Series e-60. In-Line Mounted Centrifugal Pumps Maintenance Free Replacement Parts PARTS LIST CP-107-PL
|
|
|
- Stewart Hodges
- 5 years ago
- Views:
Transcription
1 Series e-60 In-Line Mounted Centrifugal Pumps Maintenance Free Replacement Parts PARTS LIST CP-107-PL
2 Index How to Use This Parts List... 3 Exploded View Series e-60 Maintenance Free Pump... 4 Standard Stock Model Replacement Parts... 5 Series e-60 1x1x5.25 Replacement Parts... 6 Series e x1.25x5.25 Replacement Parts... 7 Series e x1.5x5.25 Replacement Parts... 8 Series e x1.5x6.25 Replacement Parts... 9 Series e x1.5x7 Replacement Parts Series e-60 2x2x5.25 Replacement Parts Series e-60 2x2x6.25 Replacement Parts Series e-60 2x2x7 Replacement Parts Series e-60 3x3x5.25 Replacement Parts Coupler Chart
3 How to use this PARTS LIST The pump nameplate identifies the pump by model number, pump construction and impeller diameter as shown below. Pump Size Impeller Diameter Pump Series Date Manufactured November, 2016 CAP. SERIAL BELL & GOSSETT e-60 PUMP BELL & GOSSETT e-60 PUMP SIZE PUMP 1.25x BF Capacity & CAP. 30 GPM 15 FT Head MOTOR RPM Motor Horsepower Pump Size L61 Pump Construction SIZE 1.25x5.25 IDENT. SERIAL 1EF083LF L61 Serial Number Date Manufactured November, 2016 Part Number NAMEPLATE FOR BUILT-TO-ORDER PUMPS NAMEPLATE FOR STOCK PUMPS The BTO nameplate above identifies the pump as a Series e-60, size 1.25x5.25 with Bronze-Fitted (BF) construction. The impeller diameter is 4 1 /4" and the pump is sized to pump 30 GPM at 15 ft of head. The motor horsepower is 0.25 and the motor speed is 1750 RPM. The serial number uniquely identifies each individual BTO unit for future reference. The Stock Pump nameplate identifies the pump as a Series e-60, size 1.25x5.25, with date code indicating it was built in November The part number can be used to provide all other pump information through a part number search. DO NOT REMOVE THE NAMEPLATE. It is important when ordering replacement parts to furnish complete nameplate data. The following procedure will result in proper parts selection: 1. Using the nameplate, determine the model number, pump construction and impeller diameter. 2. Refer to the index of this document to find the parts breakdown for a specific pump model. 3. Find the column pertaining to the pump's specific materials of construction (Bronze-Fitted vs All Bronze) 4. Match the Item Number on the table to the numbered drawing on page 4 to help verify correct part number identification. 3
4 * * *For 1.5x1.5x7 and 2x2x7 only. ADAPTER CAPSCREW (8) (Sizes 1.5x1.5x6.25 and 2x2x6.25 only) ADAPTER (Sizes 1.5x1.5x6.25 and 2x2x6.25 only) ADAPTER GASKET (Sizes 1.5x1.5x6.25 and 2x2x6.25 only) Series e-60 Maintenance Free Pump Exploded View
5 STANDARD STOCK MODEL REPLACEMENT PARTS (6) MOTOR (5) (4) (8) PUMP MODEL PUMP SIZE HORSEPOWER BEA IMPELLER COUPLER ASSEMBLY DIAMETER IMPELLER e601s & e601t 1x1x5.25 1/ LF 4 3 /8" P82878 Be601S & Be601T 1x1x5.25 1/ LF 4 3 /8" P82878 e602s & e602t 1x1x5.25 1/ LF 4 27 /32" P82877 Be602 & Be602T 1x1x5.25 1/ LF 4 27 /32" P82877 e603s & e603t 1x1x5.25 1/ LF 5 1 /4" P58541 Be603S & Be603T 1x1x5.25 1/ LF 5 1 /4" P58541 e604s & e604t 1.25x1.25x5.25 1/ LF 4 3 /8" P82878 Be604S & Be604T 1.25x1.25x5.25 1/ LF 4 3 /8" P82878 e605s & e605t 1.25x1.25x5.25 1/ LF 4 27 /32" P82877 Be605S & Be605T 1.25x1.25x5.25 1/ LF 4 27 /32" P82877 e606s & e606t 1.25x1.25x5.25 1/ LF 5 1 /4" P58541 Be606S & Be606T 1.25x1.25x5.25 1/ LF 5 1 /4" P58541 e607s & e607t 1.5x1.5x5.25 1/ LF 4 3 /8" P82881 Be607S & Be607T 1.5x1.5x5.25 1/ LF 4 3 /8" P82881 e608s & e608t 1.5x1.5x5.25 1/ LF 4 15 /16" P82880 Be608S & Be608T 1.5x1.5x5.25 1/ LF 4 15 /16" P82880 e609s & e609t 1.5x1.5x5.25 3/ LF 5 1 /4" P58538 Be609S & Be609T 1.5x1.5x5.25 3/ LF 5 1 /4" P58538 e610s & e610t 2x2x5.25 1/ LF 4 1 /8" P82883 Be610S & Be610T 2x2x5.25 1/ LF 4 1 /8" P82883 e611s & e611t 2x2x5.25 3/ LF 4 3 /4" P82882 Be611S & Be611T 2x2x5.25 3/ LF 4 3 /4" P82882 e612s & e612t 2x2x LF 5 1 /4" P58536 Be612S & Be612T 2x2x LF 5 1 /4" P58536 e613s & e613t 1.5x1.5x6.25 3/ LF* 5 3 /4" P82884 e614s & e614t 1.5x1.5x LF* 6 1 /4" P58564 Be614S & Be614T 1.5x1.5x LF* 6 1 /4" P58564 e615s & e615t 2x2x6.25 3/ LF* 5 5 /8" P82885 Be615S & Be615T 2x2x6.25 3/ LF* 5 5 /8" P82885 e616s & e616t 2x2x LF* 6 7 /32" P58562 e617s & e617t 1.5x1.5x LF 6 1 /2" P57460 e618t 1.5x1.5x7 2 NONE LF 7" P57440 e619t 2x2x7 2 NONE LF 6 1 /2" P82137 e620t 2x2x7 3 NONE LF 7" P57580 e621s & e621t 1.5x1.5x6.25 1/ LF* 4 7 /8" P58661 Be621S & Be621T 1.5x1.5x6.25 1/ LF* 4 7 /8" P58661 e622s & e622t 1.5x1.5x7 3/ LF 5 1 /2" P58662 e623s & e623t 1.5x1.5x LF 6" P58663 e624s & e624t 2x2x LF 5 11 /16" P58664 e625s & e625t 2x2x LF 6 1 /8" P58665 e626s & e626t 3x3x5.25 3/ LF 4 3 /8" P83023 Be626S & Be626T 3x3x5.25 3/ LF 4 3 /8" P83023 e627s & e627t 3x3x P LF 5 1 /4" P58636 Be627S & Be627T 3x3x P LF 5 1 /4" P58636 *Adapter ring gasket P58542 must also be ordered when bearing assembly is replaced on all 6.25" pumps. With EPR/Carbon/SiC Seal 5
6 SERIES e-60 1x1x Volute LF 7 Volute Capscrew (8 Req d) P10620 P Volute Gasket P57410 P Impeller (State Diameter) P58541 P58541 Impeller Key P04940 P Impeller Nut P P Impeller Washer P04660 P04660 Flange (2 Req d) P01510 P00794 Fastener Package P64910 P64910 Flange Gasket Set XL-11 BEA ASSEMBLIES (FOR BF OR AB PUMPS) Bearing Assy. Includes the Following: Seal Kit No. XL-11 Small Bearing Frame SHAFT LF LF LF LF LF LF LF* LF* LF* * * * 2 Volute Gasket P57410 P57410 P57410 P57410 P57410 P COUPLERS 6 POWER PACKS 1/ / /
7 SERIES e x1.25x Volute LF 7 Volute Capscrew (8 Req d) P10620 P Volute Gasket P57410 P Impeller (State Diameter) P58541 P58541 Impeller Key P04940 P Impeller Nut P P Impeller Washer P04660 P04660 Flange (2 Req d) P03250 P03251 Fastener Package P64910 P64910 Flange Gasket Set XL-11 BEA ASSEMBLIES (FOR BF OR AB PUMPS) Bearing Assy. Includes the Following: Seal Kit No. XL-11 Small Bearing Frame SHAFT LF LF LF LF LF LF LF* LF* LF* * * * 2 Volute Gasket P57410 P57410 P57410 P57410 P57410 P COUPLERS 6 POWER PACKS 1/ / /
8 SERIES e x1.5x Volute LF 7 Volute Capscrew (8 Req d) P10620 P Volute Gasket P57410 P Impeller (State Diameter) P58538 P58538 Impeller Key P04940 P Impeller Nut P P Impeller Washer P04660 P04660 Flange (2 Req d) P03410 P Fastener Package P64940 P64930 Flange Gasket Set XL-11 BEA ASSEMBLIES (FOR BF OR AB PUMPS) 4 Bearing Assy. Includes the Following: 11 Seal Kit No. SHAFT LF LF LF LF LF LF 3 XL-11 Small Bearing Frame LF* LF* LF* Volute Gasket P57410 P57410 P57410 P57410 P57410 P COUPLERS 6 POWER PACKS 1/ / /
9 SERIES e x1.5x Volute LF 7 Volute Capscrew (8 Req d) P10620 P Volute Gasket P57410 P Adapter Ring P58576 P Adapter Ring Capscrew (8 Req d) DJ0034 P Adapter Ring Gasket P58542 P Impeller (State Diameter) P58564 P58564 Impeller Key P04940 P Impeller Nut P P Impeller Washer P04660 P04660 Flange (2 Req d) P03410 P Fastener Package P64940 P64930 Flange Gasket Set Motor Ring Adapter P76944 P76944 XL-11 BEA ASSEMBLIES (FOR BF OR AB PUMPS) 4 Bearing Assy. Includes the Following: 11 Seal Kit No. SHAFT **186028LF 1 **186029LF 2 **186030LF 3 **186031LF 1 **186032LF 2 **186033LF 3 XL-11 Small Bearing Frame LF* LF* LF* * * * 2 Volute Gasket P57410 P57410 P57410 P57410 P57410 P57410 **Adapter Ring Gasket P58542 must also be ordered when bearing assembly is replaced on all 6.25" pumps. 5 COUPLERS 6 POWER PACKS 1/ NONE 9
10 4 11 SERIES e x1.5x7 1 Volute LF 7 Volute Capscrew (8 Req d) P40020 P Volute Gasket P57700 P Impeller (State Diameter) P57440 P57440 Impeller Key P49358 P Impeller Nut P P Impeller Washer P11220 P11220 Flange (2 Req d) P03410 P Fastener Package P64940 P64930 Flange Gasket Set Bearing Assy. Includes the following: Seal Kit No. XL-11 Lrg. Bearing Frame XL-11 BEA ASSEMBLIES FOR (BF) PUMPS SHAFT LF LF LF LF LF LF LF LF LF LF LF LF LF* LF* LF* * * * 2 Volute Gasket P57700 P57700 P57700 P57700 P57700 P Cover Plate P57246 P57246 P57246 P57246 P57246 P Coupler Cover P03982 P03982 P03982 P03982 P03982 P FOR (AB) PUMPS Bearing Assy. Includes LF LF LF LF 1 the Following: LF LF 3 Seal Kit No LF LF LF LF LF LF 3 XL-11 Lrg. Bearing Frame LF* LF* LF* * * * 2 Volute Gasket P57700 P57700 P57700 P57700 P57700 P Cover Plate P P P P P P Coupler Cover P03982 P03982 P03982 P03982 P03982 P COUPLERS 6 POWER PACKS NONE 2 NONE NONE
11 SERIES e-60 2x2x Volute LF 7 Volute Capscrew (8 Req d) P10620 P Volute Gasket P57410 P Impeller (State Diameter) P58536 P58536 Impeller Key P04940 P Impeller Nut P P Impeller Washer P04660 P04660 Flange (2 Req d) F14200 P Fastener Package (2 Req d) P65031 P65030 Flange Gasket Set Motor Ring Adapter P76944 P76944 XL-11 BEA ASSEMBLIES (FOR BF OR AB PUMPS) 4 Bearing Assy. Includes the Following: 11 Seal Kit No. SHAFT LF LF LF LF LF LF 3 XL-11 Small Bearing Frame LF* LF* LF* Volute Gasket P57410 P57410 P57410 P57410 P57410 P COUPLERS 6 POWER PACKS 1/ / NONE 11
12 SERIES e-60 2x2x Volute LF 7 Volute Capscrew (8 Req d) P10620 P Volute Gasket P57410 P Adapter Ring P58576 P Adapter Ring Capscrew (8 Req d) DJ0034 P Adapter Ring Gasket P58542 P Impeller (State Diameter) P58562 P58562 Impeller Key P04940 P Impeller Nut P P Impeller Washer P04660 P04660 Flange (2 Req d) F14200 P Fastener Package (2 Req d) P65031 P65030 Flange Gasket Set Motor Ring Adapter P76944 P76944 XL-11 BEA ASSEMBLIES (FOR BF OR AB PUMPS) 4 Bearing Assy. Includes the Following: 11 Seal Kit No. SHAFT **186028LF 1 **186029LF 2 **186030LF 3 **186031LF 1 **186032LF 2 **186033LF 3 XL-11 Small Bearing Frame LF* LF* LF* * * * 2 Volute Gasket P57410 P57410 P57410 P57410 P57410 P57410 **Adapter Ring Gasket P58542 must also be ordered when bearing assembly is replaced on all 6 1 4" pumps. 5 COUPLERS 6 POWER PACKS 1/ / NONE 12
13 SERIES e-60 2x2x7 1 Volute LF 7 Volute Capscrew (8 Req d) P40020 P Volute Gasket P57700 P Impeller (State Diameter) P57580 P57580 Impeller Key P49358 P Impeller Nut P P Impeller Washer P11220 P11220 Flange (2 Req d) F14200 P Fastener Package (2 Req d) P65031 P64930 Flange Gasket Set XL-11 BEA ASSEMBLIES 4 Bearing Assy. Includes the following: 11 Seal Kit No. FOR (BF) PUMPS SHAFT LF LF LF LF LF LF LF LF LF LF LF LF 3 XL-11 Lrg. Bearing Frame LF* LF* LF* * * * 2 Volute Gasket P57700 P57700 P57700 P57700 P57700 P Cover Plate P57246 P57246 P57246 P57246 P57246 P Coupler Cover P03982 P03982 P03982 P03982 P03982 P03982 FOR (AB) PUMPS 4 Bearing Assy. Includes LF LF LF LF LF LF 3 the Following: 11 Seal Kit No LF LF LF LF LF LF 3 XL-11 Lrg. Bearing Frame LF* LF* LF* * * * 2 Volute Gasket P57700 P57700 P57700 P57700 P57700 P Cover Plate P P P P P P Coupler Cover P03982 P03982 P03982 P03982 P03982 P COUPLERS 6 POWER PACKS / NONE 2 NONE NONE 3 NONE NONE 13
14 SERIES e-60 3x3x Volute P Volute Capscrew (8 Req d) P10620 P Volute Gasket P57410 P Impeller (State Diameter) P58536 P58536 Impeller Key P04940 P Impeller Nut P P Impeller Washer P04660 P04660 Flange (2 Req d) F74000 P Fastener Package P65130 P65130 Flange Gasket Set Motor Ring Adapter P76944 P76944 XL-11 BEA ASSEMBLIES (FOR BF OR AB PUMPS) 4 Bearing Assy. Includes the Following: 11 Seal Kit No. SHAFT LF LF LF LF LF LF 3 XL-11 Small Bearing Frame LF* LF* LF* Volute Gasket P57410 P57410 P57410 P57410 P57410 P COUPLERS 6 POWER PACKS 1/ / / NONE 14
15 5 COUPLERS PUMP SIZE 1x1x x1.25x x1.5x x1.5x6.25 2x2x5.25 2x2x6.25 3x3x x1.5x7 2x2x7 SHAFT DIAMETER 1 2" 3 4" MOTOR (60 Hz) ¼ - ½ MOTOR FRAME SIZE MOTOR SHAFT SIZE STANDARD COUPLER ELASTOMERIC COUPLER OPTION B&G POWER ¾ - 1 PACK 1 2" ¼ " C 5 8" P75421 P TC 7 8" P75422 P / " P58598 P58598 ¾ - 1 B&G POWER PACK 1 2" ¾ " " / " / " P77281 P
16 Xylem 1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company. We re a global team unified in a common purpose: creating advanced technology solutions to the world s water challenges. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. Our products and services move, treat, analyze, monitor and return water to the environment, in public utility, industrial, residential and commercial building services, and agricultural settings. With its October 2016 acquisition of Sensus, Xylem added smart metering, network technologies and advanced data analytics for water, gas and electric utilities to its portfolio of solutions. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise with a strong focus on developing comprehensive, sustainable solutions. For more information on how Xylem can help you, go to We value your feedback. Please take our 3 question survey at bellgossett.com/survey to let us know how we are doing. Xylem Inc N. Austin Avenue Morton Grove, Illinois Phone: (847) Fax: (847) Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries Xylem Inc. CP-107-PL April 2017
PARTS LIST CP-210-PL. Series e Close Coupled Centrifugal Pumps. Replacement Parts
Series e-1535 Close Coupled Centrifugal Pumps Replacement Parts PARTS LIST CP-210-PL PARTS LIST CP-210PL SERIES e-1535 Index How to use this Parts List Page 3 e-1535 Pump Exploded View Page 4 Replacement
PART LISTS D-421G-PL. Domestic Pump. Series B35 REPLACEMENT PARTS FOR. 2 ft. NPSH Centrifugal Pumps Styles PF and PVF and HB-35
PART LISTS D-21G-PL Domestic Pump Series B35 REPLACEMENT PARTS FOR 2 ft. NPSH Centrifugal Pumps Styles PF and PVF and HB-35 Index How To Use This Parts List........................................... 3
Bell & Gossett Parts List CP-106F-PL. Replacement Parts for. Series 60 Maintenance Free In-Line Mounted Centrifugal Pumps
Bell & Gossett Parts List CP-106F-PL Replacement Parts for Series 60 Maintenance Free In-Line Mounted Centrifugal Pumps SERIES 60 How to use this PARTS LIST The pump nameplate identifies the pump by model
CURVES B-194. Series e-60 MAINTENANCE FREE IN-LINE MOUNTED CENTRIFUGAL PUMPS PERFORMANCE CURVES
CURVES B-194 MAINTENANCE FREE IN-LINE MOUNTED CENTRIFUGAL PUMPS PERFORMANCE CURVES TABLE OF CONTENTS Useful Pump Formulas..................................................................... 2 Stock Pump
Series e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL
Series e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL PARTS LIST CP-208G-PL SERIES e-1510 Index Nameplate Data.................................................. Exploded Views...................................................
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL SERIES 8150 CROSS SECTION 0-952-3 0-952-4 0-952-5 2-904-2 0-952-2 0-952-1 0-952-6 2-001-0 2-916-1 2-904-1 2-123-5 0-905-0
Domestic. Pump Series CS Condensate Units SINGLE OR DUPLEX 1,000 THRU 150,000 SQ. FT. EDR-250 THRU 37,500 LB./HR.
Steel Receivers: Durable, Lightweight in sizes to 250 gallon (946L) Centrifugal Pumps: Provide generous running clearances. Standard 500 RPM for best hydraulic efficiencies, optional 750 RPM Float Switches:
CP-506B-PL. Series HSCS. Horizontal Split Case Pumps. Replacement Parts
Series HSCS Horizontal Split Case Pumps Replacement Parts PARTS List CP-506B-PL PARTS LIST CP-505-PL Index Description Page No. Exploded View....3 Parts List for 6x10x22, 8x12x22M, 8x12x22L, 8x12x27, and
Bell & Gossett Parts List CP-302F-PL. Replacement Parts for Series 1522 Uni-Built Centrifugal Pumps
Bell & Gossett Parts List CP-302F-PL Replacement Parts for Series 1522 Uni-Built Centrifugal Pumps SERIES 1522 2 3 4 5 Standard Size Designations ITEM NO. 6 6 8 5 PUMP PART NUMBER BUILT-TO-ORDER EQUIVALENT
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R5
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R5 TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...3 NPE Seal Chart (Part of Numbering System)...3 Parts List...4 Optional Components...4
A-C Fire Pump. Fitting and Accessories A-C 100A
A-C Fire Pump Fitting and Accessories A-C 100A A-C Fire Pump Fitting and Accessories Table of Content Page Automatic Air Release Valve... 1 Suction And Discharge Gauge Assembly... 2 Casing Relief Valve...
TECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP
TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free
TECHNICAL BROCHURE BAC2000. Series 2000 Closed Coupled. Series 2000 Frame Mounted. Series A-C 2000 SINGLE STAGE END SUCTION
TECHNICAL BROCHURE BAC0 Series 0 Closed Coupled Series 0 Frame Mounted Series A-C 0 SINGLE STAGE END SUCTION Series A-C 0 End Suction Close Coupled - Model 0 APPLICATIONS General Industry Water Supply
G&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS
TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump
Pure performance STEADY 1300 SERIES
Pure performance STEADY 1300 SERIES Available EASY TO SELECT, QUICK DELIVERY, THE RIGHT PUMP FOR YOUR NEEDS Oustanding Value EFFICIENT, POWERFUL Reliable SOLIDS HANDLING, CONTINUOUS RUNNING 2 Readily available
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
Series HSC-S Pumps Technical Brochure
Series HSCS Pumps Technical Brochure BX512L Table of Contents Useful Pump Formulas 2 60 Cycle Performance Curves Series HSCS 3 50 Cycle Performance Curves Series HSCS 4 Series HSCS Materials of Construction
TECHNICAL BROCHURE BCP3PH R9. Three Phase 4" Motors, ½-10 HP 60 HERTZ, 3450 RPM
TECHNICAL BROCHURE BCP3PH R9 Three Phase 4" Motors, ½-10 HP 60 HERTZ, 3450 RPM FEATURES 304 SS casing and end bells for corrosion resistance Kingsbury type, 3 shoe, thrust bearing, see chart for ratings
TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
McDonnell & Miller Service Parts Catalog PARTS LIST MM-701D
McDonnell & Miller Service Parts Catalog PARTS LIST MM-70D Table of Contents Table of Contents Table of Contents 3 4 For Repl. Probe Part Weight Model Model No. Number Description lbs. (kg) PS-80-0 PA-800
Pure Performance FLYGT 1300 SERIES
Pure Performance FLYGT 1300 SERIES Available EASY TO SELECT, QUICK DELIVERY, THE RIGHT PUMP FOR YOUR NEEDS Oustanding Value EFFICIENT, POWERFUL Reliable SOLIDS HANDLING, CONTINUOUS RUNNING 2 Readily available
TECHNICAL BROCHURE BC3WIRE-G2 R4
FEATURES 304 SS casing and end bells for corrosion resistance 304 SS casing and end bells for corrosion resistance Kingsbury type, 3 shoe, thrust bearing, see chart for ratings. Stainless steel, 17-4 PH
Series 1510 Centrifugal Pumps
Series 1 Centrifugal Pumps B-207H Table of Contents Useful Pump Formulas... 2 Standard Features... 3 Technical Data... Materials of Construction... Selection Charts... 6 Performance Curves... 7 Centrifugal
REPAIR PARTS R36/3756 R /3756 S, M & L-Group REPAIR PARTS
REPAIR PARTS R6/756 R1 656/756 S, M & L-Group REPAIR PARTS PUMP END PARTS FOR CLOSE-COUPLED OR FRAME MOUNTED CONFIGURATION 656/756 S-Group Note: For S-Group power frame individual parts see S-Group Power
(.LOWARA. a xylem brand
(.LOWARA a xylem brand New Z6, your 6 11 Stainless Steel Pump ncreased Life Cycle Cost - lower energy consumption No water contamination - No paint, no rust High sand handling capability 100 g/m 3 High
GB REPAIR PARTS REPAIR PARTS RGB R3
GB REPAIR PARTS REPAIR PARTS RGB R3 GB NUMBERING SYSTEM The various versions of the Series GB are identified by a product code number on the pump label. This number is also the catalog number for the pump.
SERIES WC & WCS. Watchman Series & WCS Condensate Units. Replacement Parts for. Hoffman PARTS LIST DN0436. Hoffman Pump
Hoffman PARTS LIST DN06 REVISION B Watchman Series WC Cast Iron Receiver Single or Duplex Replacement Parts for Watchman Series WCS Steel Receiver Single or Duplex Watchman Series WC & WCS Condensate Units
GB REPAIR PARTS REPAIR PARTS RGB R2
GB REPAIR PARTS REPAIR PARTS RGB R2 GB NUMBERING SYSTEM The various versions of the Series GB are identified by a product code number on the pump label. This number is also the catalog number for the pump.
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R1
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R1 TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...1 NPE Seal Chart (Part of Numbering System)...1 Parts List...2 Optional Components...2
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Table of Contents STEAM TRAPS FLOAT AND THERMOSTATIC SERIES PAGE INVERTED BUCKET SERIES PAGE C 6 B0 H B I B X 6 B 6 8 B 6 0
TECHNICAL BROCHURE BHSJ. Basic Convertible Pump HSJ MULTI-STAGE CONVERTIBLE JET PUMPS - 60 HZ
TECHNICAL BROCHURE BHSJ Basic Convertible Pump HSJ MULTI-STAGE CONVERTIBLE JET PUMPS - 60 HZ FEATURES High Capacity and Pressure: Specifically designed to deliver high capacities at greater pressures.
VSC /VSCS Pumps Technical Brochure
VSC /VSCS Pumps Technical Brochure BX-4C VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION ASTM NO. Casing Cast iron A159 Class G0 Volute cover plate (Outboard)
AquaBoost Packaged Systems
Constant Pressure. Plain and Simple. AquaBoost Packaged Systems BUILT WITH THE QUALITY YOU VE COME TO EXPECT FROM GOULDS WATER TECHNOLOGY BRAQBST AQUABOOST P U M P S T A T I O N S AquaBoost Pump Stations
33GS, 40GS, 55GS, 60GS, 75GS & 80GS GPM, 1 10 HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B33-8GS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
Flygt 2600 sludge pump series. Maximize uptime with versatile submersible pumps
Flygt 26 sludge pump series Maximize uptime with versatile submersible pumps Introduction Moving sludge and other liquids calls for versatility Construction/Tunneling Site drainage with solids handling
Marlow Series Prime Line
REPAIR PARTS RPRIMELINE Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS REPAIR PARTS Prime Line M2P M4P Pumps 27 50 49 27 54 1 8 10 6 17 4 67 5 24 37 63 53 51 2 7 46 2 PAGE 2 Prime Line 2" Pump
Flygt Parts List
Flygt 260.7 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification of
The ResiBoost allows a constant set pressure regardless of demand for maximum comfort. Energy savings are the result of the precise speed control.
ResiBoost RESIBOOST IS A VARIABLE FREQUENCY DRIVE FOR CONSTANT PRESSURE SYSTEMS. RESIBOOST AUTOMATICALLY CONTROLS THE SPEED OF THE PUMP WHILE KEEPING THE PRESSURE IN THE SYSTEM CONSTANT The ResiBoost allows
e-sv REPAIR PARTS REPAIR PARTS ReSV R2
e-sv REPAIR PARTS REPAIR PARTS ReSV R2 Table of Contents Numbering System for 1 22SV Liquid End Only..........................................................3 Numbering System for 33 125SV Liquid End
Flygt Parts List
Flygt 2670.80 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification
TECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
INSTRUCTION MANUAL AC2516 REVISION D INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER S USE. Series 1580 In-Line Mounted Centrifugal Fire Pumps
INSTRUCTION MANUAL AC2516 REVISION D INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER S USE. Series 1580 In-Line Mounted Centrifugal Fire Pumps PUMP LOCATION Locate the pump so there is sufficient room
B&G Series e-60 Cast Iron Circulating Pumps
Toll Free: 800.772.2099 Order Online: Fax: 651.774.7156 Sales@StateSupply.com B&G Series e-60 Cast Iron Circulating s Please visit StateSupply.com to view pump related detailed capacity curves. Upgraded
6" Single Phase Motors 6-10" Three Phase Motors
TECHNICAL BROCHURE BCP6-10MTR R2 FEATURES SINGLE PHASE: Single Phase, 6 motors available in 5 15 HP, 230 volt models. Require Control Boxes as shown on Order Number chart. THREE PHASE: Three Phase, 6,
Flygt propeller pumps. For cost-effective transport of large volumes
Flygt propeller pumps For cost-effective transport of large volumes Introduction Compact, adaptable, easy-to-install propeller pumps Broad capacity range Ratings up to 578 kw or 775 hp Flow up to 7200
Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
50 Hz. FCH-FCTH Series VARIABLE SPEED IN-LINE CIRCULATOR PUMPS DIMENSIONS AND WEIGHTS
50 Hz FCH-FCTH Series VARIABLE SPEED IN-LINE CIRCULATOR PUMPS DIMENSIONS AND WEIGHTS FCEH SERIES 2 FCEH SERIES PUMP TYPE DIMENSIONS (mm) B H L k DNA DNM a e h1 h2 x b1 max kg FCEH 40-125/07/D 40 40 70
Get-A-Quote on Your Bell & Gossett e-1510 Pump
Get-A-Quote on Your Bell & Gossett e- e- Identification Guide Need a New e- Series? Need it ped Fast? In Bell & Gossett upgraded the old pump to the new e pump. Changes include the re-design of the volute
50 HZ. Ready DURABLE, LIGHTWEIGHT AND EASILY SERVICEABLE SUBERSIBLE SUBMERSIBLE PUMPS.
50 HZ Ready DURABLE, LIGHTWEIGHT AND EASILY SERVICEABLE SUBERSIBLE SUBMERSIBLE PUMPS. Multipurpose. Multiple use. Made for the duration. Whether it s for construction or industrial sites, manholes or emergency
Marlow Series Cast Iron Swimming Pool Pumps
INSTRUCTION MANUAL SECTION 360A AC1683 REVISION C INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER'S USE. Marlow Series Cast Iron Swimming Pool Pumps 3B28EC 3B32EC PLEASE FILL IN DATA FROM YOUR PUMP NAMEPLATE
REPAIR PARTS RJETPARTS R1. Jet Pump REPAIR PARTS
REPAIR PARTS RJETPARTS R1 Jet Pump REPAIR PARTS JETS JRS... 3 JRD... 4 JRSG... moved to obsolete book J+ and JS+... 5 JB... moved to obsolete book HSJ... 6 VJ... 7 SJ... GT Irri-Gator... 9 BF03S...10 The
EXPERT SERVICE & GENUINE PARTS. Everything it takes to keep you up and running
EXPERT SERVICE & GENUINE PARTS Everything it takes to keep you up and running Peace of Mind from the Original Service Experts At Xylem, we know what it takes to set a higher standard. All of our products
L6W - L8W - L10W - L12W Series LOWARA REWINDABLE MOTORS
L6W - L8W - L10W - L12W Series LOWARA REWINDABLE MOTORS Lowara Rewindable Motors Diameters 6 to 12 L6W-L8W-L10W-L12W The choice of materials and the robust design ensures optimum operating performance,
WHOLESALER PRICE SHEET
PRICE SHEET WHOLESALER PRICE SHEET WPS-518 Effective May 14, 2018 Replaces Price Sheet WPS-1217 Dated December 11, 2017 Minimum Billing: $125.00 These prices supersede all other quotations and are subject
Aquavar SPD Plus SIMPLEX VARIABLE SPEED SUBMERSIBLE AND ABOVE GROUND PUMP CONTROLLER BRSPDP R2
SIMPLEX VARIABLE SPEED SUBMERSIBLE AND ABOVE GROUND PUMP CONTROLLER BRSPDP R2 SPD Plus Do you want to simplify your commercial pumping system and save energy? CentriPro SPD Plus variable speed, constant
Bell & Gossett Series 1510 Centrifugal Pumps
Learn How To Repair On-Line: the www.statesupply.com Bell Gossett 50 Series Email: s Sales@StateSupply.com Bell & Gossett Series 50 Centrifugal s Great Pricing on 50 s! s in Two-Days or Less! 50 Dimension
TECHNICAL BROCHURE BSPDDRIVE. Aquavar SPD (Single Pump Drive) SIMPLEX VARIABLE SPEED PUMP CONTROLLER FOR SUBMERSIBLE AND CENTRIFUGAL PUMPS
TECHNICAL BROCHURE BSPDDRIVE C U L US Aquavar SPD (Single Pump Drive) SIMPLEX VARIABLE SPEED PUMP CONTROLLER FOR SUBMERSIBLE AND CENTRIFUGAL PUMPS Aquavar SPD variable speed, constant pressure pump controller
LET S CHANGE THE WAY WE SPEAK EFFICIENCY
LET S CHANGE THE WAY WE SPEAK EFFICIENCY Lowara Smart Pump Range PERMANENT MAGNET MOTORS WITH EMBEDDED DRIVE AND HIGH-EFFICIENCY HYDRAULICS Thinking efficiency? Start with smart systems. It s time to think
Flygt Parts List
Flygt 2870.80 Parts List Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data plate...3 2.3 Product
Flygt 2600 sludge pump series MAXIMIZE UPTIME WITH VERSATILE SUBMERSIBLE PUMPS
Flygt 26 sludge pump series MAXIMIZE UPTIME WITH VERSATILE SUBMERSIBLE PUMPS INTRODUCTION Moving sludge and other liquids calls for versatility Construction/Tunneling Site drainage with solids handling
PUREFLO 21 4-CHAMBER DIAPHRAGM PUMPS
PUREFLO 21 4-CHAMBER DIAPHRAGM PUMPS JABSCO S PUREFLO 4-piston diaphragm pump is designed to be used in pharmaceutical, biotech, food or cosmetic applications. The design complies with the very stringent
3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
LNT..H with HYDROVAR (HVL range)
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 LNT..H with HYDROVAR (HVL range) LNTH-HVL Rev. B Ed.09/2016 (EN) LNT..H SERIES (e-lnt WITH HYDROVAR) Background and
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
SRC 311. Technical Specification
SRC 311 Technical Specification Technical Specification Environment Ambient temperature Activity C ( F) Operation -1 4 (14 14) Operation (de-rated) maximum (122) Storage -4 6 (-4 14) Altitude Humidity
Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
Flygt low-speed mixers. outstanding efficiency
Flygt low-speed mixers outstanding efficiency Introduction Energy-efficient mixing Advantages of Flygt low-speed mixers Rising to the mixing challenge All mixing applications require varying degrees of
GS Series. with new controller SM30
GS Series Sensorpress Booster Systems with new controller SM30 GS Series The GS range of fixed speed booster setsincludes models with 2 to 3 electric service pumps, and an additional jockey pump able to
Blockpumps. Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858
Blockpumps Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858 Technical Data Performance: Capacity up to 450m 3 /h (1540USgpm) Head up to 150m (280feet) Speed up to 2950/3550rpm Pump Sizes: DN 25 up
3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
Aquavar ABII TECHNICAL BROCHURE BAQUABII R2 VARIABLE SPEED CONSTANT PRESSURE SYSTEMS
TECHNICAL BROCHURE BAQUABII R2 * Available up to 1 GPM systems Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS 1 and 2 HP, 1AB2 and 2AB2 Variable Speed Controllers 1AB2 and 2AB2 Prewired Pump/Controller
Pure performance STEADY 1300 SERIES - 50HZ
Pure performance STY 13 SRIS - 5HZ vailable SY TO SLT, LOS T HN, RIHT PUMP OR YOUR NS Value for money IINT, POWRUL Reliable SOLIS HNLIN, ONTINUOUS RUNNIN 2 Readily available pure performance pumps Steady
Pure performance STEADY 1300 SERIES - 60HZ
Pure performance STY 13 SRIS - 6HZ vailable SY TO SLT, LOS T HN, RIHT PUMP OR YOUR NS Value for money IINT, POWRUL Reliable SOLIS HNLIN, ONTINUOUS RUNNIN 2 Readily available pure performance pumps Steady
Endsuction Pumps. Vogel Series LS, LC, LCP
Endsuction Pumps Vogel Series LS, LC, LCP Design LS Technical Data Performance Range: m Capacity up to 4600m 3 /h (20.250 USgpm) m Head up to 170m (560 feet) m Speed up to 1750 rpm Sizes: m DN 125 up to
A3b.2 October, 2013 Supercedes June, 2013 INLINE CENTRIFUGAL PUMPS REPLACEMENT PARTS GUIDE PACO TYPE VL, VLS, VLF
INLINE CENTRIFUGAL PUMPS REPLACEMENT PARTS GUIDE PACO TYPE VL, VLS, VLF This guide is valid for all PACO products beginning with product codes 16, 17 and 127 only. See back cover for explanation and identification.
The Flygt N-technology pump series for water and wastewater
The Flygt N-technology pump series for water and wastewater HIGH EFFICIENCY WITH CLOG-FREE PERFORMANCE No clogging. No wasted energy. Just trouble-free pumping Our Flygt N-pumps (1.3 kw 680 kw) are designed
Berkeley Cast Iron Impeller B6ZPL ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II
B6ZPL Flanged Case, Packing Construction Page 350. 80B 80B 3 B509 0 -/4" 6."x8.5" M078 B5 0 3 -/4" 6."x8.5" M078 B548 5 3 -/4" 7.56"x8.56" M079 B54 0 3 -/4" 8.00"x9.00" M04348 7 80A 80A 6 Case, Volute
Fire Pump Systems. For the protection of life and property, A-C Fire Pump offers package systems that meet every fire protection need.
Fire Pump Systems For the protection of life and property, A-C Fire Pump offers package systems that meet every fire protection need. 2C11829 A-C Fire Pump Systems and Professional Fire Protection... A
HYDROVAR INCREASED FLEXIBILITY AND CONTROL WITH NEW GENERATION
HYDROVAR INCREASED FLEXIBILITY AND CONTROL WITH NEW GENERATION HYDROVAR, the modern variable speed pump drive is taking pumping to a new level of flexibility and efficiency. Motor or wall mountable More
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y PS For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative
Replacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
PARTS LIST SERIES 5400
File No. 6052.227 Date: September 29, 2004 Supersedes: 6052.227 Date: October 28, 2003 SEWAGE PUMP FOR PUMPS PRIOR TO SERIAL NUMBER 71854 OLD DESIGN 5400 SEWAGE PUMP PARTS IDENTIFICATION ITEM DESCRIPTION
Bulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program
Bulletin BX-4C Bell & Gossett VSC /VSCS Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Program VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION
CENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES
FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
SPLIT-COUPLED INLINE PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE VLSE
SPLIT-COUPLED INLINE PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE VLSE This guide is valid for all Grundfos CBS Inc. products beginning with product code 28 only. While Paco In-Line
Volute Casing Pumps LSN. according to iso 2828 / ISO 5199
Volute Casing Pumps LSN according to iso 2828 / ISO 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
Domestic Pump 2 NPSH Horizontal Pumps Series HB17, HB35, DB, DB-F
INSTRUCTION MANUAL DN0141 REVISION E Domestic Pump 2 NPSH Horizontal Pumps Series HB17, HB35, DB, DB-F TM TM Series HB and DB only TM Series DB-F only TM DESCRIPTION These horizontal end suction pumps
Flygt /180/280/290. Parts List
Flygt 3201.091/180/280/290 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification
Flygt 3153, 50Hz. Technical Specification
Flygt 3153, 5Hz Technical Specification Table of Contents Table of Contents F-pump, Standard Motor... Product description... Motor rating and performance curves...4 F-pump, Premium Efficiency Motor (IE3)...
B/M No. Shaft Kit available for this model, P/N B Refer to Supplement-C of this section for list of components included with kit.
BJQBM Page 0. Date March 4, 03 Supersedes 0/0/04 8B 3 3C 8 B/M Mtg. Spline B0 H0598 M083 -/-0T 3" B08 H059 M083 -/-0T 3" B08 3 H059 M083 -/-0T 3" B08 4 H0595 M083 -/-0T 3" Kit available for this model,
Taco CI Series End Suction, Base Mounted Pumps
Taco CI Series End Suction, Base Mounted Pumps Taco CI Series Pumps are similar to the Bell & Gossett 1531 series of base mounted pumps. Used in commercial, industrial and institutional applications where
PARTS LIST SERIES 5240
File No. 6052.123 Date: January 6, 2003 Supersedes: 6052.123 Date: June 1, 1996 SUMP PUMP FOR PUMPS SERIAL NUMBER 71854 AND LATER NEW DESIGN 5240 SUMP PUMP PARTS IDENTIFICATION ITEM DESCRIPTION PAGE ITEM
100H, 150H, 225H, 275H
TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the
TECHNICAL BROCHURE BMPVN MPVN HIGH PRESSURE MULTI-STAGE PUMPS
TECHNICAL BROCHURE BMPVN MPVN HIGH PRESSURE MULTI-STAGE PUMPS A FULL RANGE OF PRODUCT FEATURES Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum speed up to RPM Sizes: From "
INSTRUCTION MANUAL P81630 INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER S USE. Series VSC and VSCS Base Mounted Centrifugal Pumps
INSTRUCTION MANUAL P81630 Revision E INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER S USE. Series VSC and VSCS Base Mounted Centrifugal Pumps (TO BE USED IN CONJUNCTION WITH VSC PARTS LIST CONTAINING
ITT. AC Series 8300 Split Case Pumps. A-C Pump. Commercial Water. A-C Pump is a brand of ITT Corporation. Engineered for life
AC Series 83 Split Case Pumps is a brand of ITT Corporation. Engineered for life Engineering Specification for AC Series 83 base mounted double suction pumps Double Suction, Horizontal Split Case Pumps
Flygt compact mixers. reliable versatility, high efficiency
Flygt compact mixers reliable versatility, high efficiency Introduction Compact mixing for any requirement Advantages of Flygt compact mixers Rising to the mixing challenge All mixing applications require
Berkeley Cast Iron Impeller B6EXQBH SAE ENGINE MOUNT. Flanged Case, Packing Construction. Table I. Page Date March 4, 2013 Supersedes 01/01/04
BEXQBH Page. 8 83 84 ( X scale ) 3 3 5A 8 B/M Mtg. Spline B00 H05398 H053 -/-0T 3" Kit available for this model, P/N B9. Refer to Supplement-C of this section for list of components included with kit.
TYPE PC Propeller Condensate Pumps
SHIPPENSBURG PUMP CO. INC. P.O. BOX 279, SHIPPENSBURG, PA 17257 PH 717-532-7321 FAX 717-532-7704 WWW.SHIPCOPUMPS.COM BULLETIN 103 Revised 8/17 TYPE PC Propeller Condensate Pumps with Cast Iron Receivers