Integral Bonnet Bar Stock Needle Valves
|
|
|
- Gwenda Mason
- 5 years ago
- Views:
Transcription
1 Integral Bonnet Bar Stock Needle Valves SBNV Series Features Integral bonnet design Bar stock body Compact design Low operating torques Variety of End Connections Straight and Angle flow patterns Each and every valve is tested at the factory Specifications Pressure rating Temperature rating Body material Orifice 6000psig F (38 C) -65 to 450 F (-54 to 232 C) with PTFE packing and up to 600 F (315 C) with PEEK packing 316 stainless steel and Alloy and 0.25 (4.3mm and 6.4mm) Testing Each Valve is tested with nitrogen at 1000psig (69bar) to maximum allowable leak rate of 0.1 SCCM. Hydrostatic shell test is porformed at 1.5 times of the working pressure. (OPTION) Materials of Construction No. 1 Component Bar Handle Knob Handle Set Screw 2 Packing Nut 3 Packing Gland *4 Packing Support Material Grade / ASTM Specification Stainless Steel Alloy 400 SS316 / A276 Stainless Steel Phenolic with brass insert Stainless Steel Alloy R-405/B164 *5 Packing PTFE (Standard), PEEK (Optional) *6 Vee Stem SS316 / A276 Alloy R-405/B164 Soft Seat Stem SS316 / A276 with PCTFE ALLOY R-405/B164 with PCTFE *7 Body SS316 / A479 ALLOY R-405/B164 * Wetted components are marked "*"
2 SBNV Series Table of dimensions Order Number End Connections Dimensions Orifice Cv Series Part No. Inlet Outlet L1 A1 A2 L2 B1 B2 E F H SBNV1 F 4N 1/4 FEMALE NPT F 4R 1/4 FEMALE ISO M 4N 1/4 MALE NPT MF 4N 1/4 MALE NPT 1/4 FEMALE NPT MS 4N-4 1/4 MALE NPT 1/4 SUPERLOK S 4 1/4 SUPERLOK SBNV2 F 6N 3/8 FEMALE NPT 31.8 F 8N 1/2 FEMALE NPT F 8R 1/2 FEMALE ISO MF 6N 3/8 MALE NPT 3/8 FEMALE NPT 31.0 MF 8N /2 MALE NPT 1/2 FEMALE NPT MF 12N-8N 3/4 MALE NPT 1/2 FEMALE NPT MS 6N-8 3/8 MALE NPT 1/2 SUPERLOK S 6 3/8 SUPERLOK S 8 1/2 SUPERLOK *All dimensions in millimeters. All dimensions are for reference only, subject to change. *Dimension shown with SUPERLOK nuts measure in the finger-tight, where applicable.
3 Technical Data Temperature and Pressure Rating Body Material Stem Temperature Rating SS316 Vee Soft Seat Vee Alloy 400 Soft Seat *The above ratings are for a standard valve with PTFE packing. *Extreme temperature fluctuations may require packing adjustment. -65 F~200 F (-54 C~93 C) -65 F~200 F (-54 C~93 C) Pressure Rating@ -65 F~100 F (-54 C~38 C) 6000psig (413 bar) 5000psig (345bar) Temperature vs Working Pressure -65 F (-54 C) to Temperature Rating Pressure Temperature Rating SS316 Alloy F (38 C) 6000psig (413bar) 5000psig (435 bar) 200 F (93 C) 5160psig (355bar) 4400psig (303 bar) 300 F (148 C) 4660psig (321bar) 4120psig (284 bar) 350 F (176 C) 4470psig (308bar) 4050psig (279 bar) 400 F (204 C) 4280psig (295bar) 3980psig (274bar) 450 F (232 C) 4130psig (284bar) 3970psig (273 bar) Packing and Body material vs Temperature and Pressure Rating Packing Material Body Material Temperature Rating Pressure Rating@ Max. Temperature PTFE (Standard) SS316 Alloy psig (284 bar) 3970psig (273 bar) SS F~600 F (-54 C~315 C) 3760psig (259bar) PEEK Alloy F~500 F (-54 C~260 C) 3960psig (272bar) * Alloy 400 not applicable over 500 F(260 C) * PEEK is not recommended for service with aromatic heat transfer or concentrated sulfuric and nitric acids. Other limitations may apply. Flow Data at 100 F (37 C) Flow Coefficient at Turns Open Handle 316 Stainless steel bar handles are standard. Black phenolic knob is standard for soft seat stem Valves. Anodized black aluminum bar handles Available Stem Type Two stem types -Vee stem : All metal, Vee stem tip (Standard) -Soft Seat Stem: PCTFE stem tip (Optional)
4 Ordering Information LOK-SBNV2-MS-6N-8-KH-A-PEST-SS Valve Series SBNV1 : 4.3mm Orifice SBNV2 : 6.4mm Orifice 2. Port Type (Inlet x Outlet) S : SUPERLOK Tube Fitting M : Male Pipe Thread F : Female Pipe Thread MS : Male Pipe Thread x SUPERLOK Tube Fitting MF : Male Pipe Thread x Female Pipe Thread 3. Port Size Pipe Thread Designation Size (inch) 1/8 1/4 3/8 1/2 3/4 1 Screwed BSPT 2R 4R 6R 8R 12R 16R Screwed NPT 2N 4N 6N 8N 12N 16N Tube O.D Designation 1/4 3/8 1/2 3/4 1 Designation Tube O.D (mm) Designation 6M 10M 12M 20M 25M 4. Handle Nil : Stainless Steel Bar Handle (Standard) KH : Black Phenolic Knob Handle AH : Anodized black aluminum bar handle 5. Flow Pattern Nil : Straight Pattern (Standard) A : Angle Pattern 6. Packing Material Nil : PTFE (Standard) PE : PEEK 7. Stem Type Nil : Vee Stem (Standard) ST : Soft Seat Stem 8. Body Material SS : 316 Stainless Steel M : Alloy 400 (Monel) Examples ex1) SBNV1 - S SS - SBNV1 Series / [Inlet]SUPERLOK x [Outlet]SUPERLOK / Port Size: 1/4" x 1/4" / SS316 Bar Handle / Straight Pattern / PTFE packing / Vee Stem / 316 Stainless Steel Body ex2) SBNV2 - F - 8N - KH - ST - SS - SBNV2 Series / [Inlet]Female Pipe Thread x [Outlet]Female Pipe Thread / Port Size: 1/2"NPT x 1/2"NPT / Black phenolic knob handle / Straight Pattern / PTFE packing / Soft Seat Stem / 316 Stainless Steel Body ex3) SBNV2 - MF - 8N - A - PE - SS - SBNV2 Series / [Inlet]Male Pipe Thread x [Outlet]Female Pipe Thread / Port Size: 1/2"NPT x 1/2"NPT / SS316 Bar Handle / Angle Pattern / PEEK packing / Vee Stem / 316 Stainless Steel Body
5 INDIA STAUFF India Pvt. Ltd. Gat. No Pune Nagar Road, Wagholi Pune, Tel.: Fax: POLAND STAUFF Polska Sp. z o.o. Miszewko 43 A Banino Tel.: Fax: sales@stauff.pl BRAZIL STAUFF Brasil Ltda. Avenida Gupê Galpão 2 - Bloco A Barueri - São Paulo CEP Tel.: Fax: stauff@stauffbrasil.com ITALY STAUFF Italia s.r.l. Viale Nuova Valassina 78 angolo Via Baragiola sn Desio (MI) Tel.: Fax: sales@stauff.it RUSSIAN FEDERATION STAUFF LLC Office 205, Building 7 Scharikopodschipnikovskaya 11 Moscow, Tel.: Fax: sales@stauff.ru CANADA STAUFF Canada Ltd. 866 Milner Avenue Scarborough Ontario M1B 5N7 Tel.: Fax: sales@stauffcanada.com IRELAND STAUFF Ireland Ltd. Unit B3 Weatherwell Business Park Clondalkin Dublin 22 Tel.: Fax: sales@stauff.ie UNITED KINGDOM STAUFF UK 500, Carlisle Street East Off Downgate Drive Sheffield, S4 8BS Tel.: Fax: sales@stauff.co.uk CHINA STAUFF International Trading (Shanghai) Co., Ltd. No , Lane 369, Chuang Ye Road Jushuo Industrial Zone, Kang Qiao Shanghai, Tel.: Fax: info@stauff.com.cn KOREA STAUFF Korea Ltd , Dadae-Dong Saha-Ku Pusan, Tel.: Fax.: info@stauff.co.kr UNITED STATES STAUFF Corporation 7 Wm. Demarest Place Waldwick, New Jersey Tel.: Fax: sales@stauffusa.com FRANCE STAUFF S.A.S. 230, Avenue du Grain d'or Z.I. de Vineuil - Blois Sud Vineuil-cedex Tel.: Fax: direction@stauffsa.com NEW ZEALAND STAUFF Corporation (NZ) Ltd. P. O. Box Greenmount, Auckland Unit D, 103 Harris Road East Tamaki, Auckland Tel.: Fax: info@stauff.co.nz Globally available through wholly-owned branches and distributors in all industrial countries. GERMANY WALTER STAUFFENBERG GmbH & Co. KG P. O. Box 1745 D Werdohl Im Ehrenfeld 4 D Werdohl Tel.: Fax: filtrationtechnology@stauff.com STAUFF AUSTRALIA STAUFF Corporation Pty. Ltd. P. O. Box 227 Unanderra, NSW, Doyle Avenue Unanderra, Wollongong, NSW, 2526 Tel.: Fax: sales@stauff.com.au
Integral Bonnet Needle Valves
Integral Bonnet Needle Valves SINV Series eatures Compact design Low operating torques Panel mountable Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve
Union Bonnet Needle Valves
Union Bonnet Needle Valves SUNV Series Features Panel mountable Nonrotating stem tips Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve is tested at
Valves and Quick Connectors
Local Solutions For Individual Customers Worldwide Valves and Quick Connectors Customer Satisfaction 2 Valves and Quick Connectors Introduction Valves and Quick Connectors 3 Index T&S Ball Valves 06 SBV
2-Way 3-Way 2-Way 3-Way. Component
BT Sris (,000psig) BTH Sris (10,000psig) Componnt 2-Way 3-Way 2-Way 3-Way 1 Handl Phnolic with brass insrt Phnolic with brass insrt 2 St scrw Stainlss stl Stainlss stl 3 Panl nut S1/A27 S1/A27 4 Body S1/A479
STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters MF-MQ. Operating Pressure: max 280 bar (4.
STAUFF F I LT R AT I O N T E C H N O L O G Y Medium Pressure Filters MFMQ Operating Pressure: max 280 bar (4.000 PSI) Local solutions for individual customers worldwide STAUFF Filtration Technology MediumPressure
Local Solutions For Individual Customers Worldwide. Mobile Filter Systems SMFS-P and SMFS-U. Product Catalogue
Local Solutions For Individual Customers Worldwide Mobile Filter Systems SMFS-P and SMFS-U Product Catalogue Umschlag Filterwagen DE.indd 5 18.08.2011 11:59:42 Filtration Technology STAUFF Filtration Technology
STAUFF STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters SMPF FILTRATION TECHNOLOGY
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, 24-26 Doyle Avenue,
FILTRATION TECHNOLOGY STAUFF. STAUFF Check Oil Analysis & Oil Sampling Kit. Quality and Service Worldwide
FILTRATION TECHNOLOGY 2003 STAUFF STAUFF Check Oil Analysis & Oil Sampling Kit Quality and Service Worldwide STAUFF Check Oil Analysis & Oil Sampling Kits Australia Stauff Corporation (Pty.) Ltd. P.O.Box
STAUFF STAUFF. Local solutions for individual customers worldwide. Return Line Filters RTF FILTRATION TECHNOLOGY. Ordering Code # :SFT A - UK
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, Unanderra Wollongong,
Quality and Service worldwide. Hydraulic Accessories Flow Indicators
Quality and Service worldwide Hydraulic Accessories Flow Indicators Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0
Oil Solutions. RIF 300 Return Line Filters. Local solutions for individual customers worldwide FILTRATION TECHNOLOGY
Oil Solutions FILTRATION TECHNOLOGY RIF 3 Return Line Filters Local solutions for individual customers worldwide www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter Stauffenberg GmbH &
Product Overview VOSWINKEL Quick Release Couplings
Multi Couplings Product Overview VOSWINKEL Quick Release Couplings VOSWINKEL Quick Release Couplings VOSWINKEL couplings have proven their value for many years in practical use in hydraulic systems. The
STAUFF Test. Test Couplings. Test Adaptors. Test Hoses and Connectors. Product Overview
Test Adaptors Test Hoses and Connectors Product Overview STAUFF Test Test couplings from the STAUFF Test product range are already planned in suitable positions in the hydraulic system during the design
Bell Housings & Couplings Quality and Service worldwide
ISO 9002 Lic. 3765 Standards ustralia Bell Housings & Couplings Quality and Service worldwide Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel.
Local Solutions For Individual Customers Worldwide. Cutting Ring Assembly and 37 Tube Flaring Machine STAUFF Press SPR-PRC-MA.
Local Solutions For Individual Customers Worldwide Cutting Ring Assembly and 37 Tube Flaring Machine STAUFF Press SPR-PRC-MA Product Catalogue STAUFF Connect Combined Cutting Ring Assembly and 37 Tube
STAUFF SWG Stud Welding System for STAUFF Clamps
Local Solutions For Individual Customers Worldwide Versatile combination and adaptation options STAUFF SWG Weld Stud developed for efficient assemblies Designed for original STAUFF Pipe, Tube, Hose and
Replacement Filter Elements. Replacement Filter Elements. for Single, Double and Automatic Filters
Replacement Filter Elements Replacement Filter Elements for Single, Double and Automatic Filters This is STAUFF The companies of STAUFF Group have been developing, manufacturing and distributing pipework
Oil Solutions. Tank Top Return Filters RTF. Local solutions for individual customers worldwide FILTRATION TECHNOLOGY
Oil Solutions FILTRATION TECHNOLOGY Tank Top Return Filters RTF Local solutions for individual customers worldwide www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter Stauffenberg GmbH
Endless Opportunities. Pressure Transmitter and Reader. of the Series PT-RF. Pressure Transmitter and Reader. of the PT-RF Series
Endless Opportunities of the Originating and located in Werdohl in the German Sauerland region, we have become an internationally leading developer, manufacturer and supplier of pipework equipment and
Mobile Filtration Systems SMFS-P and SMFS-U
SMFS-P-015 SMFS-U-030 SMFS-U-DL-015-G SMFS-U-060 SMFS-U-110 SMFS-U-CM-110 Mobile Filtration Systems SMFS-P and SMFS-U Introduction 2 Introduction STAUFF Filtration Technology offers a complete range of
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
Fluid Technology Components for Mobile Construction Machinery
Local Solutions For Individual Customers Worldwide STAUFF Clamps STAUFF Test Filtration Technology Diagtronics Hydraulic Accessories Valves Flanges Fluid Technology Components Product Overview Mobile Machines
Quick Release Couplings Series UX
Maximum Volumetric Flow The coupling series UX exceeds the requirements of ISO 71-1 series and ISO 67 for the agricultural sector and is uncompromisingly designed for maximum efficiency. bar / MPa / 36
Tube Connectors. Assembly Tools and Devices. Product Overview STAUFF Connect
Tube Connectors Assembly Tools and Devices Product Overview STAUFF Connect STAUFF Connect The STAUFF Connect product group is closely aligned with the market requirements and contains an extensive range
Product Overview STAUFF Diagtronics
Pressure Gauges Hydraulic Testers Oil Analysis Equipment Product Overview STAUFF Diagtronics With measuring, testing, display and analysis devices and equipment from the STAUFF Diagtronics product range,
High Pressure Filters SF
FILTRTION TECHNOLOGY High Pressure Filters SF Quality and Service worldwide ustralia: Stauff Corporation (Pty.) Ltd. P.O. ox 227 24-26 Doyle venue, Unanderra Wollongong, N.S.W. US-2526 Unanderra Tel.:
Integral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
Clamps Heavy-Series. Quality and Service worldwide
Clamps eavy-eries Quality and ervice worldwide Distributor Walter tauffenberg mb & Co. K P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0 Fax: + 49 (0) 2392 2505 e-mail:
STAUFF STAUFF. Local solutions for individual customers worldwide. Diagtronics FILTRATION TECHNOLOGY. Ordering Code # :SFT A - UK
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227 Unanderra Wollongong,
Quality and Service worldwide. Test 20 Typ SMK (M 16 x 2)
Quality and Service worldwide Test 20 Typ SMK (M 6 x 2) Distributor Walter Stauffenberg mbh & Co. K P.O.Box 745 D-58777 Werdol Im Erenfeld 4 D-5879 Werdol Tel. : + 49 (0) 2392 96-0 Fax: + 49 (0) 2392 2505
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
STAUFF. Clamps. Local solutions for individual customers worldwide
ection 1 Clamps TAUFF Clamps Local solutions for individual customers worldwide Walter tauffenberg Gmb & Co. KG P.O.ox 1745 58777 Werdohl Germany Im Ehrenfeld 4 58791 Werdohl Germany Telephone: + 49 2392
VN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
SWB 310 SERIES SWING - OUT BALL VALVES
SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable
HAWE Rapid Range. Local solutions for individual customers worldwide
HAWE Rapid Range Local solutions for individual customers worldwide Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
STAUFF. Clamps. Local solutions for individual customers worldwide
TAUFF Clamps Note: The changeover of the material code W3 from the surface finishing»carbon steel t 37, zinc plated«to the chromium(vi) free surface finishing»carbon steel t 37, zinc/nickel coated«will
C-INV V2. Cv Factor : 0.09 ~ 0.73 Orifice : to in. (2mm to 6.4mm) U-PRO fittings Inc.
C-INV-0911-V2 Cv Factor : 0.09 ~ : 0.079 to 0.252 (2 to.4) U-PRO fittings Inc. Materials of Construction 4 3 2 1 Stem of Tip U-PRO integral needle valves are offer ith variety of Stem tips. Starderds are
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
STAUFF. Hydraulic Accessories. Local solutions for individual customers worldwide
STUFF Hydraulic ccessories Local solutions for individual customers worldwide Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 58777 Werdohl Germany Im Ehrenfeld 4 58791 Werdohl Germany Telephone: + 49 2392
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
You ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
INSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
Solution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof The Best Partner Flow & Control Solution Partner for Value Creation Ball Valves SBV SBV30 SBV60 SFBV60 SBVSeries For
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold
Integral-Bonnet Needle Valves
Integral-Bonnet Needle ValvesO, 1, 18, 20, and 26 Series 1 www.swagelok.com Integral-Bonnet Needle Valves O, 1, 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001 Introduction Parker VQ Series Needle Valves are the right combination of performance and value for manual or pneumatic onoff control in moderate
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the
NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
Block & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
INSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
metering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
Back Pressure Regulators
Back Pressure Regulators BPR-1, BPR- and BPR-3 Series www.fitokgroup.com 01 Back Pressure Regulators Back Pressure Regulators BPR-1 Series Back Pressure Diaphragm Regulators Features Metal-to-metal seal
High-Pressure Needle Valves
www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design
Instrumentation Products. Mini Valves and Rupture Disc Holders
Instrumentation Products Mini Valves and Rupture Disc Holders General Features I Mini Valves and Rupture Disc Holders Introduction Rugged Design for long term performance in the most demanding environmental
Installation Instructions
c Installation Instructions Flow Control s This sheet provides installation instructions and replacement parts list for Cascade Flow Control s. The valve reduces the flow rate to the attachment and returns
Installation Instructions
c Installation Instructions K-Series Fork Positioner Termination Kits 0, 0, 0, 000 and 0 This sheet provides installation instructions and replacement parts list for Cascade High Termination Kits 0, 0,
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
GENERAL GAS INSTALLATION LABORATORY SOLUTIONS
GENERAL GAS INSTALLATION LABORATORY SOLUTIONS 1 2 1 3 2 1 PRECISE RESULTS NEED PRECISE EQUIPMENT The complete range of specialty gas equipment for safety, control and productivity from source to process.
Metering Valves Catalog 4170-MV December 2010
Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering
Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
INSTALLATION GUIDE. Safe Parking. Innovative Vehicle Solutions
INSTALLATION GUIDE Safe Parking Innovative Vehicle Solutions TEM Safe Parking Installation Table of contents Use 3 Method of Operation 3 Fitting guidelines 4 Maintenance 4 Technical data 5 Versions 5 Check
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by t
Relief Valves (RL4 Series) Catalog 411-RL Revised, July 2001 RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted
Be llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,
Gauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443
Gauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GVH, GR Series 2-valve, 3-valve and 5-valve Manifold Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 5, 6369 Offenbach am Main, Germany Tel.: +49
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
Instrument Manifolds. High Technology Valve & Fitting Series
Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing
ARTS MANUAL. 70F Fork Clamp. Manual Number R-0. cascade. Cascade is a Registered Trademark of Cascade Corporation
P ARTS MANUAL 0F Fork Clamp Manual Number 89 R-0 cascade Cascade is a Registered Trademark of Cascade Corporation 80-0D-CFS-B About This Manual Introduction This Manual shows the parts breakdown for standard
Transit System Components L20700W 10/11. Bus Door Catalog
Transit System Components L20700W 10/11 Bus Door Catalog Greater Strength and Durability - The Haldex Touchbar Device - Designed for All Types of Pneumatic And Electric Bus Door Systems. The Haldex Touchbar
15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
One-Piece Ball Valves. VB2GB, VB23GB Series
One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.
Bellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
Installation Instructions
c Installation Instructions C-Series Integral Sideshifter & K-Series Fork Positioner Installation Kits for Toyota Masts This sheet provides installation instructions for Cascade Installation Kits. Each
Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
Parts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A011 R2 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
Parts Manual. cascade. Single-Double Pallet Handler. Model 50D-ES-012. Serial Number
c Parts Manual Model Single-Double Pallet Handler Serial Number 50D-ES-02 To Order Parts call: 888-227-22, Fax: 888-29-024 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Safety Decals
10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
Parts Manual. cascade. corporation. Model. 120H Tower Roll Clamp 120H Catalog Number
c Parts Manual Model Catalog Number 0H Tower Roll Clamp 0H74584 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 4 Decals 7 8 C-7554-4 RC80.ai 4 5 C-7554-5595-R