Check Valves, Filters and Relief Valves
|
|
|
- Audrey Willis
- 5 years ago
- Views:
Transcription
1 Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010
2 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by the spring, the lower stem opens, permitting flow through the valve. Flow through the valve increases proportionately to the increase in upstream pressure. Features Pressure settings are externally adjustable while the valve is in operation. Eight different spring ranges provide greater system sensitivity and enhanced performance. Captured molded seat design is blow-out and chip resistant. Manual Override option with positive stem retraction is available for pressures up to 1500 psig (103 bar). This option permits the user to relieve upstream pressure while maintaining the predetermined cracking pressure. Color coded springs and labels indicate spring cracking range. Lock wire feature secures a given pressure setting. Specifications Working Pressure: Up to 6000 psig (414 bar) CWP. Up to 8000 psig (552 bar) during relief with no internal seal damage. Cracking Pressure: Eight springs, from 50 psig to 6000 psig in the following ranges: psig psig psig ( bar) ( bar) ( bar) psig psig psig ( bar) ( bar) ( bar) psig psig ( bar) ( bar) Temperature Rating: Nitrile F to +225 F (-34 C to +107 C) Highly Fluorinated Fluorocarbon F to +200 F (-29 C to +93 C) Ethylene Propylene F to +275 F (-57 C to +135 C) Fluorocarbon F to +400 F (-23 C to +204 C) Neoprene F to +250 F (-43 C to +121 C) Flow Calculations Pressure Pressure Drop DP 60 F (16 C) 60 F (16 C) psig bar psig bar gpm m 3 /hr SCFM m 3 /hr Crack Pressure vs. Reseal Pressure Note: Valves which are not actuated for a period of time may initially crack at higher than set crack pressures. Note: To determine MPa, multiply bar by Parker Hannifin Corporation
3 Catalog 4135-CV Series Relief Valves s of Construction Model Shown: 4A-A-BNT-SS-K1 Model Shown: 4A-A-VT-SS-MN-K2 Item # Part 1 Cap ASTM A 479, Type Spring 17-7 Stainless Steel 3 Locknut 316 Stainless Steel 4 Upper Stem ASTM A 479, Type Bonnet ASTM A 479, Type 316 *6 Stem Seal **Fluorocarbon *7 Lower Stem ASTM A 479, Type 316 *8 Seat Retainer ASTM A 479, Type Plug Zinc Plated Steel 10 Washer PTFE *11 Stem Guide ASTM A 479, Type Back-up Ring PTFE *13 Body Seal **Fluorocarbon *14 Seat **Fluorocarbon *15 Valve Body ASTM A 182, Type F Handle Stem ASTM A 479, Type Handle Phenolic * Wetted Parts ** Optional seat and seal materials are located in How to Order section. Lubrication: Perfluorinated polyether. 37 Parker Hannifin Corporation
4 Series Relief Valves Catalog 4135-CV Dimensions / Flow Data 3.25 Max (82.8) 2.72 Min (69.1) 7/8" Hex 1" Hex 1.26 (32.0) A B.59 (15.0) Model Shown: 4M4F-A-VT-SS-MN-K2 Model Shown: 4A-A-BNT-SS-K1 Dimensions in inches (millimeters) are for reference only, subject to change. End Connections Flow Data Dimensions Basic Part () (Outlet) Orifice A B C V X T * Number Port 1 Port 2 Inch mm inch mm inch mm 4A-A 1/4" A-LOK Compression 1/4" A-LOK Compression Z-A 1/4" CPI Compression 1/4" CPI Compression M4A-A 1/4" Male NPT 1/4" A-LOK Compression M4Z-A 1/4" Male NPT 1/4" CPI Compression M4F-A 1/4" Male NPT 1/4" Female NPT KF-A 1/4" Female BSP/ISO Tapered 1/4" Female BSP/ISO Tapered KM-A 1/4" Male BSP/ISO Tapered 1/4" Male BSP/ISO Tapered M6A-A 6mm A-LOK Compression 6mm A-LOK Compression M6Z-A 6mm CPI Compression 6mm CPI Compression M8A-A 8mm A-LOK Compression 8mm A-LOK Compression M8Z-A 8mm CPI Compression 8mm CPI Compression * Tested in accordance with ISA S Gas flow will be choked when P 1 - P 2 / P 1 = x T. For CPI and A-LOK : Dimensions are measured with nuts in the finger tight position. 38 Parker Hannifin Corporation
5 Catalog 4135-CV Series Relief Valves How to Order Dimensions in inches (millimeters) are for reference only, subject to change. The correct part number is easily derived from the following example and ordering chart. The eight product characteristics required are coded as shown in the chart. Example 1 below describes an A Series externally adjustable relief valve equipped with 1/4" CPI compression inlet and outlet ports, Nitrile seals, PTFE back-up ring, stainless steel construction, and a 3000 to 4000 psig (206.8 to bar) spring kit. Example 2 below describes an A Series externally adjustable relief valve equipped with 1/4" male NPT inlet port, 1/4" female NPT outlet port, ethylene propylene seals, PTFE back-up ring, stainless steel construction, manual override option, and a 50 to 350 psig (3.4 to 24.1 bar) spring kit. Example 1: 4Z-A-BNT-SS-K6 (shown in the part number blocks below) Example 2: 4M4F-4H4A-EPRT-SS-MN-K1 4Z A BN T SS K6 Outlet Valve Series Seal Back-Up Rings** Body Actuation Spring Kit*** Outlet 4M Male NPT 4F Female NPT 4A A-LOK Compression 4Z CPI Compression 4KF Female BSP/ISO 4KM Male BSP/ISO M6A A-LOK Compression M6Z CPI Compression M8A A-LOK Compression M8Z CPI Compression Valve Series Seal A V Fluorocarbon BN Nitrile EPR Ethylene Propylene NE Neoprene KZ Highly Fluorinated Fluorocarbon Back-Up Rings** Body T PTFE SS 316 Stainless Steel * If the inlet and outlet ports are the same, eliminate the outlet port designator. ** To order valve with an elastomer back-up ring, eliminate Back-Up Rings code. *** To order only the valve without a spring kit, eliminate Spring Kit code. Actuation Blank Standard MN Manual Overdrive Spring Kit*** (psig) K K K K K K K K Spring Kits Kit Part Number Cracking Pressure Range (psig) Cracking Pressure Range (bar) Color Code KIT-SP Gray KIT-SP Red KIT-SP Orange KIT-SP Yellow KIT-SP Light Green KIT-SP Light Blue KIT-SP Violet KIT-SP Lemon Yellow Seal Kits Kit Part Number KIT--VT KIT--BNT KIT--EPRT KIT--NET KIT--KZT Seat/Seal Fluorocarbon Nitrile Ethylene Propylene Neoprene Highly Fluorinated Fluorocarbon Seal Kit Contains: Stem Seal Bonnet Seal PTFE Back-Up Ring Lower Stem Assembly Maintenance Instructions Spring Kit Contains: Spring Coded label PTFE washers Locking wire / lead seal Installation Instructions 39 Parker Hannifin Corporation
RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by t
Relief Valves (RL4 Series) Catalog 411-RL Revised, July 2001 RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted
Relief Valves. Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
Metering Valves Catalog 4170-MV December 2010
Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering
Check Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
Ball and Plug Valves
Ball and Plug Valves Catalog 4121-BV March 2010 Parker Hannifin Corporation Catalog 4121-BV Table of Contents Description... Page B Series Ball Valves, 6,000 psi Maximum*...3 Two-Way...4 Three-Way...6
Ball Valves (B Series) Catalog 4121-B January 2006
Ball Valves (B Series) Catalog 4121-B January 2006 B Series Ball Valves Catalog 4121-B Pressure vs. Temperature Pressure (psig) Temperature ( C) -54-18 10 38 66 93 121 149 177 204 232 6500 6000 448 414
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001 Introduction Parker VQ Series Needle Valves are the right combination of performance and value for manual or pneumatic onoff control in moderate
Ball Valves (B Series) Catalog 4121-B Revised, November 2001
Ball Valves (B Series) Catalog 4121-B Revised, November 2001 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick
Ball Valves (B Series) Catalog 4121-B September 1999
Ball Valves (B Series) Catalog 4121-B September 1999 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick 1/4 turn
O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
Ball Bleed Butterfly Check Directional Control Flow Control...
Ball...15-1 15-23 Bleed...15-24 15-26 Butterfly...15-27 Check...15-28 15-39 Directional Control...15-40 15-47 Flow Control...15-48 15-52 Manapak Sandwich...15-53 15-57 Metering...15-58 15-67 MPI...15-68
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
Ball Valves (MB Series) Catalog 4121-MB Revised, January 2005
Ball Valves (MB Series) Catalog 4121-MB Revised, January 2005 Introduction Parker MB Series Ball Valves, with their rugged compact design, offer positive shut off or directional control of fluids in process,
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)
Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking
Parker IntraFlow ISA/ANSI SP Compliant Modular Systems. Catalog 4250 Revised, December 2003
Parker IntraFlow ISA/ANSI SP76.00.02 Compliant Modular Systems Catalog 4250 Revised, December 2003 Parker IntraFlow Modular Systems Introduction to Serious Simplicity Parker IntraFlow substrate fittings
V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar)
Valves Check Valves V33, VP33, VA33, VDA33, VH36 and VL36 Series for VCH36 Series for CNG/NGV applications Pressures up to 3,000 psig (206 bar) and 6,000 psig (413 bar) No.V336-9 November 2014 Fixed cracking
Hydraulic Inline Tee
Hydraulic...-1-13 Inline...-14-17 Inline - MPI TM...-1 Tee...-19-21 FILTERS If you can t find it, your local Parker distributor can! Just because it s not in our catalog doesn t mean you can t get it.
Parker IntraFlow ISA/ANSI SP Compliant Modular Systems. Catalog 4250 Revised, December 2003
Parker IntraFlow ISA/ANSI SP76.00.02 Compliant Modular Systems Catalog 4250 Revised, December 2003 Parker IntraFlow Modular Systems Introduction to Serious Simplicity Parker IntraFlow substrate fittings
Plug Valves. PV Series. End Connections: 1/8 to 1/2 in. (6 to 12mm) Working Pressure: Up to 3,000 psig (200 bar)
Plug Valves PV Series Working Pressure: Up to,000 psig (00 bar) Temperature Range: -0 to 00 F (- to 0 C) Flow Coefficient: Up to 6. End Connections: /8 to / in. (6 to mm) Wide variety of end connection
Equipment - Thread Identification Kit Flanges Gaskets Gauges Hydraulic Preset Tools Sight Glass...
Equipment - Thread Identification Kit...-6 Flanges...-1-2 Gaskets...-3 Gauges...-4 Hydraulic Preset Tools...-5 Sight Glass...-7 Sight Glass - /Replacement Parts...-7 Systems...-8-13 ACCESSORIES If you
High Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass
V33, VP33, VA33, VDA33, VH36 and VL36 Series VCH36 Series for CNG/NGV applications Pressures up to 3000 psig (206 bar) and 6000 psig (413 bar)
V, VP, VA, VDA, VH6 and VL6 Series VCH6 Series for CNG/NGV applications Pressures up to g (26 ) and 6 g (4 ) Catalog No. V6 December 2 Features Fixed cracking pressure valves: V, VP, VH6, VCH6 Series Adjustable
D-Pro Check Valves. SS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
DPro V, VP, VA, V6 and V6 Series Fixed and Adjustable cracking pressure Pressures up to (6 ) and 6 (4 ) Catalog No V66. May 8 Features Fixed and adjustable cracking pressure. Reliable DKOK Tube Fitting,
Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
VC & VPC Series Check Valves
VC & VPC Series Check Valves Up to 10 000psig (689 bar), Steel, and Brass Catalog No. VC-4 July 2015 Design VC and VPC Series Check Valves are designed to prevent reverse flow and keep the fluid in one
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
Bleed Valves and Purge Valves
www.swagelok.com Bleed Valves and Purge Valves Bleed Valves Pressures up to psig (689 bar) Temperatures up to 8 F ( C) 36 stainless steel, carbon steel, or alloy R- materials Purge Valves Pressures up
SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds
www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to
DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动
DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents
Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
Valves. E Valves. Multiple Hydraulic System Applications
s Multiple Hydraulic System Applications Parker Check s are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. Offered
Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold
VN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass materials Check Valves
Check Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series 1 www.swagelok.com Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end
High Pressure Ball Valves. Ball Valves
High Pressure 79 Valve Options Reliable, simple, operation for onoff service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum turbulence
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
METERING VALVES H1300 SERIES.
METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
Solution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof The Best Partner Flow & Control Solution Partner for Value Creation Ball Valves SBV SBV30 SBV60 SFBV60 SBVSeries For
Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
5100 Series Inline Relief Valve 10 to 2,400 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 5100 Series Inline Relief Valve 10 to 2,400 PSIG Features Zero Leakage to 95% of Cracking Pressure Positive Reseal
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
High-Pressure Needle Valves
www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design
Special Alloy Ball Valves
www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design
Be llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s BN Series Packless valves with all-metal seal to atmosphere Working pressures up to 500 psig (34.4 bar) Temperatures up to 200 F (93 C) 1/4 to 1/2 in. and 6 to
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
Quick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA July 202 Locations Grantsburg, WI Chetek, WI FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS
500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
Bellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
FLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
SS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
V, VP, VA, VH6 and V6 Series VCH6 Series for CNG/NGV applications Fixed and Adjustable cracking pressure Pressures up to (26 ) and 6 ( ) Catalog No. V67 March 2 Fixed and adjustable cracking pressure.
SUBSEA VALVES
SUBSEA VALVES Fitok Subsea Valves are manufactured with some notable differences to standard models to help ensure effective fluid transfer for the Oil and Gas Industry. Valves within the range include
BELLOWS VALVES. Microelectronics Product Line. Catalog 4506/USA October 2003
BELLOWS VALVES Microelectronics Product Line Catalog 46/USA October 2003 BELLOWS VALVES Microelectronics Product Line Catalog 46/USA October 2003 table of contents Veriflo Division................... 1
Plug Valves. P4T and P6T Series. Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections
Plug Valves P4T and P6T Series 1 www.swagelok.com Plug Valves P4T and P6T Series Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections 1/8 through
Medium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range Bottom-loaded stem
Quick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 38 USA February 14 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER USE
Flow Control Valves Check Valves Gauge Control Valves. Colorflow Valves
Check Valves Gauge Control Valves Colorflow Valves Colorflow and Ball Valves Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Ball Valves Fully guided poppets are used on
One-Piece Ball Valves. VB2GB, VB23GB Series
One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Type MR108 Direct-Operated Backpressure Regulators
July 2016 Type MR108 Direct-Operated Backpressure Regulators P1202_1 P1203_1 Type mr108 with low-pressure Actuator Type mr108 with high-pressure actuator Figure 1. Type MR108 Direct-Operated Backpressure
J Series Filters HIGH PRESSURE FILTERS. J88 Mini In-Line (Replaceable Filter) J85 Tee-Type. J82 Mini In-Line. J83 In-Line
J Series Filters HIGH PRESSURE FILTERS J Series Filters provide filtration of particulates in gas and liquid systems prior to pressure or flow control components. J Series Filters utilize a pleated, 0
Be llows-se aled Valve s
www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,
MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the
Tr unnion Ball Valve s
www.swagelok.com Tr unnion Ball Valve s 83 Series and H83 Series Working pressures up to 10 000 psig (689 bar) 1/8 to 1/2 in. and 6 to 12 mm Swagelok tube fitting or NPT end connections 316 stainless steel
Toggle Valves. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
Toggle Valves OG,, and 92 1 www.swagelok.com Toggle Valves OG,, and 92 Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials 2 Needle and Metering
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Swagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
Trunnion Ball Valves. TB Series. Wide variety of end connection types and sizes. Flow Coefficient: up to 1.6
Trunnion Ball Valves Series Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in. (6 to 1 mm) Temperature Range: -40 to 450 F (-40 to 3 C) -way and 3-way valves Flow Coefficient:
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
Figure 1: HB Series Ball Valve Cross Sectional View DISASSEMBLY WARNING: MAKE CERTAIN THE SYSTEM IN WHICH THE VALVE IS INSTALLLED IS EXHAUSTED OF ALL
Maintenance Instructions MI-142 Revision - HB Series Ball Valve MAXIMUM ALLOWABLE WORKING PRESSURES Table 1 Maximum Allowable Working Pressure versus Seat Material Seat Stainless Steel Material Body Material
Quick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 2014 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
Hard Seat Fluid Pressure Regulator
Instruction Sheet P/N 04742-02 Description The Nordson hard seat fluid pressure regulator is designed for use with abrasive coatings. The regulator body is constructed of stainless steel with a nickel-plated
Quick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 2014 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel