ProMax QuickJet Spray Nozzles. For trouble-free performance and fast maintenance. Experts in Spray Technology. Spray Nozzles.
|
|
|
- Tyrone Pierce
- 6 years ago
- Views:
Transcription
1 Experts in Technology Nozzles Control Analysis Fabrication ProMax QuickJet Nozzles For trouble-free performance and fast maintenance
2 Overview Quick-change spray technology ensures trouble-free performance and fast maintenance s ProMax QuickJet spray nozzle incorporates several design features that help ensure trouble-free performance and fast maintenance. Among the nozzle s features are easy-grip spray tips, a unique locking design that assures correct placement of the spray tip and a standard seal that remains attached to the spray tip to prevent accidental loss or misplacement. ProMax material resists chemical attack The nozzle and tip are constructed of ProMax material, a chemically coupled, glass-reinforced engineering grade of polypropylene that combines strength and durability with chemical resistance. This material allows the nozzle to be used in many applications where other nozzle materials fail. In particular, the nozzle is ideal for many washing, rinsing and cleaning applications where phosphates, acids, solvents and other caustic solutions are used. In addition, since the ProMax QuickJet nozzles resist caking and build-up, nozzle plugging is minimized. No tools are required for tip installation and removal The ProMax QuickJet nozzle has a simple, two-part assembly with a unique patented design that makes tip changing quick and effortless. Because of the easy-grip spray tips, tip installation and removal of the nozzle can be done by hand, in seconds and without tools. Removal of the tip allows inspection of the orifice condition and the tip seal. Replacing the spray tip is even easier due to a detent flexing member that s located on the spray tip. It provides a renewed snap-in feel whenever the tip is replaced. Plus, the spray tip always locks into the correct position due to a built-in internal stop. tips are automatically aligned with a 10º offset to provide proper coverage. A standard TEFLON -coated Viton tip seal provides a positive seal between the body and the tip. And because this seal remains attached to the tip, accidental loss or misplacement is prevented. 2
3 A variety of spray tip choices, inlet connection sizes, and options The ProMax QuickJet nozzle consists of a spray tip and a nozzle body. Quick VeeJet flat spray tips, Quick FullJet full cone spray tips (standard and wide angle) and Quick WhirlJet hollow cone spray tips (standard and wide angle) are offered. Both the Quick VeeJet spray tips and Quick FullJet spray tips are color-coded by capacity. Nozzle bodies for the Quick VeeJet spray tip, Quick FullJet spray tip and Quick WhirlJet spray tip are available with 1/8, 1/4, 3/8 and 1/2 NPT or BSPT (M) inlet connections. An optional external Viton O-ring is available to effectively seal out dirt and other contaminants that might make tip changeout difficult. Type QPPA nozzle body Optional external Viton O-ring (CP1-2/1-VI) Choose from a wide range of capacities and spray angles The standard ProMax Quick VeeJet flat spray tip has fourteen different capacities ranging from.20 to.0 gpm at 40 (. to 2. l/min at 2.8 ). Most capacities are available in seven spray angles ranging from 2 to 110. This gives you a selection of 90 different spray tip configurations. Maximum pressure is 200 (14 ). The ProMax Quick FullJet full cone spray tip is available with standard spray angles of 8 to 8 at 20 (1. ) and ten capacities ranging from.19 to 2.9 gpm at 40 (.2 to 11.0 l/min at 2.8 ). Maximum pressure is 10 (10 ). Plus, the wide angle Quick FullJet full cone spray tip has wide spray angles of 120 at 10 (0. ) and seven capacities ranging from.1 to 2. gpm at 40 (1.9 to 9.8 l/min at 2.8 ). Maximum pressure is 80 ( ). The standard Quick WhirlJet hollow cone spray tip features spray angles of 8 to 2 at 20 (1. ) and eight different spray capacities ranging from.10 to 3.0 gpm at 40 (.38 to 11.4 l/min at 2.8 ). Maximum pressure is 100 ( ). The wide angle Quick WhirlJet hollow cone spray tip also has spray angles of 98 to 112 at 20 (1. ) and four different capacities ranging from 1.0 to 3.0 gpm at 40 (3.8 to 11.4 l/min at 2.8 ). Maximum pressure is 100 ( ). ProMax Quick FullJet spray tip ProMax Quick VeeJet spray tip ProMax Quick WhirlJet spray tip 3
4 Miniature Version Fits Small Spaces Our miniature version is ideal for applications where space is limited The Miniature ProMax Quick VeeJet spray nozzle measures slightly over 1 (2.4 cm) when mounted in a standard header. This makes the nozzle an excellent choice for applications where space is limited. It also features the same two-part assembly as the larger ProMax nozzle, which makes spray tip changing quick and effortless. In addition to the ProMax version of the nozzle, a Kynar (PVDF) version of the Miniature Quick VeeJet nozzle is also offered. Constructed of chemical- and corrosion-resistant Kynar (PVDF) thermoplastic with no colorants or fillings to leach into the spray, this Miniature Quick VeeJet spray nozzle helps keep ultra-pure processing environments intact. The Miniature Quick VeeJet nozzle in Kynar (PVDF) is offered in all the same capacities and spray angles as the Miniature ProMax nozzle series. 1 The nozzle is available in seven spray angles from 2 to 110. An optional body strainer (0 mesh) helps minimize pressure loss and an optional tip strainer (0 mesh) makes removal and cleaning of the spray tip even easier. The optional external Viton O-ring seals the body and spray tip from dirt and other contaminants. Find out how you can reduce your spray nozzle maintenance time with the ProMax QuickJet nozzle Many QuickJet nozzle users have already found that their nozzle maintenance time can be cut in half. Some have experienced even greater reductions. One customer reports that it is possible to replace twelve QuickJet nozzles in the time it previously took to replace one conventional threaded nozzle. To learn more about the ProMax QuickJet spray nozzle, contact your local sales engineer or visit our website at The Miniature Quick VeeJet nozzle is available with 1/8 or 1/4 NPT (M) or inlet connections. The Miniature ProMax Quick VeeJet spray tips are color-coded by capacity and offer eight different capacity sizes ranging from.10 to.8 gpm at 40 (.38 to 3.0 l/min at 2.8 ). The ProMax nozzle operates at a maximum pressure of 1 at 40 F (12 at 4 C) and a maximum temperature of 200 F at 0 (93 C at 3. ), while the Kynar (PVDF) version operates at a maximum pressure of 22 at 40 F (1. at 4 C). 4
5 Common Application Problems and Possible ProMax Nozzle Solutions ProMax Quick VeeJet nozzle ProMax Quick VeeJet nozzles are used for cleaning drum exteriors prior to painting. Miniature ProMax Quick VeeJet nozzle Miniature ProMax Quick VeeJet nozzles are used for pretreating cans on a conveyor line during can manufacturing. ProMax Quick FullJet nozzle ProMax Quick FullJet nozzles are used for degreasing television screen back covers. ProMax Quick WhirlJet nozzle ProMax Quick WhirlJet nozzles are used in the mining industry for washing rotary drum vacuum filter cake to leach out gold contents.
