Anderson Greenwood PTM/PT7 Static Pressure Manifolds
|
|
|
- Aron Edwards
- 5 years ago
- Views:
Transcription
1 m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings of 20-30% when manifolding instruments by eliminating several parts used in conventional methods of piping up. Compact design requires minimum space for operation and installation. Shutoff valve, tee, calibration valve and all immediate tubing/fittings available in one simple manifold. PTM s unique valve seat can be converted from soft to hard simply by removing two insert washers. Stem and bonnet threads are rolled for increased strength, preventing galling and adding years to the useful life of the valve. Fewer leak points reduce leakage by having fewer parts to assemble. PTFE and graphite adjustable packing is easily adjusted for leak-proof, long service life. PTM s O-ring stem seal stem design isolates the stem threads from the process, preventing galling and corrosion. Back seat stem prevents blowout. General Application PTM two-valve calibration manifolds are used on static pressure transmitters, switches or gauges. The PT7 manifold is available for elevated temperatures with an integral metal seat and can be used for B31.1 applications. Available for panel or pipe stand mounting. Technical data Materials: CS, SS, Monel, Hastelloy Seats: Metal or soft Connections Instrument: ½ (15 mm) NPT Process: ½ (15 mm) NPT Pressure (max.): 6000 psig (414 barg) Temperature range: -70 to 1000 F (-57 to 538 C) Emerson. All rights reserved. VCTDS EN 16/02
2 Anderson Greenwood PTM Static Pressure Manifolds PTM dimensions, inches (mm) Instrument B Max. open Vent/test 1.25 [31.8] Block/isolate A Max. open 3 places Process Vent/test valve Vent/test port 2.50 [63.5] 0.63 [16.0] Instrument port Flow washer 0.68 [17.3] Optional soft seat Grafoil packing 2.38 [60.5] 1.00 [25.4] Block/isolate valve 0.25 [6.4] 1.00 [25.4] Process port Ø 0.28 (7.1) Mounting holes, 2 places Dimensions, inches (mm) Packing A B O-ring 2.50 (63.5) 3.75 (95.3) PTFE 3.10 (78.7) 4.35 (110.5) Grafoil 3.57 (90.7) 4.82 (122.4) Grafoil packed bonnet Note 1. Approximate valve weight: 2.0 lb (0.9 kg) inch (3.5 mm) diameter orifice. Valve C v hard seat 0.25 maximum. Valve C v soft seat 0.24 maximum. Bonnet assemblies The PTM features mini-valve bonnet technology compact design with a V tipped stem, back seat design and soft or metal seated operation. The stem threads are rolled and lubricated to prevent galling, reducing torque and providing longer service life. All mini valve designed manifolds have a unique valve seat design which may be converted from soft seat to metal simply by removing the seat and flow washer. The mini-valve bonnets come in three designs: An adjustable PTFE stem packed bonnet which is suitable for panel mounting via external bonnet threads. O-ring bonnet assemblies which use a PKF or NBR O-ring seal below the stem thread. Grafoil packing for applications with temperatures to 1,000 F. 2
3 Anderson Greenwood PTM Static Pressure Manifolds PTMV ( ) - ( ) - PM (Panel Mount) dimensions, inches (mm) NPT Typ. 3 places PTMV( )-2-PM ¼ - 18 PTMV( )-4-PM ½ - 14 Instrument Vent/test valve Panel hole ø [11.9] [4.76] max. thick panel Vent/test port 0.68 [17.3] 1.25 [31.8] Instrument port 0.63 [16.0] Vent/test Block/isolate 3.25 [82.6] 1.38 [35.1] Process 1.25 [31.8] 0.63 [16.0] 3.10 [78.7] Max. open Block isolate valve Panel nut 0.75 [19.1] ø 0.28 [7.1] thru mounting holes 2 places 1.00 [25.4] 2.50 [63.5] 1.25 [31.8] Process port Standard Materials Valve Body Bonnet Stem Flow washer 4 CS 2 A108 A108 A SS A A A SG 3 A A Monel R Monel Monel 400 Monel R405 Monel R405 Monel 400 Notes 1. Approximate valve weight: 2.7 lb (1.2 kg) inch (3.5 mm) diameter orifice. Valve C v hard seat 0.25 maximum. Valve C v soft seat 0.24 maximum. 2. CS is zinc cromate plated to prevent corrosion. 3. SG (Sour Gas) - all SS wetted parts are RC22 or less to meet requirements of NACE MR0175-latest revision. 4. Soft seated valves only. 3
4 Anderson Greenwood PT7 Static Pressure Manifolds PT7 dimensions, inches (mm) B Max. open Instrument 0.63 [16.0] 2.73 [69.3] Vent/test 1.25 [31.8] Block/isolate A Max. open Vent/test port Block/isolate valve Process Vent/test valve Bonnet assemblies 2.88 [73.2] 1.88 [47.8] 1.25 [31.8] Instrument port TYP. 3 places The PT7 is available with metal seated bonnet assemblies which have a rotating stem with free swivel ball-type seat for long service life. All stem threads are rolled and lubricated to prevent galling and reduce operating torque. The stem seal is a patented PTFE packing gland which is adjustable in service. All bonnets are assembled with a bonnet locking pin to prevent accidental removal while in service and a protective dust cap is fitted to contain stem lubricant and prevent the influx of contaminants [19.1] 1.00 [25.4] Ø 0.28 [7.1] Mounting holes 2 places The high-temperature bonnet assemblies use an ENC plated stem and bonnet incorporating adjustable graphite rings and back-up pressure rings to ensure a leak-free stem seal [48.3] Process port Standard Materials Valve 1 Body Bonnet Stem Ball Packing CS 2 A105 A108 A PH PTFE CS 2 A105 A105 A PH Grafoil /Low emissions graphite SS SS, A SS, A A PTFE SS SS, A SS, A A Grafoil /Low emissions graphite SG 3 SS, A SS, A Monel 400 Monel K500 PTFE SG 3 SS, A SS, A Monel 400 Monel K500 Grafoil /Low emissions graphite Notes 1. Approximate valve weight: 3.0 lb (1.4 kg) inch (4.8 mm) diameter orifice. Valve C v 0.52 maximum. 2. CS is zinc cromate plated to prevent corrosion. 3. SG (Sour Gas) meets the requirements of NACE MR0175/ISO (for chloride conditions 50 mg/l (ppm)) and NACE MR Dimensions, inches (mm) Packing A B PTFE 3.85 (97.8) 5.33 (135.4) Grafoil 4.50 (114.3) 5.98 (151.9) 4
5 Anderson Greenwood PTM/PT7 Static Pressure Manifolds Pressure and Temperature Ratings - PTM Packing PCTFE/Delrin seat PEEK seat/metal seat PTFE 3000 psig at 200 F 6000 psig at 200 F 6000 psig at 200 F (207 barg at 93 C) 3000 psig at 300 F 4000 psig at 500 F (414 barg at 93 C) (414 barg at 93 C) (207 barg at 149 C) (276 barg at 260 C) O-ring 3000 psig at 200 F 6000 psig at 200 F 6000 psig at 200 F (207 barg at 93 C) (414 barg at 93 C) (414 barg at 93 C) Pressure and Temperature Ratings - PT7 Valve Packing Ratings CS PTFE 6000 psig at 200 F 4000 psig at 500 F (414 barg at 93 C) (276 barg at 260 C) CS GRAFOIL /Low 6000 psig at 200 F 1500 psig at 850 F emissions graphite (414 barg at 93 C) (103 barg at 454 C) SS PTFE 6000 psig at 200 F 4000 psig at 500 F (414 barg at 93 C) (276 barg at 260 C) SS GRAFOIL /Low 6000 psig at 200 F 1500 psig at 1000 F emissions graphite (414 barg at 93 C) (103 barg at 538 C) SG PTFE 6000 psig at 200 F 4000 psig at 500 F (414 barg at 93 C) (276 barg at 260 C) SG GRAFOIL /Low 6000 psig at 200 F 1500 psig at 1000 F emissions graphite (414 barg at 93 C) (103 barg at 538 C) Note Minimum temperature for 316SS, Grafoil and PTFE packed bonnets is -70 F (-57 C). 5
6 Anderson Greenwood PTM/PT7 Static Pressure Manifolds PTM Pressure vs. Temperature Pressure psig (barg) 4200 (290) 1500 (103) 6000 (414) 5000 (345) 4000 (276) 3000 (207) 2000 (138) Delrin/PCTFE PEEK (O-ring packed) Metal seat (O-ring packed) PEEK (PTFE packed) Metal seat (PTFE packed) Metal seat (Grafoil packed w/c bdy) Metal seat (Grafoil packed w/s bdy) Metal seat (Grafoil packed w/316l bdy) Denotes intersecting data 1000 (69) (-18) (38) (93) (149) (204) (260) (316) (371) (427) (482) (538) 850 Temperature F ( C) (454) PT7 Pressure vs. Temperature Pressure psig (barg) 1500 (103) 6000 (414) 5000 (345) 4000 (276) 3000 (207) 2000 (138) 1000 (69) PT7VIC/PT7VIS PT7HIC/PT7EIC PT7HIS/PT7EIS PT7HIW / PT7EIW Denotes intersecting data (-18) (38) (93) (149) (204) (260) (316) (371) (427) (482) (538) Temperature F ( C) 850 (454) 6
7 Anderson Greenwood PTM Static Pressure Manifolds PTM - Selection Guide Example: PTM V D S SG Bonnet packing V PTFE R O-ring (SS - FKM, CS - NBR) (soft seat only) Seat material D Delrin (standard) K PCTFE E PEEK I Integral (body material) Body material C A108 S A SS M Monel 400 Connections 4 ½-inch FNPT (inlet) x ½-inch FNPT (outlet) x ½-inch FNPT (vent) 2 ¼-inch FNPT (inlet) x ¼-inch FNPT (outlet) x ¼-inch FNPT (vent) Options AM AGCO mount AMS AGCO mount kit (Stainless steel) AMV AGCO mount kit (vertical) HD Hydrostatic testing (100%) (MSS-SP-61) OC00 Oxygen clean (OC) PMI00 PMI body only SG (Sour Gas) NACE edition 2003 /MR0103 SG3 (Sour Gas) NACE MR0175/ISO (latest edition) PV Vent plug 7
8 Anderson Greenwood PT7 Static Pressure Manifolds PT7 - Selection Guide Example: PT7 V I S SG Bonnet packing V PTFE H GRAFOIL E Low emissions graphite Seat material I Integral (body material) Body material C CS S 316 SS J Hastelloy W 316L SS M Monel Connections 3TC4 ⅜-inch tube stub (inlet) x ⅜-inch tube stub (outlet) x ½-inch FNPT (vent) 4 ½-inch FNPT (outlet) x ½-inch FNPT (inlet) x ½-inch FNPT (vent) 3 ⅜ -inch FNPT (outlet) x ⅜-inch FNPT (inlet) x ⅜-inch FNPT (vent) 3TC ⅜-inch tube stub (inlet) x ⅜-inch tube stub (outlet) x ⅜-inch FNPT (vent) 3TC44 ⅜-inch tube stub (inlet) x ½-inch FNPT (outlet) x ½-inch FNPT (vent) 422 ½-inch FNPT (inlet) x ¼-inch FNPT (outlet) x ¼-inch FNPT (vent) 442 ½-inch FNPT (inlet) x ½-inch FNPT (outlet) x ¼-inch FNPT (vent) 4B2 ½-inch FSW (inlet) x ¼-inch FNPT (outlet) x ¼-inch FNPT (vent) 4TC4 ½-inch tube stub (inlet) x ½-inch tube stub (outlet) x ½-inch FNPT (vent) 4TC44 ½-inch tube stub (inlet) x ½-inch FNPT (outlet) x ½-inch FNPT (vent) Options AM AGCO mount AMS AGCO mount kit (stainless steel) AMV AGCO mount kit (vertical) BL Bonnet lock device HD Hydrostatic testing (100%) (MSS-SP-61) LAT Lockable anti tamper OC00 Oxygen clean (OC) PMI00 PMI body only SG (Sour Gas) NACE edition 2003 /MR0103 SG3 (Sour Gas) NACE MR0175/ISO (latest edition) VP Vent plug 8
9 Anderson Greenwood PT7 Static Pressure Manifolds PT7MHP - Selection Guide Power Industry Applications 1 Example: PT7MHP S XP - SG Body material C A105 S A SS Connections 3TC4 ⅜-inch tube stub (inlet) x ⅜-inch tube stub (outlet) x ½-inch FNPT (vent) 4 ½-inch FNPT (outlet) x ½-inch FNPT (inlet) x ½-inch FNPT (vent) 3 ⅜-inch FNPT (outlet) x ⅜-inch FNPT (inlet) x ⅜-inch FNPT (vent) 3TC ⅜-inch tube stub (inlet) x ⅜-inch tube stub (outlet) x ⅜-inch FNPT (vent) 3TC44 ⅜-inch tube stub (inlet) x ½-inch FNPT (outlet) x ½-inch FNPT (vent) 422 ½-inch FNPT (inlet) x ¼-inch FNPT (outlet) x ¼-inch FNPT (vent) 442 ½-inch FNPT (inlet) x ½-inch FNPT (outlet) x ¼-inch FNPT (vent) 4B2 ½-inch FSW (inlet) x ¼-inch FNPT (outlet) x ¼-inch FNPT (vent) 4TC4 ½-inch tube stub (inlet) x ½-inch tube stub (outlet) x ½-inch FNPT (vent) 4TC44 ½-inch tube stub (inlet) x ½-inch FNPT (outlet) x ½-inch FNPT (vent) Options AM AGCO mount AMS AGCO mount kit (stainless steel) AMV AGCO mount kit (vertical) BL Bonnet lock device HD Hydrostatic testing (100%) (MSS-SP-61) LAT Lockable anti tamper OC00 Oxygen clean (OC) PMI00 PMI body only SG (Sour Gas) NACE edition 2003 /MR0103 SG3 (Sour Gas) NACE MR0175/ISO (latest edition) VP Vent plug XP ASME B31.1 Notes 1. All manifolds come standard with GRAFOIL packing, integral seats, bonnet locks, and are subjected to hydrostatic testing. 2. Manifold ratings: SST 6000 psig at 100 F 2915 psig at 1000 F (414 barg at 38 C) (201 barg at 538 C) STL 6170 psig at 100 F 3430 psig at 800 F (425 barg at 38 C) (236 barg at 427 C) 9
10 2017 Emerson. All rights reserved. 10
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds PT7 PTM Product Overview The PT Two-Valve Calibration Manifolds are used on static pressure transmitters, switches or gauges. The shutoff valve,
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
Anderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
Anderson Greenwood M1/M110 Differential Pressure Manifolds
A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
ANDERSON GREENWOOD H7/H71 HAND VALVES
3 /16 (4.8 mm) orifice hard-seated hand valves for pressures to 6000 and 10000 psig (414 and 689 barg) FEATURES H7 GENERAL APPLICATION H7 series valves are designed for safe, repetitive bubble-tight closure,
Static Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
Anderson Greenwood Instrumentation Products - Manifolds and Accessories
Anderson Greenwood Instrumentation Products - Manifolds and Accessories Total Flow Control Solutions Flow, Static Pressure and Liquid Level Manifolds Flow Control ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS
ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
Kerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
Multi-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
Distributed By: M&M Control Service, Inc
The KM1 is a 3-valve manifold designed for applications where direct mounting to an instrument is impractical or undesirable. This style manifold is mounted to the lines from the instrument and signal
3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated
![3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated](/thumbs/85/92772568.jpg "3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated")
M50 and H70 ANDERSON GREENWOOD 3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated Features and Benefits Cost savings are realized as the root valves are in-line
ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold
5030/5130. Hard Seat & Soft Seat/Tip. Flow Schematic. Manifold Valves, 5-Valve Natural Gas
Manifold Valves, 5-Valve Natural Gas Hard Seat & Soft Seat/Tip 5030/5130 Flare Pattern option Flow Schematic Designed for use with differential pressure transmitters incorporating two gas applications
General Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed
VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed Catalog No. VM-3 July 2015 VMD Series Direct Mount Manifolds EN 61518: IEC 61518 standard is
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
General Specifications
General Specifications GS 22B01C06-01EN-A C13ST Manifolds for Traditional Mount Differential Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-3 and C13ST-5 manifolds are
General Specifications
General Specifications GS 22B01C05-00EN-A C13ST Manifolds for Traditional Mount Gauge and Absolute Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-2 2-Valve manifolds are
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
Recognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 Quality Service Experience www.mac-weld.com CONTENTS Introduction Page 1-2 Needle Valves Page 3-6 Gauge Valves Page
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
)SLIM LINE) MONOFLANGE VALVES
)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev MA August Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
Rosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated
Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
.187" Orifice PART NUMBER DESCRIPTION BONNET MATERIAL SEAT STEM SEAL
Options Bonnet Lock Plate Anti-Tamper Bonnet The Bonnet Lock Plate provides a more positive bonnet-locking device than the standard roll pin. The Anti-Tamper Bonnet Handle allows the bonnet stem to be
Rosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated
Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
HOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
INTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
Instrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
SAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
Instrumentation Manifolds Traditional C13WT series. For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters
Instrumentation Manifolds Traditional C13WT series For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters Introduction About Yokogawa and WIKA About the catalogue Yokogawa and WIKA have
Enclosures and Sunshades
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Enclosures and Sunshades EM Manifolds Accessories and Mounting To maintain the integrity of process measurement instrumentation, protection from the effects
Instrumentation Products Soft Seated Needle Valves and Manifolds
Instrumentation Products Soft Seated Needle Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation
Needle Valves Mini, Hard Seat
Needle Valves Mini, Hard Seat 100 SERIES Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
High-Pressure Needle Valves
www.swagelok.com High-Pressure Needle Valves Working pressures up to 4 000 psig (3100 bar) Temperatures up to 40 F (232 C) Weep holes for leak detection Packing below stem threads Nonrotating stem design
The model M Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location.
200 Series M-220 & M-222 2-Valve Manifolds The model M-220 2-Valve Manifold is designed for remote mounting of a static or gauge transmitter. This design permits the user to mount each unit separately
Page 1 Worldwide Rev e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
Double Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003
Double Block and Bleed Manifolds and Flanged Products Catalog 4190-FP October 2003 Contents Page 3 Introduction. Page 4/5 Application illustrations. Page 6 Ball valve specification. Page 7 Outside screw
we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports.
introduction we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports. KpL valve ind. co., Ltd. was established in 1986 and for
Block & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
PRECISIONISO 9001:2008
SUSTECH PRECISIONISO 9001:2008 Direct Mount Manifolds L Series Rated up to 10 000 psi Compact design Ease of use www.sustech.com sales@sustech.com l +27 11 452-9545 Contents Manifolds and Accessories Manifold
"S" Series Needle/Gauge Valves
"S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads
Hex Monoweld Valves. Built Hex tough for a lifetime of use. See how inside... www. hexvalve.com
Hex Monoweld Valves Built Hex tough for a lifetime of use. See how inside... HEXVALVE A ivision of Richards ndustries 370 Wasson Road Cincinnati, OH 45209 toll free. 800.543.73 local. 53.533.5600 fax.
Instrumentation Products. E Series Valves and Manifolds
Instrumentation Products E Series Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation Valves
Block-and-bleed valve 2-valve manifold Models IV20 and IV21
Valves and protective devices Block-and-bleed valve 2-valve manifold Models IV20 and IV21 WIKA data sheet AC 09.19 Applications Shut off and vent pressure measuring instruments For gaseous and liquid aggressive
Monoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
LNG & LPG Series. Locked Bonnet Gauge and Block & Bleed Valves. Needle Gauge Valves. Working Pressures up to 6000 psig (413 bar)
Locked Bonnet Gauge and Block & Bleed Valves LNG & LPG Series Wking Pressures up to 6000 psig ( bar) Temperature Range from -00 to 00 F (-7 to 68 C) Flow Coefficients up to.8 Needle Gauge Valves Block
Locked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold
Instrument Manifolds. V, VB, and VL Series. 2-, 3-, and 5-valve instrument manifolds
www.swagelok.com Manifolds V, VB, and VL Series 2-, 3-, and 5- instrument manifolds All 316 stainless steel construction with PTFE packing Working pressures up to 6000 psig (413 bar) Temperatures up to
TBV Instrumentation Valves
TBV Instrumentation Valves A TBV Instrumentation Valves Cameron s TBV instrumentation valves were developed in response to concerns expressed by plant engineers. Common problems such as irregular center-to-center
VN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
NEEDLE VALVE GAUGE VALVE VALVE MANIFOLD BALL VALVE ACCESSORIES
NEEDLE VLVE GUGE VLVE VLVE MNIFOLD BLL VLVE CCESSORIES Index Introduction ----------------------------- Valve Manifold VM0 ---------- Product Feature ----------------------- Valve Manifold VM0 ----------6
F20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51
Valves and protective devices Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51 WIKA data sheet AC 09.23 Applications Shut-off, pressure
One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
Gauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443
Instrument Manifold Systems
www.swagelok.com Instrument Manifold Systems Instrument, Direct, and Remote-Mount Manifolds and Modular Systems V, VB, and VL series 2-, 3-, and 5- instrument manifolds VE series 2-, 3-, and 5- direct-mount
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
WKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Reduced Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 98 inspection
CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 PRODUCTS INDEX 4
Fluid control division MANIFOLD CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 INDEX 4 ACCESSORIES MOUNTING BRACKETS 35 OVAL FLANGES 35 BLEED 35 CONDENSING POTS 36 SYPHONS 36 AIR FEED HEADERS
INSTRUMENTATION UNION BONNET VALVES. VU6 Series.
INSTRUMENTATION UNION BONNET VALVES VU6 Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @38 (100 ) Temperature rating from -53 (-65 ) to 232 (450 ) with standard PTFE packing, up
Recognized globally for our quality, service and the ability to deliver! ISO 9001:
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 www.mac-weld.com MACHINING LTD. CONTENTS Introduction Page 1-2 2 Valve Manifolds Page 3-4 3 Valve Manifolds Page 5-7
Needle Valves Mini, Hard Seat
Needle Valves Mini, Hard Seat 100 Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
Bushing Viton O-ring (Other material available) Anti-Static Device
API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Contents. General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts
Contents General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts Manifolds 4 Ordering Tree 5 Pressure vs. Temperature Ratings 6 5-Valve Manifold Overview 8 5-Valve Manifold
P R O C E S S V A L V E S. TBV Instrument Valves TBV
TBV Instrument Valves TBV TBV s Process / Instrument Valves were developed in response to concerns expressed by plant engineers. Common problems such as center-to-center spacing in Differential Pressure