WKM 320F. Flanged floating ball valves

Transcription

1 WKM 20F Flanged floating ball valves

2 Contents WKM 20F Flanged Floating Ball Valves Features and benefits Exploded views and specifications Materials list Assembly codes Wrench dimensions Dimensional data 1-in full port through 8-in 6-in reduced port Weights Stem torques and MAST

3 Features and Benefits The handle can be correctly installed only in alignment with the ball port. The valve is open when the handle is aligned with piping and is closed when the handle is perpendicular to piping. ASME Class 150 through in full port through 8-in reduced port NACE MR0175/ISO Standard antistatic grounding spring Stop plate that provides ball alignment and visual indication of open or closed position Adjustable stem packing Self-relieving seat provides protection against excess cavity pressure Standard antistatic grounding spring NACE MR0175 conformance standard on all trims WKM 20F* flanged floating ball valves satisfy a wide range of applications. Available in a variety of standard and optional materials, the valves are engineered for heavy-duty, maintenance-free performance and serve a variety of applications in virtually any industry. Chemical and petrochemical plants There is a wide range of chemical and petrochemical applications for WKM 20F ball valves. They serve in plastic plants, handling such slurries as 40% vinyl chloride in high-pressure catalyst lines, and in processes, handling dry lading such as polyethylene and polystyrene powders. Refining The WKM 20F ball valve is ideal for the refining industry. The many seats, seals, and trims available offer the versatility to handle the wide variety of products used in the refining process. Low-temperature service Standard trims accommodate temperatures to 20 degf [ 29 degc], and temperature trims are available to 50 degf [ 46 degc]. Maintenance-free performance Under most conditions, the WKM 20F ball valve will provide years of trouble-free service with no maintenance required. In some severe applications, such as handling extremely abrasive slurries at high temperature, it may be necessary to replace the seats occasionally. Seat and seal kits are available, and replacement can be done easily with ordinary tools. Sour oil and gas service WKM* valves have served for years in gathering lines, manifolds, and field processing units in sour oil and gas fields. All trim combinations conform with NACE MR0175/ISO

4 Features and Benefits Self-relieving seats A patent-pending seat design provides for automatic cavity relief without requiring a vented ball or external relief valve. API Spec 6D monogram is available upon request. Actuation friendly A variety of actuator types, including pneumatic, hydraulic, diaphragm, vane, electromechanical, and electrohydraulic, can be easily installed. Fire tested for safety All WKM 20F ball valves are qualified under API Standard 607 7th Ed. The seat and locked-in stem design contributes to its fire-tested characteristics. Should the soft seats be destroyed by fire, the ball floats downstream, providing a tight metal-to-metal seal against the lip of the seat pocket. If the tailpiece seals are destroyed, the metal-to-metal tailpiece-to-body connection retards external leakage. Adjustable, replaceable packing The inline valve stem packing options consist of PTFE and graphite. The packing is field adjustable and virtually never requires lubrication. Seat that relieves excess cavity pressure to the upstream side of the valve. Fugitive emissions WKM 20F ball valves can be supplied and certified to meet the requirements of fugitive emissions (FE) as regulated by ISO and API. Positively retained stem The stem is positively retained and cannot be removed with the valve in service. Floating ball design that delivers tight seal The ground, polished ball is free to float and mates perfectly with the conical seats for a positive, leak-proof seal. Self cleaning and self adjusting, the ball also is pressure activated the higher the line pressure, the tighter the seal. Fugitive-emissions packing arrangement. 4

