quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
|
|
- Suzan Bryan
- 6 years ago
- Views:
Transcription
1 HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM OPERTING TEMPERTURE 3600 psi V FTORS * Other lloys available - consult factory. HOKE Inc. PO ox 4866 Spartanburg, S Phone (864) Fax (864) Sales-hoke@circor.com Features & enefits Leak tight sealing is achieved through multiple o-ring seals located in the couplers. Viton is standard. Poppet valves with dependable, integral o-ring seals are standard in coupler and plug in doubleend-shutoff applications. In single-end-shutoff applications the poppet valve is installed in the body half. Valve guides align valves exactly to the coupler s valve seat preventing chance of leakage when in a disconnected mode. Locking mechanisms in bodies provide smooth positive sleeve engagement. firm grip of the plug portion of the coupling assembly is assured with HOKE s Xylan -coated stainless locking tabs. 36 stainless steel springs GYROLOK nut and ferrule system provides leaktight end connection. Keyed sleeves for all sizes HOKE HQ Series quick couplers are interchangeable with Swagelok and Parker. Special High Tolerance NPT Thread quick couplings
2 HQ Series Instrumentation Quick ouplings Rated Working Pressure (psi) STINLESS STEEL PRODUTS ODY SIZE ¼ 3 8 ½ ONNETED POSITION DISONNETED POSITION ONNET UNDER PRESSURE Spillage/ir Inclusion IR INLUSION SPILLGE HQ4 0.3 cm3 0.3 cm3 HQ6.0 cm3.0 cm3 HQ8 3.0 cm3 3.0 cm3 Materials of onstruction STINLESS STEEL PRODUTS MHINED PRTS Stainless Steel ISI type 36 SPRING ND RETINING RINGS Stainless Steel ISI type 36 SELS O-rings: Viton is standard +0 F to +400 F Standard seal lubrication is Krytox. Spider Poppet 3 O-ring 4 Retaining ring 5 Locking tabs 6 Plug seal 7 Poppet guide 8 O-rings 9 ody 0 GYROLOK front ferrule GYROLOK rear ferrule GYROLOK nut 3 Spring 4 O-ring 5 Poppet 6 ody housing 7 ody seat 8 ody sleeve 9 Plug sleeve 0 Spring Plug Flow HQ4 SERIES Max. onnect/disconnect: 50 psig Flow Rate of Water in GPM (68 F) HQ6 SERIES Max. onnect/disconnect: 50 psig Flow Rate of Water in GPM (68 F) HQ8 SERIES Max. onnect/disconnect: 50 psig Flow Rate of Water in GPM (68 F) Pressure Drop in PSI ¼" DESO SESO Pressure Drop in PSI /8" DESO SESO Pressure Drop in PSI ½" DESO SESO SFM 80 psig Inlet Pressure SFM 80 psig Inlet Pressure SFM 80 psig Inlet Pressure DESO v =.3 SESO v =.45 MXIMUM FLOW RTE 4 GPM DESO v =.53 SESO v =.74 MXIMUM FLOW RTE 6 GPM DESO v =.6 SESO v =.86 MXIMUM FLOW RTE 0 GPM HQ Series Instrumentation Quick ouplings
3 HQ Series Instrumentation Quick ouplings Dimensions: ody ssemblies with Valves SERIES ODY SIZE TUE SIZE PRT NO. HEX HQ4 ¼ 8 HQ HQ4 ¼ ¼ HQ HQ4 ¼ 6mm HQ4--6M mm 6.0mm.4mm HQ HQ HQ mm HQ6--0M mm 9.mm 5.4mm HQ8 ½ ½ HQ HQ8 ½ mm HQ8--M mm 3.9mm 8.7mm SERIES ODY SIZE THRED PRT NO. HEX HQ4 ¼ 8 NPT HQ4--M HQ4 ¼ ¼ NPT HQ4--4M HQ4 ¼ ¼ SPT HQ4--4MT HQ6 3 8 ¼ NPT HQ6--4M HQ NPT HQ6--6M HQ SPT HQ6--6MT HQ8 ½ ½ NPT HQ8--8M HQ8 ½ ½ SPT HQ8--8MT SERIES ODY SIZE THRED PRT NO. HEX HQ4 ¼ 8 NPT HQ4--F HQ4 ¼ ¼ NPT HQ4--4F HQ4 ¼ ¼ SPT HQ4--4FT HQ6 3 8 ¼ NPT HQ6--4F HQ NPT HQ6--6F HQ SPT HQ6--6FT HQ8 ½ ½ NPT HQ8--8F HQ8 ½ ½ SPT HQ8--8FT ulkhead SERIES ODY SIZE TUE SIZE PRT NO. HEX HQ4 ¼ ¼ HQ HQ4 ¼ 6mm HQ4--6M mm 6.0mm.4mm HQ HQ HQ mm HQ6--0M mm 9.mm 5.4mm H T Note: ll dimensions in inches unless specified as mm (millimeters). ulkhead For H and T dimensions, see page 5 HQ Series Instrumentation Quick ouplings
4 HQ Series Instrumentation Quick ouplings Dimensions: Plugs, Non-valved, Single End Shutoff (SESO) SERIES ODY SIZE TUE SIZE PRT NO. HEX HQ4 ¼ 8 HQ4-S HQ4 ¼ ¼ HQ4-S HQ4 ¼ 6mm HQ4-S-6M mm 4.mm 5.7mm HQ HQ6-S HQ mm HQ6-S-0M mm 9.mm 8.8mm HQ8 ½ ½ HQ8-S HQ8 ½ mm HQ8-S-M mm.4mm.4mm SERIES ODY SIZE THRED PRT NO. HEX HQ4 ¼ 8 NPT HQ4-S-M HQ4 ¼ ¼ NPT HQ4-S-4M HQ4 ¼ ¼ SPT HQ4-S-4MT HQ6 3 8 ¼ NPT HQ6-S-4M HQ NPT HQ6-S-6M HQ SPT HQ6-S-6MT HQ8 ½ ½ NPT HQ8-S-8M HQ8 ½ ½ SPT HQ8-S-8MT SERIES ODY SIZE THRED PRT NO. HEX HQ4 ¼ 8 NPT HQ4-S-F HQ4 ¼ ¼ NPT HQ4-S-4F HQ4 ¼ ¼ SPT HQ4-S-4FT HQ6 3 8 ¼ NPT HQ6-S-4F HQ NPT HQ6-S-6F HQ SPT HQ6-S-6FT HQ8 ½ ½ NPT HQ8-S-8F HQ8 ½ ½ SPT HQ8-S-8FT ulkhead SERIES ODY SIZE TUE SIZE PRT NO. HEX HQ4 ¼ ¼ HQ4-S HQ4 ¼ 6mm HQ4-S-6M mm 4.mm 5.7mm HQ HQ6-S HQ mm HQ6-S-0M mm 9.mm 8.8mm T ulkhead For H and T dimensions, see page 5 H Hose arb SERIES ODY SIZE HOSE PRT NO. HEX HQ HQ6-S-6H Note: ll dimensions in inches unless specified as mm (millimeters). Hose arb HQ Series Instrumentation Quick ouplings 3
5 HQ Series Instrumentation Quick ouplings Dimensions: Plugs, Valved, Double End Shutoff (DESO) SERIES ODY SIZE TUE SIZE PRT NO. HEX HQ4 ¼ 8 HQ4-D HQ4 ¼ ¼ HQ4-D HQ4 ¼ 6mm HQ4-D-6M mm 4.mm 5.7mm HQ HQ6-D HQ mm HQ6-D-0M mm 9.mm 8.8mm HQ8 ½ ½ HQ8-D HQ8 ½ mm HQ8-D-M mm.4mm.4mm SERIES ODY SIZE THRED PRT NO. HEX HQ4 ¼ 8 NPT HQ4-D-M HQ4 ¼ ¼ NPT HQ4-D-4M HQ4 ¼ ¼ SPT HQ4-D-4MT HQ6 3 8 ¼ NPT HQ6-D-4M HQ NPT HQ6-D-6M HQ SPT HQ6-D-6MT HQ8 ½ ½ NPT HQ8-D-8M HQ8 ½ ½ SPT HQ8-D-8MT SERIES ODY SIZE THRED PRT NO. HEX HQ4 ¼ 8 NPT HQ4-D-F HQ4 ¼ ¼ NPT HQ4-D-4F HQ4 ¼ ¼ SPT HQ4-D-4FT HQ6 3 8 ¼ NPT HQ6-D-4F HQ NPT HQ6-D-6F HQ SPT HQ6-D-6FT HQ8 ½ ½ NPT HQ8-D-8F HQ8 ½ ½ SPT HQ8-D-8FT ulkhead SERIES ODY SIZE TUE SIZE PRT NO. HEX HQ4 ¼ ¼ HQ4-D HQ4 ¼ 6mm HQ4-D-6M mm 4.mm 5.7mm HQ HQ6-D HQ mm HQ6-D-0M mm 9.mm 8.8mm H Note: ll dimensions in inches unless specified as mm (millimeters). T ulkhead For H and T dimensions, see page 5 4 HQ Series Instrumentation Quick ouplings
6 HQ Series Instrumentation Quick ouplings HOKE olor-oded Keyed Quick ouplers HOKE keyed quick couplers will fit only mating keyed components, preventing accidental mixing of fluid or pressure lines. ody and plug assemblies are numbered and color-coded for positive identification. HOKE keyed HQ Series quick couplers are interchangeable with Swagelok and Parker components of the same style. For example, the HOKE K body sleeve will fit a Swagelok K plug sleeve of the same size. KEY NUMER HQ4 HQ6 HQ8 ODY SLEEVE O.D. PLUG SLEEVE O.D. ODY SLEEVE O.D. PLUG SLEEVE O.D. ODY SLEEVE O.D. PLUG SLEEVE O.D. OLOR K lack K Orange K3 Green K4 Yellow K5 lue K6 White K7 Purple K8 rown Keys K K5 are standard stock items. For keys K6 K8, consult the factory. Panel Mount Dimensions from ulkhead drawings on pages, 3, and 4 ULKHED SIZE H PNEL HOLE T PNEL THIKNESS 8 GYROLOK max. HQ4 ¼ GYROLOK max. 6mm GYROLOK.9mm 6.3mm max ¼ GYROLOK max. HQ6 3 8 GYROLOK max. 0mm GYROLOK 5.mm 6.9mm max. HQ8 ½ GYROLOK max. HQ Series Instrumentation Quick ouplings 5
7 HQ Series Instrumentation Quick ouplings How to Order Standard items in bold. HQ4 4 F K ODY SIZE HQ4 ¼ HQ6 3 8 HQ8 ½ OMPONENT ody ulkhead body D Plug valved D Plug valved bulkhead S Plug non-valved S Plug non-valved bulkhead PORT SIZE 8 6M0 6mm 4 ¼ 8M0 8mm M0 0mm 8 ½ M0 mm Standard seal lubricant is Krytox. SEL OPTIONS lank Standard seal (Viton ) 03 Kalrez 04 Ethylene Propylene 05 una N 06 Neoprene MTERILS 36 Stainless steel OPTIONS lank No options Oxygen clean K K8 Keyed sleeves (see page 6) PORT ONFIGURTIONS lank fitting F Female NPT FT Female ritish taper pipe H Hose barb M Male NPT MT Male ritish taper pipe ccessories Dust aps SERIES ODY SIZE PRT NO. HEX HQ4 ¼ HQ HQ6 3 8 HQ HQ8 ½ HQ Dust Plugs SERIES ODY SIZE PRT NO. HEX HQ4 ¼ HQ4-P HQ6 3 8 HQ6-P HQ8 ½ HQ8-P For Your Safety It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage. 6 HQ Series Instrumentation Quick ouplings Xylan is a registered trademark of Whitford orporation. GYROLOK is a registered trademark of HOKE Incorporated. Kalrez and Viton are registered trademarks of DuPont Dow Elastomers. Krytox is a registered trademark of the DuPont ompany. Swagelok is a registered trademark of Swagelok ompany. Parker is a registered trademark of Parker Hannifin orporation
8 HQ Notes Series Instrumentation Quick ouplings HQ Series Instrumentation Quick ouplings 7
9 HQ Notes Series Instrumentation Quick ouplings 8 HQ Series Instrumentation Quick ouplings
10 IROR Instrumentation Technologies (IT) is the logical choice for fluid control solutions. We provide the lowest cost of ownership, offering the best in class reliability and availability of our products. We have global coverage, delivering value in the form of local, flexible service to meet our customer s needs. IT is a product group specializing in instrumentation with orifice sizes typically up to. PO ox 4866 Spartanburg, S Tel Fax Sales-hoke@circor.com Our headquarters and ISO 900:008 certified manufacturing facilities are located at 405 entura ourt Spartanburg, S, US, Proudly Distributed y: 79600ENG 07/ PS346
Instrumentation. Quick Couplings QUALITY VALUE SELECTION
Instrumentation Quick ouplings QULITY VLUE SELETION TOMO IP QUIK OUPLINGS TOMO s sole purpose is to provide the instrumentation, automation, and chemical process valve and fitting industry with a high
More informationfluid control Fluid Control Components Index
Fluid ontrol omponents Index VH Series 1 heck valves XVH Series 5 Excess flow valves 6100/6200 Series 13 heck valves 691F Series 16 heck valves R6000 Series 18 djustable relief valves 6600 Series 24 leed
More informationspun sampling cylinders
HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com spun sampling cylinders 316 Stainless Steel DOT Series Typical Applications Sampling
More informationinstrumentation ball valves
7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com instrumentation
More informationinstrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
More informationmetering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
More informationfluid control Fluid Control Components Index 6100/6200 Series 1 Check valves 691F Series 5 Check valves CVH Series 7 Check valves
Fluid ontrol omponents Index 6100/6200 Series 1 heck valves 691F Series 5 heck valves VH Series 7 heck valves XVH Series 13 Excess flow valves 6500 Series 19 djustable relief valves 6600 Series 21 leed
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationQuick-Connects. QC, QF, QM, and QTM Series. No twisting, turning, or wrenching necessary
www.swagelok.com Quick-Connects QC, Q, QM, and QTM No twisting, turning, or wrenching necessary Single-end shutoff, double-end shutoff, and full-flow models 2 Quick-Connects Contents Instrumentation Quick-Connects
More informationpackless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE Inc.
More informationSpace Saver. Space Saver Actuators. Air Actuated 0700 Series
Actuators Air Actuated 0700 Series HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com Space Saver Air Actuated
More informationCouplings - Quick Disconnect
ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial
More informationPneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
More informationQuick-connects. QC, QF, QV and QM Series.
Quick-connects QC, Q, QV and QM ITOK Group ITOK Gmb (eadquarter) Sprendlinger andstr. 5, 309 Offenbach am Main, Germany Tel.: +9 9 900 9 ax: +9 9 900 95 ITOK, Inc. 33 North Promenade lvd., Suite 750, Stafford,
More informationball valves ball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves
7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves HOKE s 7 Series Fire Safe Valves meet demanding application requirements in the production environment of chemical and petrochemical processing facilities.
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationactuators Electric Actuators
Electric Actuators Index 90 Unidirectional 4 Actuators for 2 and 4 Way Ball Valves 180 Unidirectional 6 Actuators for 3 Way Ball Valves 90 Unidirectional Reversible 8 Actuators for 3 Way Ball Valves 4
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationball valves General Purpose Ball Valves
General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves Rotoball 72 Series 9 2-Way valves Ultramite 70 Series 12 2- & 3-Way valves Selectomite 71 & 76 Series 19 3-Way Ball Valves
More informationQuick-Connects. QC, QF, QM, and QTM Series. No twisting, turning, or wrenching necessary. Single-end shutoff, double-end shutoff, and full-flow models
Quick-Connects QC, Q, QM, and QTM 1 www.swagelok.com Quick-Connects QC, Q, QM, and QTM No twisting, turning, or wrenching necessary Single-end shutoff, double-end shutoff, and full-flow models 2 Hose,
More informationInline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
More informationParker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker Autoclave Engineers: Fluid omponents Product atalog February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034
More informationBellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
More informationD-Pro Check Valves. SS316: 2000 psig (137 bar) Brass: 1500 psig (103 bar)
DPro V, VP, VA, V6 and V6 Series Fixed and Adjustable cracking pressure Pressures up to (6 ) and 6 (4 ) Catalog No V66. May 8 Features Fixed and adjustable cracking pressure. Reliable DKOK Tube Fitting,
More informationMETERING VALVES H1300 SERIES.
METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationQuick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power and inst
Instrumentation Quick ouplings 1 Parker Hannifin orporation Quick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
More informationFormed Sampling Cylinders and Accessories Index amp ling cylinde HOKE Inc.
Formed Sampling Cylinders and Accessories Index Sampling Cylinders 2 Design, Features, Applications Cylinder Accessories 3 Collars, Flanges, Caps, Carrying Handles Safety Relief Devices Cylinder Valves
More informationCheck Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
More informationTable of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
More informationCheck Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationCheck Valves (CO Series) Catalog 4130-CO Revised, June 2001
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
More informationFlanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings
s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings
More informationO-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
More informationinstrumentation ball valves
7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com instrumentation
More information500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
More informationQuick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
More informationNon-Spill Couplings zfc42 NS Series. Hydraulic Quick Couplings. B Hydraulics. Features. Applications. Note. Performance. Specifications B-20
Non-Spill ouplings zfc NS Series 8 7 pplications Non-Spill couplings by Parker are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly
More informationcheck valves BIVCO Check Valves
BIVCO valves are considered all-purpose valves because they can be tailored in the right combination of materials for the job at hand for liquids, including acids, alkalais, formaldehyde, solvents, oils,
More informationDiaphragm Valves. LD Series. Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service
www.swagelok.com Diaphragm Valves LD Series Working pressures up to 300 psig (20.6 bar) Shutoff, bulk-gas distribution, and isolation service Cast, forged, and bar stock stainless steel body material 1/4
More information5100 Series Inline Relief Valve 10 to 2,400 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 5100 Series Inline Relief Valve 10 to 2,400 PSIG Features Zero Leakage to 95% of Cracking Pressure Positive Reseal
More informationInstrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
More informationRL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by t
Relief Valves (RL4 Series) Catalog 411-RL Revised, July 2001 RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted
More informationISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
More informationQuick Coupling Products
Quick oupling Products atalog 3800 US February 2005 The World Standard Parker Locations Minneapolis, Minnesota rantsburg, Wisconsin Lincoln, Nebraska hetek, Wisconsin FILURE OR IMPROPER SELETION OR IMPROPER
More informationHi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
More informationRotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
More informationSnap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage 8- Series For Pressures to 0 psi ( bar) 9 Series For Pressures to 0 psi ( bar) Featuring: Low pressure
More informationHOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
More informationPFA Needle Valves. 4RP Series
PFA Needle Valves 4RP Series High-purity PFA material Pressures up to 180 psig (12.4 bar) Temperatures up to 300 F (148 C) 1/4, 3/8, and 1/2 in. Swagelok PFA tube fitting end connections www.swagelok.com
More informationVCR Metal Gasket Face Seal Fittings
lloy 2507 Super uplex Weld Fittings 1 www.swagelok.com Metal Gasket Face Seal Fittings WL 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Weld,,
More informationBC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationQ U I C K C O U P L I N G S, C O U P L E R A D A P T E R S & R E P L A C E M E N T T I P S Engineered, Machined and Assembled in the USA Since 1969
Q U I C K C O U P L I N G S, C O U P L E R A D A P T E R S & R E P L A C E M E N T T I P S Engineered, Machined and Assembled in the USA Since 1969 warning statement! WARNING Failure, improper use or improper
More informationParker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker utoclave Engineers: Fluid omponents Product February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since
More informationCheck Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples Medium s to 20,000 psi (1379 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationFittings and Tubing QS Series
Fittings and Tubing QS Series Medium Since 1945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned
More informationHigh-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability
High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076
More informationQSS: Quick Set System. Product Catalog Compression Sleeve Valves and Fittings to 15,000 psi (1034 bar)
QSS: Quick Set System Product Catalog Compression Sleeve Valves and Fittings to psi (1034 bar) Section Page Introduction.............................. 2 QS Needle Valves........................... 4 QS
More informationEmergency Shear Valves
Emergency Shear Valves 0060 Underpump Emergency Valve The Emco Wheaton 0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationHydraulic. Quick Couplings
Hydraulic Quick ouplings -1 Introduction ouble Shut-Off and Straight-Thru ouplings Parker hydraulic couplings have a wide variety of designs, each tailored to a particular application or use. This catalog
More information197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
More informationRelief Valves. Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
More informationCheck Valves. E Check Valves E-1. Quick Coupling Division 8145 Lewis Road Minneapolis, MN
Check Valves E-1 Check Valves Introduction Multiple Hydraulic System pplications Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage
More informationFittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)
ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
More informationSwagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
More information74 Series ISO Interchange
Series ISO 8 Interchange Featuring Snap-tite quality with superior pressure and flow characteristics over the competition. Flush Face/Dry Break design facilitates easy cleaning prior to connection High
More informationQuick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA July 202 Locations Grantsburg, WI Chetek, WI FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationspun sampling cylinders
HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com spun sampling cylinders 316 Stainless Steel DOT Series
More informationQuick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 2014 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER
More informationRelief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
More informationCatalog Pnuematic Couplings
Industrial Interchange Nipples A-A-59439, MIL- C-4109F Design Non-valved, straight through Pioneer Industrial Interchange Nipples are compatible for use with 20 Series, HF Series, Universal or E-z-mate
More informationScrewed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
More informationPlug Valves. P4T and P6T Series. Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections
Plug Valves P4T and P6T Series 1 www.swagelok.com Plug Valves P4T and P6T Series Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections 1/8 through
More informationQuick Disconnect Couplings for
Quick Disconnect ouplings for Featuring hemquik High Purity ouplings Photo older Products ompany This hemical Management catalog features older Products most popular and sophisticated products, designed
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,
More informationWALL MOUNTED GAS BOILER. Models OLSSC-050 OLSSC-075 OLSSC-100 OLSSC-150 OLSSC-200 PARTS, KITS & OPTIONAL ACCESSORIES
Models OLSS-050 OLSS-075 OLSS-100 OLSS-150 OLSS-200 WLL MOUNTED GS OILER PRTS, KITS & OPTIONL ESSORIES H n ISO 9001-2008 ertified ompany 2201 Dwyer venue, Utica NY 13504-4729 web site: www.ecrinternational.com
More informationneedle valve 2219 Series Severe Service Needle Valves
2219 Series Severe Service Needle Valves HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com needle valve 2219
More informationHOKE. Needle. Valves. Union Bonnet. Severe Service. Needle DYNA-PAK STEM PACKING SYSTEM PROCHEM INSTRUMENTATION HOKE INSTRUMENTATION VALVES
PROHM INTRUMNTTION HOK INTRUMNTTION VLV HOK Needle Valves Needle evere ervice Union onnet HOK valves are available with GYROLOK compression fitting ends HOK manufactures a complete line of precision needle
More informationHigh Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
More informationPiston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
More informationSliding Seal & Brass Poppet Valves
Sliding Seal & rass Poppet Valves anually Operated Section PL / VL Series... 2-3 HV Valve... 4-5 Hand Operated Valves,... 6-7 utton Operated Valves...8 Hand / Cam utton Valves...9 leed Valve...10 old text
More informationFor High Pressure Applications
For High Pressure pplications SELEXCEL Swivels joints have been carefully designed and manufactured with continuous research and development backing to very close tolerances under rigid quality control
More informationA World Class Tradition of Quality
Snap-tite offers a full line of NGV1 fueling products. A World Class Tradition of Quality 2 Snap-tite Quality, Safety, Ingenuity F ounded over 65 years ago, Snap-tite has grown into a corporation producing
More informationHigh-Pressure Needle Valves
www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design
More informationB Style Electric Motors and Valves
Style Electric Motors and Valves Shutoff/ontrol Motors oom ontrol motors are 22 RPM for 344 series (0.7 second shutoff valves) and 25 RPM for 346 and 356 series (0.6 second shutoff valves) for 12 VD systems.
More informationLocked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
More informationFlow Controls & Accessories
Flow ontrols & ccessories Section V V Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Miniature Right ngle...6 3251 Series...7 FM701 & FM703 Series...8 F701, F702, FS701 Series...9
More informationValve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
More informationISO Wafer Check Valves. Full Port Lowest Pressure Drop. Maximizing the Flow
ISO 9001-2008 Wafer Check Valves Full Port Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port Wafer Check Valves provide more
More informationGyrolok Flareless Tube Fittings Tubing Data Charts
Gyrolok Flareless Tube Fittings Data Charts DESIGN HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities.
More informationTubing Cutter for 1/16" Stainless Steel Tubing
Delivery Tubing and ccessories 311 P000257 Tubing Cutter for 1/16" Stainless Steel Tubing 58692-U Low-cost tool cuts 1/16" stainless steel tubing without obstructing the bore. Easily cut 1/16" OD stainless
More information