6 ProMax Quick VeeJet Nozzles Standard Angle Flat Specifications QPTA gpm (.9 l/min) QPTA gpm (1.2 l/min) QPTA gpm (1. l/min) QPTA 0.0 gpm (2.0 l/min) QPTA 0.0 gpm (2.4 l/min) Type QPPA nozzle bodies available in 1/8, 1/4 and 3/8 sizes with NPT or BSPT threads QPTA gpm (3.2 l/min) QPTA gpm (3.9 l/min) QPTA 1 1. gpm (.9 l/min) QPTA gpm (.9 l/min) QPTA gpm (11.8 l/min) Optional external Viton O-ring (CP1-2/1-VI) QPTA gpm (1.8 l/min) QPTA 0.0 gpm (19. l/min) Capacities at 40 (3 ). QPTA 0.0 gpm (24 l/min) QPTA 0.0 gpm (28 l/min) ProMax Quick VeeJet spray tips with TEFLON -coated Viton tip seal Optional internal strainer available for capacity sizes up to -08. Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 1/8 body can be used up to -40 capacity size at Size Color (gallons per minute) 02 Gray Black Orange Green Yellow Blue White Gray Black Orange Green Yellow Blue Red
7 Specifications Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 1/8 body can be used up to -40 capacity size at Size Color (liters per minute) 02 Gray Black Orange Green Yellow Blue White Gray Black Orange Green Yellow Blue Red Dimensions & Weights Nozzle Type Nozzle Inlet Conn. NPT or A B Hex. C Net Weight oz. (kg) QPPA + QPTA 1/8, 1/4, 3/8, 1/2 1-3/4 (44.) /8 (22.2) 1-1/4 (32).3 (.01) ProMax QuickJet Complete Nozzle Without External O-Ring 1/4 QPPA + QPTA 2 04 Inlet Body Tip Conn. Type Type Angle Size ProMax QuickJet Complete Nozzle With External O-Ring 3/8 QPPA + QPTA 10A Inlet Body Tip Conn. Type Type Angle Size Maximum pressures at various temperatures PRESSURE OPERATING REGION ( F) ( C) LIQUID TEMPERATURE BSPT connections require the addition of a B prior to the inlet connection.
8 Miniature ProMax Quick VeeJet Flat Nozzles Specifications QMVV gpm (.39 l/min) QMVV gpm (.9 l/min) QMVV gpm (.9 l/min) Optional Kynar body strainer * (CP KY [1/8 ] or CP KY [1/4 ]) Type QPPM nozzle bodies available in 1/8 and 1/4 sizes with NPT or BSPT threads QMVV gpm (1.2 l/min) QMVV gpm (1. l/min) QMVV- 0.0 gpm (2.0 l/min) Optional Kynar tip strainer * (CP409-KY) QMVV- 0.0 gpm (2.4 l/min) QMVV gpm (3.2 l/min) Optional external Viton O-ring (CP1-2/13-VI) Capacities at 40 (3 ). ProMax Miniature Quick VeeJet spray tips with TEFLON -coated Viton tip seal *0 mesh use of both tip and body strainers is not recommended. Nozzle Inlet Conn. NPT or 1/8, 1/4 at Size Tip Color (gallons per minute) 01 White Red Gray Black Orange Green Yellow Blue
9 Specifications Nozzle Inlet Conn. NPT or 1/8, 1/4 at Size Color (liters per minute) 01 White Red Gray Black Orange Green Yellow Blue Dimensions & Weights Nozzle Type Length Hex. Net Weight oz. (kg) QPPM + QMVV 1-3/1 (30) /8 (1.9).13 (.003) ProMax QuickJet Complete Nozzle Without External O-Ring 1/4 QPPM + QMVV 0 02 Inlet Body Tip Conn. Type Type Angle Size ProMax QuickJet Complete Nozzle With External O-Ring 1/8 QPPM + QMVV 2 02A Inlet Body Tip Conn. Type Type Angle Size Maximum pressures at various temperatures PRESSURE OPERATING REGION ( F) ( C) LIQUID TEMPERATURE BSPT connections require the addition of a B prior to the inlet connection. 9
10 ProMax Quick FullJet Nozzles Standard Angle Full Cone Specifications QPHA-1.19 gpm (.4 l/min) QPHA gpm (1.1 l/min) QPHA-2.38 gpm (1. l/min) QPHA-3. gpm (2.2 l/min) QPHA-3.. gpm (2. l/min) Type QPPA nozzle bodies available in 1/4 and 3/8 sizes with NPT or BSPT threads Optional external Viton O-ring (CP1-2/1-VI) QPHA-.9 gpm (3. l/min) QPHA gpm (4.8 l/min) Capacities at 40 (3 ). QPHA-8 1. gpm (.8 l/min) QPHA gpm (.4 l/min) QPHA gpm (11.2 l/min) ProMax Quick FullJet spray tips with TEFLON -coated Viton tip seal Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 Number Tip Color Orifice Dia. Nom. (in.) Max. Free Passage Dia. * (in.) 10 (gallons per minute) QPHA-1 Brown QPHA-1. White QPHA-2 Gray QPHA-3 Black QPHA-3. Orange QPHA- Green QPHA-. Yellow QPHA-8 Beige QPHA-10 Blue QPHA-1 Red *Foreign matter with maximum diameter as listed can pass through nozzle without clogging
11 Specifications Nozzle Inlet Conn. NPT or Number Tip Color Orifice Dia. Nom. (mm) Max. Free Passage Dia. * (mm) (liters per minute) QPHA-1 Brown QPHA-1. White QPHA-2 Gray QPHA-3 Black /8, 1/4, QPHA-3. Orange /8, 1/2 QPHA- Green QPHA-. Yellow QPHA-8 Beige QPHA-10 Blue QPHA-1 Red *Foreign matter with maximum diameter as listed can pass through nozzle without clogging. 0. Dimensions & Weights Nozzle Type Nozzle Inlet Conn. NPT or A B Hex. C Net Weight oz. (kg) QPPA + QPHA 1/8, 1/4, 3/8, 1/2 1-3/4 (44.) /8 (22.2) 1-1/4 (32).4 (.01) ProMax QuickJet Complete Nozzle Without External O-Ring 1/4 QPPA + QPHA 3 Inlet Body Tip Conn. Type Type Size ProMax QuickJet Complete Nozzle With External O-Ring 3/8 QPPA + QPHA 10A Inlet Body Tip Conn. Type Type Size Maximum pressures at various temperatures PRESSURE OPERATING REGION ( F) ( C) LIQUID TEMPERATURE BSPT connections require the addition of a B prior to the inlet connection. 11
12 ProMax Quick FullJet Nozzles Wide Angle Full Cone Specifications QPHA-2.8W.1 gpm (2.0 l/min) QPHA-4.3W.9 gpm (3.1 l/min) QPHA-.W 1.0 gpm (4.0 l/min) QPHA-8W 1. gpm (.8 l/min) Type QPPA nozzle bodies available in 1/4 and 3/8 sizes with NPT or BSPT threads Optional external Viton O-ring (CP1-2/1-VI) QPHA-10W 1.8 gpm (.2 l/min) QPHA-12W 2.2 gpm (8. l/min) QPHA-14W 2. gpm (10.1 l/min) Capacities at 40 (3 ). ProMax Quick FullJet spray tips with TEFLON -coated Viton tip seal Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 Number Color Orifice Dia. Nom. (in.) Max. Free Passage Dia. * (in.) 10 (gallons per minute) QPHA-2.8W White QPHA-4.3W Black QPHA-.W Orange QPHA-8W Green QPHA-10W Yellow QPHA-12W Blue QPHA-14W Red *Foreign matter with maximum diameter as listed can pass through nozzle without clogging
13 Specifications Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 Number Color Orifice Dia. Nom. (mm) Max. Free Passage Dia. * (mm) 0.3 *Foreign matter with maximum diameter as listed can pass through nozzle without clogging (liters per minute) QPHA-2.8W White QPHA-4.3W Black QPHA-.W Orange QPHA-8W Green QPHA-10W Yellow QPHA-12W Blue QPHA-14W Red Dimensions & Weights Nozzle Type Nozzle Inlet Conn. NPT or A B Hex. C Net Weight oz. (kg) QPPA + QPHA- W 1/8, 1/4, 3/8, 1/2 1-3/4 (44.) /8 (22.2) 1-1/4 (32).4 (.01) ProMax QuickJet Complete Nozzle Without External O-Ring 1/4 QPPA + QPHA 2.8W Inlet Body Tip Conn. Type Type Size ProMax QuickJet Complete Nozzle With External O-Ring 3/8 QPPA + QPHA 14WA Inlet Body Tip Conn. Type Type Size BSPT connections require the addition of a B prior to the inlet connection. 13
14 ProMax Quick WhirlJet Nozzles Standard Angle Hollow Cone Specifications QPAA- Type QPPA nozzle bodies available in 1/4 and 3/8 sizes with NPT or BSPT threads Optional external Viton O-ring (CP1-2/1-VI) ProMax Quick WhirlJet spray tips with TEFLON - coated Viton tip seal Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 Number Inlet Dia. Nom. (in.) Orifice Dia. Nom. (in.) 3 (gallons per minute) QPAA QPAA QPAA QPAA QPAA QPAA QPAA QPAA Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 Number Inlet Dia. Nom. (mm) Orifice Dia. Nom. (mm) (liters per minute) QPAA QPAA QPAA QPAA QPAA QPAA QPAA QPAA
15 Specifications Dimensions & Weights Nozzle Type Length Hex. Net Weight oz. (kg) QPPA + QPAA 2-9/32 (8) /8 (22.2).4 (.01) ProMax QuickJet Complete Nozzle Without External O-Ring 1/4 QPPA + QPAA 3 Inlet Body Tip Conn. Type Type Size ProMax QuickJet Complete Nozzle With External O-Ring 1/4 QPPA + QPAA 3A Inlet Body Tip Conn. Type Type Size BSPT connections require the addition of a B prior to the inlet connection. ProMax Quick WhirlJet nozzles are used to cool and humidify germination beds in a malting plant. 1
16 ProMax Quick WhirlJet Nozzles Wide Angle Hollow Cone Specifications QPAA- W Type QPPA nozzle bodies available in 1/4 and 3/8 sizes with NPT or BSPT threads Optional external Viton O-ring (CP1-2/1-VI) ProMax Quick WhirlJet spray tips with TEFLON - coated Viton tip seal Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 Number Inlet Dia. Nom. (in.) Orifice Dia. Nom. (in.) 3 (gallons per minute) QPAA-W QPAA-8W QPAA-10W QPAA-1W Nozzle Inlet Conn. NPT or 1/8, 1/4, 3/8, 1/2 Number Inlet Dia. Nom. (mm) Orifice Dia. Nom. (mm) (liters per minute) QPAA-W QPAA-8W QPAA-10W QPAA-1W
17 Specifications Dimensions & Weights Nozzle Type Length Hex. Net Weight oz. (kg) QPPA + QPAA- W 2-9/32 (8) /8 (22.2).4 (.01) ProMax QuickJet Complete Nozzle Without External O-Ring 1/4 QPPA + QPAA W Inlet Body Tip Conn. Type Type Size ProMax QuickJet Complete Nozzle With External O-Ring 1/4 QPPA + QPAA WA Inlet Body Tip Conn. Type Type Size BSPT connections require the addition of a B prior to the inlet connection. ProMax Quick WhirlJet nozzles are used to heat and cool jelly jars during the pasteurization process. 1
18 Other products offered in ProMax material ProMax Adjustable Ball-Type Nozzle ensures accurate alignment without overspray The No. 323 ProMax Adjustable Ball-Type nozzle combines a threaded pipe connection with an adjustable swivel-type ball for added versatility. You can adjust the spray direction quickly and easily, without disturbing the pipe connection. alignment can be finely tuned to minimize overspray or to direct sprays to targeted areas. The nozzle is constructed of a glass-filled polypropylene body and polyphthalamide cap with an EPDM O-ring (Viton optional). Maximum operating pressure is 12 (8. ). Inlet connections 1/4, 3/8 and 1/2 NPT or are offered. The ProMax Adjustable Ball-Type nozzle accepts the ProMax ball for use with ProMax FullJet, VeeJet and WhirlJet tips, a threaded ball for spray nozzles with 1/4 and 3/8 NPT or inlet connections, or a blank tip. It offers adjustability up to º. ProMax Clip-Eyelet Nozzle The No. 400A ProMax Clip-Eyelet nozzle combines a snapon pipe connection with easy-to-install and replace spray tips for added versatility. An adjustable, swivel-type ball makes fast work of changing the direction of the spray without disturbing the pipe connection. alignment can be finely tuned to minimize overspray. The ProMax Clip-Eyelet nozzle accepts the ProMax ball for use with ProMax FullJet and VeeJet tips. The flat spray VeeJet tips are automatically locked into alignment each and every time. The nozzle is constructed of ProMax material which makes it well suited for spraying phosphates, acids, solvents and other caustics. It is ideal for cleaning, rinsing, coating, and wetting applications. It operates at a maximum pressure of 0 (4 ) and at a maximum temperature of 180 F (82 C). Body sizes are available to clamp on 1, 1-1/4, 1-1/2 and 2 pipes. ASSEMBLY NO. PROMAX BALL 323-3/8-PP + CP49-PP + QPTA 2 02 Assembly Ball Tip No. No. Type Angle Size ASSEMBLY NO. 400A-1-1/4-PP + QPTA 2 02 Assembly Tip No. Type Angle Size 18
19 ProMax HP Eyelet s unique design speeds changeout The No. 382 ProMax HP Eyelet is the first pipe-mounted assembly of its kind that can be easily installed and removed by hand. The assembly s hinged body only requires one screw for hand tightening to the spray header. The screw may be installed from either side of the assembly for easy access. It also remains attached to the assembly when loosened to eliminate the chance of misplacing the screw. The nozzle is constructed of glass-filled polypropylene body and polyphthalamide cap with EPDM O-ring (Viton optional). This design also prevents rotation when the retaining cap is removed or tightened. It operates at a maximum pressure of 12 (8. ) and a maximum temperature of 180 F (82 C). It accepts the ProMax ball for use with ProMax FullJet, VeeJet and WhirlJet tips, a threaded ball for spray nozzles with 1/4 and 3/8 NPT or inlet connections or a blank tip. It also offers adjustability up to. Body sizes are available to clamp on 1-1/4 and 1-1/2 pipes. Reduce maintenance time with ProMax QuickJet nozzle adapters The ProMax QuickJet adapters can convert any nozzle with a standard male connection or UniJet style tip into a ProMax QuickJet style unit. Constructed of ProMax material, the QPA adapter fits standard nozzles with 1/8, 1/4 or 3/8 NPT or inlet connections. The QPAxT adapter accepts all UniJet spray tips, strainers and tip retainers. Used with the ProMax QuickJet body, the adapter provides all the benefits of quick-change technology. Maintenance downtime is reduced since no tools are required for installation and removal. Plus, the nozzles or spray tips are automatically locked into alignment. As a result, quality control problems due to misaligned nozzles or tips are a thing of the past. ADAPTER NO. QPA x 1/8 Adapter No. Inlet Conn. Optional accessories are also offered for the ProMax nozzle Additional accessories are also available from for the ProMax nozzle. The QPA plug can be used to conveniently shut off individual nozzles. And a threaded ball (CP2082-1/4-PPB and CP2082-3/8-PPB) accepts a variety of conventional spray nozzles. For more information on these products, request a copy of Industrial Products Catalog 0. ASSEMBLY NO. PROMAX BALL /4-PP + CP49-PP + QPTA 2 02 Assembly Ball Tip No. No. Type Angle Size 19
20 Other helpful resources and product information for specifying spray nozzles Industrial Products Catalog page, full-line catalog including spray nozzles and accessories, technical data and problem solving ideas. Optimizing Nozzle Performance in Metal Pretreatment Applications Bulletin No. 34E This 12-page bulletin includes information on spray nozzles for improving finished product quality in the surface treatment process. Included are applications and specifications on many spray nozzles and accessories designed for surface treatment. A Guide to Improving the Performance of Your Air Control Applications Catalog 20B 28-page catalog includes information on our full line of air control nozzles. Also included is an application/selection guide as well as noise reduction and cost savings information. Quick-Connect Nozzle Systems Bulletin No. 13B 1-page bulletin highlights s expanded line of quickconnect nozzles. The timesaving installation and maintenance features of this nozzle including a snap-on pipe connection and easy to install and replace spray tips, are described in detail. Optimizing Your System: Nozzle Maintenance and Control for Improved Production Efficiency Technical Manual 410 Explains how to maximize performance and quality in your spray application. Catalog 0 Bulletin No. 34E Catalog 20B Bulletin No. 13B Technical Manual 410 Kynar is a registered trademark of Arkema, Inc. TEFLON is registered trademark of DuPont Company. Viton is a registered trademark of DuPont Performance Elastomers. Experts in Technology P.O. Box 900, Wheaton, IL USA Nozzles Control Analysis Fabrication Tel: SPRAY Intl. Tel: Fax: SPRAY Intl. Fax: Bulletin No. 14B Printed in the U.S.A. 200
Spray Nozzle. QuickJet and Systems/Components. Features and Benefits. Accessories
Efficient QuickJet and Systems are designed to save time in the cleaning and replacement of plugged or worn spray tips. Key feature overview for QuickJet Systems: Reduce maintenance downtime and costs
F o a m C o n t r o l C l e a n i n g
Full Cone s Absorption Fire Protection Chemical Injection Rinsing F o a m C o n t r o l C l e a n i n g Gas Treatment esuperheating Mist Elimination Cooling ust Control B Full Cone s Introduction CHOOE
PulsaJet Automatic Spray Nozzles. Unmatched Precision for the Most Demanding Coating, Sealing and Marking Operations. Experts in Spray Technology
Experts in Technology Nozzles Control Analysis Fabrication PulsaJet Automatic Nozzles Unmatched Precision for the Most Demanding Coating, Sealing and Marking Operations Advanced Technology Delivers Superior
1/8" to 1/4" female conn. Flow rates of 1 gpm and greater at 40 psi (3.8 lpm and greater at 2.8 bar)
VEEJET NOZZES FAT SPRAY OVERVIEW: VEEJET SPRAY NOZZES Flat spray pattern distributes the liquid as a flat- or sheet-type spray Uniform distribution over a wide range of flow rates and pressures Spray angles
Spray Nozzles. Spray Control. Spray Fabrication. Spray Analysis. Pulp and Paper Industry Catalog
Nozzles Control Analysis Fabrication Pulp and Paper Industry Catalog Capabilities Overview Comprehensive Technology Solutions from a Single Source Ensures spray system optimization At the heart of all
Section H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.
MAXIMUM FREE PASSAGE FULLJET SPRAY NOZZLES UNIQUE DESIGN MINIMIZES CLOGGING, PROVIDES SUPERIOR PERFORMANCE
MAXIMUM FREE PASSAGE FUJET SPRAY NOZZES UNIQUE DESIGN MINIMIZES COGGING, PROVIDES SUPERIOR PERFORMANCE The liquid comes in contact with the vane as it enters the nozzle. The unique vane design stabilizes
Section E Fine Spray Nozzles
Section E Fine Spray s Overview Our fine spray hydraulic atomizing nozzles are available in two styles. Standard s: Traditional threaded nozzles made of metal. Quick-Connect s: Consisting of a nozzle body
NEW AUTOJET PRECISION SPRAY CONTROL SYSTEM WITH ZONING
NEW AUTOJET 2008+ PRECISION SPRAY CONTROL SYSTEM WITH ZONING INCREASING THROUGHPUT AND DECREASING WASTE IN COATING, LUBRICATING AND DISPENSING OPERATIONS JUST GOT EASIER THAN EVER 98250 Modular Spray Manifold
Liquid Strainers. Protect nozzles, valves and pumps from damaging debris. Experts in Spray Technology Spray Nozzles. Spray Fabrication.
Experts in Technology Nozzles Control Analysis Fabrication Liquid Strainers Protect nozzles, valves and pumps from damaging debris. Table of Contents T Strainers Low to Medium Pressure TW...3 TWC...3 TWF...4
K-BALL SERIES SPRAY NOZZLES
K-BALL SERIES NOZZLES K-Ball Clip-on spray nozzles CHARACTERISTICS: These nozzles simply clip over a pre-drilled pipe (9/16 dia. hole) and are available with a variety of spray balls, in various spray
GUNJET NUMBER AA143-AL-*-10 A C A C
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 2 to 55 bar. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
Multiple Nozzle Body Assemblies for Dry Booms
Multiple Nozzle Body Assemblies for Dry Booms QJ350 Compact Nozzle Body for Dry Booms n Compact design means easier mounting and less interference with boom structure. n Available with 3 or 5 spray positions
Available in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw
Type 43L & 43H GunJet Spray Guns AA43 GunJet Designed and built for heavy-duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip-free shutoff and instant
Spray Guns. Choice of Materials and Capacities
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 30 to 800 PSI. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
AUTOJET MODEL MODULAR SPRAY SYSTEM AUTOMATIC SPRAY CONTROL MADE SIMPLE
AUTOJET MODEL 1550+ MODULAR SPRAY SYSTEM AUTOMATIC SPRAY CONTROL MADE SIMPLE AUTOJET MODEL 1550+ MODULAR SPRAY SYSTEM OPTIMIZES THE PERFORMANCE OF YOUR AUTOMATIC SPRAY NOZZLES BENEFITS Automatic on/off
General Engineering Spray Nozzles & Accessories
General Engineering Spray Nozzles & Accessories 3 GENERAL SPRAY NOZZLES & ACCESSORIES Clip On Spray Nozzles SWIVELING ANGLE ADJUSTMENT SPRAY CHARACTERISTICS : These nozzles simply clip over a pre-drilled
Hollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g
Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO ON NOZZ INTRODUTION
A Guide to Improving the Performance of Your Drying and Blow-off Applications with WindJet Air Products. Experts in Spray Technology Spray Nozzles
Experts in Spray Technology Spray Nozzles Spray Control Spray Analysis Spray Fabrication A Guide to Improving the Performance of Your Drying and Blow-off Applications with WindJet Air Products Usage Tips
Hollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g
Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO NOZZ INTRODUTION
CJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ
Multiple Nozzle Body Assemblies for Dry Booms
Multiple Nozzle Body Assemblies for Dry Booms QJ350 Compact Nozzle Body for Dry Booms n Compact design means easier mounting and less interference with boom structure. n Available with 3 or 5 spray positions
Owner's Manual. Model: SK-61-4R ( ) (60 Gallon Skid Sprayer w/2.5 H.P. Engine, 4-Roller Pump, Deluxe Handgun) Technical Specifications
Owner's Manual Model: SK--R (0) (0 Gallon Skid Sprayer w/. H.P. Engine, -Roller Pump, Deluxe Handgun) Technical Specifications. H.P. Recoil Start Engine Roller Pump - G.P.M. Pressure Relief Valve Pressure
AUTOMATIC SPRAY NOZZLES COATING DISPENSING GLAZING LAMINATING ROBOTIC APPLICATIONS MARKING FLAVORING HUMIDIFYING LUBRICATING MOISTURIZING
AUTOMATIC SPRAY NOZZLES COATING DISPENSING GLAZING LAMINATING ROBOTIC APPLICATIONS MARKING FLAVORING HUMIDIFYING LUBRICATING MOISTURIZING B1 AUTOMATIC NOZZLES INTRODUCTION INTRODUCTION If your application
Spray Products for the Car Wash Industry Reduce operating costs and improve customer satisfaction by maximizing spray performance
s Control Analysis Fabrication Products for the Car Wash Industry Reduce operating costs and improve customer satisfaction by maximizing spray performance ing Systems Co. high-performance spray products
TEEJET SWIVELS & 45 NOZZLES BODIES
