Manifold Valves. Important!
|
|
|
- Daniela Miles
- 5 years ago
- Views:
Transcription
1
2 Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating tip valves. The Manifold Valves can be provided in Carbon teel, tainless teel, Hastelloy, Carbon teel*, Monel* and uper Duplex*, depending on the customer specification. Gaskets are provided in PTFE or Grafoil (optional), and bolts in Carbon teel or tainless teel. Also, they are available for vacuum services, NACE MR applications and for oxygen use, which requires special cleaning conditions. All of the Manifold Valves have tracking codes graved in their housing in accordance with raw material certifications. These certifications comply with item 3.1.B of the EN10204 standard. Pressure tests are present in 100% of the production and they are in compliance with the API598 standard. mar Manifolds are produced under certified quality system in compliance with IO standard. Other features: Exclusive sealing ring between bonnet and manifold housing. Easy maintenance system for eventual leak through the spindle. A secondary sealing system (backseat) avoids the valve blowout, also providing an additional sealing for the manifold. Anatomic T-bar, without live corners and with low torque. Exclusive design, which allows reduced weight and dimensions. High-precision machine-made gaskets and self-adjustable rings work together dynamically, allowing leak free operations, even under pressure changes. * ee time of delivery with your representative. 7 8 For manifolds assembled to pressure transmitters, the temperature limits that must be obeyed are the ones specified on the transmitter catalog/ manual. Item Description 01 Non-rotating tip 02 pindle 03 Bonnet / Castle sealing 04 pindle s sealing 05 Housing 06 Pusher 07 T-bar 08 Headless Allen 09 Dust cap 10 Lock nut 11 Label describing functionality 12 Protection washer 13 Bonnet Important! 14 Process thread bonnet
3 BVT BLOCK VALVE ( THREAD / THREAD) Material C Plated Carbon teel (1) 316L tainless teel D uper Duplex (1) Process Connection Thread 1 ½" NPT T ½" BP Instrument Type Connection M F Female / Male Female / Female ealing Material Pressure Class Drain 0 ix-sided bolt for vent (1/4" NPT) 1 ix-sided bolt with bleed (1/4" NPT) pecial Cleaning our Fluids BVT - 1 M - T 0 / / For block and drain operations assembled to manometers, gage and absolute pressure transmitters. In normal operation mode, the IOLATE valve remains open. In order to perform the ZERO calibration, this block valve must be closed, and the six-sided drain bolt (or the optional bleed connected to it) must be opened to remove the process pressure. BVT (Male / Female) 104 (4.1) 85 (3.3) Ø41.3 (1.6) BVT (Female / Female) 104 (4.1) 75 (3.0) Ø41.3 (1.6) (1) ee delivery time with your representative.
4 BVF BLOCK VALVE (THREAD / THREAD) Material C Plated Carbon teel (1) 316L tainless teel D uper Duplex (1) Process Connection Thread 1 ½" NPT T ½" BP Instrument Type Connection 1 Flange ealing Material Pressure Class Drain 0 ix-sided bolt for vent (1/4" NPT) 1 ix-sided bolt with bleed (1/4" NPT) pecial Cleaning our Fluids BVF T 0 / / For block and drain operations assembled to gage and absolute pressure transmitters. Adapters between this manifold and the transmitter are not required. In normal operation mode, the IOLATE valve remains open. In order to perform the ZERO calibration, this block valve must be closed, and the six-sided drain bolt (or the optional bleed connected to it) must be opened to remove the process pressure. BVF (Flange / Thread) 104 (4.1) Ø12 (0.5) (4.8) 42.3 (1.7) (1) ee delivery time with your representative.
5 MVT 2-WAY MANIFOLD VALVE ( THREAD / THREAD) Material C Plated Carbon teel (1) 316L tainless teel D uper Duplex (1) Process Connection Thread 1 ½" NPT T ½" BP M F Instrument Type Connection Female / Male Female / Female ealing Material Pressure Class Drain 0 ix-sided bolt for vent (1/4" NPT) 1 ix-sided bolt with bleed (1/4" NPT) pecial Cleaning our Fluids MVT - 1 M - T 0 / / For block and drain operations assembled to gage and absolute pressure transmitters. In normal operation mode, the IOLATE valve remains open. In order to perform the ZERO calibration, this block valve must be closed, and the valve and then the six-sided drain bolt (or the optional bleed connected to it) must be opened to remove the process pressure. MVT (Male / Female) Ø41.3 (1.6) 166 (6.5) 85 (3.3) MVT (Female / Female) 166 (6.5) 41.3 (1.6) 75 (3.0) (1) ee delivery time with your representative.
6 MVF 2-WAY MANIFOLD VALVE (FLANGE / THREAD) Material C Plated Carbon teel (1) 316L tainless teel D uper Duplex (1) Process Connection Thread 1 ½" NPT T ½" BP 1 Flange Instrument Type Connection ealing Material Pressure Class Drain 0 ix-sided bolt for vent (1/4" NPT) 1 ix-sided bolt with bleed (1/4" NPT) pecial Cleaning our Fluids MVF T 0 / / For block and drain operations assembled to gage and absolute pressure transmitters. Adapters between this manifold and the transmitter are not required. In normal operation mode, the IOLATE valve remains open. In order to perform the ZERO calibration, this block valve must be closed. The valve and the six-sided drain bolt (or the optional bleed connected to it) must be opened to remove the process pressure. MVF (Flange / Thread) 166 (6.5) (4.8) 41.3 (1.6) (1) ee delivery time with your representative.
7 MVY3 3-WAY Y TYPE MANIFOLD VALVE (FLANGE / THREAD or FLANGE / FLANGE) Material C Plated Carbon teel (1) 316 tainless teel D uper Duplex (1) Process Type Connection 0 Flange 1 ½ NPT T ½ BP 1 Flange Instrument Type Connection ealing Material Pressure Class Distance Between Centers D0 54 mm / 2.1 in (For mar Pressure Transmitters: Ranges 0, 1, 2, 3 and the Q Option of Range 4) D4 56 mm / 2.2 in (For mar Pressure Transmitters: Range 4 - Except the Q Option ) D mm / 2.3 in (For mar Pressure Transmitters: Range 5) pecial Cleaning our Fluids MVY T D0 / / This valve is required in differential pressure transmitter assembly. It has two block valves (IOLATE) and one for equalization (EQUALIZE). In normal operation mode, block valves must be opened and the equalization valve remains closed. In order to perform the ZERO calibration, one of the block valves must be closed, and the EQUALIZE valve is opened, thus the pressure on both sides of the instrument becomes the same. To remove the valve from the instrument, the two IOLATE valves must remain closed. To assemble it back, these two IOLATE valves must be opened completely, and thereupon the equalization is closed to establish a pressure difference on the both sides. Connections to the process can be threaded or flanged. BYPA MVY3 (Flange / Thread) 123 (4.8) (Flange / Flange) 224 (8.8) 33 (1.3) (1) ee delivery time with your representative. 7
8 MVY5 5-WAY Y TYPE MANIFOLD VALVE (FLANGE / THREAD or FLANGE / FLANGE) Material C Plated Carbon teel (1) 316 tainless teel D uper Duplex (1) Process Type Connection 0 Flange 1 ½ NPT T ½ BP 1 Flange Instrument Type Connection ealing Material Pressure Class Drain Operation 0 ix-sided bolt (1/4 NPT) 1 ix-sided bolt with bleed (1/4 NPT) Distance Between Centers D0 54 mm / 2.1 in (For mar Pressure Transmitters: Ranges 0, 1, 2, 3 and the Q Option of Range 4) D4 56 mm / 2.2 in (For mar Pressure Transmitters: Range 4 - Except the Q Option ) D mm / 2.3 in (For mar Pressure Transmitters: Range 5) pecial Cleaning our Fluids MVY T 0 - D0 / / This valve is required in differential pressure transmitter assembly. It has two block valves (IOLATE), two drain valves (), and one for equalization (EQUALIZE). The principle of these valves is the same applied to the 3-way manifolds, except for two drain valves in bottom position. In normal operation mode, block valves are opened and both equalization and vent valves remains closed. In order to perform the ZERO calibration, one of the block valves and the vent valves must be closed. Then, the EQUALIZE valve is opened, thus the pressure on both sides of the instrument becomes the same. To purge the process or to generate pressure to calibrate the transmitter (by using a pressure generator), ducts can be installed in place of the six-sided bolts, and the valves are used to control the operation. CALIBRATION BYPA CALIBRATION MVY5 (Flange / Flange) 34 (1.3) 113 (4.4) 148 (5.8) (Flange / Thread) 252 (9.9) (1) ee delivery time with your representative. 8
9 Accessories COMPLEMENT Option: (½ NPT Thread) Monel Code: Option: pacers kit for 5-Way Manifold (MVY5) Code: Options: (½ NPT Thread) Plated Carbon teel - Code tainless teel - Code Hastelloy C276 - Code PARE PART Plug (1/4 NPT) Option: 316 tainless teel - Code Plug (1/4 NPT) Options: Hastelloy C276 - Code Monel Code: Drain Valve (1/4 NPT) Option: 316 tainless teel - Code Drain Valve (1/4 NPT) Options: Hastelloy C276 - Code Monel Code: WEIGHT Model BVT (M x F) BVT (F x F) BVF (Fl x Th) Weight (kg / pounds) 0.76 / / / 1.78 Model MVT (M x F) MVT (F x F) MVT (Fl x Th) Weight (kg / pounds) 0.85 / / / 2.33 Model MVY3 (Fl x Th) MVY3 (Fl x Fl) MVY5 (Fl x Th) MVY5 (Fl x Fl) Weight (kg / pounds) 1.48 / / / /
10 Mensagem smar pecifications and information are subject to change without notice. Up-to-date address information is available on our website. web: Copyright mar International - all rights reserved. - March/2008
Block-and-bleed valve 2-valve manifold Models IV20 and IV21
Valves and protective devices Block-and-bleed valve 2-valve manifold Models IV20 and IV21 WIKA data sheet AC 09.19 Applications Shut off and vent pressure measuring instruments For gaseous and liquid aggressive
Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51
Valves and protective devices Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51 WIKA data sheet AC 09.23 Applications Shut-off, pressure
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
General Specifications
General Specifications GS 22B01C05-00EN-A C13ST Manifolds for Traditional Mount Gauge and Absolute Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-2 2-Valve manifolds are
INTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
General Specifications
General Specifications GS 22B01C06-01EN-A C13ST Manifolds for Traditional Mount Differential Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-3 and C13ST-5 manifolds are
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Monoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
HOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
Page 1 Worldwide Rev e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
Sami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI /
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
Anderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
5030/5130. Hard Seat & Soft Seat/Tip. Flow Schematic. Manifold Valves, 5-Valve Natural Gas
Manifold Valves, 5-Valve Natural Gas Hard Seat & Soft Seat/Tip 5030/5130 Flare Pattern option Flow Schematic Designed for use with differential pressure transmitters incorporating two gas applications
Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold
Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Anderson Greenwood M1/M110 Differential Pressure Manifolds
A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1
CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 PRODUCTS INDEX 4
Fluid control division MANIFOLD CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 INDEX 4 ACCESSORIES MOUNTING BRACKETS 35 OVAL FLANGES 35 BLEED 35 CONDENSING POTS 36 SYPHONS 36 AIR FEED HEADERS
ABB measurement & analytics data sheet. Model M26 Manifold line for 266 pressure transmitters
ABB measurement & analytics data sheet Model M26 Manifold line for 266 pressure transmitters Measurement made easy Engineered solutions for all applications 2 M 26 M a n ifol d li n e for 26 6 p r ess
Instrumentation Manifolds Traditional C13WT series. For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters
Instrumentation Manifolds Traditional C13WT series For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters Introduction About Yokogawa and WIKA About the catalogue Yokogawa and WIKA have
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
Pressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F
Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
Instrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
Modular Instrumentation System
www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure
Static Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
Kerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds PT7 PTM Product Overview The PT Two-Valve Calibration Manifolds are used on static pressure transmitters, switches or gauges. The shutoff valve,
Instrument Manifold Systems
www.swagelok.com Instrument Manifold Systems Instrument, Direct, and Remote-Mount Manifolds and Modular Systems V, VB, and VL series 2-, 3-, and 5- instrument manifolds VE series 2-, 3-, and 5- direct-mount
VALSTAR VALVE. The triple offset - metal Seated high-performance butterfly valve
. VALTAR. VALVE The triple offset - metal eated high-performance butterfly valve 3rd Offset 2nd Offset VALTAR VALVE KEY INFORMATION High performance levels in Control or On/Off service pecific shape of
Anderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
Valves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
Ball Valves. Features
Technical Information General Description eries BV3H and BV4H are true 3-way and 4-way high pressure valves, incorporating many of the advanced features of the 2-way product. These products come in steel
PRECISIONISO 9001:2008
SUSTECH PRECISIONISO 9001:2008 Direct Mount Manifolds L Series Rated up to 10 000 psi Compact design Ease of use www.sustech.com sales@sustech.com l +27 11 452-9545 Contents Manifolds and Accessories Manifold
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
NEEDLE VALVE GAUGE VALVE VALVE MANIFOLD BALL VALVE ACCESSORIES
NEEDLE VLVE GUGE VLVE VLVE MNIFOLD BLL VLVE CCESSORIES Index Introduction ----------------------------- Valve Manifold VM0 ---------- Product Feature ----------------------- Valve Manifold VM0 ----------6
Block & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
Instrumentation Products Monoflanges & VariAS-Blocks
Instrumentation Products Monoflanges & VariAS-Blocks Introduction Introduction The AS-Schneider Monoflanges and VariAS- Blocks are designed to overcome the problems of traditional assemblies on primary
Instrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
Double Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003
Double Block and Bleed Manifolds and Flanged Products Catalog 4190-FP October 2003 Contents Page 3 Introduction. Page 4/5 Application illustrations. Page 6 Ball valve specification. Page 7 Outside screw
General Specifications
General Specifications Manifolds for DPHarp EJA and EJX Pressure and Differential Pressure Transmitters Yokogawa Europe bv has included Sami Instruments manifolds in his DPHarp pressure and differential
Distributed By: M&M Control Service, Inc
The KM1 is a 3-valve manifold designed for applications where direct mounting to an instrument is impractical or undesirable. This style manifold is mounted to the lines from the instrument and signal
General Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
Anderson Greenwood Instrumentation Products - Manifolds and Accessories
Anderson Greenwood Instrumentation Products - Manifolds and Accessories Total Flow Control Solutions Flow, Static Pressure and Liquid Level Manifolds Flow Control ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS
P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
Overview Brochure. Multi Instruments, Edisonweg 1, 4207HE Gorinchem, The Netherlands
Overview Brochure Contact details Multi Instruments: Phone: +31 (0)183 62 88 88 Fax.: +31 (0)183 62 81 82 E-mail: Instrumentation@multi- Homepage: www.multi- http://www.multi http://www.multi-- MI/AP revision
Overview Replacement Meterbody and Heads for Model STD 110
ST 3000 Smart Transmitter, Release 300 and Smart Field Communicator Model STS03 Transmitter Model STD0 34-ST-99-8 04/03 Addendum (to User s Manual 34-ST-5-4B) Overview Replacement Meterbody and Heads for
INSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds
www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to
"S" Series Needle/Gauge Valves
"S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Instrument Manifolds. High Technology Valve & Fitting Series
Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing
Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
Instrumentation Products. E Series Valves and Manifolds
Instrumentation Products E Series Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation Valves
Monoblock DBB. Page 1
Monoblock DBB Page 1 Page 2 Ball bore size 10 mm Ball and Bleeder Bleeder Antitamper ( optional ) Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
Angle Type Needle Valves - Miniature Series
Angle Type Needle Valves - Miniature Series Mod. 020-021 - 022 Applications: Pressure instruments isolation (gauges, switches, transmitters, etc.) Connections: Threaded to ANSI-ASME B1.20.1, ISO 228 -
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed Catalog No. VM-3 July 2015 VMD Series Direct Mount Manifolds EN 61518: IEC 61518 standard is
Rosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated
Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
INSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
Manifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
Instrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
Instrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve posioned in the flow stream to allow or prevent the flow (ball or p); 2. Stem: part which connects the obturator
)SLIM LINE) MONOFLANGE VALVES
)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are
Rosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated
Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA WHAT IS A TORFLOW? TheTORFLOW is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement.
Ball Valves PSI
6.000-0 PSI Ball Valve Components 10 9 7 11 8 6 2 1 3 4 5 1 BILL OF MATERIALS 1 CLOSE FITTING AISI 316L 2 SEAL RINGS PTFE 3 BALL SEATS PEEK 4 VALVE BODY AISI 316L 5 BALL AISI 316L 6 PIN A4-70 7 GASKET
ANDERSON GREENWOOD H7/H71 HAND VALVES
3 /16 (4.8 mm) orifice hard-seated hand valves for pressures to 6000 and 10000 psig (414 and 689 barg) FEATURES H7 GENERAL APPLICATION H7 series valves are designed for safe, repetitive bubble-tight closure,
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
Recognized globally for our quality, service and the ability to deliver! ISO 9001:
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 www.mac-weld.com MACHINING LTD. CONTENTS Introduction Page 1-2 2 Valve Manifolds Page 3-4 3 Valve Manifolds Page 5-7
The model M Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location.
200 Series M-220 & M-222 2-Valve Manifolds The model M-220 2-Valve Manifold is designed for remote mounting of a static or gauge transmitter. This design permits the user to mount each unit separately
Rosemount 3051S Electronic Remote Sensor (ERS) System
Rosemount 3051S Electronic Remote Sensor (ERS) System The Rosemount 3051S ERS System is a flexible, 2-wire 4-20 ma ART architecture that calculates differential pressure (DP) electronically using two pressure
P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold