Kunkle Models 91/218/228 liquid relief valves Safety and relief products
|
|
- Juliana Glenn
- 6 years ago
- Views:
Transcription
1 Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from system. Quality cast iron body and bonnet. Insert and disc available in bronze or stainless steel and lapped for optimum performance. Springs are steel with plating for corrosion protection. High lift, wing-guided disc offers high relieving capacity. Pivot between disc and spring corrects misalignment and compensates for spring side thrust. ANSI B1.1 rated 0# inlet and 1# outlet flanged connections as standard. Optional epoxy-coated internal body and bonnet for corrosive environments (to 1 F ( C)). General application Liquid relief valves suitable for overpressure relief, pressure regulation and protection of pumps, tanks, lines and hydraulic systems. Models 18, 8 are UL 178 listed and FM approved for fire pump service. Technical data Connections: 1½ to FNPT 1½ to flanged Temperature range [1] : -0 to 0 F (-9 to 08 C) Pressure ranges [1] : Model 91: to 00 psig (0. to 7. barg) Models 18, 8: 0 to 00 psig (.1 to 1.8 barg) 1. For other pressure and temperature limits consult ANSI B1 cast iron flange standards Emerson. All rights reserved. VCTDS-0080-EN 1/0
2 Model overview Model 91: bronze trim with pressure-tight cap. Suitable for maximum back pressure of 0 psig (.1 barg) [1]. Model 18: bronze trim, UL and FM approved for fire pump installations. Special design offers minimum set pressure of 0 psig. Easily adjustable with handwheel to 00 psig (1.8 barg) (17 psig (1.1 barg) with optional 1# inlet flange). Model 8: bronze trim with pressure-tight cap. UL and FM approved for fire pump installations. Suitable for maximum back pressure of 0 psig (.1 barg) [1]. Supplied with handwheel. 1. Back pressure increases set pressure on a one to one basis and reduces capacity. Back pressure in excess of 10% of set pressure is not recommended. Parts and materials - Model 91 [, ] - Non-code, liquid relief valve No. Part name Materials 1 Body Iron, A1 class A or B O-ring NBR [9] Insert [1] Disc [1] Spring step [] Spring Steel, aluminum coated 7 Bonnet gasket Fiber and nitrile, klinger C-00 or C-01 8 Hex head cap screw [] Steel, SAE Gr. 9 Bonnet Iron, A1 class A or B 10 Cap gasket [] Fiber and nitrile, klinger C-00 or C [7] Compression screw bushing Iron, A Jam nut [] 1 Compression screw [] 1 Cap [] Iron, A1 class A or B 1 Socket set screw Steel, commercial 1 Stem [] 17 Stem end [8] Items not shown Handwheel [] Iron, A1 class A or B Handwheel jam nut [] Steel plated, commercial Model s 1. Disc (item ) and insert (item ) material bronze, B-8 alloy 800 or B, also available in SS, A7 Gr. CF-8, as a package option.. Material CS with anti-corrosion coating, commercial Gr. or brass, B1.. bolts required for and sizes, and 8 bolts required for size.. Material brass, B1 or bronze, B8 casting.. Handwheel option available, delete cap (item 1) and gasket (item 10).. Flanges per ANSI B1.1. 0# inlet flange standard and 1# inlet flange optional. Outlet flange 1#. 7. Only used in orifices K through P. 8. Material SST or brass, B1. 9. For variation O-ring material is Viton. 1
3 Parts and materials - Models 18 and 8 - Non-code No. Part name Materials 1 Body [1] Iron, A1 class A or B O-ring NBR Model Insert [] Disc [] Spring step [] Spring Steel, aluminum coated 7 Bonnet gasket Fiber and nitrile, klinger C-00 or C Hex head cap screw [] Steel, SAE Gr. [] 9 Bonnet Iron, A1 class A or B 10 Compression screw bushing Brass, B1 11 Jam nut Brass, B1 1 Compression screw [] 1 Handwheel Iron, A1 class A or B 1 Handwheel locknut Steel plated, commercial Gr. 1 Spring pin Steel, commercial Gr. 1 Socket set screw Steel, commercial Gr Stem [] Compression screw locknut wrench [] Steel, A Installation instruction [] Paper, commercial Gr. 18 Stem end [] Model 8 only 18 Cap [7] Iron, A1 class A or B 19 Cap gasket [7] Gasket, klinger silicone C-00 s 1. Flanges per ANSI B1.1. 0# inlet flange standard and 1# inlet flange optional. Outlet flange 1#.. Disc (item ) and insert (item ) material bronze, B-8 alloy 800 or B, also available in SS, A7 Gr. CF-8, as a package option.. Material CS with anti-corrosion coating, commercial Gr., brass, B1 or SS, A8 TY 1.. bolts required for and sizes, and 8 bolts required for size.. Material brass, B1 or bronze, B8 casting (Model 18 only), B8 alloy 800 (Model 8 only).. Not shown on assembly. 7. Cap (item 18), gasket (item 19) and locknut (item 11) factory installed. Handwheel (item 1) shipped unassembled (Models 18 and 8). 1 Model
4 Specifications - Model 91 [1] Valve dimensions Min/max Approx. Model Valve size Connections ANSI standard (in) set pressure weight number (in) Inlet Outlet A B C (psig) (lb) 091A-G 1½ x 1½ FNPT FNPT ¾ ¼ 11⅞ / H-G 1½ x 1½ 1# FL 1# FL ¾ ¼ 11¼ /17 091K-G 1½ x 1½ 0# FL 1# FL ¾ 11¼ /00 091A-H x FNPT FNPT ⅛ ⅛ 1¾ /00 091H-H x 1# FL 1# FL ¾ ⅝ 1¾ / K-H x 0# FL 1# FL ⅝ 1¾ / A-J ½ x ½ FNPT FNPT ½ ½ 1¼ / H-J ½ x ½ 1# FL 1# FL ¼ ¾ 1¼ /17 091K-J ½ x ½ 0# FL 1# FL ¼ ¾ 1¼ /00 091A-K x FNPT FNPT ⅞ ⅞ 1 / H-K x 1# FL 1# FL ⅞ ⅞ 1¾ / K-K x 0# FL 1# FL ¼ ⅞ 1¾ / A-M x FNPT FNPT ⅝ ½ / H-M x 1# FL 1# FL ⅝ ½ / K-M x 0# FL 1# FL ⅝ ½ / H-P x 1# FL 1# FL 9⅜ 8½ 1 / K-P x 0# FL 1# FL 9⅜ 8½ 1 /00 0 Specifications - Models 18 and 8 [1] Valve dimensions Min/max Approx. Model Valve size Connections ANSI standard (in) set pressure weight number (in) Inlet Outlet A B C (18) C (8) (psig) (lb) *8A-K [] x FNPT FNPT ⅛ ⅞ 0⅝ 1⅝ 0/00 8 *8H-K [] x 1# FL 1# FL ⅛ ⅞ 0⅝ 1⅝ 0/ *8K-K [] x 0# FL 1# FL ⅛ ⅞ 0⅝ 1⅝ 0/ *8A-M [] x FNPT FNPT ⅝ ½ 0/00 1 *8H-M [] x 1# FL 1# FL ⅝ ½ 0/17 18 *8K-M [] x 0# FL 1# FL ⅝ ½ 0/00 18 *8H-P [] x 1# FL 1# FL 9⅜ 8½ 0 1 0/17 0 *8K-P [] x 0# FL 1# FL 9⅜ 8½ 0 1 0/00 0 Dimensions are for reference only. FL Flange FNPT Female NPT s 1. Temperature limits -0 F to 0 F.. Replace asterisk with desired model number. Data applicable to Models 18, 8. Model 91 Models 18, 8 C C A A B B
5 Capacities - Non-code liquid - % accumulation (GPM) - Model 91 only Set pressure Inlet size (psig) 1½ ½ Liquid Overpressure Factors To determine capacities at other than % overpressure/accumulation, multiply capacity shown by: 10% acc. = 0. 1% acc. = 0.8 0% acc. = 0.9 Models 18, 8 capacities UL/FM Certified capacities [1] Size (in) GPM x 00 x 1000 x Rated at 100 psig set pressure and % accumulation 1 psig.
6 Selection guide Example: 091 K - M 01 A M S 000 Model Connection type A Female x female NPT H 1# flange x 1# flange K 0# flange x 1# flange Connection size G 1½" inlet x 1½" outlet H " inlet x " outlet J ½" inlet x ½" outlet K " inlet x " outlet M " inlet x " outlet P " inlet x " outlet Variation 01 Catalog standard 0 SS seat and disc (all models except Model 18K-P) 0 Model 91 w/handwheel (K, M and P inlet only) 0 SS seat and disc (Model 18K-P only) 0 Models 18 and 8 epoxy coated body and bonnet internal surfaces (except Model 18K-P) 0 Model 18K-P epoxy coated body and bonnet internal surfaces 0 Model 91 epoxy coated body and bonnet internal surfaces 0 SS seat and disc with epoxy coated body and bonnet internal surfaces Model 91 SS seat and disc with Viton O-ring seal Design revision Indicates non-interchangeable revision Current design at revision 'A' Valve service M Liquid Spring material C Aluminum coated, ASTM A1 steel (G, H, J inlet sizes only) S Aluminum coated, ASTM A9 steel (K, M, P inlet sizes only) Set pressure 000 psig psig Viton is a registered trademark of The Chemours Company. 017 Emerson. All rights reserved.
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationCast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationKunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
More informationModels 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
More informationKUNKLE Safety and Relief ValVe PRoductS overview
KUNKLE Safety and Relief ValVe PRoductS overview april 2015 KUNKLE Safety and Relief ValVe PRoductS overview Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP, 200A and
More informationPressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
More informationKunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW ISSUED NOVEMBER 2012 KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP,
More informationCASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
More informationSafety and Relief Valves Product Overview
Safety and Relief Valves Product Overview Kunkle Valve is a leading supplier of Safety and Relief Valve Products for industrial and commercial applications, such as steam boilers, air, or non-hazardous
More informationModels 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
More informationPressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
More informationKunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
More informationCASH VALVE SERIES FR BACK PRESSURE VALVES
Diaphragm actuated valves designed for either continuous or intermittent operation which provide accurate, repetitive pressure control FEATURES GENERAL APPLICATION For use on practically all fluids and
More informationKunkle Safety and Relief Products. Series 6000
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
More informationModel descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified.
More informationCrosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
More informationKunkle Safety and Relief Products
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
More informationKunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More information13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationType 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
More information197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
More informationKUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS
Bronze safety valves to ASM section I and VIII, steam, V and UV ; section VIII, air/gas, UV National Board certified including models to ASM section IV, steam V. P certified for non-hazardous gas ATURS
More informationCASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
More informationSafety and Relief Valves for Industrial and Commercial Applications.
Safety and Relief Valves for Industrial and Commercial Applications. Kunkle Safety and Relief Valve Products Overview Kunkle Safety and Relief Valve Products Overview Contents Models 1 and 2 Brass Safety
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationCASH VALVE K SERIES BACK PRESSURE VALVES
High capacity angle bypass regulators or back pressure control valves with models for pressures to 1500 psig (103.4 barg) and capacities to 200 gallons per minute (757 l/min.) FEATURES GENERAL APPLICATION
More information1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
More informationConsolidated* Valves 1511 Series Safety Valve
Technical Specifications Rev. B - 10/2018 Consolidated* Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well as
More informationCLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationMasoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
More informationKENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
More information9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
More informationPRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationModel-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
More informationKunkle Series 900 safety relief valves safety and relief products
Bronze, steel and stainless steel safety relief valves for air, gas, steam, liquid and vacuum service that meet ASME Section VIII, UV ; Section I, V, are National Board certified and PED certified for
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationCROSBY STYLE JB PRESSURE RELIEF VALVE
A large orifice pressure relief valve engineered to provide high quality, dependable overpressure protection for air, gas, vapor and steam applications FEATURES Ten size product range is the broadest available.
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationModel 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
More informationVAREC 5910B AND 5920B SERIES RELIEF VALVE WITH FLAME ARRESTER
These units combine the high flow capacity of a pressure and vacuum relief valve with an easy-to-maintain flame arrester for maximum protection and reliable operation FEATURES 5920B Oversized pressure
More informationMERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
More informationVAREC 5810B AND 5820B SERIES RELIEF VALVE WITH FLAME ARRESTER
These units combine the high flow capacity of a pressure and vacuum relief valve with an extensible bank flame arrester to provide maximum protection and reliable operation FEATURES 5820B Oversized pressure
More informationSAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
More informationDM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
More informationCrosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
More informationCASH VALVES TYPE G-60 PRESSURE REGULATORS
A self-contained, self-actuated high capacity all purpose regulator designed to operate within close limits FEATURES GENERAL APPLICATION The G-60 is designed for use with steam, water, air, oil, gases,
More informationSeries Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
More informationModel descriptions. Applications
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Models 910, 911, 916 and 917 ASME Section VIII, Air/Gas/Steam/Liquid, UV National Board certified. Models 920, 921 and 927 ASME Section I Special use
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationCrosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
More informationYARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
More informationFKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
More informationLEAD FREE * LFF115 (Globe) LFF1115 (Angle)
ES-ACV-SB-LFF115_LFF1115 LEAD FREE * Pressure Reducing Control Valve Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS)
More informationMustang Series PRESSURE REDUCING CONTROL VALVE. M115 (Globe) M1115 (Angle) Schematic. Standard Components. Options & Accessories.
PRESSURE REDUCING CONTROL VALVE 02/09 Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L Standard Components 1 Main Valve
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationCROSBY J-SERIES DIRECT SPRING PRESSURE RELIEF VALVES
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design FEATURES ASME/NB certified capacities for
More informationAmerican Flow control Series 2500
American Flow control 14-66 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Lifting DEVICES 14-66 Valve is constructed of high-strength
More informationT200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
More information627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
More informationFIRE PROTECTION PRODUCTS
SUPER CENTURION FIRE HYDRANT Mueller Super Centurion Fire Hydrant Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout North America. There are a number of
More informationFKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
More information9100 SERIES Model 20 MERCER VALVE THINK...MERCER FIRST
9100 SERIES Model 20 MERCER VALVE THINK...MERCER FIRST 9100 Series Model 20 Product Overview The 9100 Series Model 20 is a high pressure safety relief valve designed for CNG and other high pressure applications.
More informationP627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
More informationMODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
More informationThe PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
More informationP627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
More informationMERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the
More informationAIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
More informationRP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
More informationLEAD FREE * LFM115 (Globe) LFM1115 (Angle)
ES-ACV-SB-LFM115_LFM1115 LEAD FREE * Pressure Reducing Control Valve Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L
More informationOR STAINLESS STEEL CONSTRUCTION
FLUID COOLING Shell & Tube Series 92 COPPER/STEEL OR STAINLESS STEEL CONSTRUCTION Features API/BASCO Interchange ASME Code Option Preferred for New Oil-Water Applications C-Series / SSC Series Rugged Steel
More informationKINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050
More informationP99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
More informationBaumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the
More informationCrispin. The UL Series Universal Air Release Valves. Compound Lever System NPT Screwed or ANSI Class Flanges Available.
The UL Series Universal Air Release s Compound Lever System NPT Screwed or ANSI Class Flanges Available Crispin Since 105 sales@crispinvalve.com Universal Air Release s Universal Air Release UL SERIES
More informationcs200 series commercial / Industrial pressure reducing regulators
November 2013 cs200 series commercial / Industrial pressure reducing regulators P1188 Figure 1. Typical CS200 Series Pressure Reducing Regulator Features and Benefits Wide Range of Body Sizes and End Connections
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationBaumann Pneumatic Pressure Controller (for Industrial and Sanitary Applications)
Bulletin Baumann 96000 Pneumatic Pressure Controller Baumann 96000 Pneumatic Pressure Controller (for Industrial and Sanitary Applications) The Baumann 96000 Pressure Controller is a very rugged instrument
More informationSV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
More information