5 Specifications ASME Classes 150 through 600 Operating temperatures From 50 to 400 degf [ 46 to 204 degc] Standard material Body and stainless steel Ball and stem and stainless steel 54. Retaining ring 22. Stop plate 2. Lock plate 14. Packing nut (two) 12. Packing bonnet 11. Packing compression ring 261. Packing set 01. Stem st washer 02. Stem bearing 241. Stem 24. Stop pin (two) Industry compliance American Society of Mechanical Engineers (ASME) Standards B16.5 and B16.4 Manufacturers Standardization Society Specifications MSS SP-25, 55, and 72 API Spec 607 7th Ed. fire-test specification Canadian Registration Number (CRN) API Spec 608 NACE MR0175 ANSI Standard B16.4 API Spec 6D upon request ISO or API fugitive emissions upon request European Pressure Equipment Directive (PED/CE) available upon request Gear operator option. Bill of Materials Part No. Quantity Description Body Tailpiece 151 Body stud 152 Body nut Socket-weld (SW) gasket, body to tail Ball Seat 22 2 Seat lip seal Stem Packing set (PTFE or graphite) 01 2 Stem st washer 02 1 Stem bearing 11 1 Packing compression ring 12 1 Packing bonnet 1 2 Packing stud 14 2 Packing nut 22 1 Stop plate 2 1 Lock plate 24 2 Stop pin 1 1 Lever 52 1 Ground spring, stem to ball 5 1 Grounding plunger, ball to body 54 1 Retaining ring Quantities depend on size and pressure class. Not shown. 1. Packing stud (two) 222. Seat (two) 22. Seat lip seal (two) 101. Body 190. Spiral-wound gasket 211. Ball 5. Grounding plunger 152. Body nut 151. Body stud 102. Tailpiece 5

6 Materials List Body Group Trim Number Part Carbon Steel (NACE) 24 Carbon Steel for Low Temperature (NACE) 7 Stainless Steel (NACE) 2 Carbon Steel with Coating (NACE) 26 Body A216 Grade wrought carbon A52 Grade low-temperature (WCC) wrought carbon (LCC) A51 Grade CF8M A216 Grade WCC, ZPEX coating Tailpiece A216 Grade WCC A52 Grade LCC A51 Grade CF8M A216 Grade WCC, ZPEX coating Bonnet cap Low alloy carbon steel (CS) zinc plated Low alloy CS zinc plated Low alloy CS zinc plated Low alloy CS zinc plated Studs A20 Grade L7M zinc plated A20 Grade L7M zinc plated A20 Grade L7M zinc plated A20 Grade L7M zinc plated Nuts A194 Grade L7M zinc plated A194 Grade L7M zinc plated A194 Grade L7M zinc plated A194 Grade L7M zinc plated Packing studs A20 Grade L7M zinc plated A20 Grade L7M zinc plated A20 Grade L7M zinc plated A20 Grade L7M zinc plated Packing nuts A194 Grade L7M zinc plated A194 Grade L7M zinc plated A194 Grade L7M zinc plated A194 Grade L7M zinc plated NACE indicates compliance with NACE MR0175/ISO ZPEX coating on studs and nuts available upon request. Internal Group Trim Number Ball A105 CS ENP A51 CF8M or 16 SS A105 CS ENP Stem A105 CS ENP 16 SS A105 CS ENP Ground spring INCONEL material INCONEL INCONEL Compression ring 16 stainless steel (SS) 16 SS 16 SS Thrust washer CS or TFE SS or TFE CS or TFE Low-temperature model requires 2 stainless internal group. Seal Group Trim Code Part LTF TTF CGF PGF Temperature limits 20 to 220 degf [ 29 to 104 degc] 50 to 400 degf [ 46 to 204 degc] 50 to 400 degf [ 46 to 204 degc] 20 to 400 degf [ 29 to 204 degc] Seat Delrin material Filled PTFE High-performance PTFE PEEK Packing PTFE PTFE Graphite Graphite Body seal Spiral-wound gasket Grafoil or SS Spiral-wound gasket Grafoil or SS Spiral-wound gasket Grafoil or SS Spiral-wound gasket Grafoil or SS Actuator Trim Codes Actuator Codes Part (Body) Mounting bracket Bolting Set screw Stem adapter Actuator Handwheel Worm Gear For All Body Material Codes As selected Actuator Codes (Wrenches) Part (Body) Wrench For All Body Material Codes Wrench head Steel Wrench handle Wrench handle pin Capscrew Alloy steel Stop plate 6

7 How to Order Flanged (two-piece cast) Example Assembly base number Actuation Pressure class Trim material End connections Packing and gasket material Seat insert material Assembly Base Number Size, in Port Base Number 1 FP /2 FP RP 2980 FP RP FP RP FP RP FP LP FP SP RP LP RP SP Pressure Class 1 Class 150 WKM 2 Class 00 WKM Class 600 WKM End Connection 1 RF flange 5 RTJ flange (Class 600 and above) Body and Tailpiece Material 1 (24) 2 Stainless steel (2) Low-temp carbon steel (7) 4 / internal coating (26) Seat Insert Material 1 Delrin (L) 2 Filled PTFE (T) (Class 150 and 00 only) PEEK (P) 4 High-performance PTFE (C) (Class 600) Packing and Gasket Material 1 PTFE (T) 2 Graphite (G) FE packing (E) Trim Material 1 / 1-mm ENP (24) 2 Stainless steel (2) Actuation 1 Bare stem, less gear bracket (BS) 2 Wrench (WR) to 4 in 150 Gear operated with lock device (WG) 4 Less gear, including WG mounting bracket (LG) 5 Wrench head (WH) 6 Wrench head with pipe (WHP) See price sheet for wrench/wrench head options LP CL SP CL 150 only LP CL 150 and 600 only SP 150 and 00 only Trim Codes Size, in [mm] Example 2 20F 600 RF RF 24 L T F 24 LG Model Pressure Class End connections Body group Actuation Internal group Fire-tested Packing group Size, in [mm] 1 to 8 6 [50 to ] Model 20F Pressure Class 150 to 600 End Connections RF RF Body Group 2 Stainless steel NACE 24 NACE 7 Carbon lowtemp. NACE Seat Group L Delrin T Filled PTFE C Highperformance PTFE P PEEK Packing Group T PTFE G Graphite E FE packing Fire tested F Internal Group 2 Stainless steel NACE 24 NACE Actuation LG Less gear WG Worm gear WH Wrench head BS Bare stem WHP Wrench head with pipe 7

8 Dimensional Data 1-in Full Port Through 8 in 6 in Reduced Port 1 -in full port through 8-in reduced port. ASME Classes 150, 00, and 600 R Hole size (number of holes) M Bolt circle diameter Q Hole size (number of holes straddle centerline) P (flats) N L Y K J Z H S B Bore dia. BB diameter A Valve with wrench (lever). Valve with wrench hand. V U J T W A Valve with gear. X 8

9 Dimensions WKM 20F 150 Valve Dimensions Size, in [mm] 1 [25] 1.5 [8] 2 1 1/2 [50 8] 2 [50] 2 [80 50] [80] 4 [100 80] 4 [100] 6 4 [ ] 6 [150] 8 6 [ ] A B BB H J K L M N P Q R S T U V W X Y Z RF JF 5 [127] [178] 7 [178] 8 [20] 8 [20] 9 [229] 9 [229] [267] [94] 18 [457] 1.01 [26] 1.51 [8] 1.51 [8] [26] 1.51 [8] [20] 1.99 [51] 2.76 [70] 2.76 [70].46 [88].46 [88] 8.69 [221] 8.69 [221] 11.8 [289] 11.8 [289] 14.9 [79] 14.9 [79] 4.51 [115] 4.51 [115] 5.89 [150] 5.89 [150] 1.72 [49] 1.72 [49].54 [90] 4.50 [114] 4.50 [114] 5.65 [14] 5.65 [14] 7 [178] 7 [178] 9.2 [27] 9.2 [27] 12.1 [1] 12.1 [1] 0.55 [14] 0.71 [18] 0.71 [18] 1.10 [28] 1.10 [28] 1.89 [48] 1.89 [48] 2.1 [54] 2.76 [70] 2.76 [70].8 [86].8 [86] [125] 4.92 [125] 0.81 [21] 1.21 [1] 1.21 [1] 1.8 [5] 1.8 [5] 1.6 [41] 1.6 [41] 1.94 [49] 1.94 [49] [11] 0.55 [14] 0.55 [14] 0.67 [17] 0.67 [17] 1.06 [27] 1.06 [27] (4) 0.8 dp (4) 0.44 dp (4) 0.44 dp (4) 0.41 dp (4) 0.41 dp (4) 0.6 dp (4) 0.6 dp (4) 0.75 dp (4) 0.75 dp 0.81-(4) 0.81-(4) 0.19-(2) 0.1 dp 0.19-(2) 0.1 dp 0.19-(2) 0.1 dp 0.25-(2) 0.8 dp 0.25-(2) 0.8 dp 0.1-(2) 0.8 dp 0.1-(2) 0.8 dp 0.44-(2) 0.6 dp 0.44-(2) 0.6 dp 0.6-(2) 0.81 dp 0.6-(2) 0.81 dp 8 [20] 10 [254] 10 [254] 12 [05] 12 [05] 7.91 [201] 7.91 [201] 10.1 [217] 10.1 [217] 1.56 [44] 1.56 [44] [85] [87] [41] [41] [76] [76] 1.1 [294] 1.1 [294] 20 [56] 20 [56] 4.65 [118] 5.85 [149] 5.85 [149] 7.27 [185] 7.27 [185] WKM 20F 00 Valve Dimensions Size, in [mm] 1 [25] 1.5 [8] 2 1 1/2 [50 8] 2 [50] 2 [80 50] [80] 4 [100 80] 4 [100] 6 4 [ ] 6 [150] 8 6 [ ] A B BB H J K L M N P Q R S T U V W X Y Z RF JF [191] [292] 8.50 [216] [282] 11.1 [28] 12 [05] 12 [05] [40] [40] [191] 11.6 [295] 1.01 [26] 1.51 [8] 1.51 [8] [26] 1.51 [8] [104] 4.08 [104] 2.9 [61].08 [78].08 [78].70 [94].70 [94] 10.6 [270] 10.6 [270] 1.4 [41] [41] 5.14 [11] 5.14 [11] 6.22 [158] [10] 15.4 [92] 15.4 [92] 4.12 [105] 5.27 [14] 5.27 [14] 6.16 [156] 6.19 [157] 8.57 [218] 8.57 [218] [275] [275] [58] [58] 0.71 [18] 1.10 [28] 1.10 [28] 1.89 [48] 1.89 [48] [70].8 [86].8 [86] [125] 4.92 [125] 1.21 [1] 1.8 [5] 1.8 [5] 1.6 [41] 1.6 [41] 1.94 [49] 1.94 [49] [76] [76] 0.55 [14] 0.67 [17] 0.67 [17] 1.06 [27] 1.06 [27] (2) (4) 0.8 dp 0.1 dp (2) (4) 0.6 dp 0.8 dp (2) (4) 0.6 dp 0.8 dp (4) 0.6 dp 0.1-(2) 0.8 dp (2) (4) 0.6 dp 0.8 dp (2) (4) 0.75 dp 0.6 dp (2) (4) 0.75 dp 0.6 dp 0.81-(4) 0.81-(4) 0.81-(4) 0.81-(4) 0.6-(2) 0.81 dp 0.6-(2) 0.81 dp 0.75-(2) 1.06 dp 0.75-(2) 1.06 dp 10 [254] 12 [05] 12 [05] 16 [406] 16 [406] 9.56 [24] 9.56 [24] [06] [06] [4] [4] [482] [482].62 [92].62 [92] [6] [6] 20 [56] 20 [56] 5.48 [19] 6.89 [175] 6.89 [175] 7.61 [19] 7.61 [19] 9

10 Dimensions WKM 20F 600 Valve Dimensions Size, in [mm] 1 [25] 1.5 [8] 2 1 1/2 [50 8] 2 [50] 2 [80 50] [80] 4 [100 80] 4 [100] 6 4 [ ] 6 [150] 8 6 [ ] A B BB H J K L M N P Q R S T U V W X Y Z RF JF 8.50 [216] 9.50 [241] 8.50 [216] [292] 14 [56] 14 [28] 17 [42] 17 [42] [558] 22 [559] 26 [660] 8.50 [216] 9.50 [241] 1.01 [26] 1.51 [8] 1.51 [8] 11.6 [295] [59] 14.1 [59] [45] 17.1 [45] 2.0 [51.6] 2.0 [51.6] [102.4] 4.0 [102.4] 22.1 [562] 6.00 [152.4] 8.06 [204.8] 1.01 [25.7] 1.51 [8.4] 2.0 [51.6] 2.0 [51.6] [104] [256] 2.9 [61].08 [78].08 [78].70 [94].70 [94] 10.6 [270] 10.6 [270] 1.4 [06] 1.4 [06] 5.14 [11] 5.14 [11] [10] [10] 15.4 [92] [418] 4.12 [105] 5.27 [14] 5.27 [14] 6.19 [157] 6.19 [157] 8.57 [217] 8.57 [217] [275] [275] [58] 15.1 [84] 0.71 [18] 1.10 [28] 1.10 [28] 1.89 [48] 1.89 [48] [70].8 [86].8 [86] [125] 4.92 [125] [1] 1.8 [5] 1.8 [5] 1.6 [41] 1.6 [41] 1.94 [49] 1.94 [49] [76] [76] 0.55 [14] 0.67 [17] 0.67 [17] 1.06 [27] 1.06 [27] 0.25-(4) 0.8 dp 0.8-(4) 0.6 dp 0.8-(4) 0.6 dp 0.8-(4) 0.6 dp 0.8-(4) 0.6 dp 0.50-(4) 0.75 dp 0.50-(4) 0.75 dp 0.81-(4) 0.81-(4) 0.81-(4) 0.81-(4) 0.19-(2) 0.1 dp 0.25-(2) 0.8 dp 0.25-(2) 0.8 dp 0.1-(2) 0.8 dp 0.1-(2) 0.8 dp 0.45-(2) 0.6 dp 0.45-(2) 0.6 dp 0.6-(2) 0.81 dp 0.6-(2) 0.81 dp 0.75-(2) 1.06 dp 0.75-(2) 1.06 dp 9.56 [24] 9.56 [24] [06] [06] 10 [254] 12 [05] 12 [05] 16 [406] 16 [406] 1.72 [45] 1.72 [48] [4] [4] [9] [9] [482] [482] [76.2] [76.2].6 [92.1].6 [92.1] 1.1 [8] 1.1 [8] 16.4 [415] 16.4 [415] 20 [508] 20 [508] 0 [762] 0 [762] 5.48 [19] 6.89 [175] 6.89 [175] 7.61 [19] 7.61 [19] 10

11 Torque Estimation and MAST Delrin or Teflon Seat with Teflon Stem Packing Valve Port Size, in Pressure Class Gauge Pressure (P), psi Break Torque at Max. P, in.lbf Run Torque at Max. P, in.lbf MAST, in.lbf , / , , , , , ,500 1,289 65, , , , , ,500, , , , ,094 1,05 15, ,500 7,82 1,727 15, ,446 2,002 15, ,897,249 40, ,500 20,12 4,241 40,040 Maximum allowable stem torque (MAST). Delrin or Teflon Seat with Graphite Stem Packing Valve Port Size, in Pressure Class Gauge Pressure (P), psi Break Torque at Max. P, in.lbf Run Torque at Max. P, in.lbf MAST, in.lbf , / , , , , ,98 712, ,480 1,84 778, ,95 877, ,47 1,521 6, ,480 4,66 1,68 6, ,999 1,759 6, ,874 2,850 15, ,480 9,09,185 15, ,082,841 15, ,242 6,15 40, ,480 2,75 6,980 40,040 Weights Valve Size, in [mm] Weight, lbm [kg] [25] 10.5 [4.8] 18.2 [8.] 24 [10.9] 1.5 [8] 21.9 [9.9] 4.1 [15.5] 42.9 [19.5] 2 11/2 [50 8] 26.1 [11.8] 8.9 [17.7] 48.7 [22.1] 2 [50] 5.4 [16.1] 47. [21.4] 60.1 [27.2] 2 [80 50] 46.1 [20.9] 66 [29.9] 8 [7.6] [80] 65.2 [29.6] 10.1 [46.7] [56.6] 4 [100 80] 75.7 [4.4] [56.6] [77.9] 4 [100] [5] 170. [77.] 245 [111.1] 6 4 [ ] 19. [6.2] 222 [100.7] 44. [156.2] 6 [150] [122.2] 67.9 [166.9] [248.] 8 6 [ ] 56 [161.5] [205.] [00.2] 11

12 WKM 20F cameron.slb.com/valves *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2018 Schlumberger. All rights reserved. 17-VL