SUBMERSIBLE TURBINE PUMPS
|
|
- Sherman Hubbard
- 5 years ago
- Views:
Transcription
1 FEATURES 1% factory wet tested with test results shipped with each pump Hydraulic optimization for exceptional abrasive handling Ductile iron motor bracket and discharge for extended pump life Premium glass-lined bowls for maximum efficiency and abrasion resistance Investment cast 34 stainless steel impellers for superior performance Custom configurations available SPECIFICATIONS 11" minimum well I.D. 25 minimum submergence above inlet " NPT discharge 5 psi standard maximum working pressure at 15 MODEL NO. EXPLANATION Example: STS25D9C-1 = GPM STS = Sub Turbine Series 25 = Motor HP D = Ductile Iron 9 = 9 Pump C = Impeller Trim Configuration 1 = Number of Stages = Motor Bracket = Discharge
2 PERFORMANCE 4 1 HP 8% 35 7% 3 % 25 5% FEET 2 HP 5 HP 4% EFFICIENCY 15 3% 1 2% 5 1% % USGPM 2 RECOMMENDED OPERATING RANGE NOTE: Performance based on 8 F fresh water; " motor at 345 rpm; 8" motor at 352 rpm
3 PERFORMANCE 8 2 HP 8% HP 7% 15 HP % HP 5% FEET 4 4% EFFICIENCY 3 3% 2 2% 1 1% USGPM % RECOMMENDED OPERATING RANGE NOTE: Performance based on 8 F fresh water; " motor at 345 rpm; 8" motor at 352 rpm 3
4 DIMENSIONS SINGLE-STAGE METERS FEET TRIM A TRIM B TRIM C 77% 79% 78% 8% 81% 83% 82% 8% 79% HP 7 5 TRIM A TRIM B TRIM C USGPM kw LPM M 3 /HR 4
5 ORDERING INFORMATION HP Stages Trim Size Motor Size Discharge (NPT) Order No. Model No. Shipping Wt. (lbs) 5 1 1B " STS5D9B B 8" STS5D9B A " STSD9A A 8" STSD9A A 1C 8" " NPT STS1D9X C 8" STS125D9C A 1B 1C 8" STS15D9X B 3C 8" STS175D9X A 3B 8" STS2D9X DIMENSIONS HP Stages Trim Motor Size P M* MD* Motor Wt. Pump Wt. in in in lbs lbs 5 1 1B " B 8" A " A 8" A 1C 8" C 8" A 1B 1C 8" B 3C 8" A 3B 8" NOTE: *MD diameter = Franklin Electric Motor, M = Maximum Length of Franklin Electric Motor P M " DIMENSIONS IMPELLER Trim Diameter (in) C Angle A 7.47 B C.14 A C MD 5
6 REPAIR PARTS Item No. Part Description Part No. 1,2 Upthrust Bolt/Nut Kit Discharge " NPT (no top bearing) Discharge dual /8" NPT (no top bearing) Top Bearing, Bronze (included in 5) Top Bowl w/bronze Top Bearing Bowl Bolt Kit (12 pieces) Bowl Bolt Kit (1 pieces) " Bowl Bearing, Bronze (included in 8) " Bowl Bearing, Rubber (included in 8) " Bowl Bearing, FKM (included in 8) Bowl and Bearing Assembly, Bronze Bowl and Bearing Assembly, Rubber Bowl and Bearing Assembly, FKM Bowl Only (no bearing installed) Taper Lock Collet Kit (Included in 1) Sand Cap w/set Screws Motor Bracket Bearing, Bronze (included in 14) " Motor Bracket w/bronze Bearing " Motor Bracket w/bronze Bearing Suction Screen w/screws for " Motor Bracket Suction Screen w/screws for 8" Motor Bracket Cable Guard Screw Kit ( pieces) Cable Guard Clamp " Motor Coupling " Motor Coupling " Motor bolt Kit " Motor Bolt Kit Nameplate w/drive Screws Owner's Manual , REPAIR PARTS IMPELLER Item No. Trim Diameter (in) C Angle Kit w/collets A B C NOTE: Shaft and cable guard information located on the following pages
7 REPAIR PARTS 9" Shafts Item No. Stages Motor Size Length in mm Part No Cut-To-Length Cut-To-Length Cut-To-Length Cut-To-Length Item No " Cable Guards Stages Length in mm Part No. Step-Down Cable Guard for " Motor Step-Down Cable Guard for 8" Motor ' Cut-To-Length , MATERIALS Part Name Common Material Name Material Specification No. Discharge Bracket Ductile Iron ASTM A Top Bowl Ductile Iron ASTM A Intermediate Bowl Cast Iron ASTM A49 C1 3B Bearings, Discharge and Suction Bronze ASTM 8584 C89835 Impeller 34 Stainless Steel ASTM A743/A743M CF8 Pump Shaft 41 Stainless Steel ASTM A582 S41 Suction Bracket Ductile Iron ASTM A Bowl Bearing Rubber Rubber Sand Collar 3 Stainless Steel ASTM A Suction Screen 32 Stainless Steel ASTM A24 S32 Cable Guard 3 Stainless Steel ASTM A Shaft Coupling 41 Stainless Steel ASTM A582 S41 Upthrust Bolt 3 Stainless Steel ASTM A Taper Lock 41 Stainless Steel ASTM A582 S41 Bolting 3 Stainless Steel ASTM A Note: Bowl bearing and shaft options available; contact customer service for available options 7
8 Franklin Electric 9255 Coverdale Road Fort Wayne, Indiana 489 franklinwater.com Mi
SUBMERSIBLE TURBINE PUMPS
" STS SERIES - GPM FEATURES % factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for abrasive
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 100% factory wet tested with test results shipped with each pump Premium ductile iron casting for long life and high pressures Longer discharge and motor bracket bearings for increased pump life
More informationSUBMERSIBLE TURBINE PUMPS
FEATURES 1% Franklin Electric factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationfranklinwater.com 50 Hz 6" STS SERIES Submersible Turbine Pumps
franklinwater.com 5 Hz 6" STS SERIES Submersible Turbine Pumps 2 FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump
More information8" Submersible Turbine Pump 450 GPM
8" Submersible Turbine Pump 450 GPM Submersible Turbine Pumps Features Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life
More informationBerkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationCENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES
FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More information50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells
FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,
More informationSUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES
FEATURES Stainless steel impellers and diffusers to resist corrosion Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than
More informationSUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES SPECIFICATIONS APPLICATIONS
FEATURES n Stainless steel impellers and diffusers to resist corrosion n Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures
More informationCENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed
More informationSubmersible Turbine Pumps
Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationSUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T
SUBMERSIBLE PUMPS FW85 47 Supersedes 25 FOR 6 through 8 WELLS Series 6P, 6T and 8T High capacity 5, 6 or 7 submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized
More informationSix-Inch Submersible Pumps
FW1 87 5 thru 5 5 to GPM Supersedes Six-Inch Submersible Pumps Series 6P and 6T High capacity six-inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More informationCENTRIFUGAL PUMPS HYDRAULIC DRIVEN 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; double keyed for improved reliability
More informationfranklinwater.com 50 Hz 4 SUBMERSIBLE PUMPS
franklinwater.com 50 Hz 4 SUBMERSIBLE PUMPS 01 4 SUBMERSIBLE PUMPS 4400 Tri-Seal Pumps 3 18 LPM Tri-Seal 5 25 LPM Tri-Seal 7 30 LPM Tri-Seal 9 45 LPM Tri-Seal 11 60 LPM Tri-Seal 13 70 LPM Tri-Seal 15 4400
More informationCENTRIFUGAL PUMPS WATER TRUCK 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Cast iron enclosed design for high efficiency; double keyed for improved reliability
More informationPRODUCT CATALOG SUBMERSIBLE PUMPS RESIDENTIAL & LIGHT COMMERCIAL. franklinwater.com
PRODUCT CATALOG SUBMERSIBLE PUMPS RESIDENTIAL & LIGHT COMMERCIAL franklinwater.com SUBMERSIBLE PUMPS Model Number Nomenclature...2 4" 32 Series Pumps...4 Ordering Information...5 5 gpm...6 7 gpm...8 1
More informationPRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: B C D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.
YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION PUMP MODELS 4310-1C A B C D E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD
More informationPRODUCT CATALOG SOLAR PRODUCTS. franklinwater.com
PRODUCT CATALOG SOLAR PRODUCTS franklinwater.com SOLARPAK SELECTOR Franklin s user-friendly SolarPAK Selector helps you determine the optimal system for your solar project. Simply input your location,
More informationV6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
More informationTable of Contents. 4 Submersible Pumps
5 Hz 4 Submersible Pumps Table of Contents 4 Submersible Pumps 44 Tri-Seal Pumps... 2 18 LPM Tri-Seal... 5 25 LPM Tri-Seal... 7 3 LPM Tri-Seal... 9 45 LPM Tri-Seal... 11 6 LPM Tri-Seal... 13 7 LPM Tri-Seal...
More informationAermotor 4 SUBMERSIBLE PUMPS 35, 50, 75, 90 GPM A+ SUPER SUB Series stainless steel
A+ SUPER SUB Series stainless steel The A+ Super Sub Series Stainless Steel 4 Submersible Pumps deliver efficient and dependable performance even in rough, aggressive water. Heads to 640 feet and capabilities
More informationWater Systems Price List
Water Systems Price List APRIL 2012 REV 4, JAN 2014 Pumps Motors Drives Controls Horizontal Multistage Pumps Accessories to suit MH pumps Code: MHAcc Description ORDER No. Price Pressure Switch Telemecanique
More informationSelection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
More informationREDUCED DIAMETER SUBMERSIBLE PUMPS
3200 SERIES REDUCED DIAMETER SUBMERSIBLE PUMPS The 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationFlow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS " CCW " CCW
6 Hz LS EXTENSION 4" Submersible Pumps MODEL LS 5LS, 7LS, LS, LS, 8LS, 25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor
More informationCENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS
FEATURES Volute: Ductile iron rugged construction. Self-priming with priming and drain plugs. Removable front cover features a built-in check valve to facilitate priming Impeller: Cast iron semi-open,
More informationISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
More informationCALCULATION OF BOWL HEAD OR DISCHARGE HEAD
February, 1996 Supersedes 5/95 issue CALCULATION OF BOWL HEAD OR Pressure Gauge hd (Discharge Head) hl (LIFT) hp (Internal Pump Loss) Setting Sump Depth Pump O.A.L. Pumping Water Level hb (Bowl Head) For
More informationTruck Pumps Water XS439 XS869
Truck Pumps Water XS439 XS869 Water Truck 9" BOOK: WTP-005 DATE: Jan. 1, 2012 Features: Volute: Heavy cast iron construction. Back pullout design. Can be rotated for ease of installation. Impeller: Double
More informationPROGRESSIVE CAVITY ELECTRIC SUBMERSIBLE PUMP SYSTEM ARTIFICIAL LIFT SYSTEMS. franklin-energy.com
ARTIFICIAL LIFT SYSTEMS PROGRESSIVE CAVITY ELECTRIC SUBMERSIBLE PUMP SYSTEM Designed specifically for coalbed methane and shale gas applications, Franklin s progressive cavity pump and CBM+ motor are designed
More information1100 Series Multi-Stage Vertical Turbine Pumps
1100 Series Multi-Stage Vertical Turbine Pumps Capacities to 40,000 GPM Heads to 1,500 Feet Temperatures to 200 F Water Lubricated Open Lineshaft Vertical Hollow Shaft Motor The vertical hollow shaft motor
More informationBOOSTER PUMPS PRODUCT FAMILY APPLICATIONS FAMILY COMPARISON CHART
BOOSTER PUMPS Franklin s booster pumps feature a stainless steel construction and are designed to meet any pressure-boosting need. The selection is available in a range of horsepower sizes, in single-
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationPRODUCT INFORMATION YEOMANS SERIES 6150 COMPLETE 6150 PUMP INCLUDES: D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C.
YEOMANS SERIES 6150 HORIZONTAL-COUPLED PRODUCT INFORMATION A B D C E COMPLETE 6150 PUMP INCLUDES: A. MOTOR D. HORIZONTAL PUMP WITH FEET B. COUPLING E. COMMON BASE C. COUPLING GUARD ISSUE 12/05 PAGE 6707
More informationEnvironmental Submersible Pumps
Environmental Submersible Pumps Grundfos 475S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
More information5LS, 7LS, 10LS, 13LS, 18LS & 25LS 5-25 GPM, ½ 1½ HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More informationD Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006
D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation
More informationEnvironmental Submersible Pumps
Environmental Submersible Pumps Grundfos 385S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
More informationA-C Fire Pump Systems FP 2.4 Page 1
ENG. DATA Page 1 February, 1996 Supersedes 5/95 issue FP 2.4 Page 2 A-C Fire Pump Systems 49-139 140-206 54-130 131-256 71-150 10WALC 10WALC 11CLC 11CLC 11CHC 500 500 750 Max Working Pressure (G) 175 psi
More informationWG / WGS HIGH PRESSURE BOOSTER PUMPS
Date: June 1, 6 Section: 9 Page: 1 Cancel & replace: 03-01-1 WG / WGS HIGH PRESSURE BOOSTER PUMPS This type of pump is ideal for pressure up to 320 P.S.I. (2 kpa) and when boosting is necessary. In addition
More informationITT. Engineered for Life. GS Subs, New Guardian System and You, Stronger Together!
GS Subs, New Guardian System and You, Stronger Together! GS Submersibles have always had a reputation for being reliable and tough pumps. Now the best is even better! The new Guardian System now makes
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationF-Series Fire Fighting Pumps
F-Series Fire Fighting Pumps VISION To be a leading local manufacturer and reliable partner providing engineered products and solutions to our customers. MISSION Supporting the socio-economic development
More informationTECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 10SB & 18SB 5-18 GPM, ½ 1½ HP, 60 HZ SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 1SB & 18SB 5-18, ½ 1½ HP, 6 HZ SUBMERSIBLE PUMPS FEATURES Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand
More information100H, 150H, 225H, 275H
TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the
More informationFAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934
FAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934 Section 932 Page 393 Supersedes Section 932 Page 393 Dated April 6 2.5 GPM 45 104 FJP-104-2.5 X900101 50 115.5 FJP-115.5-2.5 X900102 55 127
More informationAermotor 4 Submersible Pumps - 5, 8, 12, 16, 20, 22 & 25 GPM
A+ SUPER SUB series stainless steel Precision engineered stainless steel 4 submersible pumps that deliver dependable performance and efficiency in all applications. Heads to 000 feet and capabilities to
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More informationELECTRIC SUBMERSIBLE. ESP Pumping Systems. franklin-energy.com
ELECTRIC SUBMERSIBLE ESP Pumping Systems franklin-energy.com ESP Pumping Systems Franklin Electric s submersible pumps feature proven hydraulic components. Designed for marginal oil and gas wells, our
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationITT GS-CBM. Goulds Pumps. Engineered for life B5-75GSX. Residential Water Systems. GS Xtreme 60 Hz 4" Submersible Pumps FEATURES
B5-75GSX ITT Residential Water Systems Goulds Pumps GS-CBM Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life GS Xtreme 6 Hz 4" Submersible Pumps FEATURES n Field Proven Design:
More informationD/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
More informationMA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
More informationKW Submersible, Single-Vane Impeller
Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95
More informationSubmittal Data 3450 RPM 60 Hertz JOB or CUSTOMER:
Redi-Flo4 Environmental Submersible Pumps 5E Submittal Data 3450 RPM 60 Hertz JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: APPROVED BY: ORDER NO: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM
More informationA-C Fire Pump. Fitting and Accessories A-C 100A
A-C Fire Pump Fitting and Accessories A-C 100A A-C Fire Pump Fitting and Accessories Table of Content Page Automatic Air Release Valve... 1 Suction And Discharge Gauge Assembly... 2 Casing Relief Valve...
More informationTECHNICAL BROCHURE B5-75GSX. GS-CBM GS Xtreme 60 HZ, 4" SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-75GSX GS-CBM GS Xtreme 6 HZ, 4" SUBMERSIBLE PUMPS FEATURES Field Proven Design: The GS Xtreme features super strong construction due to the welded casing joints at both ends. The
More informationSubmersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
More informationPUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications Municipalities Sewage Systems
Porta-Matic 12V battery-powered portable pump AP5 Air-driven high-pressure pump SludgeMaster Air-driven high-flow pump DEWATERING PUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications
More information60 HZ SSI SERIES Submersible Stainless Steel Pumps 6", 8", 10" QUOTE WITH. franklinwater.com
6 HZ SSI SERIES Submersible Stainless Steel Pumps 6", 8", 1" QUOTE WITH franklinwater.com 6 HZ SSI SERIES SUBMERSIBLE PUMPS Overview...2 Features...2 Applications...2 Specifications...2 Model No. Explanation...2
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationSP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
More informationSIL Inline Single Stage Centrifugal Pumps
SIL Inline Single Stage Centrifugal Pumps SIL Inline Pump Range True Reliability Sulzer s new inline pump range (SIL) has been designed to fulfill efficiency regulations across all industries and also
More information4 WT SERIES SUBMERSIBLE
4 WT SERIES SUBMERSIBLE Webtrol s 4 WT Series Webtrol s WT Series pumps offer superior performance and exceptional resistance to abrasives, due to the floating stack design. An excellent choice for residential
More information5GS, 7GS, 10GS, 13GS, 18GS & 25GS 5-25 GPM, ½ 5 HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-25GS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More informationITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6" Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity
Goulds Pumps 7L, 9L, 15L, 2L, 3L Stainless Steel 6" Submersible Pumps 6 Hz High Capacity For 6" and larger wells Goulds Pumps is a brand of ITT Residential and Commercial Water. www.goulds.com Engineered
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationNEW! BOOSTER PUMPS. HBP/HBPS series 4" horizontal booster pumps. booster pumps
HBP/HBPS series 4" horizontal The HBP/HBPS Series Booster Pumps are the most durable available. The patented SignaSeal floating impeller design minimizes thrust loads, allowing for continuous operation
More information480 Series Vertical Turbine Pumps
480 Series Vertical Turbine Pumps Flows to: 85,000+ GPM Heads to: 2500+ Feet Temperatures to: 400 F Compliance to API 610 Standards Upon Request 140 Years of Pump Manufacturing American-Marsh Pumps, one
More informationApplication & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump
Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationITT. Goulds Pumps 45J and 70J. Engineered for life B45-70J. Residential Water Systems. Features. 60 Hz High Capacity Flat Bowl 6" Submersible Pumps
B45-7J Goulds Pumps 45J and 7J Hz High Capacity Flat Bowl 6" Submersible Pumps For 6" and larger wells Goulds Pumps is a brand of Corporation. www.goulds.com Engineered for life Features n Powered for
More informationJOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type. TYPICAL SPECIFICATION MTH Tool Co. Series T41, T51 Pumps
Peerless Pump Company Indianapolis, IN 46206-7026 JOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type SECTION 1720 Page 1 August 10, 1992 TYPICAL SPECIFICATION MTH Tool Co.
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationSelection Chart. SC Series 6 inch (150mm) Submersible Borehole Pumps PERFORMANCE DATA SC65 SC50 SC30 SC18 TOTAL HEAD FEET Q (LITRES PER MINUTE)
PERFORMANCE DATA Selection Chart TOTAL HEAD FEET 450 400 350 300 250 200 150 100 50 0 GALLONS PER MINUTE 0 50 100 150 200 250 300 SC18 SC30 SC50 SC65 0 200 400 600 800 1000 1200 1400 Q (LITRES PER MINUTE)
More information316 Stainless Steel Submersible Pumps 8" 10" 12"
316 Stainless Steel Submersible umps 8" 10" 12" Stainless Steel Submersible umps 40 to 540 m 3 /h The FS Series pumps have been engineered in all AISI 316 stainless steel for efficient and reliable pumping
More informationFire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
More informationITT. Goulds Pumps 5GS, 7GS, 10GS, 13GS, 18GS & 25GS. Engineered for life B5-25GS. Residential Water Systems FEATURES
B5-25GS ITT Goulds s 5GS, 7GS, 1GS, 13GS, 18GS & 25GS 5-25, ½ 5, 6 Hz, Submersible s Goulds s is a brand of ITT Corporation. www.goulds.com Engineered for life FEATURES n Powered for Continuous Operation:
More informationLUBE OIL PUMPS. Critical Lubrication Service for: Bearings Seals Gearboxes. on... Gas & Steam Turbines Compressors Engines Starting Packages
LUBE OIL PUMPS Critical Lubrication Service for: Bearings Seals Gearboxes on... Gas & Steam Turbines Compressors Engines Starting Packages LEADING SUPPLIER OF LUBE OIL PUMPS TO THE POWER GENERATION INDUSTRY
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More information4WN. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE MULTISTAGE PUMPS. Pag
CONTENTS Pag - SPECIFICATIONS 200 PUMP SPECIFICATION 200 MOTOR SPECIFICATION 201 SECELTION CHART 202-203 TYPE KEY AND CURVES SPECIFICATIONS 204-205 PERFORMANCE CURVE 1 206 PERFORMANCE CURVE 2 207 PERFORMANCE
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationMA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
More informationContents Project: Model: Chk d: Date:
Contents Model DSHU6. DSHU6.7 DSHU6. DSU6. DSHU6. DSU6.7 DSHU6.7 8DSU6. 8DSHU6. 8DSU6.7 8DSHU6.7 DSU6. DSU67. Section Page Specifications -7, 8 Selection Chart -7., 8. Performance Curves -6 Outline Drawings
More information4" SUBMERSIBLE PUMP 4" SUBMERSIBLE PUMP. "GS" series. "ST" series. "SL" series. ST Series (stainless steel) SL Series (thermoplastic)
4" SUBMERSIBLE PUMP 4" SUBMERSIBLE PUMP ST / GS SERIES (stainless steel) SL SERIES (thermoplastic) The "ST / GS / SL" series are built with such precision that they provide a superior output for many years.
More information480 Series Vertical Turbine Pumps
480 Series Vertical Turbine Pumps Flows to: 300,000 GPM Heads to: 1400+ Feet Temperatures to: 400 F Compliance to API 610 Standards Upon Request 130 Years of Pump Manufacturing American-Marsh Pumps, one
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP The Heavy Duty S-Series pumps are designed to handle a wide variety of liquids and are particularly suitable for bulk transfer applications where long life and dependable service is required.
More information