Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining

Transcription

1 Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high efficiency. Configured for superior NPSH characteristics, ductile iron construction. Internal hydraulic balancing for reduced bearing load. Seal: Packed box with lantern ring or mechanical seal with silicon carbide/silicon carbide, Viton elastomers. Bearing Frame: Heavy duty iron, oversized shaft, max-life bearings and external grease lubrication. Mounting: Can be mounted in vertical or horizontal position. Specifications: Capacities: to 1100 gpm Heads: to 250 feet Working Pressure: 350 psi Temperature: maximum 212 o F Rotation: clockwise viewed from motor end Pipe Connections: flanged - Class 150 Discharge Suction 1-1/2" 3" 2" 3" 2-1/2" 4" 3" 4" 4" 4" 4" 5" Maintenance Features: Replaceable bronze wear-rings. Replaceable shaft sleeve Casing jack-out holes for ease of service Two piece stainless packing gland Applications: Irrigation Commercial Construction Municipal Mining Light Industrial Viton is a registered trademarks of E. I. du Pont de Nemours and Company.

2 Frame Mount 7.5 Dimensional Drawings: FIGURE 1 X DD1 KEY DD3 Z U N Q F B CP HØ 4 HOLES L DD2 Y E E A D G Dimensions: Model A B D E F G H L N Q U X Y Z CP DD1 DD2 DD3 KEY 1.5 x x x x x x o Note: Dimensions are for estimating purposes only. All dimensions in inches. 2

3 Frame Mount 7.5" Ordering Information: 7.5" Nominal Impeller Diameter - (BF) Bearing Frame Pump Size (Dis x Suc - Imp) Rotation Shaft Sealing Model Description Order Number Weight 1.5 x CW Packing HC-3X15-75-BF-P x CW Mechanical Seal HC-3X15-75-BF-M x CW Packing HC-3X2-75-BF-P x CW Mechanical Seal HC-3X2-75-BF-M x CW Packing HC-4X25-75-BF-P x CW Mechanical Seal HC-4X25-75-BF-M x CW Packing HC-4X3-75-BF-P x CW Mechanical Seal HC-4X3-75-BF-M x CW Packing HC-4X4-75-BF-P x CW Mechanical Seal HC-4X4-75-BF-M x CW Packing HC-5X4-75-BF-P x CW Mechanical Seal HC-5X4-75-BF-M Notes: There will be an impeller trimming charge applied for any non-standard impeller trim. Consult price sheets for list price adders. All dimensions in inches. All weight in pounds. 3

4 Frame Mount x Exploded Parts Drawing: MECHANICAL SEAL ASSEMBLY 12A A 3 100A PACKING GLAND ASSEMBLY B B

5 Frame Mount 7.5" 1.5 x Materials and Parts: Figure No. Part Description Part No. Materials of Construction 1 Volute, Case ASTM 536 Ductile Iron 2 Impeller (7.5 diameter, 1-1/4" bore) ASTM 536 Ductile Iron 3 Bracket ASTM 536 Ductile Iron 4 Wear Ring SAE 660 Bronze 10 Seal Box ASTM 536 Ductile Iron 11 Stuffing Box ASTM 536 Ductile Iron 12A Shaft Sleeve - Mechanical SAE 660 Bronze 12B Shaft Sleeve - Packing SAE 660 Bronze 13 Packing Rings (Set of 5) Graphite Yarn with PTFE 14 Lantern Ring PTFE 15 Packing Gland (Set of 2) Series Stainless Steel 20 Mechanical Seal Assembly Various 21 Packing Gland Assembly Various 35 Key, Shaft Series Stainless Steel 90 Mechanical Seal SiC/SiC/Viton x SS 100A O-Ring Volute BUNA-N O-Ring Stuffing/Seal Box BUNA-N 110 Nameplate Stainless Steel Pipe Plug, (3/8 NPT) (4 Req) CAD Plated Pipe Plug, (1/2 NPT) (2 Req) CAD Plated 510 Screw, Impeller (1/2-13x1.25) Stainless Steel 520 Washer, Impeller Series Stainless Steel 529 Nut, Hex (3/8-16 JAM) (2 Req) CAD Plated 530A Capscrew, Hex (3/8-16x1.00) (10 Req) CAD Plated 530B Capscrew, Hex (1/2-13x1.25) (4 Req) CAD Plated Capscrew, Hex (3/8-16x1.00) (4 Req) CAD Plated 531 Stud, Threaded (2 Req) CAD Plated 550 Screws, Drive (Set of 2) Stainless Steel Viton is a registered trademarks of E. I. du Pont de Nemours and Company. Seal Kits: Type Included Part No. Part No. Mechanical 12A, 90, 100A, Packing 12B, 13, 14, 100A,

6 Frame Mount x Exploded Parts Drawing: MECHANICAL SEAL ASSEMBLY 12A A 3 100A PACKING GLAND ASSEMBLY B B

7 Frame Mount 7.5" 2 x Materials and Parts: Figure No. Part Description Part No. Materials of Construction 1 Volute, Case ASTM 536 Ductile Iron 2 Impeller (7.5 diameter, 1-1/4" bore) ASTM 536 Ductile Iron 3 Bracket ASTM 536 Ductile Iron 4 Wear Ring SAE 660 Bronze 10 Seal Box ASTM 536 Ductile Iron 11 Stuffing Box ASTM 536 Ductile Iron 12A Shaft Sleeve - Mechanical SAE 660 Bronze 12B Shaft Sleeve - Packing SAE 660 Bronze 13 Packing Rings (Set of 5) Graphite Yarn with PTFE 14 Lantern Ring PTFE 15 Packing Gland (Set of 2) Series Stainless Steel 20 Mechanical Seal Assembly Various 21 Packing Gland Assembly Various 35 Key, Shaft Series Stainless Steel 90 Mechanical Seal SiC/SiC/Viton x SS 100A O-Ring Volute BUNA-N O-Ring Stuffing/Seal Box BUNA-N 110 Nameplate Stainless Steel Pipe Plug, (3/8 NPT) (4 Req) CAD Plated Pipe Plug, (1/2 NPT) (2 Req) CAD Plated 510 Screw, Impeller (1/2-13x1.25) Stainless Steel 520 Washer, Impeller Series Stainless Steel 529 Nut, Hex (3/8-16 JAM) (2 Req) CAD Plated 530A Capscrew, Hex (3/8-16x1.00) (10 Req) CAD Plated 530B Capscrew, Hex (1/2-13x1.25) (4 Req) CAD Plated Capscrew, Hex (3/8-16x1.00) (4 Req) CAD Plated 531 Stud, Threaded (2 Req) CAD Plated 550 Screws, Drive (Set of 2) Stainless Steel Viton is a registered trademarks of E. I. du Pont de Nemours and Company. Seal Kits: Type Included Part No. Part No. Mechanical 12A, 90, 100A, Packing 12B, 13, 14, 100A,

8 Frame Mount x Exploded Parts Drawing: 20 MECHANICAL SEAL ASSEMBLY 12A A 3 100A PACKING GLAND ASSEMBLY B B 14 8

9 Frame Mount 7.5" 2.5 x Materials and Parts: Figure No. Part Description Part No. Materials of Construction 1 Volute, Case ASTM 536 Ductile Iron 2 Impeller (7.5 diameter, 1-1/4 bore) ASTM 536 Ductile Iron 3 Bracket ASTM 536 Ductile Iron 4 Wear Ring SAE 660 Bronze 10 Seal Box ASTM 536 Ductile Iron 11 Stuffing Box ASTM 536 Ductile Iron 12A Shaft Sleeve - Mechanical SAE 660 Bronze 12B Shaft Sleeve - Packing SAE 660 Bronze 13 Packing Rings (Set of 5) Graphite Yarn with PTFE 14 Lantern Ring PTFE 15 Packing Gland (Set of 2) Series Stainless Steel 20 Mechanical Seal Assembly Various 21 Packing Gland Assembly Various 35 Key, Shaft Series Stainless Steel 90 Mechanical Seal SiC/SiC/Viton x SS 100A O-Ring Volute BUNA-N O-Ring Stuffing/Seal Box BUNA-N 110 Nameplate Stainless Steel Pipe Plug, (3/8 NPT) (4 Req) CAD Plated Pipe Plug, (1/2 NPT) (2 Req) CAD Plated 510 Screw, Impeller (1/2-13x1.25) Stainless Steel 520 Washer, Impeller Series Stainless Steel 529 Nut, Hex (3/8-16 JAM) (2 Req) CAD Plated 530A Capscrew, Hex (3/8-16x1.00) (10 Req) CAD Plated 530B Capscrew, Hex (1/2-13x1.25) (4 Req) CAD Plated Capscrew, Hex (3/8-16x1.00) (4 Req) CAD Plated 531 Stud, Threaded (2 Req) CAD Plated 550 Screws, Drive (Set of 2) Stainless Steel Viton is a registered trademarks of E. I. du Pont de Nemours and Company. Seal Kits: Type Included Part No. Part No. Mechanical 12A, 90, 100A, Packing 12B, 13, 14, 100A,

10 Frame Mount x Exploded Parts Drawing: 20 MECHANICAL SEAL ASSEMBLY 12A A 3 100A 4B A 1 21 PACKING GLAND ASSEMBLY B B 14 10

11 Frame Mount 7.5" 3 x Materials and Parts: Figure No. Part Description Part No. Materials of Construction 1 Volute, Case ASTM 536 Ductile Iron 2 Impeller (7.5 diameter, 1-1/4" bore) ASTM 536 Ductile Iron 3 Bracket ASTM 536 Ductile Iron 4A Wear Ring SAE 660 Bronze 4B Wear Ring SAE 660 Bronze 10 Seal Box ASTM 536 Ductile Iron 11 Stuffing Box ASTM 536 Ductile Iron 12A Shaft Sleeve - Mechanical SAE 660 Bronze 12B Shaft Sleeve - Packing SAE 660 Bronze 13 Packing Rings (Set of 5) Graphite Yarn with PTFE 14 Lantern Ring PTFE 15 Packing Gland (Set of 2) Series Stainless Steel 20 Mechanical Seal Assembly Various 21 Packing Gland Assembly Various 35 Key, Shaft Series Stainless Steel 90 Mechanical Seal SiC/SiC/Viton x SS 100A O-Ring Volute BUNA-N O-Ring Stuffing/Seal Box BUNA-N 110 Nameplate Stainless Steel Pipe Plug, (3/8 NPT) (4 Req) CAD Plated Pipe Plug, (1/2 NPT) (2 Req) CAD Plated 510 Screw, Impeller (1/2-13x1.25) Stainless Steel 520 Washer, Impeller Series Stainless Steel 529 Nut, Hex (3/8-16 JAM) (2 Req) CAD Plated 530A Capscrew, Hex (3/8-16x1.00) (10 Req) CAD Plated 530B Capscrew, Hex (1/2-13x1.25) (4 Req) 8.5AK Bracket CAD Plated 530B Capscrew, Hex (5/8-11x1.25) (4 Req) 12.5AK Bracket CAD Plated Capscrew, Hex (3/8-16x1.00) (4 Req) CAD Plated 531 Stud, Threaded (2 Req) CAD Plated 550 Screws, Drive (Set of 2) Stainless Steel Viton is a registered trademarks of E. I. du Pont de Nemours and Company. Seal Kits: Type Included Part No. Part No. Mechanical 12A, 90, 100A, Packing 12B, 13, 14, 100A,

12 Frame Mount 7.5 Exploded Parts Drawing: 4 x MECHANICAL SEAL ASSEMBLY 12A A 3 100A 4B A 1 21 PACKING GLAND ASSEMBLY B B 14 12

13 Frame Mount 7.5" 4 x Materials and Parts: Figure No. Part Description Part No. Materials of Construction 1 Volute, Case ASTM 536 Ductile Iron 2 Impeller (7.5 diameter, 1-1/4" bore) ASTM 536 Ductile Iron 3 Bracket ASTM 536 Ductile Iron 4A Wear Ring SAE 660 Bronze 4B Wear Ring SAE 660 Bronze 10 Seal Box ASTM 536 Ductile Iron 11 Stuffing Box ASTM 536 Ductile Iron 12A Shaft Sleeve - Mechanical SAE 660 Bronze 12B Shaft Sleeve - Packing SAE 660 Bronze 13 Packing Rings (Set of 5) Graphite Yarn with PTFE 14 Lantern Ring PTFE 15 Packing Gland (Set of 2) Series Stainless Steel 20 Mechanical Seal Assembly Various 21 Packing Gland Assembly Various 35 Key, Shaft Series Stainless Steel 90 Mechanical Seal SiC/SiC/Viton x SS 100A O-Ring Volute BUNA-N O-Ring Stuffing/Seal Box BUNA-N 110 Nameplate Stainless Steel Pipe Plug, (3/8 NPT) (4 Req) CAD Plated Pipe Plug, (1/2 NPT) (2 Req) CAD Plated 510 Screw, Impeller (1/2-13x1.25) Stainless Steel 520 Washer, Impeller Series Stainless Steel 529 Nut, Hex (3/8-16 JAM) (2 Req) CAD Plated 530A Capscrew, Hex (3/8-16x1.00) (10 Req) CAD Plated 530B Capscrew, Hex (1/2-13x1.25) (4 Req) 8.5AK Bracket CAD Plated 530B Capscrew, Hex (5/8-11x1.25) (4 Req) 12.5AK Bracket CAD Plated Capscrew, Hex (3/8-16x1.00) (4 Req) CAD Plated 531 Stud, Threaded (2 Req) CAD Plated 550 Screws, Drive (Set of 2) Stainless Steel Viton is a registered trademarks of E. I. du Pont de Nemours and Company. Seal Kits: Type Included Part No. Part No. Mechanical 12A, 90, 100A, Packing 12B, 13, 14, 100A,

14 Frame Mount 7.5 Exploded Parts Drawing: 4 x MECHANICAL SEAL ASSEMBLY 12A A 3 100A 4B A 1 21 PACKING GLAND ASSEMBLY B B 14 14

15 Frame Mount 7.5" 4 x Materials and Parts: Figure No. Part Description Part No. Materials of Construction 1 Volute, Case ASTM 536 Ductile Iron 2 Impeller (7 diameter, 1-1/4" bore) ASTM 536 Ductile Iron 3 Bracket ASTM 536 Ductile Iron 4A Wear Ring SAE 660 Bronze 4B Wear Ring SAE 660 Bronze 10 Seal Box ASTM 536 Ductile Iron 11 Stuffing Box ASTM 536 Ductile Iron 12A Shaft Sleeve - Mechanical SAE 660 Bronze 12B Shaft Sleeve - Packing SAE 660 Bronze 13 Packing Rings (Set of 5) Graphite Yarn with PTFE 14 Lantern Ring PTFE 15 Packing Gland (Set of 2) Series Stainless Steel 20 Mechanical Seal Assembly Various 21 Packing Gland Assembly Various 35 Key, Shaft Series Stainless Steel 90 Mechanical Seal SiC/SiC/Viton x SS 100A O-Ring Volute BUNA-N O-Ring Stuffing/Seal Box BUNA-N 110 Nameplate Stainless Steel Pipe Plug, (3/8 NPT) (4 Req) CAD Plated Pipe Plug, (1/2 NPT) (2 Req) CAD Plated 510 Screw, Impeller (1/2-13x1.25) Stainless Steel 520 Washer, Impeller Series Stainless Steel 529 Nut, Hex (3/8-16 JAM) (2 Req) CAD Plated 530A Capscrew, Hex (3/8-16x1.00) (10 Req) CAD Plated 530B Capscrew, Hex (1/2-13x1.25) (4 Req) 8.5AK Bracket CAD Plated 530B Capscrew, Hex (5/8-11x1.25) (4 Req) 12.5AK Bracket CAD Plated Capscrew, Hex (3/8-16x1.00) (4 Req) CAD Plated 531 Stud, Threaded (2 Req) CAD Plated 550 Screws, Drive (Set of 2) Stainless Steel Viton is a registered trademarks of E. I. du Pont de Nemours and Company. Seal Kits: Type Included Part No. Part No. Mechanical 12A, 90, 100A, Packing 12B, 13, 14, 100A,

16 Frame Mount 7.5 Bearing Frame Exploded Parts Drawing: 530A 9 502B 26B A A 530B Materials and Parts: Figure No. Part Description Part No. Materials of Construction 5 Shaft Stressproof 6 Bearing Frame ASTM 536 Ductile Iron 9 Cover, Bearing Frame ASTM 536 Ductile Iron 16 Bearing, Pump Side Steel 17 Bearing, Drive Side Steel 22 Foot (2 Req) ASTM 536 Ductile Iron 26A Lip Seal, Pump Side BUNA-N 26B Lip Seal, Drive Side BUNA-N 35 Key (1/2 x 1/2 x 4.00) Series Stainless 36 Plate, Bearing Frame CRS Plate 37 Shim Series Stainless 37 Shim Series Stainless 37 Shim Series Stainless Pipe Plug (1/2 NPT) (2 Req) CAD Plated Grade S Pipe Plug (3/4 NPT) CAD Plated Grade S 502A Fitting, Grease Steel 502B Fitting, Grease Steel 530A Capscrew, Hex (5/8-1 x 1.50) (4 Req) CAD Plated Grade S 530B Capscrew, Hex (5/8-1 x 1.75) (4 Req) CAD Plated Grade S 532 Screw, Set CAD Plated Grade S Mi East Spring Street, Bluffton, Indiana Tel: Fax: