Static Pressure Manifolds M4AP and M4TP Manifolds

Transcription

1 Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold s two valves have freeswiveling, ball-ended stems or soft seats. The block valve isolates the instrument from the process and is open during normal operation. When the block valve is closed, the bleed valve can be opened to vent pressure from the transmitter. The M4AP permits the transmitter s futbol flange to connect the process signal line to the manifold directly, with either a 1/2-inch pipe or tubing connection. The M4TP has a 1 /2-inch NPT inlet connection. A 1 /4-inch NPT purge connection is available. The 1 /4-inch NPT vent port may be used for testing calibration. They may be mounted using the AGCO Mount option for ease of assembly and maintenance. Features and Benefits Cost savings when manifolding the instruments. This eliminates several parts used in conventional methods of piping up resulting in cost reduction of 2-3 percent. Compact design requires minimum space for operation and installation. Fewer leak points reduce leakage by having fewer parts to assemble. Free-swiveling ball end stem (metal seat) assures bubble-tight valve closure without seat galling. The AGCO Mount provides easy instrument removal. Direct bolting to the manifold allows the instrument to be removed independently of the piping. This facilitates repairs, service, and calibration. M4TP Immediate installation with AGCO Mount s manifold, steam block, bracket, and all associated piping can be installed without the instrument at the time of plant construction. Secure mounting is provided by the AGCO Mount. Instrument piping stability is enhanced when directly supported by the pipestand through the manifold. All valve threading is isolated. Packing is below stem threads, bodyto-bonnet seal is below the threads eliminating process fluid corrosion. Less instrument damage with the AGCO Mount. The instrument can be safely warehoused until final loop checkout, reducing the chances of damage during construction. right to change product designs and specifications without notice. 3

2 Static Pressure Manifolds M4AP Metal Seat (Soft Seat available) Dimensions, inches [mm].64 [16.3].2 [5.1] 2.12 [53.8] Full R. 4 Places.48 [12.2] TYP. 2.4 [61.] ø.48 [12.2] Mounting Holes 2 Places.81 [2.6] 1.62 [41.1] 1 /4-18 NPT B Max. Open 3.4 [86.4] Instrument Side A Max. Open 2.38 [6.4] 2.28 [57.9] 1.57 [39.9] Block/Isolate Valve.3 [7.6] 1.4 [35.6] 2.8 [71] Process Side.68 [17.3] ø.38 [9.6] Mounting Hole 3 Places Vent Valve 1 /4-18 NPT 3.75 [95.3] Dimensions, inches [mm] Packing A B Teflon [79.8] [66.] GRAFOIL Low Emissions Graphite [96.3] [82.6] 1. Approximate valve weight: 4.4 lb [2. kg]. Metal seat:.156-inch [4 mm] diameter orifice. Valve C v.36 maximum. Soft seat:.187-inch [4.8 mm] diameter orifice. Valve C v.83 maximum. 2. Teflon is a registered trademark of the E.I. dupont de Nemours Company. Instrument Vent/Test Block/Isolate Process right to change product designs and specifications without notice. 4

3 Static Pressure Manifolds M4TP Metal Seat (Soft Seat available) Dimensions, inches [mm].64 [16.3].22 [5.6] 2.12 [53.8].48 [12.2] TYP. 2.4 [61.].81 [2.6] 1.62 [41.1] ø.48 [12.2] Mounting Holes 2 Places For transmitters having bolt spacing greater than 2.12 [53.8] 1 /4-18 NPT B Max. Open 3.4 [86.4] Instrument Side A Max. Open 2.38 [6.4] 2.41 [61.2] 1.64 [41.7] Block/Isolate Valve.94 [23.9] Vent Valve 3.68 [93.5] 1 /2-14 NPT Process Port ø.38 [9.6] Mounting Holes 2 Places 1 /4-18 NPT Instrument Vent/Test Block/Isolate Dimensions, inches [mm] Packing A B Teflon [79.8] [66.] GRAFOIL Low Emissions Graphite [96.3] [82.6] Note 1. Approximate valve weight: 4.2 lb [1.9 kg]. Metal seat:.156-inch [4 mm] diameter orifice. Valve C v.36 maximum. Soft seat:.187-inch [4.8 mm] diameter orifice. Valve C v.83 maximum. Process right to change product designs and specifications without notice. 5

