SUBMERSIBLE TURBINE PUMPS

Size: px
Start display at page:

Download "SUBMERSIBLE TURBINE PUMPS"

Transcription

1 FEATURES 1% Franklin Electric factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for harsh environments 41 stainless steel pump shaft ground and polished for maximum durability Investment cast stainless steel impellers for maximum abrasion resistance Custom pumps available SPECIFICATIONS " minimum well I.D. 1' minimum submergence above inlet 3"/4" NPT discharge 75 psi standard maximum working pressure APPLICATIONS Irrigation Agricultural Industrial Municipal Commercial

2 PERFORMANCE METERS FEET % HP (12 STG) 7% 5% EFFICIENCY HP ( STG) HP ( STG) HP (5 STG) HP (3 STG) HP (2 STG) USGPM LPS M 3 /HR 2 RECOMMENDED OPERATING RANGE NOTE: Performance based on 8 F fresh water; " 5-4 hp motor at 345 rpm

3 PERFORMANCE METERS FEET 24 75% HP (3 STG) 7% 5% EFFICIENCY HP (3 STG) HP (24 STG) HP (18 STG) HP (15 STG) USGPM LPS M 3 /HR RECOMMENDED OPERATING RANGE NOTE: Performance based on 8 F fresh water; " 5-4 hp motor at 345 rpm; " 5 hp motor at 3475 rpm; " hp motor at 348 rpm 3

4 DIMENSIONS METERS FEET TRIM A SINGLE-STAGE TRIM B 7% TRIM C 7% 73% 74% 73% 72% 72% 8% Efficiency Correction 1-Stage % 2-Stage 1% 3-Stage % 3 7% % HP kw TRIM A TRIM B TRIM C USGPM LPS M 3 /HR 4 NOTE: Efficiencies are typical and not guaranteed. Efficiency correction required for low stage count. Pumps are intentionally designed to utilize some portion of the motor's 1.15 service factor. Nominal RPM is 345.

5 DIMENSIONS Power Stages Trim Motor Pump Length MD* Motor Wt. Pump Wt. HP kw Size in mm in mm lbs kg lbs kg A 1B 4" A " A 3B " A " A " A " A " A " A " A " A " NOTE: *MD diameter = Franklin Electric Motor, M = Maximum Length of Franklin Electric Motor DIMENSIONS PUMP ENDS Power Stages Trim Motor Shipping Wt. Size Discharge Order No. Description HP kw lbs kg A 1B 4" STS3D5X A " STS5D5A A 4" STS5D5A A 3B " STS7D5X A 3B 4" STS7D5X A " STS1D5A A 4" STS1D5A " NPT A " STS15D5A A " STS2D5A A " STS25D5A A " STS3D5A A " STS4D5A A " STS5D5A A " STSD5A P M MD 5.4" DIMENSIONS IMPELLER Trim A Diameter C Angle A 4.55" / 13. mm 15.5 B 3.8" / 8.2 mm 15.5 C 3.81" / 3.5 mm 15.5 A C 5

6 REPAIR PARTS Item No. Part Description Part No. Qty. Per 1,2 Upthrust Bolt/Nut Kit " NPT Discharge (no top bearing) " NPT Discharge (no top bearing) Top Bearing, Bronze (included in 5) As Req. 5 Top Bowl w/bronze Top Bearing As Req. Bowl Bolt Kit (12 pieces) Bowl Bolt Kit (1 pieces) As Req. 5"/" Bowl Bearing, Bronze (included in 8) "/" Bowl Bearing, Rubber (included in 8) As Req. 5"/" Bowl Bearing, FKM (included in 8) Bowl and Bearing Assembly, Bronze Bowl and Bearing Assembly, Rubber Bowl and Bearing Assembly, FKM As Req. Bowl Only (no bearing installed) Taper Lock Collet Kit (included in 1) As Req. 1 Sand Cap w/set Screws Motor Bracket Bearing, Bronze (included in ) " Motor Bracket w/bronze Bearing " Motor Bracket w/bronze Bearing As Req. 13 Suction Screen w/drive Screws " Cable Guard Screw Kit (4 pieces) " Cable Guard Clamp " Motor Coupling " Motor Coupling " Motor Nut Kit 3531 " Motor Bolt Kit Nameplate w/drive Screws Owner's Manual REPAIR PARTS IMPELLER Item No. Description Diameter in mm Angle Kit w/ Collet A Trim B Trim C Trim NOTE: Shaft and cable guard information located on the following pages ,

7 REPAIR PARTS Item No. 5" x " Shaft - 5" Pump w/" Motor Bracket Stages Length Shaft Part No. in mm 41 SS Chrome Hardened , " & " 41 SS Shaft (Double Keyed) Part No. Length ft m

8 REPAIR PARTS 5" x " Cable Guard (Precut) - 5" Pump w/" Motor Bracket Item No. Stages Length Cable Guard No. in mm Order No. 2nd Piece (As Req.) * 52* * 3* * 732* * 833* * 35* * 137* * 1138* * 124* * 1341* * 43* * 1545* * * *Cable guard length equals the length of the second piece 5" Cable Guard (Bulk) Item No. Description Length in mm Part No. 22 Cable Guard (1' Section) ,

9 MATERIALS Part Name Common Material Name Material Specification No. Discharge Bracket Ductile iron ASTM A Top Bowl Ductile iron ASTM A Intermediate Bowl Ductile iron ASTM A Bearings, Discharge, and Suction Bronze ASTM 8584 C8835 Impeller 34 Stainless steel ASTM A743/A743M CF8 Pump Shaft 41 Stainless steel ASTM A582 S41 Suction Bracket Ductile iron ASTM A Bowl Bearing Rubber Rubber Sand Collar 3 Stainless steel ASTM A Suction Screen 32 Stainless steel ASTM A24 S32 Cable Guard 3 Stainless steel ASTM A Shaft Coupling 41 Stainless steel ASTM A582 S41 Upthrust Bolt 3 Stainless steel ASTM A Taper Lock 41 Stainless steel ASTM A582 S41 Bolting 3 Stainless steel ASTM A Cable Guard Clamp 3 Stainless steel - NOTE: Bowl bearing and shaft options available; Contact customer service for available options

10 NOTES

11 NOTES

12 Franklin Electric 255 Coverdale Road Fort Wayne, Indiana 48 franklinwater.com Mi 1-17

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS FEATURES 100% factory wet tested with test results shipped with each pump Premium ductile iron casting for long life and high pressures Longer discharge and motor bracket bearings for increased pump life

More information

5" Submersible Turbine Pump 220 GPM

5 Submersible Turbine Pump 220 GPM 5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life

More information

5" Submersible Turbine Pump 120 GPM

5 Submersible Turbine Pump 120 GPM 5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS " STS SERIES - GPM FEATURES % factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for abrasive

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS FEATURES 1% factory wet tested with test results shipped with each pump Hydraulic optimization for exceptional abrasive handling Ductile iron motor bracket and discharge for extended pump life Premium

More information

franklinwater.com 50 Hz 6" STS SERIES Submersible Turbine Pumps

franklinwater.com 50 Hz 6 STS SERIES Submersible Turbine Pumps franklinwater.com 5 Hz 6" STS SERIES Submersible Turbine Pumps 2 FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump

More information

8" Submersible Turbine Pump 450 GPM

8 Submersible Turbine Pump 450 GPM 8" Submersible Turbine Pump 450 GPM Submersible Turbine Pumps Features Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life

More information

CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS

CENTRIFUGAL PUMPS CLOSE-COUPLED 9 FEATURES SPECIFICATIONS APPLICATIONS FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced

More information

CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES

CENTRIFUGAL PUMPS 7.5 FRAME MOUNT SERIES FEATURES FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;

More information

Berkeley 8T-550 Submersible Turbine

Berkeley 8T-550 Submersible Turbine Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)

More information

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES

CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10 FEATURES FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics

More information

CENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES

CENTRIFUGAL PUMPS CLOSE-COUPLED 7.5 FEATURES FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;

More information

SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES

SUBMERSIBLE PUMPS 6 STAINLESS STEEL SR SERIES FEATURES FEATURES Stainless steel impellers and diffusers to resist corrosion Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than

More information

SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES SPECIFICATIONS APPLICATIONS

