instrumentation ball valves
|
|
|
- Priscilla Carroll
- 5 years ago
- Views:
Transcription
1 7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC Phone (864) Fax (864) sales@hoke.com instrumentation ball valves
2 7G Series 2 and 3-way Ball Valves Multi-directional Flow Typical Applications Hydraulic test stands High pressure test stands Viscous media handling Gas and liquid applications Pilot plants in refineries and chemical plants Measurement and regulating equipment Technical Data BODY MATERIAL 316 stainless steel MAXIMUM OPERATING PRESSURE 3000 psig (207 barg) PROOF PRESSURE SAFETY FACTOR 2:1 BURSTING PRESSURE SAFETY FACTOR 4:1 TEMPERATURE RANGE ORIFICE SIZES INSTRUMENT PANEL DIAMETER* INSTRUMENT PANEL THICKNESS* -20 F to +475 F (-29 C to +232 C) (4mm) to (8mm) 0.80 (20mm) 0.24 (6mm) * Panel mount not available for ½ and 18mm fittings ** Contact factory for other seat materials HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC Phone (864) Fax (864) sales@hoke.com Features Floating ball valve provides shut off or controls flow directions (3-way) Panel mounting is standard for all end fitting sizes except ½ and 18mm end connections Reliable housing construction incorporates metal seals Dyna-Pak packing provides a leak-tight seal with low operating torque in vacuum or high pressure applications, helping to prevent fugitive emissions Handle points to port in use or to closed position, providing a visual cue and improved safety Multi-directional flow throughout entire operating pressure range Fractional Gyrolok and female NPT end fittings up to ½ ; metric Gyrolok up to 18mm Pressure assisted sealing, no sealing adjustment required Virgin TFE seat and seal design** Special High Tolerance NPT Thread instrumentation ball valves
3 7G 2-way Ball Valves Bi-directional Flow Materials and Dimensions 2.00 (50.8 mm) 0.70 (17.8 mm) 1 "E" "D" "C" ¼ Gyrolok and 6mm end fittings only "A" - TUBE TO TUBE "B" - FINGER TIGHT GYROLOK Materials of Construction DESCRIPTION MATERIAL RED LEVER HANDLE Nylon 2 HANDLE PIN 316 stainless steel 3 STEM ASSEMBLY 316 stainless steel, Teflon 4 BODY 316 stainless steel 5 PANEL NUT 316 stainless steel 6 6 PIN 316 stainless steel 7 BALL 316 stainless steel 8 END FITTING 316 stainless steel 9 SEAT Virgin TFE 10 WASHER* 316 stainless steel 11 NUT & FERRULE SET 316 stainless steel * ¼ Gyrolok and 6mm end fittings only F G Dimensions INLET F / OUTLET G A B C D E ORIFICE CV ¼ FEMALE NPT NA 2.08 (53mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) FEMALE NPT NA 2.78 (71mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) 2.45 ½ FEMALE NPT NA 3.22 (82mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) 2.45 ¼ GYROLOK 1.97 (50mm) 3.24 (82mm).87 (22mm) 0.43 (11mm) 1.92 (49mm) (4.8mm) GYROLOK 2.01 (51mm) 3.43 (87mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (7.2mm) 1.12 ½ GYROLOK 1.84 (47mm) 3.80 (96mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) mm GYROLOK 1.98 (50mm) 3.24 (82mm) 0.87 (22mm) 0.51 (13mm) 1.92 (49mm) (4.0mm) mm GYROLOK 2.02 (51mm) 3.31 (84mm) 1.02 (26mm) 0.43 (11mm) 2.01 (51mm) (8.0mm) mm GYROLOK 1.97 (50mm) 3.36 (85mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) mm GYROLOK 1.79 (46mm) 3.65 (93mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) mm GYROLOK 1.87 (47mm) 3.92 (100mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) G Series 3
4 7G 3-way Ball Valves Multi-directional Flow Materials and Dimensions 1.00 (25.4mm) 1.00 (25.4mm) F INLET OUTLET ¼ Gyrolok and 6mm end fittings only 7 10 A - TUBE TO TUBE B - FINGER TIGHT Materials of Construction DESCRIPTION MATERIAL LEVER HANDLE Nylon 2 HANDLE PIN 316 stainless steel 3 STEM ASSEMBLY 316 stainless steel, Teflon 6 4 BODY 316 stainless steel 5 PANEL NUT 316 stainless steel 6 PIN 316 stainless steel 7 BALL 316 stainless steel 8 END FITTING 316 stainless steel 9 SEAT Virgin TFE 10 WASHER* 316 stainless steel H J 11 NUT & FERRULE SET 316 stainless steel * ¼ Gyrolok and 6mm end fittings only J Dimensions INLET H / OUTLET J A B C D E ORIFICE Cv ¼ FEMALE NPT NA 2.08 (53mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) FEMALE NPT NA 2.78 (71mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) 2.45 ½ FEMALE NPT NA 3.22 (82mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) 2.45 ¼ GYROLOK 1.97 (50mm) 3.24 (82mm) 0.87 (22mm) 0.43 (11mm) 1.92 (49mm) (4.8mm) GYROLOK 2.01 (51mm) 3.43 (87mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (7.2mm) 1.12 ½ GYROLOK 1.84 (47mm) 3.80 (96mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) mm GYROLOK 1.98 (50mm) 3.24 (82mm) 0.87 (22mm) 0.51 (13mm) 1.92 (49mm) (4.0mm) mm GYROLOK 2.02 (51mm) 3.31 (84mm) 1.02 (26mm) 0.43 (11mm) 2.01 (51mm) (8.0mm) mm GYROLOK 1.97 (50mm) 3.36 (85mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) mm GYROLOK 1.79 (46mm) 3.65 (93mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) mm GYROLOK 1.87 (47mm) 3.92 (100mm) 1.02 (26mm) 0.51 (13mm) 2.01 (51mm) (8.0mm) G Series
5 7G 2 and 3-way Ball Valves Multi-directional Flow Pressure Temperature Curve PSI BAR Dyna-Pak Stem Packing F C How to Order Valve Series 7G2 2-way 7G4 3-way 7G2 210 F4 Y MM FOR YOUR SAFETY IT IS SOLELY THE RESPONSIBILITY OF THE SYSTEM DESIGNER AND USER TO SELECT PRODUCTS SUITABLE FOR THEIR SPECIFIC APPLICATION REQUIREMENTS AND TO ENSURE PROPER INSTALLATION, OPERATION AND MAINTENANCE OF THESE PRODUCTS. MATERIAL COMPATIBILITY, PRODUCT RATINGS AND APPLICATION DETAILS SHOULD BE CONSIDERED IN THE SELECTION. IMPROPER SELECTION OR USE OF PRODUCTS DESCRIBED HEREIN CAN CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. Metric MM Specify for GYROLOK metric only* (fractional sizes leave blank) Inlet/Outlet F4 ¼ female NPT F6 3 8 female NPT F8 ½ female NPT G4 ¼ GYROLOK G6 3 8 GYROLOK G8 ½ GYROLOK G6 6mm GYROLOK G8 8mm GYROLOK G10 10mm GYROLOK G12 12mm GYROLOK G18 18mm GYROLOK (2-way Only) 7G Series 5
6 7G Series 2 and 3-way Ball Valves; Multi-directional Flow Notes 6 7G Series
7 7G Series 2 and 3-way Ball Valves; Multi-directional Flow Notes 7G Series 7
8 CIRCOR Instrumentation Technologies (CIT) is the logical choice for fluid control solutions. We provide the lowest cost of ownership, offering the best in class reliability and availability of our products. We have global coverage, delivering value in the form of local, flexible service to meet our customer s needs. CIT is a product group specializing in instrumentation with orifice sizes typically up to 2. Our corporate head office and ISO 9001:2000 registered manufacturing facilities are located at 405 Centura Court Spartanburg, SC, USA, Tel Fax Proudly Distributed By: 79068ENG 07/12 APS2601
instrumentation ball valves
7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com instrumentation
Space Saver. Space Saver Actuators. Air Actuated 0700 Series
Actuators Air Actuated 0700 Series HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com Space Saver Air Actuated
spun sampling cylinders
HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com spun sampling cylinders 316 Stainless Steel DOT Series Typical Applications Sampling
needle valve 2219 Series Severe Service Needle Valves
2219 Series Severe Service Needle Valves HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com needle valve 2219
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
actuators Electric Actuators
Electric Actuators Index 90 Unidirectional 4 Actuators for 2 and 4 Way Ball Valves 180 Unidirectional 6 Actuators for 3 Way Ball Valves 90 Unidirectional Reversible 8 Actuators for 3 Way Ball Valves 4
metering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
ball valves General Purpose Ball Valves
General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves Rotoball 72 Series 9 2-Way valves Ultramite 70 Series 12 2- & 3-Way valves Selectomite 71 & 76 Series 19 3-Way Ball Valves
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Formed Sampling Cylinders and Accessories Index amp ling cylinde HOKE Inc.
Formed Sampling Cylinders and Accessories Index Sampling Cylinders 2 Design, Features, Applications Cylinder Accessories 3 Collars, Flanges, Caps, Carrying Handles Safety Relief Devices Cylinder Valves
spun sampling cylinders
HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com spun sampling cylinders 316 Stainless Steel DOT Series
ball valves ball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves
7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves HOKE s 7 Series Fire Safe Valves meet demanding application requirements in the production environment of chemical and petrochemical processing facilities.
packless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE Inc.
quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
Gyrolok Flareless Tube Fittings Tubing Data Charts
Gyrolok Flareless Tube Fittings Data Charts DESIGN HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities.
condensed catalog HOKE Condensed Catalog Index
HOKE Condensed Catalog Index Needle Valves 1 Metering Valves 3 Ball Valves 4 Actuated Ball Valve Packages 7 Plug Valves 8 Fluid Control Components 9 Packless Valves 11 Manifolds 13 Sampling Cylinders 14
condensed catalog HOKE Condensed Catalog
HOKE Condensed Catalog Index Needle Valves1 Metering Valves 3 Ball Valves 5 Actuated Ball Valve Packages 7 Plug Valves 8 Fluid Control Components 9 Packless Valves Manifolds1 3 Sampling Cylinders1 4 Analytical
pressure regulators Back Pressure Regulators
Back Pressure Regulators Index BP-3 Series 1 BP-6 Series 4 BP-8 Series 7 BP-8LF Series 10 CBP-3 Series 13 LB-1 Series 16 SBPR Series 19 BP-60 Series 22 BP-66 Series 25 GO Regulator 405 Centura Court PO
High Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
Locked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
HOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
Plug Valves. PV Series. End Connections: 1/8 to 1/2 in. (6 to 12mm) Working Pressure: Up to 3,000 psig (200 bar)
Plug Valves PV Series Working Pressure: Up to,000 psig (00 bar) Temperature Range: -0 to 00 F (- to 0 C) Flow Coefficient: Up to 6. End Connections: /8 to / in. (6 to mm) Wide variety of end connection
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
One-Piece Encapsulated Ball Valves
One-Piece Encapsulated Ball Valves EB Series Working Pressure: up to 3000 psig (206 bar) End Connections: 1/16 to 3/4 in. (3 to 12 mm) Temperature Range: -65 to 300 F (-53 to 148 C) 2-way, Angle and 3-way
Solution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof The Best Partner Flow & Control Solution Partner for Value Creation Ball Valves SBV SBV30 SBV60 SFBV60 SBVSeries For
HIGH PRESSURE TRUNNION BALL VALVES TBV SERIES
HIGH PREURE TRUNNION BALL VALVE TBV ERIE TBV FEATURE On/Off-service ball valve with 2-way pattern Diverter, selector and on/off-service ball valve with 3-way pattern MAWP* 10,000 psi (689 bar) with PEEK
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动
DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents
BALL VALVES - VB3 Series
1 Piece Integral Stem Materials of Construction No. Description Body Material 1 Handle Directional Handle Materials Nylon Panel Mountable Nut Various End Connections & Sizes Compact 1 Piece Body BALL VALVES
High Pressure Ball Valves. Ball Valves
High Pressure 79 Valve Options Reliable, simple, operation for onoff service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum turbulence
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
Swagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
METERING VALVES H1300 SERIES.
METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F
Swagelok Alternative Fuel Service (AFS) Ball Valves
Swagelok Alternative Fuel Service () Ball Valves 461 Swagelok Alternative Fuel Service () Ball Valves For High-Pressure, High-Flow Applications Swagelok Ball Valves Working pressures up to 6000 psig (413
Tr unnion Ball Valve s
www.swagelok.com Tr unnion Ball Valve s 83 Series and H83 Series Working pressures up to 10 000 psig (689 bar) 1/8 to 1/2 in. and 6 to 12 mm Swagelok tube fitting or NPT end connections 316 stainless steel
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT SERIES Features Full Port Lead Free Brass Diverter Valve Spring return or double acting actuators Ball Valve direct mounted
fluid control Fluid Control Components Index
Fluid ontrol omponents Index VH Series 1 heck valves XVH Series 5 Excess flow valves 6100/6200 Series 13 heck valves 691F Series 16 heck valves R6000 Series 18 djustable relief valves 6600 Series 24 leed
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT Features Industrial quality miniature actuator Full Port direct mount 3-way stainless steel ball valve
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design
Plug Valves. P4T and P6T Series. Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections
Plug Valves P4T and P6T Series 1 www.swagelok.com Plug Valves P4T and P6T Series Working pressures up to 3000 psig (206 bar) Swagelok tube fitting and NPT and ISO tapered pipe end connections 1/8 through
Ball Valves (B Series) Catalog 4121-B September 1999
Ball Valves (B Series) Catalog 4121-B September 1999 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick 1/4 turn
Integral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
Trunnion Ball Valves. TB Series. Wide variety of end connection types and sizes. Flow Coefficient: up to 1.6
Trunnion Ball Valves Series Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in. (6 to 1 mm) Temperature Range: -40 to 450 F (-40 to 3 C) -way and 3-way valves Flow Coefficient:
5100 Series Inline Relief Valve 10 to 2,400 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 5100 Series Inline Relief Valve 10 to 2,400 PSIG Features Zero Leakage to 95% of Cracking Pressure Positive Reseal
CALEFFI. FLOWCAL Automatic flow balancing valve with polymer cartridge. 121 series 01141/11 NA. Function
FLOWCAL Automatic flow balancing valve with polymer cartridge 121 series REGISTERED BSI EN ISO 9001:2000 Cert. n FM 21654 UNI EN ISO 9001:2000 Cert. n 0003 CALEFFI 01141/11 NA Function The FlowCal automatic
VN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
VFDAVV 1/2 VFDAVV VACUUM VALVES. DIMENSIONS (mm)
VACUUM VALVES VFDAVV VACUUM VALVES Direct acting vacuum valves 12VDC, 24VDC, 110VAC & 230VAC 1/4 & 1/2 Ports Full size high flow orifice 3-way Operation 2-way Operation (plug exhaust port using VFBP-U02)
INSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
Electronic Ball Valve Guide Specifications
Electronic Ball Valve Guide Specifications Control Valve Assemblies Ball Valve Bodies All ball valves used for modulating or floating (tri-state) control must be furnished with a stainless steel ball &
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
R627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
Ball Valves (B Series) Catalog 4121-B Revised, November 2001
Ball Valves (B Series) Catalog 4121-B Revised, November 2001 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT SERIES Features FULL PORT 3-way L or T flow path Functions as a diverter, selector or mixing valve Four ball seat
Ball Valves 2-Way Series
Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve
Ball Valves (B Series) Catalog 4121-B January 2006
Ball Valves (B Series) Catalog 4121-B January 2006 B Series Ball Valves Catalog 4121-B Pressure vs. Temperature Pressure (psig) Temperature ( C) -54-18 10 38 66 93 121 149 177 204 232 6500 6000 448 414
Ball Valves 2-Way Series
Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve
One-Piece Ball Valves. VB2GB, VB23GB Series
One-Piece Ball Valves VB2 & VB2G Series 1/8 to 1/2 in. (3 to 12 mm OD) Up to 3000 psig (206 bar) Stainless Steel, Brass Catalog No. VB2-2 Aug. 2015 Features Directional Handle indicates flow direction.
