EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:"

Transcription

1 Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation Skid Packages 25 Dimension Drawings Skid Packages 26 Technical Data 35 Sectional View (803) (p) (803) (f) rev. 04/15

2 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming trash pump HYDRAULiCS T Standard U High Head COnnECTiOn SiZE Suction x Discharge 2" (50mm) 2" (50mm) 3" (80mm) 3" (80mm) 4" (100mm) 4" (100mm) 6" (150mm) 6" (150mm) 8" (200mm) 8" (200mm) 10" (250mm) 10" (250mm) 12" (300mm) 12" (300mm) MATERiALS OF COnSTRUCTiOn A Standard: Ductile iron impeller / Cast iron body 2 (803) (p) (803) (f) rev. 12/11

3 Features - EFQT Impellers are designed as a 2-vane, semi-open, solids handling up to 3" diameter solids, based on the pump size. Backside pump-out vanes reduce pressure on the seal and exclude solids from the seal area. Cartridge seal design allows for quick replacement and ease of installation. Removeable cover plates and rotating elements for quick inspection and cleaning of the pump without having to remove it from the piping. 3 (803) (p) (803) (f) rev. 12/11

4 Features - EFQU Impellers are designed as a Multivane, semi-open, high efficiency, solids handling up to 1.25" diameter solids. Backside pump-out vanes reduce pressure on the seal and exclude solids from the seal area. Cartridge seal design allows for quick replacement and ease of installation. Removeable cover plates and rotating elements for quick inspection and cleaning of the pump without having to remove it from the piping. EFQU-Series Pumps are dimensionally interchangeable with the EFQT series Pumps in the 3", 4" & 6" sizes. 4 (803) (p) (803) (f) rev. 12/11

5 Standard Specifications EFQT EFQU Discharge Size/Connection 2 to 12 inch 3 to 6 inch Flanged, 125# R.F. ANSI Flanged, 125# R.F. ANSI Range of HP 1 HP to 125 HP 1.5 HP to 75HP Range of Performance Capacity: to 3400 GPM 1500 GPM Head: to 130 feet to 210 feet Maximum Solid Diameter 3 inch 1.25 inch Speed 650 to 2150 RPM Standard Materials Casing Cast Iron A48 CL 30 Impeller Ductile iron A Wear Plate Carbon Steel SAE 1020 Cover Plate Cast Iron A48 CL 30 Shaft Alloy Steel 4140 Bearing Housing Cast Iron A48 CL 30 Flap Valve Reinforced Neoprene Seal Sleeve 316 Stainless Steel Flanges Cast Iron A48 CL 30 O-rings Buna Mechanical Seal Tungsten Carbide/Tungsten Carbide, Viton, 316 Stainless Steel Options Base-plate mounting, coupling guards Horizontal V -belt Vertical V- belt Flex coupled TEFC or OPD motors Diesel Engine operation, trailer or skid mounted NPT Threaded suction and discharge connections *Note: Alternate construction materials avialable on request including 304ss, 316ss and CD4 MCU 5 (803) (p) (803) (f) rev. 04/15

6 Specifications - EFQ 1. General: The pump(s) provided by Ebara are designed to provide maximum up time and ease of maintenance. They shall be horizontal, radial split, single stage, single suction and of a self priming design. The rotating element will be of back pullout design which can be removed without disturbing the flanged piping connections. The suction flange (front of casing) and discharge flange (top of casing) shall have a minimum rating of 125#. a. CASING: The pump casing will be a material minimum of Grade A48, Cl 30 Cast Iron. Mounting feet will be integrally cast and sized to prevent tipping. Castings shall be smooth surfaces and free of blow holes and other casting irregularities. The casing cover plate (top) used for filling will be 3 ½" in diameter and will be opened with a threaded hand clamp bar assembly. Casing drain plug will be a minimum of 1-1/4" NPT for complete and rapid draining. The front cover plate must be of sufficient size to permit removal of stoppages and allow service to the impeller, wear plate, and check valve without removing the suction or discharge piping. The cover plate is fitted with a handle for ease of maintenance. A pressure relief valve will be mounted on the front cover plate and designed to open at psi. The suction and discharge spool flanges shall be of one piece design and each fitted with a 1/4" NPT tapped holes with pipe plugs suitable for mounting gages and other equipment as desired. The bearing housing will contain a fill plug and a sight gage for ease of monitoring oil level. An integral suction check valve shall be provided, made of reinforced neoprene. The function of the check valve is to prevent reprime after every cycle, thereby, saving energy. b. IMPELLER: The impeller shall be Ductile Iron A , single suction type, semi-open, non-clog type and threaded to the shaft and positively locked in position. The impeller shall be dynamically balanced and clearance shall be adjusted externally without use of shims or the dismantling of the pump. External clearance adjustment optimizes pump efficiency while extending the life of the impeller and the wear plate. Adjustment can be made with an Allen wrench (or equivalent). The impeller will be positively driven through a key mounted on the shaft. The Model EFQT impeller is designed to handle solids up to 3" and the Model EFQU up to 1.25". c. SHAFT: The heavy duty shaft is made of Alloy Steel 4140 and designed such that the minimum shaft deflection does not exceed.002 at the stuffing box. d. SLEEVES: The shaft sleeves shall be of high quality Stainless steel material and sealed with o-ring to prevent leakage between the shaft and sleeve. e. BEARINGS: Inboard and outboard bearings shall be anti-friction ball type, single or double row depending on pump model. Bearings shall be deep groove arranged for radial and / or axial loads as required by model configuration. Both sets of bearings shall be lubricated from a common reservoir. f. MECHANICAL SEALS: Shaft seal faces shall be oil lubricated and the face material shall be TC/TC. The cage and spring shall be made of stainless steel and the elastomers shall be Viton. g. BASE: Pump and motor/drive assembly shall be mounted on a common fabricated steel baseplate. 6 (803) (p) (803) (f) rev. 04/15

7 Selection Chart - EFQT Model EFQT Selection chart TDH m ft EFQT2 EFQT3 EFQT4 EFQT6 EFQT8 EFQT USGPM m 3 /hr EFQT12 - Please consult Factory 7 (803) (p) (803) (f) rev. 04/15

8 Selection Chart - EFQU Model EFQU Selection chart TDH m ft EFQU3 EFQU4 EFQU USGPM m 3 /hr 8 (803) (p) (803) (f) rev. 12/11

9 Suction Speed Flow Curve 9 (803) (p) (803) (f) rev. 12/11

10 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQT2 impeller Diameter: 6.38" S.G.: 1.0 Data Sheet Net Weight: 203 lbs. (92kg) Shipping Weight: 252 lbs. (114kg) Impeller Dia.: 6-1/4" (158.75mm) R.P.M.: From 1150 RPM to 2900 RPM Max. Solids: 1-3/4" (44.45mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 1.75" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 02/13

11 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQT3 impeller Diameter: 8.75" S.G.: 1.0 Data Sheet Net Weight: 404 lbs. (183kg) Shipping Weight: 452 lbs. (205kg) Impeller Dia.: 8-3/4" (222.3mm) R.P.M.: From 650 RPM to 2150 RPM Max. Solids: 2-1/2" (63.5mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 2.5" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 02/13

12 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQT4 impeller Diameter: 9.75" S.G.: 1.0 Data Sheet Net Weight: 600 lbs. (295.5kg) Shipping Weight: 655 lbs. (280kg) Impeller Dia.: 9-3/4" (247.65mm) R.P.M.: From 650 RPM to 1950 RPM Max. Solids: 3" (76.2mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 3.0" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 12/11

13 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQT6 impeller Diameter: " S.G.: 1.0 Data Sheet Net Weight: 802 lbs. (364kg) Shipping Weight: 862 lbs. (391kg) Impeller Dia.: 12-3/8" (314.32mm) R.P.M.: From 650 RPM to 1550 RPM Max. Solids: 3" (76.2mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 3.0" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 12/11

14 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQT8 impeller Diameter: 14.75" S.G.: 1.0 Data Sheet Net Weight: 1129 lbs. (581kg) Shipping Weight: 1399 lbs. (634kg) Impeller Dia.: 14-3/4" (374.65mm) R.P.M.: From 650 RPM to 1350 RPM Max. Solids: 3" (76.2mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 3.0" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 02/13

15 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQT10 impeller Diameter: 14.75" S.G.: 1.0 Data Sheet Net Weight: 1400 lbs. (635kg) Shipping Weight: 1461 lbs. (663kg) Impeller Dia.: 14-3/4" (374.65mm) R.P.M.: From 650 RPM to 1450 RPM Max. Solids: 3" (76.2mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 3.0" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 12/11

16 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQT (803) (p) (803) (f) rev. 01/16

17 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQU3 impeller Diameter: 11" S.G.: 1 Data Sheet Net Weight: 472 lbs. (214 kg) Shipping Weight: 497 lbs. (225 kg) Impeller Dia.: 11" (279.4mm) R.P.M.: From 850 RPM to 2150 RPM Max. Solids: 13/16" (20.63mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 13/16" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 12/11

18 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQU4 impeller Diameter: 11" S.G.: 1 Data Sheet Net Weight: 600 lbs. (272 kg) Shipping Weight: 655 lbs. (297 kg) Impeller Dia.: 11" (279.4mm) R.P.M.: From 850 RPM to 2150 RPM Max. Solids: 1 1/8" (28.57mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 1.12" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 12/11

19 Performance Curves Project: GPM: TDH: EFF: HP: Chk d: Date: EFQU6 impeller Diameter: 12.5" S.G.: 1 Data Sheet Net Weight: 910 lbs. (413 kg) Shipping Weight: 965 lbs. (437 kg) Impeller Dia.: 12 1/2" (317.5mm) R.P.M.: From 850 RPM to 1950 RPM Max. Solids: 1 1/4" (31.75mm) Repriming Lifts Figure NPSH prior to using above chart. DO NOT use as NPSH Suction Lift. 1.25" Dia. Max. Spherical Solids (803) (p) (803) (f) rev. 12/11

20 Dimensions Model EFQT 2, 3, 4, 6 Ø Ø Ø Ø 20 (803) (p) (803) (f) rev. 04/15

21 Dimensions Model EFQT 8 Ø Ø Ø Ø 21 (803) (p) (803) (f) rev. 04/15

22 Dimensions Model EFQT10 Ø Ø Ø Ø 22 (803) (p) (803) (f) rev. 04/15

23 Dimensions Model EFQT12 Please Consult Factory Ø Ø Ø Ø 23 (803) (p) (803) (f) rev. 04/15

24 Dimensions Model EFQU 3, 4, 6 Ø Ø Ø Ø 24 (803) (p) (803) (f) rev. 04/15

25 Model Designation Skid Packages 25 (803) (p) (803) (f) rev. 04/15

26 Dimensions Skid Package - Direct Drive Model Model EFQT 2, 3, 4, 6 Unit: inches PUMP MODEL NEMA MOTOR FRAME A B C D E F G H J K L M ØN 145T /16 20 EFQT2 184T /16 22 N/A 17 1/ /8 9 7/ /8 215T / T / T / T /8 22 EFQT3 215T 21 1/ /8 31 1/4 21 1/4 11 7/8 8 1/8 20 1/8 24 N/A 256T / T / T / /4 184T /8 29 N/A EFQT4 215T 23 11/ /8 33 1/2 23 7/8 12 7/8 9 1/ / T / T / T / T /16 25 N/A EFQT6 215T / / / / / / /16 256T / /2 286T / /2 326T / Unit: mm PUMP MODEL EFQT2 EFQT3 EFQT4 EFQT6 NEMA MOTOR FRAME A B C D E F G H J K L M ØN 145T T N/A T T T T T N/A 256T T T T N/A 215T T T T T N/A 215T T T T (803) (p) (803) (f) rev. 04/ /16 14

27 Dimensions Skid Package - Direct Drive Model Model EFQT 8, 10, 12 Unit: inches PUMP MODEL NEMA MOTOR FRAME A B C D E F G H J K L M ØN 215T / /2 256T / T / /2 EFQT8 326T 33 1/ /8 48 3/ / / / / T / T / /2 N/A 215T / T / /2 EFQT10 286T / /4 49 1/4 33 1/2 28 3/8 16 5/8 31 1/4 326T / T / /2 405T / /2 256T 286T EFQT12 326T 365T 405T 445T Consult Factory Unit: mm PUMP MODEL EFQT8 EFQT10 EFQT12 NEMA MOTOR FRAME A B C D E F G H J K L M ØN 215T T T T T T N/A 215T T T T T T T 286T 326T 365T Consult Factory 405T 445T 27 (803) (p) (803) (f) rev. 04/ /16 13/

28 Dimensions Skid Package - Direct Drive Model Model EFQU 3, 4, 6 Unit: inches NEMA PUMP MOTOR MODEL FRAME A B C D E F G H J K L M ØN 145T / T /8 22 EFQU3 215T 21 1/ /8 31 1/ /8 24 N/A 256T / T / /2 184T / T /4 32 N/A EFQU4 256T 24 3/ / / / /4 9 5/ / /4 286T / /16 326T / T / T /8 30 N/A 256T / /2 EFQU6 27 3/ /4 26 5/ / / /16 286T 63 3/ T 63 3/8 365T / Unit: mm NEMA PUMP MOTOR MODEL FRAME A B C D E F G H J K L M ØN 145T T EFQU3 215T N/A 256T T T T N/A EFQU4 256T T T T T N/A 256T EFQU T T T (803) (p) (803) (f) rev. 04/15

29 Dimensions Skid Package - Piggy Back Model Model EFQT 2, 3, 4, 6 Unit: inches PUMP MODEL EFQT2 NEMA MOTOR FRAME A B C D E F G H J K L M ØN 145T / T / /4 17 5/ /8 9 7/16 215T / T / /4 18 5/ T 32 1/2 39 7/ T /8 18 1/2 EFQT3 215T 22 1/ /8 30 1/4 20 1/4 11 7/8 13 3/4 20 7/8 20 1/2 256T /8 25 1/2 286T 43 1/2 50 7/8 28 N/A 145T / /4 184T /8 22 EFQT4 215T 23 5/ /8 33 1/2 23 7/8 12 7/8 14 9/ / T / T / T 38 1/2 48 1/ /2 14 7/8 184T / T 40 1/2 50 1/ /2 EFQT / / / / /16 256T / /16 286T / T / Unit: mm PUMP MODEL EFQT2 NEMA MOTOR FRAME A B C D E F G H J K L M ØN 145T T T T T T EFQT3 215T T T N/A 145T T EFQT4 215T T T T T T EFQT T T T (803) (p) (803) (f) rev. 04/ /16 14

30 Dimensions Skid Package - Piggy Back Model Model EFQT 8, 10, 12 Unit: inches PUMP MODEL EFQT8 NEMA MOTOR FRAME A B C D E F G H J K L M ØN 215T 46 1/2 56 3/ /2 N/A 256T /8 16 3/ /2 286T / / / /16 326T / /2 33 1/2 16 3/4 31 1/2 365T / T 34 1/ /8 14 1/4 32 1/ /2 N/A 215T /8 31 N/A 256T / T / EFQT10 326T 33 1/ /8 49 1/4 33 1/2 28 3/8 16 5/8 31 1/ T / T / T 286T EFQT12 326T 365T 405T 445T Consult Factory Unit: mm PUMP MODEL EFQT8 NEMA MOTOR FRAME A B C D E F G H J K L M ØN 215T N/A 256T T T T T N/A 215T N/A 256T T EFQT10 326T T T T 286T EFQT12 326T 365T 405T 445T Consult Factory 8 13/ (803) (p) (803) (f) rev. 04/15

31 Dimensions Skid Package - Piggy Back Model Model EFQU 3, 4, 6 Unit: inches NEMA PUMP MOTOR MODEL FRAME A B C D E F G H J K L M ØN 145T /8 17 1/2 184T /8 18 1/2 EFQU3 215T /8 30 1/ /4 21 5/8 20 1/2 256T /8 24 1/2 286T /8 27 1/2 N/A 184T / T /4 24 EFQU4 256T 24 1/ / / / / / / /4 286T / /16 326T / T / /16 215T /8 26 N/A EFQU6 256T /8 27 1/ /2 27 3/ /4 26 5/ /4 16 5/16 286T / T / / T / /2 Unit: mm PUMP MODEL EFQU3 EFQU4 EFQU6 NEMA MOTOR A B C D E F G H J K L M ØN FRAME 145T T T T T N/A 184T T T T T T T N/A 256T T T T (803) (p) (803) (f) rev. 04/15

32 Dimensions Skid Package - Side By Side Model Model EFQT 2, 3, 4, 6 Unit: inches PUMP MODEL EFQT2 EFQT3 EFQT4 EFQT6 Unit: mm PUMP MODEL EFQT2 EFQT3 EFQT4 EFQT6 NEMA MOTOR A B C D E F G H J K L M ØN FRAME 145T 184T / /8 9 7/16 4 1/4 215T 6 256T / T 41 1/ T 32 11/ /8 25 1/2 215T 31 1/4 21 1/4 11 7/8 7 1/ T 27 3/ /8 286T /4 27 7/8 30 N/A 145T 35 5/ /4 2 3/4 26 7/8 184T / /16 215T 28 3/8 35 7/ /2 23 7/8 12 7/8 8 1/ T /4 35 5/ / T /8 35 7/ T T 47 1/ /8 27 5/8 31 1/4 215T 47 1/2 31 1/ / / / /16 256T / / /2 37 5/16 286T 49 1/2 29 1/8 27 3/4 33 1/2 16 3/4 326T /2 38 7/ / NEMA MOTOR A B C D E F G H J K L M ØN FRAME 145T 184T T T T T T T T N/A 145T T T T T T T T T T T (803) (p) (803) (f) rev. 04/15

33 Dimensions Skid Package - Side By Side Model Model EFQT 8, 10, 12 Unit: inches PUMP MODEL EFQT8 EFQT10 EFQT12 Unit: mm PUMP MODEL EFQT8 EFQT10 EFQT12 NEMA MOTOR A B C D E F G H J K L M ØN FRAME 215T 53 1/4 37 1/4 18 5/8 256T /2 286T / /8 48 3/ / / /2 326T /2 365T T /2 45 1/ / /2 N/A 8 9/16 215T T 34 3/4 54 3/4 32 3/4 286T /4 33 1/2 28 3/8 16 1/2 326T T / T / T 286T 326T 365T Consult Factory 405T 445T NEMA MOTOR A B C D E F G H J K L M ØN FRAME 215T T T T T T N/A T T T T T T T 286T 326T 365T Consult Factory 405T 445T 33 (803) (p) (803) (f) rev. 04/15

34 Dimensions Skid Package - Side By Side Model Model EFQU 3, 4, 6 Unit: inches PUMP MODEL EFQU3 EFQU4 EFQU6 Unit: mm PUMP MODEL EFQU3 EFQU4 EFQU6 NEMA MOTOR FRAME A B C D E F G H J K L M ØN 145T 41 1/2 184T /8 215T 32 1/2 31 1/ T 27 3/ T /4 27 7/8 N/A 184T T 28 3/4 34 3/8 27 3/ T / / /4 8 1/ /4 286T /4 34 5/ / /16 326T / /2 184T 47 1/4 31 1/4 N/A 215T 47 1/2 31 1/4 29 7/8 31 1/2 39 7/16 256T /2 38 3/4 26 5/ /4 9 5/8 286T 49 1/2 33 1/2 16 3/4 326T /2 40 1/2 31 1/ T /4 40 9/ / /2 NEMA MOTOR FRAME A B C D E F G H J K L M ØN 145T T T T T N/A 184T T T T T T N/A 215T T T T T (803) (p) (803) (f) rev. 04/15

35 Technical Data Cartridge Seal Assembly RATAINER SPRING IMPELLER IMPELLER SHIMS SEAL PLATE O-RINGS SLEEVE O-RING IMPELLER SHAFT BELLOWS ROTATING ELEMENT STATIONARY ELEMENT INTEGRAL SHAFT SLEEVE SPRING CENTERING WASHER DRIVE BAND SHEAR RING (SHEARED) STATIONARY SEAT Bearing Types Model Inboard (front) Outboard (back) EFQT2 EFQT3 single row EFQT4 single row double row EFQT6 EFQT8 EFQT10 EFQT12 double row single row double row double row EFQU3 EFQU4 single row double row EFQU6 double row double row 35 (803) (p) (803) (f) rev. 04/15

36 Sectional View Model EFQT 2, 3 Repair Rotating Assembly Figure 1 DRIVE END VIEW SEAL AREA DETAIL 36 (803) (p) (803) (f) rev. 11/15

37 Sectional View Part Numbers Model EFQT 2, 3 Repair Rotating Assembly 37 (803) (p) (803) (f) rev. 11/15

38 Sectional View Model EFQT 2, 3 Figure (803) (p) (803) (f) rev. 11/15

39 Sectional View Part Numbers Model EFQT 2, (803) (p) (803) (f) rev. 11/15

40 Sectional View Model EFQT4 Repair Rotating Assembly Figure 1 DRIVE END VIEW SEAL AREA DETAIL 40 (803) (p) (803) (f) rev. 11/15

41 Sectional View Part Numbers Model EFQT4 Repair Rotating Assembly 41 (803) (p) (803) (f) rev. 11/15

42 Sectional View Model EFQT4 Figure (803) (p) (803) (f) rev. 11/15

43 Sectional View Part Numbers Model EFQT (803) (p) (803) (f) rev. 11/15

44 Sectional View Model EFQT6 Repair Rotating Assembly Figure 1 SEAL AREA DETAIL DRIVE END VIEW 44 (803) (p) (803) (f) rev. 11/15

45 Sectional View Part Numbers Model EFQT6 Repair Rotating Assembly 45 (803) (p) (803) (f) rev. 11/15

46 Sectional View Model EFQT6 Figure (803) (p) (803) (f) rev. 11/15

47 Sectional View Part Numbers Model EFQT (803) (p) (803) (f) rev. 11/15

48 Sectional View Model EFQT8 Repair Rotating Assembly Figure 1 SEAL AREA DETAIL DRIVE END VIEW 48 (803) (p) (803) (f) rev. 11/15

49 Sectional View Part Numbers Model EFQT8 Repair Rotating Assembly 49 (803) (p) (803) (f) rev. 11/15

50 Sectional View Model EFQT8 Figure (803) (p) (803) (f) rev. 11/15

51 Sectional View Part Numbers Model EFQT (803) (p) (803) (f) rev. 11/15

52 Sectional View Model EFQT10 Repair Rotating Assembly Figure (803) (p) (803) (f) rev. 11/15

53 Sectional View Part Numbers Model EFQT10 Repair Rotating Assembly 53 (803) (p) (803) (f) rev. 11/15

54 Sectional View Model EFQT10 Figure (803) (p) (803) (f) rev. 11/15

55 Sectional View Part Numbers Model EFQT (803) (p) (803) (f) rev. 11/15

56 Sectional View Model EFQT12 Please Consult Factory 56 (803) (p) (803) (f) rev. 11/14

57 Sectional View Part Numbers Model EFQT12 Please Consult Factory 57 (803) (p) (803) (f) rev. 11/14

58 Sectional View Part Numbers Model EFQT12 Please Consult Factory 58 (803) (p) (803) (f) rev. 11/14

59 Sectional View Model EFQU 3, 4 Repair Rotating Assembly Figure 1 SEAL AREA DETAIL DRIVE END VIEW 59 (803) (p) (803) (f) rev. 11/15

