CP-506B-PL. Series HSCS. Horizontal Split Case Pumps. Replacement Parts
|
|
- Judith Hart
- 5 years ago
- Views:
Transcription
1 Series HSCS Horizontal Split Case Pumps Replacement Parts PARTS List CP-506B-PL
2 PARTS LIST CP-505-PL Index Description Page No. Exploded View....3 Parts List for 6x10x22, 8x12x22M, 8x12x22L, 8x12x27, and 10x14x20S..4 Parts List for 10x14x20L, 12x16x23, 14x16x17, 14x18x23, and 14x18x
3 PARTS LIST CP-505-PL 3
4 PARTS LIST CP-506B-PL ITEM NO. PART DESCRIPTION QTY. MATERIAL 6x10x22 8x12x22M 8x12x22L 8x12x27 10x14x20S Casing Assembly 1 Cast Iron N/A Casing Assembly 1 Ductile Iron Impeller w/o Rings 1 Silicon Brass Impeller w/ Rings 1 Silicon Brass Casing Wear Ring 2 Bronze Impeller Wear Ring 2 Bronze Gasket, Discharge (CI Casing) 1 Vellumoid N/A Gasket, Discharge (DI Casing) 1 Vellumoid Gasket, Suction (CI Casing) 1 Vellumoid N/A Gasket, Suction (DI Casing) 1 Vellumoid Shaft 1 Steel ** Shaft Stn. Stl ** Shaft Sleeve (1) 2 Bronze Shaft Sleeve (2) 2 Bronze Gasket, Sleeve 2 Synthetic B-5180 (Non-Asbestos) Nut, Shaft Sleeve (1) 2 Bronze Nut, Shaft Sleeve (2) 2 Bronze Set Screw, Sleeve Nut Stn. Stl Impeller Key Stn. Stl Key, Coupling 1 Steel Key, Sleeve Stn. Stl O-Ring, Shaft Sleeve 2 Buna-N C02495A Anti-Rotation Pin Stn. Stl. CP Pipe Plug, 1/4" 15 Steel AC Pipe Plug, 1/2" 2 Steel H Pipe Plug, 1" 5 Steel AC Screw, Housing/Casing 8 Steel End Cover, Inboard Coupling 1 Cast Iron End Cover, Inboard Thrust 1 Cast Iron Bearing Housing 2 Cast Iron Ball Bearing, Radial 1 Steel Ball Bearing, Thrust 1 Steel Washer, Ball Bearing 1 Cast Iron Deflector 2 Rubber/Steel End Cap, Bearing Housing 1 Steel Lip Seal, Outboard 2 Rubber/Steel CP Lip Seal, Inboard 2 Rubber/Steel CP Gasket, End Cover 2 Vellumoid Locknut, Bearing 1 Steel Lockwasher, Bearing 1 Steel Screw, Housing/End Cover 4 Steel Grease Fitting, Straight Drive 2 Steel Retaining Ring, Thrust 1 Steel A06941A O-Ring, End Cap 1 Buna-N C02495A-239 MECHANICAL SEAL Flush Piping 1 Copper Washer, Gland Screw 4/8* 316 Stn. Stl Gland (CI Casing) 2 Cast Iron Gland (DI Casing) 2 Cast Iron Mechanical Seal, Std. 2 Viton/Carbon/Cer Mechanical Seal, Balanced 2 Viton/Carbon/Cer Screw, Gland 4/8* 316 Stn. Stl O-ring, gland 2 Buna-N C02495A-430 PACKING Flush Piping 1 Copper Lantern Ring 2 Teflon Gland (CI Casing) 2 Cast Iron Gland (DI Casing) 2 Cast Iron Screw, Gland 4/8* 316 Stn. Stl Washer, Gland Screw 4/8* Steel Packing Ring 10/12 Graphite Acrylic Yarn Factory Recommended Spare Parts * Qty. 8 required for Ductile Iron Casing ** 17-4 PH Condition H1150 is the standard shaft material for 8x12x PH Condition H1150 is standard shaft material for sizes 12x16x23 and 14x16x17 when speeds are greater than 1200 RPM PH Condition H1150 is stainless steel shaft material option for sizes 10x14x20L, 12x16x23 and 14x16x17. (1) Use with standard mechanical seal. (2) Use with balanced seal + Bronze Material 4
5 PARTS LIST CP-506B-PL ITEM NO. PART DESCRIPTION QTY. MATERIAL 10x14x20L 12x16x23 14x16x17 14x18x23 14x18x Casing Assembly 1 Cast Iron Casing Assembly 1 Ductile Iron Impeller w/o Rings 1 Silicon Brass Impeller w/ Rings 1 Silicon Brass Casing Wear Ring 2 Bronze Impeller Wear Ring 2 Bronze Gasket, Discharge (CI Casing) 1 Vellumoid Gasket, Discharge (DI Casing) 1 Vellumoid Gasket, Suction (CI Casing) 1 Vellumoid Gasket, Suction (DI Casing) 1 Vellumoid Shaft 1 Steel ** Shaft Stn. Stl ** Shaft Sleeve (1) 2 Bronze Shaft Sleeve (2) 2 Bronze Gasket, Sleeve 2 Synthetic B B-5180 (Non-Asbestos) Nut, Shaft Sleeve (1) 2 Bronze Nut, Shaft Sleeve (2) 2 Bronze Set Screw, Sleeve Nut Stn. Stl Impeller Key Stn. Stl Key, Coupling 1 Steel Key, Sleeve Stn. Stl O-Ring, Shaft Sleeve 2 Buna-N C024945A C02495A Anti-Rotation Pin Stn. Stl. CP Pipe Plug, 1/4" 15 Steel AC Pipe Plug, 1/2" 2 Steel H Pipe Plug, 1" 5 Steel AC Screw, Housing/Casing 8 Steel End Cover, Inboard Coupling 1 Cast Iron End Cover, Inboard Thrust 1 Cast Iron Bearing Housing 2 Cast Iron Ball Bearing, Radial 1 Steel Ball Bearing, Thrust 1 Steel Washer, Ball Bearing 1 Cast Iron Deflector 2 Rubber/Steel End Cap, Bearing Housing 1 Steel Lip Seal, Outboard 2 Rubber/Steel CP Lip Seal, Inboard 2 Rubber/Steel CP Gasket, End Cover 2 Vellumoid Locknut, Bearing 1 Steel Lockwasher, Bearing 1 Steel Screw, Housing/End Cover 4 Steel Grease Fitting, Straight Drive 2 Steel Retaining Ring, Thrust 1 Steel A06941A O-Ring, End Cap 1 Buna-N C02495A-239 MECHANICAL SEAL Flush Piping 1 Copper Washer, Gland Screw 4/8* 316 Stn. Stl Gland (CI Casing) 2 Cast Iron Gland (DI Casing) 2 Cast Iron Mechanical Seal, Std. 2 Viton/Carbon/Cer Mechanical Seal, Balanced 2 Viton/Carbon/Cer Screw, Gland 4/8* 316 Stn. Stl O-ring, gland 2 Buna-N C02495A-430 C02495A-436 PACKING Flush Piping 1 Copper Lantern Ring 2 Teflon Gland (CI Casing) 2 Cast Iron Gland (DI Casing) 2 Cast Iron Screw, Gland 4/8* 316 Stn. Stl Washer, Gland Screw 4/8* Steel Packing Ring 10/1 2 Graphite Acrylic Yarn CF CF Factory Recommended Spare Parts * Qty. 8 required for Ductile Iron Casing ** 17-4 PH Condition H1150 is the standard shaft material for 8x12x PH Condition H1150 is standard shaft material for sizes 12x16x23 and 14x16x17 when speeds are greater than 1200 RPM PH Condition H1150 is stainless steel shaft material option for sizes 10x14x20L, 12x16x23 and 14x16x17. (1) Use with standard mechanical seal. (2) Use with balanced seal + Bronze Material CF Consult Factory 5
6 Xylem 1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company. We re 12,700 people unified in a common purpose: creating innovative solutions to meet our world s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise, backed by a legacy of innovation. For more information on how Xylem can help you, go to Xylem Inc N. Austin Avenue Morton Grove, Illinois Phone: (847) Fax: (847) Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries Xylem Inc. CP-506B-PL November 2011
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL SERIES 8150 CROSS SECTION 0-952-3 0-952-4 0-952-5 2-904-2 0-952-2 0-952-1 0-952-6 2-001-0 2-916-1 2-904-1 2-123-5 0-905-0
More informationSeries e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL
Series e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL PARTS LIST CP-208G-PL SERIES e-1510 Index Nameplate Data.................................................. Exploded Views...................................................
More informationPARTS LIST CP-210-PL. Series e Close Coupled Centrifugal Pumps. Replacement Parts
Series e-1535 Close Coupled Centrifugal Pumps Replacement Parts PARTS LIST CP-210-PL PARTS LIST CP-210PL SERIES e-1535 Index How to use this Parts List Page 3 e-1535 Pump Exploded View Page 4 Replacement
More informationA-C Fire Pump. Fitting and Accessories A-C 100A
A-C Fire Pump Fitting and Accessories A-C 100A A-C Fire Pump Fitting and Accessories Table of Content Page Automatic Air Release Valve... 1 Suction And Discharge Gauge Assembly... 2 Casing Relief Valve...
More informationG&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS
TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump
More informationMarlow Series Prime Line
REPAIR PARTS RPRIMELINE Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS REPAIR PARTS Prime Line M2P M4P Pumps 27 50 49 27 54 1 8 10 6 17 4 67 5 24 37 63 53 51 2 7 46 2 PAGE 2 Prime Line 2" Pump
More informationSeries e-60. In-Line Mounted Centrifugal Pumps Maintenance Free Replacement Parts PARTS LIST CP-107-PL
Series e-60 In-Line Mounted Centrifugal Pumps Maintenance Free Replacement Parts PARTS LIST CP-107-PL Index How to Use This Parts List... 3 Exploded View Series e-60 Maintenance Free Pump... 4 Standard
More informationREPAIR PARTS R36/3756 R /3756 S, M & L-Group REPAIR PARTS
REPAIR PARTS R6/756 R1 656/756 S, M & L-Group REPAIR PARTS PUMP END PARTS FOR CLOSE-COUPLED OR FRAME MOUNTED CONFIGURATION 656/756 S-Group Note: For S-Group power frame individual parts see S-Group Power
More informationTECHNICAL BROCHURE BAC2000. Series 2000 Closed Coupled. Series 2000 Frame Mounted. Series A-C 2000 SINGLE STAGE END SUCTION
TECHNICAL BROCHURE BAC0 Series 0 Closed Coupled Series 0 Frame Mounted Series A-C 0 SINGLE STAGE END SUCTION Series A-C 0 End Suction Close Coupled - Model 0 APPLICATIONS General Industry Water Supply
More informationPART LISTS D-421G-PL. Domestic Pump. Series B35 REPLACEMENT PARTS FOR. 2 ft. NPSH Centrifugal Pumps Styles PF and PVF and HB-35
PART LISTS D-21G-PL Domestic Pump Series B35 REPLACEMENT PARTS FOR 2 ft. NPSH Centrifugal Pumps Styles PF and PVF and HB-35 Index How To Use This Parts List........................................... 3
More informationBulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
More informationTECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
More informationTECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
More informationSeries HSC-S Pumps Technical Brochure
Series HSCS Pumps Technical Brochure BX512L Table of Contents Useful Pump Formulas 2 60 Cycle Performance Curves Series HSCS 3 50 Cycle Performance Curves Series HSCS 4 Series HSCS Materials of Construction
More informationGB REPAIR PARTS REPAIR PARTS RGB R3
GB REPAIR PARTS REPAIR PARTS RGB R3 GB NUMBERING SYSTEM The various versions of the Series GB are identified by a product code number on the pump label. This number is also the catalog number for the pump.
More informationTECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP
TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free
More informationGB REPAIR PARTS REPAIR PARTS RGB R2
GB REPAIR PARTS REPAIR PARTS RGB R2 GB NUMBERING SYSTEM The various versions of the Series GB are identified by a product code number on the pump label. This number is also the catalog number for the pump.
More informationDomestic. Pump Series CS Condensate Units SINGLE OR DUPLEX 1,000 THRU 150,000 SQ. FT. EDR-250 THRU 37,500 LB./HR.
Steel Receivers: Durable, Lightweight in sizes to 250 gallon (946L) Centrifugal Pumps: Provide generous running clearances. Standard 500 RPM for best hydraulic efficiencies, optional 750 RPM Float Switches:
More informationVolute Casing Pumps LSN. according to iso 2828 / ISO 5199
Volute Casing Pumps LSN according to iso 2828 / ISO 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More informationCURVES B-194. Series e-60 MAINTENANCE FREE IN-LINE MOUNTED CENTRIFUGAL PUMPS PERFORMANCE CURVES
CURVES B-194 MAINTENANCE FREE IN-LINE MOUNTED CENTRIFUGAL PUMPS PERFORMANCE CURVES TABLE OF CONTENTS Useful Pump Formulas..................................................................... 2 Stock Pump
More information(.LOWARA. a xylem brand
(.LOWARA a xylem brand New Z6, your 6 11 Stainless Steel Pump ncreased Life Cycle Cost - lower energy consumption No water contamination - No paint, no rust High sand handling capability 100 g/m 3 High
More informationBell & Gossett Parts List CP-302F-PL. Replacement Parts for Series 1522 Uni-Built Centrifugal Pumps
Bell & Gossett Parts List CP-302F-PL Replacement Parts for Series 1522 Uni-Built Centrifugal Pumps SERIES 1522 2 3 4 5 Standard Size Designations ITEM NO. 6 6 8 5 PUMP PART NUMBER BUILT-TO-ORDER EQUIVALENT
More informationREPAIR PARTS RJETPARTS R1. Jet Pump REPAIR PARTS
REPAIR PARTS RJETPARTS R1 Jet Pump REPAIR PARTS JETS JRS... 3 JRD... 4 JRSG... moved to obsolete book J+ and JS+... 5 JB... moved to obsolete book HSJ... 6 VJ... 7 SJ... GT Irri-Gator... 9 BF03S...10 The
More informationNPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R1
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R1 TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...1 NPE Seal Chart (Part of Numbering System)...1 Parts List...2 Optional Components...2
More informationHoffman Specialty Service Parts Catalog PARTS LIST HS-800C
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Table of Contents STEAM TRAPS FLOAT AND THERMOSTATIC SERIES PAGE INVERTED BUCKET SERIES PAGE C 6 B0 H B I B X 6 B 6 8 B 6 0
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST
Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)
More informationTECHNICAL BROCHURE BCP3PH R9. Three Phase 4" Motors, ½-10 HP 60 HERTZ, 3450 RPM
TECHNICAL BROCHURE BCP3PH R9 Three Phase 4" Motors, ½-10 HP 60 HERTZ, 3450 RPM FEATURES 304 SS casing and end bells for corrosion resistance Kingsbury type, 3 shoe, thrust bearing, see chart for ratings
More information6" Single Phase Motors 6-10" Three Phase Motors
TECHNICAL BROCHURE BCP6-10MTR R2 FEATURES SINGLE PHASE: Single Phase, 6 motors available in 5 15 HP, 230 volt models. Require Control Boxes as shown on Order Number chart. THREE PHASE: Three Phase, 6,
More informatione-sv REPAIR PARTS REPAIR PARTS ReSV R2
e-sv REPAIR PARTS REPAIR PARTS ReSV R2 Table of Contents Numbering System for 1 22SV Liquid End Only..........................................................3 Numbering System for 33 125SV Liquid End
More information33GS, 40GS, 55GS, 60GS, 75GS & 80GS GPM, 1 10 HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B33-8GS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More informationSeries 1510 Centrifugal Pumps
Series 1 Centrifugal Pumps B-207H Table of Contents Useful Pump Formulas... 2 Standard Features... 3 Technical Data... Materials of Construction... Selection Charts... 6 Performance Curves... 7 Centrifugal
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More informationNPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R5
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R5 TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...3 NPE Seal Chart (Part of Numbering System)...3 Parts List...4 Optional Components...4
More informationEndsuction Pumps. Vogel Series LS, LC, LCP
Endsuction Pumps Vogel Series LS, LC, LCP Design LS Technical Data Performance Range: m Capacity up to 4600m 3 /h (20.250 USgpm) m Head up to 170m (560 feet) m Speed up to 1750 rpm Sizes: m DN 125 up to
More informationPure performance STEADY 1300 SERIES
Pure performance STEADY 1300 SERIES Available EASY TO SELECT, QUICK DELIVERY, THE RIGHT PUMP FOR YOUR NEEDS Oustanding Value EFFICIENT, POWERFUL Reliable SOLIDS HANDLING, CONTINUOUS RUNNING 2 Readily available
More informationPure Performance FLYGT 1300 SERIES
Pure Performance FLYGT 1300 SERIES Available EASY TO SELECT, QUICK DELIVERY, THE RIGHT PUMP FOR YOUR NEEDS Oustanding Value EFFICIENT, POWERFUL Reliable SOLIDS HANDLING, CONTINUOUS RUNNING 2 Readily available
More informationMcDonnell & Miller Service Parts Catalog PARTS LIST MM-701D
McDonnell & Miller Service Parts Catalog PARTS LIST MM-70D Table of Contents Table of Contents Table of Contents 3 4 For Repl. Probe Part Weight Model Model No. Number Description lbs. (kg) PS-80-0 PA-800
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationDI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
More informationTECHNICAL BROCHURE BC3WIRE-G2 R4
FEATURES 304 SS casing and end bells for corrosion resistance 304 SS casing and end bells for corrosion resistance Kingsbury type, 3 shoe, thrust bearing, see chart for ratings. Stainless steel, 17-4 PH
More informationVSC /VSCS Pumps Technical Brochure
VSC /VSCS Pumps Technical Brochure BX-4C VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION ASTM NO. Casing Cast iron A159 Class G0 Volute cover plate (Outboard)
More informationBlockpumps. Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858
Blockpumps Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858 Technical Data Performance: Capacity up to 450m 3 /h (1540USgpm) Head up to 150m (280feet) Speed up to 2950/3550rpm Pump Sizes: DN 25 up
More informationAxially Split Case Pumps
Axially Split Case Pumps A-C Pump A-C SPL Standard Design Features for a Wide Range of Heavy Duty In STUFFING BOX Packing is standard on the A-C products. A wide variety of mechanical seals, including
More informationTECHNICAL BROCHURE BHSJ. Basic Convertible Pump HSJ MULTI-STAGE CONVERTIBLE JET PUMPS - 60 HZ
TECHNICAL BROCHURE BHSJ Basic Convertible Pump HSJ MULTI-STAGE CONVERTIBLE JET PUMPS - 60 HZ FEATURES High Capacity and Pressure: Specifically designed to deliver high capacities at greater pressures.
More informationTECHNICAL BROCHURE BMPVN MPVN HIGH PRESSURE MULTI-STAGE PUMPS
TECHNICAL BROCHURE BMPVN MPVN HIGH PRESSURE MULTI-STAGE PUMPS A FULL RANGE OF PRODUCT FEATURES Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum speed up to RPM Sizes: From "
More informationGoulds Double Suction Pumps
Double uction Pumps Designing and Manufacturing Dependable Centrifugal Pumps for Over 125 Years. Model 3498 pumping drinking water through a distribution network in the Western United tates. All 316 stainless
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationMarlow Series Cast Iron Swimming Pool Pumps
INSTRUCTION MANUAL SECTION 360A AC1683 REVISION C INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER'S USE. Marlow Series Cast Iron Swimming Pool Pumps 3B28EC 3B32EC PLEASE FILL IN DATA FROM YOUR PUMP NAMEPLATE
More informationDI DI PUMP PARTS PRICE LIST
ITEM 1 2 2A 5050 Pump Body, 2" NPT Mech. Seal 1 40091 1 5050 Pump Body, 2" 150# RF Flg. Mech. Seal 1 40791 1 5050 Pump Body, 2" NPT, Packing 1 40088 1 5050 Pump Body, 2" 150# RF Flg., Packing 1 40793 1
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationFlygt Parts List
Flygt 2870.80 Parts List Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data plate...3 2.3 Product
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationCRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38
CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 1 ease of installation & maintenance Install like a valve Mount in the pipeline Support on pipe or foundation... Save space - save time
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationFlygt Parts List
Flygt 260.7 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification of
More informationFlygt Parts List
Flygt 2670.80 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification
More informationModel 3196 STi Size 1x1.5-6 OUTLINE DRAWING. Weights and Measurements. Pump Specification. Notes and References. Motor Specification
OUTLINE DRAWING Pump Specification SUCT.FLANGE SIZE 1.5'' DRILLING ANSI 150# FACING FF FINISH SERRATED DISCH.FLANGE SIZE 1'' DRILLING ANSI 150# FACING FF FINISH SERRATED PUMP ROTATION ( LOOKING AT PUMP
More informationAquavar ABII TECHNICAL BROCHURE BAQUABII R2 VARIABLE SPEED CONSTANT PRESSURE SYSTEMS
TECHNICAL BROCHURE BAQUABII R2 * Available up to 1 GPM systems Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS 1 and 2 HP, 1AB2 and 2AB2 Variable Speed Controllers 1AB2 and 2AB2 Prewired Pump/Controller
More informationMultistage Pumps. Vogel Series P, PVa, MP 300
Multistage Pumps Vogel Series P, PVa, MP 300 Technical Data Performance range: m Capacities up to 1800m 3 /h (8800USgpm) m Head up to 300m (1000feet) m Max. speed up to 1750rpm Multistage pumps of series
More informationThe ResiBoost allows a constant set pressure regardless of demand for maximum comfort. Energy savings are the result of the precise speed control.
ResiBoost RESIBOOST IS A VARIABLE FREQUENCY DRIVE FOR CONSTANT PRESSURE SYSTEMS. RESIBOOST AUTOMATICALLY CONTROLS THE SPEED OF THE PUMP WHILE KEEPING THE PRESSURE IN THE SYSTEM CONSTANT The ResiBoost allows
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationL6W - L8W - L10W - L12W Series LOWARA REWINDABLE MOTORS
L6W - L8W - L10W - L12W Series LOWARA REWINDABLE MOTORS Lowara Rewindable Motors Diameters 6 to 12 L6W-L8W-L10W-L12W The choice of materials and the robust design ensures optimum operating performance,
More informationITT. AC Series 8300 Split Case Pumps. A-C Pump. Commercial Water. A-C Pump is a brand of ITT Corporation. Engineered for life
AC Series 83 Split Case Pumps is a brand of ITT Corporation. Engineered for life Engineering Specification for AC Series 83 base mounted double suction pumps Double Suction, Horizontal Split Case Pumps
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More information50 HZ. Ready DURABLE, LIGHTWEIGHT AND EASILY SERVICEABLE SUBERSIBLE SUBMERSIBLE PUMPS.
50 HZ Ready DURABLE, LIGHTWEIGHT AND EASILY SERVICEABLE SUBERSIBLE SUBMERSIBLE PUMPS. Multipurpose. Multiple use. Made for the duration. Whether it s for construction or industrial sites, manholes or emergency
More informationCENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationBell & Gossett Parts List CP-106F-PL. Replacement Parts for. Series 60 Maintenance Free In-Line Mounted Centrifugal Pumps
Bell & Gossett Parts List CP-106F-PL Replacement Parts for Series 60 Maintenance Free In-Line Mounted Centrifugal Pumps SERIES 60 How to use this PARTS LIST The pump nameplate identifies the pump by model
More informationAURORA MODEL 410 SERIES ENGINEERING DATA MECHANICAL SEALS AND PACKING
AURORA MODEL 410 SERIES MECHANICAL SEALS AND PACKING Section 410 Page 71 Supersedes Section 410 Page 71 1 PACKING WITH OPTIONAL LANTERN RING SINGLE INSIDE UNBALANCED 3 SINGLE INSIDE BALANCED TAP OPTIONALLY
More informationFlygt 3153, 50Hz. Technical Specification
Flygt 3153, 5Hz Technical Specification Table of Contents Table of Contents F-pump, Standard Motor... Product description... Motor rating and performance curves...4 F-pump, Premium Efficiency Motor (IE3)...
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationFlygt 2600 sludge pump series. Maximize uptime with versatile submersible pumps
Flygt 26 sludge pump series Maximize uptime with versatile submersible pumps Introduction Moving sludge and other liquids calls for versatility Construction/Tunneling Site drainage with solids handling
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationBulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program
Bulletin BX-4C Bell & Gossett VSC /VSCS Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Program VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION
More informationReplacement Parts List FI 4007 & FI 4007D. SUPERSEDES: NEW EFFECTIVE: December 31, 2018
Replacement Parts List 304-572 FI 4007 & FI 4007D SUPERSEDES: NEW EFFECTIVE: December 31, 2018 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE FI 4007 BEARING FRAME J FI 4007D BEARING
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationGEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
More informationEAN PUMP SERIES DL200/DL230
A Met-Pro Fluid Handling Technologies Business Combining the Resources of Dean Pump, Fybroc & Sethco DEAN PUMP SERIES DL200/DL230 Inline Centrifugal Process Pumps D A T A P A K Section DL200/DL230 SERIES
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationB/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
More informationAquaBoost Packaged Systems
Constant Pressure. Plain and Simple. AquaBoost Packaged Systems BUILT WITH THE QUALITY YOU VE COME TO EXPECT FROM GOULDS WATER TECHNOLOGY BRAQBST AQUABOOST P U M P S T A T I O N S AquaBoost Pump Stations
More informationMultistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125
Multistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125 Technical Data Performance range: Capacities up to Head up to Max. speed up to 340m3/h 500m 3600min-1 (1500USgpm) (1640feet) (3600rpm) Multistage
More informationFlygt /180/280/290. Parts List
Flygt 3201.091/180/280/290 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES
FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationGS Series. with new controller SM30
GS Series Sensorpress Booster Systems with new controller SM30 GS Series The GS range of fixed speed booster setsincludes models with 2 to 3 electric service pumps, and an additional jockey pump able to
More informationFlygt low-speed mixers. outstanding efficiency
Flygt low-speed mixers outstanding efficiency Introduction Energy-efficient mixing Advantages of Flygt low-speed mixers Rising to the mixing challenge All mixing applications require varying degrees of
More informationTOUGH SIMPLE GEAR PUMPS COST EFFECTIVE TOUGH SIMPLE COST EFFECTIVE. Tel: / Int'l: Fax: / Int'l:
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
More informationINSTRUCTION MANUAL P81630 INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER S USE. Series VSC and VSCS Base Mounted Centrifugal Pumps
INSTRUCTION MANUAL P81630 Revision E INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER S USE. Series VSC and VSCS Base Mounted Centrifugal Pumps (TO BE USED IN CONJUNCTION WITH VSC PARTS LIST CONTAINING
More informationGEAR PUMPS TOUGH INTERNAL GEAR SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE
TOUGH INTERNAL GEAR GEAR PUMPS SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products,
More informationDischarge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
More information