500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
Installation, Operation & Maintenance Instructions
Installation, Operation & Maintenance Instructions 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050
Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
Technology for a Better Future. VALVES International Edition.
www.genstartech.com VALVES International Edition (Needle Valve, Metering Valve, Ball Valve, Diaphragm Valve, Gauge Valve, Check Valve, Excess Flow Valve, Relief Valve, Cylinder Valve) Technology for a
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
Recognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 Quality Service Experience www.mac-weld.com CONTENTS Introduction Page 1-2 Needle Valves Page 3-6 Gauge Valves Page
SWB 310 SERIES SWING - OUT BALL VALVES
SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable
HOKE. Needle. Valves. Union Bonnet. Severe Service. Needle DYNA-PAK STEM PACKING SYSTEM PROCHEM INSTRUMENTATION HOKE INSTRUMENTATION VALVES
PROHM INTRUMNTTION HOK INTRUMNTTION VLV HOK Needle Valves Needle evere ervice Union onnet HOK valves are available with GYROLOK compression fitting ends HOK manufactures a complete line of precision needle
Trunnion Ball Valves. TB Series. Working Pressure: up to 10,000 psig (689 bar) End Connections: 1/8 to 3/4 in.
Trunnion Ball Valves Series Working Pressure: up to 10,000 psig (689 bar) Temperature Range: -40 to 450 F (-40 to 3 C) Flow Coefficient: up to 1.6 End Connections: 1/8 to 3/4 in. (6 to 1 mm) -way and 3-way
P627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
Introduction to Inline Lubrication. Master Pneumatic
Introduction to Inline Lubrication Master Pneumatic What is the purpose of Inline Lubrication? Sentry Introduce atomized oil into the compressed air line to lubricate: Air Motors Cylinders Gears Sliding
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.
HIGH PRESSURE BAR STOCK BA VAVES VB6B Series www.unilok.com s - VB6B Series Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PTFE seats 10000psig (689bar) @21 (70 ) with optional
Toggle Valves. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
Toggle Valves OG,, and 92 1 www.swagelok.com Toggle Valves OG,, and 92 Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials 2 Needle and Metering
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
Operation and Maintenance Manual
BM / BMA Hydrometers ½ Operation and Maintenance Manual i This manual is intended for use by the users of this equipment. The information contained herein is the property of the Arad Ltd. Dalia and may
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe SERIES Features Industrial grade PVC ball valve with PTFE/EPDM seals IP67 weatherproof polyamide enclosure with
FPS Safety Shut-Off Valves. CSA and FM Approved
FPS Safety Shut-Off CSA and FM Highly Visible Beacon/Indicator FPS FPS is a leader in reliable, cost-effective shut-off valve technology. Our automatic and manual shut-off valves are in service in industries
Instrument Ball Valves
www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option
Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold