METERING VALVES H1300 SERIES.

Transcription

1 METERING VLVES H00 SERIES

2 METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F (0 C) Flow coefficients (Cv) from 0.00 to 0. Round & Slotted Handles with Screwdriver Slots HMLET LETLOK Ends, Male & Female NPT, HTC Face Seal Bead End Connections, and Stem Taper for required flow control Stem with Stopper Shoulder long lifetime GENERL The H00 Series is a moderatepressure instrumentation flowregulating needle valve. It is generally used for instrumentation panels, sampling systems and accurate applications. The valves are compact in size and structure and offer reliably low and moderate flow regulation with long service life. The H00 Series is rated to max. 000 psig (0 bar). HXF00 MTERILS Item Components Qty. Valve Body Material No. St.St. Brass Handle Set Screw Flow Fixing Screw Handle Panel Nut Safety Bonnet Sleeve Bonnet Stem Stem Ring Oring Guide Ring Orifice Body Front Ferrule Back Ferrule Nut 88 Stainless Steel 88 Stainless Steel St.St. STM 7 St.St. STM 7 St.St. STM 7 St.St. STM 7 St.St. 7PH/ Glassfilled TFE Viton (fluorocarbon) Glassfilled TFE St.St. STM 7 St.St. STM 7 St.St. STM 7 St.St. STM 7 St.St. STM 7 HXF SERIES STRIGHT VLVE Brass STM B Brass STM B Brass STM B Brass STM B Brass STM B Brass STM B Brass STM B Brass STM B Brass STM B Safety Bonnet Sleeve prevents bonnet release from body. Lock Set screw helps determine required flow (slotted handles). Safety Bonnet Sleeve Stem Upper Shoulder (for safe, full opening) prevents locking between stem and bonnet. Guide Ring keeps the stem concentric to the orifice. 0 Tapered Stem Tip controls accurate gas and liquid flow rate.

3 METERING VLVES H00 SERIES H&HF00 MTERILS Item Components Qty. Valve Body Material No. St.St. Brass Handle Set Screw St.St. STM 7 Brass STM B Flow Fixing Screw 88 Stainless Steel Handle St.St. STM 7 Panel Nut St.St. STM 7 Brass STM B Safety Bonnet Sleeve St.St. STM 7 Brass STM B Bonnet St.St. STM 7 Brass STM B 7 Stem St.St. 7PH/ 8 Oring Viton (fluorocarbon) 9 Guide Ring Glassfilled TFE 0 Body St.St. STM 7 Brass STM B Front Ferrule St.St. STM 7 Brass STM B Back Ferrule St.St. STM 7 Brass STM B Nut St.St. STM 7 Brass STM B HF SERIES VLVE Stem Upper Shoulder (for safe, full opening) prevents locking between stem and bonnet. Safety Bonnet Sleeve Lock Set Screw helps determine required flow (slotted handles) Tapered Stem Tip controls accurate gas and liquid flow rate. Guide Ring keeps the stem concentric to the orifice.

4 METERING VLVES H00 SERIES F F F E Panel Hole E Panel Hole C C D D D Number H00 H00 Straight HF00 HF00 Straight HXF00 HXF00 Straight mm 0.''. mm 0.0'' 0.8 mm 0.0'' 0. Max 0.0 Max 0.00 Max B DIMENSIONS (MM) H00, HF00 & HXF00 Basic Orifice Cv Inlet Outlet open B C D E F Ordering Stem Taper mm/inch /'' LETLOK MM LETLOK /'' LETLOK /8'' LETLOK MM LETLOK /'' Male NPT /8'' LETLOK /'' LETLOK MM LETLOK MM LETLOK /8'' Male NPT /'' Male NPT /8'' Male NPT /'' Male NPT /8'' Female NPT /8'' LETLOK /8'' LETLOK MM LETLOK MM LETLOK /8'' Male NPT /'' Male NPT /8'' Female NPT /8'' Male Face Seal /8'' LETLOK /'' LETLOK MM LETLOK /8'' Male NPT /'' Male NPT /8'' LETLOK /'' LETLOK MM LETLOK MM LETLOK /'' Male Face Seal /'' LETLOK MM LETLOK /'' LETLOK /8'' LETLOK MM LETLOK /'' Male NPT /8'' LETLOK /'' LETLOK MM LETLOK MM LETLOK /8'' Male NPT /'' Male NPT /8'' LETLOK /'' LETLOK /8'' Female NPT /8'' LETLOK /'' LETLOK MM LETLOK MM LETLOK /8'' Male NPT /'' Male NPT /8'' Female NPT /8'' Male Face Seal /8'' LETLOK /'' LETLOK MM LETLOK /8'' LETLOK /'' LETLOK /8'' LETLOK /'' LETLOK MM LETLOK MM LETLOK /'' Male Face Seal B mm in mm in mm in mm in mm in HXF Series. mm (0.7'') maximum panel thickness H and HF. mm (0.'') maximum panel thickness B 9 mm.'' 9 mm.''. mm 0.''. mm 0.''. mm 0.''. mm 0.'' Dimensions are for reference only, and are subject to change.

5 METERING VLVES H00 SERIES CLENING & PCKGING HMLET metering valves are treated with HMLET Passivation Cleaning and Packaging ( Procedure 807 ). Oxygen Cleaning and Packaging for other end connections is available as an option. TESTING The H, HF and HXF Series metering valve designs have been tested for Proof and Burst. Every H,HF & HXF00 metering valve is factory tested for proper assembly, using leak detection. Every H00 metering valve is tested for leakage and bubbletight at 00 psig (.8 bar). TECHNICL DT Series Pressure Temperature Ratings Orifice Shutoff Service Stem Taper Temperature F (C ) Pressure psig (bar) in mm HXF 000 () 0.0 (0.8) No HF H 0 F to 00 F ( C 0 C) Viton Oring 0 F to 00 F ( C 8 C) BunaN Oring *Shutoff Service: In Stainless steel construction only. Stainless steel H00 Series valves are not recommended for shutoff in vacuum or gas service, or for repetitive shutoff in liquid service. 000 (8.9) 000 (8.9) (.) (.) No *Yes ORINGS Different materials are available for special applications. Oring Material Temperature Rating F (C ) Buna N Ethylene Propylene Viton (Fluorocarbon) Kalrez Neoprene 0 to 0 ( to ) 70 to 0 (7 to ) to 00 ( to 0) to 00 ( to 0) to (7 to 07)

6 METERING VLVES H00 SERIES FLOW SETTING The handle deadstop position is set at to 0 std cm/min with psig ( bar) inlet pressure. HXF00 (METERING VLVE ) H00 (METERING VLVE ) Flow Coefficient (Cv) Flow Coefficient (Cv) Turns Turns Maximum Flow Coefficient (Cv) 0.00 Pressure Drop to tmosphere psi (bar) 0 (0.8) 0 (.) 00 (.8) Water Flow U.S gal/min (L/min) 0.0 (0.0) 0.0 (0.07) 0.0 (0.) ir flow stb ft / min (stb L / min) 0.0 (.) 0. (.8) 0. (.) Maximum Flow Coefficient (Cv) 0. Pressure Drop to tmosphere psi (bar) 0 (0.8) 0 (.) 00 (.8) Water Flow U.S gal/min (L/min) 0.7 (.7).0 (.7). (.) ir flow stb ft / min (stb L / min). (.). (7) 7.9 () HF00 (METERING VLVE ) Flow Coefficient (Cv) Turns Maximum Flow Coefficient (Cv) 0.0 Pressure Drop to tmosphere psi (bar) 0 (0.8) 0 (.) 00 (.8) Water Flow U.S gal/min (L/min) 0.09 (0.) 0. (0.79) 0. (.) ir flow stb ft / min (stb L / min) 0. (9.) 0.9 (.). (.)

7 METERING VLVES H00 SERIES ORDERING INFORMTION Your Safety is important to us. Please ensure proper reference to our latest catalog. Valve Description Example: H 00 SS L / S OPTIONL Valve Series H HF HXF Valve Type LETLOK End Connection Female End Connection Male End Connection Male to LETLOK End Connection Other valve types are available by special request. /8 / /8 Pattern Valve Type S End Connection Size inch inch inch Straight Port Valve Port Valve mm mm Oring Material EP NE KZ BU EPDM, EPM Neoprene Kalrez BunaN Viton Orings are standard for St.St. body construction. Body and Ends Material SS St.St. B Brass * H lloy C7 * M Monel * For these materials, please consult HMLET. End Connection L N GL HL LETLOK Threaded NPT Male Face Seal ONELOK Other end connections are available upon request. Handle Color G R Y Green Red Yellow Black round aluminum handle is standard for H Series only. Metal slotted st.st. handle is standard for HF and HXF series. Oxygen Clean OC Oxygen Clean LF Lubricant Free Warning Select the right component for safety's sake: The total design of the system must be taken into consideration when selecting components in order to ensure that your HMLET products provide safe, troublefree operation. It is the responsibility of the system designer and the user to consider the compatibility of the materials, of the components and system, the function of the component, appropriate ratings and to ensure proper installation, operation and maintenance. Improper selection or use of products can cause property damage or personal injury, in respect of which the system designer and/or the user shall be solely liable and responsible.