413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F
|
|
|
- Winfred Butler
- 5 years ago
- Views:
Transcription
1 Model 101 Picture model: Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections Process 1/4-18 NPT (F) ANSI / ASME B Instrument 1/4-18 NPT (F) ANSI / ASME B Stem packing Code P/T Material Teflon (PTFE) xxx-01 VITON Grafoil Other packingmat. xxx-06 xxx barg 38 C 200 barg 200 C psig 100 F 3000 psig 400 F 413 barg 38 C 200 barg 400 C 6000 psig 100 F 3000 psig 750 F Sillicon, Kalrez, Supagraf Premier, EPDM, Elast-o-lion Special alloys Alloy 400 Alloy C-276 TITAN DUPLEX Model xxx-02 xxx-03 xxx-04 xxx-10 Stem packing PTFE PTFE PTFE VITON O-ring Alloy 825 Alloy 625 Alloy 254Smo (6M0) Model xxx-12 (825) xxx-12 xxx-11 Other on request Stem packing PTFE PTFE PTFE Optional Oxygen cleaned xxx-xx/c G-threaded connections xxx/b -xx All connections G-threaded ¼ xxx/b14-xx MonelK500 (NACE compliance) xxx-xx5 Mounting bracket 904, 906 or 906/P Rev.1 B - 101
2 Model PTFE GRAFOIL VITON O-ring VITON O-ring panel mounted Bellows + GRAFOIL B Rev.1
3 Model 102 Picture model Standard materials Body, Bonnet, Bellows (102-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections Process 1/2-14 NPT (F) ANSI / ASME B Instrument 1/2-14 NPT (F) ANSI / ASME B Stem packing Code P/T Material Teflon (PTFE) xxx-01 VITON Grafoil Other packingmat. xxx-06 xxx barg 38 C 200 barg 200 C 9000 psig 100 F 3000 psig 400 F 413 barg 38 C 200 barg 400 C 6000 psig 100 F 3000 psig 750 F Sillicon, Kalrez, Supagraf Premier, EPDM, Elast-o-lion Special alloys Alloy 400 Alloy C-276 TITAN DUPLEX Model xxx-02 xxx-03 xxx-04 xxx-20 Stem packing PTFE PTFE PTFE VITON O-ring Alloy 825 Alloy 625 Alloy 254Smo (6M0) Model xxx-12 (825) xxx-12 xxx-11 Other on request Stem packing PTFE PTFE PTFE Optional Oxygen cleaned xxx-xx/c G-threaded connections xxx/b -xx All connections G-threaded ¼ xxx/b14-xx MonelK500 (NACE compliance) xxx-xx5 Mounting bracket 904, 906 or 906/P Vent ½ NPT F (standard is ¼ NPt F) xxx/v12-xx psi solution xxx/10k-xx Rev.0 B - 102
4 Model PTFE GRAFOIL VITON O-ring VITON O-ring panel mounted Bellows + GRAFOIL B Rev.0
5 Model 104 Picture model: MULTIPORT VALVE Standard materials Body, Bonnet AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections Process 1/2-14 NPT (M) ANSI / ASME B Instrument 3 x 1/2-14 NPT (F) ANSI / ASME B Stem packing Code P/T Material Teflon (PTFE) xxx-01 VITON Grafoil Other packingmat. xxx barg 38 C 200 barg 200 C 9000 psig 100 F 3000 psig 400 F xxx barg 38 C 200 barg 400 C 6000 psig 100 F 3000 psig 750 F Sillicon, Kalrez, Supagraf Premier, EPDM, Elast-o-lion Special alloys Alloy 400 Alloy C-276 TITAN DUPLEX Model xxx-02 xxx-03 xxx-04 xxx-20 Stem packing PTFE PTFE PTFE VITON O-ring Alloy 825 Alloy 625 Alloy 254Smo (6M0) Model xxx-12 (825) xxx-12 xxx-11 Other on request Stem packing PTFE PTFE PTFE Optional Oxygen cleaned xxx-xx/c G-threaded connections xxx/b -xx MonelK500 (NACE compliance) xxx-xx psi solution xxx/10k-xx Length of inlet extended to 50 mm xxx/l-xx Accessories Blind plug ½ NPT M Purge plug ½ NPT M Rev.1 B - 104
6 Model PTFE GRAFOIL VITON O-ring B Rev.1
7 Model 106 PICTURE MODEL: GAUGE VALVE WITH BLEEDPLUG Standard materials Body, Bonnet, Plug AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections Process 1/2-14 NPT (M) ANSI / ASME B Instrument 1/2-14 NPT (F) ANSI / ASME B Test 1/4-18 NPT (F) ANSI / ASME B Stem packing Code P/T Material Teflon (PTFE) xxx-01 VITON Grafoil Other packingmat. xxx-06 xxx barg 38 C 200 barg 200 C 9000 psig 100 F 3000 psig 400 F Sillicon, Kalrez, Supagraf Premier, EPDM, Elast-o-lion Optional Oxygen cleaned xxx-xx/c G-threaded connections xxx/b -xx All connections G-threaded ¼ xxx/b14-xx MonelK500 (NACE compliance) xxx-xx5 Mounting bracket 904, 906 or 906/P Vent ½ NPT F (standard is ¼ NPt F) xxx/v12-xx psi solution xxx/10k-xx Special alloys Alloy 400 Alloy C-276 TITAN DUPLEX Model xxx-02 xxx-03 xxx-04 xxx-20 Stem packing PTFE PTFE PTFE VITON O-ring Alloy 825 Alloy 625 Alloy 254Smo (6M0) Model xxx-12 (825) xxx-12 xxx-11 Other on request Stem packing PTFE PTFE PTFE Rev.1 B - 106
8 Model PTFE GRAFOIL VITON O-ring B Rev.1
9 Model 108 Fout! Geen onderwerp opgegeven. Picture model: MULTIPORT VALVE WITH EXTENDED INLET Standard materials Body, Bonnet Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections Process 1/2-14 NPT (M) ANSI / ASME B Instrument 3 x 1/2-14 NPT (F) ANSI / ASME B Stem packing Code P/T Material Teflon (PTFE) xxx-01 VITON Grafoil Other packingmat. xxx barg 38 C 200 barg 200 C 9000 psig 100 F 3000 psig 400 F xxx barg 38 C 200 barg 400 C 6000 psig 100 F 3000 psig 750 F Sillicon, Kalrez, Supagraf Premier, EPDM, Elast-o-lion Special alloys Alloy 400 Alloy C-276 TITAN DUPLEX Model xxx-02 xxx-03 xxx-04 xxx-20 Stem packing PTFE PTFE PTFE VITON O-ring Alloy 825 Alloy 625 Alloy 254Smo (6M0) Model xxx-12 (825) xxx-12 xxx-11 Other on request Stem packing PTFE PTFE PTFE Optional Oxygen cleaned xxx-xx/c G-threaded connections xxx/b -xx MonelK500 (NACE compliance) xxx-xx psi solution xxx/10k-xx Length of inlet extended to 50 mm xxx/l-xx Process side ¾ NPT M Xxx/34-xx Accessories Blind plug ½ NPT M Purge plug ½ NPT M Rev.1 B - 108
10 Model PTFE GRAFOIL VITON O-ring B Rev.1
11 Model 113 Picture model: SINGLE VALVE MANIFOLD FOR DIRECT MOUNTING ON PRESSURE TRANSMITTER Standard materials Body, Bonnet AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections Process 1/2-14 NPT (F) ANSI / ASME B Instrument Flanged IEC61518-A Instrument mounting material 1 Gasket PTFE 2 Bolts 7/16 UNF AISI 316 Stem packing Code P/T Material Teflon (PTFE) xxx-01 VITON Grafoil Other packingmat. xxx barg 38 C 200 barg 200 C 6000 psig 100 F 3000 psig 400 F xxx-05 Sillicon, Kalrez, Supagraf Premier, EPDM, Elast-o-lion Optional Oxygen cleaned xxx-xx/c G-threaded connections xxx/b -xx All connections G-threaded ¼ xxx/b14-xx Mounting bracket 904, 906 or 906/P Special alloys Alloy 400 Alloy C-276 TITAN DUPLEX Model xxx-02 xxx-03 xxx-04 xxx-20 Stem packing PTFE PTFE PTFE VITON O-ring Alloy 825 Alloy 625 Alloy 254Smo (6M0) Model xxx-12 (825) xxx-12 xxx-11 Other on request Stem packing PTFE PTFE PTFE Rev.1 B - 113
12 Model PTFE GRAFOIL VITON O-ring B Rev.1
)SLIM LINE) MONOFLANGE VALVES
)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds PT7 PTM Product Overview The PT Two-Valve Calibration Manifolds are used on static pressure transmitters, switches or gauges. The shutoff valve,
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
SLK SERIES SAFETY VALVES
SLK SERIES SAFETY VALVES SLK SERIES TABLE OF CONTENTS Relief Valves SLK-Series are spring loaded pressure relieving devices, suitable for discharge of compressible fluids. SLK-series safety valves are
General Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Static Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
Purge Adapters. The Solution to Isolate the Process. Flow, Level and Pressure Applications: Product Features: Contact Information:
Purge Adapters The Solution to Isolate the Process Flow, Level and Pressure Applications: Parker s Purge Adapters are used where the sensing lines need a constant purge to prevent plugging, and where the
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
5030/5130. Hard Seat & Soft Seat/Tip. Flow Schematic. Manifold Valves, 5-Valve Natural Gas
Manifold Valves, 5-Valve Natural Gas Hard Seat & Soft Seat/Tip 5030/5130 Flare Pattern option Flow Schematic Designed for use with differential pressure transmitters incorporating two gas applications
Anderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
Kerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
Instrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.
Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.
General Specifications
General Specifications Manifolds for DPHarp EJA and EJX Pressure and Differential Pressure Transmitters Yokogawa Europe bv has included Sami Instruments manifolds in his DPHarp pressure and differential
Anderson Greenwood Instrumentation Products - Manifolds and Accessories
Anderson Greenwood Instrumentation Products - Manifolds and Accessories Total Flow Control Solutions Flow, Static Pressure and Liquid Level Manifolds Flow Control ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
General Specifications
General Specifications GS 22B01C06-01EN-A C13ST Manifolds for Traditional Mount Differential Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-3 and C13ST-5 manifolds are
Anderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
Needle Valves B
Subsea Needle Valves Description Detail MAWP Orifice CV Barrior Body Stem O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem B-4957-01 Sub-Sea Needle Valve -way
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
Multi-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
PERFECTION IS OUR STANDARD...
PERFECTION IS OUR STANDARD... WELCOME TO COLSON X-CEL LTD Providing Precision engineering solutions for the most demanding environments Colson X-Cel Ltd is a well established and most highly respected
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
Manifolds WAY MANIFOLDS. Instrument valves & manifolds
Manifolds WY MNIFOLDS Instrument valves & manifolds OVERVIEW STV offers a broad line of 1,2,3,4 and 5-way instrument manifolds, all available in a wide range of materials and fully compatible with the
TOSACA. Catalogue
Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.
Needle Valves Mini, Hard Seat
Needle Valves Mini, Hard Seat 100 Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51
Valves and protective devices Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51 WIKA data sheet AC 09.23 Applications Shut-off, pressure
General Specifications
General Specifications GS 22B01C05-00EN-A C13ST Manifolds for Traditional Mount Gauge and Absolute Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-2 2-Valve manifolds are
Instrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
Manifold Valves. Important!
Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating
Instrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
INTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
Valves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
HOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
The model M Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location.
200 Series M-220 & M-222 2-Valve Manifolds The model M-220 2-Valve Manifold is designed for remote mounting of a static or gauge transmitter. This design permits the user to mount each unit separately
Sami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI /
CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 PRODUCTS INDEX 4
Fluid control division MANIFOLD CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 INDEX 4 ACCESSORIES MOUNTING BRACKETS 35 OVAL FLANGES 35 BLEED 35 CONDENSING POTS 36 SYPHONS 36 AIR FEED HEADERS
3000F Series. Full Port 2-Way 3-pc Body
Up to 4 psi WOG (275 bar) 3F Series 3F-xxx Series Valve Features Up to 4 psi service Special barstock body material options including Alloy 2, Duplex, Hastelloy C, Monel, Titanium, 254 SMO, Bronze and
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
IY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant
www.ihsungtech.co.kr IY-LOK KOREA Always Together, Always Success since 1993 Products Qualified on UAE BNPP Nuclear Power Plant Lead the Innovation, Since 1993 Always Together, Always Success Company Profile
Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
Overview Replacement Meterbody and Heads for Model STD 110
ST 3000 Smart Transmitter, Release 300 and Smart Field Communicator Model STS03 Transmitter Model STD0 34-ST-99-8 04/03 Addendum (to User s Manual 34-ST-5-4B) Overview Replacement Meterbody and Heads for
V Series Control Port Ball Valves
Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard
.187" Orifice PART NUMBER DESCRIPTION BONNET MATERIAL SEAT STEM SEAL
Options Bonnet Lock Plate Anti-Tamper Bonnet The Bonnet Lock Plate provides a more positive bonnet-locking device than the standard roll pin. The Anti-Tamper Bonnet Handle allows the bonnet stem to be
WYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S
Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless
Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
Monoblock DBB. Page 1
Monoblock DBB Page 1 Page 2 Ball bore size 10 mm Ball and Bleeder Bleeder Antitamper ( optional ) Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05i-Npt Stainless Steel Inline High Pressure Relief
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
Modular Instrumentation System
www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure
Rosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated
Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
Needle Valves Mini, Hard Seat
Needle Valves Mini, Hard Seat 100 SERIES Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
3000R Series. Reduced Port 2-Way 3-pc Body
Up to 4 psi WOG (276 bar) 3R Series 3R-xxx Series Valve Quick Spec Product Scope Size Range 1/2", Body Type 3-pc, non Swing-out design End Connections Flanged, NPT, Weld, Custom Pressure Rating up to 4
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
Instrumentation Products. E Series Valves and Manifolds
Instrumentation Products E Series Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation Valves
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 4600 Series 8700 Series
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
Rosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated
Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
Mark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators
Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908
Monoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
GLOBE 3 WAY CONTROL VALVE SERIES INTRODUCTION
GLOBE 3 WAY CONTROL VALVE SERIES - 130 INTRODUCTION Pneucon' 3 way control valves are used to combine two flows or to divert one flow into two outlets. They are designed to replace and perform the functions
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
Model DF100 Control Valve
FEATURES NACE Service Ready Standard construction for the DF100 control valve features NACE trim. The valve bonnet and body also conform to NACE MR0175 (National Association of Corrosion Engineers) recommendations.