PTFE Seats Inlet Pressure (Psig) Temp ( C) Temp ( F) Inlet Pressure (bar) St. St. Powder Filled PTFE Color - Gray Excellent seat material for general applications to prevent over expansion and seat extrusion. It has lower deformation ratio than PTFE, but higher pressure and temperature rating. Chemical resistance is equal to PTFE material. Up to 1/2 3/4 to 1 1-1/4 to 2 PEEK Seats Temp ( C) PEEK (Poly Ether Keton) Color - Offwhite Inlet Pressure (Psig) Temp ( F) Inlet Pressure (bar) Excellent seat material for high-pressure and high-temperature applications. Excellent chemical resistance. Can be used countinuously to 450 F (232 C) and in hot water or steam without permanent loss in physical properties. High strength for hostile environment and high pressure. Up to 1/2 3/4 to 1 1-1/4 to 2 192
5 H-500 LET-LOK STANDARD CONFIGURATION DIMENSIONS VALVE SIZE Orifice Cv Ball ID A B F C D H J G mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 6 1/ / / / H-510 FEMALE NPT / BSPT STANDARD CONFIGURATION DIMENSIONS VALVE SIZE Orifice Cv Ball ID A B F C D H J G mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 1/ / / /
6 H-510 TUBE SOCKET WELD STANDARD CONFIGURATION DIMENSIONS VALVE SIZE Orifice Cv Ball ID A B F C D OD J G mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 6 1/ / / / H-510 PIPE SOCKET WELD VALVE SIZE Orifice Cv Ball ID A B F C D H J G mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 1/ / / /
7 J C OD G F ID D B A H-580 PIPE BUTTWELD STANDARD CONFIGURATION DIMENSIONS VALVE SIZE Orifice Cv Ball ID A B F C D OD ID J G mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 1/ / / / H-580 EXTENDED AND SHORT TUBE BUTTWELD VALVE SIZE Orifice Cv Ball ID A extended A short B F C D OD J G mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch 6 1/ / / /
8 H-500 OVAL HANDLE VALVE SIZE A B C mm inch mm inch mm inch 1/4'', 3/8, 1/ / A E D C B H-500 GRIP HANDLE (OVAL) VALVE SIZE A B C D E mm inch mm inch mm inch mm inch mm inch 1/4" /8" /2" /4"
9 PACKING ADJUSTMENT Due to the varied service applications of the valve, packing adjustment may occasionally be necessary. Packing is factory adjusted to 1000 psig service. Initial packing adjustment is recommended after installation and prior to start-up. Please find more information on H-500 under Installation Instructions. TESTING The H-500 Series Ball Valves design has been tested for Proof and Burst. Every H500 Ball Valve is factory tested with nitrogen at 1000 psi (69 bar). Maximum allowable leakage across seat is 0.1 std cc/min. CLEANING & PACKAGING HAM-LET s H-500 Ball Valve is treated with HAM-LET Passivation Cleaning and Packaging (Procedure 8075). Oxygen Cleaning and Packaging (Procedure 8055) is available as an option. HAM-LET Ball Valves are designed for operation in the fully closed or fully open position. H-500 SERIES ORDERING INFORMATION OPTIONAL H SS - L - 1/ Valve Series Valve Type End Connection Size Actuator Position 00 - LET-LOK ends 10 - Female ends 80 - Male ends 85 - Male to Female ends 90 - Female to LET-LOK ends 95 - Male to LET-LOK ends Structure Material SS - St.St.316 End Cups - ASTM A351 Gr. CF3M Body - ASTM A351 Gr. CF8M End Connection Type L LET-LOK HL ONE-LOK N NPT R ISO Tapered TSW Tube socket weld TBW Tube buttweld XTBW Extended Tube buttweld PSW Pipe socket weld PBW Pipe buttweld sch 40 1/4 6 MM 3/8 10 MM 1/2 12 MM 3/4 20 MM 1 25 MM Seat Material BLANK PTFE T - TFM 1600 E - St.St. Filled PTFE PK- PEEK Handle BLANK OH GH Lever Handle Oval Handle Grip Handle * all Handles are with locking device standard C15 C20 Standard Optional for 1/2-3/4 only NOTES: C15 Actuators are standard up to 3/4 ends. C20 Actuators are standard for 1 and larger ends and all PEEK packed Valves Actuation Type SR DA Spring Return Double Acting NO Normally Open NC Normally Closed Treatments Imperial / Metric IM Imperial MT Metric BLANK - Standard Cleaning & Passivation OC - Oxygen Clean LF - Lubricant Free Warning Select the right component for safety's sake: The total design of the system must be taken into consideration when selecting components in order to ensure that your HAM-LET products provide safe, trouble-free operation. It is the responsibility of the system designer and the user to consider the compatibility of the materials, of the components and system, the function of the component, appropriate ratings and to ensure proper installation, operation and maintenance. Improper selection or use of products can cause property damage or personal injury, in respect of which the system designer and/or the user shall be solely liable and responsible. 197
10 ORDERING INFORMATION FOR SEAL KITS ORDERING INFORMATION FOR HANDLE KITS The kit includes gaskets, seats, stem packing and stem seal. Z SK - 1/4 - P 1/4 LH Z HK - - Body Designator per End Connections Seal Material Body Designator per End Connections Handle 1/2 For 1/4, 1/2, 3/8, 6MM, 10MM, 12MM P - PTFE T - TFM /2 For 1/4, 1/2, 3/8, 6MM, 10MM, 12MM LH OH Lever Handle Oval Handle 3/4 For 3/4, 20MM 1 For 1, 25MM E - St.St. Filled PTFE PK- PEEK 3/4 For 3/4, 20MM 1 For 1, 25MM GH Grip Handle * all Handles are with locking device standard ACTUATORS ORDERING INFORMATION C 15 - DA - IM Actuator Size DA- Double Acting SR- Spring Return IM - Imperial MT - Metric Note: For actuated valve please refer to H-500 Ordering Information. ACTUATOR MOUNTING KIT Mounting kit includes bridge, adapter, panel nut and wall mount bushings. Z MK - 1/4 - C15 - IM Mounting Kit MK- Mounting Kit Body Designator per End Connections 1/2 For 1/4, 1/2, 3/8, 6MM, 10MM, 12MM Actuator size C15 C20 Imperial / Metric IM - Imperial MT - Metric 3/4 For 3/4, 20MM 1 For 1, 25MM NOTES: C15 Actuators are standard up to 3/4 ends C20 Actuators are standard for 1 and larger ends and all PEEK packed Valves.. TFM - TM DuPont, Teflon - TM DuPont H-500, Rev.06, January
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
T-TYPE & IN-LINE FILTERS
T-TYPE & IN-LINE H-600R, H-600R CNG & H-600 SERIES H-600R FEATURES Bar Stock 316 St.St. or Brass Construction On-line Maintenance High-Pressure Characteristics 6000 psi (413 bar) in 316St.St. and 2000
HIGH PRESSURE TRUNNION BALL VALVES TBV SERIES
HIGH PREURE TRUNNION BALL VALVE TBV ERIE TBV FEATURE On/Off-service ball valve with 2-way pattern Diverter, selector and on/off-service ball valve with 3-way pattern MAWP* 10,000 psi (689 bar) with PEEK
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
SERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
Bushing Viton O-ring (Other material available) Anti-Static Device
Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
FPS Safety Shut-Off Valves. CSA and FM Approved
FPS Safety Shut-Off CSA and FM Highly Visible Beacon/Indicator FPS FPS is a leader in reliable, cost-effective shut-off valve technology. Our automatic and manual shut-off valves are in service in industries
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
METERING VALVES H1300 SERIES.
METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F
Bushing Viton O-ring (Other material available) Anti-Static Device
API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by
Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS
DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
Section G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com
3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
SERIES 9000 Double Offset HP Butterfly Valves
SERIES 9000 Double Offset HP Butterfly Valves Publication S9000-101 Issue 5/18 Rev. D DESIGN Design Characteristics STEM DESIGN: Available in square shaft for easy mounting of actuators, levers and gear
Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
Ball Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
Swagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
PFA Needle Valves. 4RP Series
PFA Needle Valves 4RP Series High-purity PFA material Pressures up to 180 psig (12.4 bar) Temperatures up to 300 F (148 C) 1/4, 3/8, and 1/2 in. Swagelok PFA tube fitting end connections www.swagelok.com
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
Ball Valves in cast 316 SS multi-port, bolted construction
65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options
Technology for a Better Future. VALVES International Edition.
www.genstartech.com VALVES International Edition (Needle Valve, Metering Valve, Ball Valve, Diaphragm Valve, Gauge Valve, Check Valve, Excess Flow Valve, Relief Valve, Cylinder Valve) Technology for a
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
Series FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
Cv Values L & T-PORT 90 T-PORT STRAIGHT THRU
This 3-way ball valve offers diverting and mixing flow patterns, often eliminating the need for two valves. The full port design is easily automated and is available with various seat materials. The bolts
INSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
Series 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
APS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com A0SR Standard Features Indicator A position indicator
Section G TOP-FLO T4V Sanitary V-Port Control Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
instrumentation ball valves
7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com instrumentation
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE Design & Features ASME / BPE-2009 Designed specifically for the demanding process requirements found in the pharmaceutical,
)SLIM LINE) MONOFLANGE VALVES
)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are
FSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
DRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
Series. Stainless Steel Ball Valve 1/4-1
76-100 Series Stainless Steel Ball Valve 1/4-1 Threaded, 2000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C,
The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications
The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
SERIES 86 INSTRUMENTATION 3-PIECE TUBE FULL PORT BALL VALVES
SERIES 86 INSTRUMENTATION 3PIECE TUBE FULL PORT BALL VALVES SHARPE SERIES 86 INSTRUMENTATION BALL VALVES STANDARD FEATURES Tube Full Port Design (TFP) 3Piece Design Integral ISO Mounting Pad Lockable Handle
Industrial Threaded Ball Valves
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel KITZ CORPORATION OF AMERICA INDUSTRIAL THREADED BALL VALVES Carbon and Stainless Steel CONTENTS Figure Number
10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2014. From the materials
FT, FD Series 5; FT Series 6
FT, FD Series 5; FT Series 6 Female NPT (Q-), Socket Weld (U-), Butt Weld for Sched. 40 (B-), Butt Weld for Sched. 40 (B-) 150# Flange (L-) Size ode Units 1/ DN 15 3/ DN 20 DN 25 DN 40 DN 50 DN 80 DN 100
FEATURES FLP SERIES COMPLETE ASSEMBLIES FL SERIES PRODUCT CONFIGURATOR ONE VALVE DOES IT ALL
Thermal Shutdown Valves for Fire Protection Systems FLP SERIES COMPLETE ASSEMBLIES BI-TORQ Valve Automation s complete line of API 0 certified quarter-turn valves suit a wide range of applications. Carbon
Process Cooling Water. PCW Ball Valves
Process Cooling Water PCW s PCW Process Cooling Water (PCW) s PCW Applications Process Cooling Water (PCW), City Water, Potable Water Product Description Size Range: NPS 1/2 to NPS 6 Temperature Range:
See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section.
See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section. water gauges 20-100 Series light Pattern Bronze Water Gauges LEAD FREE OPTION COMING SOON!
Locked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel KITZ CORPORATION OF AMERICA INDUSTRIAL THREADED BALL S Carbon and Stainless Steel CONTENTS Figure Number
DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动
DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents
Section G TOP-FLO Series 77 High Purity Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
3000R Series. Reduced Port 2-Way 3-pc Body
Up to 4 psi WOG (276 bar) 3R Series 3R-xxx Series Valve Quick Spec Product Scope Size Range 1/2", Body Type 3-pc, non Swing-out design End Connections Flanged, NPT, Weld, Custom Pressure Rating up to 4
3-Piece High Pressure Ball Valves
3-Piece High Pressure Ball Valves Contromatics 3-Piece High Pressure Ball Valves Series 735/ 835 3/4"- 21/2" Reduced Port, 45 WOG* 735-Carbon Steel Body, Stainless Steel Trim 835-All Stainless Steel Construction
3000F Series. Full Port 2-Way 3-pc Body
Up to 4 psi WOG (275 bar) 3F Series 3F-xxx Series Valve Features Up to 4 psi service Special barstock body material options including Alloy 2, Duplex, Hastelloy C, Monel, Titanium, 254 SMO, Bronze and
87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
FEATURES ONE VALVE DOES IT ALL IDEAL FOR YOUR VALVE... OR OURS SURE STOP MOUNTING PLATE BALL OR BUTTERFLY VALVES
Fusible Link Valves for Fire Protection Systems IDEAL FOR YOUR VALVE... OR OURS In addition to high-quality designs for BI-TORQ s own API 0 fire rated valves, we have manufactured customized assemblies
CV3000 Series. Control Ball Valve 4000 psi WOG (276 bar) Fully Customizable Flow Control Inserts Carbon, Stainless, Alloy Bar Stock Construction
4 psi WOG (276 bar) CV3 Series CV3F-xxx Series Full Port Valve CV3R-xxx Series Reduced Port Valve Features Uni-directional control valve Zero leakage shutoff, soft seated Upstream Cv plate control element
Marwin Valve 4700 Series 2000 WOG Three Piece Ball Valves
4700 Series 2000 WO Three Piece Ball Valves Fire Tested API 607 4 th ed. APPROVEDDD The new Marwin 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WO rated
PBV. Threaded and Socketweld Ball Valves P.B.V.
PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar
SERIES 7400 THREE PIECE BALL VALVES
SERIES 7400 THREE PIECE BALL VALVES Publication S7400-101E Issue 05/16 SERIES 7400 Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Seat TFM* RPTFE PEEK ALTA Stem 316 Stainless Steel ISO 5211 Mounting
62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves
![62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves](/thumbs/86/94937198.jpg "62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves")
Table of Contents Bronze Ball Valves 3 Series See Commercial Price List [CPPL9000] 70 Series...4-5 71 Series...5 75 Series...6 77 Series...7-8 77C Series...8-9 77W Series See Commercial Price List [CPPL9000]
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
Standard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
Medium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range Bottom-loaded stem
W SERIES 3-PIECE BALL VALVES
W SERIES 3-PIECE BALL VALVES In-Line repairable metal seated ball valves for industrial and process applications. Design Pressure Rating 3000 WOG Available In Sizes ¼ to 3/4 2250 WOG Available In Sizes
F20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
S E LV Ball Valves VA
VALVES Ball Valves VNE 18 2 - WAY BALL VALVE SPECIFICATIONS BALL VALVES BALL VALVES... Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
Evans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
Ball and Stem Materials: 316 Stainless Steel Alloy 20 Monel Hastelloy C. Service Applications: Hydraulics Chemical
13560 Larwin Circle, Santa Fe Springs, CA 90670 Phone: (562) 802-2255 (800) 783-7836 Fax: (562) 802-3114 Netsite: www.svf.net E-mail: Sales@SVF.net R8 SERIES ANTI-STATIC API-607-4th EDITION 1/4 6 PROCESS
HM SERIES ULTRA-HIGH PURITY, METAL-DIAPHRAGM VALVES FOR GAS DELIVERY SYSTEMS ULTRA CLEAN VALVES
HM SERIES ULTRA-HIGH PURITY, METAL-DIAPHRAGM VALVES FOR GAS DELIVERY SYSTEMS HM & HMS SERIES METAL DIAPHRAGM VALVES The HM & HMS Series includes Metal-Diaphragm, Ultra- Clean s, size 1/4". The HM & HMS
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
High Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
Medium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
Swagelok Alternative Fuel Service (AFS) Ball Valves
Swagelok Alternative Fuel Service () Ball Valves 461 Swagelok Alternative Fuel Service () Ball Valves For High-Pressure, High-Flow Applications Swagelok Ball Valves Working pressures up to 6000 psig (413
KTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
BV Series. Threaded Industrial Control Ball Valves 2 Way 1/2-4. Increased Linear Response. Flow Curve Chart
The BV Series Threaded Industrial Ball Valve product line is ideally suited to high temperature and high pressure water or steam as well as a wide range of heavy commercial HVAC control applications. These
ball valves ball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves
7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves HOKE s 7 Series Fire Safe Valves meet demanding application requirements in the production environment of chemical and petrochemical processing facilities.