C Series Valves C24 1-1/4 NPT C23 1 NPT C22 3/4 NPT. C22/C23/C24 Series. Stainless Steel Off-Line Brass Off-Line. Brass In-Line.
|
|
|
- Emma Newton
- 6 years ago
- Views:
Transcription
1 C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies Used with any positive displacement pump 78 United States Instant Information: United Kingdom
2 C Series Valves C Series Hydra-Cell Valves bypass system fluid to prevent excess system pressure. When a system discharge is completely closed such as a closed spray gun, closed valved or plugged nozzle the Hydra-Cell Valve bypasses the total system fluid flow. They also balance system pressure for multiple-gun operations. C24 1-1/4 NPT The Hydra-Cell Valve design is simple: a tapered plunger with a valve seat. When excess pressure overcomes the adjustable spring pressure on the plunger, the plunger lifts off the seat, allowing fluid to bypass and reduce system pressure. When a Hydra-Cell Valve is mounted in the discharge line, its modified flow-through design reduces wear on the plunger and seat. Baffles on either side of the plunger and seat extend life by directing the flow around these internal components. For service, simply remove the top of the body and replace the worn internal components. Hydra-Cell Valves can be serviced in place wihtout removing any fittings or plumbing. C23 1 NPT C22/C23/C24 Series C22 3/4 NPT C22, C23, and C24 Series Hydra-Cell Regulating Valves are available in a choice of stainless steel, nickel alloy or solid brass materials and accommodate 3/4 to 1-1/4 NPT plumbing. Heavy-duty construction Flow-through design Immediate response Brass In-Line Stainless Steel Off-Line Brass Off-Line C46 Series C46 Series Valves are available in a choice of stainless steel or solid brass materials and accommodate 3/8 NPT plumbing. Heavy-duty construction Flow-through or off-line design Quick response United States Instant Information: United Kingdom 79
3 C22/23/24 Series Valves C-22 with 3/4 NPT Ports Configuration AA AB AC 6.0 (152.4) 1.75 (44.5) Capacity Maximum Minimum gpm I/min gpm I/min C C C Pressure Range Model Configuration psi AA AB AC AE C C C bar C C C Max Temperature 200 F and Ports C-22 3/4 NPT C-23 1 NPT C /4 NPT Weight C-22 3 lbs (1.3 kg) C-23 6 lbs (2.7 kg) C lbs (4.5 kg) 3/4" NPT (3 places) 2.2 (55.9) Configuration AE 3/4" NPT (3 places) 3.4 (86.4) 3.4 (86.4) 1.75 (44.5) 6.44 (163.6) 2.2 (55.9) 80 United States Instant Information: United Kingdom
4 C22/23/24 Series Valves C-23 with 1 NPT Ports C-24 with 1-1/4 NPT Ports 7.0 (178) 9.0 (229) 1" NPT (3 places) 4.8 (122) 1.8 (45.7) 2.75 (69.9) 1-1/4" NPT (3 places) 2.8 (71.1) 5.4 (137.2) 3.3 (83.8) Installation Guidelines C Series Valves are installed in the discharge line of the pump between the pump and any shut-off device, valve or spray gun. ed fluid should return to the tank or inlet plumbing. Do not install a shut-off device of any kind in the bypass line. When operating as a pressure-regulating relief valve, 10% of the valve s rated flow should be bypassed at all times. Check the system periodically to ensure this requirement is met. Failure to do so may result in pressure spikes and premature system wear. When used as a pressure regulator, system pressure will increase approximately 10% when the system is fully bypassed. Consult operating manual for specific ratings. United States Instant Information: United Kingdom 81
5 C22/23/24 Series Valves Materials of Construction C22, C23 and C24 Series Valves are manufactured in a choice of heavy-duty materials to meet specific plumbing needs. Valve Bodies/Tops Brass Nickel Alloy (Hastelloy Remelt, CMW12D) Valve Seats 17-4 Stainless Steel Hastelloy C Tungsten carbide O-Rings/Seals EPDM/Teflon Buna-N Viton /Teflon Plungers 17-4 Stainless Steel Hastelloy C Tungsten carbide 82 United States Instant Information: United Kingdom
6 C22/23/24 Series Valves Ordering Information 1 2 C 2 A 3 A complete C22/23/24 Series Model Number contains 11 digits including 8 customer-specified design options: for example C22DABNSSEF Configuration C gpm ( l/min) C gpm ( l/min) C gpm ( l/min) 5 Pressure Range A psi ( bar) B psi ( bar) C ( bar) E ( bar) Model C22 only 6 Bodies/Tops Material B Brass H Nickel Alloy (Hastelloy Remelt, CMW12D) S 7 O-Rings/Seals E EPDM/Teflon N Buna-N V Viton /Teflon 8 Valve Seats R 17-4 Stainless Steel S H Hastelloy C T Tungsten carbide 9 Plungers R 17-4 Stainless Steel S H Hastelloy C T Tungsten carbide 10 Seat Size E C-22 J C-23 N C Port Size F C-22 (3/4 ) G C-23 (1 ) H C-24 (1-1/4 ) United States Instant Information: United Kingdom 83
7 C46 Series Valves C-46 for Off-Line Mount (4.75) Seat I.D (57.2) 3/8 NPT Ø0.878 (22.3) Capacity Maximum Minimum gpm I/min gpm I/min C-46 (Off-Line) C-46 (In-Line) Pressure Range Low Spring psi ( bar) Medium Spring psi ( bar) Standard Spring psi ( bar) Max Temperature 180 F and Ports Weight 3/8 NPT 12 oz (0.33 kg) Materials of Construction C46 Series Valves are manufactured in a choice of heavy-duty materials to meet specific pumping needs. C-46 for In-Line Mount 3/8 NPT 1.00 (25.4) 1.00 (25.4) (22.3) (0.00) (16.7) 3/8 NPT 4.50 (114.3) Max. 3/8 NPT Bodies Brass Piston Valve Seat O-Rings EPDM Buna-N Viton Piston Seal EPDM Buna-N Viton Spring Low, Medium or Standard Chrome Vanadium-plated 3/8 NPT 2.00 (50.8) 84 United States Instant Information: United Kingdom
8 C46 Series Valves Ordering Information A complete C46 Series Model Number contains 11 digits including 4 customer-specified design options: for example C46AABESSEE C 4 6 S S E E Mounting Design A In-Line B Off-Line Pressure Range (Spring Selection) A Low Spring psi ( bar) B Medium Spring psi ( bar) C Standrard Spring psi ( bar) Body Material B Brass S O-Rings E EPDM N Buna-N V Viton United States Instant Information: United Kingdom 85
9 When we say Simply Built to Last, we mean it! Wanner Engineering Hydra-Cell valves have proven their performance and reliability in some of the toughest industrial equipment and processes. Applications Hot fluids Reclaim water Corrosive fluids Slurries Abrasives Liquid gases Wettable powders Fertilizers Capacity Pressure Range Cutting fluids Viscous fluids Ultrapure fluids Chemicals Adhesives Soap solutions Salt water and many more... Features Various seat materials available: stainless or brass bodies, PTFE diapragm, etc. Made in America Heavy-duty industrial construction Accurate, repeatable Flow-through design Minimal pressure surge Smooth, chatter-free bypass No external springs or moving parts Use with any positive displacement pump Immediate response Adjustable, easy to service Max Temperature 200 F and Ports Weight Maximum: 14 gpm (53 l/min) Minimum: 1 gpm (3.8 l/min) Superior Design. The Hydra-Cell C62 Valve design is simple: a tapered plunger with an attached diaphragm. When excess pressure overcomes the adjustable spring pressure on the plunger, the plunger lifts off the valve seat, allowing fluid to bypass and reduce system pressure. When a Hydra-Cell Valve is mounted in the discharge line, its modified flow-through design reduces wear on the plunger and seat. For service, simply remove the top of the valve and replace the worn internal components. Hydra-Cell Valves can be serviced in place without removing any fittings or plumbing. Configuration A: psi ( bar) Configuration B: psi ( bar) 3/4 NPT (BSPT) 4 lbs (1.8 kg) Materials of Construction Attention to detail. Wanner Engineering doesn t stop with a great design. We will custom fit your valve with the materials best suited for your specific application. Bodies/Tops Material Brass Nickel Alloy (Hastelloy Remelt, CMW12D) O-Rings/Diaphragms PTFE/PTFE Viton /PTFE Valve Seats Hastelloy C 17-4 Stainless Steel Plungers Hastelloy C 17-4 Stainless Steel C62 Series Plunger Assembly Dimensions 3/4" NPT (BSPT) 2.30 (58.4) Valve Seat 2.72 (69.1) Guide Sleeve Diaphragm in (mm) 1.68 (42.7) 8.62 (219) Wanner Engineering, Inc Chestnut Avenue, Minneapolis, MN USA Wanner International Ltd. Grange Court, Grange Road (612) FAX (612) Tongham, Surrey GU10 1DW, England Toll Free FAX (USA only) (800) sales@wannereng.com Website: Tel +44 (0) FAX Tel +44 (0) sales@wannerint.com Document Fax Back System: (510) Printed in USA 9/01 5k
C Series Valves C24 1-1/4 NPT/BSPT C23 1 NPT/BSPT C22 3/4 NPT/BSPT. C22/C23/C24 Series (See page 88)
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
INDUSTRIAL PUMPS PARTS MANUAL. MODELS: C-22, C-23, C-24 Bypass Pressure Regulating Valves WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries about this pump, please mention
Hydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
WANNER ENGINEERING INC
Industrial Pumps WANNER ENGINEERING INC Durability, performance and simplicity of design make Hydra-Cell pumps the optimum choice for the widest range of pump applications. When we say Simply Built to
Models: C22D, C23D, C24D
Installation & Service C22-991-2401A Models: C22D, C23D, C24D Bypass Pressure Regulating Valves with BSPT Threaded Ports IMPORTANT Record your pump model number and serial number here for easy reference:
MODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
INDUSTRIAL PUMPS PARTS MANUAL MODELS: M-03 D-03 M-23 M-24 G-03 G-13 WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: INDUSTRIAL PUMPS MODELS: M-03 D-03 M-23 M-24 G-03 G-13 Model No. Serial No. Date of Purchase When ordering
Models: G-25, H-25 With Non-Metallic Pump Head
Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US
Models: G-25, H-25 With Metallic Pump Head
Parts Manual G5-99-40C Models: G-5, H-5 With Metallic Pump Head W09B WANNER ENGINEERING, INC. 04 Chestnut Avenue, Minneapolis, MN 55403 TEL: () 33-58 FAX: () 33-937 TOLL-FREE FAX [US only]: (800) 33-8
Models: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
Models: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
INDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
T100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
F/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump
f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with
T100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
Model: D-10. Parts Manual D B. with non-metallic pump head WANNER ENGINEERING, INC. IMPORTANT
Parts Manual D10-991-2403B Model: D-10 with non-metallic pump head IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering
MODEL: G-25 WITH METALLIC PUMP HEAD
PARTS MANUAL G25-991-2402B MODEL: G-25 WITH METALLIC PUMP HEAD IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
Versatile, Reliable Pumps for a Wide Range of Applications D66 Series
Versatile, Reliable Pumps for a Wide Range of Applications D66 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
Durability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications.
Durability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications. When we say "Simply Built to Last", we mean it! Wanner Engineering Hydra-Cell
INDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts
H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions
Parts Manual D03-991-2406 Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
D/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that
Condensed Catalog. Seal-less Pumps
Condensed Catalog Seal-less Pumps Hydra-Cell F/M/D/H Series Seal-less Pumps Hydra-Cell T and Q Series Pumps Hydra-Cell P Series Seal-less Metering Pumps Due to the Wanner Engineering Continuous Improvement
T100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
T100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump
G15 Series API bar (2500 psi) for Metallic Pump Heads. G15 for horizontal installations shown with Stainless Steel pump head.
G15 Series Maximum Flow Rate: Maximum Pressure: 58.7 l/min (15.5 gpm) 172 bar (2500 psi) for Metallic Pump Heads API 674 ATEX G15 for horizontal installations shown with Stainless Steel pump head. G15
Versatile, Reliable Pumps for a Wide Range of Applications M03 Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.
G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu
Versatile, Reliable Pumps for a Wide Range of Applications M03 Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16
G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
G04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head
G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel
C22A Parts. Brass Body. C22AA, C22AB, and C22AC. No. Part Number Description Pump
C22A Parts C22AA, C22AB, and C22AC 1 C22-004-1005 Adjusting bolt, Pressure range A...1 C22-004-1006 Adjusting bolt, Pressure range B, C...1 2 C22-005-1000 Jam nut...1 3 C22-015-2000 Screw, Cap, 5/16 x
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
D/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
MT8 Pump. Triplex Metering Pump with Pulse-Free Linear Flow
Maximum Flow Rate: Minimum Flow Rate: Maximum Pressure: 8.00 gph (30.28 lph) 0.06 gph (0.227 lph) 3500 psi (241 bar) MT8 with Stainless Steel pump head Hydra-Cell Metering Solutions pumps exceed API 675
Pulsation Dampeners NEW! Wanner Engineering Inc
Pulsation Dampeners NEW! Wanner Engineering Inc Pulsation Dampeners Positive Displacement (PD) pumps create pulsation and hydraulic shock due to the reciprocating nature of their stroking action, potentially
G03 Mono-Block Series
G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)
G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
T100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
P200 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional)
P200 Metering Pump Installation & Service P200-991-2400A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional) 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
T100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
Valve Accessories NEW! Wanner Engineering Inc
Valve Accessories NEW! Wanner Engineering Inc Back Pressure Valves Diaphragm Back Pressure Valves enhance the performance of precision metering systems by applying a continuous back pressure to the EPM
T100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
Selection Guide for P Series Pump Accessories & Options
Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders
P100 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional)
P100 Metering Pump Installation & Service P100-991-2400A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional) 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937
F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
SD Series. Slurry Duty Pumps. Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to:
SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify maintenance Extend pump life Provide quiet
P300 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC.
P300 Metering Pump Installation & Service P300-991-2400A WANNER ENGINEERING, INC. 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937 TOLL-FREE FAX [US only]: (800) 332-6812
P400 Metering Pump. Installation, Operation & Maintenance P C. Metallic pump shown W0014B
TM P400 Metering Pump Installation, Operation & Maintenance P400-991-2400C W0014B Metallic pump shown 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US
MT8 Metering Pump. Installation, Operation & Maintenance Chestnut Avenue, Minneapolis, MN 55403
TM MT8 Metering Installation, Operation & Maintenance 190-1204 Chestnut Avenue, Minneapolis, MN 55403 T e l : (612) 3 32-5 6 81 F a x : (612) 3 32-6 9 37 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
High-Pressure Machine Tool Coolant Pumps with Superior Handling of Abrasive Fines and Metal Particles. Machine Tool Coolant
High-Pressure Machine Tool Coolant Pumps with Superior Handling of Abrasive Fines and Metal Particles Machine Tool Coolant High-Pressure Coolant Delivery Hydra-Cell Pumps for Machine Tool Coolant Compact,
G20 Series. G20 Close-coupled with Brass pump head ATEX. G20 Version 1 01/15
G20 Series Maximum Flow Rate: 3.8 l/min (1.0 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads AEX G20 Close-coupled with Brass pump head G21
SD Series. Slurry Duty Pumps. sd - Slurry duty hydra-cell diaphragm pump
sd - Slurry duty hydra-cell diaphragm pump SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify
Hydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
Models: D66. Installation, Operation & Maintenance A1
Installation, Operation & Maintenance 210-800A1 Models: D66 W0577A 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
INDUSTRIAL PUMPS. Models: D-10, G-10 INSTALLATION & SERVICE WANNER ENGINEERING, INC.
INSTALLATION & SERVICE INDUSTRIAL PUMPS Models: D-10, G-10 WANNER ENGINEERING, INC. 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937 TOLL-FREE FAX [US only]: (800) 332-6812
Models: G25, H25. Installation, Operation & Maintenance G C W0452
Installation, Operation & Maintenance G25-991-2400C Models: G25, H25 W0452 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
INDUSTRIAL PUMPS. Models: D-12, G-12 INSTALLATION & SERVICE WANNER ENGINEERING, INC.
INSTALLATION & SERVICE INDUSTRIAL PUMPS Models: D-12, G-12 WANNER ENGINEERING, INC. 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937 TOLL-FREE FAX [US only]: (800) 332-6812
G03 Series Dosing Range
G03 Series Dosing Range Maximum Flow Rate: Maximum Pressure: up to 462 l/hr (122 gph) up to 103 bar (1500 psi) for Metallic Pump Heads up to 24 bar (350 psi) for Non-metallic Pump Heads AEX G13-M2M with
M03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
Section H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.
Models: D-04, G-04 INSTALLATION & SERVICE D A WANNER ENGINEERING, INC.
INSTALLATION & SERVICE D04-991-2400A Models: D-04, G-04 W0069A WANNER ENGINEERING, INC. 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937 TOLL-FREE FAX [US only]: (800)
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
Models: D35, G35. Installation, Operation & Maintenance D B
Installation, Operation & Maintenance D35-991-2400B Models: D35, G35 W0172B 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
INDUSTRIAL PUMPS INSTALLATION & SERVICE MODELS: D-12 G-12 WANNER ENGINEERING, INC.
INSTALLATION & SERVICE INDUSTRIAL PUMPS MODELS: D-12 G-12 WANNER ENGINEERING, INC. 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937 TOLL-FREE FAX [US only]: (800) 332-6812
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
GUNJET NUMBER AA143-AL-*-10 A C A C
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 2 to 55 bar. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
Electronic Precision Metering. Built to exceed API 675 performance standards with pulse-free linear flow
Electronic Precision Metering Built to exceed API 675 performance standards with pulse-free linear flow Contents Page(s) Introduction....................................... 3 Markets Served.....................................
Available in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw
Type 43L & 43H GunJet Spray Guns AA43 GunJet Designed and built for heavy-duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip-free shutoff and instant
W A N N E R P I S T O N P U M P S
W A N N E R P I S T O N P U M P S The A10FB and A20FB are compact, heavyduty piston pumps and are well adapted to many industrial and agricultural uses including tree spraying, weed and insect spraying,
D15/D17 Series psi (172 bar) for Metallic Pump Heads
15/17 Series Maximum Flow Rate: Maximum Pressure: 15.5 gpm (58.7 l/min) 25 psi (172 bar) for Metallic Pump Heads 15/17 Series Performance Capacities Flow Pressure Model Max. Input rpm gpm l/min Max. Inlet
Model T5 Triplex Power Pump
weatherford Model t5 triplex power pump Pump and Fluid Systems Model T5 Triplex Power Pump Weatherford s Model T5 is a single-acting triplex plunger pump rated at 5 HP in continuous duty service and up
Spray Guns. Choice of Materials and Capacities
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 30 to 800 PSI. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
Oil & Gas Processing. Seal-less Pumps. Reliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace
Oil & Gas Processing Seal-less Pumps Reliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace Pressure Injecting and Mixing Transfer Spraying Metering and Dosing Hydra-Cell
Accurate Metering and Superior Handling of Abrasives in the Manufacture of Engineered Wood Products. Engineered Wood
Accurate Metering and Superior Handling of Abrasives in the Manufacture of Engineered Wood Products Engineered Wood Pressure Injecting and Mixing Transfer Spraying Metering and Dosing Hydra-Cell Pumps
Industrial Pumping Equipment Air-Operated Diaphragm Pumps
Industrial ing Equipment -Operated Diaphragm s 85630 85628 85622 85634 ¼" - 2" -Operated s Basic Design Features Diaphragm pumps are driven by compressed air.the directional air distribution valve and
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05-FLG PRESSURE RELIEF VALVE FLANGED 150#, 300#,
Vehicle Cleaning Products Longest Lasting and Most Reliable Pumps and Accessories
Vehicle Cleaning Products Longest Lasting and Most Reliable Pumps and Accessories Product Quality, Reliability and Support You Expect www.catpumps.com Outruns, Outlasts and Outperforms the Competition.
Model T10 Triplex Power Pump
weatherford Model t10 triplex power pump Pump and Fluid Systems Model T10 Triplex Power Pump Weatherford s Model T10 is a single-acting, triplex plunger pump rated at 10 HP in continuous duty service and
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVi-05 Stainless Steel In-Line Adjustable Pressure Relief
Metering Pumps with Pulse-Free Linear Flow
Metering Pumps with Pulse-Free Linear Flow Hydra-Cell Metering Solutions Contents Page An Extraordinary Metering Pump...3 Applications & Markets Served...4 Operational & Cost Advantages Electronic Flow
Model: T Installation & Service D
Installation & Service 177-999D Model: T-8045 Flange Shown W0499B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937 TOLL-FREE FAX [US only]: (800) 332-6812 www.hydra-cell.com
Metering Pumps with Pulse-Free Linear Flow
Metering Pumps with Pulse-Free Linear Flow Hydra-Cell Metering Solutions Contents Page An Extraordinary Metering Pump...3 Applications & Markets Served...4 Operational & Cost Advantages Electronic Flow
VALVES std $ fp $ fp $
std = standard port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS fp = full port Code No. Part No. Size Price 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364
Car Wash / Pressure Washer
Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask
Model PRH FLG. Stainless Steel 1500# Flange High Pressure Regulator (Reducing Valve) 21 Columbus Avenue Garfield, NJ 07026
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRH04-1500FLG Stainless Steel 1500# Flange High Pressure