Flygt /180/280/290. Parts List

Transcription

1 Flygt /180/280/290 Parts List

2

3 Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification of personnel...2 Dimensional accuracy inspection...2 Product Description...3 The data plate...3 Approvals...4 Product approvals for hazardous locations...4 EN approval plate...4 IEC approval plate...4 FM approval plate...5 Product denomination...5 Drive Unit...7 Standard...7 Standard...8 Explosion-proof...9 Explosion-proof...10 List of parts...11 Hydraulic Unit...20 C_ LT...20 C_ MT...21 C_ MT...22 C_ HT...23 C_ HT...24 C_ HT...25 C_ SH...27 H_ HT-HD...28 LL...29 List of parts...30 Installation Components...34 CP...34 CP...36 CS...37 CS...38 CS/HS...39 CT...40 CZ...42 LL...43 List of parts...44 Service Parts...47 List of parts...47 Flygt /180/280/290 Parts List 1

4 Introduction Introduction Purpose of this manual The purpose of this manual is to provide necessary information on spare parts and accessories order. Disclaimer Always use genuine Flygt parts. The use of other spare parts or accessories can invalidate any claims for warranty or compensation. Xylem does not take any responsibility for damages caused by the use of non-original parts. For more information, contact your Xylem representative. Data for ordering spare parts The following information is needed for spare part orders: Serial number of the product Part number Quantity (* specify piece goods) Specially approved products Qualification of personnel Dimensional accuracy inspection Only Xylem or Xylem-authorised service personnel may undertake repair work on Exapproved products. Spare parts marked with (EX) after the part number are subject to dimensional accuracy inspection. 2 Flygt /180/280/290 Parts List

5 Product Description Product Description The data plate The data plate is a metal label located on the main body of the products. The data plate lists key product specifications. Specially approved products also have an approval plate Curve code/propeller code 2. Serial number, see Product denomination (page 5) 3. Product number 4. Country of origin 5. Additional information 6. Phase; type of current; frequency 7. Rated voltage 8. Thermal protection 9. Thermal class 10. Rated shaft power 11. International standard 12. Degree of protection 13. Rated current 14. Rated speed 15. Maximum submergence 16. Direction of rotation: L=left, R=right 17. Duty class 18. Duty factor 19. Product weight 20. Locked rotor code letter 21. Power factor 22. Maximum ambient temperature 23. Read installation manual 24. Notified body. Only for EN-approved Ex-products Figure 1: The data plate WS006257A Flygt /180/280/290 Parts List 3

6 Product Description Approvals Product approvals for hazardous locations Pump Approval European Norm (EN) ATEX Directive EN , EN , EN I M2 Ex d I II 2 G Ex d IIB T4 EN approval for cable entry: Certificate number: INERIS 02ATEX9008 U II 2 G Ex d IIC or I M2 Ex d I IEC IECEx scheme IEC , IEC Ex d I Ex d IIB T4 Factory Mutural (FM) Class I. Div 1. Group C and D Dust ignition proof for use in Class II. Div 1. Group E, F and G Suitable for use in Class III. Div 1. Hazardous Locations EN approval plate This illustration describes the EN approval plate and the information contained in its fields WS003972A 1. Approval 2. Approval authority + approval number 3. Approval for Class I 4. Approved drive unit 5. Stall time 6. Starting current/rated current 7. Duty class 8. Duty factor 9. Input power 10. Rated speed 11. Controller 12. Additional information 13. Maximum ambient temperature 14. Serial number 15. ATEX marking IEC approval plate This illustration describes the IEC approval plate and the information contained in its fields. International Norm; not for EU member countries. 4 Flygt /180/280/290 Parts List

7 Product Description WS001279B 1. Approval 2. Approval authority + approval number 3. Approved for drive unit 4. Stall time 5. Starting current/rated current 6. Duty class 7. Duty factor 8. Input power 9. Rated speed 10. Controller 11. Additional information 12. Max. ambient temperature 13. Serial number FM approval plate This illustration describes the FM approval plate and the information contained in its fields Temperature class 2. Maximum ambient temperature 2 WS003973A Product denomination Sales denomination Product code The sales denomination consists of the four-digit sales code and two letters that indicate the hydraulic end and type of installation. This is an example of a sales denomination, and an explanation of its parts. NP WS006265A 1. Hydraulic part 2. Installation type 3. Sales code The product code consists of nine characters divided into two parts. This is an example of a product code, and an explanation of its parts. NP WS006262A 1. Sales denomination 2. Version Flygt /180/280/290 Parts List 5