SUBMERSIBLE PUMPS 6 STAINLESS STEEL SR SERIES FEATURES SPECIFICATIONS APPLICATIONS FEATURES n Stainless steel impellers and diffusers to resist corrosion n Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures

More information

50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells

50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,

More information

Submersible Turbine Pumps

Submersible Turbine Pumps Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water

More information

VERTICAL MULTI-STAGE PUMPS

VERTICAL MULTI-STAGE PUMPS VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized

More information

VERTICAL MULTI-STAGE PUMPS

VERTICAL MULTI-STAGE PUMPS VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings

More information

SUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T

SUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T SUBMERSIBLE PUMPS FW85 47 Supersedes 25 FOR 6 through 8 WELLS Series 6P, 6T and 8T High capacity 5, 6 or 7 submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large

More information

CENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES

CENTRIFUGAL PUMPS 13 CLOSE-COUPLED FEATURES FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed

More information

CENTRIFUGAL PUMPS HYDRAULIC DRIVEN 9" FEATURES SPECIFICATIONS APPLICATIONS

CENTRIFUGAL PUMPS HYDRAULIC DRIVEN 9 FEATURES SPECIFICATIONS APPLICATIONS FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; double keyed for improved reliability

More information

CENTRIFUGAL PUMPS WATER TRUCK 9" FEATURES SPECIFICATIONS APPLICATIONS

CENTRIFUGAL PUMPS WATER TRUCK 9 FEATURES SPECIFICATIONS APPLICATIONS FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Cast iron enclosed design for high efficiency; double keyed for improved reliability

More information

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high

More information

PRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: B C D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.

PRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: B C D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION PUMP MODELS 4310-1C A B C D E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD

More information

Six-Inch Submersible Pumps

Six-Inch Submersible Pumps FW1 87 5 thru 5 5 to GPM Supersedes Six-Inch Submersible Pumps Series 6P and 6T High capacity six-inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water

More information

CENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS

CENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS FEATURES Volute: Ductile iron rugged construction. Self-priming with priming and drain plugs. Removable front cover features a built-in check valve to facilitate priming Impeller: Cast iron semi-open,

More information

franklinwater.com 50 Hz 4 SUBMERSIBLE PUMPS

franklinwater.com 50 Hz 4 SUBMERSIBLE PUMPS franklinwater.com 50 Hz 4 SUBMERSIBLE PUMPS 01 4 SUBMERSIBLE PUMPS 4400 Tri-Seal Pumps 3 18 LPM Tri-Seal 5 25 LPM Tri-Seal 7 30 LPM Tri-Seal 9 45 LPM Tri-Seal 11 60 LPM Tri-Seal 13 70 LPM Tri-Seal 15 4400

More information

Aermotor 4 SUBMERSIBLE PUMPS 35, 50, 75, 90 GPM A+ SUPER SUB Series stainless steel

Aermotor 4 SUBMERSIBLE PUMPS 35, 50, 75, 90 GPM A+ SUPER SUB Series stainless steel A+ SUPER SUB Series stainless steel The A+ Super Sub Series Stainless Steel 4 Submersible Pumps deliver efficient and dependable performance even in rough, aggressive water. Heads to 640 feet and capabilities

More information

APPLICATIONS Water systems for municipal, multiple housing, commercial, in water fountains, irrigation, mine de-watering, and farm use.

APPLICATIONS Water systems for municipal, multiple housing, commercial, in water fountains, irrigation, mine de-watering, and farm use. 7, 115, 14, 155, 23 and 3 GPM The Submersible features heavy-duty 34 stainless steel construction that will out perform ordinary fabricated stainless steel pumps in aggressive water conditions. APPLICATIONS

More information

Selection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY

Selection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170

More information

REDUCED DIAMETER SUBMERSIBLE PUMPS

REDUCED DIAMETER SUBMERSIBLE PUMPS 3200 SERIES REDUCED DIAMETER SUBMERSIBLE PUMPS The 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric

More information

V6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012

V6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012 BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent

More information

PRODUCT CATALOG SUBMERSIBLE PUMPS RESIDENTIAL & LIGHT COMMERCIAL. franklinwater.com

PRODUCT CATALOG SUBMERSIBLE PUMPS RESIDENTIAL & LIGHT COMMERCIAL. franklinwater.com PRODUCT CATALOG SUBMERSIBLE PUMPS RESIDENTIAL & LIGHT COMMERCIAL franklinwater.com SUBMERSIBLE PUMPS Model Number Nomenclature...2 4" 32 Series Pumps...4 Ordering Information...5 5 gpm...6 7 gpm...8 1

More information

PRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.

PRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION A B D C E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD ISSUE 12/05 PAGE 6707

More information

ISO 2858 Back Pullout End Suction Centrifugal Pumps

ISO 2858 Back Pullout End Suction Centrifugal Pumps ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed

More information

ITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6" Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity

ITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6 Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity Goulds Pumps 7L, 9L, 15L, 2L, 3L Stainless Steel 6" Submersible Pumps 6 Hz High Capacity For 6" and larger wells Goulds Pumps is a brand of ITT Residential and Commercial Water. www.goulds.com Engineered

More information

Flow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS " CCW " CCW

Flow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS  CCW  CCW 6 Hz LS EXTENSION 4" Submersible Pumps MODEL LS 5LS, 7LS, LS, LS, 8LS, 25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor

More information

Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution

Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor

More information

BOOSTER PUMPS PRODUCT FAMILY APPLICATIONS FAMILY COMPARISON CHART

BOOSTER PUMPS PRODUCT FAMILY APPLICATIONS FAMILY COMPARISON CHART BOOSTER PUMPS Franklin s booster pumps feature a stainless steel construction and are designed to meet any pressure-boosting need. The selection is available in a range of horsepower sizes, in single-

More information

Selection Chart. SC Series 6 inch (150mm) Submersible Borehole Pumps PERFORMANCE DATA SC65 SC50 SC30 SC18 TOTAL HEAD FEET Q (LITRES PER MINUTE)

Selection Chart. SC Series 6 inch (150mm) Submersible Borehole Pumps PERFORMANCE DATA SC65 SC50 SC30 SC18 TOTAL HEAD FEET Q (LITRES PER MINUTE) PERFORMANCE DATA Selection Chart TOTAL HEAD FEET 450 400 350 300 250 200 150 100 50 0 GALLONS PER MINUTE 0 50 100 150 200 250 300 SC18 SC30 SC50 SC65 0 200 400 600 800 1000 1200 1400 Q (LITRES PER MINUTE)

More information

60 HZ SSI SERIES Submersible Stainless Steel Pumps 6", 8", 10" QUOTE WITH. franklinwater.com

60 HZ SSI SERIES Submersible Stainless Steel Pumps 6, 8, 10 QUOTE WITH. franklinwater.com 6 HZ SSI SERIES Submersible Stainless Steel Pumps 6", 8", 1" QUOTE WITH franklinwater.com 6 HZ SSI SERIES SUBMERSIBLE PUMPS Overview...2 Features...2 Applications...2 Specifications...2 Model No. Explanation...2

More information

ITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6" Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems

ITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6 Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems B65-32L ITT Residential Water Systems Goulds s 65L, 95L, 12L, 16L, 2L, 32L 6" Stainless Steel Submersible s 6 Hz High Capacity For 6" and larger wells Goulds s is a brand of ITT Corporation. www.goulds.com

More information

TECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 10SB & 18SB 5-18 GPM, ½ 1½ HP, 60 HZ SUBMERSIBLE PUMPS

TECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 10SB & 18SB 5-18 GPM, ½ 1½ HP, 60 HZ SUBMERSIBLE PUMPS TECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 1SB & 18SB 5-18, ½ 1½ HP, 6 HZ SUBMERSIBLE PUMPS FEATURES Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand

More information

PROGRESSIVE CAVITY ELECTRIC SUBMERSIBLE PUMP SYSTEM ARTIFICIAL LIFT SYSTEMS. franklin-energy.com

PROGRESSIVE CAVITY ELECTRIC SUBMERSIBLE PUMP SYSTEM ARTIFICIAL LIFT SYSTEMS. franklin-energy.com ARTIFICIAL LIFT SYSTEMS PROGRESSIVE CAVITY ELECTRIC SUBMERSIBLE PUMP SYSTEM Designed specifically for coalbed methane and shale gas applications, Franklin s progressive cavity pump and CBM+ motor are designed

More information

F-Series Fire Fighting Pumps

F-Series Fire Fighting Pumps F-Series Fire Fighting Pumps VISION To be a leading local manufacturer and reliable partner providing engineered products and solutions to our customers. MISSION Supporting the socio-economic development

More information

100H, 150H, 225H, 275H

100H, 150H, 225H, 275H TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the

More information

ITT. Engineered for Life. GS Subs, New Guardian System and You, Stronger Together!

ITT. Engineered for Life. GS Subs, New Guardian System and You, Stronger Together! GS Subs, New Guardian System and You, Stronger Together! GS Submersibles have always had a reputation for being reliable and tough pumps. Now the best is even better! The new Guardian System now makes

More information

ITT. Goulds Pumps 45J and 70J. Engineered for life B45-70J. Residential Water Systems. Features. 60 Hz High Capacity Flat Bowl 6" Submersible Pumps

ITT. Goulds Pumps 45J and 70J. Engineered for life B45-70J. Residential Water Systems. Features. 60 Hz High Capacity Flat Bowl 6 Submersible Pumps B45-7J Goulds Pumps 45J and 7J Hz High Capacity Flat Bowl 6" Submersible Pumps For 6" and larger wells Goulds Pumps is a brand of Corporation. www.goulds.com Engineered for life Features n Powered for

More information

Table of Contents. 4 Submersible Pumps

Table of Contents. 4 Submersible Pumps 5 Hz 4 Submersible Pumps Table of Contents 4 Submersible Pumps 44 Tri-Seal Pumps... 2 18 LPM Tri-Seal... 5 25 LPM Tri-Seal... 7 3 LPM Tri-Seal... 9 45 LPM Tri-Seal... 11 6 LPM Tri-Seal... 13 7 LPM Tri-Seal...

More information

5LS, 7LS, 10LS, 13LS, 18LS & 25LS 5-25 GPM, ½ 1½ HP, 60 HZ, SUBMERSIBLE PUMPS

5LS, 7LS, 10LS, 13LS, 18LS & 25LS 5-25 GPM, ½ 1½ HP, 60 HZ, SUBMERSIBLE PUMPS TECHNICAL BROCHURE B5-25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without

More information

1100 Series Multi-Stage Vertical Turbine Pumps

1100 Series Multi-Stage Vertical Turbine Pumps 1100 Series Multi-Stage Vertical Turbine Pumps Capacities to 40,000 GPM Heads to 1,500 Feet Temperatures to 200 F Water Lubricated Open Lineshaft Vertical Hollow Shaft Motor The vertical hollow shaft motor

More information

Environmental Submersible Pumps

Environmental Submersible Pumps Environmental Submersible Pumps Grundfos 475S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated

More information

5GS, 7GS, 10GS, 13GS, 18GS & 25GS 5-25 GPM, ½ 5 HP, 60 HZ, SUBMERSIBLE PUMPS

5GS, 7GS, 10GS, 13GS, 18GS & 25GS 5-25 GPM, ½ 5 HP, 60 HZ, SUBMERSIBLE PUMPS TECHNICAL BROCHURE B5-25GS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without

More information

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering

More information

V-Series. 50 Hz. Plastic Submersible Pumps V6P ISO-9001

V-Series. 50 Hz. Plastic Submersible Pumps V6P ISO-9001 V-Series ISO-91 Plastic Submersible Pumps V6P z Evak Pump Technology Corp. No. 1, Zhongshan Rd., Qingshui Dist., Taichung City 36, Taiwan. Tel : +8-6-2336 Fax: +8-6-239 www.evak-pumps.com Vol. PIV6P-11

More information

Environmental Submersible Pumps

Environmental Submersible Pumps Environmental Submersible Pumps Grundfos 385S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated

More information

ITT GS-CBM. Goulds Pumps. Engineered for life B5-75GSX. Residential Water Systems. GS Xtreme 60 Hz 4" Submersible Pumps FEATURES

ITT GS-CBM. Goulds Pumps. Engineered for life B5-75GSX. Residential Water Systems. GS Xtreme 60 Hz 4 Submersible Pumps FEATURES B5-75GSX ITT Residential Water Systems Goulds Pumps GS-CBM Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life GS Xtreme 6 Hz 4" Submersible Pumps FEATURES n Field Proven Design:

More information

CALCULATION OF BOWL HEAD OR DISCHARGE HEAD

CALCULATION OF BOWL HEAD OR DISCHARGE HEAD February, 1996 Supersedes 5/95 issue CALCULATION OF BOWL HEAD OR Pressure Gauge hd (Discharge Head) hl (LIFT) hp (Internal Pump Loss) Setting Sump Depth Pump O.A.L. Pumping Water Level hb (Bowl Head) For

More information

ELECTRIC SUBMERSIBLE. ESP Pumping Systems. franklin-energy.com

ELECTRIC SUBMERSIBLE. ESP Pumping Systems. franklin-energy.com ELECTRIC SUBMERSIBLE ESP Pumping Systems franklin-energy.com ESP Pumping Systems Franklin Electric s submersible pumps feature proven hydraulic components. Designed for marginal oil and gas wells, our

More information

TECHNICAL BROCHURE B5-75GSX. GS-CBM GS Xtreme 60 HZ, 4" SUBMERSIBLE PUMPS

TECHNICAL BROCHURE B5-75GSX. GS-CBM GS Xtreme 60 HZ, 4 SUBMERSIBLE PUMPS TECHNICAL BROCHURE B5-75GSX GS-CBM GS Xtreme 6 HZ, 4" SUBMERSIBLE PUMPS FEATURES Field Proven Design: The GS Xtreme features super strong construction due to the welded casing joints at both ends. The

More information

ENGINE DRIVEN CENTRIFUGALS. franklinwater.com

ENGINE DRIVEN CENTRIFUGALS. franklinwater.com ENGINE DRIVEN CENTRIFUGALS Franklin Electric has the gas engine pump for your irrigation, construction, mining, commercial, municipal, and other applications. franklinwater.com GAS ENGINE FBSGF VOLUTE:

More information

SJP Vertical Propeller Pumps

SJP Vertical Propeller Pumps Sulzer Pumps SJP Vertical Propeller Pumps The Heart of Your Process Sulzer Pumps Sulzer Pumps is a world leader in reliable products and innovative pumping solutions. Our advanced research and development,

More information

ITT. Goulds Pumps 5GS, 7GS, 10GS, 13GS, 18GS & 25GS. Engineered for life B5-25GS. Residential Water Systems FEATURES

ITT. Goulds Pumps 5GS, 7GS, 10GS, 13GS, 18GS & 25GS. Engineered for life B5-25GS. Residential Water Systems FEATURES B5-25GS ITT Goulds s 5GS, 7GS, 1GS, 13GS, 18GS & 25GS 5-25, ½ 5, 6 Hz, Submersible s Goulds s is a brand of ITT Corporation. www.goulds.com Engineered for life FEATURES n Powered for Continuous Operation:

More information

FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8

FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8 FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:

More information

Truck Pumps Water XS439 XS869

Truck Pumps Water XS439 XS869 Truck Pumps Water XS439 XS869 Water Truck 9" BOOK: WTP-005 DATE: Jan. 1, 2012 Features: Volute: Heavy cast iron construction. Back pullout design. Can be rotated for ease of installation. Impeller: Double

More information

480 Series Vertical Turbine Pumps

480 Series Vertical Turbine Pumps 480 Series Vertical Turbine Pumps Flows to: 85,000+ GPM Heads to: 2500+ Feet Temperatures to: 400 F Compliance to API 610 Standards Upon Request 140 Years of Pump Manufacturing American-Marsh Pumps, one

More information

D Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006

D Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006 D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation

More information

PRODUCT CATALOG SOLAR PRODUCTS. franklinwater.com

PRODUCT CATALOG SOLAR PRODUCTS. franklinwater.com PRODUCT CATALOG SOLAR PRODUCTS franklinwater.com SOLARPAK SELECTOR Franklin s user-friendly SolarPAK Selector helps you determine the optimal system for your solar project. Simply input your location,

More information

SIL Inline Single Stage Centrifugal Pumps

SIL Inline Single Stage Centrifugal Pumps SIL Inline Single Stage Centrifugal Pumps SIL Inline Pump Range True Reliability Sulzer s new inline pump range (SIL) has been designed to fulfill efficiency regulations across all industries and also

More information

GRUNDFOS GROUNDWATER SERVICE MANUAL 300S. Parts List Submersibles. Contents Parts List Special Tools Standard Tools Part Dimensions

GRUNDFOS GROUNDWATER SERVICE MANUAL 300S. Parts List Submersibles. Contents Parts List Special Tools Standard Tools Part Dimensions GRUNDFOS GROUNDWATER SERVICE MANUAL 300S Parts List 6 8 10 Submersibles Contents Parts List Special Tools Standard Tools Part Dimensions Exploded View 300S 1 13 11c 8a 8b 10 6b 7 13 1 2 1a 3 4 6 13 7 8

More information

Aermotor 4 Submersible Pumps - 5, 8, 12, 16, 20, 22 & 25 GPM

Aermotor 4 Submersible Pumps - 5, 8, 12, 16, 20, 22 & 25 GPM A+ SUPER SUB series stainless steel Precision engineered stainless steel 4 submersible pumps that deliver dependable performance and efficiency in all applications. Heads to 000 feet and capabilities to

More information

33GS, 40GS, 55GS, 60GS, 75GS & 80GS GPM, 1 10 HP, 60 HZ, SUBMERSIBLE PUMPS

33GS, 40GS, 55GS, 60GS, 75GS & 80GS GPM, 1 10 HP, 60 HZ, SUBMERSIBLE PUMPS TECHNICAL BROCHURE B33-8GS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without

More information

Fire Protection. FP-XA End Suction

Fire Protection. FP-XA End Suction Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal

More information

SS7 SUBMERSIBLE ELECTRIC PUMPS 7

SS7 SUBMERSIBLE ELECTRIC PUMPS 7 SS7 TECHNICAL DATA Performance range: flow up to 110 m3/h and max head of 423 m Max. quantity of sand/silt: 50g/m3 Max. ambient temperature: 30 C (50 C available on request) Outlet connection diameter

More information

JOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type. TYPICAL SPECIFICATION MTH Tool Co. Series T41, T51 Pumps

JOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type. TYPICAL SPECIFICATION MTH Tool Co. Series T41, T51 Pumps Peerless Pump Company Indianapolis, IN 46206-7026 JOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type SECTION 1720 Page 1 August 10, 1992 TYPICAL SPECIFICATION MTH Tool Co.

More information

316 Stainless Steel Submersible Pumps 8" 10" 12"

316 Stainless Steel Submersible Pumps 8 10 12 316 Stainless Steel Submersible umps 8" 10" 12" Stainless Steel Submersible umps 40 to 540 m 3 /h The FS Series pumps have been engineered in all AISI 316 stainless steel for efficient and reliable pumping

More information

Submittal Data 3450 RPM 60 Hertz JOB or CUSTOMER:

Submittal Data 3450 RPM 60 Hertz JOB or CUSTOMER: Redi-Flo4 Environmental Submersible Pumps 5E Submittal Data 3450 RPM 60 Hertz JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: APPROVED BY: ORDER NO: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM

More information

GRUNDFOS GROUNDWATER SERVICE MANUAL 230S. Parts List Submersibles. Contents Parts List Special Tools Standard Tools Part Dimensions

GRUNDFOS GROUNDWATER SERVICE MANUAL 230S. Parts List Submersibles. Contents Parts List Special Tools Standard Tools Part Dimensions GRUNDFOS GROUNDWATER SERVICE MANUAL 230S Parts List 6 8 10 Submersibles Contents Parts List Special Tools Standard Tools Part Dimensions Exploded View 230S 1 72 13 11c 8a 8b 10 6b 7 72 13 1 2 1a 3 4 6

More information

NEW! BOOSTER PUMPS. HBP/HBPS series 4" horizontal booster pumps. booster pumps

NEW! BOOSTER PUMPS. HBP/HBPS series 4 horizontal booster pumps. booster pumps HBP/HBPS series 4" horizontal The HBP/HBPS Series Booster Pumps are the most durable available. The patented SignaSeal floating impeller design minimizes thrust loads, allowing for continuous operation

More information

BSM ROTARY GEAR PUMPS

BSM ROTARY GEAR PUMPS FT. MTD. PUMP The Heavy Duty S-Series pumps are designed to handle a wide variety of liquids and are particularly suitable for bulk transfer applications where long life and dependable service is required.

More information

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel

More information

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water. ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L

More information

A-C Fire Pump Systems FP 2.4 Page 1

A-C Fire Pump Systems FP 2.4 Page 1 ENG. DATA Page 1 February, 1996 Supersedes 5/95 issue FP 2.4 Page 2 A-C Fire Pump Systems 49-139 140-206 54-130 131-256 71-150 10WALC 10WALC 11CLC 11CLC 11CHC 500 500 750 Max Working Pressure (G) 175 psi

More information

SJT/SJM CWP Vertical Pump

SJT/SJM CWP Vertical Pump SJT/SJM CWP Vertical Pump Main Applications Non Pull-out Construction SJT/SJM CWP pumps can be used in the following fields: Cooling water pumps in utility and industrial power stations Water supply Irrigation

More information

High Capacity Centrifugal & Sprinkler Pumps

High Capacity Centrifugal & Sprinkler Pumps High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to

More information

SELF-PRIMING PUMPS PRODUCT FAMILY APPLICATIONS FAMILY COMPARISON CHART

SELF-PRIMING PUMPS PRODUCT FAMILY APPLICATIONS FAMILY COMPARISON CHART SLF-PRIMING PUMPS Irrigation and sprinkler pumps are designed for supplying large volumes of water from a lake or pond supply to an irrigation system. They can also be in highvolume applications transferring

More information

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A03 C15 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-3 Model Designation 3-6 Impeller Data 3-8 Material Specifications

More information

Contents Project: Model: Chk d: Date:

Contents Project: Model: Chk d: Date: Contents Model DSHU6. DSHU6.7 DSHU6. DSU6. DSHU6. DSU6.7 DSHU6.7 8DSU6. 8DSHU6. 8DSU6.7 8DSHU6.7 DSU6. DSU67. Section Page Specifications -7, 8 Selection Chart -7., 8. Performance Curves -6 Outline Drawings

More information

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.

More information

PUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications Municipalities Sewage Systems

PUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications Municipalities Sewage Systems Porta-Matic 12V battery-powered portable pump AP5 Air-driven high-pressure pump SludgeMaster Air-driven high-flow pump DEWATERING PUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications

More information

WG / WGS HIGH PRESSURE BOOSTER PUMPS

WG / WGS HIGH PRESSURE BOOSTER PUMPS Date: June 1, 6 Section: 9 Page: 1 Cancel & replace: 03-01-1 WG / WGS HIGH PRESSURE BOOSTER PUMPS This type of pump is ideal for pressure up to 320 P.S.I. (2 kpa) and when boosting is necessary. In addition

More information

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135

More information

Product Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE

Product Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,

More information

G2C and G2S Series Vertical Cantilever and Sump Pumps

G2C and G2S Series Vertical Cantilever and Sump Pumps G2C and G2S Series s Technical Specification Pages This page left intentionally blank. 1.0 Overview. Carver s vertical pump line is designed for moderate to high flow rates. It includes a cantilevered

More information

SUGGESTED SPECIFICATIONS

SUGGESTED SPECIFICATIONS PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year

More information

General Catalog. A New Vision for Quality Pumps. General Catalog

General Catalog. A New Vision for Quality Pumps. General Catalog General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve

More information

franklinwater.com.au 50 Hz VR SERIES Vertical Multi-Stage Pumps 1 thru 10 m 3 h

franklinwater.com.au 50 Hz VR SERIES Vertical Multi-Stage Pumps 1 thru 10 m 3 h franklinwater.com.au 5 Hz VR SERIES Vertical Multi-Stage Pumps 1 thru 1 m 3 h ii 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features... 2 Applications... 2 Counter-Flange Kits... 3 Pump Specifications...

More information

BVM SERIES.

BVM SERIES. BERKELEY BVM SERIES vertical multi-stage pumps www.berkeleypumps.com Berkeley BVM SERIES vertical multi-stage pumps Standing tall in demanding high-pressure and high-temperature applications Berkeley Vertical

More information

DPS. The SSV Dual Pump System

DPS. The SSV Dual Pump System DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve

More information