C22A Parts. Brass Body. C22AA, C22AB, and C22AC. No. Part Number Description Pump
|
|
|
- Leonard Fields
- 5 years ago
- Views:
Transcription
1 C22A Parts C22AA, C22AB, and C22AC 1 C Adjusting bolt, Pressure range A...1 C Adjusting bolt, Pressure range B, C C Jam nut C Screw, Cap, 5/16 x C Lockwasher, 5/ a C Valve top, Unwetted...1 5b C Valve top, Brass C Spring disc, 20 x 10.2 x 1.2 mm...** C Spring disc, 20 x 10.2 x 0.8 mm...** C Spring disc, 20 x 10.2 x 1.5 mm...** 7 C Plunger Assembly, 316 SST...1 C Plunger Assembly, SST, C Plunger Assembly, 17-4 PH SST...1 C Plunger Assembly, Hastelloy C C Seal, Back-up, Buna-N...1 C Seal, Back-up, UHMW polyethylene...1 C Seal, Back-up, PTFE C Seal, Buna-N...1 C Seal, Viton...1 C Seal, EPDM...1 C Seal, Urethane * C O-ring, Sleeve, Buna-N...1 C O-ring, Sleeve, Viton...1 C O-ring, Sleeve, EPDM * C Sleeve, 316 SST...1 C Sleeve, Hastelloy C C Seat, 316 SST...1 C Seat, 17-4 HT...1 C Seat, Tungsten carbide...1 C Seat, Hastelloy C C O-ring, Valve seat, Buna-N...1 C O-ring, Valve seat, Viton...1 C O-ring, Valve seat, EPDM C Valve body, Brass, NPT C O-ring, Buna-N...1 C O-ring, Viton...1 C O-ring, EPDM C Nameplate, C22, blank (specify model W C A
2 C22A Parts C22AA, C22AB, and C22AC 1 C Adjusting bolt, Pressure range A...1 C Adjusting bolt, Pressure range B, C C Jam nut C Screw, Cap, 5/16 x C Lockwasher, 5/ a C Valve top, Nonwetted C Spring disc, 20 x 10.2 x 1.2 mm...** C Spring disc, 20 x 10.2 x 0.8 mm...** C Spring disc, 20 x 10.2 x 1.5 mm...** 7 C Plunger Assembly, 316 SST...1 C Plunger Assembly, SST, C Plunger Assembly, 17-4 PH SST...1 C Plunger Assembly, Hastelloy C C Seal, Back-up, Buna-N...1 C Seal, Back-up, UHMW polyethylene...1 C Seal, Back-up, PTFE C Seal, Buna-N...1 C Seal, Viton...1 C Seal, EPDM...1 C Seal, Urethane * C O-ring, Sleeve, Buna-N...1 C O-ring, Sleeve, Viton...1 C O-ring, Sleeve, EPDM * C Sleeve, 316 SST...1 C Sleeve, Hastelloy C C Seat, 316 SST...1 C Seat, 17-4 HT...1 C Seat, Tungsten carbide...1 C Seat, Hastelloy C C O-ring, Valve seat, Buna-N...1 C O-ring, Valve seat, Viton...1 C O-ring, Valve seat, EPDM C Valve body, 316 SST, NPT...1 C Valve body, Nickel alloy C series NPT 1 15 C O-ring, Buna-N...1 C O-ring, Viton...1 C O-ring, EPDM C Nameplate, C22, blank (specify model C22AE 1 C Adjusting bolt, Pressure range E C Jam nut C Screw, Cap, 5/16 x 1-1/ C Lockwasher, 5/ c C Valve top, Non-wetted, 2500 psi C Spring disc, 20 x 10.2 x 1.5 mm C Plunger Assembly, 316 SST...1 C Plunger Assembly, 17-4 PH SST...1 C Plunger Assembly, Hastelloy C C Seal, Back-up, Buna-N...1 C Seal, Back-up, UHMW polyethylene...1 C Seal, Back-up, PTFE C Seal, Buna-N...1 C Seal, Viton...1 C Seal, Urethane * C O-ring, Sleeve, Buna-N...1 C O-ring, Sleeve, Viton * C Sleeve, 316 SST...1 C Sleeve, Hastelloy C C Seat, 316 SST...1 C Seat, 17-4 HT...1 C Seat, Hastelloy C C O-ring, Valve seat, Buna-N...1 C O-ring, Valve seat, Viton C Valve body, Brass, NPT...1 C Valve body, 316 SST, NPT...1 C Valve body, Nickel alloy C series NPT 1 15 C O-ring, Buna-N...1 C O-ring, Viton C Nameplate, C22, blank (specify model 7 C A
3 C23A Parts C23AA, C23AB, and C23AC 1 C Adjusting bolt, Pressure range A...1 C Adjusting bolt, Pressure range B...1 C Adjusting bolt, Pressure range C C Jam nut D Screw, Cap, 3/8 x 1-1/ D Lockwasher, 3/ a C Valve top. Nonwetted...1 5b C Valve top, Brass C Spring disc, 28 x 12.2 x 1.5 mm...** C Spring disc, 28 x 12.2 x 1.0 mm...** 7 C Plunger Assembly, 316 SST...1 C Plunger Assembly, SST, C Plunger Assembly, 17-4 PH SST...1 C Plunger Assembly, Hastelloy C C Seal, Back-up, Buna-N...1 C Seal, Back-up, UHMW polyethylene...1 C Seal, Back-up, PTFE C Seal, Buna-N...1 C Seal, Viton...1 C Seal, EPDM...1 C Seal, Urethane * C O-ring, Sleeve, Buna-N...1 C O-ring, Sleeve, Viton...1 C O-ring, Sleeve, EPDM * C Sleeve, 316 SST...1 C Sleeve, Hastelloy C C Seat, 316 SST...1 C Seat, 17-4 HT...1 C Seat, Tungsten carbide...1 C Seat, Hastelloy C C O-ring, Valve seat, EPDM C Valve body, Brass, NPT C O-ring, Buna-N...1 C O-ring, Viton...1 C O-ring, EPDM C Nameplate, C23, blank (specify model 1/4 ounce W C A
4 C23A Parts C23AA, C23AB, and C23AC 1 C Adjusting bolt, Pressure range A...1 C Adjusting bolt, Pressure range B...1 C Adjusting bolt, Pressure range C C Jam nut D Screw, Cap, 3/8 x 1-1/ D Lockwasher...4 5a C Valve top, Nonwetted C Spring disc, 28 x 12.2 x 1.5 mm...** C Spring disc, 28 x 12.2 x 1.0 mm...** 7 C Plunger Assembly, 316 SST...1 C Plunger Assembly, SST, C Plunger Assembly, 17-4 PH SST...1 C Plunger Assembly, Hastelloy C C Seal, Back-up, Buna-N...1 C Seal, Back-up, UHMW polyethylene...1 C Seal, Back-up, PTFE C Seal, Buna-N...1 C Seal, Viton...1 C Seal, EPDM...1 C Seal, Urethane * C O-ring, Sleeve, Buna-N...1 C O-ring, Sleeve, Viton...1 C O-ring, Sleeve, EPDM * C Sleeve, 316 SST...1 C Sleeve, Hastelloy C C Seat, 316 SST...1 C Seat, 17-4 HT...1 C Seat, Tungsten carbide...1 C Seat, Hastelloy C C O-ring, Valve seat, EPDM C Valve body, 316 SST, NPT...1 C Valve body, nickel alloy C series, NPT C O-ring, Buna-N...1 C O-ring, Viton...1 C O-ring, EPDM C Nameplate, C23, blank (specify model C23AE 1 C Adjusting bolt, Pressure range E C Jam nut A Screw, Cap, 3/8 x 1-1/ D Lockwasher...4 5c C Valve top, Brass, 2500 psi C Spring disc, 28 x 12.2 x 1.5 mm C Plunger Assembly, 316 SST...1 C Plunger Assembly, 17-4 PH SST...1 C Plunger Assembly, Hastelloy C C Seal, Back-up, Buna-N...1 C Seal, Back-up, PTFE C Seal, Buna-N...1 C Seal, Viton * C O-ring, Sleeve, Buna-N...1 C O-ring, Sleeve, Viton * C Sleeve, 316 SST...1 C Sleeve, Hastelloy C C Seat, 316 SST...1 C Seat, 17-4 HT...1 C Seat, Hastelloy C C Valve body, Brass, NPT...1 C Valve body, 316 SST, NPT...1 C Valve body, Nickel alloy C series, NPT C O-ring, Buna-N...1 C O-ring, Viton C Nameplate, C23, blank (specify model 9 C A
5 C24A Parts C24AA, C24AB, and C24AC ** 1 C Adjusting bolt, Pressure range A...1 C Adjusting bolt, Pressure range B...1 C Adjusting bolt, Pressure range C C Jam nut C Screw, Cap, 7/16 x 1-1/ C Lockwasher, 7/ C Valve top, Brass...1 C Valve top, 316 SST...1 C Valve top, Nickel alloy C series C Spring disc, 35.5 x 18.3 x 2.0 mm...** C Spring disc, 35.5 x 18.3 x 1.2 mm...** 7 C Plunger Assembly, 316 SST...1 C Plunger Assembly, SST, C Plunger Assembly, Hastelloy C C Plunger Assembly, 17-4 PH SST C Seal, Back-up, Buna-N...1 C Seal, Back-up, Viton C Seal, Buna-N...1 C Seal, Viton,...1 C Seal, EPDM C Seat, 316 SST...1 C Seat, 17-4 HT...1 C Seat, Tungsten carbide...1 C Seat, Hastelloy C C O-ring, Valve seat, EPDM C Valve body, Brass, NPT...1 C Valve body, 316 SST, NPT...1 C Valve body, Nickel alloy C series, NPT C O-ring, Buna-N...1 C O-ring, Viton...1 C O-ring, EPDM C Nameplate, C24, blank (specify model 10 C A
6 C22A/23A/24A Repair The valve can generally be repaired in place, without removing it from the system. When disassembling, note the number of spring discs and their arrangement. They must be reinstalled in the same arrangement (refer also to page 5 note that they are stacked, either singly or in pairs, facing in alternate directions). When reassembling, apply liberal amounts of high-temperature regulator grease (Wanner #A ) on the springs and around the plunger stem. The seal (9) and back-up seal (8) must be replaced together;; don t replace one without replacing the other. C22A/23A/24A Troubleshooting Excess Pressure Required to Bypass Fluid Regulating valve pressure not properly adjusted Nozzles worn Fluid Leaking from Hole in Valve Top Worn Seals System Losing Pressure Nozzles worn Pump RPM reduced Regulating valve pressure not properly adjusted Worn pump components Worn regulating valve seat or plunger System drawing in air Pressure Spikes Minimum bypass of 10% not being maintained Nozzles worn Regulating valve pressure not properly adjusted 11 C A