8 Product Description Serial number The serial number is used for identification of an individual product, and is divided into four parts. This is an example of a serial number, and an explanation of its parts. NP Product code 2. Production year 3. Production cycle 4. Running number WS006269A 6 Flygt /180/280/290 Parts List

9 Drive Unit Drive Unit Standard Flygt /180/280/290 Parts List 7

10 Drive Unit Standard Flygt /180/280/290 Parts List

11 Drive Unit Explosion-proof Flygt /180/280/290 Parts List 9

12 Explosion-proof Drive Unit 10 Flygt /180/280/290 Parts List

13 Drive Unit List of parts Pos. No Part. No Denomination Qty/Version Lifting handle compl Lifting handle compl Hex.socket hd screw M16X50-A Hex.socket hd screw M16X50-A Hexagon head screw M16X50-A Sleeve Disc spring B-40X20.4X1.5-1 SPRING ST Disc spring B-40X20.4X1.5-1 SS Cable tie 200X Cable tie 200X2.4 PA 6/ Instruction plate Data plate USE AS SPARE PART Certificate plate EX Certificate plate IECEX PLATE Certificate plate FM Plate HOT WATER PRODUCT Connection plate Scotch paper tape no Connection plate (FLS+CLS) Connection plate (FLS) Connection plate (CLS) Connection plate Caution plate Connection plate SCREENED CABLE Connection plate 7-lead cable end Connection plate Scotch paper tape no Connection plate Glans coate permanent adhesive Connection plate T1T Drive screw 4X5-A2-70 4X5-A Drive screw 4X5-A Earthing screw Earthing plate Earthing plate Control cable subcab 2X1.5 OD = MM Motor cable entr.uni 1 * Flygt /180/280/290 Parts List 11

14 Drive Unit Pos. No Part. No Denomination Qty/Version Entrance flange Entrance flange For metal hose Marking tape 8129 HIGH TACK/ Slotted head screw Intended for Hexagon nut Intended for Hexagon head screw M8X20-A Hex.socket hd screw M8X20-A Cable clamp PA 12, MM Plain washer (12)-14 MM Plain washer 12.5X35X2-A Seal sleeve (10)-12MM O-ring 32.2X3 FPM Motor cable subcab SUBCAB S3X16+3X16/3+4X Motor cable silicone 4G10 OD = MM Motor cable subcab 4G10 MM2 OD= MM Motor cable subcab 4G16 MM2 OD=26-28MM Motor cable subcab SUBCAB4G25 MM Motor cable subcab SUBCAB4G35 MM Motor cable subcab 4G6+2X1.5 MM2 OD=23-25 MM Motor cable subcab 4G10+2X1.5 MM2 OD=26-28MM Motor cable subcab 4G16+2X1.5 MM2 OD=26-28MM Motor cable subcab SUBC750RN 4G25+2X Motor cable subcab SUBCAB4G35+2X1.5 MM Motor cable subcab 7G4+2X1.5 MM2 OD=22-26 MM Motor cable subcab 7G6+2X1.5 MM2 OD=24-28 MM Motor cable hcr 7X6 OD = MM Motor cable 6AWG/3-2-1-GC OD=30-32 MM Max 70 C (158 F)(29) -32 mm * * Max 90 C (194 F)(19) -20 mm * * Max 70 C (158 F)(23.5) mm * * * Max 70 C (158 F)(26) -28 mm * Max 70 C (158 F)(32.5) mm * * Max 70 C (158 F)(36.5) mm * Max 70 C (158 F)(23) -25 mm * Max 70 C (158 F)(26) -28 mm * * * * Max 70 C (158 F)(26) -28 mm * * * * Max 70 C (158 F)(32.5) mm * * * Max 70 C (158 F)(36.5) mm * Max 70 C (158 F)(22) -26 mm * * Max 70 C (158 F)(24.3) mm * * * * Max 90 C (194 F)(16.2) mm * Max 70 C (158 F)(30) -32 mm * * * * Motor cable 4AWG/3-2-1-GC Max 70 C (158 F)(32.8) mm * 12 Flygt /180/280/290 Parts List

15 Pos. No Part. No Denomination Motor cable 1AWG/3-2-1-GC MM Qty/Version Max 70 C (158 F)(40.7) mm * Entrance flange EN-APPROVED. /4" For metal hose Motor cable entr.uni Option (EX) Entrance flange SS For metal hose ISO -G/4" (EX) Entrance flange (14) - 35mm (EX) Entrance flange (14) - 35mm Cover Hex.socket hd screw M12X30-A Hex.socket hd screw M12X30-A O-ring 49.5X3 NBR O-ring 49.5X3 FPM Entrance cover EN,FM EN, FM Appr (EX) Entrance cover EN EN Appr (EX) Entrance cover With two holes for motorcable.cls/fls, alarm unit. Aux.cable OD (10)-12mm Entrance cover Without hole for aux.cable Entrance cover Without hole for aux. but with one hole for motorcable Entrance cover With one hole for motorcable Entrance cover For aux.cable and motorcable Entrance cover With two holes for motorcable.cls/fls alarm unit (EX) Entrance cover For motorcable. Cable entry with/ without metal hose Entrance cover Only one hole for motorcable. CLS/FLS alarm unit O-ring 199.3X5.7 NBR O-ring 199.3X5.7 FPM Hex.socket hd screw M12X30-A Hex.socket hd screw M12X30-A Connection housing (EX) Connection housing Connection housing (EX) Connection housing O-ring 279.3X5.7 NBR O-ring 279.3X5.7 FPM Hex.socket hd screw M12X40-A Hex.socket hd screw M12X40-A Bracket Drive Unit Flygt /180/280/290 Parts List 13

16 Drive Unit Pos. No Part. No Denomination Qty/Version Bracket Square washer Con.term.board unit O-ring 139.5X3 NBR O-ring 49.2X5.7 FPM Hexagon head screw M8X20-A Hexagon head screw M8X25-A Plain washer 8-A2-A End sleeve 35 MM2; L=18 MM End sleeve 2.5 MM2; L=7 MM End sleeve 4MM2; L=10MM End sleeve 6 MM2; L=10 MM End sleeve 25 MM2; L=15 MM End sleeve 10 MM2; L=12 MM End sleeve 0.75 MM2; L=6 MM End sleeve 1.5 MM2; L=7 MM End sleeve 16 MM2; L=12 MM End sleeve 25MM2; L=30MM Butt connector AMP mm2; L=20mm Closed end splice 3-6(AWG 12-10) L= Insulating hose D 16 * * * * Insulating hose (18-22MM) * 1 * * Insulating hose DIAM.22; TEMP.CLASS F155 * * * Hexagon head screw M8X20-A Earthing plate Insulating plate Cover Roller bearing ECP(40X90X23) Upper bearing Retaining ring SGH Protective washer (EX) Stator housing Stator housing (EX) Stator housing (EX) Stator housing Hex.socket hd screw M12X40-A Hex.socket hd screw M12X40-A O-ring 279.3X5.7 NBR 14 Flygt /180/280/290 Parts List

17 Pos. No Part. No Denomination Qty/Version O-ring 279.3X5.7 FPM (EX) Shaft unit For motor (EX) Shaft unit For motor (EX) Shaft unit For motor (EX) Shaft unit For motor (EX) Shaft unit For motor (EX) Shaft unit For motor (EX) Shaft unit For motor (EX) Shaft unit For motor (EX) Shaft unit For motor (EX) Stator a 3-phase, 50 Hz, 400V Y/230V D (EX) Stator a 3-phase, 50 Hz, V D. 3-phase, 60 Hz, 380V Y / V D (EX) Stator a 3-phase, 60 Hz, 380V D (EX) Stator a 3-phase, 50 Hz, 380V Y/220V D. 3- phase, 60 Hz, V Y / 260V D (EX) Stator a 3-phase, 60 Hz, VY SER / VY // (EX) Stator a 3-phase, 50 Hz, 660V Y - 380V D. 3- phase, 60 Hz, V D (EX) Stator a 3-phase, 50 Hz, 690V Y - 400V D (EX) Stator a 3-phase, 50 Hz, 400V D. 3-phase, 60 Hz, 400V D (EX) Stator a 3-phase, 50 Hz, V D. 3-phase, 60 Hz, 480V D (EX) Stator a 3-phase, 50 Hz, 500V D. 3-phase, 60 Hz, 575V D (EX) Stator a 3-phase, 60 Hz, V D (EX) Stator a 3-phase, 50 Hz, 690V D (EX) Stator a 3-phase, 50 Hz, 400V Y / 230V D (EX) Stator a 3-phase, 50 Hz, V D. 3-phase, 60 Hz, 380V Y / V D (EX) Stator a 3-phase, 60 Hz, 380V D (EX) Stator a 3-phase, 50 Hz, 380V Y / 220V D. 3- phase, 60 Hz, V Y / 260V D (EX) Stator a 3-phase, 60 Hz, Y SER / Y// (EX) Stator a 3-phase, 50 Hz, 660V Y / 380V D. 3- phase, 60 Hz, V D (EX) Stator a 3-phase, 50 Hz, 690V Y / 400V D (EX) Stator a 3-phase, 50 Hz, 400V D. 3-phase, 60 Hz, 440V D. 1 Drive Unit Flygt /180/280/290 Parts List 15

18 Drive Unit Pos. No Part. No Denomination (EX) Stator a 3-phase, 50 Hz, V D. 3-phase, 60 Hz, 480V D (EX) Stator a 3-phase, 50 Hz, 500V D. 3-phase, 60 Hz, 575V D. Qty/Version (EX) Stator a 3-phase, 60 Hz, V D Stator a 3-phase, 60 Hz, V Y Stator a 3-phase, 60 Hz, 380V Y V D Stator a 3-phase, 60 Hz, 380V D Stator a 3-phase, 60 Hz, VY SER / VY// Stator a 3-phase, 60 Hz, V D Stator a 3-phase, 60 Hz, V D (EX) Stator f 3-phase, 50 Hz, V Y / V D Stator f 3-phase, 50 Hz, V Y / V D (EX) Stator f 3-phase, 50 Hz, 400V D (EX) Stator f 3-phase, 50 Hz, V D (EX) Stator f 3-phase, 50 Hz, 500V D (EX) Stator a 3-phase, 60 Hz, V D (EX) Stator a 3-phase, 60 Hz, 380V D (EX) Stator a 3-phase, 60 Hz, VY SER / VY // (EX) Stator a 3-phase, 60 Hz, V D (EX) Stator a 3-phase, 60 Hz, V D Stator f 3-phase, 50 Hz, V D. With thermistor Stator a 3-phase, 50 Hz, V D. With thermistor Stator a 3-phase, 50 Hz, V D. With thermistor Stator a 3-phase, 50 Hz, 400V Y - 230V D Stator a 3-phase, 50 Hz, 380V Y / 220V D Stator a 3-phase, 50 Hz, 660V Y / 380V D Stator a 3-phase, 50 Hz, 690V Y / 400V D Stator a 3-phase, 50 Hz, V D Stator a 3-phase, 50 Hz, 500V D Stator a 3-phase, 50 Hz, V D. With thermistor Protective disc Ring For 2-pole motors Outer casing PAINTED 1 16 Flygt /180/280/290 Parts List

19 Drive Unit Pos. No Part. No Denomination Qty/Version Outer casing O-ring 339.3X5.7 NBR O-ring 339.3X5.7 FPM Warm liquid version O-ring 375X8.4-1 NBR O-ring 375X8.4 FPM Pipe Pipe Pipe bend Pipe Hex.socket hd screw M6X12-A Plate Plate Slotted head screw M4X12-A Expanding plug unit Expanding plug unit Cable unit (FLS) Cable unit (FLS,CLS30) Cable unit (FLS,CLS30) Leakage detect.unit (FLS) Leakage detect.unit (CLS30) (EX) Bearing holder Bearing holder For FLS execution Bearing holder For CLS 30 and FLS execution Bearing holder For FLS execution Bearing holder For CLS 30 and FLS execution (EX) Bearing holder FM approved (EX) Bearing holder EN approved Retaining ring SGA Supporting washer Ball bearing (EX) Bearing cover Bearing cover Hexagon head screw M10X40-A Mechanical seal Lock washer Hex.socket hd screw M6X12-A Inspection screw EX approved Inspection screw SS 2 1 Flygt /180/280/290 Parts List 17

20 Drive Unit Pos. No Part. No Denomination Qty/Version Inspection screw Plug Plug Warm liquid version O-ring 19.2X3 FPM O-ring 19.2X3 NBR O-ring 26.2X3 NBR O-ring 28.17X NBR O-ring 28.17X3.53 FPM Spring washer DIN 128-A-16-A Protective plug Oil housing Oil housing bottom O-ring 399.3X5.7 NBR O-ring 399.3X5.7 FPM O-ring 419.3X5.7 NBR O-ring 419.3X5.7 FPM Gasket compl Gasket compl Hex.socket hd screw M10X35-A Hex.socket hd screw M10X35-A Washer Screw with barrel Screw with barrel Compression spring Wear protection Wear protect.compl. Warm liquid version Parallel pin CP-H8-4X Parallel pin CP-H8-4X Mechanical seal WCCR/WCCR Mechanical seal RSIC/RSIC Seal ring FPM Hex.socket hd screw M16X60-A Hex.socket hd screw M16X60-A Plain washer 16-A2-A Plain washer 16-A4-A Parallel key 14H9X9H11X Parallel key 10H9X8H11X Parallel key 14H9X9H11X70-A4 18 Flygt /180/280/290 Parts List

21 Drive Unit Pos. No Part. No Denomination Qty/Version Plain washer (33)-35 MM Plain washer (37)-39 MM Plain washer 44.5X52X2-A Plain washer (14)-20 MM Plain washer (20)-32 MM Plain washer (30)-32 MM Plain washer (32)-34 MM Plain washer (32)-35 MM Seal sleeve (14)-17 MM Seal sleeve (17)-20 MM Seal sleeve (20)-23 MM Seal sleeve (23)-26 MM Seal sleeve (26)-29 MM Seal sleeve (29)-32 MM Seal sleeve (32)-35 MM Seal sleeve (36)-38 MM Seal sleeve (38)-41 MM Ring O-ring 19.2X3 FPM Extra O-rings for inspection-screw O-ring 19.2X3 NBR Extra O-rings for inspection-screw O-ring 26.2X3 NBR Extra O-rings for inspection-screw O-ring 28.17X NBR Extra O-rings for inspection-screw O-ring 28.17X3.53 FPM Extra O-rings for inspection-screw Flygt /180/280/290 Parts List 19

22 Hydraulic Unit Hydraulic Unit C_ LT Curve: , C_ 3201 LT Flygt /180/280/290 Parts List

23 Hydraulic Unit C_ MT MT, curve: 630, 632, C_ 3201 MT Flygt /180/280/290 Parts List 21

24 Hydraulic Unit C_ MT MT, curve: C_ /290 MT Flygt /180/280/290 Parts List

25 Hydraulic Unit C_ HT 50/60Hz, curve: 450, 452, C_ 3201 HT Flygt /180/280/290 Parts List 23

26 Hydraulic Unit C_ HT 60Hz, curve: 454 C_ 3201 HT (60 Hz) Flygt /180/280/290 Parts List

27 Hydraulic Unit C_ HT Curve: 452, 456, 652, 656 C_ /290 HT Flygt /180/280/290 Parts List 25

28 Hydraulic Unit Curve: 460, 462, 660, 662 C_ /290 HT Flygt /180/280/290 Parts List

29 Hydraulic Unit C_ SH Curve: C_ 3201 SH Flygt /180/280/290 Parts List 27

30 Hydraulic Unit H_ HT-HD Curve: H_ 3201 HT-HD Flygt /180/280/290 Parts List

31 Hydraulic Unit LL LL / Flygt /180/280/290 Parts List 29

32 Hydraulic Unit List of parts Pos. No Part. No Denomination Qty/Version Ring For curve: 452, 455, 456, Ring For curve: Ring For curve: Ring For curve: 452, Wear protection Insert ring For Super HT. curve: Impeller unit High head "HT", Curve No: 454, 60 Hz, 3-phase Impeller unit High head "HT", Curve No: 450, 50 Hz, 3-phase Impeller unit High head "HT", Curve No: 452, 50/60 Hz, 3-phase Impeller unit High head "HT", Curve No: 456, 50 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 630, 50 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 632, 50/60 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 634, 50/60 Hz, 3-phase Impeller unit High head "HT", Curve No: 457, 50/60 Hz, 3-phase Impeller High head "HD", Curve No: 460, 660, 50 Hz, 3-phase. (Available as option) Impeller High head "HD", Curve No: 462, 662, 50/60 Hz, 3-phase. (Available as option) Impeller Optional Impeller unit Medium head "MT", Curve No: 636, 50/60 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 637, 50/60 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 638, 50/60 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 635, 50/60 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 635, 50 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 636, 50/60 Hz, 3-phase Impeller unit Medium head "MT", Curve No: 637, 50/60 Hz, 3-phase Impeller Medium head "MT", Curve No: 639, 60 Hz, 3-phase. Only US market 30 Flygt /180/280/290 Parts List

33 Pos. No Part. No Denomination Impeller unit High head "HT", Curve No: 458, 50/60 Hz, 3-phase Impeller unit High head "HT", Curve No: 455, 50 Hz, 3-phase Impeller unit High head "HT", Curve No: 452, 50/60 Hz, 3-phase Impeller unit High head "HT", Curve No: 456, 656, 50 Hz, 3-phase Impeller Super High head "SH", Curve No: 263, 50 Hz, 3-phase Impeller Super High head "SH", Curve No: 264, 50 Hz, 3-phase Impeller Super High head "SH", Curve No: 265, 50 Hz, 3-phase Impeller Low head "LT", Curve No: 821, 60 Hz, 3- phase Impeller Low head "LT", Curve No: 822, 60 Hz, 3- phase Impeller Low head "LT", Curve No: 823, 60 Hz, 3- phase Impeller Low head "LT", Curve No: 624, 50/60 Hz, 3-phase Impeller Low head "LT", Curve No: 625, 50/60 Hz, 3-phase Impeller Low head "LT", Curve No: 626, 50 Hz, 3- phase Impeller Low head "LT", Curve No: 627, 50 Hz, 3- phase Impeller Low head "LT", Curve No: 628, 50 Hz, 3- phase Impeller Low head "LT", Curve No: 629, 50 Hz, 3- phase Qty/Version Wear ring Intended for "LT" Wear ring Intended for "MT" Wear ring Intended for "HT" Wear ring Intended for "HT" Curve code: Wear ring Intended for "MT" Curve code: Wear ring Intended for "HT" Curve code: 452, 456, Wear ring Intended for "HT HD" Sleeve Gasket O-ring 59.5X3 NBR O-ring 59.5X3 FPM Supporting washer For impeller code Hydraulic Unit Flygt /180/280/290 Parts List 31

34 Hydraulic Unit Pos. No Part. No Denomination Qty/Version Supporting washer , 630, 632, , 450, Supporting washer , 630, 632, , 450, 452, , 260, Hex.socket hd screw M16X60-A2-70 For Curve code:630, , 450, 452, 454, 458, 460, 462, 660, Hex.socket hd screw M16X90-A , Hex.socket hd screw M16X60-A4-80 For "MT and HT" Hex.socket hd screw MC6S 12X Bell mouth O-ring 99.1X5.7 NBR Hex.socket hd screw M16X80-A G-ring D=617; T= Wear ring For "HT", 150 Rubber Wear ring For "HT", 150 Rubber Wear ring For "HT", 150 Rubber Wear ring For "SH", 100 Rubber Ring For "HT", 150 L.Red Brass Ring For "HT", 150 L.Red Brass Ring For "SH", 100 L.Red Brass Ring For "MT", 200 L.Red Brass Ring For "MT", 300 L.Red Brass Ring For "HT", 150 St. Steel Wear ring compl. For "LT", 300 Rubber Wear ring compl. For "MT", 200 Rubber Wear ring compl. For "MT", 200 Rubber Ring For curve code: Ring For curve code: Ring For curve code: Ring For curve code: Insert ring Ring Hex.socket hd screw M10X40-A O-ring 144.3X5.7 FPM Pump housing "MT" Medium head version DN 200 (10"), Undrilled Pump housing "MT" Medium head version DN 200 (10"), Drilled to EN tab.8. ANSI B ; tab Pump housing "MT" Medium head version DN 200 (10"), Drilled to EN tab.9 32 Flygt /180/280/290 Parts List

35 Pos. No Part. No Denomination Pump housing "MT" Medium head version DN 200 (10"), Undrilled, For flush valve Pump housing "HT" High head version DN 150 (6"), Undrilled Pump housing "HT" High head version DN 150 (6"), Drilled to EN tab.9. ANSI B ; tab Pump housing "HT" High head version DN 150 (6"), Undrilled, For flush valve Pump housing "MT" Medium head version DN 200 (8"), Undrilled Pump housing "MT" Medium head version DN 200 (8"), Drilled to EN tab. 8. ANSI B ; tab Pump housing "HT" High head version DN 150 (6"), Undrilled Pump housing "HT" High head version DN 150 (6"), Drilled to EN tab.9. ANSI B ; tab Pump housing "HT" High head version DN 150 (6"), Drilled to EN tab. 9 ANSI B ; tab Pump housing "LT" Low head version DN 300 (12"), Undrilled Pump housing "LT" Low head version DN 300 (12"), Drilled to EN tab Pump housing "LT" Low head version DN 300 (12"), Drilled to ANSI B ; tab Pump housing "LT" Low head version DN 300 (12"), Drilled to EN tab Pump housing "LT" Low head version DN 300 (12"), Undrilled, For flush valve Qty/Version Diffuser uncoated "LL" Lift pump version Pump housing "SH" Super high head version DN 100 (4"), Undrilled Pump housing "SH" Super high head version DN 100 (4"), Drilled to EN tab Pump housing "SH" Super high head version DN 100 (4"), Undrilled Hex.socket hd screw M10X25-A Cover Gasket Hydraulic Unit Flygt /180/280/290 Parts List 33

36 Installation Components Installation Components CP 34 Flygt /180/280/290 Parts List

37 Installation Components CP /180 SH Flygt /180/280/290 Parts List 35

38 Installation Components CP CP / Flygt /180/280/290 Parts List

39 Installation Components CS CS /180 SH Flygt /180/280/290 Parts List 37

40 Installation Components CS CS / Flygt /180/280/290 Parts List

41 Installation Components CS/HS CS/HS / Flygt /180/280/290 Parts List 39

42 Installation Components CT CT / Flygt /180/280/290 Parts List

43 Installation Components CT /180 SH Flygt /180/280/290 Parts List 41

44 Installation Components CZ CZ Flygt /180/280/290 Parts List

45 Installation Components LL LL / Flygt /180/280/290 Parts List 43

46 Installation Components List of parts Pos. No Part. No Denomination Qty/Version Discharge con.stat. IN/OUT 300/350MM "LT" Low head version, Undrilled Discharge con.stat. IN/OUT 300/350MM "LT" Low head version, Drilled to EN tab Discharge con.stat. IN/OUT 300/350MM "LT" Low head version, Drilled to ANSI B ; tab Discharge con.stat. IN/OUT 300/350MM "LT" Low head version, Drilled to EN tab Discharge con.stat. IN/OUT 200/200MM Option Discharge connection IN/OUT 200/250MM Discharge connection IN/OUT 200/250MM Discharge connection IN/OUT 200/250MM Discharge con.stat. "LT" LOW HEAD DN Discharge con.stat. "LT" LOW HEAD DN Discharge con.stat. "LT" LOW HEAD DN Discharge con.stat. "LT" LOW HEAD DN 300 "MT" Medium head version, Undrilled 1 "MT" Medium head version, Drilled to EN tab. 8 "MT" Medium head version, Drilled to ANSI B ; tab Ring Ring Sliding bracket Sliding bracket Hexagon head screw M20X110-A Hexagon head screw M20X110-A Discharge connection Super high head "SH" DN Discharge connection Medium head "MT" DN Discharge connection High head "HT" DN Discharge connection High head "HT" DN 150 With hose coupling R Discharge connection Medium head "MT" DN Discharge connection High head "HT" DN Discharge connection "LT" LOW HEAD DN 300 Low head "LT" DN Hexagon head screw M20X70-A Hexagon head screw M16X60-A Hexagon head screw M20X70-A Hexagon head screw M20X80-A Flygt /180/280/290 Parts List

47 Pos. No Part. No Denomination Qty/Version Plain washer 16-A2-A Plain washer 20-A2-A Plain washer 20-A4-A Hexagon head screw M20X60-A Hexagon head screw M20X60-A Hexagon nut M20-A Hexagon nut M16-A Hexagon nut M20-A Gasket 4" Super HT Diam Gasket 8" MT Diam Gasket MT Diam Gasket 6" MT Diam Gasket HT Diam Gasket 370 MM LT Diam Stand compl. H = 196mm Stand compl. S and T installation. MT and HT Stand compl. S/T INSTALLATION S and T installation. LT Hexagon head screw M16X40-A Hexagon head screw M16X40-A Hexagon head screw M16X45-A Plain washer 16-A2-A Suction pipe unit DN200 (8") HIGH HEAD"HT" Suction pipe unit DN200 (8") HIGH HEAD"HT" Drilled to EN tab. 8, ANSI B ; tab.5 Drilled to EN tab Suction pipe unit DN 400 "LT" Low head version, Drilled to EN tab Suction pipe unit DN 400 "LT" Low head version, Drilled to ANSI B ; tab Suction pipe unit DN 400 "LT" Low head version, Drilled to EN tab Suction pipe unit DN250 (10") MEDIUM HEAD Suction pipe unit DN250 (10") MEDIUM HEAD Suction pipe unit DN250 (10") MEDIUM HEAD Drilled to EN tab. 8 Drilled to ANSI B ; tab.5 Drilled to EN tab Hexagon head screw M12X30-A2-70 For "LT" Hexagon head screw M12X35-A2-70 Intended for , 31, 35, 37; , 01, 05, Hexagon head screw Intended for , Installation Components Flygt /180/280/290 Parts List 45

48 Installation Components Pos. No Part. No Denomination Qty/Version Cleaning door Intended for , 26, Cleaning door Intended for , 05, Cleaning door For "LT" Gasket For "HT/MT" Gasket For "LT" Plug For "LT" Gasket 300 PN Gasket 6" Gasket 250 PN Hexagon head screw M16X70-A Hexagon head screw M20X50-A2-70 (ONLY TRSP) Hexagon head screw M20X90-A Coupling part DN 150 G6" INNER STORZ Sticker Shrink hose ID 9.5 * * Alarm unit "MINCAS" II 1 46 Flygt /180/280/290 Parts List

49 Service Parts Service Parts List of parts Pos. No Part. No Denomination O-ring kits 3170/ /091/120/ Basic repair kit , ,180 Qty/Version Oil 7.5l * * * * Grease * * * * Flygt /180/280/290 Parts List 47

50

51

52 Xylem zīləm 1) The tissue in plants that brings water upward from the roots 2) A leading global water technology company We're 12,500 people unified in a common purpose: creating innovative solutions to meet our world's water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise, backed by a legacy of innovation. For more information on how Xylem can help you, go to xyleminc.com Xylem Water Solutions AB Gesällvägen Sundbyberg Sweden Tel Fax Visit our Web site for the latest version of this document and more information The original instruction is in English. All non- English instructions are translations of the original instruction Xylem Inc _5.0_en.US_ _GPL