TEEJET SWIVELS & 45 NOZZLES BODIES 45 QUICKJET Poly construction Self aligning tip cap Accepts standard twist lock cap, tip & screen Max 125 PSI In MPT Out 5699 1/4" Twist Lock 45 Poly construction nozzle
Multiple Nozzle Body Assemblies for Dry Booms
Multiple Nozzle Body Assemblies for Dry Booms QJ360C Nozzle Body Series for Dry Booms Available with either 3, 4 or 5 spray positions for easy change of spray tips or quick boom flushing. Positive shutoff
ACCUCOAT SPRAY SYSTEMS FOR PRECISE, UNIFORM APPLICATION OF OIL, BUTTER, SYRUP AND OTHER VISCOUS COATINGS
ACCUCOAT SPRAY SYSTEMS FOR PRECISE, UNIFORM APPLICATION OF OIL, BUTTER, SYRUP AND OTHER VISCOUS COATINGS TABLE OF CONTENTS page ACCUCOAT SPRAY SYSTEMS: Benchtop Systems For R&D 4 In-line Systems For Light
Experts in Spray Technology WINDJET AIR PRODUCTS CATALOG 20D
Experts in Spray Technology WINDJET AIR PRODUCTS CATALOG 20D Table of contents Blower Products page Detailed Table of Contents 3 Compressed Products Detailed Table of Contents 13 How to Optimize Drying
TUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING
TUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING TUNGSTEN CARBIDE TIPS SAVE ADHESIVES, COATINGS, PAINT, CHEMICALS & ELECTRICITY In high-pressure spraying applications, the high velocity of the liquid through
BEX SPRAY NOZZLES CATALOG NO. 60
BEX SPRAY NOZZLES CATALOG NO. 60 WELCOME TO BEX SPRAY NOZZLES With over 50 years of design and manufacturing experience, BEX is a leader in spray nozzle and tank mixing eductor technology. Our sales specialists,
CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING
AIR SPRAY NOZZLES CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING C1 AIR NOZZLES INTRODUCTION LARGEST SELECTION OF NOZZLES IN
VESSEL CLEANING. 54 spray.com SPRAY Intl Application Overview 55. Selection and Optimization Tips 56. CIP / WIP Solutions 58
VESSEL CLEANING page Application Overview 55 Selection and Optimization Tips 56 CIP / WIP Solutions 58 Fixed Spray Balls 60 Fluid-Driven Rotary Nozzles 62 Regulated Fluid-Driven Rotary Nozzles 70 54 spray.com
Pounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
For Applications Demanding Precision and Efficiency, FloMax Nozzles Outperform All Others
Nozzles Control Analysis Fabrication FloMax Air Atomizing Nozzles Unique Atomization Process Provides Unmatched Efficiency in Gas Conditioning Operations For Applications Demanding Precision and Efficiency,
H-U 1/8" to 3/4" male conn. (3.8 lpm and greater at 2.8 bar) U 1/8" to 1/4" female conn.
fat VeeJet s TANAR ANG E PRAY Overview: VeeJet H and U Fl spray nozzles are ideal for use in spray headers or manifolds. They produce a fan-type, tapered-edge spray ptern to ensure even coverage when multiple
A GUIDE TO SPRAY TECHNOLOGY FOR THE PULP & PAPER INDUSTRY
A GUIDE TO SPRAY TECHNOLOGY FOR THE PULP & PAPER INDUSTRY COMPREHENSIVE SPRAY TECHNOLOGY SOLUTIONS FROM A SINGLE SOURCE WE LOOK FORWARD TO HELPING YOU OPTIMIZE YOUR OPERATIONS INVOLVING SPRAY TECHNOLOGY.
TEEJET VARI-SPACING NOZZLES
PRO SERIES TEEJET VARI-SPACING NOZZLES For use with all interchangeable Spray Tips For operating pressures up to 125 p.s.i. TeeJet Vari-Spacing Nozzles permit the construction of spray booms with adjustable
Section J Air Control Nozzles
Section J Overview Our extensive line of air control nozzles, used in drying and blowing applications, includes products that use regenerative blowers and products that require compressed air. WindJet
LG-60-3PT-WP-309-BL-TSC
55 Model No: LG-0-PT-WP-0-BL-TSC 0 Gallon Point Lawn & Garden Sprayer W/Pump & Coupler & Boomless Boom Assembly / Operation Instructions / Parts ASSEMBLY Most of the sprayer has been assembled at the factory..
Hollow cone nozzles.
Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air, goods, or textiles Oil spraying Protection of
Owner's Manual. (60 Gallon 3 Point Sprayer w/pump, Coupler, & 7-Nozzle Boom Assembly) Assembly. Information About The Sprayer
Owner's Manual (0 Gallon Point Sprayer w/pump, Coupler, & -Nozzle Boom Assembly) Assembly Most of the sprayer has been assembled at the factory. Join the center boom member to the carrier frame with the
Parts and Accessories
Parts and Accessories For a full list of available pressure washer parts and accessories, visit www.landa.com. 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Hypro
AY-SS Trigger Adapter AA46
98 98 Choice of Materials Spray and Capacities Guns For spot spraying, tree spraying, livestock spraying and power washing at GunJet pressures Number from AA2Spray 30 to 800 Guns PSI. To Length operate
Leaders in precision application components, control system technology, and application data management.
Catalog 51-M Leaders in precision application components, control system technology, and application data management. www.teejet.com Table of Contents Selection Guide TeeJet Broadcast Nozzle Selection
Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last
Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run
Owner's Manual. Model: ( ) (150 Gallon, 5.5 HP Skid Sprayer) Technical Specifications. General Information. Warranty/Parts/Service
Owner's Manual Model: -0 (00) (0 Gallon,. HP Skid Sprayer) Technical Specifications General Information Thank you for purchasing this product. The purpose of this manual is to assist you in operating and
NDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
TEEJET VARI-SPACING NOZZLES
4 TEEJET VARI-SPACING NOZZLES For use with all interchangeable Spray Tips For operating pressures up to 125 p.s.i. TeeJet Vari-Spacing Nozzles permit the construction of spray booms with adjustable nozzle
Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560
Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;
UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE -
UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE - Uni-Spray Nozzles... are injection molded from custom blended polypropylene, a cost effective material that is corrosion and heat resistant and is impervious
3" Elima-Matic Pumps. Air-Operated Double Diaphragm Pumps
3" Elima-Matic Pumps Air-Operated Double Diaphragm Pumps Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading 3" Elima-Matic Pumps
MicroCoat. System Operating Manual MC2000 Series. MC785, MC785-WF Spray Valves. US: UK: Mexico:
MicroCoat System Operating Manual MC2 Series MC785, MC785-WF Spray Valves A NORDSON COMPANY US: 8-498-8865 UK: 8 585733 Mexico: 1-8-556-3484 Introduction The MicroCoat System provides precise lubrication
NDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
DEMA RAPID FIRE MODELS 6300, , , , 6310, 6300H 6300E, 6300EH, &6310E INSTRUCTION SHEET
I-1002 Pg. 1 of 12 PURPOSE: The RAPID FIRE is a spray system designed with a single knob to control OFF, RINSE and up to two chemicals using a single chemically resistant plastic injector. There is full
Rocket High Performance Injector. Single Barb. Dual Barb. B Series Injectors. C Series Injectors. Adjustable Water Flow
Rocket High Performance Injector The Rocket injector was designed to be the most versatile venture injector in the marketplace. A superior design that can handle any task you throw at it. Designed to be
Pounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
HYPRO. ProFlo. Nozzle Bodies with Superior Durability and High Flow Rates
HYPRO ProFlo Nozzle Bodies with Superior Durability and High Flow Rates WWW.HYPROSPRAYTIPS.COM HYPRO ProFlo Wet boom clamp sizes: 1 2, 3 4, 1, 20mm, 22mm, 25mm Turret-indexing design for improved consistency
VALVES std $ fp $ fp $
std = standard port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS fp = full port Code No. Part No. Size Price 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364
200 & 300 Gallon 3 Point w/5880 Nozzle ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
5300826 Model: 200-3PT-5880 5300827 Model: 300-3PT-5880 200 & 300 Gallon 3 Point w/5880 Nozzle ASSEMBLY / OPERATION INSTRUCTIONS / PARTS PUMP SYSTEM ASSEMBLY INSTRUCTIONS 1. Use a good grade of thread
Your One Stop Shop for Parts GUNS & LANCES
Your One Stop Shop for Parts 7 Legacy AP1000 Trigger Guns The World s most popular and easiest to repair trigger gun!!! PSI: 4500 Weight: 19 oz 9.802-229.0 353010 AP1000 8.710-414.0 353010W AP1000 Weep
Hollow Cone Spray Nozzles Series
Hollow Cone Spray Nozzles Series TANK WASHING HOLLOW CONE APPLICATION Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment
GUNS & LANCES. Legacy AP1000 Trigger Guns. MV 920 Gun. Linear Trigger Guns. M407 Trigger Gun. Giant Trigger Guns. Your One Stop Shop for Parts
Legacy AP1000 Trigger Guns The World s most popular and easiest to repair trigger gun!!! PSI: 4500 Weight: 19 oz 9.802-229.0 353010 AP1000 8.710-414.0 353010W AP1000 Weep 8.704-157.0 109856 Unitized Valve
HANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL
PRO SERIES SPRAYING SYSTEMS NO. AA18-AL HANDGUNS 3PT SKID HEAVY DUTY TYPE ROTATING HANDLE CONTROL Handle rotates 360 to operate spray gun valve from shutoff to maximum flow position. As handle is turned,
Aluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel
DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15
Optimize Performance and Simplify Installation
ccessories F1 c c e s s o r i e s Introduction Optimize Performance and Simplify Installation Simplify Nozzle Mounting and Positioning Split-eyelet connectors djustable ball fittings djustable hoses and
DEMA Model 294D Spray Foam INSTALLATION INSTRUCTIONS
1. PARTS A. Foamer Assembly B. Plastic chemical supply tubing w/ foot valve and ceramic weight C. Metering tip kit D. Outlet hose 25 long (optional accessory) E. Shut-off valve (optional accessory) 2.
450FB and 460FB Flow Back Manifolds
450FB and 460FB Flow Back Manifolds The 450FB and 460FB flow back valves allow pressure from the boom lines to be relieved back to the tank when the valve is switched to the off position. Available with
Valves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
FUNNELS & FLUID CONTROL PRODUCTS
RED POLYETHYLENE FUNNELS Model #32090 #32091 #32095 #32096 #32001 #32002 #32005 #32006 1-pint 1-pint 2-quart 6-quart Color Red Red Red Red Top ID 4 1 / 2" 4 1 / 2" 6 1 / 2" 8 1 / 4" Spout OD 1 / 2" 1 /
OWNER S MANUAL. Model: TR-40-GAS ( ) (40 Gallon Lawn & Garden Trailer Sprayer w/5-nozzle Boom Assembly) Technical Specifications
OWNER S MANUAL Model: TR-40-GAS (5301339) (40 Gallon Lawn & Garden Trailer Sprayer w/5-nozzle Boom Assembly) Technical Specifications 40 Gal. Corrosion-Resistant Polyethylene Tank 5.5 HP Briggs & Stratton
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
RINSEGARD HP AND HPX. Simultaneously removes trace levels of positively charged ions and fine particles in ultrapure DI water
CONTAMINATION CONTROL SOLUTIONS RINSEGARD HP AND HPX CARTRIDGE and disposable FILTERS Simultaneously removes trace levels of positively charged ions and fine particles in ultrapure DI water hydrophilic
PRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)
GUNS & LANCES. Linear Trigger Guns. Legacy Best Trigger Guns. Legacy Industrial Trigger Guns. Giant Trigger Guns. PA Trigger Guns.
Legacy Best Trigger Guns The most comfortable and longest lasting gun on the market!!! Weight: 21 oz Ideal for commercial cleaning & long work time applications. Quantity price breaks at 10 and 25 guns
Ultra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
TEEJET VARI-SPACING NOZZLES
TEEJET VARI-SPACING NOZZLES For use with all interchangeable Spray Tips For operating pressures up to 125 p.s.i. TeeJet Vari-Spacing Nozzles permit the construction of spray booms with adjustable nozzle
Spray Clean 606T-2 Installation Instruction
Spray Clean 606T-2 Installation Instruction Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
PROMAX INSTRUCTION MANUAL
PROMAX INSTRUCTION MANUAL One Hand Activation Single Product [1 gpm (4l/m) models only] One Hand Activation 4 Product [1 gpm (4l/m) models only] Button Activation Single Product [1, 4, 8 gpm (4, 16, 30
Quick-disconnect spray nozzles
ZIP-TIP Quick-disconnect spray nozzles + = ZIP-TIP BODY STNDRD O-RINGS ZIP-TIP TIP COMPETE UNIT BEX ZIP-TIP quick-disconnect spray nozzles are designed to allow fast and easy installation and removal of
Husky 515 / 716 Air-Operated Diaphragm Pumps
First choice when quality counts. Husky 515 / 716 Air-Operated Diaphragm Pumps 515 1/2 in. non-metallic pumps in acetal, polypropylene, and kynar 716 3/4 in. metal pumps in SST, aluminum No seals to leak
Owner's Manual. Model: UTL-60-12V ( ) (60 Gallon Utility Sprayer w/ 5-Nozzle Boom Assembly) Technical Specifications.
Owner's Manual Model: UTL-0-V (0) (0 Gallon Utility Sprayer w/ -zzle Boom Assembly) Technical Specifications 0 Gallon Corrosion-Resistant Polyethylene Tank Deluxe Pistol-Grip Handgun w/ Ft. Hand Gun Hose
Car Wash / Pressure Washer
Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
LD Series Electronic Meters
LD Series Electronic Meters Manual and Preset Dispense Dispenses in gallons, quarts, pints and liters Easy to read LCD display with durable switches for long life Rugged engineered material for superior
DEMA MODEL 692T FOAM STATION I INSTALLATION INSTRUCTION
1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. #10 Screw & Anchor Kit Set (Total: 4 Screws & 4 Anchors) 1 C. Ceramic Weight 1 D. ¼ ID Tubing & Foot Valve Assembly 1 E. Metering
DP Series Specifications
DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15
OWNER S MANUAL. Model: SK-61-4R ( ) (60 Gallon Skid Sprayer w/5.5 HP Engine, 4-Roller Pump & Deluxe Handgun) Assembly Instructions
OWNER S MANUAL Model: SK-61-4R (5301336) (60 Gallon Skid Sprayer w/5.5 HP Engine, 4-Roller Pump & Deluxe Handgun) Technical Specifications 5.5 HP Engine 4 Roller Pump 6 G.P.M. Pressure Relief Valve Deluxe
570Z Series. Reliability is simply stated in. 570Z Series 20 years of solid. performance. Add to that its. extensive product line offering and
570Z Series S P R I N K L E R S RESIDENTIAL COMMERCIAL Reliability is simply stated in 570Z Series 20 years of solid performance. Add to that its extensive product line offering and you have a successful
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
VALVES. FIMCO Code # MFG Part # std $ fp $ fp $
97 VALVES std = standard port fp = full port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS Size 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364 60543 1
Owner's Manual. Model: UTL-60-7-TSC ( ) (60 Gallon Utility Sprayer w/ 7-Nozzle Boom Assembly) Technical Specifications.
Owner's Manual Model: UTL-60-7-TSC (66) (60 Gallon Utility Sprayer w/ 7-zzle Boom Assembly) Technical Specifications 60 Gallon Corrosion-Resistant Polyethylene Tank Deluxe Pistol-Grip Handgun w/5 Ft. Hand
B E X S P RAY NOZZLES K ATA L O G N O. 60
B E X S P RAY NOZZLES K ATA L O G N O. 60 With over 50 years of design and manufacturing experience, BEX is a leader in spray nozzle and tank mixing eductor technology. Our sales specialists, engineers,
Module. Table of Contents. Section 9. Module NOTE: This section applies to applicators with bead or slot modules.
9-1 Section 9 NOTE: This section applies to applicators with bead or slot modules. Table of Contents... 9-1 Introduction... 9-3 Overview... 9-7 Service... 9-9 Adjusting a ClassicBlue Zero-Cavity... 9-9
Chemical disc filters, Arkal Amiad, w w w. a r k a l - f i l t e r s. c o m
Manual Filters For Chemical Use Chemical disc filters, Arkal Amiad, www.irrigationglobal.com w w w. a r k a l - f i l t e r s. c o m Arkal ¾ Filter for Chemical Use Catalog No. 1070 1 _ Filtration Grades
Fluid Dispensing Systems
Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028
Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
D-Net 8550 TM 3D ARM IMPACT SPRINKLER USER MANUAL
D-Net 8550 TM 3D ARM IMPACT SPRINKLER USER MANUAL V 002.01 - JULY 2017 COPYRIGHT 2016, NETAFIM NO PARTS OF THIS PUBLICATION MAY BE REPRODUCED, STORED IN AN AUTOMATED DATA FILE OR MADE PUBLIC IN ANY FORM
Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
Information Sheet Polyethylene Tank Assemblies
Information Sheet Polyethylene Tank Assemblies No. 27421 10 Gallon Tank Assembly Ultraviolet resistant, yellow polyethylene tank. Molded recesses for mounting of any LMI Series A, J, or P pump. Convenient