Instrument Manifolds. High Technology Valve & Fitting Series
|
|
- Bridget Rogers
- 5 years ago
- Views:
Transcription
1 Instrument Manifolds High Technology Valve & Fitting Series
2 Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle life. PTFE packing is below stem thread to isolate from process. Safety Back Seating seals in the fully open posion, providing a secondary stem seal. Variety of Stem Tips include nonrotating Vee Tip(Standard) Technical Data Packing and Body Material Packing Material PTFE Grafoil(Option) Orifice 3.2mm (0.125 in.) 6.4mm (0.250 in.) Features BodyMaterial SS 316 Temperature Rating 65 ~ 450 (53 ~ 232 ) 65 ~ 1200 (53 ~ 648 ) 2Valve Manifolds Block, Bleed Valve 5Valve Manifolds Equalizer, Bleed Valve 3Valve Manifolds Block, Equalizer Valve 5Valve Manifolds Block Valve Testing Each valve on every manifold is factory tested with nitrogen gas. The test is performed to a maximum allowable leak rate of 0.1scc/min. Pressure (37 ) 6000 PSIG 2,3,and 5valves Instrument manifolds valves. Pressure Rating up to 6000psig 100 (37 ) Temperature up to 1200 (648 ) with optional Grafoil packing All 316 stainless steel construction with PTFE packing. PressureTemperature Rating Body Material SS 316 Packing Material PTFE Grafoil Temperature( ) Working Pressure psig(bar) 65 (53) to 100(37) 200 (93) 250 (121) 300 (148) 350 (176) 400 (204) 450 (232) 500 (260) 550 (287) 600 (315) 650 (343) 700 (371) 750 (398) 800 (426) 850 (454) 900 (482) 950 (510) 1000 (537) 1050 (565) 1100 (593) 1150 (621) 1200 (648) 6000 (413) 5160 (355) 4910 (338) 4660 (321) 4470 (307) 4280 (294) 4130 (284) 6000 (413) 5160 (355) 4910 (338) 4660 (321) 4470 (307) 4280 (294) 4130 (284) 3980 (274) 3870 (266) 3760 (259) 3700 (254) 3600 (248) 3520 (242) 3460 (235) 3380 (232) 3280 (225) 3220 (221) 3030 (208) 3000 (206) 2685 (184) 2285 (157) 1715 (118) * Note 450 (232 ) with standard PTFE packing (648 ) with Optional Grafoil packing. Instrument Manifolds 2
3 Instrument Manifold Series www. superlok.com 2Valve Manifolds Horizontal Style(Remote Mounting) Material of Construction Body Lock Nut Stem Handle Vee Tip Set Screw Bonnet Locking Plate Packing PTFE Grafoil(optional) Wrench Bolt Spring Washer Packing Bolt Process Instrument Bleed A B C D E F G SM2VF8N 1/2" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Instrument Manifold 3
4 Instrument Manifolds 2Valve Manifolds Horizontal Single Flange Style (Direct Mounting) Process Instrument Bleed A B C D E F G H SM2VFF8N 1/2" Female NPT Flange(MSS) 1/4" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Vertical Style (Direct Mounting) Process Instrument Bleed A B C D E F G SM2VDF8N 1/2" Female NPT Flange(MSS) 1/4" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Instrument Manifolds 4
5 Instrument Manifold Series www. superlok.com 3Valve Manifolds Horizontal Style(Remote Mounting) Material of Construction Body Packing Bolt Stem Lock Nut Vee Tip Stop Pin Bonnet Handle Packing PTFE Grafoil(optional) Set Screw Process Instrument A B C D E F G H SM3VF8N 1/2" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Instrument Manifold 5
6 Instrument Manifolds 3Valve Manifolds Horizontal Single Flange Style (Direct Mounting) Process Instrument A B C D E F G H SM3VFF8N 1/2" Female NPT Flange(MSS) * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Vertical Style (Direct Mounting) Process Instrument A B C D E F G H SM3VDF8N 1/2" Female NPT Flange(MSS) * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Instrument Manifolds 6
7 Instrument Manifold Series www. superlok.com 5Valve Manifolds Horizontal Style(Remote Mounting) Material of Construction Body Lock Nut Stem Stop Pin Vee Tip Handle Bonnet Set Screw Packing PTFE Grafoil(optional) Locking Plate Wrench Bolt Packing Bolt Spring Washer Process Instrument Bleed A B C D E F G H SM5VF8N 1/2" Female NPT 1/4" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Instrument Manifold 7
8 Instrument Manifold Series www. superlok.com 5Valve Manifolds Horizontal Single Flange Style (Direct Mounting) Process Instrument Bleed A B C D E F G H SM5VFF8N 1/2" Female NPT Flange(MSS) 1/4" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Vertical Style (Direct Mounting) Process Instrument Bleed A B C D E F G H I SM5VDF8N 1/2" Female NPT Flange(MSS) 1/4" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Instrument Manifold 8
9 Instrument Manifold Series www. superlok.com Gauge / Root Valve SGBV(Gauge Valve) SGRV(Gauge Root Valve) Dimensions (mm) Process Instrument A B C D E F SGBVMF8N SGRVMF8N 1/2" Male NPT 1/2" Male NPT 1/2" Female NPT 1/2" Female NPT SGBVMF12N8N SGRVMF12N8N 3/4" Male NPT 3/4" Male NPT 1/2" Female NPT 1/2" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. SGBV 2 Gauge 2Valve Dimensions (mm) Process Instrument A B C D E SGBV2MF8N 1/2" Male NPT 1/2" Female NPT * To order a manifold with optional Grafoil packing, addg to the manifold ordering number. Instrument Manifold 9
10 Valve Series Ball Valves Integral Bonnet Needle Valves Union Bonnet Needle Valves Check Valves High Pressure Check Valves High Pressure Needle Valves Plug Valves Manifold Valves Vacuum Clamp Regulators Flexible Hoses Double Block & Bleed Valves SwingOut Ball Valves Toggle Valves Bleed & Purge Valves Quick Connectors High Pressure Ball Valves Hydraulic Ball Valves Trunnion Ball Valves Rising Plug Valves Relief Valves Cryogenic Needle Valves Cryogenic Ball Valves Fitting Series Tube Fittings Thread Fittings Forged Fittings Bite Type Tube Fittings (DIN2353) Bite Type Tube Fittings (JIS B2351) 37 Flared Tube Fittings (SAE J514) ORing Face Seal Fittings Hose Connectors & PushOn Hose Fittings Electronics MCPD(Molded Case Power Distributor) 211, Bukjeongdong Yangsansi Gyeongsangnamdo Korea Tel Fax 경상남도양산시북정동 211 전화 : 팩스 : superlok@superlok.com BMT CMV2 ( )
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
More informationManifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
More informationInstrument Thread Fittings. High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More informationInstrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
More informationInstrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
More informationSwing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
More informationInstrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationINSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
More informationINSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
More informationINSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationAcquired the Nippon Kaiji Kyokai Certificate for Approval Mechanical Joint.
Certification ASME (American Society of Mechanical Engineers) N Stamp ABS (American Bureau of Shipping) Lloyd (Lloyd s Register of Shipping) DNV (Det Norske Verita/Norwegian Assoc.)
More informationHIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
More informationINSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
More informationHIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
More informationInstrumentation Manifold Valves
www.korlok.com Instrumentation Manifold s 1 2 3 4 11 12 Manifold s 2- Manifold 2- Manifold Kor-Lok 2- Manifolds offer safety and reliability in a general purpose design. The simple 2- configuration allows
More informationProfile & History. Certification 1988 ~ ~ ~ ~
Profile & History 1988 ~ 2003 2004 ~ 2006 2007 ~ 2008 2009 ~ Established GyeongPoong Machinery Co. Changed the Company name to BMT Co., Ltd Designated as a Clean Company by Ministry of Labor Introduced
More informationInstrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds
www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to
More informationINSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
More informationSolution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold
More informationANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
More informationEngineered for control from tap to transmitter
Engineered for control from tap to transmitter When it comes to Process Instrumentation, one company stands behind you to minimize risks and maximize productivity CONTINUE Going from tap to transmitter
More informationInstrument Manifold Systems
www.swagelok.com Instrument Manifold Systems Instrument, Direct, and Remote-Mount Manifolds and Modular Systems V, VB, and VL series 2-, 3-, and 5- instrument manifolds VE series 2-, 3-, and 5- direct-mount
More informationFlow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
More informationNeedle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
More informationLocked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationManifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
More informationCost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications
PRODUCT SELECTION GUIDE Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications...Make the leak free connections with Sealexcel products at competitive
More informationIntegral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
More informationInstrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
More information120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
More informationSWB 310 SERIES SWING - OUT BALL VALVES
SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable
More informationC-INV V2. Cv Factor : 0.09 ~ 0.73 Orifice : to in. (2mm to 6.4mm) U-PRO fittings Inc.
C-INV-0911-V2 Cv Factor : 0.09 ~ : 0.079 to 0.252 (2 to.4) U-PRO fittings Inc. Materials of Construction 4 3 2 1 Stem of Tip U-PRO integral needle valves are offer ith variety of Stem tips. Starderds are
More informationUnion Bonnet Needle Valves
Union Bonnet Needle Valves SUNV Series Features Panel mountable Nonrotating stem tips Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve is tested at
More informationinstrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
More informationMANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
More informationManifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
More informationHigh-Pressure Needle Valves
www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design
More informationIY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant
www.ihsungtech.co.kr IY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant Lead the Innovation, Since 1993 Always Together, Always Success Company Profile
More informationHexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
More informationScrewed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
More informationpressure Body and Setting wrenching Orifice Pipe-Away Pipe-Away Style Size Inlet Valve Range Height Hex Size Adapter Outlet
213 Valves Relief valves WATER & POOL HEATERS rego relief VALVES For Gas & Cryogenic Systems 9400 Series Brass or Stainless Steel, Non-ASME All valves are cleaned and packaged for oxygen service per CGA
More informationspecification DAtA V R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500
specification DAtA V500-2016-R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500 Series V500 PILOT OPERATED TANK BLANKET VALVE, PRESSURE REGULATING VALVE contents Application, Features,
More information5030/5130. Hard Seat & Soft Seat/Tip. Flow Schematic. Manifold Valves, 5-Valve Natural Gas
Manifold Valves, 5-Valve Natural Gas Hard Seat & Soft Seat/Tip 5030/5130 Flare Pattern option Flow Schematic Designed for use with differential pressure transmitters incorporating two gas applications
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationSAE 37 Flared Tube Fittings
SAE 7 Flared Tube Fittings 7 Flared Tube SAE J5 MEETS SAE STANAR J5 If required, see SAE Standard J5 for a complete list of dimensions. NPT Tapered Pipe Treads meet te requirements of ASME/ANSIB.I.0..
More informationGauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443
More informationSCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
More informationTrunnion Ball Valves. TB Series. Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in.
Trunnion Ball Valves Series Working Pressure: up to 10,000 psig (689 bar) Temperature Range: -40 to 450 F (-40 to 3 C) Flow Coefficient: up to 1.6 End Connections: 1/8 to 3/4 in. (6 to 1 mm) -way and 3-way
More informationV16 Series Severe Service Union Bonnet Valves Pressure Rating up to 6000psig Catalog No. V16-2 Sept. 2004
R V16 Series Severe Service Union Bonnet Valves Pressure Rating up to 6000psig Catalog No. V162 Sept. 2004 Features Pressure up to 6000 psig (413 bar) @ 37C (100F). High Temperatures up to 300C (572F)
More informationANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
More informationTrunnion Ball Valves. TB Series. Wide variety of end connection types and sizes. Flow Coefficient: up to 1.6
Trunnion Ball Valves Series Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in. (6 to 1 mm) Temperature Range: -40 to 450 F (-40 to 3 C) -way and 3-way valves Flow Coefficient:
More informationOne-Piece Encapsulated Ball Valves
One-Piece Encapsulated Ball Valves EB Series Working Pressure: up to 3000 psig (206 bar) End Connections: 1/16 to 3/4 in. (3 to 12 mm) Temperature Range: -65 to 300 F (-53 to 148 C) 2-way, Angle and 3-way
More informationVM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed Catalog No. VM-3 July 2015 VMD Series Direct Mount Manifolds EN 61518: IEC 61518 standard is
More informationFigure 1: HB Series Ball Valve Cross Sectional View DISASSEMBLY WARNING: MAKE CERTAIN THE SYSTEM IN WHICH THE VALVE IS INSTALLLED IS EXHAUSTED OF ALL
Maintenance Instructions MI-142 Revision - HB Series Ball Valve MAXIMUM ALLOWABLE WORKING PRESSURES Table 1 Maximum Allowable Working Pressure versus Seat Material Seat Stainless Steel Material Body Material
More informationGeneral Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
More informationVALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
More informationAnderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
More informationAnderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
More informationOil and Gas Products Pressures to 30,000 psi
Oil and Gas Products MAXIMATOR has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability. Oil
More informationANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
More informationValves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
More informationPurge Adapters. The Solution to Isolate the Process. Flow, Level and Pressure Applications: Product Features: Contact Information:
Purge Adapters The Solution to Isolate the Process Flow, Level and Pressure Applications: Parker s Purge Adapters are used where the sensing lines need a constant purge to prevent plugging, and where the
More informationManifold Valves. Important!
Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating
More informationModular Instrumentation System
www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure
More informationHOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
More informationCheck valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More information413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F
Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections
More informationNatural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
More informationBALL VALVES - VB3 Series
1 Piece Integral Stem Materials of Construction No. Description Body Material 1 Handle Directional Handle Materials Nylon Panel Mountable Nut Various End Connections & Sizes Compact 1 Piece Body BALL VALVES
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationProducts for the Oil & Gas Industry
Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing
More informationSolution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
More informationNeedle Valves Mini, Hard Seat
Needle Valves Mini, Hard Seat 100 SERIES Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
More informationStatic Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
More informationThe model M Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location.
200 Series M-220 & M-222 2-Valve Manifolds The model M-220 2-Valve Manifold is designed for remote mounting of a static or gauge transmitter. This design permits the user to mount each unit separately
More informationStatic Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
More informationGauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GVH, GR Series 2-valve, 3-valve and 5-valve Manifold Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 5, 6369 Offenbach am Main, Germany Tel.: +49
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationWWW.MAKO-RODUCTS.NET 03 07 10 19 Diaphragm Valve 12 DV1 Series 13 DV1 Series 14 BDV1 Series 15 BDV1 Series 16 HDV1 Series Bellows Valve 17 BV1 Series 18 BV1 Series 19 BV2 Series 20 BV2 Series 21 BV3 Series
More informationNeedle Valves Mini, Hard Seat
Needle Valves Mini, Hard Seat 100 Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
More informationGauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More information"S" Series Needle/Gauge Valves
"S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads
More informationMulti-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
More informationVN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
More informationKerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
More information.187" Orifice PART NUMBER DESCRIPTION BONNET MATERIAL SEAT STEM SEAL
Options Bonnet Lock Plate Anti-Tamper Bonnet The Bonnet Lock Plate provides a more positive bonnet-locking device than the standard roll pin. The Anti-Tamper Bonnet Handle allows the bonnet stem to be
More informationRecognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 Quality Service Experience www.mac-weld.com CONTENTS Introduction Page 1-2 Needle Valves Page 3-6 Gauge Valves Page
More informationcondensed catalog HOKE Condensed Catalog Index
HOKE Condensed Catalog Index Needle Valves 1 Metering Valves 3 Ball Valves 4 Actuated Ball Valve Packages 7 Plug Valves 8 Fluid Control Components 9 Packless Valves 11 Manifolds 13 Sampling Cylinders 14
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationFluid Distribution Header
Fluid Distribution Header Application Guide A Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance. Versatile manifold
More informationNeedle Valves B
Subsea Needle Valves Description Detail MAWP Orifice CV Barrior Body Stem O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem B-4957-01 Sub-Sea Needle Valve -way
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,
More informationContents. General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts
Contents General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts Manifolds 4 Ordering Tree 5 Pressure vs. Temperature Ratings 6 5-Valve Manifold Overview 8 5-Valve Manifold
More information