Section H Spray Guns. Table of Contents

Size: px

Start display at page:

Download "Section H Spray Guns. Table of Contents"

Corey Park
6 years ago
Views:

1 Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream. All our spray guns are durable and efficient. Many of our guns also offer: Specially designed handles to improve control and reduce operator fatigue. Smooth-pull triggers to enable accurate and consistent flow control. Textured grips to minimize the chance for slippage and accidents. Leak-free operation. A complete line of accessories complements our spray guns. Front shut-off extensions, extensions, inlet/outlet adapters, connectors and strainers are available to ensure easy, trouble-free operation. Table of Contents High Pressure... H3 Low Pressure H5 Low-Medium Pressure... H9 Front Shut-Off Spray Gun s... H11 Spray Gun s... H12 and Outlet Spray Gun Adapters... H16 Spray Gun Swivel Connectors and High Pressure Liquid Strainers... H17 Spray Guns H1

Optimization Tips Never point a spray gun at another person or yourself. Injury can result.

Be sure to use the correct spray gun for your pressure and flow range to ensure safety and achieve maximum performance.

Use tips that match no performance improvements will result from using a tip with a higher capacity than the spray gun.

Always use a check valve or similar bypass valve when using high pressures to ensure safety.

2 Optimization Tips Never point a spray gun at another person or yourself. Injury can result. Use the trigger lock feature when the gun is not in use to avoid accidental discharge. Add an extension and handle to improve spray gun stability. Be sure to use the correct spray gun for your pressure and flow range to ensure safety and achieve maximum performance. The use of steam with spray guns is not recommended. Spray guns are rated for optimal flow rates. Use tips that match no performance improvements will result from using a tip with a higher capacity than the spray gun. Eliminate water hammer and pressure spikes by using an unloader valve. Add a swivel to the hose to ensure easy movement of the spray gun and hose. Always use a check valve or similar bypass valve when using high pressures to ensure safety. Check and tighten fluid connections if necessary to avoid leaks. Use a spray gun with a weep feature to prevent freezing in cold environments. In-line strainers provide filtering to protect gun and purity of sprayed liquid. Proper selection of a spray gun, for your application, will reduce operator fatigue. Trigger Lock Swivel Accessories Check Valve Gun H2

, High Pressure Features and Benefits Ultimate versatility is available with

forged brass valve bodies, Buna-N or Viton stem seals, PTFE valve seats and

Optional weep feature (30A and 70) helps prevent freezing in cold conditions.

3 , High Pressure Features and Benefits Ultimate versatility is available with a complete selection of UniJet spray tips to meet pattern and flow specifications. Available outlet adapters convert any standard thread allowing the attachment of many optional accessories. Standard one-piece nozzles, such as VeeJet flat spray nozzles, can be used when mated with proper adapters. Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions. Sturdy design and materials including nylon handles and trigger guards, forged brass valve bodies, Buna-N or Viton stem seals, PTFE valve seats and stainless steel working parts mean long, productive equipment life. Optional weep feature (30A and 70) helps prevent freezing in cold conditions. 30A PW4000A PW4000AS Spray Guns Optimization Tips See page H2 for optimization tips. Applications Adhesive spraying Lubricating Car wash Paint spray Floor/rug cleaning Pest control High pressure cleaning Pressure wash See Also Accessories s /outlet adapters Swivel connectors AA70 GunJet H3

4 , High Pressure Specifications High Pressure Model Pressure (bar) Capacity (l/min) Temperature F ( C) 30A (93) Outlet Length (cm) Width (cm) Height (cm) Net Weight (kg) THD Special Features Nylon handle/ trigger guard (150) 3/8" NPT or THD Stainless steel body available (150) 3/8" NPT (F) or Easy trigger pull. Stainless steel valve seal and ball (150) 3/8" NPT or THD or 1/4", 3/8" NPT or Nylon handle. Trigger guard. PW4000A (150) 1/4", 3/8" NPT or 1/4", 3/8" NPT or Fatigue-reducing trigger. PW4000AS (150) 3/8" NPT or swivel 1/4", 3/8" NPT or Bottom trigger pivot and inlet swivel. Ordering Info Complete Spray Gun Assembly AA60 3/8 l l GunJet Number H4