Models: C22D, C23D, C24D
Installation & Service C22-991-2401A Models: C22D, C23D, C24D Bypass Pressure Regulating Valves with BSPT Threaded Ports IMPORTANT Record your pump model number and serial number here for easy reference:
INDUSTRIAL PUMPS PARTS MANUAL. MODELS: C-22, C-23, C-24 Bypass Pressure Regulating Valves WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries about this pump, please mention
C Series Valves C24 1-1/4 NPT/BSPT C23 1 NPT/BSPT C22 3/4 NPT/BSPT. C22/C23/C24 Series (See page 88)
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
INDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
Model: D-10. Parts Manual D B. with non-metallic pump head WANNER ENGINEERING, INC. IMPORTANT
Parts Manual D10-991-2403B Model: D-10 with non-metallic pump head IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering
MODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
Models: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
Models: G-25, H-25 With Non-Metallic Pump Head
Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US
Models: G-25, H-25 With Metallic Pump Head
Parts Manual G5-99-40C Models: G-5, H-5 With Metallic Pump Head W09B WANNER ENGINEERING, INC. 04 Chestnut Avenue, Minneapolis, MN 55403 TEL: () 33-58 FAX: () 33-937 TOLL-FREE FAX [US only]: (800) 33-8
C Series Valves C24 1-1/4 NPT C23 1 NPT C22 3/4 NPT. C22/C23/C24 Series. Stainless Steel Off-Line Brass Off-Line. Brass In-Line.
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
MODEL: G-25 WITH METALLIC PUMP HEAD
PARTS MANUAL G25-991-2402B MODEL: G-25 WITH METALLIC PUMP HEAD IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
Models: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
INDUSTRIAL PUMPS PARTS MANUAL MODELS: M-03 D-03 M-23 M-24 G-03 G-13 WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: INDUSTRIAL PUMPS MODELS: M-03 D-03 M-23 M-24 G-03 G-13 Model No. Serial No. Date of Purchase When ordering
INDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts
Hydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
CUSTOM COMBINATION AIR VALVE
INSTALLATION / OPERATION / MAINTENANCE CUSTOM COMBINATION AIR VALVE INTRODUCTION This manual will provide you with the information to properly install and maintain this valve to ensure a long service life.
Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions
Parts Manual D03-991-2406 Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
D/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
Installation, Operation and Maintenance Instructions
Installation, Operation and Maintenance Instructions MODEL 5520 June 2002 1.0 GENERAL... 2 Model Number Information... 2 Features... 3 Specifications... 4 Table 1A. Flow Coefficients (C V ), Modified Percent
P200 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional)
P200 Metering Pump Installation & Service P200-991-2400A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional) 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
T100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump
T100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
Instrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.
Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.
T100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
Installation Operation and Maintenance Instructions Model Contents
Contents 1.0 General 1.1 Model Number........................... 2 1.2 Specifications............................ 2 1.3 Dimensions.............................. 3 Repair Kit Materials & Part Numbers........
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05-FLG PRESSURE RELIEF VALVE FLANGED 150#, 300#,
T100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
220-UL PUMP PARTS PRICE LIST
ITEM 1 PUMP Pump Body 1 See Note 1 1 Pump Body with Flush 1 See Note 1 1 7 Drive Shaft (Replaces 103227) 1 108425 8 Short Shaft (Replaces 103228) 1 108426 9 10 220-UL PUMP PARTS PRICE LIST DESCRIPTION
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05i-Npt Stainless Steel Inline High Pressure Relief
Model BPS05-Npt-P. Plastic Back Pressure Regulator Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS05-Npt-P Plastic Back Pressure Regulator Valve Piston-operated
F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
Chemical Hydraulic Valve Designed for hauling a variety of products U.S. Pat. No. 3,065,949 Patented 1962
Chemical Hydraulic Valve Designed for hauling a variety of products U.S. Pat. No. 3,065,949 Patented 962 Schematic Tel. (84) 723-250 Fax (84) 723-7030 E-Mail: betts@bettsind.com Web Site: www.bettsind.com
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
I N S T R U C T I O N M A N U A L
I N S T R U C T I O N M A N U A L M E T E R I N G P U M P S LINC84T-17, 18 & 20 Series Chemical Metering Pump Pneumatic Plunger T A B L E O F C O N T E N T S Contents - 84T-17, -18 & -20 Pump Manual...
DI DI PUMP PARTS PRICE LIST
ITEM 1 2 2A 5050 Pump Body, 2" NPT Mech. Seal 1 40091 1 5050 Pump Body, 2" 150# RF Flg. Mech. Seal 1 40791 1 5050 Pump Body, 2" NPT, Packing 1 40088 1 5050 Pump Body, 2" 150# RF Flg., Packing 1 40793 1
T100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
T100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 060-064 - 130-134 - 133-U1 PUMP PARTS PRICE LIST DESCRIPTION QTY. PER PUMP 060-U1 Pump Body 1 See Note 1 1 060-U1 Pump Body with Flush 1 See Note 1 1 064-U1 Rectangular Flange Inlet Body 1
1450 Control Valve. General Instructions. Table of Contents
The SOR 1450 control valve is designed for general use for either liquid or gas service that require a throttle or on/off control. The valve has one port with two different types of plugs: quick opening
DI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
Valves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 030-U1 Pump Body 1 See Note 1 1 030-U1 Pump Body with Flush 1 See Note 1 1 034-U1 Rectangular Flange Inlet Body 1 See Note 1 1 034-U1 Rect. Flange Inlet Body with Flush 1 See Note 1 1
P100 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional)
P100 Metering Pump Installation & Service P100-991-2400A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional) 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937
69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
D/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
HIGH PRESSURE CONTROL VALVE PISTON BALANCED
PISTON BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (open yoke) and Model 5450 (closecoupled) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry.
Thompson Valve 1 IMPORTANT WARNING FOR SAFER BLAST CLEANING
OWNER S MANUAL Thompson Valve 1 IMPORTANT WARNING FOR SAFER BLAST CLEANING 1. Use protective equipment: Abrasive-resistant clothing, safety shoes, leather gloves, ear protection, CE-approved air-fed helmet.
Husky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
Series 2200 and 2220 Control Valves
Series 2200 and 2220 Control Valves Space-Saving Solution: Yokeless design fits tight separator and scrubber applications Series 2200 Series 2220 Norriseal Series 2200 and 2220 control valves have been
LEVEL CONTROL SWITCHES
The LINC-282 & LINC-282SC Series: Snap Acting, Non-Bleed Pneumatic Level Control Switches Application: These units are used as a level control or as a high or low level alarm. The pneumatic output can
Models: D35, G35. Installation, Operation & Maintenance D B
Installation, Operation & Maintenance D35-991-2400B Models: D35, G35 W0172B 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
U2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS05-600 FLG Back Pressure/Bypass Valve Flanged Stainless
U1 PUMP PARTS PRICE LIST
006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1
I N S T R U C T I O N M A N U A L
I N S T R U C T I O N M A N U A L M E T E R I N G P U M P S LINC84T-10, 11, 12, & 14 Series Chemical Metering Pump Pneumatic Plunger Contents - 84T-10, 11, 12, & 14 Pump Manual... Page General Specifications...
Section H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.
G15 Series API bar (2500 psi) for Metallic Pump Heads. G15 for horizontal installations shown with Stainless Steel pump head.
G15 Series Maximum Flow Rate: Maximum Pressure: 58.7 l/min (15.5 gpm) 172 bar (2500 psi) for Metallic Pump Heads API 674 ATEX G15 for horizontal installations shown with Stainless Steel pump head. G15
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
T100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
I N S T R U C T I O N M A N U A L
I N S T R U C T I O N M A N U A L M E T E R I N G P U M P S LINC84T-13 Series Chemical Metering Pump Pneumatic Plunger T A B L E O F C O N T E N T S Contents - 84T-13 Pump Manual... Page General Specifications...
Hydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
Service Handbook High-Pressure Washer Pump
Service Handbook High-Pressure Washer Pump 9.120-014.0 2 A. Water Inlet Filter C. Nozzle Insert 1. Remove filter with a screwdriver. 2. Clean filter with warm water and mild soap. 3. Reinstall filter.
Pneumatic Chemical Metering Pump
Timberline s was designed with the well pumper and the chemical man in mind. Each pump has a simple but rugged design that can be repaired in the field within minutes on the tailgate of a pickup truck.
Complete orbital coverage of all interior surfaces. Suitable for use in the food industry. Model Number Y Y Rated Pressure
FEATURES Designed for quick and efficient cleaning of interior surfaces of tanks and barrels. TANK CLEANING TANK CLEANING Note: Nozzles not included SPECIFICATIONS Model Number Y25479000 Y25479100 Rated
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
SERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
PFM6 Digital Portable Hydraulic Tester
PFM6 Digital Portable Hydraulic Tester temperature Helical tube pressure gauge One toggle switch to control power and pressure Platinum resistance temperature sensor Pressure surge protection with internal
MixRite TF 5 Fertilizer and Chemicals Injector
MixRite TF-5 MixRite TF 5 Fertilizer and Chemicals Injector Congratulations on your purchase of one of our high quality products. To get the best results from the MixRite TF-5 Proportioning Dosing Injector
Model BPS-09-Npt. Stainless Steel Back Pressure Bypass Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-09-Npt Stainless Steel Back Pressure Bypass Valve
P400 Metering Pump. Installation, Operation & Maintenance P C. Metallic pump shown W0014B
TM P400 Metering Pump Installation, Operation & Maintenance P400-991-2400C W0014B Metallic pump shown 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US
9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
Gaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs.
2009 Fluid Handling Components Gaskets Bee Valve offers a full line of original and replacement gaskets to meet all your needs. Bolted Tank Fitting Bulkhead Fitting Manifold System Cam Coupler Tank Lid
P300 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC.
P300 Metering Pump Installation & Service P300-991-2400A WANNER ENGINEERING, INC. 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937 TOLL-FREE FAX [US only]: (800) 332-6812
BULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
MixRite TF 10 Fertilizer and Chemicals Injector
MixRite TF 10 MixRite TF 10 Fertilizer and Chemicals Injector Congratulations on your purchase of one of our high quality products. To get the best results from the MixRite TF-10 Proportioning Dosing Injector
Texsteam SolarLite C1D2 Solar Chemical Injection Pump
DATASHEET Texsteam SolarLite C1D2 Solar Chemical Injection Pump Product Information GE Oil & Gas Texsteam SolarLite C1D2 solar chemical injection pump is designed for hazardous locations with its Class
Electron Microscopy Sciences
Electron Microscopy Sciences INSTRUCTIONAL MANUAL CAT. #64186-10, -12, -20, -22 #64190-10, -12, -20, -22 Sure Shot Pressure Sprayers ATOMIZER MODEL B P.O. Box 550 s1560 Industry Road s Hatfield PA 19440
GLYCOL FEED SYSTEMS OPERATION & MAINTENANCE MANUAL
GLYCOL FEED SYSTEMS OPERATION & MAINTENANCE MANUAL PLEASE RECORD THE FOLLOWING DATA (Information is located on the product label or packing slip) Model Number: Date Code: Installation Date: Installation
Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
CVS 128PQC Series Control Valve
Instruction Manual CVS 128PQC Series Control Introduction Contents Contained in this manual are installation instructions, maintenance procedures and parts information for the CVS 128PQC Control. Refer
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16
G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21
3CP Plunger Pump 3CP1120,3CP1130 FEATURES. ELECTRIC HORSEPOWER REQUIREMENTS MODELS FLOW PRESSURE MOTOR PULLEY SIZE psi 1200
FEATURES Triplex design offers high efficiency and low pulsation. Durable high pressure seals are lubricated and cooled by pumped liquid. Pre-set Lo-Pressure Seals provide secondary protection against
G04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head
G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel