|
|
|
- Amanda Ball
- 5 years ago
- Views:
Transcription
1 Sami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1
2 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI / accessories Manifolds Page 12 Accessories Page 24 ACCESSORI / accessories Special ACCESSORI items / accessories Page 25 Page 2
3 Introduction Sami Instruments Thanks to the many years of experience in the instrument field, Sami Instrument offers a wide selection of valves and manifolds to meet the needs of industrial applications. Now a unique catalogue offers you an easy system of selecting and choosing the proper product for your plant application. Besides valve and manifold production, Sami instruments offers a large range of other products, such as Monoflanges and block and bleed valves that are widely used in the Oil &Gas sectors, Off shore and plant for energy production. The reduction of CONNECTION POINTS dramatically reduces the risk of losses and installation costs. Markets Oil & Gas Offshore platform Chemical Petro-chemical Refining Process pwoer industry Page 3
4 Standard Features Needle Valve MATERIALS TABLE FIXING AISI TEE BAR AISI GLAND NUT AISI 316L 4 STEM AISI 316L 5 LOCK NUT AISI 316L 6 CAP HYTREL 7 BONNET AISI 316L 8 RING AISI 316L 9 METAL SEAL AISI 316L 10 PACKING PTFE / GRAPHOIL 11 PLUG AISI 316L Pressure and Temperature Pressure psi ( bar ) 10,000 (690) 8,000 (552) 6,000 (414) 4,000 (276) 2,000 (138) 0 0 (32) 100 (212) 200 (392) 300 (572) Grafphoil packing PTFE packing PEEK packing 400 (752) Temperature C ( F ) 500 (932) Features Tee bar easy manoeuvrability with minimum effort PTFE packing standard, optional graphoil Stainless steel costruction as standard, optional: carbon steel LF2, Duplex, Super Duplex, Monel 400, Hastelloy C276, Inconel 625, Titanium, Incolloy 825 Coulor coded functional identification Externally adjustable gland Variety of end connections Dust cap to prevent ingress of contamination to operating thread Needle Valve with anti tamper bonnet This model of needle valve is normaly used to prevent the accidental operations and release of fluid through the vent port to atmosphere. For the valve to be functional the operator must obtain the separate key. Pressure ratings and options are exactly the same as the standard T-bar version. T-Bar handle locking Specification Pressure up to 10,000 Psi ( 690 Bar ) Temperature rating PTFE packing - from 54 C to C ( -129 F / F ) Temperature rating GRAPHOIL packing - from - 60 C to C ( -140 F / F) Standard seat diameter 4 mm Port size up to 3/4 pipe threaded as standard Standard S316L stainless steel; Page 4
5 Coding System VERSION Bar stock needle valves Two-valves manifolds Three-valve manifolds Four-valve manifolds Five-valve manifolds OUTLET A 1/8 A NPT B 1/4 B BSPP C 3/8 C BSPT D 1/2 D S.W. E 3/4 E B.W. F Ø * F O.D. G 1 H Std. Sami H Flang. I IEC 61518/A I M20 L Special M IEC 61518/B N X 1,5 INLET A 1/8 A NPT B 1/4 B BSPP C 3/8 C BSPT D 1/2 D S.W. E 3/4 E B.W. G 1 H Std. Sami H Flang. I IEC 61518/A I M20 L Special M IEC 61518/B N X 1,5 MATERIALS A Carbon Steel C50 B Aisi 316 L C Aisi 316 Ti D Duplex E Super Duplex F Monel 400 G Hastelloy C276 H Inconell 625 I Titanium L P22 M Brass N A350-LF2 O Incolloy PACKING A PTFE B Graphoil C O-ring Viton D O-ring Viton BONNET A Std Bonnet B Gas Solution A B C D RATING 800 PSI 3,000 PSI 6,000 PSI 10,000 PSI C Mini D O.S. & Y C B A B A B A A 1000CBABABAA Page 5
6 Coding System Gauge Valves Series Model 1000 Bar stock valves Female / Female 1050 Bar stock valves Female / Female with bleeder 1100 Bar stock valves Female / Female with 1/4" NPT drain 1150 Bar stock valves Male / Female 1200 Bar stock valves Male / Female with bleeder 1250 Bar stock valves Male / Female with 1/4" NPT drain 1300 Bar stock valves Male / Female multiport with three outlet 1350 Mignon valves bar stock Female / Female 1400 Pressure gauge needle bar stock valves Female / Female 1450 Pressure gauge needle bar stock valves Male / Female 1500 Gauge protector orizontal forged valves 1550 Bar stock valves Female / Female Bar stock valves Female / Female 90 with 1/4" NPT drain 1700 Differential gauge valves ( 37 mm ) 1750 Differential gauge valves ( 54 mm ) Two Valve Manifolds Series Model 2000 Two valve bar stock manifolds Male / Female 180 Mounting remote 2050 Two valve bar stock manifolds Female / Female 180 Mounting remote 2100 Two valve bar stock manifolds Male / Female 180 Direct mounting 2150 Two valve bar stock manifolds Female / Female 180 Direct mounting 2200 Two valve bar stock manifolds Male / Female 90 Mounting remote 2250 Two valve bar stock manifolds Female / Femal 90 Mounting remote 2300 Two valve bar stock manifolds Male / Female 90 Direct mounting 2350 Two valve bar stock manifolds Female / Female 90 Direct mounting 2400 Two valve forged manifolds Male / Female 180 Mounting remote 2450 Two valve forged manifolds Female / Female 180 Mounting remote 2500 Two valve forged manifolds Male / Female 180 Direct mounting 2550 Two valve forged manifolds Female / Female 180 Direct mounting 2600 Two valve forged manifolds Male / Female 90 Mounting remote 2650 Two valve forged manifolds Female / Female 90 Mounting remote 2700 Two valve forged manifolds Male / Female 90 Direct mounting 2750 Two valve forged manifolds Female / Female 90 Direct mounting Page 6
7 Coding System Series Model Three Valve Manifolds 3000 Three valve bar stock manifolds 180 Mounting remote 3050 Three valve bar stock manifolds 180 Direct mounting 3100 Three valve bar stock manifolds 180 Mounting remote with 1/4" NPT drain 3150 Three valve bar stock manifolds 180 Direct mounting with 1/4" NPT drain 3200 Three valve bar stock manifolds 90 Mounting remote 3250 Three valve bar stock manifolds 90 Direct mounting 3300 Three valveforged manifolds 90 Mounting remote with 1/4" NPT drain 3350 Three valve bar stock manifolds 90 Direct mounting with 1/4" NPT drain 3400 Three valve forged manifolds 180 Mounting remote with 1/4" NPT drain 3450 Three valve forged manifolds 180 Mounting remote with 1/4" NPT drain 3500 Three valve bar stock manifolds 180 Mounting remote for differential gauge ( mm ) 3550 Three valve bar stock manifolds 3560 Three valve manifold 180 with TEST POINT Four Valve Manifolds Series Model 4000 Four valve bar stock manifolds 180 Mounting remote with 1/4" NPT drain 4050 Four valve bar stock manifolds 180 Direct mounting with 1/4" NPT drain 4100 Four valve bar stock manifolds 90 Mounting remote with 1/4" NPT drain 4150 Four valve bar stock manifolds 90 Direct mounting with 1/4" NPT drain 4200 Four valve manifolds 180 ( planar ) 4250 Four valve manifolds 180 Mounting remote with 1/4" NPT drain for differential gauges 4300 Four valve manifolds 180 Mounting remote with 1/8" G drain for differential gauges Five Valve Manifolds Series Model 5000 Five valve bar stock manifolds 180 Mounting remote with 1/4" NPT drain 5050 Five valve bar stock manifolds 180 Direct mounting with 1/4" NPT drain 5100 Five valve bar stock manifolds 90 Mounting remote with 1/4" NPT drain 5150 Five valve bar stock manifolds 90 Direct mounting with 1/4" NPT drain 5200 Five valve manifolds Five valve manifolds 180 Mounting remote with 1/4" NPT drain for differentian gauge Male / Female ( mm) 5300 Five valve manifolds 180 Mounting remote with 1/4" NPT drain for differentian gauge Female / Female ( mm) 5350 Five valve manifolds 180 Mounting remote with 1/4" NPT drain for differential gauges 5400 Five valve manifolds 180 Mounting remote with 1/8" G for differential gauges ( 37 mm ) 5450 As 5050 with variables drain 5500 As 5050 Male / Male 5600 Five valve bar stock manifolds 90 Direct with bilancing two valve and 1/4" NPT drain Page 7
8 Page 8
9 Page 9
10 Page 10
11 TIPO DESTRO / right type TIPO SINISTRO / left type TIPO DESTRO / right type High Pressure Valves Features Pressure up to 30,000 PSI ( 2,068 bar ) 9/16 coned and threaded tube Non rotating stem prevents galling and scoring. Stem sleeve and packing gland materials have been selected to achieve extended thread cycle and reduced handle torque. Standard materials of construction include 316 L cold-worked stainless steel, and glass-filled PTFE. PTFE GLASS encapsulated packing provides dependable stem and body sealing. Page 11
12 TIPO DESTRO / right type TIPO SINISTRO / left type Page 12
13 Page 13
14 ACCESSORI / accessories Special items Sami Instruments offers a range of special products to be performed according to the customer s specification. As usual high quality levels are guaranteed. Sami Instrumets produces also a range of valves and manifolds for special uses such as anti-fire systems. Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Manifold Mounting Kits The Sami Instruments MMK is designed for direct or remote mounting to a 2 pipe standard. This kit can be utilized for manifold valves by monting carbon steel or stailess steel bracket directly to the manifold body. Part Number Suitable for: 3300 Three valve forged manifolds 3400 Three valve forged manifolds 3450 Three valve forged manifolds 3451 Three valve forged manifolds 3452 Three valve forged manifolds Part Number Suitable for: 5000 Five valve bar stock manifolds 5050 Five valve bar stock manifolds 5150 Five valve bar stock manifolds 5250 Five valve bar stock manifolds 5300 Five valve bar stock manifolds 5450 Five valve bar stock manifolds 5500 Five valve bar stock manifolds 5600 Five valve bar stock manifolds Part Number Suitable for: 5000 Five valve bar stock manifolds 5050 Five valve bar stock manifolds 5150 Five valve bar stock manifolds 5250 Five valve bar stock manifolds 5300 Five valve bar stock manifolds 5450 Five valve bar stock manifolds 5500 Five valve bar stock manifolds 5600 Five valve bar stock manifolds Page 23
24 Accessories It is available a large selection of accessories to complete the range Plugs - Series 500 Flanges - Series 510 Adapters- Series 520 Bolts and screw - Series 530 Brackets - Series 540 Revolvings Fitt. - Series 550 Bleeder - Series 560 Seals - Series 570 Orifices- Series 580 Page 24
25 Special Items Level Control Level control system on tanks under pressure equipped with a pressure transmitter. Distributor manifolds Distributor manifold built-in a single block bar with needle valves. It reduces weight and eliminates leakages in connection points. Available with multiple ways. Distribution and control panel Sami Instruments produces special control systems in just one block to make plants as much compact as possible. Manifolds and block and bleed manifolds Thanks to the extreme flexibility of the production processes, Sami Instruments designs, produces and tests any product according to the customer s specification whilst maintaining competitive prices. Page 25
26 Special Items High pressure valves Sami Instruments produces a range of high pressure needle valves and high temperature valves to be applied in the chemical and oil industry. Special valves and manifolds Sami Instrumets produces also a range of valves and manifolds for special uses such as anti-fire systems. Distribution and control panel An important business area of Sami Instruments is represented by the production of pneumatic transmitters, vibration switches and air filter regulators. Thanks to their high technological innovation, they meet the needs of several fields successfully. Materials All items by Sami Instruments can be made of different materials such as: AISI 316 L - CARBON STEEL DUPLEX - SUPER DUPLEX - MONEL HASTELLOY C - INCONEL - TITANIUM - BRASS - INCOLLOY Page 26
27 Via Botte, RESCHIGLIANO DI CAMPODARSEGO Padova ( Italy ) Tel Fax Web site. . export@sami-instruments.com Premises Environmental friendly new premises designed to combine production with quality. Quality control Careful controls and tests are carried out in the workshops of Sami instruments in conformity with the regulations in force. Working departments Highly technological working lines ensure absolute production flexibility excellent performances Assembling departments The products are assembled according to precise procedures that guarantee complete reliability. Stockhouse Our stock of standard products allows to deliver orders in few days. SAMI INSTRUMENTS s.r.l. commits iself to constantly improve its products and therefore it riserve the right to modify data, features and performances without norice. Page 27
Page 1 Worldwide Rev e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
Monoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
Ball Valves PSI
6.000-0 PSI Ball Valve Components 10 9 7 11 8 6 2 1 3 4 5 1 BILL OF MATERIALS 1 CLOSE FITTING AISI 316L 2 SEAL RINGS PTFE 3 BALL SEATS PEEK 4 VALVE BODY AISI 316L 5 BALL AISI 316L 6 PIN A4-70 7 GASKET
Monoblock DBB. Page 1
Monoblock DBB Page 1 Page 2 Ball bore size 10 mm Ball and Bleeder Bleeder Antitamper ( optional ) Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend
Instrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
Instrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve posioned in the flow stream to allow or prevent the flow (ball or p); 2. Stem: part which connects the obturator
General Specifications
General Specifications Manifolds for DPHarp EJA and EJX Pressure and Differential Pressure Transmitters Yokogawa Europe bv has included Sami Instruments manifolds in his DPHarp pressure and differential
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 PRODUCTS INDEX 4
Fluid control division MANIFOLD CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 INDEX 4 ACCESSORIES MOUNTING BRACKETS 35 OVAL FLANGES 35 BLEED 35 CONDENSING POTS 36 SYPHONS 36 AIR FEED HEADERS
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
HOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
Double Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003
Double Block and Bleed Manifolds and Flanged Products Catalog 4190-FP October 2003 Contents Page 3 Introduction. Page 4/5 Application illustrations. Page 6 Ball valve specification. Page 7 Outside screw
Angle Type Needle Valves - Miniature Series
Angle Type Needle Valves - Miniature Series Mod. 020-021 - 022 Applications: Pressure instruments isolation (gauges, switches, transmitters, etc.) Connections: Threaded to ANSI-ASME B1.20.1, ISO 228 -
Products for the Oil & Gas Industry
Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
ABB measurement & analytics data sheet. Model M26 Manifold line for 266 pressure transmitters
ABB measurement & analytics data sheet Model M26 Manifold line for 266 pressure transmitters Measurement made easy Engineered solutions for all applications 2 M 26 M a n ifol d li n e for 26 6 p r ess
Valves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51
Valves and protective devices Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51 WIKA data sheet AC 09.23 Applications Shut-off, pressure
Instrumentation Manifolds Traditional C13WT series. For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters
Instrumentation Manifolds Traditional C13WT series For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters Introduction About Yokogawa and WIKA About the catalogue Yokogawa and WIKA have
NEEDLE VALVE GAUGE VALVE VALVE MANIFOLD BALL VALVE ACCESSORIES
NEEDLE VLVE GUGE VLVE VLVE MNIFOLD BLL VLVE CCESSORIES Index Introduction ----------------------------- Valve Manifold VM0 ---------- Product Feature ----------------------- Valve Manifold VM0 ----------6
Block-and-bleed valve 2-valve manifold Models IV20 and IV21
Valves and protective devices Block-and-bleed valve 2-valve manifold Models IV20 and IV21 WIKA data sheet AC 09.19 Applications Shut off and vent pressure measuring instruments For gaseous and liquid aggressive
Block & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
Manifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
Instrumentation Products Monoflanges & VariAS-Blocks
Instrumentation Products Monoflanges & VariAS-Blocks Introduction Introduction The AS-Schneider Monoflanges and VariAS- Blocks are designed to overcome the problems of traditional assemblies on primary
INTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
Recognized globally for our quality, service and the ability to deliver! ISO 9001:
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 www.mac-weld.com MACHINING LTD. CONTENTS Introduction Page 1-2 2 Valve Manifolds Page 3-4 3 Valve Manifolds Page 5-7
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
Manifold Valves. Important!
Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating
Engineered for control from tap to transmitter
Engineered for control from tap to transmitter When it comes to Process Instrumentation, one company stands behind you to minimize risks and maximize productivity CONTINUE Going from tap to transmitter
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
Company and Product Summary
Company and Product Summary Stewart-Buchanan Gauges Ltd AN EMPLOYEE-OWNED COMPANY PLEASE VISIT OUR WEBSITE AT: www.stewarts-group.com About Us At Stewart-Buchanan Gauges Ltd, our aim is to continually
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Instrumentation Products Soft Seated Needle Valves and Manifolds
Instrumentation Products Soft Seated Needle Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation
Instrumentation & Piping Products Monoflange & up to 2" Full Bore DBB Valves
Instrumentation & Piping Products Monoflange & up to 2" Full ore D Valves (Up to and including 15,000 psi / 1035 bar) Innovative and Reliable Valve Solutions Monoflange Ordering Information NV Order Code
Integral Block & Bleed Valves
www.hy-lok.com Catalog No. H-100PIV Feb. 2006 Integral Block & Bleed Valves 2003, 2006 HY-LOK CORPORATION All rights reserved Integral Block & Bleed Valves Contents INTRODUCTION 3 APPLICATION & INSTALLATION
Instrumentation Products. E Series Valves and Manifolds
Instrumentation Products E Series Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation Valves
General Specifications
General Specifications GS 22B01C06-01EN-A C13ST Manifolds for Traditional Mount Differential Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-3 and C13ST-5 manifolds are
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
Instrumentation Needle Valves & Manifolds
Instrumentation Needle Valves & Manifolds One of the most comprehensive component design and manufacture packages available today to the Oil and Petrochemical Industry is offered by Safelok Components.
Anderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
Instrument Manifolds Flanged Products, Ball Valves and Hand Valve Directory. Catalog 4190-PD April 2003
Instrument Manifolds Flanged Products, Ball Valves and Hand Valve Directory Catalog 4190-PD April 2003 Introduction From its ISO9001:2000 facility, Parker Hannifin's Instrumentation Products Division designs
5030/5130. Hard Seat & Soft Seat/Tip. Flow Schematic. Manifold Valves, 5-Valve Natural Gas
Manifold Valves, 5-Valve Natural Gas Hard Seat & Soft Seat/Tip 5030/5130 Flare Pattern option Flow Schematic Designed for use with differential pressure transmitters incorporating two gas applications
Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications
PRODUCT SELECTION GUIDE Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications...Make the leak free connections with Sealexcel products at competitive
Recognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 Quality Service Experience www.mac-weld.com CONTENTS Introduction Page 1-2 Needle Valves Page 3-6 Gauge Valves Page
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
General Specifications
General Specifications GS 22B01C05-00EN-A C13ST Manifolds for Traditional Mount Gauge and Absolute Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-2 2-Valve manifolds are
Instrumentation Valves
Instrumentation Valves Sabre Instrumentation Valves Contents Introduction 2 Model Numbering System 3 Hand Valves 4 VX1, VX2 and VX3 Forged Hand Valves 5 FVX1, FVX2, FVX1A, FVX2A, OFVX1 and OFVX2 Rising
Medium Pressure Instrumentation Ball & Needle Valves, Fittings & Relief Valves
Medium Pressure Instrumentation Ball & Needle Valves, Fittings & Relief Valves (Up to and including 20,000 psi / 1,379 bar) Keeping the World Flowing Contents Page Contents Black - Instrumentation Ball
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
Overview Brochure. Multi Instruments, Edisonweg 1, 4207HE Gorinchem, The Netherlands
Overview Brochure Contact details Multi Instruments: Phone: +31 (0)183 62 88 88 Fax.: +31 (0)183 62 81 82 E-mail: Instrumentation@multi- Homepage: www.multi- http://www.multi http://www.multi-- MI/AP revision
P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports.
introduction we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports. KpL valve ind. co., Ltd. was established in 1986 and for
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F
Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections
PRECISIONISO 9001:2008
SUSTECH PRECISIONISO 9001:2008 Direct Mount Manifolds L Series Rated up to 10 000 psi Compact design Ease of use www.sustech.com sales@sustech.com l +27 11 452-9545 Contents Manifolds and Accessories Manifold
Modular Instrumentation System
www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
INSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
"S" Series Needle/Gauge Valves
"S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads
Gauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
)SLIM LINE) MONOFLANGE VALVES
)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
TBV Instrumentation Valves
TBV Instrumentation Valves A TBV Instrumentation Valves Cameron s TBV instrumentation valves were developed in response to concerns expressed by plant engineers. Common problems such as irregular center-to-center
HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
SLK SERIES SAFETY VALVES
SLK SERIES SAFETY VALVES SLK SERIES TABLE OF CONTENTS Relief Valves SLK-Series are spring loaded pressure relieving devices, suitable for discharge of compressible fluids. SLK-series safety valves are
TRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA WHAT IS A TORFLOW? TheTORFLOW is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement.
PH Series Pressures to 11,000 psi (759 bar)
Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards to ensure the highest quality. Components
2 PC FULL BORE BALL VALVE
Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed Catalog No. VM-3 July 2015 VMD Series Direct Mount Manifolds EN 61518: IEC 61518 standard is
DBB Needle Type Valves
DBB Needle Type Valves Iblok Series Valves are designed to replace conventional multiple-valves installations. Iblok Series Valves use a single integral body to allow 4 separate designs as: Single Block
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Instrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
P R O C E S S V A L V E S. TBV Instrument Valves TBV
TBV Instrument Valves TBV TBV s Process / Instrument Valves were developed in response to concerns expressed by plant engineers. Common problems such as center-to-center spacing in Differential Pressure
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS INSTRUMENT VALVES PRODUCT OVERVIEW
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS INSTRUMENT VALVES PRODUCT OVERVIEW ISSUED NOVEMBER 2012 Leading Instrument Valve Solutions Anderson Greenwood Instrumentation is your best choice for Instrument
Anderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
Kerotest N-Series Needle Valves CRN Approved
K1514 K5534 Product Brief The N-Series is designed for processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs, and other minimally corrosive applications. Features/Benefits
Parker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker utoclave Engineers: Fluid omponents Product February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since