ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
|
|
- Basil Parker
- 5 years ago
- Views:
Transcription
1 ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps Engineered for life
2 A Full Range of Product Features Superior Materials of Construction: AISI Type 316L stainless steel pump parts for reduced corrosion and improved strength and ductility. Frame Mounted Design: Flexibility of installation and driver arrangements. Back Pull-Out Design: Simplifi es maintenance when used with spacer type coupling. Cast Iron Power Frame: Rigidly supported, grease lubricated ball bearing assembly. Mechanical Seal: John Crane Type 21 mechanical seal. Drive Motors: NEMA design T-frame or JM motors in single or three phase. Suction and Discharge Flanges: Mate with ANSI class 15 fl anges. Close-Coupled Design: Compact design saves space and simplifi es maintenance. 2
3 Performance Coverage, 35 and 1 RPM RPM 15 5 TOTAL DYNAMIC HEAD SH 11SH 1SH 7SH 9SH 4SH 8SH 5SH SH 27SH 22SH 6SH 23SH 28SH m 3 /hr CAPACITY 15 1 RPM TOTAL DYNAMIC HEAD 2 5 1SH 11SH 24SH SH 27SH 28SH 1 9SH 4SH 7SH 8SH 5SH 6SH 22SH 23SH m 3 /hr 18 CAPACITY 3
4 SSH S/M-Group Numbering System Example Product 24 SH 1 Q 1 2 A Mechanical Seals and O-Ring = Pre-engineered standard For optional mechanical seal modify catalog order no. with seal code listed below. Seal Rotary John Crane Type 21 Mechanical Seal Metal Parts Stationary Elastomers Part No Frames Frames Viton Carbon Sil-Carb 316 SS 1K27 1K45 2 EPR 1K19 1K2 5 Sil-Carb Sil-Carb Viton 1K64 1K Option For optional impeller diameters modify catalog order no. with impeller code listed below. Select optional impeller diameter from pump performance curve. Pump Size 9SH 1SH 11SH 4SH 7SH 5SH 8SH 6SH 22SH 23SH 24SH SH 27SH 28SH 1 x x x 2-1 1½ x 2½-6 1½ x 2½-8 2 x 2½-6 2 x 2½-8 2½ x 3-6 2½ x x 4 8 1½ x 2½ 1 2 x 2½ 1 2½ x x 4 1 Dia. Dia. Dia. Dia. Dia. Dia. Dia. Dia. Dia. Dia. Dia. Dia. Dia. Dia. A ¾ ¼ B ¾ ¾ ½ 9½ ¼ C ½ ½ D ¾ ¾ 5½ ¼ ¼ E ¾ F ½ 7½ 8¼ G H ¼ J ½ 6½ K 6 L 5½ Motor Enclosure 1 = ODP 5 = TEFC Premium Eff. 2 = TEFC 6 = XP Premium Eff. 3 = Explosion Proof 7 = Wash down 4 = ODP Premium Eff. Motor Voltage 1 = 115/ = 23 5 = 28-23/46 7 = 5 2 = 115/23 4 = 23/46 6 = 46 HP Rating, Potencia nominal C = ½ F = 1.5 J = 5 M = 15 Q = 3 T = 6 D =. G = 2 K = 7.5 N = 2 R = 4 U = E = 1 H = 3 L = 1 P = S = 5 V = 1 Driver: Hertz/Pole/RPM 1 = 6/35/1 3 = 6/1/1 5 = 5/29/1 2 = 6/35/3 4 = 6/1/3 6 = 5/29/3 Material SH = 316L Stainless steel Pump Size 9 = 1 x = 1½ x 2½ 6 8 = 2 x 2½ 8 1 = 1 x = 1½ x 2½ 8 6 = 2½ x = 1 x = 2 x 2½ 6 22 = 2½ x = 3 x = 1½ x 2½ 1 = 2 x 2½ 1 27 = 2½ x = 3 x 4 1 Frame Options Substitute FRM2 FRM3 Description 7 /8" Imp. Bore 1 1 /4" Imp. Bore NOTE: Not all combinations of motor, impeller and seal options are available for every pump model. Please check with G&L on non-cataloged numbers. 4
5 Performance Curves 6 Hz, 35 RPM 6 Model SSH / 9SH Size 1 x 2-6 RPM 35 Curve CN619R 2 5' NPSH R 39 5 A 6 5 /8" DIA. 49 B 6 7 /16" C 5 11 /16" D 5 3 /8" 1' 56 EFF% A 6 5 8" 5 B C D to 1 8" diameter. 2 5 HP 5 3 HP m 3 hr 9 Model SSH / 1SH Size 1 x 2-8 RPM 35 Curve CN613R A 8 27 /64" DIA. B 8 1 /16" C 7 11 /16" D 7 3 /8" E 7 1 /8" 33 6' NPSH R 1' ' ' 42 EFF% A " 1 B C ½ D ½ E 7 1 8" 7½ to 1 8" diameter /2 HP 1 HP m 3 hr 5
6 Performance Curves 6 Hz, 35 RPM Model SSH / 11SH Size 1 x 2-1 RPM 35 Curve CN616R A 1 3 /32" DIA. B 9 17 /32" C 9 1 /8" D 8 3 /4" 3 NPSH R ' 43 27' 45 29' 43 EFF% A " 2 B C D 8¾ 15 to 1 8" diameter HP 2 HP HP m 3 hr Model SSH / 4SH Size 1 1 /2 x 2 1 /2-6 RPM 35 Curve CN488R1 A 6 3 /4" DIA. B 6 3 /8" C 6 1 /16" D 5 5 /8" E 5 5 /16" F 4 11 /16" G 4 3 /8" H 4 3 /16" J 3 7 /8" 5' NPSH R ' 5 HP EFF% 1 HP 7 1 /2 HP A 6¾" 1 B ½ C ½ D E F G H J to 3 16" diameter. 1 2 HP 3 HP m 3 hr 6
7 Performance Curves 6 Hz, 35 RPM B 7 13 /16" 2 Model SSH / 7SH Size 1 1 /2 x 2 1 /2-8 RPM 35 Curve CN491R 2 A 8 1 /4" DIA. C 7" 2 D 6 3 /4" 1 E 6 7 /16" F 6 1 /8" ' NPSH R ' 14' HP EFF% A 8¼" 15 B C 7 1 D 6¾ 1 E ½ F ½ to 3 16" diameter HP 1 HP m 3 hr 6 Model SSH / 5SH Size 2 x 2 1 /2-6 RPM 35 Curve CN494R1 A 6 7 /8" DIA. 5 6' NPSH R B 6 7 /16" C 5 13 /16" 1 D 5 1 /2" E 5 1 /8" 1 F 4 13 /16" G 4 7 /16" H 4 1 /4" 5 6 1' ' 68 19' 67 66EFF% 15 HP 1 HP HP 5 HP A 6 7 8" 15 B C D 5½ 1 E ½ F ½ G H 4¼ 5 to 5 32" diameter m 3 hr 7
8 Performance Curves 6 Hz, 35 RPM B 7 3 /4" D 7 3 /16" 2 E 6 7 /8" F 6 3 /16" Model SSH / 8SH Size 2 x 2 1 /2-8 RPM 35 Curve CN497R1 A 8 1 /4" DIA. C 7 1 /2" 5 6 NPSH R 69 1 HP 1' 71 13' 16' HP 21' 69 EFF% 2 HP HP A 8¼" B 7¾ 2 C 7½ 2 D E F to ¼" diameter m 3 hr Model SSH / 6SH Size 2 1 /2 x 3-6 RPM 35 Curve CN5R A 7 5 /16" DIA. B 7 1 /8" C 6 15 /16" D 6 11 /16" E 6 3 /8" 15 F 6 1 /16" G 5 5 /8" 6 NPSH R 7' 7 7 1' 68 13' 66 15' 2' ' 63 A " B C D E F G to 5 16" diameter EFF% HP 2 HP 15 HP HP m 3 hr 1 8
9 Performance Curves 6 Hz, 1 RPM 5 4 Model SSH / 9SH Size 1 x 2-6 RPM 1 Curve CN62R A 6 5 /8" DIA. B 6 7 /16" NPSH R 5 4' 55 5' 56 6' A 6 5 8" ¾ B ¾ C ½ D ½ 3 C 5 11 /16" D 5 3 /8" 55 EFF% to 1 8" diameter HP 1 2 HP Model SSH / 1SH Size 1 x 2-8 RPM 1 Curve CN614R A 8 27 /64" DIA. B 8 1 /16" 6 C 7 11 /16" D 7 3 /8" E 7 1 /8" 4' NPSH R 5' 42 6' 3 4 HP EFF% 1 HP HP A " 1½ B ½ C D ¾ E ¾ to 1 8" diameter
10 Performance Curves 6 Hz, 1 RPM Model SSH / 11SH Size 1 x 2-1 RPM 1 Curve CN617R 12 NPSH R A 1 3 /32" B 9 17 /32" C 9 1 /8" D 8 3 /4" ' 43 17' EFF% A " 3 B C D 8¾ 2 to 1 8" diameter. 4 1 HP 3 HP 2 2 HP Model SSH / 4SH Size 1 1 /2 x 2 1 /2-6 RPM 1 Curve CN489R1 4' NPSH R A 6 3 /4" DIA. B 6 3 /8" C 6 1 /16" D 5 5 /8" E 5 5 /16" ' EFF% A 6¾" 1 B C D ¾ E ¾ F ½ G ½ H ½ J ½ 5 2 F 4 11 /16" G 4 3 /8" H 4 3 /16" 1 HP to 3 16" diameter. J 3 7 /8" 3 4 HP HP i m 3 hr 1
11 Performance Curves 6 Hz, 1 RPM Model SSH / 7SH Size 1 1 /2 x 2 1 /2-8 RPM 1 Curve CN492R A 8 1 /4" DIA. B 7 13 /16" C 7" D 6 3 /4" E 6 7 /16" F 6 1 /8" 38 6' NPSH R ' 13' EFF% 2 HP A 8¼" 2 B C 7 1½ D 6¾ 1½ E F to 3 16" diameter HP HP m 3 hr Model SSH / 5SH Size 2 x 2 1 /2-6 RPM 1 Curve CN495R A 6 7 /8" DIA. 48 4' NPSH R 1 4 B 6 7 /16" C 5 13 /16" D /2" E 5 1 /8" F 4 13 /16" G /16" ' ' 67 12' 66 EFF% 2 HP A 6 7 8" 2 B C ½ D 5½ 1½ E F G ¾ H 4¼ ¾ to 5 32" diameter. 5 H 4 1 /4" HP HP 1 HP m 3 hr 11
12 Performance Curves 6 Hz, 1 RPM Model SSH / 8SH Size 2 x 2 1 /2-8 RPM 1 Curve CN498R1 A 8 1 /4" DIA. B 7 3 /4" 6 C 7 1 /2" D 7 3 /16" 5 E 6 7 /8" 4 3 F 6 3 /16" 48 5' NPSH R ' 69 9' 11' EFF% 3 HP A 8¼" 3 B 7¾ 3 C 7½ 2 D E ½ F ½ to 5 32" diameter /2 HP 2 HP m 3 hr 2 Model SSH / 6SH Size 2 1 /2 x 3-6 RPM 1 Curve CN52R A 7 5 /16" DIA. B 7 1 /8" C 6 15 /16" D 6 11 /16" E 6 3 /8" F 6 1 /16" G 5 5 /8" 57 4' NPSH R 62 5' ' 9' 63 11' 62 15' 19' 6 A " 3 B C D E F G ½ to 5 16" diameter. 57EFF% HP 1 2 HP 1 1 /2 HP m 3 hr 12
13 Performance Curves 5 Hz, 29 RPM 12 1 Model SSH / 9SH Size 1 x 2-6 RPM 29 Curve CN621R A 6 5 /8" DIA. B 6 7 /16" C 5 11 /16" 8 D 5 3 /8" ' 55 5' NPSH R 56 7' 55 EFF% A 6 5 8" 3 B C D to 1 8" diameter. 3 HP 4 1 /2 HP 2 HP Model SSH / 1SH Size 1 x 2-8 RPM 29 Curve CN615R A 8 3 /8" DIA. B 8 1 /16" C 7 5 /8" D 7 5 /16" E 7 1 /8" 5' NPSH R 7' EFF% A 8 3 8" 5 B C D E to 1 8" diameter. 5 3 HP 5 HP
14 Performance Curves 5 Hz, 29 RPM 3 Model SSH / 11SH Size 1 x 2-1 RPM 29 Curve CN618R 2 A 1 3 /32" DIA. B 9 17 /32" C 9 1 /8" D 8 3 /4" 3 8 NPSH R ' EFF% A " 15 B C D 8¾ 7½ to 1 8" diameter HP /2 HP Model SSH / 4SH Size 1 1 /2 x 2 1 /2-6 RPM 29 Curve CN49R1 A 6 3 /4" DIA. B 6 3 /8" C 6 1 /16" D 5 5 /8" E 5 5 /16" 6 F 4 11 /16" G 4 3 /8" H 4 3 /16" 4 J 3 7 /8" 4' NPSH R ' EFF% 3 HP 5 HP A 6¾" 5 B C D E F G H ½ J to 3 16" diameter. 2 1 HP 2 HP m 3 hr 14
15 Performance Curves 5 Hz, 29 RPM Model SSH / 7SH Size 1 1 /2 x 2 1 /2-8 RPM 29 Curve CN493R A 8 1 /4" DIA. B 7 13 /16" C 7" D 6 3 /4" 12 E 6 7 /16" F 6 1 /8" 39 6' NPSH R ' 17' EFF% 7 1 /2 HP 1 HP A 8¼" 1 B ½ C 7 7½ D 6¾ 7½ E F to 3 16" diameter. 2 5 HP m 3 hr 4 Model SSH / 5SH Size 2 x 2 1 /2-6 RPM 29 Curve CN496R1 A 6 7 /8" DIA. 49 5' NPSH R, B 6 7 /16" C 5 13 /16" D 5 1 /2" 8 E 5 1 /8" F 4 13 /16" 6 G 4 7 /16" H 4 1 /4" ' ' 68 14' EFF% 1 HP 7 1 /2 HP A 6 7 8" 1 B ½ C ½ D 5½ 5 E F G H 4¼ 3 to 5 32" diameter HP 5 HP m 3 hr 15
16 Performance Curves 5 Hz, 29 RPM Model SSH / 8SH Size 2 x 2 1 /2-8 RPM 29 Curve CN499R1 A 8 1 /4" DIA. 6' NPSH R B 7 3 /4" 16 C 7 1 /2" 12 F 6 3 /16" 8 D 7 3 /16" E 6 7 /8" ' 7 9' 71 13' 7 16' EFF% 15 HP 1 HP A 8¼" 15 B 7¾ 15 C 7½ 1 D E ½ F ½ to 5 32" diameter /2 HP m 3 hr Model SSH / 6SH Size 2 1 /2 x 3-6 RPM 29 Curve CN51R A 7 5 /16" DIA. 15 B 7 1 /8" C 6 15 /16" 1 D 6 11 /16" E 6 3 /8" F /16" G 5 5 /8" 6' NPSH R 58 7' ' 13' 64 17' 21' EFF% A " 15 B C D E F ½ G ½ to 5 16" diameter HP 7 1 /2 HP 15 HP m 3 hr 16
17 Performance Curves 6 Hz, 35 RPM Model SSH 24SH / Size 1 1 /2 x 2 1 /2-1 RPM 35 Curve CN53R A 9 7 /8" DIA. 4 B 9 1 /2" 35 C 9 3 /16" 3 E 8 9 /16" 2 D 8 7 /8" F 8 1 /4" 6' NPSH R 5% EFF ' 6 59 HP 2 HP 12' 55 3 HP A 9 7 8" 3 B 9½ 3 C D E F 8¼ 2 to 5 16" diameter m 3 hr E 8 3 /16" F 7 15 /16" G 7 11 /16" 2 15 Model SSH SH / Size 2 x 2 1 /2-1 RPM 35 Curve CN56R A 9 7 /8" DIA. 4 B 9 1 /2" 35 C 9 1 /8" D 8 13 /16" 7' NPSH R 55% EFF ' ' HP 2' HP 4 HP 5 HP A 9 7 8" 5 B 9½ 4 C D E F G to ½" diameter m 3 hr 17
18 Performance Curves 6 Hz, 35 RPM Model SSH 22SH / Size 2 1 /2 x 3-8 RPM 35 Curve CN59R 7' NPSH R (PIES) 4% EFF A 9 1 /16" DIA. 1' 3 B 8 3 /4" 68 C 8 1 /2" 3 D 8 1 /4" 2 E 7 7 /8" 2 F 7 1 /2" 2 G 7 1 /8" 1 H 6 11 /16" J 6 1 /2" ' 15' 68 2' ' 6 3' 5 HP 6 HP A " 6 B 8¾ 5 C 8½ 5 D 8¼ 4 E F 7½ 3 G H J 6½ 2 to 19 32" diameter HP HP 2 HP 3 HP 4 HP m 3 hr Model SSH 27SH / Size 2 1 /2 x 3-1 RPM 35 Curve CN512R ' NPSH R 45% EFF 55 6 A 1 3 /8" DIA. B 9 15 /16" C 9 9 /16" D 9 1 /4" E 8 3 /4" 1' 12' 69 4 HP 15' 7 2' 69 3' HP 1 HP A 1 3 8" 1 B C D 9¼ 6 E 8¾ 5 to 19 32" diameter. 2 6 HP HP m 3 hr 18
19 Performance Curves 6 Hz, 35 RPM ' 5% EFF 35 A 9 1 /16" DIA. 3 B 8 11 /16" Model SSH 23SH / Size 3 x 4-8 RPM 35 Curve CN515R C 8 7 /16" D 8 1 /16" E 7 11 /16" F /2" G 7 1 /8" 2 H 6 7 /8" 1 J 6 1 /2" 15 1 K 6" 1 L 5 1 2" 2 12' NPSH R 6 14' ' 77 2' ' HP ' 6 HP 5 HP 4 HP 3 HP HP 2 HP HP 12 1 HP A " B C D E F 7½ 4 G H J 6½ K 6 2 L 5½ 15 to ¾" diameter m 3 hr Model SSH 28SH / Size 3 x 4-1 RPM 35 Curve CN518R 55 NPSH R 5 45% EFF 1' C 9 13 /16" DIA. 4 D 9 7 /16" 35 E 9 1 /16" F 8 11 /16" 12' 73 14' 6 HP 17' 76 2' ' ' 1 HP C " 1 D E F to ¾" diameter. 2 HP m 3 hr 19
20 Performance Curves 6 Hz, 1 RPM Model SSH 24SH / Size 1 1 /2 x 2 1 /2-1 RPM 1 Curve CN55R A 9 7 /8" DIA. 1 B /2" C 9 3 /16" 8 D 8 7 /8" E 8 9 /16" 7 F 8 1 /4" 3' NPSH R 45% EFF ' HP 5' 5 A 9 7 8" 5 B 9½ 5 C D E F 8¼ 2 to 5 16" diameter HP m 3 hr Model SSH SH / Size 2 x 2 1 /2-1 RPM 1 Curve CN58R 11 A 9 7 /8" DIA. B 9 1 /2" 9 C 9 1 /8" 8 D 8 13 /16" E 8 3 /16" F 7 15 /16" G 7 11 /16" 4' NPSH R 5% EFF ' HP 7.5 HP A 9 7 8" 7½ B 9½ 5 C D E F G to ½" diameter HP m 3 hr 2
21 Performance Curves 6 Hz, 17 RPM Model SSH 22SH / Size 2 1 /2 x 3-8 RPM 1 Curve CN511R 8 A 9 1 /16" DIA. C 8 1 /2" 7 D 8 1 /4" 6 E 7 7 /8" 5 G 7 1 /8" 4 H 6 11 /16" 4% EFF 5 55 NPSH R 5' ' ' 55 15' 5 A " 7½ C 8½ 7½ D 8¼ 5 E G H NOTE: Pump will pass a sphere to 19 32" diameter HP 3 HP 5 HP 7 1 /2 HP m 3 hr Model SSH 27SH / Size 2 1 /2 x 3-1 RPM 1 Curve CN514R A 1 3 /8" DIA. B 9 15 /16" C 9 9 /16" D 9 1 /4" E 8 3 /4" 5% EFF 55 6 NPSH R HP 5' 68 7' 68 1' 66 15' 63 2' HP A 1 3 8" 15 B C D 9¼ 7½ E 8¾ 7½ to 19 32" diameter. 4 1 HP /2 HP m 3 hr 21
22 Performance Curves 6 Hz, 17 RPM Model SSH 23SH / Size 3 x 4-8 RPM 1 Curve CN517R 9 45% EFF 55 8 A 9 1 /16" DIA. C 8 7 /16" D 8 1 /16" F 7 1 /2" G 7 1 /8" J 6 1 /2" 5' 68 3 HP NPSH R ' 74 1' 15' HP 7 1 /2 HP 1 HP A " 1 C ½ D ½ F 7½ 5 G J 6½ 3 to ½" diameter m 3 hr Model SSH 28SH / Size 3 x 4-1 RPM 1 Curve CN52R A 1 5 /8" DIA. 11 B 1 1 /4" 1 C 9 13 /16" 9 D 9 7 /16" % EFF 55 7' NPSH R HP 74 1' 73 15' 7 2' 3' 2 HP A 1 5 8" 2 B 1¼ 15 C D to ¾" diameter HP m 3 hr 22
23 Performance Curves 5 Hz, 29 RPM 9 Model SSH 24SH / Size 1 1 /2 x 2 1 /2-1 RPM 29 Curve CN54R 3 A 9 7 /8" DIA. 3' NPSH R B 9 1 /2" C 9 3 /16" D 8 7 /8" 2 E 8 9 /16" F 8 1 /4" 15 48% EFF ' ' 53 2 HP 15 HP A 9 7 8" 2 B 9½ 15 C D E F 8¼ 1 to ½" diameter HP m 3 hr Model SSH SH / Size 2 x 2 1 /2-1 RPM 29 Curve CN57R 3 A 9 7 /8" DIA. 2 B 9 1 /2" C 9 1 /8" D 8 13 /16" E 8 3 /16" F 7 15 /16" G 7 11 /16" 6' NPSH R 53% EFF ' HP 17' 61 HP 2 HP 3 HP A 9 7 8" 3 B 9½ C D E F G to 5 16" diameter m 3 hr 23
24 Performance Curves 5 Hz, 29 RPM A 9 1 /16" DIA. B 8 3 /4" 2 D 8 1 /4" Model SSH 22SH / Size 2 1 /2 x 3-8 RPM 29 Curve CN51R C 8 1 /2" E 7 7 /8" F 7 1 /2" G 7 1 /8" H 6 11 /16" J 6 1 /2" 4% EFF 5 6' NPSH R 7' 6 1 HP ' 12' 15' 1 6 2' 5 HP 3 HP 4 HP A " 4 B 8¾ 3 C 8½ 3 D 8¼ E F 7½ 2 G H J 6½ 15 to 19 32" diameter HP 2 HP m 3 hr Model SSH 27SH / Size 2 1 /2 x 3-1 RPM 29 Curve CN513R A 1 3 /8" DIA. B 9 15 /16" C 9 9 /16" D 9 1 /4" E 8 3 /4" 45% EFF 55 NPSH R 6 6' 1' 68 HP 12' ' 2' 5 HP 4 HP A 1 3 8" 5 B C D 9¼ 3 E 8¾ 3 to 19 32" diameter. 1 3 HP m 3 hr 24
25 Performance Curves 5 Hz, 29 RPM 7 Model SSH 23SH / Size 3 x 4-8 RPM 29 Curve CN516R A 9 1 /16" DIA. 5% EFF 9' 6 1' NPSH R B 8 11 /16" C 8 7 /16" D 8 1 /16" E 7 11 /16" F 7 1 /2" G 7 1 /8" H 6 7 /8" J 6 1 /2" 7 12' ' ' 72 4 HP 7 5 HP A " 5 B C D E F 7½ G H J 6½ 15 to ½" diameter. 2 3 HP HP HP 2 HP m 3 hr 4 Model SSH 28SH / Size 3 x 4-1 RPM 29 Curve CN519R NPSH R (PIES) 5% EFF 9' 6 1' 7 C 9 13 /16" DIA. D 9 7 /16" E 9 1 /16" F 8 11 /16" 3 HP 73 12' 14' 17' 4 HP 2' 73 6 HP 5 HP C " 6 D E F to ¾" diameter m 3 hr
26 SSH Close Coupled Materials of Construction SSH Frame Mounted Materials of Construction A C 333A 412A F Item No., Description Materials F 37B Item No., Description Materials 1 Casing Wear ring 316L SS 184 Seal housing 126 Shaft sleeve 316 SS 422 stud Steel 178 key Carbon steel 199 washer 316 SS Casing bolt with nut (casing to adapter) L SS Cast iron ASTM A48 CL2 18 Adapter Hex head cap screw (adapter to motor) 371 Steel SAE 12 series 412A O-ring, 412F O-ring, shaft sleeve Viton 513 O-ring 48 Drain plug 3 8 NPT 316L SS 383 Mechanical seal See seal chart 1 Casing Wear ring 316L SS 184 Seal housing 126 Shaft sleeve 316 SS 178 key Carbon steel 422 Stud 199 washer 316 SS 37 Casing bolt with nut 316L SS 48 Drain plug 3 8 NPT 513 O-ring Viton 383 Mechanical seal See seal chart 18 Adapter 228 Bearing frame 134 Bearing cover 122 Pump shaft 168 Ball bearing (inboard) 112 Ball bearing (outboard) 382 Retaining ring Hex head cap screw (adapter to bearing frame) 37B Cast iron ASTM A48CL2 Carbon steel Steel Mechanical Seal Part No. John Crane Type 21 Mechanical Seal Item Rotary Stationary Elastomers Frames Frames Metal Parts 383 1K19 1K2 Carbon Silicon EPR 316 SS Options 1K27 1K45 Carbide Viton 1K64 1K Sil-Carb. Intended Duty Hot Water Mild Abrasive Severe Duty Hex head cap screw (bearing frame to cover) 37C 333A Lip seal BUNA-N 193 *Grease fi tting Steel 123 V-ring defl ector BUNA-N * M-Group only 26
27 SSH Engineering Data S-Group Channel Steel Bedplate, Clockwise Rotation Viewed from Drive End AB MAX. PRIME PLUG DISCHARGE X SUCTION DC DD MAX. HD Y Z CP 3½ 1.1 Ø ¾ KEYWAY 1 8 x ¼ C REF SPACER COUPLING COUPLING GUARD SINGLE PHASE ONLY P MAX. (4) HOLES 5 8 DIA. DRAIN PLUG HG HE HA HE 3 8" 19 BSP HL HF HB HP Dimensions and Weights Determined by Pump Dimension HL Determined by Pump and Bedplate Motor Frame Size Suction* Discharge* CP DC Max. DD X Y Z Wt. (lbs.) 143/ 183/ 213/ 4/ 284/ Pump SH 1 X ¾ SH 1 X SH 1 X ½ 4¾ 4SH 1½ X 2½ ½ ¾ ¼ 57 9¼ 7¾ 4 7SH 1½ X 2½ 8 5 2½ SH 2 X 2½ 6 5 4¾ ½ 4¾ 8SH 2 X 2½ ¾ SH 2½ X ½ 59 * For use with ANSI Class 15 mating fl anges. NOTES: 1. All pumps shipped in vertical discharge position. May be rotated in 9 increments. Tighten casing bolts to 12 ft./lbs. torque. 2. Dimensions in inches. 3. Motor dimensions may vary with motor manufacturer. 4. Not to be used for construction purposes. Available Motor and Bedplate Dimensions and Weights Motor 35 RPM 1 RPM Bedplate Data Frame AB P Wt. Single Phase Three Phase Single Phase Three Phase Max. C Motor Bearing REF Max. Max. Wt. (lbs.) HA HB HD** HE HF HG HP* Shim Frame Shim ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143T ¼ ¾ 145T ½ 1½ 1½ 2 1½ 2 14¼ ¾ 24 2¾ ¾ T ¾ 184T 5 5 7½ 5 3 or T 1 7½ ¼ 4¼ T T ¼ 5¼ 38½ T ¾ 284TS ½ 5¾ 4½ 3½ 124 1¾ 286TS Dimensions and weights vary with manufacturers. Dimensions in inches and weights in lbs. * HP Dimensions at motor end only. ** HD Dimension for 4T/6T motor frame on 1 x 2-1 only is 11"; A ¾" motor shim and a 1¾" bearing frame shim are required. 27
28 SSH-F Engineering Data M-Group Channel Steel Bedplate, Clockwise Rotation Viewed from Drive End CP C REF. AB MAX. DISCHARGE Y SPACER COUPLING PRIME PLUG COUPLING GUARD SINGLE PHASE ONLY SUCTION P MAX. HD DC MAX. DD KEYWAY 3/16 X 3/8 4 HOLES 5 8 DRAIN PLUG HG HE HA HE 3/8 3 GAS THREAD UNI ISO 8" 19 BSP 228/1 L HB HF Dimensions and Weights Determined by Pump, Pump Pump Size, Suction* Discharge* DD L X Y 24SH 1½ x 2½-1 1½ 1 2½ SH 2 x 2½ SH 2½ x ½ 27SH 2½ x SH 3 x SH 3 x * For use with ANSI class 15 mating fl anges. CP DC Max. Wt. (lbs.) NOTE: 1. Pumps will be shipped with top vertical discharge as standard. For other orientations, remove casing bolts, rotate discharge to desired position and tighten bolts to 12 ft./lbs. 2. ALL dimensions in inches. 3. Not for construction purposes. Available Motor and Bedplate Dimensions and Weights Motor 35 RPM 1 RPM T-Frame Only Bedplate Data Frame AB P Wt. Three Phase Single Phase Three Phase Max. C Max. Max. Wt. HA HB HD HE HF HG (lbs.) ODP TEFC ODP TEFC ODP TEFC 184T 3 or T 7½ 7½ T ½ T T TS/T TS/T ½ 5¾ 4½ 3½ TS/T TS/T 6 5 3¼ TS/T TS/T ¼ 44½ TS/T ¼ 52½ Dimensions and weights vary with manufacturers. Dimensions in inches and weights in lbs. 28
29 SSH Close Coupled Dimensions and Weights S-Group (All dimensions in inches and weights in lbs. Do not use for construction purposes.) AB MAX. DISCHARGE Y Z C REF PRIME PLUG X SUCTION P MAX. G D DC DD MAX. E A E DRAIN PLUG L 3 8" 19 BSP F B F H-(4) HOLES 15 lb. Flange DC DIM. L (Motor Frame Size) Wt. Pump Max. (lbs.) DD X Y Z Suct.* Disch.* 143/ / /215 4/6 9SH 1 x ¾ ½ 11½ 1SH 1 x SH 1 x ¾ SH 1½ x 2½ 6 5 4¾ 6 1½ 3 8 3¼ 9¾ SH 1½ x 2½ 8 5 2½ SH 2 x 2½ 6 5 4¾ ½ SH 2 x 2½ 8 5¾ SH 2½ x ½ 4¾ 27 * For use with ANSI class 15 mating fl anges. NOTE: 1. Pumps shipped in vertical discharge as standard. For other orientations, remove casing bolts, rotate discharge to desired position, and tighten bolts to 12 ft./lbs., bolts to 2 ft./lbs. 2. ALL dimensions in inches. 3. Motor dimensions may vary with motor manufacturer. 4. Not for construction purposes. Dimensions Determined by JM Motor Frame Motor Frame Selections JM Frame A AB B D E F G C REF H Dia. P Max. Motor Wt. (lbs.) 143JM 6½ 5¼ 6 3½ 2¾ ¼ JM 2½ JM 8½ ½ 4½ 3¾ 2¼ ½ JM ¾ JM 9½ ¼ 4¼ ½ JM 3½ 155 4TCZ 9½ 4 11¼ 9 6¼ ¼ ½ 6TCZ 11¾ 5 32 Motor Frame Motor Horsepower 35 RPM 1 RPM 1Ø 3Ø 1Ø 3Ø ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143JM JM ½ 1-1½ 1½-2 1½-2 182JM JM 5 5 7½ JM 7½ 1 7½ 5 7½ 7½ 215JM TCZ 2 6TCZ 2 29
30 SSH Close Coupled Dimensions and Weights M-Group (All dimensions in inches and weights in lbs. Do not use for construction purposes.) CP MAX. AB MAX. DISCHARGE Y PRIME PLUG SUCTION P MAX. G D DC MAX. DD E A E DRAIN PLUG L BSF F B F H-4 HOLES Dimensions L Determined by Pump and Motor Pump Pump Size Suction* Discharge* CP Max. DC Max. DD X Y Wt. (lbs.) Motor Frame Size SH 1½ x 2 ½-1 1½ 34½ 1½ 2½ SH 2 x 2½ SH 2½ x ½ 27SH 2½ x SH 3 x ½ SH 3 x * For use with ANSI class 15 mating fl anges. NOTES: 1. Pumps shipped in vertical discharge as standard. For other orientations, remove casing bolts, rotate discharge to desired position, and tighten bolts to 12 ft./lbs., bolts to 2 ft./lbs., ½ 13 bolts to 35 ft./lbs. 2. Motor dimensions may vary with motor manufacturer. 3. Not for construction purposes. Dimensions Determined by JM Motor Frame Motor Frame Selections Frame A AB Max. B D E F G H P Max. 145JM 6½ 5¼ 6 3½ 2¾ 2½ JM 8½ ½ 4½ 3¾ 2¼ ½ 184JM 13 2¾ JM 9½ ¼ 4¼ JM 3½ 4JM 4 11¼ 9 11¾ 6¼ ¼ 6JM 5 17 ¼ JM 12¼ 12¼ 12¼ 7 5½ 4¾ JM 5½ 324JM 14 13¼ ¼ 5¼ JM TCZ 5 17¾ ½ TCZ TCZ and 3TCZ frames are built with 326JM shaft extensions. Dimensions may vary with manufacturer. Motor Horsepower Wt. Frame 35 RPM 1 RPM Max. 3 PH 1 PH 3 PH ODP TEFC ODP TEFC ODP TEFC 145JM JM 2 2, JM JM 1 5 7½ 7½ JM JM JM JM JM JM JM TCZ 6 7 3TCZ 1, TCZ and 3TCZ frames are built with 326JM shaft extensions. 3
31 SSH Frame Mounted Dimensions and Weights S-Group DISCHARGE Y Z CP PRIME PLUG X SUCTION 3½ DIA. 5¼ DC MAX. DD KEYWAY 1 8 x ¼, CHAVETERO 1 8 x ¼ 7 16 DIA. (4) HOLES 2¾ 2¾ DRAIN PLUG L 5 ¾ ½ 7 3 8" 19 BSP 6½ Dimensions and Weights Bare Pump Only Pump 15 lb. Flange DC CP Max. DD Max. L X Y Z Suction* Discharge* Wt. (lbs.) 9SH 1 x ¾ SH 1 x SH 1 x ¾ SH 1½ x 2½ 6 5 4¾ 16 1½ ¾ ¼ 57 7SH 1½ x 2½ 8 5 2½ SH 2 x 2½ 6 5 4¾ ½ SH 2 x 2½ ¾ SH 2½ x ½ 59 NOTE: 1. Pumps will be shipped with top vertical discharge as standard. For other orientations, remove casing bolts, rotate discharge to desired position, and tighten bolts to 12 ft./lbs., bolts to 2 ft./lbs. 2. ALL dimensions in inches. 3. Not for construction purposes. * For use with ANSI class 15 mating fl anges. 31
32 SSH Frame Mounted Dimensions and Weights M-Group CP DISCHARGE Y PRIME PLUG SUCTION DIA DC MAX. DD KEYWAY 3 16X3 8 4 HOLES 9 16 DIA DRAIN PLUG L /8 BSP Dimensions and Weights Bare Pump Only Pump Pump Size Suction* Discharge* CP DC Max. DD L X Y Wt. (lbs.) 24SH 1½ x 2½-1 1½ 1 2½ SH 2 x 2½ ¼ SH 2½ x ½ SH 2½ x SH 3 x ¼ 5 28SH 3 x * For use with ANSI class 15 mating fl anges. NOTES: 1. Pumps will be shipped with top vertical discharge as standard. For other orientations, remove casing bolts, rotate discharge to desired position, replace and tighten bolts to 12 ft./lbs. 2. Motor dimensions may vary with motor manufacturer. 3. Not for construction purposes. 32
33 Specifications Capacities to: 11 GPM ( m 3 /hr) at 35 RPM 7 GPM (177 m 3 /hr) at 1 RPM Heads to: 5 feet THD (158 m) at 35 RPM 13 feet THD (4 m) at 1 RPM Maximum working pressures to: 23 PSI (15 bars) Maximum temperatures to: F (121 C) All wetted components of AISI: Type 316L stainless steel material. Rotation: Clockwise when viewed from motor end. Enclosed impeller and replaceable wear ring: for high effi ciency and maximum wear life. Motor (close coupled): NEMA standard JM shaft open drip-proof, totally enclosed and explosion-proof enclosures, 6 Hz, 1 or 35 RPM. Single phase ODP (115/23 V) 1 RPM, 1 5 HP. Three phase ODP. TEFC/Exp. proof (28 23/46 V). 35 RPM, 2 1 HP 1 RPM, 1 HP NOTE: Overload protection must be provided. Contactor with overload for single phase or starter with heaters for three phase ordered separately. Motor (frame mounted): NEMA standard T-frame open drip-proof, totally enclosed and explosion-proof (three phase only) enclosures 6 Hz, 1 or 35 RPM. Single phase (115/23 V) 1 RPM, 1 5 HP Three phase (28 23/46 V) 35 RPM, 3 1 HP 1 RPM, 1 HP NOTE: Overload protection must be provided. Contactor with overload for single phase or starter with heaters for three phase ordered separately. Optional: Rigid carbon steel bedplate, sheet metal coupling guard designed to OSHA specifi cations and T.B. WOODS type SC spacer couplings. 33
34 Typical Applications HVAC Specifi cally designed for all traditional cast iron or bronze fi tted water and low grade corrosive services. Water circulation Booster systems Liquid transfer HVAC pump replacements General service pumping Water truck PCB washer Tubing washer Textile dyes Reverse osmosis Boiler feed 34
35 Notes 35
36 ITT ITT Corporation. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. 26 ITT Corporation Engineered for life
ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
More informationTECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
More informationTECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES
Goulds Pumps GB, 7GB, 1GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
More information5GB, 7GB, 10GB, 18GB, 25GB, 33GB
B-33GB GB, 7GB, GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction: Standard
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationRepair Parts MODEL G&L Series NPE/NPE-F
Repair Parts MODEL G&L Series NPE/NPE-F 2005 ITT Water Technology, Inc. Effective June, 2005 RNPE TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...1 NPE Seal Chart (Part of Numbering
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More informationRepair Parts MODEL NPE/NPE-F
Repair Parts MODEL NPE/NPE-F 2002 G&L Effective January, 2002 RNPE TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System... NPE Seal Chart (Part of Numbering System)... Parts List...2 Optional
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationITT. Goulds Pumps. Marlow Series Trash Hog II. Engineered for life. Wastewater. Self-Priming Solids Handling Centrifugal Pumps
Goulds Pumps Marlow Series Trash Hog II Self-Priming Solids Handling Centrifugal Pumps Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life TRASH HOG II A FULL RANGE OF PRODUCT
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationSeries: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)
4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) 60 Hz Performance 60Hz - PERFORMANCE AND SELECTION CHART
More informationBulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS
ulletin D1 September 006 D1 D61 D71 D91 Series Centrifugal Pumps Capacities to 0 GPM Heads to 60 eet MTH PUMPS Casing Standard casing construction of all units is ASTM A8 Class 0 cast iron. All bronze
More informationRSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
More informationSeries: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)
4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) USA: (97) 77-947 Canada: (905) 457-622 International:
More informationSeries: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)
C A L L -866-670 -0533 O R D E R O N L INE www.burkspumpcatalog.com Series: ES 4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual
More informationNPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R1
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R1 TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...1 NPE Seal Chart (Part of Numbering System)...1 Parts List...2 Optional Components...2
More informationSERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS
420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -
More informationITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6" Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems
B65-32L ITT Residential Water Systems Goulds s 65L, 95L, 12L, 16L, 2L, 32L 6" Stainless Steel Submersible s 6 Hz High Capacity For 6" and larger wells Goulds s is a brand of ITT Corporation. www.goulds.com
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationSeries: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)
4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for fi
More informationEVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage
Model / G / L Contents Item No. Specifications Selection Performance Pump Sectional Chart Curve Dimensions View 3 5 10 18 G32 G45 G64 L3 L5 L10 L18 L32 L45 L64 803 804 803 804 805 806 807 808 809 810 811
More informationTrash Hog II Self Priming Solids Handling Centrifugal Pumps
Trash Hog II Self Priming Solids Handling Centrifugal Pumps Marlow Pumps ITT Industries Trash Hog II A Full Range of Product Features Industrial Duty Power End Provides rigid shaft support. Ample oil
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationITT SSV. Goulds Pumps. Engineered for life. Commercial Water. G&L Series Repair Parts
ITT Commercial Water Goulds Pumps SSV G&L Series epair Parts Goulds Pumps is a brand of ITT Water Technology, Inc. - a subsidiary of ITT Industries, Inc. www.goulds.com Engineered for life TABLE OF CONTENTS
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationSeries: GNA5-1-1/4, GNA6-1-1/4
1750 RPM - 60Hz. CAPACITIES TO 40 GPM (2.5 LPS) HEADS TO 0 FEET (9 m) USA: (97) 778-8947 Canada: (905) 457-622 International: (97) 615-598 1 500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 15 FEET
More informationSeries: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)
Series: G5-1¼, G6-1¼ 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3 LPS) HEADS TO 9 FEET (8 M) USA: (937) 778-8947 Canada: (905) 457-63
More informationRegenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More information2CDU70/206-2HP 2CDU70/306-3HP CDU120/306-3HP 2CDU200/506-5HP 607
Model CDX/CDU Contents CDX/CDU Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data CDXU70/06-HP CDXU70/6-HP 5 6 8 6 CDXU0/6-HP CDXU00/6-5HP 7 CDU70/06-HP
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationSeries: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)
Series: G5-1¼, G6-1¼ C A L L 1-866 -670-0533 O R D E R O N L IN E www.burkspumpcatalog.com 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 2900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3
More informationRegenerative Turbine Pumps
Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES
FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationNPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R5
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R5 TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...3 NPE Seal Chart (Part of Numbering System)...3 Parts List...4 Optional Components...4
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationVSC /VSCS Pumps Technical Brochure
VSC /VSCS Pumps Technical Brochure BX-4C VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION ASTM NO. Casing Cast iron A159 Class G0 Volute cover plate (Outboard)
More informationM50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
More informationRegenerative Turbine Pumps
Bulletin 40 October 008 40 40 80 80 Series Regenerative Turbine Pumps Capacities to 60 GPM Heads to 800 Feet MTH PUMPS 40 40 80 80 Series regenerative turbine pumps represent the most economical, high
More informationHigh Capacity Centrifugal & Sprinkler Pumps
High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to
More informationSeries. NV Vertical Multistage Booster Pump
NV Vertical Multistage Booster Pump Series This series of vertical multistage booster pumps offer technically advanced designs to meet market demands including hot water applications. Every NV Series pump
More informationTECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP
TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free
More informationITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water
Goulds Pumps Marlow Series 2EVP Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents STANDARD UNIT INCLUDES: Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationBulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationD Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006
D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation
More informationRegenerative Turbine Pumps
Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps
More informationCENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationBulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program
Bulletin BX-4C Bell & Gossett VSC /VSCS Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Program VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationGB REPAIR PARTS REPAIR PARTS RGB R2
GB REPAIR PARTS REPAIR PARTS RGB R2 GB NUMBERING SYSTEM The various versions of the Series GB are identified by a product code number on the pump label. This number is also the catalog number for the pump.
More informationEBARA Self Priming Trash Pump. Type EFQT-EFQU
Type EFQT-EFQU Contents Section Page Model Designation 2 Features 3 Selection Chart 7 Dimension Drawings 20 Technical Data 24 Sectional View 25 1 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming
More informationHIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS
HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM
More informationFlow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS " CCW " CCW
6 Hz LS EXTENSION 4" Submersible Pumps MODEL LS 5LS, 7LS, LS, LS, 8LS, 25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor
More information3340 Series Single Stage End Suction Pumps
3340 Series Single Stage End Suction Pumps Bulletin 3340/Rev. A Model 3344 Aurora 3340 Pump Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were five years
More informationSeries: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number)
4CT - 25-60Hz. CT - 450-60Hz. (See Indivdual curves for symbol number) Symbol 2 4 5 6 8 9 0 *MAXIMUM HEAD HP /2 /4 / /2 /4 / /2 /4 /4 /2 /4 Catalog - Phase - Phase 5CTM CTM CT6M 5CT6M CT6M CT5M 5CT5M 24CTM
More informationRS Multi-Stage, Ring Section Pumps
RS Multi-Stage, Ring Section Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The RS Series is Carver s multi-stage pump for fluids at moderate to high pressures. The
More informationSeries: EC & ED. EC & ED RPM - 60Hz. (See Indivdual curves for symbol number)
Series: EC & ED EC & ED - 1725 RPM - 60Hz. (See Indivdual curves for symbol number) EC & ED - 1450 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationAquaBoost. Variable Speed Constant Pressure Systems MODEL ABS
PRODUCT OVERVIEW The AquaBoost pump controller and complete booster package kits provide an economical answer for municipal water district customers with low water pressure. Both domestic and light commercial
More informationSUBMITTAL DATA WATER PRESSURE BOOSTER SYSTEMS
WATER PRESSURE BOOSTER SYSTEMS Model WPB-100-40TT APPLICATION Applications include commercial, industrial and other installations requiring a boost in water pressure. The NECO Water Pressure Booster System
More informationRegenerative Turbine Pumps
Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most
More informationRSV In-Line Vertical Multi-Stage, Ring Section Pumps
RSV In-Line Vertical Multi-Stage, Ring Section s Technical Specification Pages RSV In-Line Vertical Multi-Stage, Ring Section This page left intentionally blank. RSV In-Line Vertical Multi-Stage, Ring
More information45HB, 70HB. High Pressure Centrifugal Booster Pump MODEL. WARNING: This is a booster pump. It has no lift capability. DO NOT RUN DRY. DO NOT DEADHEAD.
High Pressure Centrifugal Booster Pump MODEL 45HB, 7HB APPLICATIONS Wide variety of industrial, commercial and agricultural uses, especially: High rise buildings Multiple dwelling buildings Reverse osmosis
More informationStainless Steel Vertical Multistage Pump CONTENTS
, EVMUG/L - V ertic ca l Multistage s D ata Book 6Hz / EVMU(G)(L) CONTENTS SECTION PAGE FEATURES 2 TYPICAL APPLICATIONS 3 MODEL DESIGNATION 4 PRODUCT SPECIFICATIONS 1 2 5 EVMU(G)(L)32 - EVMU(G)(L)64 6
More informationCENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD
More informationG&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries
G&L Series MPVN High Pressure Multi-Stage Pumps www.goulds.com Goulds Pumps ITT Industries A Full Range of Product Features Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum
More informationSeries: EC & ED. EC & ED RPM - 60Hz. (See Indivdual curves for symbol number)
Series: EC & ED EC & ED - 1725 RPM - 60Hz. (See Indivdual curves for symbol number) EC & ED - 1450 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for
More informatione-sv Technical Manual e-sv Series Vertical Multi-Stage Pumps
BESV60 e-sv Technical Manual e-sv Series Vertical Multi-Stage Pumps IT T www.goulds.com is a brand of ITT Corporation. is ISO 9001 Registered. PAGE 2 Contents Coverage Curves....4 General Market Specifications...............................................................................
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationTECHNICAL BROCHURE BeSV60 R8. e-sv. 60 Hz Technical Manual E-SV SERIES VERTICAL MULTI-STAGE PUMPS
TECHNICAL BROCHURE BeSV6 R8 e-sv 6 Hz Technical Manual E-SV SERIES VERTICAL MULTI-STAGE PUMPS PAGE 2 Contents Coverage Curves.... 4 General Market Specifications.....................................................................................
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.
More informationGB REPAIR PARTS REPAIR PARTS RGB R3
GB REPAIR PARTS REPAIR PARTS RGB R3 GB NUMBERING SYSTEM The various versions of the Series GB are identified by a product code number on the pump label. This number is also the catalog number for the pump.
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informatione-sv REPAIR PARTS REPAIR PARTS ReSV R2
e-sv REPAIR PARTS REPAIR PARTS ReSV R2 Table of Contents Numbering System for 1 22SV Liquid End Only..........................................................3 Numbering System for 33 125SV Liquid End
More information