5 , Low Pressure Features and Benefits All GunJet low pressure spray guns are designed to meet the special needs of low pressure applications. Versatile GunJet low pressure spray guns are designed for use with a wide variety of spray tips to meet particular pattern and flow specifications. Available outlet adapters convert any standard thread allowing the attachment of many optional accessories. Standard one-piece nozzles, such as VeeJet flat spray nozzles, can be used when mated with proper adapters. Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions. Sturdy design and materials including nylon and polypropylene handles and trigger guards, forged brass valve bodies, Buna-N or Viton stem seals, PTFE valve seats and stainless steel working parts mean long, productive equipment life. Key feature overview for L: For low pressure spot application of chemicals. Features an adjustable metering assembly that enables the applicator to discharge precisely metered volumes from 1 to 16 ml with a single pull of the trigger. Automatically recharges for the next dosage when the trigger is released. Key feature overview for CU150A: For general clean-up applications. Offers versatility and maximum comfort. Features easy-change color-coded spray caps with three flow capacities. Spray pattern can be adjusted from a solid stream to a 50 hollow cone pattern. Available with optional repair kits. Can be ordered in brass or lightweight aluminum with a corrosion-resistant rubber outer cover. Complete line of accessories for PP TriggerJet spray gun: s: 15" (381 mm) or 24" (610 mm). Part number PP. 45 adapter. Part number PPB. Straight adapter. Part number PPB. Adjustable ConeJet spray tip. Part number 5500-PPB. UniJet strainer. Part number PP. Key feature overview for /4F: Provides an adjustable metering assembly which allows the applicator to discharge precisely metered volumes from 1 to 16 ml with a single pull of the trigger. Automatically recharges for the next dosage when the trigger is released. Trigger valve inlet handle options for 36, 4688, 6104, 6466 and 6590 with BSPT (M) inlet connections: Rubber covered handle with a 1/4" NPS (M) hose inlet connection. Part number /8" brass pipe handle. 3/8" ID hose slips easily over the pipe handle. Part number Rubber covered handle with a 3/4" garden hose thread connection. Part number Internal strainer with choice of mesh sizes and a 1/4" NPT or connection. Part number Spray Guns H5

6 , Low Pressure 30L 30L-PP L L CU150A /4F PP Optimization Tips See page H2 for optimization tips. Applications General clean-up Low pressure cleaning Spot application of chemicals See Also Accessories s /outlet adapters Swivel connectors H6

7 , Low Pressure Specifications Low Pressure Model Pressure (bar) Capacity (l/min) Temperature F ( C) Outlet Length (cm) Width (cm) Height (cm) Net Weight (kg) Special Features 30L (93) UniJet THD Nylon handle. Trigger guard. 30L-PP (50) Polypropylene handle. Trigger guard L to 16 ml dosage range 200 (93) Adjustable metering. Auto recharge (150) Trigger activated variable spray pattern (150) 3/8" NPT or Trigger activated variable spray pattern. 30L (93) Uses Quick UniJet caps, seat gaskets and spray tips. Corrosion resistant. CU150A to (93) 1/2" NPT or Changeable spray caps. Adjustable spray pattern solid to 50 hollow cone. Corrosion resistant. Rubber outer cover white or black. Repair and replacement parts available. Also available in aluminum (weight.62 kg). Spray Guns Ordering Info Complete Spray Gun Assembly CU150A AL 22 l l l GunJet Type Code Capacity Complete Spray Gun Assembly PP 1/4 l l l GunJet Type Code H7

8 , Low Pressure Specifications Specialty Low Pressure Pressure (bar) Capacity (l/min) /4F MeterJet to 16 ml /4" NPS or BSPT (M) Outlet UniJet THD Special Features Adjustable metering. Auto recharge. Trigger activated variable spray pattern. Drip-free shut off. Brass body. Stainless steel trigger. Buna-N bumper PP TriggerJet /4" or 3/8" hose or Corrosion resistant polypropylene construction. UniJet strainer available. Durable Viton diaphragm. 36 Trigger Valve /4" or 3/8" NPT or 1/4" or 3/8" NPT or Brass or stainless steel Trigger Valve Brass or stainless steel Trigger Valve Brass or stainless steel Trigger Valve THD Extra long trigger Trigger Valve Extra long trigger. GunJet spray gun used to clean grease from equipment and floor. H8

, Low-Medium Pressure Features and Benefits All are

variety of pattern and flow specifications.

allowing the attachment of many optional accessories.

nozzles, can be used when mated with proper adapters.

comfort even at maximum flow and pressure conditions.

brass or stainless steel inlet bodies, PTFE or nylon

See Also Accessories s /outlet adapters In-line

9 , Low-Medium Pressure Features and Benefits All are designed for use with UniJet spray tips to meet a wide variety of pattern and flow specifications. Available outlet adapters convert any standard thread allowing the attachment of many optional accessories. Standard one-piece nozzles, such as VeeJet flat spray nozzles, can be used when mated with proper adapters. Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions. For safety, trigger guards are designed to prevent accidental discharge. Sturdy design and materials including nickel-plated, brass or stainless steel inlet bodies, PTFE or nylon valve seats and stainless steel stems and brass guides mean long, productive equipment life. Optimization Tips See page H2 for optimization tips. See Also Accessories s /outlet adapters In-line strainers Swivel connectors 23L AA23L H LD 43LC 43HD Spray Guns 43HC Ordering Info Complete Spray Gun Assembly AA23L SS l l GunJet Number Code H9

10 , Low-Medium Pressure Specifications Low-Medium Pressure Model Pressure (bar) Capacity (l/min) Temperature F ( C) 23L (93) 1/4" NPS (M) Outlet UniJet THD Length (cm) Width (cm) Height (cm) Net Weight (kg) Special Features Aluminum alloy handle. PTFE valve seat. Stainless steel stem. Brass guide. Nickel-plated inlet body. AA23L (93) 1/4" NPS (M) Drop adjusting nut. Tapered needle. Captured valve seat. Nickel-plated inlet body. 23H (93) 1/4" NPS (M) /4" NPS (M) or NPT or Drip-free shut-off. Trigger lock (optional) (93) 3/8" NPT or Durable nylon handle/trigger guard. Trigger lock off. 43LD (93) 1/2" NPT or Brass inlet body. 43LC (93) 1/2", 3/4" NPT or 1/2", 3/4" NPT or HD (93) 1/2" NPT or HC (93) 1/2", 3/4" NPT or 1/2", 3/4" NPT or H10

Front Shut-Off s 23L-7676 30L-22425 31-12090 Optimization Tips See page H2 for optimization tips.

Special Features 23L-7676 AA23L-7676 or AA23L-SS- 7676-SS 17 19 200 (93) 1/4" NPS (M) UniJet THD 203, 457, 610, 914, 1219 Brass or 303 Stainless Steel Brass or stainless steel 30L-22425 AA30L-22425

11 Front Shut-Off s 23L L Optimization Tips See page H2 for optimization tips. See Also Data Sheet 7676 Data Sheet 30L Data Sheet Specifications GunJet Model GunJet Plus Type Pressure (bar) Capacity (l/min) Temperature F ( C) Outlet Lengths (mm) GunJet Special Features 23L-7676 AA23L-7676 or AA23L-SS SS (93) 1/4" NPS (M) UniJet THD 203, 457, 610, 914, 1219 Brass or 303 Stainless Steel Brass or stainless steel 30L AA30L (50) AA (93) 1/4" NPS (M) or 203, 457, 610, 914, 1219, 1524, , 457, 610, 914 Brass Brass Brass Brass Drip-free shut-off with valve stem extending full length of extension. Spray Guns Ordering Info Complete Spray Gun Assembly AA23L SS SS l l l l l GunJet Type Code Type Length Code H11

12 Spray Gun s Specifications Gun No. Maximum Pressure (bar) 9004-SS 275 UniJet THD Outlet Special Features Stainless steel /4" NPS (M) liquid recirculating 1/4" NPS (M) liquid recirculating Brass Stainless steel only available in 203 mm length /8" NPT or BSPT (M) Stainless steel or zinc-plated steel Adjustable hand grip /4" NPT or BSPT (M) BSPT (M) or 1/8" NPT or Stainless steel or zinc-plated steel 13781S 138 Mild steel Usually supplied with 7890 inlet cap and hollow cone spray tip (order cap and tip separately). Refer to Data Sheet S 138 Mild steel Usually supplied with 7890 inlet cap and a tungsten carbide spray tip (order cap and tip separately). Refer to Data Sheet A 138 Mild steel Projects spray at 90 angle. 9702C 138 Mild steel Curved body Brass Rubber insulated (1219 mm length not rubber insulated). H12

13 Spray Gun s Specifications Gun No. Pressure (bar) Outlet Special Features UniJet THD Brass Curved, rubber insulated. CP BSPT (M) BSPT (M) Aluminum Brass 17 Brass 203, 305, 457, 610, 762, 914 and 1219 mm Brass (203, 305, 457, 610, 914 and 1219 mm lengths also available in stainless steel) /8" NPT or BSPT (M) Brass Brass (914 mm lengths also available in stainless steel) Curved body. Spray Guns Brass Curved with swivel nozzle body Brass Siphon with adjustable flow Polyester H13

14 Spray Gun s Spray Gun Compatibility No SS /4M /8F 13781S 9702S 9702A 9702C Length Available (mm) 22AUH 24AUA LD / / l l l l l l l l l l l 305 l l l l l l l l l l l 457 l l l l l l l l l l l 610 l l l l l l l l l l l 914 l l l l l l l l l l l 203 l l l l l l l l l l l 305 l l l l l l l l l l l 457 l l l l l l l l l l l 610 l l l l l l l l l l l 914 l l l l l l l l l l l 457 l l 914 l l 36-1/ l* l* l l l l l 914 l* l* l l l l l 457 l* l* l l l l l 914 l* l* l l l l l 254 l l l l l l l l l 406 l l l l l l l l l 1219 l l l l l l l l l 254 l l l l l l l l l 610 l l l l l l l l l 1219 l l l l l l l l l 1524 l l l l l l l l l 254 l l l l l l l l l 610 l l l l l l l l l 1219 l l l l l l l l l 1524 l l l l l l l l l 254 l l l l l l l l l 610 l l l l l l l l l 1219 l l l l l l l l l 1254 l l l l l l l l l 203 l l l l l l l l 457 l l l l l l l l 610 l l l l l l l l 914 l l l l l l l l 1219 l l l l l l l l 203 l l l l l l l l 457 l l l l l l l l 610 l l l l l l l l 914 l l l l l l l l 1219 l l l l l l l l *Use with /4-SSP stainless steel adapter. H14

15 Spray Gun s Spray Gun Compatibility No. Length Available (mm) 22AUH 24AUA LD / / / l l l l CP l l l l 610 l l l l 914 l l l l 203 l l l l l l l l l l l l 610 l l l l l l 914 l l l l l l 203 l l l l l l 305 l l l l 457 l l l l l l l l 762 l l l l 914 l l l l 1219 l l l l l l l l l l 203 l l l l l l 457 l l l l l l l l l l l l 762 l l l l l l 914 l l l l l l 1219 l l l l l l 203 l l l l l l 457 l l l l l l 610 l l l l l l l l l l l l 914 l l l l l l 1219 l l l l l l 1828 l l l l l l l l l l l l l 610 l Spray Guns Ordering Info Complete Assembly SS l l l Type Length Code H15

Spray Gun and Outlet Adapters 7029 3/4" garden hose thread (F) inlet connection 1/2"

connection 3/8", 1/2" NPT or BSPT (M) outlet connection 3/4" garden hose thread (F)

connection 1/8", 1/4", 3/8", 1/2", 3/4" NPT or outlet conn.

UniJet inlet connection THD UniJet outlet connection 1/4", 3/8" NPT or inlet connection

connection Optimization Tips Specifications See page H2 for optimization tips.

Info Data Sheet 14721 Data Sheet 15578 Data Sheet 7599 http:// Spray Gun /Outlet

7029 13212 14269 4676 3/4" garden hose thread (F) 3/4" garden hose thread (F) 3/4"

BSPT (M) 1/4" NPS (F) or 1/4" NPT (F) 1/8", 1/4", 3/8", 1/2", 3/4" NPT or Maximum

6 Brass 70 138 Brass and nickel-plated brass 303 Stainless Steel Complete Adapter

16 Spray Gun and Outlet Adapters /4" garden hose thread (F) inlet connection 1/2" NPT or BSPT (M) outlet connection /4" garden hose thread (F) inlet connection 3/8", 1/2" NPT or BSPT (M) outlet connection 3/4" garden hose thread (F) inlet connection 1/4" NPS (F) or 1/4" NPT (F) outlet connection THD UniJet (F) inlet connection 1/8", 1/4", 3/8", 1/2", 3/4" NPT or outlet conn THD UniJet (F) inlet connection 1/8", outlet connection THD UniJet inlet connection THD UniJet outlet connection 1/4", 3/8" NPT or inlet connection 1/4" NPS (F) outlet connection 1" 14 (M) inlet connection 1/4", 3/8" NPT or outlet connection Optimization Tips Specifications See page H2 for optimization tips. See Also Data Sheet 7035 Data Sheet Data Sheet Data Sheet Ordering Info Data Sheet Data Sheet Data Sheet Spray Gun /Outlet Adapter Model No /4" garden hose thread (F) 3/4" garden hose thread (F) 3/4" garden hose thread (F) THD UniJet (F) Outlet 1/2" NPT or BSPT (M) 3/8", 1/2" NPT or BSPT (M) 1/4" NPS (F) or 1/4" NPT (F) 1/8", 1/4", 3/8", 1/2", 3/4" NPT or Maximum Pressure (bar) 55 Brass 10.4 Brass 8.6 Brass Brass and nickel-plated brass 303 Stainless Steel Complete Adapter Assembly 8.4 Nylon /8 SS l l l Adapter Type Code THD UniJet (F) THD UniJet 1/4", 3/8" NPT or 1/8", 1/4" NPT or THD UniJet 1/4" NPS (F) 275 Nickel-plated steel 55 Brass Nickel-plated brass Polished stainless steel " 14 (M) 1/4", 3/8" NPT or 210 Stainless steel H16

Spray Gun Swivel Connectors and High Pressure

1/4" to 1/2" NPT or BSPT (M) inlet conn.

1/4" to 1/2" NPT or NPS (F) outlet conn.

3/8" 1/4", 3/8" NPT or inlet connection 1/4",

outlet conn. 3/4" garden hose ID inlet conn.

connection 3/4" garden hose thread (F) inlet

17 Spray Gun Swivel Connectors and High Pressure Liquid Strainers /4" to 1/2" NPT or inlet conn. 1/4" NPT or NPS (F) outlet conn. 1/4" to 1/2" NPT or BSPT (M) inlet conn. 1/4" NPS (M) outlet conn. 1/4" to 1/2" NPT or NPS (F) outlet conn. 3/8" NPT or BSPT (M) inlet conn. 3/8" NPT or inlet conn. 1/4", 3/8" NPT or inlet connection 1/4", 3/8" NPT or BSPT (M) outlet connection L /4" NPS (M) inlet connection 1/4" NPS (F) outlet connection 1/2", 5/8", 3/4" garden hose ID inlet conn. (1-3/16" long) 1/2" NPT or BSPT (M) threaded outlet conn. 3/4" garden hose ID inlet conn. (2-7/16" long) 1/2" NPT or BSPT (M) outlet connection 3/4" garden hose thread (F) inlet connection 1/2" NPT (M) threaded outlet conn. Spray Guns GunJet spray gun used in automotive industry to attach backing, foam and fabric to seats. H17

18 Spray Gun Swivel Connectors and High Pressure Liquid Strainers NP /4", 3/8" NPT (M) inlet connection 3/8" NPT or outlet connection 3/8" NPT (M) inlet conn. 3/8" NPS (F) outlet conn. Strainer 1/4" NPS (M) inlet conn. 1/4" NPS (F) outlet conn. Strainer 1/4" NPS (M) inlet conn. 1/4" NPS (F) outlet conn SS Optimization Tips See page H2 for optimization tips. See Also swivel nut branch tee is used with AA26AUH electric automatic spray guns to provide liquid recirculation. Data Sheet Data Sheet Data Sheet 9765 Data Sheet Data Sheet Data Sheet 8510 Data Sheet 9770 GunJet spray gun used to clean floors and equipment. H18

19 Spray Gun Swivel Connectors and High Pressure Liquid Strainers Specifications Model No. Outlet Maximum Pressure (bar) Temperature F ( C) Special Features 1/4" to 1/2" NPT or NPS (F) /4" to 1/2" NPT or BSPT (M) (82) Brass Leakproof hose, 360 swivel eliminates hose kinking and operator fatigue. 1/4" NPS (M) 1/4" to 1/2" NPT or NPS (F) /8" NPT or BSPT (M) 3/8" NPT or (93) Brass or stainless steel /4", 3/8" NPT or 1/4", 3/8" NPT or BSPT (M) (93) Brass /4" NPS (M) 1/4" NPS (F) 275 Stainless steel L 1/2", 5/8", 3/4" garden hose ID (1-3/16" long) 3/4" garden hose ID (2-7/16" long) 1/2" NPT or BSPT (M) threaded 10 Brass 1/2" NPT or BSPT (M) 10 Brass Lock ring secures trigger of CU150A in fully engaged position /4" garden hose thread (F) 1/2" NPT (M) threaded 10 Brass For use with CU150A spray gun NP 1/4", 3/8" NPT (M) 3/8" NPT or (93) Delrin bearings and Buna-N O-ring /8" NPT (M) 3/8" NPS (F) (93) Nickel-plated brass 8510 Strainer 1/4" NPS (M) 1/4" NPS (F) 275 Stainless steel 9770 Strainer 1/4" NPS (M) 1/4" NPS (F) 275 Stainless steel SS 1/2"-20 J.I.C. (M) 1/2"-20 J.I.C. (F) 138 Stainless steel Ceiling-mount. Boom swivel designed for ceiling mount. Choice of screen mesh sizes. Internal support prevents screen collapse at high pressure. Non-clogging tip protection and effortless handling of spray gun without twisting hose. Branch tee for AA26AUH for liquid recirculation. Spray Guns Ordering Info Spray Gun Connectors l Swivel Type Call for ordering information for other swivels and strainers. H19

20 Spray Gun Swivel Connectors and High Pressure Liquid Strainers Specifications Connection Type Swivel Ordering No. Connection Thread Sizes (NPT/BSPT or NPS) Female x Female Male x Male Male x Female Approx. Overall Length (mm) /4" (F) NPT/BSPT 1/4" (F) NPT/BSPT /4" (F) NPT/BSPT 1/4" (F) NPS /8" (F) NPT/BSPT 3/8" (F) NPT/BSPT /2" (F) NPT/BSPT 1/2" (F) NPT/BSPT /8" (F) NPT/BSPT 1/4" (F) NPS /4" (M) NPT/BSPT 1/4" (M) NPT/BSPT /4" (M) NPT/BSPT 1/4" (M) NPS /8" (M) NPT/BSPT 3/8" (M) NPT/BSPT /2" (M) NPT/BSPT 1/2" (M) NPT/BSPT /4" (M) NPS 1/4" (F) NPS /4" (M) NPT/BSPT 1/4" (F) NPT/BSPT /4" (M) NPT/BSPT 1/4" (F) NPS /8" (M) NPT/BSPT 3/8" (F) NPT/BSPT /2" (M) NPT/BSPT 1/2" (F) NPT/BSPT /8" (M) NPT/BSPT 1/4" (F) NPS 51 Connection Type Female x Hose Shank Male x Hose Shank Swivel Ordering No. Thread Sizes (NPT/BSPT or NPS) Connections Shank Dia. (mm) Approx. Overall Length (mm) For Hose ID (mm) /4" (F) NPS /4" (F) NPS /4" (M) NPT/BSPT /4" (M) NPS /4" (M) NPT/BSPT /4" (M) NPS GunJet spray gun used to remove sand particles from casting molds. H20

Available in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw

Available in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw Type 43L & 43H GunJet Spray Guns AA43 GunJet Designed and built for heavy-duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip-free shutoff and instant