RAM Company USA Products Line
|
|
- Kathryn Blankenship
- 6 years ago
- Views:
Transcription
1 RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator
2 Trunnion Mounted Ball Valves Main Features DOUBLE PISTON EFFECT The seat rings may be modified to perform the DOUBLE PISTON EFFECT on customer's requirement. In this case, the pressure acting on both the external and internal side of the seat rings push them against the ball. Therefore each seat grants the required tightness. This design feature allowed an additional sealing function, but to release the possible over pressure developed in the body cavity it is necessary to use a safety relief valve on the body. STEM SEALING The perfect sealing is granted by the use, as a standard feature, of the two O-rings and a graphite gasket retained by stem cover. The graphite gasket can be changed with the valve in line and the ball in any position, but this is done after having release pressure between upper O-ring and graphite gasket. The stem seals can be replaced with the valve under pressure and the ball in fully closed or fully opened position and the pressure in the body cavity has been completely released. BODY SEALING Two O-rings and graphite gaskets placed at joins of the body components guarantee zero leakage.
3 Trunnion Mounted Ball Valves Main Features FLOATING SEAT WITH FIRE SAFE DESIGN Independent floating seat rings assure the required bi-directional tightness at every pressure in the pressure range of the valve. The seat rings are spring loaded to greant the required tightness even at very low pressure. If the seats are destroyed by abnormal heating in an emergency such as a fire etc. the seat rings will move to the ball by compression on springs and fluid, then temporary sealing surface is provided by metal to metal contact between the ball and seat rings(metal seal surface are mechanized for the seat rings), and the amount of leakage will be minimized. This conformes to API607 fire safe requirements. SINGLE PISTON EFFECT WITH PRESSURE SELF- RELIEF Foe the RAM Valve USA standard trunnion mounted ball valve, each seat ring performs the SINGLE PISTON EFFECT. Under such circumstance the pressure acting on the seat rings force pushing the seat to the ball. When the pressure is s applied on the external side of the seat rings the required tightness is granted. Should the pressure of the fluid inside the valve body exceeds the line pressure, the force which acts on the seat rings by the cavity fluid does eliminate the spring elasticity and the fluid so that make the eat clearance between the seats and ball. Upon such clearance, seats provide automatic pressure relief from the body cavity to the pipeline.
4 Trunnion Mounted Ball Valves Main Features EMERGENCY SEAL RECOVERY When leakage occurs at the seat and gland due to damage, leaks from the seal can be temporarily stopped by injection of sealant into the secondary seal system. The sealing action of one O-ring or NPT only and one ball inside is the standard feature of the emergency sealant, but with two O-rings and two balls inside available also on customer's requirement. ACTUATION RAM Company USA trunnion mounted ball valves are designed to be operated by manual operators such as wrench or gear operator, the use of wrench is limited to bore size and pressure class equal or smaller than: 6" -CLASS 150LB 6" -CLASS 300LB 4" -CLASS 400LB 4" -CLASS 600 LB 2" -CLASS 900LB 2" -CLASS 1500LB For valves which operated by wrench can also be changed to gear operator on customer;s requirement. Actuators of valves can be supplies with Electric actuator, Pneumatic actuators and Gas over oil actuators. Gear operators can be easily removed in service and replaced by actuator.
5 RAM COMPANY USA W HEN T HE OTHERS D ON T M EASURE U P In traditional trunnion ball valve design, the stem takes almost all of the force caused by the line pressure, and then friction that is generated by this also causes the high operating torque. With our new designs, the trunnion rotates on PTFE bearings, thus minimizing the friction caused by the side thrust which comes from the line pressure on the ball.
6 Trunnion Mounted Ball Valves Main Features Dependable And Easy Operation The stem bearing and thrust bearing are supplied with stainless steel backed reinforced PTFE, which provide reliable strength are little operation torque, assure dependable and easy operation. Anti-static Device Possible static electricity can be conducted away by the spring through the stem, body and pipe. THROUGH CONDUIT Besides a full bore, the valve fluid passage is aligned with the pipe inner diameter so as to decrease flow resistance and easy to clean pipe with a pig or sphere by passing through the pipeline. DOUBLE BLOCK & BLEED The ball with fully opened and closed, fluid is accumulated in the body cavity by the upstream and downstream seats sealing, then the contaminations can be easily drained away by the vent plug: leaks and damage to the seat can be checked in advance; packing or other gland seals can be changed under pressure.
7 Bolted Body Side Entry Forged Steel Ball Valve
8 Dimensions of Side Entry Forged Steel Trunnion
9 Bolted Body Side Entry Forged Steel Ball Valve
10 Dimensions of Side Entry Forged Steel Trunnion
11 Dimensions of Side Entry Forged Steel Trunnion
12 Dimensions of Side Entry Forged Steel Trunnion
13 Dimensions of Side Entry Forged Steel Trunnion
14 Dimensions of Side Entry Forged Steel Trunnion
15 Dimensions of Side Entry Forged Steel Trunnion
16 Technical Specification The basic standards we used during the design, manufacturing and testing of RAM Valve USA are: API: 6D-6FA Q1 BS: 5351 ANSI: B16.5-B16.10-B16.25-B16.34 ASME: Section V Section VIII Section IX MSS: SP6-SP25-SP45-SP55-SP61-SP72 NACE: MR ISO: 5211
17
18 How To Order Model Number Coding System ANSI RATING VALVE TYPE BODY MATERIAL TRIM MATERIAL END CONNECTION SEAT MATERIAL SEAT MATERIAL SEAL MATERIAL OPERATOR
VELAN TRUNNION-MOUNTED
VELAN TRUNNION-MOUNTED Velan s standard trunnion-mounted ball valves offer increased value by incorporating advanced design features. TRUNNION-MOUNTED BALL The ball is fixed and the seat rings are floating,
More informationPRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationSlab & Double Expanding Gate Valves
Slab & Double Expanding Gate Valves Double Expanding Characteristics The main feature of a double expanding gate valve is the 2 pieces obturator that guarantees a simultaneous mechanical seal both in the
More informationThrough Conduit Gate Valves Slab & Expanding
Through Conduit Gate Valves Slab & Expanding Through Conduit Slab Gate valve Slab Gate Valves are manufactured with a full bore port, rising stem OS&Y and with floating seats and gate, pressure energized,
More informationBALL VALVES AND ACTUATORS E-CATALOG
BALL VALVES AND ACTUATORS E-CATALOG CONTENTS INTRODUCTION 3 MODEL SYSTEM 3-5 FLOATING TYPE SOFT SEATED BALL VALVE 6-8 CAST STEEL TRUNNION MOUNTED BALL VALVE 8-10 FORGED STEEL TRUNNION MOUNTED BALL VALVE
More informationTM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
More informationFloating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
More informationContents. Dimensions and weights
G4N Gate Valves Through-conduit, double block-and-bleed slab gate valves with fully protected seat faces for long-lasting, drop-tight shutoff in liquid pipelines Contents General information 3 Standard
More informationBALL valve FLOATING BALL VALVE
BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range
More informationGROVE B4, B5 and B7 Side-entry Ball Valves
GROVE B4, B5 and B7 Side-entry Ball Valves Table of Contents GROVE B4, B5 and B7 SIDE-ENTRY BALL VALVES Features and Benefits Applications...1 GROVE B4 Design Features...2 Materials Specifications...4
More informationRAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
More informationE N G I N E E R E D V A L V E S. B4, B5 & B7 Side Entry Ball Valves GROVE
B4, B5 & B7 Side Entry Ball Valves TABLE OF CONTENTS B4 B5 B7 SIDE ENTRY BALL VALVE FEATURES AND BENEFITS General Information 1 B4 Design Features 2 & 3 Valve Assembly and Cross Section 4 Dimensions and
More informationTHROUGH CONDUIT VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES THROUGH CONDUIT VALVES Ed. 01/DIC-2004 SITINDUSTRIE reserves the right to change, without notice, 1/14 SITINDUSTRIE TRIE VALVE DIVISION We are pleased to introduce you to the
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationTRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type
TRUNNION MOUNTED BALL VALVES API 6D & API 6A Side_Entry Ball Valve SE type Stem Stem Seals Body / Closure Gasket Ball Seat Seat Seal Side_Entry Ball Valve SE type TECHNICAL DESCRIPTION Description: ON/OFF
More informationFully Welded Ball Valves
Fully Welded Ball Valves API6D & API6D SS COMPANY PROFILE: Established: 1956, Family Owned and Operated Managing Director: Thomas Böhmer PhD Eng. (Dr. Ing.-Germany) Employees: 270 Annual Sales: Facilities:
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
More informationIntroduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range...
CATALOGUE CONTENTS Introduction... 3 Certifications...4-5 References Standards... 6 Ball Valves... 7 Trunnion Mounted Ball Vaves... 8 Product Range... 9 Available Design Options... 10 Quality & Testing...
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationKE Series. Through Conduit, Double Expanding Gate Valves
KE Series Through Conduit, Double Expanding Gate Valves The KE Series is an advanced API 6D designed gate valve that provides a tight mechanically activated seal. It has double sealing, bi-directional
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationInternational Standard Valve, Inc. Slab and Expanding Gate Valves
International Standard Valve, Inc. TM ISV Series GTDS & GTDE Slab and Expanding Gate Valves 2 through 36 ASME Class 150-2500 Top Entry Bolted Body Flanged & Weld Ends API 6D Fire Safe Design NACE is a
More informationPig Valves. Complete Solutions for Industrial Valves NEWAY VALVE
Pig Valves Pig Valves Complete Solutions for Industrial Valves NEWAY VALVE Cat.no.:E-PV-2005 Introduction 1 Quality Commitment 2 How to Order 3 4 ~ 5 Product Introduction Material Specifications Complete
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationLined Valves for High-corrosion and Heavy Capacity. Electronic Data Testing Centre For High Pressure Oil Gas Seal 15000PSI XMAS TREE UP DOWN TOP
Lined Valves for High-corrosion and Heavy Capacity 15000PSI XMAS TREE Electronic Data Testing Centre For High Pressure Oil Gas Seal MSP/DRILEX (China) Inc. INTRODUCTION WB Ball Valves ZN Choke Valves (Needle
More informationBody Body Cap O-Ring Ball seat Packing Seat spring Cap Ball seat Retainer gland Packing Seat spring Ball Seat retainer Line pressure Ball Line pressure Cavity pressure Ball seat Seat retainer Cavity pressure
More informationCAMERON Fully Welded Ball Valves
CAMERON Fully Welded Ball Valves Engineered for heavy duty, limited maintenance performance, with the strength of forged components and a lightweight, compact, spherical design Table of Contents CAMERON
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationCRYOGENIC. Italian Manufactured, Italian Quality
Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction
More informationFully Welded Ball Valves
Fully Welded Ball Valves Company s Profile Established:..............1956, family owned company Managing Director:.....Dr. Ing. Thomas Böhmer Employees:...............250 Annual turnover:........60 Mill.
More information9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
More informationCLASS 150 & 300 REDUCED BORE BALL VALVES
CLASS 150 & 300 REDUCED BORE BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 503 507 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL A:
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
More informationFo ge Steel Floating Ball Valves
Fo ge Steel Floating Ball Valves 26 Design and Inspection Standard: Pressure-Temperature Ratings Shell Wall Thickness Face-to-face Dimensions End connection Dimensions Pressure Test Fire Safe Test Marking
More informationThree Piece Forged Trunnion Mounted Ball Valve
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded
More informationBULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
More informationStandard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
More informationDesign & Technology in Valves
Design & Technology in Valves Ibor has been involved in many large international projects with the world s leading EPC Company overview Ibor manufacture Ball valves, Butterfly valves, Gate Valves, Check
More informationVer Trunnion Ball Valve INSTALLATION, OPERATION AND MAINTENANCE MANUAL FBV/IOM/BA02
Ver. 2008 Trunnion Ball Valve INSTALLATION, OPERATION AND MAINTENANCE MANUAL FBV/IOM/BA02 TABLE OF CONTENTS 1 APPLICATIONS...2 1.1 Applications...2 1.2 Performance Specifications...2 2 APPLICABLE STANDARDS...2
More informationSOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES
CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates
More informationFully Welded Ball Valves
Fully Welded Ball Valves Company s Profile Established:... 1956, family owned company Managing Director: Dr. Ing. Thomas Böhmer Employees:... 300 Annual Turnover:... 60 Mill. EUR Production Area:... 269000
More informationMARPAC K SERIES. Full Bore Fire Safe Flanged Ball Valves
MARPAC K SERIES Full Bore Fire Safe Flanged Ball Valves The Flowserve Marpac flanged full bore valve range provides customers with specification compliant product with long service free life resulting
More informationTECHNICAL BULLETIN. Valbart TCSGV. Through Conduit Slab Gate Valve. Experience In Motion
TECHNICAL BULLETIN Valbart TCSGV Through Conduit Slab Gate Valve Experience In Motion Tight shutoff in liquid or gas services The Valbart TCSGV through conduit slab gate valve is manufactured and tested
More informationMV1. Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer. Cert. No License No. 6D-0840
MV1 Cert. No. 224939 License No. 6D-0840 0062 Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer INTRODUCTION MIR VALVE Sdn. Bhd. (MIR VALVE) was incorporated on 27 December, 2006, obtained
More informationTECHNICAL BULLETIN. Valbart TM Through conduit slab gate valve. Experience in Motion FCD VBENTB A4 - (9/16)
Valbart TM Through conduit slab gate valve TECHNICAL BULLETIN FCD VBENTB1013-01-A4 - (9/16) Experience in Motion Valbart Through Conduit Slab Gate Valve The Valbart TCSGV is a fabricated body through conduit
More informationBVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12
The BVM Series of Flanged Industrial Ball Valves are ideally suited to a wide range of steam and water applications that require a high degree of rangeability. These valves provide exceptional characterized
More informationEXPG SBG API 6D EXPANDING/ SLAB GATE VALVES SERIES DEPEND ON US. WE CAN HANDLE THE PRESSURE.
API 6D Expanding/ Slab Gate Valves ANSI 150-300-600-900-1500 SERIES 2-36 EXPG SBG > Control > Flow Quality > lit API 6D EXPANDING/ SLAB GATE VALVES Providing Hundreds of Products. Supporting Thousands
More informationVal-Matic QuadroSphere Trunnion Mounted Ball Valve
Manual No. QS-OM1-1 Val-Matic QuadroSphere Trunnion Mounted Ball Valve Operation, Maintenance and Installation Manual INTRODUCTION... 2 RECEIVING AND STORAGE... 2 INSTALLATION... 2 DESCRIPTION OF OPERATION...
More informationWKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
More informationIMO-200EN 09/2010. Trunnion mounted forged ball valves Model FF and GG. Installation, Maintenance and Operating Instructions IMO-200EN 09/2010
IMO-200EN 09/2010 Trunnion mounted forged ball valves Model FF and GG Installation, Maintenance and Operating Instructions IMO-200EN 09/2010 2 IMO-200EN Table of Contents I GENERAL INFORMATION...................
More informationVerifiable and Zero Leakage Design. PosiWell Pte Ltd. No. 9A Joo Koon Crescent Singapore Registration No N. Innovation By Design
Verifiable and Zero Leakage Design PosiWell Pte Ltd Asia Pacific Regions Europe / USA Regions No. 9A Joo Koon Crescent Singapore 629023 Registration No. 201221185N Alfred Tan Leon Niessen PosiWell patented
More informationForged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationBall Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
More informationEXECUTIONS DBBV S t a n d a r d e x e c u t i o n Part no. Description
Double Block and Bleed Dual Expanding Plug Valve EXECUTIONS DBBV S t aa n d aa rr d ee xx ee cc u t i o n Part no. Description 1 Body 2 Lower plate 3 Upper plate 4 Plug 5 Slip 6 Seat seal 7 Stem 8 Yoke
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationVALVES API 6A Compact Ball Valves
VALVES API 6A Compact Ball Valves Space and Weight Saving Zero Leakage and Superior Performance The Standard in Non-Standard Valve Production www.uscortec.com Compact Ball Valves CORTEC Compact Ball Valves
More informationM&J Valve Product Overview
M&J Valve Product Overview M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SPX FLOW, M&J Valve meets or exceeds the quality
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationVALVITALIA - DELTA PLUG VALVE CATALOGUE TYPE 24/28 SERIES & 22
VALVITALIA - DELTA PLUG VALVE CATALOGUE TYPE 24/28 SERIES & 22 Complete valve packages including: Actuation and controls Stem extensions NDE testing Special coatings Subsea service DELTA Valves, part of
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
More informationT-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
More informationFLANGED 150 & 300 FULL PORT BALL VALVES
FLANGED 150 & 300 FULL PORT BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED STEEL BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 25A 25J 402 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationBall Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
More informationGWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002
GWC Italia Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide
More informationInstrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
More informationGWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002
GWC Italia Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 2 GWC ITALIA Proven technology for individual valve solutions
More informationKF Series T Ball Valves
K Series T Ball Valves Superior luid Control Products for the Petrochemical and Industrial Markets Series T Ball Valves This top entry valve with a one-piece trunnion supported ball conforms to API specifications
More informationFull welded ball valve
Your Professional Valve Solution Full welded ball valve Tipvalve is specialized in industrial valves production, research and development, sales and service. Offer the valve solution in rigorous working
More informationGROVE Valves. Durable, dependable technology in severe service conditions
GROVE Valves Durable, dependable technology in severe service conditions Contents History.......................................................................................2 GROVE IST* Integrated Seat
More informationMCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
More informationBONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404
BONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404 BONETTI Fully Welded trunnion ball valves The best solution to avoid fugitive emission in gas or underground applications The BONETTI s fully
More informationBALL VALVE MODEL SCHEDULE ILLUSTRATION
Steinbock valves BA VAVES BA VAVE MODE SCHEDUE IUSTRATION 1. Codes of Nominal Diameter British series indicated by Axx in value, and metric series indicated by Gxx mm value. 2. Codes of Driving Modes (For
More informationBall Valves SMART IN FLOW CONTROL
all Valves SMART IN FLOW CONTROL COMPANY OVERVIEW Ringo Válvulas (RV) is located in the industrial city of Zaragoza, Spain. Since its establishment RV has designed and manufactured its own cast and forged
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationBULLETIN FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES
BULLETIN 45.00-1 FEBRUARY 2009 BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in the chemical,
More informationThe Company LCM ITALIA, which is part of CHERO group, was established
Contents oreword Applicds Quality Assurance and Certification Technical Features of Floating Ball Valve Assembly Drawing of Floating Ball Valve Standard Materials selection of Floating Ball Valve Production
More informationWorcester Controls F819/829. Full Bore Firesafe Flanged Ball Valves
Worcester Controls F819/829 Full Bore Firesafe Flanged Ball Valves With the Series 819/829 designed to BS EN ISO 17292, Flowserve Worcester Controls brings to the market a full bore valve which combines
More informationInstallation, Operation and Maintenance Manual for the HE Series
Installation, Operation and Maintenance Manual for the HE Series High Performance Butterfly Valve "Double Offset" CONTENT IOM-HP-100614-1 1. INTRODUCTION 1.1 GENERAL NOTE 1.2 STRUCTURE & TYPE 1.3 OPERATION
More informationWEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
More informationDouble Block & Bleed Pipeline Ball Valves Taurus Series
Double Block & Bleed Pipeline Ball Valves Taurus Series General Features Features Designed in accordance with Industry standards i.e. ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313 Full Bore Meets
More informationSide Entry Trunnion Mounted. Ball Valves. Floating
Side Entry Design: 2 or 3 pieces (Bolted Body or Fully Welded) Size/Class: - ANSI/ASME classes from 150 to 4500 - Sizes from ½ to 56 according to API 6D - API classes from 3000 to 15000 - Sizes up to 11
More informationBONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404
BONETTI TRUNNION MOUNTED FULLY WELDED BALL VALVES API 6D-0404 BONETTI Fully Welded trunnion ball valves The best solution to avoid fugitive emissions in gas or underground applications The BONETTI s fully
More informationValves for Nuclear Power. Zero Leakage Valve Solutions
ValvTechnologies provides solutions for vent, drain, isolation and control applications in nuclear generation: ASME III Class 1, 2, and 3 Valves 10CFR50 Appendix B Safety Related Program ASME/ANSI Class
More informationDOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
More informationBulletin: Floating Ball Valve. Tartarini Floating Ball Valve. Introduction. Features and Benefits
Tartarini Floating Ball Valve Bulletin: Floating Ball Valve May 2011 Figure 1. Tartarini Floating Ball Valve Introduction Tartarini Floating Ball Valve is a general-purpose valve. It is used for long range
More information