CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
|
|
|
- Bernadette Shaw
- 6 years ago
- Views:
Transcription
1 FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics Seal: Packed box with lantern ring Power Frame: Heavy-duty ductile iron; oversized keyed shaft; max-life bearings Mounting: SAE engine mount Replaceable bronze wear-rings Casing jack-out holes for ease of service Two-piece stainless steel packing gland SPECIFICATIONS Capacities to 1,900 gpm Heads to 480 feet 250 psi maximum working pressure 212 F maximum temperature Clockwise rotation when viewed from motor end Class 150 flanged pipe connections APPLICATIONS Irrigation Commercial Construction Municipal Mining Light Industrial Discharge Suction 2" 3" 2-1/2" 4" 3" 4" 4" 6" 6" 8"
2 ORDERING INFORMATION Pump Model Volute Rotation Shaft Shaft Taper SAE Size Clutch Size (in) Sealing (Dia. x Keyway) Bushing Model Description Ordering No. Wt. (lbs) HC3210-SA3P x HC3210-SA4P HC3210-SA5P HC42510-SA3P x HC42510-SA4P HC42510-SA5P HC4310-SA3P x HC4310-SA4P Flanged CW Packing 1-7/8" x 1/2" 5 8 HC4310-SA5P HC6410-SA3P x HC6410-SA4P HC6410-SA5P HC8695-SA1P x 8-10L HC8695-SA3P HC8695-SA4P HC8610-SA1P x HC8610-SA3P HC8610-SA4P NOTE: There will be an impeller trimming charge applied for any non-standard impeller trim; consult price sheets for list price adders DIMENSIONS FIG. 1 X DISCHARGE KEY SUCTION E D Z N F Hn 2 HOLES CP MP Y G 2
3 DIMENSIONS FIG. 2 MP X DISCHARGE KEY E SUCTION D Z K Hn 4 HOLES N F J CP Y G Size Fig. SAE No. Dimensions (in) D E F G H J K N X Y Z CP MP KEY x x x x x x 8-10L NOTE: Dimensions are for estimating purposes only. Bell Housing SAE No. Bolt Holes A B C Diameter No. mm in mm in mm in mm in / / / / /32 A C B 3
4 2 X B 100A A 530B B B 530A 500A 530C 21 - PACKING GLAND ASSEMBLY 4
5 Fig. Part Description Part No. Materials 1 Volute, Case ASTM 536 ductile iron 2 Impeller (10.25" dia., 1-1/4" bore) ASTM 536 ductile iron 3 Bracket ASTM 536 ductile iron 4A Wear Ring SAE 660 bronze 4B Wear Ring SAE 660 bronze 11 Stuffing Box ASTM 536 ductile iron 12B Shaft Sleeve, Packing SAE 660 bronze 13 Packing Rings (set of 5) Graphite yarn w/ptfe 14 Lantern Ring PTFE 15 Packing Gland (set of 2) Series stainless steel 21 Packing Gland Assembly Various 35 Key, Shaft Series stainless steel 100A O-ring, Volute Nitrile 100B O-ring, Stuffing/Seal Box Nitrile 110 Nameplate Stainless steel 500A Pipe Plug (3/8" NPT) (4 pack) CAD-plated steel 500C Pipe Plug (1/4" NPT) CAD-plated steel 510 Screw, Impeller (1/2-13 x 1.25) Stainless steel 520 Washer, Impeller Series stainless steel 529 Nut, Hex (3/8-16 JAM) (2 pack) CAD-plated steel 530A Capscrew, Hex (3/8-16 x 1.00) (10 pack) CAD-plated steel 530B Capscrew, Hex (1/2-13 x 1.25) (4 pack) CAD-plated steel 530C Capscrew, Hex (3/8-16 x 1.00) (4 pack) CAD-plated steel 531 Stud, Threaded (2 pack) CAD-plated steel 550 Screws, Drive (set of 2) Stainless steel SEAL KITS 2 X X 3-10 Type Included Part No. Part No. Packing 12B, 13, 14, 100A, 100B
6 2.5 X B 100A A 530B B B 530A 500A 530C 21 - PACKING GLAND ASSEMBLY 6
7 Fig. Part Description Part No. Materials 1 Volute, Case ASTM 536 ductile iron 2 Impeller (10.25" dia., 1-1/4" bore) ASTM 536 ductile iron 3 Bracket ASTM 536 ductile iron 4A Wear Ring SAE 660 bronze 4B Wear Ring SAE 660 bronze 11 Stuffing Box ASTM 536 ductile iron 12B Shaft Sleeve, Packing SAE 660 bronze 13 Packing Rings (set of 5) Graphite yarn w/ptfe 14 Lantern Ring PTFE 15 Packing Gland (set of 2) Series stainless steel 21 Packing Gland Assembly Various 35 Key, Shaft Series stainless steel 100A O-ring, Volute Nitrile 100B O-ring, Stuffing/Seal Box Nitrile 110 Nameplate Stainless steel 500A Pipe Plug (3/8" NPT) (4 pack) CAD-plated steel 500C Pipe Plug (1/4" NPT) CAD-plated steel 510 Screw, Impeller (1/2-13 x 1.25) Stainless steel 520 Washer, Impeller Series stainless steel 529 Nut, Hex (3/8-16 JAM) (2 pack) CAD-plated steel 530A Capscrew, Hex (3/8-16 x 1.00) (10 pack) CAD-plated steel 530B Capscrew, Hex (1/2-13 x 1.25) (4 pack) CAD-plated steel 530B Capscrew, Hex (5/8-11 x 1.25) (4 pack) CAD-plated steel 530C Capscrew, Hex (3/8-16 x 1.00) (4 pack) CAD-plated steel 531 Stud, Threaded (2 pack) CAD-plated steel 550 Screws, Drive (set of 2) Stainless steel SEAL KITS 2.5 X X 4-10 Type Included Part No. Part No. Packing 12B, 13, 14, 100A, 100B
8 3 X B 100A A 530B B B 530A 500A 530C 21 - PACKING GLAND ASSEMBLY 8
9 Fig. Part Description Part No. Materials 1 Volute, Case ASTM 536 ductile iron 2 Impeller (10.25" dia., 1-1/4" bore) ASTM 536 ductile iron 3 Bracket ASTM 536 ductile iron 4A Wear Ring SAE 660 bronze 4B Wear Ring SAE 660 bronze 11 Stuffing Box ASTM 536 ductile iron 12B Shaft Sleeve, Packing SAE 660 bronze 13 Packing Rings (set of 5) Graphite yarn w/ptfe 14 Lantern Ring PTFE 15 Packing Gland (set of 2) Series stainless steel 21 Packing Gland Assembly Various 35 Key, Shaft Series stainless steel 100A O-ring, Volute Nitrile 100B O-ring, Stuffing/Seal Box Nitrile 110 Nameplate Stainless steel 500A Pipe Plug (3/8" NPT) (4 pack) CAD-plated steel 500C Pipe Plug (1/4" NPT) CAD-plated steel 510 Screw, Impeller (1/2-13 x 1.25) Stainless steel 520 Washer, Impeller Series stainless steel 529 Nut, Hex (3/8-16 JAM) (2 pack) CAD-plated steel 530A Capscrew, Hex (3/8-16 x 1.00) (10 pack) CAD-plated steel 530B Capscrew, Hex (1/2-13 x 1.25) (4 pack) CAD-plated steel 530C Capscrew, Hex (3/8-16 x 1.00) (4 pack) CAD-plated steel 531 Stud, Threaded (2 pack) CAD-plated steel 550 Screws, Drive (set of 2) Stainless steel SEAL KITS 3 X X 4-10 Type Included Part No. Part No. Packing 12B, 13, 14, 100A, 100B
10 4 X B 100A A 530B B B 530A 500A 530C 21 - PACKING GLAND ASSEMBLY 10
11 4 X 6-10 Fig. Part Description Part No. Materials 1 Volute, Case ASTM 536 ductile iron 2 Impeller (10.25" dia., 1-1/4" bore) ASTM 536 ductile iron 3 Bracket ASTM 536 ductile iron 4A Wear Ring SAE 660 bronze 4B Wear Ring SAE 660 bronze 11 Stuffing Box ASTM 536 ductile iron 12B Shaft Sleeve, Packing SAE 660 bronze 13 Packing Rings (set of 5) Graphite yarn w/ptfe 14 Lantern Ring PTFE 15 Packing Gland (set of 2) Series stainless steel 21 Packing Gland Assembly Various 35 Key, Shaft Series stainless steel 100A O-ring, Volute Nitrile 100B O-ring, Stuffing/Seal Box Nitrile 110 Nameplate Stainless steel 500A Pipe Plug (3/8" NPT) (4 pack) CAD-plated steel 500C Pipe Plug (1/4" NPT) CAD-plated steel 510 Screw, Impeller (1/2-13 x 1.25) Stainless steel 520 Washer, Impeller Series stainless steel 529 Nut, Hex (3/8-16 JAM) (2 pack) CAD-plated steel 530A Capscrew, Hex (3/8-16 x 1.00) (10 pack) CAD-plated steel 530B Capscrew, Hex (1/2-13 x 1.25) (4 pack) CAD-plated steel 530C Capscrew, Hex (3/8-16 x 1.00) (4 pack) CAD-plated steel 531 Stud, Threaded (2 pack) CAD-plated steel 550 Screws, Drive (set of 2) Stainless steel SEAL KITS 4 X 6-10 Type Included Part No. Part No. Packing 12B, 13, 14, 100A, 100B
12 6 X 8-10L A D 530F B B 530B 530A 500A 100C D C 21 - PACKING GLAND ASSEMBLY 500A E 12
13 Fig. Part Description Part No. Materials 1 Volute, Case ASTM 536 ductile iron 2 Impeller (9.5" dia., 1-1/4" bore) ASTM 536 ductile iron 3 Bracket ASTM 536 ductile iron 4 Wear Ring SAE 660 bronze 11 Stuffing Box ASTM 536 ductile iron 12B Shaft Sleeve, Packing SAE 660 bronze 13 Packing Rings (set of 5) Graphite yarn w/ptfe 14 Lantern Ring PTFE 15 Packing Gland (set of 2) Series stainless steel 21 Packing Gland Assembly Various 22 Foot Ductile iron 23 Suction Spool Ductile iron 24 Clean-out Cover Ductile iron 35 Key, Shaft Series stainless steel 100A O-ring, Volute Nitrile 100B O-ring, Stuffing/Seal Box Nitrile 100C O-ring, Suction Spool Nitrile 100D O-ring, Clean-out Cover Nitrile 110 Nameplate Stainless steel 500A Pipe Plug (3/8" NPT) (4 pack) CAD-plated steel 500C Pipe Plug (1/4" NPT) CAD-plated steel 510 Screw, Impeller (1/2-13 x 1.25) Stainless steel 520 Washer, Impeller Series stainless steel 529 Nut, Hex (3/8-16 JAM) (2 pack) CAD-plated steel 530A Capscrew, Hex (3/8-16 x 1.00) (10 pack) CAD-plated steel 530B Capscrew, Hex (1/2-13 x 1.25) (4 pack) 8.5AK CAD-plated steel 530B Capscrew, Hex (5/8-11 x 1.25) (4 pack) 12.5AK CAD-plated steel 530C Capscrew, Hex (3/8-16 x 1.00) (4 pack) CAD-plated steel 530D Capscrew, Hex (3/8-16 x 1.00) (8 pack) CAD-plated steel 530E Capscrew, Hex (5/8-11 x 1.75) (2 pack) CAD-plated steel 530F Capscrew, Hex (1/2-13 x 1.00) (2 pack) CAD-plated steel 531 Stud, Threaded (2 pack) CAD-plated steel 550 Screws, Drive (set of 2) Stainless steel SEAL KITS 6 X 8-10L 6 X 8-10L Type Included Part No. Part No. Packing 12B, 13, 14, 100A, 100B
14 6 X A D 530F B B 530B 530A 500A 100C D C 21 - PACKING GLAND ASSEMBLY 500A E 14
15 Fig. Part Description Part No. Materials 1 Volute, Case ASTM 536 ductile iron 2 Impeller (10.25" dia., 1-1/4" bore) ASTM 536 ductile iron 3 Bracket ASTM 536 ductile iron 4 Wear Ring SAE 660 bronze 11 Stuffing Box ASTM 536 ductile iron 12B Shaft Sleeve, Packing SAE 660 bronze 13 Packing Rings (set of 5) Graphite yarn w/ptfe 14 Lantern Ring PTFE 15 Packing Gland (set of 2) Series stainless steel 21 Packing Gland Assembly Various 22 Foot Ductile iron 23 Suction Spool Ductile iron 24 Clean-out Cover Ductile iron 35 Key, Shaft Series stainless steel 100A O-ring, Volute Nitrile 100B O-ring, Stuffing/Seal Box Nitrile 100C O-ring, Suction Spool Nitrile 100D O-ring, Clean-out Cover Nitrile 110 Nameplate Stainless steel 500A Pipe Plug (3/8" NPT) (4 pack) CAD-plated steel 500C Pipe Plug (1/4" NPT) CAD-plated steel 510 Screw, Impeller (1/2-13x2.25) Stainless steel 520 Washer, Impeller Series stainless steel 529 Nut, Hex (3/8-16 JAM) (2 pack) CAD-plated steel 530A Capscrew, Hex (3/8-16 x 1.00) (10 pack) CAD-plated steel 530B Capscrew, Hex (1/2-1 3x 1.25) (4 pack) 8.5AK CAD-plated steel 530B Capscrew, Hex (5/8-11 x 1.25) (4 pack) 12.5AK CAD-plated steel 530C Capscrew, Hex (3/8-16 x 1.00) (4 pack) CAD-plated steel 530D Capscrew, Hex (3/8-16 x 1.00) (8 pack) CAD-plated steel 530E Capscrew, Hex (5/8-11 x 1.75) (2 pack) CAD-plated steel 530F Capscrew, Hex (1/2-13 x 1.00) (2 pack) CAD-plated steel 531 Stud, Threaded (2 pack) CAD-plated steel 550 Screws, Drive (set of 2) CAD-plated steel SEAL KITS 6 X X 8-10 Type Included Part No. Part No. Packing 12B, 13, 14, 100A, 100B
16 8 502B BEARING FRAME 530A 26B A 500A A B 500A 500B B 16
17 Fig. Part Description Part No. Materials 5 Shaft Stressproof 6 Bearing Frame ASTM 536 ductile iron 8 SAE Housing See SAE Options ASTM 536 ductile iron 16 Bearing, Pump Side Steel 17 Bearing, Drive Side Steel 22 Foot (2 pack) ASTM 536 ductile iron 26A Lip Seal, Pump Side Nitrile 26B Lip Seal, Drive Side Nitrile 27 Hand Guard, SAE See Table 1 12GA steel 35 Key (1/2" x 1/2" x 4") Series stainless steel 36 Plate, Bearing Frame CRS plate 37 Shim (0.005") Series stainless steel 37 Shim (0.010") Series stainless steel 37 Shim (0.015") Series stainless steel 500A Pipe Plug (1/2" NPT) (2 pack) CAD-plated steel, grade S 500B Pipe Plug (3/4" NPT) CAD-plated steel, grade S 502A Fitting, Grease Steel 502B Fitting, Grease Steel 503 Water Slinger Neoprene 530A Capscrew, Hex (5/8-1 x 1.50) (4 pack) CAD-plated steel, grade S 530B Capscrew, Hex (5/8-1 x 1.75) (4 pack) CAD-plated steel, grade S 530C Capscrew, Hex (5/8-1 x 1.25) (2 pack) CAD-plated steel, grade S 532 Screw, Set CAD-plated steel, grade S SAE OPTIONS BEARING FRAME BEARING FRAME Type SAE Housing SAE Hand Guard SAE # SAE # SAE # SAE #
18 NOTES
19 NOTES
20 Franklin Electric 9255 Coverdale Road Fort Wayne, Indiana franklinwater.com Mi
CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
CENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES
FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
CENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed
CENTRIFUGAL PUMPS HYDRAULIC DRIVEN 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; double keyed for improved reliability
CENTRIFUGAL PUMPS WATER TRUCK 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Cast iron enclosed design for high efficiency; double keyed for improved reliability
Truck Pumps Water XS439 XS869
Truck Pumps Water XS439 XS869 Water Truck 9" BOOK: WTP-005 DATE: Jan. 1, 2012 Features: Volute: Heavy cast iron construction. Back pullout design. Can be rotated for ease of installation. Impeller: Double
CENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS
FEATURES Volute: Ductile iron rugged construction. Self-priming with priming and drain plugs. Removable front cover features a built-in check valve to facilitate priming Impeller: Cast iron semi-open,
SUBMERSIBLE TURBINE PUMPS
FEATURES 1% factory wet tested with test results shipped with each pump Hydraulic optimization for exceptional abrasive handling Ductile iron motor bracket and discharge for extended pump life Premium
SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES
FEATURES Stainless steel impellers and diffusers to resist corrosion Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than
SUBMERSIBLE TURBINE PUMPS
FEATURES 100% factory wet tested with test results shipped with each pump Premium ductile iron casting for long life and high pressures Longer discharge and motor bracket bearings for increased pump life
SUBMERSIBLE TURBINE PUMPS
FEATURES 1% Franklin Electric factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES SPECIFICATIONS APPLICATIONS
FEATURES n Stainless steel impellers and diffusers to resist corrosion n Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures
SUBMERSIBLE TURBINE PUMPS
" STS SERIES - GPM FEATURES % factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
SUBMERSIBLE TURBINE PUMPS
FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for abrasive
Centrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
NC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
B/M No. Shaft Kit available for this model, P/N B Refer to Supplement-C of this section for list of components included with kit.
BJQBM Page 0. Date March 4, 03 Supersedes 0/0/04 8B 3 3C 8 B/M Mtg. Spline B0 H0598 M083 -/-0T 3" B08 H059 M083 -/-0T 3" B08 3 H059 M083 -/-0T 3" B08 4 H0595 M083 -/-0T 3" Kit available for this model,
Berkeley Cast Iron Impeller B1-1/2ZPH ELECTRIC MOTOR DRIVE. Threaded Case (NPT), Packing Construction. Table I. Table II
Cast Iron Impeller B-/ZPH Threaded Case (NPT), Packing Construction Page 50. Date March 4, 03 Supersedes 07/0/ 3 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B53759 5 3 3600 -/4" 7.94" M07666 B596 0 3 3600 -/4"
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
High Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
Berkeley Cast Iron Impeller B6EXQBH SAE ENGINE MOUNT. Flanged Case, Packing Construction. Table I. Page Date March 4, 2013 Supersedes 01/01/04
BEXQBH Page. 8 83 84 ( X scale ) 3 3 5A 8 B/M Mtg. Spline B00 H05398 H053 -/-0T 3" Kit available for this model, P/N B9. Refer to Supplement-C of this section for list of components included with kit.
ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
franklinwater.com 50 Hz 6" STS SERIES Submersible Turbine Pumps
franklinwater.com 5 Hz 6" STS SERIES Submersible Turbine Pumps 2 FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump
Goulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
AURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
Berkeley Cast Iron Impeller B4JPBH ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II
B4JPBH Flanged Case, Packing Construction Page 0. Date March 4, 03 Supersedes 0/0/04 80B 80B 3 See Supplement B 8 4 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B588 0 3 800 -/4" 0.06" L0680 B5883 5 3 800 -/4"
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL SERIES 8150 CROSS SECTION 0-952-3 0-952-4 0-952-5 2-904-2 0-952-2 0-952-1 0-952-6 2-001-0 2-916-1 2-904-1 2-123-5 0-905-0
Axially Split Case Pumps
Axially Split Case Pumps A-C Pump A-C SPL Standard Design Features for a Wide Range of Heavy Duty In STUFFING BOX Packing is standard on the A-C products. A wide variety of mechanical seals, including
CSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps
CSO/CP Series SAM Engineering (Pty) Ltd. 2 Duncan Road, Lilianton, Boksburg, South Africa Tel: +27 (0) 23 Fax: +27 (0) 2393 Email: pumps@sameng.co.za www.sameng.co.za Alloys to suit all applications Proud
Basic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38
CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 1 ease of installation & maintenance Install like a valve Mount in the pipeline Support on pipe or foundation... Save space - save time
900 Series Split Case Fire Pump Systems
BULLETIN 900/REV. E 900 Series Split Case Fire Pump Systems MODEL 481 MODEL 483 FM Approved U L Listed motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48
Berkeley Cast Iron Impeller B6ZPL ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II
B6ZPL Flanged Case, Packing Construction Page 350. 80B 80B 3 B509 0 -/4" 6."x8.5" M078 B5 0 3 -/4" 6."x8.5" M078 B548 5 3 -/4" 7.56"x8.56" M079 B54 0 3 -/4" 8.00"x9.00" M04348 7 80A 80A 6 Case, Volute
V6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
SUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
Model 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
Index - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
A-C Fire Pump Systems FP 2.4 Page 1
ENG. DATA Page 1 February, 1996 Supersedes 5/95 issue FP 2.4 Page 2 A-C Fire Pump Systems 49-139 140-206 54-130 131-256 71-150 10WALC 10WALC 11CLC 11CLC 11CHC 500 500 750 Max Working Pressure (G) 175 psi
VERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized
ASME END SUCTION PUMPS Catalogue K-90
ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the
VERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
CALCULATION OF BOWL HEAD OR DISCHARGE HEAD
February, 1996 Supersedes 5/95 issue CALCULATION OF BOWL HEAD OR Pressure Gauge hd (Discharge Head) hl (LIFT) hp (Internal Pump Loss) Setting Sump Depth Pump O.A.L. Pumping Water Level hb (Bowl Head) For
Fire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
HORIZONTAL SPLIT CASING PUMP
HORIZONTAL SPLIT CASING PUMP HORIZONTAL PUMP CONSTRUCTION MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance,
BSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
8" Submersible Turbine Pump 450 GPM
8" Submersible Turbine Pump 450 GPM Submersible Turbine Pumps Features Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 23 2123 - PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Bearing Frame Mount CAST IRON IMPELLER B4EYRMBM TYPE B SINGLE STAGE CENTRIFUGAL PUMP TABLE I
Page 0. Date November, 009 B4EYRMBM Packing Construction 3 8 B/M No. Rotation Case Diameter B50 CW M5 L09.88 80 A 3 See Supplement B 9 3 See Table I Shaft (Not sold separately) See Note 9 Cover, Suction
Casing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS
Casing Impeller Gland Shaft Bearing Bracket Support Foot RANGE APPLICATIONS Delivery size : up to 150 mm Capacity Head 3 : up to 550 m /hr : up to 100 metres Circulation of water in industries, Air-conditioning
TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
340 Series Double Suction Split Case Pumps
340 Series Double Suction Split Case Pumps Flows to: 30,000+ GPM Heads to: 550 Feet Temperatures to: 250 F 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America,
60 HZ SSI SERIES Submersible Stainless Steel Pumps 6", 8", 10" QUOTE WITH. franklinwater.com
6 HZ SSI SERIES Submersible Stainless Steel Pumps 6", 8", 1" QUOTE WITH franklinwater.com 6 HZ SSI SERIES SUBMERSIBLE PUMPS Overview...2 Features...2 Applications...2 Specifications...2 Model No. Explanation...2
Application & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump
Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November
PROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells
FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,
BSM ROTARY GEAR PUMPS
FT. MTD. PUMP The Heavy Duty S-Series pumps are designed to handle a wide variety of liquids and are particularly suitable for bulk transfer applications where long life and dependable service is required.
900 Series. 2000/2500 GPM High Head. Expanding our line to meet your needs. Model Latest Addition to the Aurora Fire Pump Line
Latest ddition to the urora Fire Pump Line 9 Series /2 GPM High Head Model FLOWS@PESSUES GPM 11-214 PSI 2 GPM 115-215 PSI SPEEDS Diesel Electric PM 148 PM 17 PM 177 PM Max case working pressure 3 PSI Expanding
BSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
POWERFORCE PUMP POWERFORCE PUMP POWERFORCE PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY
POWERFORCE PUMP POWERFORCE PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY POWERFORCE Hard Iron Centrifugal Pump Parts Item Description Qty Part Number Reference
D Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006
D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation
Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
Elite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
PRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: B C D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.
YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION PUMP MODELS 4310-1C A B C D E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD
3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
Bulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
1100 Series Multi-Stage Vertical Turbine Pumps
1100 Series Multi-Stage Vertical Turbine Pumps Capacities to 40,000 GPM Heads to 1,500 Feet Temperatures to 200 F Water Lubricated Open Lineshaft Vertical Hollow Shaft Motor The vertical hollow shaft motor
UNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
HORIZONTAL MULTI STAGE PUMPS
HORIZONTAL MULTI STAGE PUMPS APPLICATIONS Water supply Hot/cold water Sprinklers Agriculture Construction Factories Mines Boiler feed Other general high pressure services *Please choose the model, referring
Six-Inch Submersible Pumps
FW1 87 5 thru 5 5 to GPM Supersedes Six-Inch Submersible Pumps Series 6P and 6T High capacity six-inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
Series 1510 Centrifugal Pumps
Series 1 Centrifugal Pumps B-207H Table of Contents Useful Pump Formulas... 2 Standard Features... 3 Technical Data... Materials of Construction... Selection Charts... 6 Performance Curves... 7 Centrifugal
Engineers Without Borders
Engineers Without Borders Proposal No: JI12-02-07 04 Item No: ITEM 001 February 7, 2012 Attn: Adam MODEL:VIT-CATM Size:7CHC 10 Stage(s) QTY:1 Operating conditions SERVICE LIQUID LIQUID TYPE CAPACITY RATED
UNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
barmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
GEAR PUMPS TOUGH INTERNAL GEAR SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE
TOUGH INTERNAL GEAR GEAR PUMPS SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products,
F-Series Fire Fighting Pumps
F-Series Fire Fighting Pumps VISION To be a leading local manufacturer and reliable partner providing engineered products and solutions to our customers. MISSION Supporting the socio-economic development
PWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
Bulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program
Bulletin BX-4C Bell & Gossett VSC /VSCS Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Program VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION
Axial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality.
PRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.
YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION A B D C E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD ISSUE 12/05 PAGE 6707
UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM
KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM Description Range : Delivery size up to 150 mm Capacity up to 470 m 3 /hr Head up to 180 metres Application : Suitable for Water Works, Circulation
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
Model 3656/3756. Installation, Operation and Maintenance Instructions. Table of Contents. Owner s Information
Installation, Operation and Maintenance Instructions Model 656/756 Owner s Information Please fill in information and give this booklet to homeowner. Warranty information is on page 12. Model Number: Serial
ISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
UNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options