120 SERIES ONE PIECE TYPE
|
|
|
- Elfrieda Davis
- 5 years ago
- Views:
Transcription
1
2 120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight, Angle and 3-Way flow patterns Each and every valve is tested at the factory Specifications Testing Pressure rating 3000psig F (21 C) Temperature rating 50 to 150 F (10 to 65 C) with PTFE seat and packing Body material 316 stainless steel and Brass Port Connections 1/16 to 3/4 and 3mm to 12mm Orifice and (1.3mm to 10.3mm) Each Valve is tested with nitrogen at 1000psig(69bar) to maximum allowable leak rate of 0.1 SCCM. Packing Adjustment Valves are adjusted for factory testing at 1000psig(69bar). Packing must be readjusted for service at higher pressures. Materials of Construction Material Grade / ASTM Specification No. Component Stainless Steel Brass Handle Zinc 1 Set Screw Stainless Steel 2 Panel Nut Stainless Steel Brass 3 Packing Bolt SS316 / A479 Brass / B16 *4 Packing PTFE 5 Upper Packing Gland SS316 / A479 6 Lower Packing Gland *7 Upper&Lower Ball Seat PTFE Side Disc *8 SS316 - Sintered Side Ring *9 Ball Stem SS316 / A479 *10 Body SS316 / A479 Brass / B16 Wetted components are marked "*" 2
3 H SERIES H Series : 2-Way (On - Off Valve) End Connections Orifice Cv Series Part No. Inlet Outlet A A1 B D E F G H I W H1 H2 H3 H4 S /16 SUPERLOK S 3M 0.2 3mm SUPERLOK S /8 SUPERLOK F 2N 0.5 1/8 FEMALE NPT S 6M mm SUPERLOK S /4 SUPERLOK F 2N 1.2 1/8 FEMALE NPT F 4N 0.9 1/4 FEMALE NPT F 4R 0.9 1/4 ISO FEMALE M 4N 1.2 1/4 MALE NPT MS 4N /4 MALE NPT 1/4 SUPERLOK S 6M 2.4 6mm SUPERLOK S /4 SUPERLOK S 8M 1.5 8mm SUPERLOK S /8 SUPERLOK F 4N 3.0 1/4 FEMALE NPT F 6N 2.6 3/8 FEMALE NPT F 6R /8 ISO FEMALE S /8 SUPERLOK S 10M mm SUPERLOK F 8N 6.3 1/2 FEMALE NPT F 8R 6.3 1/2 ISO FEMALE S 12M mm SUPERLOK S /2 SUPERLOK S /4 SUPERLOK Dimensions shown with SUPERLOK nuts measure in the finger-tight, where applicable. All dimensions are for reference only, subject to change 3
4 H SERIES H Series : 3-Way (Switching Valve) End Connections Orifice Cv Series Part No. Inlet Outlet A A1 B D E F G H I W H13 H23 H33 H43 S /16 SUPERLOK S 3M mm SUPERLOK S /8 SUPERLOK F 2N 0.3 1/8 FEMALE NPT S 6M mm SUPERLOK S /4 SUPERLOK F 4N 1/4 FEMALE NPT 0.75 F 4R 1/4 ISO FEMALE MS 4N /4 MALE NPT 1/4 SUPERLOK S 6M 6mm SUPERLOK S 4 1/4 SUPERLOK S 8M 0.8 8mm SUPERLOK F 4N 1.7 1/4 FEMALE NPT F 6N 3/8 FEMALE NPT F 6R 7.1 3/8 ISO FEMALE S 6 3/8 SUPERLOK 2.0 S 10M 10mm SUPERLOK F 8N 1/2 FEMALE NPT 3.5 F 8R 1/2 ISO FEMALE S 12M mm SUPERLOK S 8 1/2 SUPERLOK S /4 SUPERLOK Dimensions shown with SUPERLOK nuts measure in the finger-tight, where applicable. All dimensions are for reference only, subject to change 4
5 H SERIES Pressure Rating Vlave 2-Way Straight Pattern psig (bar) 2-Way Angle Pattern psig (bar) 3-Way Switching psig (bar) H (172) 2500 (172) 2500 (172) H (206) 2500 (172) 2500 (172) H (172) 1500 (103) 1500 (103) H (172) 1500 (103) 1500 (103) Flow Data at 70 F (21 C) Straight Type Pressure Dorp to Atmospher( p)psi Cv Air Flow, SCFM Water Flow, US GPM Angle Type & 3-Way Pressure Dorp to Atmospher( p)psi Cv Air Flow, SCFM Water Flow, US GPM Ordering Information Example : H1 A - S - 6M - SS Valve Series SBVH120H1 SBVH120H2 SBVH120H3 SBVH120H4 2. Pattern Designator Nil:2-Way Straight (Standard) A:2-Way Angle 3:3-Way 3. End Connection Type S : SUPERLOK Tube Fitting F : Female Thread M : Male Thread MS : Male Thread to SUPERLOK Tube Fitting 4. End Connection Size -Tube O.D Designation Tube O.D (inch) 1/16 1/8 1/4 3/8 1/2 Designation Tube O.D (mm) Designation 3M 6M 8M 10M 12M - Pipe Thread Designation Size(inch) 1/8 1/4 3/8 1/2 Screwed NPT 2N 4N 6N 8N Screwed BSPT 2R 4R 6R 8R 5. Meterial Designator SS : 316 Stainless Steel B : BRASS 5
6 210 SERIES TWO PIECE TYPE SBV210 Series Features Compact design Tight and smooth, low torque and easy operation Butterfly and lever handle available Variety of End Connections Each and every valve is tested at the factory Specifications Pressure-Temperature Ratings Pressure rating Body material Port Connections Orifice 1000psig F (21 C) 316 stainless steel and Brass 1/4 to 1 and 6mm to 16mm 5.0mm to 16.0mm Materials of Construction Material Grade / ASTM Specification No. Component Stainless Steel Brass SS304 Lever handle with PVC color coated 1 Handle Zinc butterfly handle with nickel plated 2 Stem SS316 / A479 3 Lock Nut Stainless Steel 4 Upper Stem Washer SS304 / A479 5 Lower Stem Washer 6 Upper Stem Seal PTFE 7 Lower Stem Seal 8 Ball SS316 / A479 9 Seat PTFE 10 Connector Seal Body SS316 / A479 Brass / B16 End Connector SS316 / A479 Brass / B16 Insert(for Female Thread) SS316 / A479 6
7 SBV210 SERIES SBV210 Series Orifice Cv End Connections Series Part No. (mm) A H I L S 6M mm SUPERLOK 79.8 S /4 SUPERLOK F 4N 1.4 1/4 FEMALE NPT 42.8 S 10M mm SUPERLOK 91.5 S /8 SUPERLOK F 6N 2.6 3/8 FEMALE NPT 46.6 S 12M mm SUPERLOK SBV210 S /2 SUPERLOK F 8N 9.5 1/2 FEMALE NPT 55.0 S 16M mm SUPERLOK S /8 SUPERLOK S /4 SUPERLOK F 12N /4 FEMALE NPT 61.3 S SUPERLOK F 16N FEMALE NPT All dimensions are for reference only, subject to change SBVA210 Series Orifice End Connections Series Part No. (mm) A B H S /4 SUPERLOK S /8 SUPERLOK SBVA210 S /2 SUPERLOK S /4 SUPERLOK S SUPERLOK All dimensions are for reference only, subject to change 7
8 SBVT210 SERIES SBVT210 Series C B SUPERLOK A SUPERLOK BMT SUPERLOK OPEN CLOSE SUPERLOK Orifice End Connections Series Part No. (mm) A B C S /4 SUPERLOK S /8 SUPERLOK SBVT210 S /2 SUPERLOK S /4 SUPERLOK S SUPERLOK All dimensions are for reference only, subject to change Ordering Information Example : - S BH - SS Valve Series SBV210 SBVA210 SBVT End Connection S : SUPERLOK Tube Fitting F : Female Thread 3. End Connection Size -Tube O.D Designation Tube O.D (inch) 1/4 3/8 1/2 3/4 1 Designation Tube O.D (mm) Designation 6M 10M 12M 16M - Pipe Thread Designation Size(inch) 1/4 3/8 1/2 3/4 1 Screwed NPT 4N 6N 8N 12N 16N Screwed BSPT 4R 6R 8R 12R 12R 4. Handle Designator Nil : Butterfly Handle (Standard) BH : Bar Handle 5. Meterial Designator SS : 316 Stainless Steel B : BRASS 8
9 360 SERIES THREE PIECE HIGH-PRESSURE TYPE SBVH360 Series Features Compact design High flow rate with maximum orifice Variety of End Connections Anti blow-out stem design Each and every valve is tested at the factory Fire safety design available Specifications Pressure rating Temperature rating Body material Port Connections Orifice 6000psig F (21 C) -22 to 265 F (-30 to 130 C) with PVDF seat -65 to 500 F (-54 to 260 C) with PEEK seat 316 stainless steel and Brass 1/4 to 1 and 6mm to 25mm 10.0mm to 19.0mm Testing Each Valve is tested with nitrogen at 1000psig(69bar) to maximum allowable leak rate of 0.1 SCCM. Hydrostatic shell test is porformed at 1.5 times of the working pressure. (OPTION) Materials of Construction No. Component Material Grade / ASTM Specification Stainless Steel 1 Handle SS304 Lever handle with PVC color coated 2 Lock Nut 3 Spring Washer Stainless Steel 4 Pin *5 Stem SS316 / A479 6 Stem Washer SS304 / A479 *7 Stem Packing PTFE *8 Ball SS316 / A479 *9 Seat PVDF (Standard) *10 End Connector SS316 / A479 *11 Connector Seal PTFE *12 Body SS316 / A479 Wetted components are marked "*" 9
10 SBVH360 SERIES SBVH360 SERIES (2-Way) Orifice Cv End Connections Series Part No. A B I H d (min) S /4 SUPERLOK S /8 SUPERLOK S 8 1/2 SUPERLOK F 4N 1/4 FEMALE NPT SBVH3601 F 6N /8 FEMALE NPT F 8N 1/2 FEMALE NPT M 4N 3.7 1/4 MALE NPT M 6N 7.2 3/8 MALE NPT M 8N 7.5 1/2 MALE NPT F 8N 1/2 FEMALE NPT F 12N 3/4 FEMALE NPT SBVH3602 M 12N /4 MALE NPT S 10 5/8 SUPERLOK S 12 3/4 SUPERLOK F 12N 3/4 FEMALE NPT F 16N 1 FEMALE NPT SBVH3603 S /4 SUPERLOK S SUPERLOK M 12N /4 MALE NPT M 16N MALE NPT All dimensions are for reference only, subject to change SBVH360-3S SERIES (3-Way) SIDE INLET PORT SBVH360-3B SERIES (3-Way) BOMTTOM INLET PORT Orifice End Connections Series Part No. A B I H C S 4 1/4 SUPERLOK S 6 3/8 SUPERLOK SBVH3601-3B S 8 1/2 SUPERLOK & SBVH3601-3S F 4N 1/4 FEMALE NPT F 6N 3/8 FEMALE NPT F 8N 1/2 FEMALE NPT SBVH3602-3B & SBVH3602-3S SBVH3603-3B & SBVH3603-3S S 10 5/8 SUPERLOK S 12 3/4 SUPERLOK F 8N 1/2 FEMALE NPT F 12N 3/4 FEMALE NPT S 12 3/4 SUPERLOK S 16 1 SUPERLOK F 12N 3/4 FEMALE NPT F 16N 1 FEMALE NPT
11 SBVH360 SERIES Pressure & Temperature Rating 2-Way Straight Valve Series & Way Angle & 3-Way Materials Pressure C to 21 C Seat Stem Packing End Connector Seal (-65 F to 70 F) Temperature Rating PVDF -30 C to 130 C(-22 F to 265 F) 6000psig (413bar) PCTFE -30 C to 150 C(-22 F to 355 F) PEEK 10000psig (689bar) -54 C to 230 C(-65 F to 446 F) PTFE PVDF 5000psig (344bar) PCTFE -23 C to 191 C(-10 F to 375 F) PEEK 6000psig (413bar) Valve Series & 3603 Materials Pressure C to 21 C Temperature Rating Seat Stem Packing End Connector Seal (-65 F to 70 F) PVDF -30 C to 130 C(-22 F to 265 F) 4000psig(275bar) PCTFE -30 C to 150 C(-22 F to 355 F) PEEK 6000psig(413bar) -54 C to 230 C(-65 F to 446 F) PTFE VITON PVDF 3000psig(206bar) PCTFE -23 C to 191 C(-10 F to 375 F) 4000psig(275bar) PEEK Ordering Information Example : SBVH S PE - SS Valve Series 2-Way straight 2-Way Angle 3-Way : Bottom Inlet Port 3-Way : Side Inlet Port - SBVH SBVH3601-A - SBVH3601-3B - SBVH3601-3S - SBVH SBVH3602-A - SBVH3602-3B - SBVH3602-3S - SBVH SBVH3603-A - SBVH3603-3B - SBVH3603-3S 2. End Connection S : SUPERLOK Tube Fitting F : Female Thread M : Male Thread 3. Connection Size -Tube O.D Designation Tube O.D (inch) 1/4 3/8 1/2 5/8 3/4 1 Designation Pipe Thread Designation Size(inch) 1/4 3/8 1/2 3/4 1 Screwed BSPT 4N 6N 8N 12N 16N Screwed NPT 4R 6R 8R 12R 12R 4. Seat Material Designator Nil: PVDF(Standard) PC: PCTFE PE: PEEK 5. Meterial Designator SS : 316 Stainless Steel M : ALLOY (Monel) 11
12
Solution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof The Best Partner Flow & Control Solution Partner for Value Creation Ball Valves SBV SBV30 SBV60 SFBV60 SBVSeries For
SWB 310 SERIES SWING - OUT BALL VALVES
SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Integral Bonnet Bar Stock Needle Valves
Integral Bonnet Bar Stock Needle Valves SBNV Series Features Integral bonnet design Bar stock body Compact design Low operating torques Variety of End Connections Straight and Angle flow patterns Each
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
Integral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
Integral Bonnet Needle Valves
Integral Bonnet Needle Valves SINV Series eatures Compact design Low operating torques Panel mountable Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve
Union Bonnet Needle Valves
Union Bonnet Needle Valves SUNV Series Features Panel mountable Nonrotating stem tips Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve is tested at
Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
VN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
Ball and Plug Valves
Ball and Plug Valves Catalog 4121-BV March 2010 Parker Hannifin Corporation Catalog 4121-BV Table of Contents Description... Page B Series Ball Valves, 6,000 psi Maximum*...3 Two-Way...4 Three-Way...6
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
Ball Valves (B Series) Catalog 4121-B September 1999
Ball Valves (B Series) Catalog 4121-B September 1999 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick 1/4 turn
Manifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
Instrumentation Quick-Connects
Instrumentation Quick-Connects SQC SERIES Features Simple push-pull action to connect and disconnect lines - no tools required. Plug and body are available valved or unvalved. Valves automatically open
Block & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
One-Piece Ball Valves. VB2GB, VB23GB Series
One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
C-INV V2. Cv Factor : 0.09 ~ 0.73 Orifice : to in. (2mm to 6.4mm) U-PRO fittings Inc.
C-INV-0911-V2 Cv Factor : 0.09 ~ : 0.079 to 0.252 (2 to.4) U-PRO fittings Inc. Materials of Construction 4 3 2 1 Stem of Tip U-PRO integral needle valves are offer ith variety of Stem tips. Starderds are
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
CNG Products. Receptacles, Ball & Check Valves Filters, Tube Fittings. ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested
www.hy-lok.com Catalog No. H-CNG100 April 2014 CNG Products Receptacles, all & Check Valves Filters, Tube Fittings ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested 2007, 2014
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
Ball Valves (B Series) Catalog 4121-B Revised, November 2001
Ball Valves (B Series) Catalog 4121-B Revised, November 2001 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick
BALL VALVES - VB3 Series
1 Piece Integral Stem Materials of Construction No. Description Body Material 1 Handle Directional Handle Materials Nylon Panel Mountable Nut Various End Connections & Sizes Compact 1 Piece Body BALL VALVES
Ball Valves (B Series) Catalog 4121-B January 2006
Ball Valves (B Series) Catalog 4121-B January 2006 B Series Ball Valves Catalog 4121-B Pressure vs. Temperature Pressure (psig) Temperature ( C) -54-18 10 38 66 93 121 149 177 204 232 6500 6000 448 414
metering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001 Introduction Parker VQ Series Needle Valves are the right combination of performance and value for manual or pneumatic onoff control in moderate
BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
Special Alloy Ball Valves
www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
Swagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
Multi-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
Evans G-Series Integrated Gas Sticks
Evans G-Series Integrated Gas Sticks G-SERIES CFOS Stick Features Series CV GS 0.14 GM 1. GL 1.80 Working Pressure 0 psig (34.5 Bar) 0 psig (34.5 Bar) 0 psig (34.5 Bar) Operating Temperature - F to 1 F
INSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Gauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
INSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
BELLOWS VALVES. Microelectronics Product Line. Catalog 4506/USA October 2003
BELLOWS VALVES Microelectronics Product Line Catalog 46/USA October 2003 BELLOWS VALVES Microelectronics Product Line Catalog 46/USA October 2003 table of contents Veriflo Division................... 1
High Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
Page ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
Tr unnion Ball Valve s
www.swagelok.com Tr unnion Ball Valve s 83 Series and H83 Series Working pressures up to 10 000 psig (689 bar) 1/8 to 1/2 in. and 6 to 12 mm Swagelok tube fitting or NPT end connections 316 stainless steel
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
One-Piece Encapsulated Ball Valves
One-Piece Encapsulated Ball Valves EB Series Working Pressure: up to 3000 psig (206 bar) End Connections: 1/16 to 3/4 in. (3 to 12 mm) Temperature Range: -65 to 300 F (-53 to 148 C) 2-way, Angle and 3-way
General Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
Instrument Manifolds. High Technology Valve & Fitting Series
Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing
SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds PT7 PTM Product Overview The PT Two-Valve Calibration Manifolds are used on static pressure transmitters, switches or gauges. The shutoff valve,
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
packless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE Inc.
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By:
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions
Medium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range Bottom-loaded stem
Locked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
Be llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,
Plug Valves. PV Series. End Connections: 1/8 to 1/2 in. (6 to 12mm) Working Pressure: Up to 3,000 psig (200 bar)
Plug Valves PV Series Working Pressure: Up to,000 psig (00 bar) Temperature Range: -0 to 00 F (- to 0 C) Flow Coefficient: Up to 6. End Connections: /8 to / in. (6 to mm) Wide variety of end connection
SERIES 9000 Double Offset HP Butterfly Valves
SERIES 9000 Double Offset HP Butterfly Valves Publication S9000-101 Issue 5/18 Rev. D DESIGN Design Characteristics STEM DESIGN: Available in square shaft for easy mounting of actuators, levers and gear
Anderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
High-Pressure Needle Valves
www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design
Pressure Regulators RHPS Series
Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to
Medium-Pressure Ball Valves
www.swagelok.com Medium-Pressure Ball Valves FKB Series Innovative stem and end connection seal design (patent-pending): maintains full pressure rating throughout the entire operating temperature range
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
2 PC FULL BORE BALL VALVE
Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded