B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
|
|
- Reynold Barnett
- 6 years ago
- Views:
Transcription
1 Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for -/" Ext. P/N B779 for 3" Ext. 40 A two-piece (split) stainless steel packing gland is available for replacement, P/N B A 80B Case, Volute H0089 Impeller M053 (See Note) See 3 Ring, Packing (Set of ) S40 4 Sleeve, S07 Bearing, Ball S370 7 Gland, Packing (See Note) S04948 Bearing, Ball S4059 Screw, Impeller 3/8-x" S35 40 Slinger, Water S0 Seal, Oil S47 9 Washer, Impeller S034 7 Bracket See 73 O-Ring (See Note) M4943 Capscrew, Hex 3/8-x7/8" (8 Req.) S85 ( Req. 4) 90A 0 (7 Req. 5) 80 Stud, 3/8-x3" ( Req.) S Nut, Hex 3/8- ( Req.) S3343 Washer, Lock S303 80A Plug, Pipe, /4 NPT (4 Req.) 80B Plug, Pipe, / NPT S377 8 Ring, Retaining ( Req.) S Ring, Retaining S45 Fitting, Grease S3700 NOTE: Also accepts gasket S0 as replacement for
2 Victaulic Case, Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B77 4 H0095 M0454-3/8-0T 3" B89 5 H0090 M07-3/8-0T -/" BERKELEY 7 Kit available for this model, P/N B778 for -/" Ext. P/N B779 for 3" Ext. 40 A two-piece (split) stainless steel packing gland is available for replacement, P/N B Case, Volute H04040 Impeller M053 (See Note) See 3 Ring, Packing (Set of ) S40 4 Sleeve, S07 Bearing, Ball S370 7 Gland, Packing (See Note) S04948 Bearing, Ball S4059 Screw, Impeller 3/8-x" S35 40 Slinger, Water S0 Seal, Oil S47 9 Washer, Impeller S034 7 Bracket See 73 O-Ring (See Note) M4943 Capscrew, Hex 3/8-x7/8" (8 Req.) S85 ( Req. 4) (7 Req. 5) 9A 0 80 Stud, 3/8-x3" ( Req.) S Nut, Hex 3/8- ( Req.) S3343 Washer, Lock S Plug, Pipe, /4 NPT (3 Req.) 8 Ring, Retaining ( Req.) S Ring, Retaining S45 Fitting, Grease S3700 NOTE: Also accepts gasket S0 as replacement for
3 Berkeley Flanged Case, Packing Construction Page 80.3 Supersedes 07/0/ 87 8 B/M Mtg. Bracket Spline Ext. B H0095 M0454-3/8-0T 3" B H0090 M07-3/8-0T -/" BERKELEY 7 Kit available for this model, P/N B778 for -/" Ext. P/N B779 for 3" Ext. 40 A two-piece (split) stainless steel packing gland is available for replacement, P/N B Case, Volute H030 Impeller M053 (See Note) See 3 Ring, Packing (Set of ) S40 4 Sleeve, S07 Bearing, Ball S370 7 Gland, Packing (See Note) S04948 Bearing, Ball S4059 Screw, Impeller 3/8-x" S35 40 Slinger, Water S0 Seal, Oil S47 9 Washer, Impeller S034 7 Bracket See 73 O-Ring (See Note) M4943 Capscrew, Hex 3/8-x" (8 Req.) S8 ( Req. 4) 9A 0 (7 Req. 5) 80 Stud, 3/8-x3" ( Req.) S Nut, Hex 3/8- ( Req.) S3343 Washer, Lock S Plug, Pipe, /4 NPT (3 Req.) 8 Ring, Retaining ( Req.) S Ring, Retaining S45 Fitting, Grease S3700 NOTE: Also accepts gasket S0 as replacement for
4 S Victaulic Case, Mechanical Seal Construction Page 80.4 Supersedes 07/0/ 87 8 Mtg. Bracket B/M Spline Ext. B993 5 H04003 M07-3/8-0T -/" 80 BERKELEY B Kit available for this model, P/N B A 9 80 Case, Volute H04040 Impeller M0475 (See Note) See Seal, Retainer M003 4 Sleeve, S07 Bearing, Ball S370 Bearing, Ball S4059 Screw, Impeller 3/8-x" S35 Seal, Oil S47 9 Washer, Impeller S034 7 Bracket See 73A O-Ring (See Note) M B Gasket, Seal Retainer S Seal, Mechanical S390 Capscrew, Hex 3/8-x7/8" (8 Req.) S Capscrew, Hex 3/8-x" (7 Req.) S8 80 Stud, 3/8-x-/4" (4 Req.) S Nut, Hex 3/8- (4 Req.) S303 Washer, Lock S Plug, Pipe, /4 NPT (3 Req.) 8 Ring, Retaining ( Req.) S Ring, Retaining S45 Fitting, Grease S3700 NOTE: Also accepts gasket S0 as replacement for
5 (S) Page 80.5 Supersedes 0/0/04 8A B 40 8B 7 Replacement Kit B A 89 8A 4 80B 3 8B 80A Seal Group 73A 80B 9 Packing Group 5B 9 800C NOTE: Volute appearance will differ depending on pump model. 80B Impeller M09, -/-0T * M /8 ID x -3/4 OD Sleeve M4 Single Row Ball Bearing S3395 Ball Bearing S Key, /4" Sq. x -/4" Lg. S Bearing Cap M Water Slinger S094 Grease Seal ( Req.) M337 9 Lock Washer S039 7 Bracket M33 7 Thrust Ring S09 73A Volute Gasket S0 73B Balance Ring Gasket S /8- x " Lg. Hex Hd Capscrew ( Req.) S8 /-3 X " Lg Hex Hd. Capscrew S3 Lock Washer S3038 8A Grease Fitting ( Req.) S3700 8B External Retaining Ring S30 * Sold only in Repair Kit B B3ZQ Common s Groups Repair s List Packing Components 3 Packing Ring Set 7 Split Packing Gland Set B Lantern Ring S900 5B Packing Housing M334 80B 3/8-NC x -/" Lg Stud ( Req.) S B 3/8- Hex Nut ( Req.) S3343 8B /8 MPT x 90 Grease Fitting S370 See Supplement B. Seal Components B3Z Refer to following page for model specific repair parts listing. 89-3/4" Mechanical Seal S305 5A Mechanical Seal Housing M333 80A /8" NPT Sq. Hd. Pipe Plug S374 8A External Retaining Ring S77
6 (S) Page 80. Supersedes 0/0/04 (S) Series -/ x 0T, 4 & 5 Pump Series Packing Construction S Mechanical Seal Construction Catalog Style Volute Pipe Plugs Replacement Kit Replacement Coupling Clutch B " x 9" B8083 Flanged Suction H030* B8083 3" x 7-/" QTY. 3 B " Flanged Discharge B80833 B8087 8" B " Victaulic H04040* B80835 QTY. 3 Suction B80870 B8083 3" Victaulic /" NPT Discharge H04040* S377 B80837 QTY. B " NPT B80839 Suction H0089* B " NPT QTY. 4 B " Discharge B8084 B8087 8" B8084 4" x 9" B80843 Flanged Suction H030* B " x 7-/" QTY. 3 B " Flanged Discharge B80845 B8087 8" B8084 4" Victaulic H04040* B80847 QTY. 3 Suction B80870 B " Victaulic /" NPT Discharge H04040* S377 B80849 QTY. B " NPT B808 Suction 3" NPT H0089* B8085 QTY. 4 B " Discharge B80853 B8087 8" * NOTE: Also accepts gasket S0 as replacement
B/M No. Shaft Kit available for this model, P/N B Refer to Supplement-C of this section for list of components included with kit.
BJQBM Page 0. Date March 4, 03 Supersedes 0/0/04 8B 3 3C 8 B/M Mtg. Spline B0 H0598 M083 -/-0T 3" B08 H059 M083 -/-0T 3" B08 3 H059 M083 -/-0T 3" B08 4 H0595 M083 -/-0T 3" Kit available for this model,
More informationBerkeley Cast Iron Impeller B6EXQBH SAE ENGINE MOUNT. Flanged Case, Packing Construction. Table I. Page Date March 4, 2013 Supersedes 01/01/04
BEXQBH Page. 8 83 84 ( X scale ) 3 3 5A 8 B/M Mtg. Spline B00 H05398 H053 -/-0T 3" Kit available for this model, P/N B9. Refer to Supplement-C of this section for list of components included with kit.
More informationBerkeley Cast Iron Impeller B1-1/2ZPH ELECTRIC MOTOR DRIVE. Threaded Case (NPT), Packing Construction. Table I. Table II
Cast Iron Impeller B-/ZPH Threaded Case (NPT), Packing Construction Page 50. Date March 4, 03 Supersedes 07/0/ 3 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B53759 5 3 3600 -/4" 7.94" M07666 B596 0 3 3600 -/4"
More informationBearing Frame Mount CAST IRON IMPELLER B4EYRMBM TYPE B SINGLE STAGE CENTRIFUGAL PUMP TABLE I
Page 0. Date November, 009 B4EYRMBM Packing Construction 3 8 B/M No. Rotation Case Diameter B50 CW M5 L09.88 80 A 3 See Supplement B 9 3 See Table I Shaft (Not sold separately) See Note 9 Cover, Suction
More informationBerkeley Cast Iron Impeller B4JPBH ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II
B4JPBH Flanged Case, Packing Construction Page 0. Date March 4, 03 Supersedes 0/0/04 80B 80B 3 See Supplement B 8 4 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B588 0 3 800 -/4" 0.06" L0680 B5883 5 3 800 -/4"
More informationBerkeley Cast Iron Impeller B6ZPL ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II
B6ZPL Flanged Case, Packing Construction Page 350. 80B 80B 3 B509 0 -/4" 6."x8.5" M078 B5 0 3 -/4" 6."x8.5" M078 B548 5 3 -/4" 7.56"x8.56" M079 B54 0 3 -/4" 8.00"x9.00" M04348 7 80A 80A 6 Case, Volute
More informationReplacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationReplacement Parts List FI 1509 & FI 1509C. SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017
Replacement Parts List 304-364 FI 1509 & FI 1509C SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017 FI 1509 FI 1509C FI 1509C REQUIRED BEARING FRAME J BEARING FRAME H BEARING FRAME J 1 1 Impeller
More informationReplacement Parts List FI 4007 & FI 4007D. SUPERSEDES: NEW EFFECTIVE: December 31, 2018
Replacement Parts List 304-572 FI 4007 & FI 4007D SUPERSEDES: NEW EFFECTIVE: December 31, 2018 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE FI 4007 BEARING FRAME J FI 4007D BEARING
More informationCENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationCENTRIFUGAL PUMPS HYDRAULIC DRIVEN 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; double keyed for improved reliability
More informationFI 3009, FI 3009C & FI 3009D
Replacement Parts List 304-486 FI 3009, FI 3009C & FI 3009D SUPERSEDES: June 1, 2013 EFFECTIVE: December 31, 2018 REQUIRED DESCRIPTION FI 3009 FI 3009C FI 3009D BEARING FRAME J BEARING FRAME J BEARING
More informationGENUINE MEGA MEGA WATER PUMPS. 2-1
GENUINE MEGA MEGA WATER PUMPS No pump, no spray. It s that simple. Mega water pumps are not off-the-shelf irrigation pumps designed to run sprinklers; they are the product of over 35 years of experience
More informationCENTRIFUGAL PUMPS WATER TRUCK 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Cast iron enclosed design for high efficiency; double keyed for improved reliability
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES
FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationTruck Pumps Water XS439 XS869
Truck Pumps Water XS439 XS869 Water Truck 9" BOOK: WTP-005 DATE: Jan. 1, 2012 Features: Volute: Heavy cast iron construction. Back pullout design. Can be rotated for ease of installation. Impeller: Double
More informationLB361B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-031 2011/06 LB361B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 793099 Top End Repair Kit 793229 Includes Piston Rings & Expanders, Packing
More informationModel B1-1/2XQBS-11. Model B1-1/2XQBS-18. Model B1-1/2XQBS-26
OWNER S MANUAL Engine Driven High Pressure Pump Model B1-1/2XQBS-11 Model B1-1/2XQBS-18 Model B1-1/2XQBS-26 293 WRIGHT STREET, DELAVAN, WI 53115 WWW.BERKELEYPUMPS.COM PH: 888-237-5353 269 Trillium Drive,
More informationEND SUCTION PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE
TYPE LFE LFE END SUCTION PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE This guide is valid for all Grundfos CBS Inc. products beginning with product code 21. Grundfos CBS Inc. End
More informationINSTALLATION AND OPERATING INSTRUCTIONS REPAIR PARTS LIST
owner's manual Hydraulic-Motor Frame Mounted Centrifugal Pump Direct Coupling Drive INSTALLATION AND OPERATING INSTRUCTIONS REPAIR PARTS LIST 3949 0401 IMPORTANT For best possible performance and continuous,
More informationS200-P Passport Series Fire Pump Service Parts List
Document Number Issue Date 04/08/13 Rev. Date 9/24/18 S200-P Passport Series Fire Pump Service Parts List Index: Component See Pages Body and Impeller 2, 3 Pedestal and Primers 4, 5 Cross Section Views
More informationSeries 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL SERIES 8150 CROSS SECTION 0-952-3 0-952-4 0-952-5 2-904-2 0-952-2 0-952-1 0-952-6 2-001-0 2-916-1 2-904-1 2-123-5 0-905-0
More information900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX
900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # AF-03-326 2015 Pentair Ltd. 01/30/15
More informationPARTS LIST SERIES 5240
File No. 6052.123 Date: January 6, 2003 Supersedes: 6052.123 Date: June 1, 1996 SUMP PUMP FOR PUMPS SERIAL NUMBER 71854 AND LATER NEW DESIGN 5240 SUMP PUMP PARTS IDENTIFICATION ITEM DESCRIPTION PAGE ITEM
More informationHN series. cast iron shallow well jet pumps. 1/2 thru 1 HP
cast iron shallow well jet pumps HN series / thru HP 0 Nozzle Cleanout Port A B 0 Key No. HNC-L HND-L HNE-L No. Part Description Used / HP / HP HP Motor A0CHL A0DHL A0EHL Capscrew /-x-/ Lg. Hex Hd. U0-ZP
More informationCALCULATION OF BOWL HEAD OR DISCHARGE HEAD
February, 1996 Supersedes 5/95 issue CALCULATION OF BOWL HEAD OR Pressure Gauge hd (Discharge Head) hl (LIFT) hp (Internal Pump Loss) Setting Sump Depth Pump O.A.L. Pumping Water Level hb (Bowl Head) For
More informationMarlow Series Prime Line
REPAIR PARTS RPRIMELINE Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS REPAIR PARTS Prime Line M2P M4P Pumps 27 50 49 27 54 1 8 10 6 17 4 67 5 24 37 63 53 51 2 7 46 2 PAGE 2 Prime Line 2" Pump
More informationA-C Fire Pump Systems FP 2.4 Page 1
ENG. DATA Page 1 February, 1996 Supersedes 5/95 issue FP 2.4 Page 2 A-C Fire Pump Systems 49-139 140-206 54-130 131-256 71-150 10WALC 10WALC 11CLC 11CLC 11CHC 500 500 750 Max Working Pressure (G) 175 psi
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationPENTAIR/PUREX A & AH SERIES PUREX L SERIES
PENTAIR/PUREX A & AH SERIES Pumps G- Edited -- 3 A 3 B OBSOLETE OBSOLETE COVER FOR " POT (P0) 00 0-C O-RING FOR COVER (P0) 0 3 00-B03 BASKET (000) 0 0-0 WING NUT WITH STUD (P0) 00 OBSOLETE OBSOLETE VOLUTE
More informationCENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed
More informationEXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
More informationCXV Series Pump Body Service Parts List
Document Number Issue Date 09/29/78 Rev. Date 1/16/18 CXV Series Pump Body Service Parts List C10 Series CXVC10C CXVC10D CXVC10E CXVC10F C20 Series CXVC20B CXVC20C CXVC20D CXVC20E CXVC20F D Series Pump
More informationCOMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit
09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279
More information8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST
8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST 24 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY. DESCRIPTION PART # 1 24 FLAT WASHER, 1/2 ID SAE 6-0248 2 16 LOCKWASHER, 1/2 ID 6-0059 3 17 HEX NUT, 1/2-13UNC 6-0035
More informationLB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing
More information8 PARTS MANUAL 8.1 LIFT ASSEMBLY
8 PARTS MANUAL 8.1 LIFT ASSEMBLY 19 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY DESCRIPTION PART # 1 1 TOWER WELDMENT, POWER SIDE 4-1010 2 2 CARRIAGE WELDMENT 4-1114 3 8 GLIDE BEARING 2-0772 4 4 GREASE NIPPLE
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationS Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA
PACER Pumps 5/91 Page 1 of 5 Item# Part No. Description Qty. 4 58-0721 NUT, BODY, Plated steel, 1/4-20 Hex... 10 58-0721 10 NUT, BODY, Stainless steel, 1/4-20 Hex... 10 6 58-0703 30 Bracket, polyester...
More informationLycoming AIRCRAFT ENGINES. IO-540-AC1A5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC
AIRCRAFT ENGINES IO-540-ACA5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC-5- November 008 Lycoming 5 Oliver Street Williamsport, PA 770 U.S.A. 570/33-8 IO-540-ACA5 PARTS CATALOG This illustrated
More informationSOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR OILWELL HD-1700-PT/HD-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
More informationEBARA Self Priming Trash Pump. Type EFQT-EFQU
Type EFQT-EFQU Contents Section Page Model Designation 2 Features 3 Selection Chart 7 Dimension Drawings 20 Technical Data 24 Sectional View 25 1 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming
More informationThis guide is valid for all Grundfos CBS products beginning with product codes 10, 11 and 20. See back cover for explanation and identification.
END SUCTION PUMPS REPLACEMENT PARTS GUIDE TYPE LC, LF, LCV This guide is valid for all Grundfos CBS products beginning with product codes 10, 11 and 20. See back cover for explanation and identification.
More informationPOWERFORCE PUMP POWERFORCE PUMP POWERFORCE PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY
POWERFORCE PUMP POWERFORCE PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY POWERFORCE Hard Iron Centrifugal Pump Parts Item Description Qty Part Number Reference
More information8 PARTS MANUAL 8.1 LIFT ASSEMBLY
8 PARTS MANUAL 8.1 LIFT ASSEMBLY 19 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY DESCRIPTION PART # 1 1 TOWER WELDMENT, POWER SIDE 4-0767 2 2 CARRIAGE WELDMENT 4-0778 3 8 GLIDE BEARING 2-0772 4 4 GREASE NIPPLE
More informationLoader Backhoe Front Axle Parts 2WD & 4WD
Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationB436, B436E, B436SD WALK-BEHIND TROWEL
BARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: 1-905-364-4200 Toll Free: 1-866-501-1683 Fax: 1-905-364-4201 B436, B436E, B436SD WALK-BEHIND TROWEL Doc. # Orig. Rel. 06/2016
More informationG190 LT-145 (1992) Page 1 of 27 42" Mower Deck
132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119
More informationDesign Characteristics. Aplicaciones
Design Characteristics Single stage centrifugal. Casing axially split. Double entry impeller. Bearings on both sides of impeller. Suction and discharge branches located in lower casing. Características
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationTO REPLACE A MECHANICAL SEAL Select the correct Seal Kit, which contains all gaskets and impeller hardware. Shaft sleeve inspection is suggested.
END SUCTION PUMPS REPLACEMENT PARTS GUIDE TYPE LC, LF, LCV This guide is valid for all Grundfos CBS products beginning with product codes 10, 11 and 20. See back cover for explanation and identification.
More informationMaterials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
More informationPARTS MANUAL FOR MVG 1200 SERIES
PARTS MANUAL FOR MVG 1200 SERIES MARMON-HERRINGTON ALL-WHEEL DRIVE E-mail: info@marmon-herrington.com TABLE OF CONTENTS REPLACEMENT PARTS & WARRANTY CLAIM PROCEDURE......... 3 HOUSING MVG 1200/R...................................
More informationInstruction Sheet IS Date: 8/6/2013
Instruction Sheet Date: 8/6/2013 Bulletin #: Subject: 072709/072710/072711/072811, Belt Keeper Update Kit Purpose: To instruct Lastec personnel Model Numbers: 3300, 3600, 3380, 3680, 4520 Serial Numbers:
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrower. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695994 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrower Not for Reproduction Manual Part No. Revision - Rev. Date: 7/20/2011 Table
More informationINSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL 12K 2 POST S212SX 1-1-R/B/M (SYMMETRICAL) READ THIS INSTRUCTION MANUAL THOROUGHLY BEFORE INSTALLING, OPERATING, SERVICING OR MAINTAINING THE LIFT. SAVE THIS MANUAL. OCT
More informationLEGACY. INSTALLATION and OPERATION MANUAL 1812A. READ and SAVE THIS INSTRUCTION MANUAL 10,000 LB. (ASYMMETRICAL)
INSTALLATION and OPERATION MANUAL LEGACY 1812A 10,000 LB. (ASYMMETRICAL) READ and SAVE THIS INSTRUCTION MANUAL 6500 Millcreek Drive Mississauga, Ontario Canada, L5N-2W6 1-800-268-7959 APR 2004 6-2607 8.2
More informationGENERAL DIMENSIONS OF SMF PUMPS. Capacity upto 7,000 m /hr Head upto 45 m. Range :
Fluid Technology from Holland GENERAL DIMENSIONS OF SMF PUMPS Features : Closed or Semi-open Impeller Different Orientation of Delivery Nozzle. Vertical Execution The SMF series are single-stage centrifugal
More informationPRODUCT INFORMATION BULLETIN
PIB-01 SPECIALTY HAULAGE SOLUTIONS FOR CONSTRUCTION AND MINING COMPARISON OF MEGA WATER PUMP MODELS Applicable to: M-3 (part no. 304954) B-4 (part no. 304755) M-4 (part no. 304991/304992) M-4B (part no.
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationIllustrated Parts List
Illustrated Parts List 3003340 September 2011 Contents How To Use The Illustrated Parts List...3 AIR FILTER REGULATOR...4 AUXILIARY COUNTERSHAFT ASSY....5 AUXILIARY DRIVE GEAR...6 AUXILIARY MAINSHAFT ASSY...7
More informationService Bulletin No. 2874
MODEL TYPE SECTION/GROUP DATE SUBJECT 102 E / E4500 / J4500 Series Coaches Service Information 04--Brakes MERITOR BRAKE CALIPER SERVICE PARTS CHART Dec. 24, 2003 CONDITIONS may be purchased from MCI Service,
More informationHD372C PARTS LIST COMPRESSORS CB-9E /12. Bulletins Needed For Complete Parts List. Gasket Sets and Special Tools
COMPRESSORS CB-9E-092 1995/12 HD372C PARTS LIST Serial # ID# Gasket Sets and Special Tools Gasket Set Buna-N & Iron 793699 PTFE & Iron 793698 FKM & Iron 793697 Neoprene & Iron 793693 Ethylene Propylene
More information136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck
136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 2 of 27 42" Mowing Deck 3 97600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationRL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to
RL-F60 PARTS LIST # 102692I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to For older hoists use the following: Parts List No. 102692H for Serial Number 2640 to 6744 IF YOUR HOIST DOES NOT FALL WITHIN
More informationPARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART Unverferth Manufacturing Co.,
More informationLycoming Aircraft Engines Parts Catalog
Aircraft Engines Parts Catalog IO-0-BG Wide Cylinder Flange Crankcase Model Engine Part No. PC-0- Oliver Street Williamsport, PA 770 Aircraft Engines Parts Catalog IO-0-BG Wide Cylinder Flange Crankcase
More informationGroup 3 Hydraulics 3-1
Group 3 Hydraulics Fig. 3-1, Hydraulic Schematic, AL-10531... 3-2 Main Hydraulic Pump Assembly, LL-299-1262... 3-4 Main control Valve Assembly, LL-3674-181 (4 Section)... 3-6 Spool Control Cover and Seal
More informationMODELS JG43, JG63, JG83 JG44, JG64, JG84
MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT
More information430B SERIES HORIZONTAL SPLIT CASE PUMP
430B SERIES TWO Stage - DIAGONALLY HORIZONTAL SPLIT CASE PUMP REPAIR PARTS INDEX NOTE! Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump.
More informationPACO PUMPS REPLACEMENT PARTS GUIDE. A1b.2 4/06 Supercedes 8/05. Here are some guidelines and suggestions:
END SUCTION REPLACEMENT PARTS GUIDE CAT#: STOCK#: SER#: GPM: TDH: IMP. DIA: While End Suction Pumps are designed and built to provide maximum life while requiring minimum attention and service, replacement
More informationRL-G70 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to
RL-G70 PARTS LIST # 102693I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to For older hoists use the following: Parts List No. 102692H for Serial Number 2485 to 6596 IF YOUR HOIST DOES NOT FALL WITHIN
More informationMODEL NUMBER DESIGNATION 9-0 XX X X
SECTION: G REPLACEMENT PARTS G-1 ORDERING REPLACEMENT PARTS: Your local Prosser distributor can supply parts and repair service. When ordering parts, ALWAYS furnish the following information: Specify pump
More informationTray Box Former. Parts List & Illustrations FIGURE 8-28A RAIL & FINGER ASSEMBLY AUTO LIDDER ~ = VARIABLE PART. W. E. Plemons Machinery Services, Inc.
FIGURE 8-28A RAIL & FINGER ASSEMBLY ITEM PART NO. DESCRIPTION QTY. 1 0032700 BAR, LID HOPPER GUIDE MT (34") 1 ~ 0032701 BAR, LID HOPPER GUIDE MT (42") 1 2 0061300 SUPPORT PAD, LIDDER 1 3 0033800 LEFT RAIL,
More informationB190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly
245-315B190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly 245-315B190 8 H.P. Lawn Vacuum (1995) Page 2 of 22 Chute Assembly Ref # Part Number Qty S/P/F Description 1 681-0068 1 S CHUTE ASSEMBLY
More informationModel Series 660 & 670
Model Series 0 & 0 Part. -0A Harness Assembly. -0 Hex TT-Tap Scr. /-0 x. Lg.. -0 Hex Bolt /-0 x. Lg.. -00 Hex Bolt /- x. Lg.. -0 Speed Nut /-0 Thd.. -00A Flange L-Nut /- Thd.. -00 Hex Nut /-0 Thd.. -0
More information2003 Lycoming. All rights reserved. Lycoming and "Powered by Lycoming" are trademarks or registered trademarks of Lycoming.
O-50-AD5 Engine Parts Catalog Lycoming Part Number: PC-55-3 003 Lycoming. All rights reserved. Lycoming and "Powered by Lycoming" are trademarks or registered trademarks of Lycoming. All brand and product
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationForm No Parts List for: MODEL B HYDRAULIC PUMP GENERAL SECTION PG PG553-2UK FT600 PG554. PG120A Series Y70G Series. Sheet No.
MODEL B HYDRAULIC PUMP GENERAL SECTION Parts List for: Form No. 100520 60208 PG553 65820 PG553-2UK FT600 PG554 FT700-001 PG554-LEAD FT700-002 PG554-2UK PG55A Series Y26G Series PG90A Series Y60G Series
More informationDI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
More informationMODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)
OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70
More informationPB18-G Series Portable Pump Service Parts List
Document Number Issue Date 01/24/07 Rev. Date 7/28/16 PB18-G Series Portable Pump Service Parts List Component Pump Pump Model (Located on Serial Plate) PB18-G2015B PB18-G2015F Exploded View See Page Cross
More informationCL Series Impeller Shaft Assembly Service Parts List
Document Number Issue Date 08/91 Rev. Date 10/17/11 CL Series Impeller Shaft Assembly Service Parts List Index: See Pages Pump Model Component Mechanical Seal Packing Heater Jacket Option Previous Seal
More informationPart s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationCM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
More informationRL-H80 PARTS LIST # H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to
RL-H80 PARTS LIST # 102837H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
More informationTECHNICAL PUBLICATION SUPPLEMENT
TEXTRON Lycoming TECHNICAL PUBLICATION SUPPLEMENT SUPPLEMENT No. ENGINE MODEL PUBLICATION No. PUBLICATION DATE PC-0--B O-90-D Series PC-0- January 9 This supplement is arranged in the same basic format
More informationSan Antonio, TX A Lookout Ridge. Smith Pump Co., Inc. Boerne, TX IH 10 West. Odessa Pumps
I. Hydromatic Pump Parts and Accessories (self-priming pumps) TOTAL A. PARTS-60 RP RDP * 6 ea. 41.33 32.19 1. O-Ring, #241-029-1 TOTAL 247.98 193.14 2 ea. 526.30 409.96 2. Check Valve Assy, #12612-061-5
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
More informationCompressor MODEL 05G $3.00
Compressor MODEL 0G -0 $.00 Service Parts List MODEL 0G COMPRESSOR CONTENTS INTRODUCTION... I ORDERING INSTRUCTIONS... I GENERAL NOTES... i. TOOLS / OILS / FITTINGS.... CRANKCASE AND SUCTION SERVICE VALVE....
More information