4 Static Pressure Manifolds M4AP and M4TP Standard Materials Valve Body Bonnet Stem Ball Bolts Packing CS 1 A576-1L18 A18 A PH A193-B7 Teflon CS 1 A576-1L18 A15 A PH A193-B7 GRAFOIL 316 SS A A A SS A193-B7 Teflon 316 SS A A A SS A193-B7 GRAFOIL SG 2 A A Monel 4 Monel K5 A193-B7 Teflon Monel Monel 4 Monel R45 Monel 4 Monel K5 A193-B7 Teflon Pressure and Temperature Ratings Packing Valve Seat Pressure and Temperature Ratings Teflon CS, SS Delrin 6 2 F [ C] 6 2 F [ C] Teflon CS, SS PEEK 2 4 F [ C] 1 15 F [69 66 C] Teflon CS, SS Teflon 2 5 F [14 26 C] Teflon CS, SS Integral Teflon Monel Integral GRAFOIL / Low Emissions CS Integral Graphite GRAFOIL / Low Emissions SS Integral Graphite 6 2 F [ C] 4 5 F [ C] 53 2 F [ C] 42 5 F [29 26 C] 6 2 F [ C] 4 6 F [ C] 6 2 F [ C] 15 F [ C] 1. CS is zinc cobalt plated to prevent corrosion. 2. SG (Sour Gas) all SS wetted parts are RC22 or less to meet requirements of NACE MR175-latest revision. 3. Monel is a registered trademark of International Nickel Company, right to change product designs and specifications without notice. 6

5 Static Pressure Manifolds M4AP and M4TP Pressure vs. Temperature Soft Seat 1. PCTFE (Polychlorotrifluoroethylene) is the exact equivalent of Kel-F. 2. Delrin is registered trademarks of the E.I. dupont de Nemours Company. Pressure psig [barg] 6 [414] 5 [345] 4 [276] 3 [27] 2 [138] Teflon PEEK Delrin PCTFE 1 Denotes intersecting data 2 [14] 1 [69] [-18] 1 [38] 15 [66] 2 [93] 3 [149] Temperature F [ C] 4 [24] 5 [26] Pressure vs. Temperature Metal Seat Pressure psig [barg] 53 [365] 42 [29] 15 [13] 6 [414] 5 [345] 4 [276] 3 [27] 2 [138] 1 [69] M4 HIC M4 HIS M4TPVIM M4 VIC M4 VIS M4 VIM Denotes intersecting data [-18] 1 [38] 2 [93] 3 [149] 4 [24] 5 [26] 6 [316] 7 [371] 8 [427] 9 [482] 1 [538] Temperature F [ C] right to change product designs and specifications without notice. 7

6 Static Pressure Manifolds M4AP and M4TP Ordering Information M4TP V D C 4 AM Valve Type M4AP Flange x Flange M4TP FNPT x Flange Bonnet Packing V Teflon (Soft and Integral seats) H GRAFOIL (Integral seat only) E Low Emissions Graphite (Integral seat only) Seat Material D Delrin (standard) V Teflon E PEEK K PCTFE (Polychlorotrifluoroethylene) is the exact equivalent of Kel-F. I Integral (body material) Body Material C CS S 316 SS M Monel Process Connections 4 1 /2-inch FNPT 4AT Integral 1 /2-inch Single Ferrule Tube Fittings 4ATD Integral 1 /2-inch Dual Ferrule Tube Fittings Options AM AGCO Mount Kit for 2-inch pipestand mounting of manifold (page 38). BC Accessory bracket for mounting conduit with AGCO Mount. BP Accessory bracket for mounting purge meters with AGCO Mount. CL Cleaned for chlorine service. HD Hydrostatic testing (1 percent) LP Street Elbows and Top Purge Ports OC Cleaned for oxygen service. PB Bottom purge port (Metal Seat only) PT Top purge port (Metal Seat only) (if elbow is required, specify -LP, not -PT) SG Sour Gas meets the requirements of NACE MR175-latest revision. (SS valves only) SP Special Requirements - please specify right to change product designs and specifications without notice. 8

7 Static Pressure Manifolds M4TP ASME B31.1 Ordering Information Power Industry Applications 1 M4TPHP S 4 XP AM Valve Type M4TPHP Body Material C CS, A15 S 316 SS Process Connections (Process x Instrument x Vent) 4 1 /2-inch FNPT 4AT Integral 1 /2-inch Single Ferrule Tube Fittings 4ATD Integral 1 /2-inch Dual Ferrule Tube Fittings 4TB 1 /2-inch Tube S.W. x Flange x 1 /4-inch FNPT Options AM AGCO Mount Kit for 2-inch pipestand mounting of manifold (page 38). SP Special Requirements - please specify 1. All Manifolds come standard with GRAFOIL packing, integral seats, bonnet locks, and are subjected to hydrostatic testing. 2. Manifold ratings: SST 6 1 F F [ C] [ C] STL F F [ C] [ C] 3. See page 148 for Code Requirements. right to change product designs and specifications without notice. 9