60 Sectional View Part Numbers Model EFQU 3, 4 Repair Rotating Assembly 60 (803) (p) (803) (f) rev. 11/15

61 Sectional View Model EFQU 3, 4 Figure (803) (p) (803) (f) rev. 11/15

62 Sectional View Part Numbers Model EFQU 3, (803) (p) (803) (f) rev. 11/15

63 Sectional View Model EFQU6 Repair Rotating Assembly Figure 1 SEAL AREA DETAIL DRIVE END VIEW 63 (803) (p) (803) (f) rev. 11/15

64 Sectional View Part Numbers Model EFQU6 Repair Rotating Assembly 64 (803) (p) (803) (f) rev. 11/15

65 Sectional View Model EFQU6 Figure (803) (p) (803) (f) rev. 11/15

66 Sectional View Part Numbers Model EFQU (803) (p) (803) (f) rev. 11/15

Contents. Identification

Contents. Identification Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions

More information

EVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage

EVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage Model / G / L Contents Item No. Specifications Selection Performance Pump Sectional Chart Curve Dimensions View 3 5 10 18 G32 G45 G64 L3 L5 L10 L18 L32 L45 L64 803 804 803 804 805 806 807 808 809 810 811

More information

GH General Horizontal, Close Coupled and Frame Mounted Pumps

GH General Horizontal, Close Coupled and Frame Mounted Pumps GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling

More information

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates

More information

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.

SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451. Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component

More information

SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS

SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS GRpumps.com S U P E R T S P E C I F I C A T I O N S SIZES MATERIALS OF CONSTRUCTION MAX. CAPACITY MAX. HEAD MAX. SOLIDS 3", 4", 6", 8", 10" (75 mm, 100 mm, 150

More information

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps 855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to

More information

Contents Project: Model: Chk d: Date:

Contents Project: Model: Chk d: Date: Contents Model No. Specifications Selection Performance Dimensions Sectional Chart Curve Pump Motor Data View DWU6.4S DWU6.75S - DWU6.4S DWU6.75S DWU6.S -9-0 - -8-48 -56-46 DWU6.5S DWU6.4 - DWU6.75 DWU6.

More information

Centrifugal End Suction Fire Pumps

Centrifugal End Suction Fire Pumps Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These

More information

M50 L50 Series Multistage Regenerative Turbine Pumps

M50 L50 Series Multistage Regenerative Turbine Pumps Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal

More information

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel

More information

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135

More information

Bulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter

Bulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)

More information

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining

Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high

More information

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

BSM ROTARY GEAR PUMPS

BSM ROTARY GEAR PUMPS FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are

More information

Self-Priming Fiberglass Pumps

Self-Priming Fiberglass Pumps Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced

More information

CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM

CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice

More information

High Temperature Chemical Process Inline Pumps

High Temperature Chemical Process Inline Pumps Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167

More information

DWO DWO DWO DWO

DWO DWO DWO DWO Model Contents Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data 506 704 006 70 70 705 708 709 7 006 706 4006 707 www.pumpsebara.com 700 (t) 80 7-5005

More information

Series 4XSHM 18 Frame Driver 3" Spherical Solids Handling

Series 4XSHM 18 Frame Driver 3 Spherical Solids Handling Series 4XSHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader

More information

General Catalog. A New Vision for Quality Pumps. General Catalog

General Catalog. A New Vision for Quality Pumps. General Catalog General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve

More information

NJK Series ISO Standard End-Suction Centrifugal Pumps

NJK Series ISO Standard End-Suction Centrifugal Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28

More information

Gusher s s Advantages

Gusher s s Advantages Gusher s s Advantages R&D in Pump design Gusher s s Advantages Gusher Vertical Cantilever Pumps up to 15,000 GPM Gusher Vortex Pumps Special Mounting Plates Gusher SC-CC CC Stainless & Cast Iron Gusher

More information

MYERS 4VCDP. 4" Solids Handling

MYERS 4VCDP. 4 Solids Handling MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"

More information

evmsu Stainless Steel Vertical Multistage Pump curve SPeciFicationS

evmsu Stainless Steel Vertical Multistage Pump curve SPeciFicationS evmsu curve SPeciFicationS the specifications below qualify the curves shown on the following pages. the curves refer to effective speed of rpm for 2-pole asynchronous motors at z. Measurements were carried

More information

LIQUID-SPECIFIC PRODUCT LINE: STAINLESS STEEL VANE PUMPS PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 NOMINAL FLOW RATES 2

LIQUID-SPECIFIC PRODUCT LINE: STAINLESS STEEL VANE PUMPS PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 NOMINAL FLOW RATES 2 Page 445.1 PRODUCT DESCRIPTION SERIES OPERATING RANGE 1 Rotary vane pumps are used for liquid transfer in applications ranging from chemicals to LP gas. Vanes extend from slots on the rotor, sweeping liquid

More information

Inline Pumps. Product review. Wilo-VeroLine-IPL. Single-head pumps: Single stage inline, flanged, long coupled, mechanical sealed dry rotor pump

Inline Pumps. Product review. Wilo-VeroLine-IPL. Single-head pumps: Single stage inline, flanged, long coupled, mechanical sealed dry rotor pump Product review North America Duty charts 7 RPM - Hz - North America 9 IPL. 7 IPL IPL. IPL IPL. RPM - Hz - North America IPL. IPL IPL. IPL Single-head pumps: Single stage inline, flanged, long coupled,

More information

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858

Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:

More information

Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.

Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel. Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE

More information

SSP. American Stainless Pumps Stainless Steel Pumps for the Commercial Marketplace.

SSP. American Stainless Pumps Stainless Steel Pumps for the Commercial Marketplace. SSP Stainless Steel Open or Enclosed Impellers End Suction Back Pullout Close Coupled High Efficiency Family of Curves 3500 RPM Head in Feet Capacity - Gallons Per Minute Applications Dishwashing Machines

More information

Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS

Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a

More information

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps

franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering

More information

Engineering Data Pack GlobalGear Series Pump US

Engineering Data Pack GlobalGear Series Pump US Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral

More information

ITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6" Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems

ITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6 Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems B65-32L ITT Residential Water Systems Goulds s 65L, 95L, 12L, 16L, 2L, 32L 6" Stainless Steel Submersible s 6 Hz High Capacity For 6" and larger wells Goulds s is a brand of ITT Corporation. www.goulds.com

More information

PumPs. jacketed molten sulfur PumPs. Pumps Mixers Strainers Engineered Systems and Controls.

PumPs. jacketed molten sulfur PumPs. Pumps Mixers Strainers Engineered Systems and Controls. Pumps Mixers Strainers Engineered Systems and Controls jacketed molten sulfur PumPs PumPs for molten sulfur and other fluids requiring pumping at controlled temperatures. www.haywardgordon.com introduction

More information

PWH API 610 SINGLE STAGE OH2

PWH API 610 SINGLE STAGE OH2 PWH API 610 SINGLE STAGE OH2 PWH API 610 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain

More information

ITT. AC Series 8300 Split Case Pumps. A-C Pump. Commercial Water. A-C Pump is a brand of ITT Corporation. Engineered for life

ITT. AC Series 8300 Split Case Pumps. A-C Pump. Commercial Water. A-C Pump is a brand of ITT Corporation. Engineered for life AC Series 83 Split Case Pumps is a brand of ITT Corporation. Engineered for life Engineering Specification for AC Series 83 base mounted double suction pumps Double Suction, Horizontal Split Case Pumps

More information

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

GRUNDFOS PRODUCT GUIDE LM, LP. Single-stage close coupled in-line circulating pumps 60 Hz

GRUNDFOS PRODUCT GUIDE LM, LP. Single-stage close coupled in-line circulating pumps 60 Hz GRUNDFOS PRODUCT GUIDE LM, LP Single-stage close coupled in-line circulating pumps 6 Hz LM, LP Table of contents 1. Product introduction 3 Introduction 3 Applications 3 Features and benefits 3 Identification

More information

High-Head, High-Performance, Self-Priming Trash Pumps

High-Head, High-Performance, Self-Priming Trash Pumps ULTRA V SERIES High-Head, High-Performance, Self-Priming Trash Pumps A HISTORY OF INNOVATION Gorman-Rupp has been revolutionizing the pumping industry since 1933. Many of the innovations introduced by

More information

CRN90. Parts List & Kits. CR Series. Parts List & Kits CRN90. GRUNDFOS Commercial Industrial Service Manual

CRN90. Parts List & Kits. CR Series. Parts List & Kits CRN90. GRUNDFOS Commercial Industrial Service Manual Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence P & Kits CRN90 GRUNDFOS Commercial Industrial Service Manual CRN90 P & Kits Contents P Spare t Kits Accessories

More information

Six-Inch Submersible Pumps

Six-Inch Submersible Pumps FW1 87 5 thru 5 5 to GPM Supersedes Six-Inch Submersible Pumps Series 6P and 6T High capacity six-inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water

More information

Baker SPD CATALOG INTRODUCTION

Baker SPD CATALOG INTRODUCTION Baker SPD CATALOG INTRODUCTION Baker SPD was founded in 1981 and is located in San Antonio, Texas. Baker SPD is a leading manufacturer of a wide range of Drilling Products, now including the MUD HOG Centrifugal

More information

Parts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques

Parts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques GRUNDFOS Pumps Corporation 3131 N. Business Park Avenue Fresno, CA 93727 Parts List and Kits CONTENTS Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques L-CR-SM-016 (6/99)

More information

Goulds Severe Duty Slurry Pump

Goulds Severe Duty Slurry Pump Goulds 5500 Severe Duty Slurry Pump 5500 Proven leadership in mining and mineral processing Proven Leadership 100 years of slurry pumping experience. Many industry firsts including: hard metal slurry pump,

More information

Hydra-Cell T80 Series Pumps Design Advantages

Hydra-Cell T80 Series Pumps Design Advantages Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment

More information

A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer

A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer THE LEADING FORCE behind liquids since 1857 A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer The Roper Pump Family of Gear

More information

KG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM)

KG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM) Grinder Pumps 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP series centrifugal grinder pumps easily handle residential, commercial or industrial sanitary waste,

More information

ISO 2858 Back Pullout End Suction Centrifugal Pumps

ISO 2858 Back Pullout End Suction Centrifugal Pumps ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed

More information

Technical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS

Technical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS Technical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS Wet End Rotation Volute Nozzles Impeller Wear Rings Shaft Bearing Frame Bearing Radial/Thrust Lubrication Seal Motor Lifting Bail Volute Discharge

More information

griswold 811 performance curves

griswold 811 performance curves griswold 811 performance curves pump size rpm page # 1 1/2 x 1-6AA 1800 1 3600 1 3 x 1 1/2-6AB 1800 1 3600 1 3 x 2-6AC 1800 1 3600 1 LF 1 1/2 x 1-8AA 1800 2 3600 2 1 1/2 X 1-8AA 1800 2 3600 2 3 X 1 1/2-8AB

More information

End suction back pull-out pumps for general industry, mining, rural and building services

End suction back pull-out pumps for general industry, mining, rural and building services End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive

More information

PWA-LF LOW FLOW ANSI PROCESS PUMP

PWA-LF LOW FLOW ANSI PROCESS PUMP PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no

More information

GRUNDFOS CR SERVICE MANUAL CR5. Parts List & Kits. Contents. Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques

GRUNDFOS CR SERVICE MANUAL CR5. Parts List & Kits. Contents. Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques GRUNDFOS CR SERVICE MANUAL CR5 Parts List & Kits Contents Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques 2 Exploded View CR5 Parts List & Kits CR5 Pos. Part Description

More information

Hydracel High Pressure Pump

Hydracel High Pressure Pump Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1

More information

HYDROMATIC SPX50/SPX50H EXPLOSION PROOF, SEWAGE EJECTOR

HYDROMATIC SPX50/SPX50H EXPLOSION PROOF, SEWAGE EJECTOR PERFORMANCE DATA Wholesale Products Page: 6800-1 SPX50 RPM: 1750 Discharge: 2 Solids: 2 SPX50H RPM: 1750 Discharge: 1 ½ Solids: ¾ 40 35 TOTAL HEAD IN FEET 30 25 20 SPX50 SPX50H 15 10 0 10 20 30 40 50 60

More information

50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.

50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc. Performance curves 50 Hz [m] 11,6 data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s Head Tolerances acc. ISO 9906 Annex A 11,2 10,8 10,4 10 9,6 9,2 8,8 8,4 8 7,6 7,2 6,8 6,4 6 5,6

More information

Goulds CV 3196 i-frame. Non-Clog Process Pump with i-alert Patented Intelligent Monitoring

Goulds CV 3196 i-frame. Non-Clog Process Pump with i-alert Patented Intelligent Monitoring Goulds CV 3196 i-frame Non-Clog Process Pump with i-alert Patented Intelligent Monitoring CV 3196 i-frame Recessed Impeller Designed for Non-Clog Solids Handling Capacities to 27 GPM (61 m 3 /h) Heads

More information

VIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432

VIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432 Page 310.1 FEATURES SERIES 32 and 432 3 GPM (.7 m³/hr) Size Shown. or Mechanical seal type. Valve on casing. SERIES 432 5 GPM (1 m³/hr) Mechanical seal type. Shown with valve on head. C, F & FH Sizes J

More information

CENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES

CENTRIFUGAL PUMPS 13 CLOSE-COUPLED FEATURES FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed

More information

Bulletin C Dean Pump Division. R Series High Temperature Pumps R400/R4000 RWA RMA5000 RA2000/RA3000

Bulletin C Dean Pump Division. R Series High Temperature Pumps R400/R4000 RWA RMA5000 RA2000/RA3000 Bulletin C 1.4.4 Dean Pump Division R Series High Temperature Pumps R4/R4 RMA RWA RA2/RA3 R Series High Temperature (Hot Oil/Hot Water) Centrifugal Process Pumps Process Industries Heat Transfer OEM s,

More information

Operation & Maintenance Manual

Operation & Maintenance Manual Magnatex 3575 Series Operation & Maintenance Manual Mechanical Seal ANSI Process Pumps Phone: 713-972-8666 inquiries@magnatexpumps.com Fax: 713-972-8665 www.magnatexpumps.com TABLE OF CONTENTS SECTION

More information

Versatile, Reliable Pumps for a Wide Range of Applications D10 Series

Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

More information

THE LEADING FORCE behind liquids since 1857

THE LEADING FORCE behind liquids since 1857 THE LEADING FORCE behind liquids since 1857 High Capacity Bulk Liquid Handling Pumps - For loading/unloading transport truck tankers, railway tank cars, and barges - High flow rate transfer capability

More information

HYDROMATIC SKHS SERIES SUBMERSIBLE NON-CLOG, SEWAGE EJECTOR

HYDROMATIC SKHS SERIES SUBMERSIBLE NON-CLOG, SEWAGE EJECTOR PERFORMANCE DATA Wholesale Products Page: 6560-1 RPM: 450 Discharge: 2 Solids: 2 80 70 2 HP 60 TOTAL DYNAMIC HEAD-FEET 50 40 0 1 HP 1-1/2 HP 1/2 HP 20 10 0 0 2 64 96 128 160 192 CAPACITY-U.S. G.P.M. The

More information

Vane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi)

Vane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) Vickers Vane Pumps VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) 5008.00/EN/0596/A A.25 Introduction From the

More information

Flow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS " CCW " CCW

Flow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS  CCW  CCW 6 Hz LS EXTENSION 4" Submersible Pumps MODEL LS 5LS, 7LS, LS, LS, 8LS, 25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor

More information

Ultra-Matic Air Valve System

Ultra-Matic Air Valve System Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.

More information

Engineering Data Pack C Series and 4300 Series Pumps

Engineering Data Pack C Series and 4300 Series Pumps Engineering Data Pack Series and 4300 Series Pumps Excellence at work. Excellence in life. Table of ontents Product Overview 3 2F Features 3 2E Features 3 2B/4310 Features 3 K2B Features 3 2FA Features

More information

Contents. General data. Technical data, SPK/CRK. General data, MTA(D) Technical data, MTA(D) General data, MTR. General data, MTC

Contents. General data. Technical data, SPK/CRK. General data, MTA(D) Technical data, MTA(D) General data, MTR. General data, MTC Contents General data Performance range page Product range page 6 General data, MTA(D) Performance range, MTA(D) page 8 Product description, MTA(D) page 9 Pumped liquids, MTA(D) page 9 Pump, MTA(D) page

More information

Peerless Pump FULL PRODUCT LINE. Brochure B Sterling Fluid Systems (USA), Inc.

Peerless Pump FULL PRODUCT LINE. Brochure B Sterling Fluid Systems (USA), Inc. Peerless Pump FULL PRODUCT LINE Sterling Fluid Systems (USA), Inc. Brochure B-1270 Vertical Industrial and Process Axial and Mixed Flow for Large Volume Pumping Encased (Can ) Water and Process Liquid

More information

NDP-25 Specifications

NDP-25 Specifications NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air

More information

General Service Centrifugal Pump. 3. Designation. 1. Application. 2. Design. 4. Operating Data. Operating Instructions Nº A

General Service Centrifugal Pump. 3. Designation. 1. Application. 2. Design. 4. Operating Data. Operating Instructions Nº A Operating Instructions Nº A2744.8.1E/1 KSB Megabloc General Service Centrifugal Pump Line : Version: Mega Bloc 1. Application The KSB Megabloc pump is designed for pumping clean or turbid liquids and it

More information

Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3

Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3 Special Purpose Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x 20...2 Technical Data...3 Triple Duty Valve - Iron Body Style TDV 125# Flanged 2-20...4 Technical Data...5 Pressure

More information

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE

More information

VCMVerticalInlineProcessPump

VCMVerticalInlineProcessPump VCMVerticalInlineProcessPump SingleStageVerticalCentrifugal PumpsforGeneralService, Petroleum and Petrochemical Applications. VCM-0000 September 1,1999 4600West Dickman Road Battle Creek,Michigan 49015-1098

More information

series 1500 horizontal pumps

series 1500 horizontal pumps Fybroc Division series 1500 horizontal pumps INSTALLATION MANUAL INDEX Page Page Fybroc Warranty 3 Assembly/Disassembly Procedures 10 Installation Instructions 4 General 10 Location 4 Disassembly 10 Foundation

More information

blackops: Blackmer Optimum Pump Solutions

blackops: Blackmer Optimum Pump Solutions blackops: Blackmer Optimum Pump Solutions blackops is a selection software program created specifically for Blackmer s System One centrifugal and positive displacement pump lines. The program allows you

More information

LITERS PER MINUTE GALLONS PER MINUTE

LITERS PER MINUTE GALLONS PER MINUTE TOTAL HEAD IN FEET TOTAL HEAD IN METERS Pump Specifications D3684LSG, D3684LSGX Omnivore 2HP Duplex Grinder Packages LITERS PER MINUTE 200 190 180 170 160 150 140 130 0 50 100 150 200 LSGX - TWO STAGE

More information

POMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO

POMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO POMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO DIAPHRAGM PUMP Hydra-Cell Features Heavy-duty industrial construction Quiet, smooth operation Hydraulically balanced diaphragms Runs dry without damage Positive

More information

COMMERCIAL PUMPS SERIES 4700 VERTICAL MULTISTAGE PUMP INSTALLATION AND OPERATING INSTRUCTIONS

COMMERCIAL PUMPS SERIES 4700 VERTICAL MULTISTAGE PUMP INSTALLATION AND OPERATING INSTRUCTIONS FILE NO.: 47.80 DATE: Dec. 20, 2007 SUPERSEDES: 47.80 DATE: Feb. 20, 2007 INSTALLATION AND OPERATING INSTRUCTIONS COMMERCIAL PUMPS SERIES 4700 VERTICAL MULTISTAGE PUMP Page 1 of 31 General Information

More information

G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16

G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16 G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21

More information

MAINTENANCE AND REPAIR INSTRUCTIONS

MAINTENANCE AND REPAIR INSTRUCTIONS MAINTENANCE AND REPAIR INSTRUCTIONS TYPE TH PUMPS Peerless Pump Company Indianapolis IN, 46207-7026 4849357 TABLE OF CONTENTS Maintenance Page 1 & 2 Disassembly Page 5 & 6 Impeller Clearance 3 Reassembly

More information

Application & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump

Application & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November

More information

Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA

Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.

More information

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.

PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD. END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,

More information

BERKELEY CENTRIFUGAL PUMPS AND ACCESSORIES CANADA 2013 LIST PRICES

BERKELEY CENTRIFUGAL PUMPS AND ACCESSORIES CANADA 2013 LIST PRICES BERKELEY CENTRIFUGAL PUMPS AND ACCESSORIES CANADA 2013 LIST PRICES CB1525P EFFECTIVE: MARCH 1, 2013 SUPERSEDES ALL PREVIOUS PRICE LISTS ALL TAXES EXTRA. ALL PRICES F.O.B. FACTORY. LIST PRICES SHOWN IN

More information

DSC3/DSCA3, DSZ3. EBARA Submersible Sewage and Propeller Pumps. Technical Data Contents Project: Model: Chk d: Date:

DSC3/DSCA3, DSZ3. EBARA Submersible Sewage and Propeller Pumps. Technical Data Contents Project: Model: Chk d: Date: Technical Data Contents Section Page Motor Protection 3-238 Thrust Bearing Thermal Protection 3-239 Leakage Detector 3-20 Cable Entry 3-21 Cable Connector 3-21.1 Mechanical Seal Sectional DWG 3-22 Mechanical

More information

technosubtp series centrifugal auto prime trash pumps

technosubtp series centrifugal auto prime trash pumps technosubtp series centrifugal auto prime trash pumps 4tSTap standard trash auto prime FEATURES Technosub Standard Trash Auto Prime pumps are specifically designed to effectively handle a wide range of

More information

BBT/BBT-D Two Stage Radially Split Between Bearings Process Pump API 610, 9th Edition (ISO 13709)

BBT/BBT-D Two Stage Radially Split Between Bearings Process Pump API 610, 9th Edition (ISO 13709) BBT/BBT-D Two Stage Radially Split Between Bearings Process Pump API 610, 9th Edition (ISO 13709) Sulzer Pumps Sulzer Pumps combines more than 135 years of experience in pump development and manufacturing

More information

Hydraulic gear pumps and motors

Hydraulic gear pumps and motors PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.

More information

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number) 4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) USA: (97) 77-947 Canada: (905) 457-622 International:

More information

316 Series Engine Driven DESCRIPTION MAINTENANCE SHIM ADJUSTMENT. Specifications Information and Repair Parts Manual

316 Series Engine Driven DESCRIPTION MAINTENANCE SHIM ADJUSTMENT. Specifications Information and Repair Parts Manual Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

General Service Centrifugal Pump. 1. Application. 3. Designation. 2. Design. 4. Operating Data. Operating Instructions Nº A2744.

General Service Centrifugal Pump. 1. Application. 3. Designation. 2. Design. 4. Operating Data. Operating Instructions Nº A2744. Operating Instructions Nº A2744.8E/2 KSB Megabloc General Service Centrifugal Pump Line : Version: Mega Bloc 1. Application The KSB Megabloc pump is designed for pumping clean or turbid liquids and it

More information

Pumps. Air Blower DESCRIPTION. Air Blower. Air Blower Part. HS Regenerative Blowers

Pumps. Air Blower DESCRIPTION. Air Blower. Air Blower Part. HS Regenerative Blowers Air Blower HS Regenerative Blowers Capacities To 340 Cfm Pressures To 180 W.C 1/3 T0 11.5 H.P., In Voltages To Suit Most Applications Winding Embedded Thermal Protection Integral Inlet And Discharge Silencers

More information