Needle Valves Mini, Hard Seat

Needle Valves Mini, Hard Seat

Needle Valves Mini, Hard Seat 100 SERIES Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance

5030/5130. Hard Seat & Soft Seat/Tip. Flow Schematic. Manifold Valves, 5-Valve Natural Gas

Manifold Valves, 5-Valve Natural Gas Hard Seat & Soft Seat/Tip 5030/5130 Flare Pattern option Flow Schematic Designed for use with differential pressure transmitters incorporating two gas applications

Manifold Valve Accessories

Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.

Screwed Bonnet Needle Valves. Needle Valves

89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available

115 Series, Needle Valves, Single Block, Male x Male

115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,

Anderson Greenwood Series M9 Block and Bleed Gauge Valves

A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application

ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES

A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION

3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)

3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards

Anderson Greenwood PTM/PT7 Static Pressure Manifolds

m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings

High Pressure Ball Valves

High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum

Anderson Greenwood M4TL Liquid Level Manifolds

A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for

Static Pressure Manifolds PTM and PT7 2-Valve Manifolds

Static Pressure Manifolds PTM and PT7 2-Valve Manifolds PT7 PTM Product Overview The PT Two-Valve Calibration Manifolds are used on static pressure transmitters, switches or gauges. The shutoff valve,

Purge Adapters. The Solution to Isolate the Process. Flow, Level and Pressure Applications: Product Features: Contact Information:

Purge Adapters The Solution to Isolate the Process Flow, Level and Pressure Applications: Parker s Purge Adapters are used where the sensing lines need a constant purge to prevent plugging, and where the

413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F

Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections

Anderson Greenwood M24A/M24T Differential Pressure Manifolds

Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum

ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS

ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION

Hexagonal Bar Stock Needle Valve

Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)

Anderson Greenwood M25/M251 Block and Bleed Gauge Valves

Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or

Multi-Port Gauge Valves M5 and M51

Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration

ANDERSON GREENWOOD H7/H71 HAND VALVES

3 /16 (4.8 mm) orifice hard-seated hand valves for pressures to 6000 and 10000 psig (414 and 689 barg) FEATURES H7 GENERAL APPLICATION H7 series valves are designed for safe, repetitive bubble-tight closure,

Anderson Greenwood M1/M110 Differential Pressure Manifolds

A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1

Static Pressure Manifolds M25, M25A, M25B, M251 and M251B

Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,

NEW! Valve Line Expansion & Faster Delivery times

Volume 4, Issue 3 Fall 2012 In This Issue EDITOR S NOTE NEW: Expanded Valve Offering Mobile Web Site PRODUCT FOCUS NEW: Meter Manifold Valves NEW: Stem Tip Options Hazardous Location Transmitters APPLICATION

Instrumentation Manifold Valves

Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3

Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves

Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities

Needle Valves. Catalog 1203/1205 Aug 2012

Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -

Check Out Our New Website

Volume 1, Issue 3 Summer 2009 In This Issue EDITOR S NOTE Check out our NEW website PRODUCT FOCUS Instrument Swivel Adapter 2-Valve Static Pressure Block & Bleed Valves High Pressure Bleed Valves Electronic

Anderson Greenwood MB Series Integral Manifolds

A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static

INSTRUMENTATION - valves

Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear

MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.

A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds

METERING VALVES H1300 SERIES.

METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F

S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service

www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel

Evans SS-G & GXL -Series Integrated Stainless Gas Sticks

SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator

ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS

Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design

KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS

Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy

Valves. and Accessories. dixonvalve.com Customer Service:

UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACT Valves and Accessories Customer Service: 877.963.4966 Valve Selection Guide Ball Valve Can be used for on

High Pressure Ball Valves. Ball Valves

High Pressure 79 Valve Options Reliable, simple, operation for onoff service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum turbulence

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the

Anderson Greenwood Instrumentation Products - Manifolds and Accessories

Anderson Greenwood Instrumentation Products - Manifolds and Accessories Total Flow Control Solutions Flow, Static Pressure and Liquid Level Manifolds Flow Control ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS

Metering Valves Catalog 4170-MV December 2010

Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering

ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS

A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product

Check Valves, Filters and Relief Valves

Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the

T5 Series Pressures to 5,000 psi (345 bar)

Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards to ensure the highest quality. Components

Instrumentation Manifold Valves

Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3

Miniature Solenoid Valves

Miniature Solenoid Valves Our IPS Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat

ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves

ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the

Instrument Manifolds. High Technology Valve & Fitting Series

Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing

PRECISIONISO 9001:2008

SUSTECH PRECISIONISO 9001:2008 Direct Mount Manifolds L Series Rated up to 10 000 psi Compact design Ease of use www.sustech.com sales@sustech.com l +27 11 452-9545 Contents Manifolds and Accessories Manifold

needle valves Needle Valves

Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219

needle valves Needle Valves

Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219

Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds

www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to

P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD

3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold

CRN. Series 560/570 Safety Valves. 12 Aquatrol Safety Relief Valves

Series 560/570 Safety Valves Our 560 / 570 valve line is a high capacity safety valve used for boilers, piping lines and vessel protection. Designed and engineered for heavy-duty industrial use. ASME and

TABLE OF CONTENTS. Ball Valves

bal lval ves TABLE OF CONTENTS Ball Valves High Pressure, 2 Way 3 High Pressure,3 Way 4 High Pressure, Handles 5 Locking Kit 5 Low Pressure, Brass & Stainless Steel 6 Mini 5 HIGH PRESSURE BALL VALVES -

Hydraulic Valves Needle Valves

Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series

LEVEL CONTROL SWITCHES

The LINC-282 & LINC-282SC Series: Snap Acting, Non-Bleed Pneumatic Level Control Switches Application: These units are used as a level control or as a high or low level alarm. The pneumatic output can

Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e

W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold

Gauge Valves and Instrumentation Manifolds

Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443

We Are the Worldwide Provider for All Your Valve and Fitting Needs

Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track

PH Series Pressures to 11,000 psi (759 bar)

Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards to ensure the highest quality. Components

Be llows-se aled Valve s

www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,

D I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV

TM TBV Series 21/51 Cryogenic Diverter Ball Valve TBV Series 21/51 Cryogenic Diverter Ball Valve incorporates all features found in the 2100 and provides diverting capabilities for use where two or more

Plug Valves. PV Series. End Connections: 1/8 to 1/2 in. (6 to 12mm) Working Pressure: Up to 3,000 psig (200 bar)

Plug Valves PV Series Working Pressure: Up to,000 psig (00 bar) Temperature Range: -0 to 00 F (- to 0 C) Flow Coefficient: Up to 6. End Connections: /8 to / in. (6 to mm) Wide variety of end connection

T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet

T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not

General Specifications

General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters

Instrumentation Products Soft Seated Needle Valves and Manifolds

Instrumentation Products Soft Seated Needle Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation

Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves

120 SERIES ONE PIECE TYPE

120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,

3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT

3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT SERIES Features FULL PORT 3-way L or T flow path Functions as a diverter, selector or mixing valve Four ball seat

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the

We Are the Worldwide Provider for All Your Valve and Fitting Needs

Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for

Manifold & Gauge Valves I [

Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle

)SLIM LINE) MONOFLANGE VALVES

)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are

BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends

BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical

Be llows-se aled Valve s

www.swagelok.com Be llows-se aled Valve s BN Series Packless valves with all-metal seal to atmosphere Working pressures up to 500 psig (34.4 bar) Temperatures up to 200 F (93 C) 1/4 to 1/2 in. and 6 to

Miniature Multimedia Valves

2 Inert Isolation PTFE 3-Way Solenoid Valve Series 1 The Series 1 diaphragm type valve has a low internal volume and rapid response time, which enables users to get readings quickly for their analysis.

Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...

Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...

3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated

M50 and H70 ANDERSON GREENWOOD 3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated Features and Benefits Cost savings are realized as the root valves are in-line

INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4

591 INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4 INDUSTRIAL VALVES / BRASS BALL VALVES 592 BRASS EUROPE

funnels, measures, gravity cocks, jerry cans and oil suction pumps...

funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................

Contents. General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts

Contents General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts Manifolds 4 Ordering Tree 5 Pressure vs. Temperature Ratings 6 5-Valve Manifold Overview 8 5-Valve Manifold

Evans G-Series Integrated Gas Sticks

Evans G-Series Integrated Gas Sticks G-SERIES CFOS Stick Features Series CV GS 0.14 GM 1. GL 1.80 Working Pressure 0 psig (34.5 Bar) 0 psig (34.5 Bar) 0 psig (34.5 Bar) Operating Temperature - F to 1 F

High-Pressure Needle Valves

www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design

C22A Parts. Brass Body. C22AA, C22AB, and C22AC. No. Part Number Description Pump

C22A Parts C22AA, C22AB, and C22AC 1 C22-004-1005 Adjusting bolt, Pressure range A...1 C22-004-1006 Adjusting bolt, Pressure range B, C...1 2 C22-005-1000 Jam nut...1 3 C22-015-2000 Screw, Cap, 5/16 x

Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...

Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265

Packless Valves. Instrument / Analyzer Products. Catalog 4515/USA April 2006

Packless Valves Instrument / Analyzer Products Catalog 4515/UA April 2006 NV55 eries Catalog 4515/UA NV55 eries High Flow Diaphragm Valves Parker Hannifin Corporation s presents the NV55. The NV55 is an

Sami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI /

P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD

P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and

Static Pressure Manifolds M4AP and M4TP Manifolds

Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold

Flow Limit Safety Shutoff Valves Model 1

Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,

Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom

Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns

www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens

Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters

ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold

2 PC FULL BORE BALL VALVE

Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded

See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section.

See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section. water gauges 20-100 Series light Pattern Bronze Water Gauges LEAD FREE OPTION COMING SOON!

Instrumentation Products. Mini Valves and Rupture Disc Holders

Instrumentation Products Mini Valves and Rupture Disc Holders General Features I Mini Valves and Rupture Disc Holders Introduction Rugged Design for long term performance in the most demanding environmental

Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:

VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.