KF Series T Ball Valves

Size: px
Start display at page:

Download "KF Series T Ball Valves"

Transcription

1 K Series T Ball Valves Superior luid Control Products for the Petrochemical and Industrial Markets

2 Series T Ball Valves This top entry valve with a one-piece trunnion supported ball conforms to API specifications 6A, 6D and ANSI B Devlon seats are standard. All seats are retained in metal holders which are spring-loaded against the ball for low pressure, firesafe sealing. Series T valves are offered in: 2" thru 16" class 600, 2" thru 12" class 900, 1500 and 2500, 2" thru 7 1 /16" API 6A class 2000, 3000 and General Design eatures One-piece flanged top-entry trunnion design Double block and bleed One-piece ball and stem assures precise positioning Anti blowout one-piece ball/stem design O-rings plus firesafe packing prevents leakage Corrosion resistant low friction bearings Inconel wave springs provide upstream and downstream sealing Stainless Steel Sealant injection fittings for emergency stem or seat sealing Inline repairable due to patented seat retainer design Minimized torque required to open and close valve Anti-static grounding between ball, stem and body Integral top works direct mounting pad 8" & larger valves are equipped with lifting lugs ANSI B16.34 API 6D, API 6A, 607 and 6A NACE MR0175 CSA- Z CE Marked (P.E.D. 97/23/EC, Cat. 3) Contents iresafe unction Before After In case of fire and seat construction damage, firesafe requirements are accomplished with automatic metal-tometal positive sealing. General Design eatures , 3 Technical Seating eatures Applicable Standards Series T Assembly Part Number Codes Series TW Assembly Part Number Codes Component Parts Dimensional Data API 6D & ANSI B16.34 Class 600 (in./mm) API 6D & ANSI B16.34 Class 900 (in./mm) API 6D & ANSI B16.34 Class 1500 (in./mm) API 6D & ANSI B16.34 Class 2500 (in./mm) API 6A Class 2000, 3000 & 5000 (in.) API 6A Class 2000, 3000 & 5000 (mm) API 6D & ANSI B16.34 Class 600 (in./mm) (Ser. TW) Topworks and Stem Torque (in.) Topworks and Stem Torque (mm & Nm) Pressure Temperature Charts and low Data Available Optional eatures K Series T Ball Valves

3 Design eatures iresafe Standard Seal 2" - 6" Class " - 16" Class 600 All Sizes Class 2500 Weather Seal Stem Packing Braided Carbon Rope Primary Stem Seal Emergency Seat Seal Special sealants may be injected into fittings that are located on the adapter flanges to restore sealing integrity if seat sealing surface is damaged. A second internal check valve provides backup to the fitting. iresafe Standard Seal 8"- 12" Class Note: Details for lower stem configuration on page 8. Secondary Stem Seal Emergency Sealant Injection System The Sealant Injection System located on the bonnet can be utilized in case of emergencies, o-ring damage, or if stem leakage occurs. Double Sealed Envelope Connections Double o-rings or a combination of an o-ring and ire-safe gasket on body/bonnet connections to ensure positive sealing. This makes the Series T suitable for above or below ground service. Antistatic Device A spring between the bonnet and the ball permits electrical continuity. HeavyDutyBearings Heavy-duty PTE lined bearing eliminates the need of lubricating stem and trunnion journals, resulting in smooth and easy operation of valve. Upper stem and lower trunnion bearings balance the pressure load on the ball by reducing friction between ball and seat. Garfil epoxy bearing with PTE filler is standard in 2" through 6" in Class 600, 900 & 1500 and 8", 10" & 12" Class 600 & 900. A Garloc DU bearing with PTE liner is standard in 8", 10" & 12" Class 1500 and 2" through 12" Class K Series T Ball Valves 3

4 Technical Seating eatures Upstream Seat PL-Line Pressure D1=A1-A2 D1 A2 Double Block and Bleed PB=Body Cavity Pressure is Atmosphere A1 CLOSED BALL LOW LINE The double block and bleed condition is available in all seat design configurations. When the ball is in the closed position the body cavity pressure may be drained down to zero by opening the bleed valve and draining the fluid by removing the drain plug. Each seat works independently assuring tight shut off seal against ball on the upstream and downstream side. A1 D1 A2 Downstream Seat PD-Line Pressure Self Relieving Seat Design Upstream Seat: The difference in the area (D1) times the line pressure creates a piston effect which forces the seat against the ball surface. Also the springs behind the seat adds the force to the seat which keeps the seat in contact with the ball surface by providing the tight seal. Downstream Seat: When the body cavity pressure exceeds the spring pressure, automatic pressure relief will occur by relieving the body cavity pressure past the downstream seat. This eliminates the need for the body relief valve. PB=Body Cavity Pressure Is Atmosphere CLOSED BALL Open Vent (Bleed Valve) to Atmosphere for Seat sealing confirmation Availability & Maximum Pressure Ratings, ANSI B16.34 & API 6D API 6A Class/End Size (in.) Connection 2 P 3 RP 3 P 4 RP 4 P 6 RP 6 P 2000RTJ X X X X X X X 3000RTJ X X X X X X 5000RTJ X X X X X X X Consult factory for sizes not shown. LOW LINE Class/End Size (in.) Connection 2 P 3 RP 3 P 4 RP 4 P 6 RP 6 P 8 RP 8 P 10 RP 10 P 12 RP 12 P 14 P 16 RP 16 P 600R X X X X X X X X X X X X X X X X 600RTJ X X X X X X X X X X X X X X X X 900R X X X X X X X X X X X X X 900RTJ X X X X X X X X X X X X X 1500R X X X X X X X X X X X X X 1500RTJ X X X X X X X X X X X X X 2500R X X X X X X X X X X X X 2500RTJ X X X X X X X X X X X X 4 K Series T Ball Valves

5 K Series T Applicable Standards The following list contains the most important applicable standards for ball valves. K valves may be designed, manufactured and tested in accordance with other international standards on request. API-American Petroleum Institute Spec. 6A Spec. 6D Specification for wellhead and Christmas tree equipment. Specification for pipeline valves. Spec. RP6 Recommended practice for fire testing of valves. Spec. 6A Std. 598 Std. 605 Std. 607 Specification for fire testing of valves. Valve inspection and test. Large diameter carbon steel flanges. ire test for soft seated quarter-turn valves. ASME/ANSI-American National Standard B 16.5 B B B B 31.3 B 31.4 B 31.8 Steel pipe flanges and flanged fittings. ace-to-face and end-to-end dimensions of ferrous valves. Butt welding ends. Steel valves- langed and butt welding ends. Chemical plant and petroleum refinery piping Liquid petroleum transportation piping systems. Gas transmission and distribution piping systems. ASTM-American Society for Testing Materials British Standard BS 1503 BS 1504 BS 1560 BS 2080 Specification for steel forgings for pressure purposes. Specification for steel castings for pressure purposes. Steel pipe flanges and flanged fittings. ace-to-face, center-to-face, end-to-end, and center-to-end dimensions of flanged and butt-welding end steel valves for the petroleum, petrochemical and allied industries. British Standard-cont. BS 4504 BS 5146 BS 5351 BS 5750 BS 6755 langes and boltings for pipes, valves and fittings. Inspection and test of steel valves for the petroleum, petrochemical and allied industries. Steel ball valves for the petroleum, petrochemical and allied industries. Quality system. Testing of valves. EC-European Community CE Marked (P.E.D. 97/23/EC, Cat. 3) ISO-International Organization for Standardization ISO 9001:2000 Quality systems-model for quality assurance in design/development, production, installation and servicing. MSS-Manufacturers Standardization Society SP 6 SP 25 SP 44 SP 45 SP 55 SP 61 SP 72 Standard finishes for contact faces of pipe flanges and connecting- end flanges of valves and fittings. Standard marking system for valves, fittings, flanges and unions. Steel pipeline flanges. By-pass and drain connection standard. Quality standard for steel castingsvisual method. Hydrostatic testing of steel valves. Ball valves with flanged or butt-welding ends for general service. NACE-National Association of Corrosion Engineers MR0175 Sulfide stress cracking resistant metallic materials for oil field equipment. K Series T Ball Valves 5

6 Series T Valve Assembly Part Number Codes Body/Bolting Material Trim Material Seat Insert O-Ring / Backup Ring Material Note: All Class 2500 assemblies include PEEK Backup Rings. Specifications Options Actuation 1 CS (WCB) Body-Standard 2 SS (C8M) / CS (Xylan) 8 LOTEMP CS (LCC) / LTCS (SS tgs) 1 CS (1 mil ENP) Std. on ANSI Cl. 1500, 2500 & 6A* 2 316SS 3 410SS or CA-15M 6 CS (3 mil ENP) Std. on ANSI Cl. 600 & 900* 7 LTCS (3 mil ENP) (LT Ball/Stem, CS Seats & SS tgs) 8 LTCS (1 mil ENP) (LT Ball/Stem, CS Seats & SS tgs) 5 PEEK 9 Devlon V* 2 Viton A 4 EPDM / PEEK 5 Aflas / PEEK 8 Low Temp Buna N A James Walker Viton Elast-O-Lion 985 (JW) G HNBR* 4 NACE Cl. III Bolting / iresafe-standard on ANSI Cl. 1500, 2500 & 6A valves 6 NACE Cl. II Bolting / iresafe-standard on ANSI Cl. 600 & 900 valves 9 Standard 1 Handle 3 Gear Operator 4 Handle w/locking Device Process Codes (Last two digits used ONLY when Process Codes are required.) E 316SS (C8M) / 660SS H CA-15M / 660SS A CS w/drain B SS w/drain C 410SS w/drain D CS (3 mil) w/drain E LTCS (3 mil) w/drain LTCS w/drain 6 Gear Operator w/locking Device 9 Bare Stem A or Actuation Assembly Base Number 0XXXX - X X X X X X X XX Asterisk (*) in lieu of dash (-) in Assembly Part Number indicates customer requires soource inspection. (i.e. XXXX*XXXXXX) Assembly Base Numbers, R Viton is a registered trademark of DuPont Dow Elastomers. Teflon is a registered trademark of DuPont. Aflas is a registered trademark of Asahi Glass. Devlon is a registered trademark of Devol Engineering, Ltd. James Walker and Elast-O-Lion are registered trademarks of James Walker. PEEK is a trademark of Victrex Plc. *STANDARD TRIM CONIGURATION Class Size (in.) 2 P 3 RP 3 P 4 RP 4 P 6 RP 6 P 8 RP 8 P 10 RP 10 P 12 RP 12 P 14 P 16 RP 16 P 600R R R R Assembly Base Numbers, RTJ Class Size (in.) 2 P 3 RP 3 P 4 RP 4 P 6 RP 6 P 8 RP 8 P 10 RP 10 P 12 RP 12 P 14 P 16 RP 16 P 600RTJ RTJ RTJ RTJ Assembly Base Numbers, API Class Size (in.) 2 P 3 RP 3 P 4 RP 4 P 6 RP 6 P K Series T Ball Valves

7 Series TW Valve Assembly Part Number Codes End Connection Weld End Wall Thickness NACE Conformance Body/Bolting Material Trim Seat Insert/S Seal Material Actuation 3 WE x WE 4 R x WE 5 RTJ x WE XX See Weld Chart NACE II Cl. II Bolting N A216 WCB (CS) B7M* P SS / B7M (Xylan) S A352 LCC / L7M T SS / 660SS 2 316SS 6 CS (3 mil ENP)* 7 LCC (3 mil ENP) C PEEK / S E Devlon / S* 2 Viton A 4 EPDM 5 Aflas 8 Low Temp Buna N 1 Handle 3 Gear Operator 4 Handle w/locking Device B 316SS w/drain D CS (3 mil ENP) w/drain A James Walker Viton Elast-O-Lion 985 G HNBR* 6 Gear Operator w/locking Device 9 Bare Stem A or Actuator Process Codes (Last two digits used ONLY when Process Codes are required.) Assembly Base Number XXXX - X X X X X X X XX Asterisk (*) in lieu of dash (-) in Assembly Part Number indicates customer requires soource inspection. (i.e. XXXX*XXXXXX) Assembly Base Numbers Viton is a registered trademark of DuPont Dow Elastomers. Teflon is a registered trademark of DuPont. Aflas is a registered trademark of Asahi Glass. Devlon is a registered trademark of Devol Engineering, Ltd. James Walker and Elast-O-Lion are registered trademarks of James Walker. PEEK is a trademark of Victrex Plc. *STANDARD TRIM CONIGURATION Class Size (in.) 2 P 3 RP 3 P 4 RP 4 P 6 RP 6 P 8 RP 8 P 10 RP 10 P 12 RP 12 P 14 P 16 RP 16 P Note: Consult factory for sizes and psi classes not shown. K Series TW Butt Weld End Schedule Code Pipe Nominal Pipe Size (in.)/k Schedule Code Description 2 Code 3 Code 4 Code 6 Code 8 Code 10 Code 12 Code 14 Code 16 Code Outside Dia. (In.) (STD) Standard Schedule Schedule XS Schedule Schedule Schedule XXS Consult factory for other wall thicknesses. K Series T Ball Valves 7

8 Series T & TW Component Parts 8"P only and Larger Sizes Only /2" thru 8"RP only Note: Weld End configuration not shown (Series TW) Lower Stem Detail 8" thru 12" Trunnion Cover O-Ring available for 1 1 /2" thru 6" bore only "P and Larger Sizes Only Primary Seal Secondary Seal Stem Packing Parts List Index No. Description 1 Body 2 Bonnet 3 * Ball/Stem 4 Trunnion Bearing 5* Stem Seal 6 * Stem Back-up Ring 7 * Seat 8* Seat O-Ring 9* Seat Back-up Ring Index No. Description 10 * Seat Sub Seal/ Braided Carbon Rope 11 * Wave Spring 12 Bonnet Cap Screw 13 Stop Screw 14 * Bonnet Gasket/Seal 15* Stem Bearing 16 Stop Plate 17* Retainer Index No. Description 18 Retract. Port Screw 19 * Retract. Port Seal 20 Injection itting 21 Bleed Valve 22 Bonnet Align. Pin 23 Grounding Plunger 24 Grounding Spring 29 Key 30 Thrust Plate Index No. Description 31 Thrust Adjust.Screw 32 Jam Nut 33 Thrust Plate Bolt 34 Lock washer 35 * Bonnet Primary Seal 36 * Stem Packing/ Braided Carbon Rope 40 Internal Ball Check 41* Trunnion Cover O-Ring * Recommended spare parts where applicable Not used in 8"P and larger assemblies. 8" and larger use double stem seals. 8 K Series T Ball Valves

9 K Series T Dimensional Data (in./mm), API 6D & ANSI B16.34, Class 600 G H E U AA C Dimensional Data (in./mm) 2"P-16"P B A V No. of Holes W Hole Dia. X Bolt Circle D ANSI B16.5 langes Dimension (in.) Size Wt. (lbs.) B C Ring (in.) Valve w/ w/gear A R RTJ R RTJ D E Top of CL of G H U V W X Y Z AA BB Groove 2 x / / /8 5 3 / / /2 6 1 / / / /8 8 3/ /4 4 7 /8 7 3 /16 R-23 3 x / / / /4 6 1 / / / /8 8 7/8 6 5 / /4 4 7 /8 7 3 /16 R-31 3 x / / / /4 7 5 / / / / /2 8 7/8 6 5 / /2 5 3 /4 7 1 /2 R-31 4 x / /8 8 1 /2 8 9 / /4 7 5 / / / / / / /2 5 3 /4 7 1 /2 R-37 4 x / /8 8 1 /2 8 9 / /4 9 1 / / / / / / /2 6 1 /2 9 1 /4 R-37 6 x / / / / / / / / / / /2 6 1 /2 9 1 /4 R-45 6 x / / / / / / / / / /2 8 5 / /16 R-45 8 x / / / / / / / / / / /2 8 5 / /16 R-49 8 x / / / / /8 3 1 / / / / / / /8 R x / / / / /8 3 1 / / / / / /8 R x / / / / / / / / / / /16 R x / / / / / / / / / / / /16 R x / / / / /2 4 1 / / / / / / /8 R-57 14x13 1 / / / / / / / /4 4 1 / / / / / /8 R x13 1 / / / / / / /4 4 1 / / / / / /8 R x15 1 / / / / / / /8 4 1 / / / / / / /8 R-65 Dimension (mm) Size Wt. (kg) B C Ring (in.) Valve w/ w/gear A R RTJ R RTJ D E Top of CL of G H U V W X Y Z AA BB Groove 2 x R-23 3 x R-31 3 x R-31 4 x R-37 4 x R-37 6 x R-45 6 x R-45 8 x R-49 8 x R x R x R x R x R-57 14x13 1 / R x13 1 / R-65 16x15 1 / R-65 Z Y BB K Series T Ball Valves 9

10 K Series T Dimensional Data (in./mm), API 6D & ANSI B16.34, Class 900 G H E U AA C Dimensional Data (in./mm) 2"P-12"P B A V No. of Holes W Hole Dia. X Bolt Circle D ANSI B16.5 langes Dimension (in.) Size Wt. (lbs.) B C Ring (in.) Valve w/ w/gear A R RTJ R RTJ D E Top of CL of G H U V W X Y Z AA BB Groove 2 x / / /8 7 1 /4 7 5 / /2 6 1 / / / / / / /16 R-24 3 x / /8 7 1 /2 7 9 / /2 6 1 / / / / / / /16 R-31 3 x / /8 7 1 /2 7 9 / /2 7 5 / / / / / / / / /2 R-31 4 x / / / /2 7 5 / / / / / /4 9 1 / / / /2 R-37 4 x / / / /2 9 1 / / / / / /4 9 1 / /2 6 3 /4 9 1 /4 R-37 6 x / / / / / / / / / / /2 6 3 /4 9 1 /4 R-45 6 x / / / / / / / / / /2 8 5 / /16 R-45 8 x / / / / / / / / / / / /2 8 5 / /16 R-49 8 x / / / / / /8 3 1 / / / / / / /8 R x / / / / / /8 3 1 / / / / / / /8 R x / / / / / / / / / / / / /8 R x / / / / / / / / / /8 R x / / / /2 4 1 / / / / / /8 R-57 Dimension (mm) Size Wt. (kg) B C Ring (in.) Valve w/ w/gear A R RTJ R RTJ D E Top of CL of G H U V W X Y Z AA BB Groove 2 x R-24 3 x R-31 3 x R-31 4 x R-37 4 x R-37 6 x R-45 6 x R-45 8 x R-49 8 x R x R x R x R x R-57 Z Y BB 10 K Series T Ball Valves

11 K Series T Dimensional Data (in./mm), API 6D & ANSI B16.34, Class 1500 G H E U AA C Dimensional Data (in./mm) 2"P-12"P B A V No. of Holes W Hole Dia. X Bolt Circle D ANSI B16.5 langes Dimension (in.) Size Wt. (lbs.) B C Ring (in.) Valve w/ w/gear A R RTJ R RTJ D E Top of CL of G H U V W X Y Z AA BB Groove 2 x / / /8 7 1 /4 7 5 / /2 6 1 / / / / / /4 5 1 /8 7 3 /16 R-24 3 x / / /8 9 1 /4 9 5 / /2 6 1 / / / / / /4 5 1 /8 7 3 /16 R-35 3 x / / /8 9 1 /4 9 5 / / / / / /8 6 7 / / /2 6 1 /8 7 1 /2 R-35 4 x / / / / / / / / / /8 6 7 / /8 9 1 / /2 6 1 /8 7 1 /2 R-39 4 x / / / / / / / /2 9 5 / / / /8 9 1 / / /4 R-39 6 x / / / / / /2 9 5 / / / / / / /4 R-46 6 x / / / / / / / / / /8 8 3 / /8 R-46 8 x / / / / / / / / / / /8 8 3 / /8 R-50 8 x / / / / / / /8 3 3 / / / / / / /4 R x / / / / / /8 3 3 / / / / /4 R x / / / / / / / / / / /8 R x / / / / / / / / / / / / / / /8 R x / / / / / / / /2 4 1 / / / / / / /8 R-58 Dimension (mm) Size Wt. (kg) B C Ring (in.) Valve w/ w/gear A R RTJ R RTJ D E Top of CL of G H U V W X Y Z AA BB Groove 2 x R-24 3 x R-35 3 x R-35 4 x R-39 4 x R-39 6 x R-46 6 x R-46 8 x R-50 8 x R x R x R x R x R-58 Z Y BB K Series T Ball Valves 11

12 K Series T Dimensional Data (in./mm), API 6D & ANSI B16.34, Class 2500 G H E U AA C Dimensional Data (in./mm) 2"P-12"P B A V No. of Holes W Hole Dia. X Bolt Circle D ANSI B16.5 langes Dimension (in.) Size Wt. (lbs.) B C Ring (in.) Valve w/ w/gear A R RTJ R RTJ D E Top of CL of G H U V W X Y Z AA BB Groove 2 x / / /8 8 7 / / /4 7 1 / / / / /8 6 3 / /4 4 1 /2 7 1 /2 R-26 3 x / / / / / / /8 7 3 / / /2 5 9 / /8 R-32 4 x / / / / / / / /8 7 3 / / / /2 5 9 / /8 R-38 4 x / / / / / / / / / / / / / /8 R-38 6 x / / / / / / / / / / / /8 R-47 6 x / / / / / / / / / /8 8 7 / /8 R-47 8 x / / / / / / / / / / / / /8 8 7 / /8 R-51 8 x / / / / / / / / / / / / / / /8 R x / / / / / / / / / / / / /8 R-55 10x / / / / / /8 4 1 / / / / / / /8 R-55 12x / / / / /8 4 1 / / / / / / /8 R x / / / / / / / / / / / /8 R-60 Z Y BB Dimension (mm) Size Wt. (kg) B C Ring (in.) Valve w/ w/gear A R RTJ R RTJ D E Top of CL of G H U V W X Y Z AA BB Groove 2 x R-26 3 x R-32 4 x R-38 4 x R-38 6x R-47 6x R-47 8x R-51 8x R-51 10x R x R-55 12x R x R K Series T Ball Valves

13 K Series T Dimensional Data (in.), API 6A, 2000, 3000 & 5000 RTJ G H E U AA C B Dimensional Data (in.), Class 2000 RTJ, 2"P-6"P A V No. of Holes W Hole Dia. X Bolt Circle D ANSI B16.5 langes Dimension (in.) Size Wt. (lbs.) Ring (in.) Valve w/ w/gear A B C D E Top of CL of G H U V W X Y Z AA BB Groove 2 1 /16 x2 1 / / / / /2 6 1 / / / /8 8 3/ /4 4 7 /8 7 3 /16 R /8x2 1 / / /8 7 1 / /4 6 1 / / / /8 8 7/8 6 5 / /4 4 7 /8 7 3 /16 R /8 x3 1 / / /8 7 1 / /4 7 5 / / / / /2 8 7/8 6 5 / /2 5 3 /4 7 1 /2 R /16 x3 1 / / /8 8 9 / /4 7 5 / / / / / / /2 5 3 /4 7 1 /2 R /16 x4 1 / / /8 8 9 / /4 9 1 / / / / / / /2 6 1 /2 9 1 /4 R /16 x4 1 / / / / / / / / / / / /2 6 1 /2 9 1 /4 R /16 x / / / / / / / / / /2 8 5 / /16 R-45 Z Y BB Dimensional Data (in.), Class 3000 RTJ, 2"P-6"P Dimension (in.) Size Wt. (lbs.) Ring (in.) Valve w/ w/gear A B C D E Top of CL of G H U V W X Y Z AA BB Groove 2 1 /16 x2 1 / / /8 7 5 / /2 6 1 / / / / / / /16 R /8x2 1 / / /8 7 9 / /2 6 1 / / / / / / /16 R /8 x3 1 / / /8 7 9 / /2 7 5 / / / / / / / / /2 R /16 x3 1 / / /8 9 1 / /2 7 5 / / / / / /4 9 1 / / / /2 R /16 x4 1 / / /8 9 1 / /2 9 1 / / / / / /4 9 1 / /2 6 3 /4 9 1 /4 R /16 x / / / / / / / / / /2 8 5 / /16 R-45 Dimensional Data (in.), Class 5000 RTJ, 2"P-6"P Dimension (in.) Size Wt. (lbs.) Ring (in.) Valve w/ w/gear A B C D E Top of CL of G H U V W X Y Z AA BB Groove 2 1 /16 x2 1 / / /8 7 5 / /2 6 1 / / / / / /4 4 3 /8 7 3 /16 R /8x2 1 / / /8 9 5 / /2 6 1 / / / / / /4 4 3 /8 7 3 /16 R /8 x3 1 / / /8 9 5 / / / / / /8 6 7 / / /2 5 3 /8 7 1 /2 R /16 x3 1 / / / / / / / / /8 6 7 / /8 9 1 / /2 5 3 /8 7 1 /2 R /16 x4 1 / / / / / / /2 9 5 / / / /8 9 1 / /2 6 1 /4 9 1 /4 R /16 x4 1 / / / / /2 9 5 / / / / / /2 6 1 /4 9 1 /4 R /16 x / / / / / / / /2 7 5 / /16 R-46 K Series T Ball Valves 13

14 K Series T Dimensional Data (mm), API 6A, 2000, 3000 & 5000 RTJ G H E U AA C B Dimensional Data (mm), Class 2000 RTJ, 2"P-6"P A V No. of Holes W Hole Dia. X Bolt Circle D ANSI B16.5 langes Dimension (mm) Size Wt. (kg) Ring (in.) Valve w/ w/gear A B C D E Top of CL of G H U V W X Y Z AA BB Groove 2 1 /16 x2 1 / R /8x2 1 / R /8 x3 1 / R /16 x3 1 / R /16 x4 1 / R /16 x4 1 / R /16 x R-45 Z Y BB Dimensional Data (mm), Class 3000 RTJ, 2"P-6"P Dimension (mm) Size Wt. (kg) Ring (in.) Valve w/ w/gear A B C D E Top of CL of G H U V W X Y Z AA BB Groove 2 1 /16 x2 1 / R /8x2 1 / R /8 x3 1 / R /16 x3 1 / R /16 x4 1 / R /16 x R-45 Dimensional Data (mm), Class 5000 RTJ, 2"P-6"P Dimension (mm) Size Wt. (kg) Ring (in.) Valve w/ w/gear A B C D E Top of CL of G H U V W X Y Z AA BB Groove 2 1 /16 x2 1 / R /8x2 1 / R /8 x3 1 / R /16 x3 1 / R /16 x4 1 / R /16 x4 1 / R /16 x R K Series T Ball Valves

15 K Series TW Dimensional Data (in./mm), API 6D & ANSI B16.34, Class 600 G H E U D A BB AA Z C B V No. of Holes W Hole Dia. X Bolt Circle ANSI B16.5 langes Y Dimensional Data (in./mm) 2"P-16"P Dimension (in.) Size Wt. (lbs.) B C D V W X Ring (in.) WE x langed add for add for WE xwe RTJ WE xwe RTJ langed E Top of CL of G H U langed langed langed Y Z AA BB Groove WE x WE Handle GearOp RxWE x WE RxWE x WE x WE Handle H/Whl. x WE x WE x WE RTJxWE 2 x / / / / /2 6 1 / / / /8 8 3/ /4 4 7 /8 7 3 /16 R-23 3 x / / /4 6 1 / / / /8 8 7/8 6 5 / /4 4 7 /8 7 3 /16 R-31 3 x / / /4 7 5 / / / / /2 8 7/8 6 5 / /2 5 3 /4 7 1 /2 R-31 4 x / / / /4 7 5 / / / / / / /2 5 3 /4 7 1 /2 R-37 4 x / / / /4 9 1 / / / / / / /2 6 1 /2 9 1 /4 R-37 6 x / / / / / / / / / /2 6 1 /2 9 1 /4 R-45 6 x / / / / / / / / / /2 8 5 / /16 R-45 8 x / / / / / / / / / / /2 8 5 / /16 R-49 8 x / / / / /8 3 1 / / / / / / /8 R x / / / / /8 3 1 / / / / / /8 R x / / / / / / / / / / /16 R x / / / / / / / / / / / /16 R x / / / / /2 4 1 / / / / / / /8 R-57 14x13 9 / / / / / / /4 4 1 / / / / / /8 R x13 9 / / / / / /4 4 1 / / / / / /8 R x15 1 / / / / / /8 4 1 / / / / / / /8 R-65 Note: Dimension A per pipe wall schedule on page 7. Dimension (mm) Size Wt. (kg) B C D V W X Ring (in.) WE x langed add for add for WE xwe RTJ WE xwe RTJ langed E Top of CL of G H U langed langed langed Y Z AA BB Groove WE x WE Handle GearOp RxWE x WE RxWE x WE x WE Handle H/Whl. x WE x WE x WE RTJxWE 2 x R-23 3 x R-31 3 x R-31 4 x R-37 4 x R-37 6 x R-45 6 x R-45 8 x R-49 8 x R x R x R x R x R-57 14x13 9 / R x13 9 / R x15 1 / R-65 Note: Dimension A per pipe wall schedule on page 7. K Series T Ball Valves 15

16 Topworks & Stem Torque (in.) CLOSED OPEN K J D K DD J D K Q R CC D H latted Stem 2"P-8"RP Round Stem Square Key 8"P-16"P P Hole Depth S Threaded Hole T No. of Holes R & Q typical Valve API # J D P S T Max.Stem Break Torque Expression Size Class/ H Stem K Hole Q R Threaded No. of CC D DD* ShearTorq. Torque See Notes 1, 2, 3 (in.) Pressure Dia. Depth Hole Holes t.-lbs. In.-Lbs. Below Chart 2 6D / / /.744 1/ /16BC 5 / on CL 3 3 / D / / /.744 1/ /16BC 5 / on CL 3 1 / D / / /.744 1/ /16BC 5 / on CL 3 1 / D / / /.868 1/ /16BC 5 / on CL 3 1 / * P A / / /.744 1/ /16BC 5 / on CL 3 3 / A / / /.744 1/ /16BC 5 / on CL 3 1 / A / / /.744 1/ /16BC 5 / on CL 3 1 / D / / /.994 7/8 3 3 /8 1 3 /4 3/ / D / / /.994 7/8 3 3 /8 1 3 /4 3/ / D / / /.994 7/8 3 3 /8 1 3 /4 3/ / D / / / /8 3 3 /8 1 3 /4 3/ / * P A / / /.994 7/8 3 3 /8 1 3 /4 3/ / A / / /.994 7/8 3 3 /8 1 3 /4 3/ / A / / /.994 7/8 3 3 /8 1 3 /4 3/ / D / / / /8 3 3 /8 2 3/ / D / / / /8 3 3 /8 2 3/ / D / / / /4 4 1 /2 2 3 /8 1/ / D / / /2 sq. 3/4 4 1 /2 2 3 /8 1/ / , * P A / / / /8 3 3 /8 2 3/ / A / / / /8 3 3 /8 2 3/ / A / / / /4 4 1 /2 2 3 /8 1/ / , D / / / /8 2 7 /8 1/ / D / / / /8 2 7 /8 1/ / , D / / /4 sq. 1 1 / /2 5/ / / , D / / /4 sq. 1 1 / /2 5/ / / ,712 21, * P A / / / /8 2 7 /8 1/ / , A / / / /8 2 7 /8 1/ / , A / / /4 sq. 1 1 / /2 5/ / / ,974 18, D / / /4 sq. 1 1 / /2 5/ / / , D / / /4 sq. 1 1 / /2 5/ / / , D / / /4 sq. 1 1 / /2 5/ / / ,941 39, * P D / / /8 sq. 1 1 / /2 3/ / / ,252 60, D / / /8 sq. 1 1 / /2 3/ / / ,317 31, D / / /8 sq. 1 1 / /2 3/ / / ,317 42, D / / /8 sq. 1 1 / /2 3/ / / ,476 65, * P D / / sq. 1 1 / / / / , , D / / sq. 1 1 / /2 3/ / / ,186 48, D / / sq. 1 1 / / / / ,186 67, D / / sq. 1 1 / / / / , , * P + 11, D / / sq. 1 1 / / / / , , D / / sq. 1 1 /2 9 1 /2 3 7/ / ,186 63, * P + 12, D / / sq. 1 1 /2 9 1 /2 3 7/ / ,186 77, * P + 14,400 Note: (1) Torque at maximum differential pressure are tabulated. (2) Torques expressions are suggested for other differential pressure. (3) Differential pressure P in torque expressions is in PSI. * DD dimension is applicable to keyed stem only. Pressure ratings according to API 6D: Class 600 P = 1480 Class 900 P = 2220 Class 1500 P = 3705 Class 2500 P = 6170 Top of stem to top of mounting pad Pressure ratings according to API 6A: API 2000 P = 2000 API 3000 P = 3000 API 5000 P = K Series T Ball Valves

17 Topworks(mm)&Stem Torque(Nm) CLOSED OPEN K J D K DD J D K Q R CC D H latted Stem 2"P-8"RP Round Stem Square Key 8"P-16"P P Hole Depth S Threaded Hole T No. of Holes R & Q typical Top of stem to top of mounting pad Valve API # J D P S T Max.Stem Break Torque Expression Size Class/ H Stem K Hole Q R Threaded No. of CC D DD* ShearTorq. Torque See Notes 1, 2, 3 (in.) Pressure Dia. Depth Hole Holes Nm Nm Below Chart 2 6D / / BC 5 / on CL D / / BC 5 / on CL D / / BC 5 / on CL D / / BC 5 / on CL * P A / / BC 5 / on CL A / / BC 5 / on CL A / / BC 5 / on CL D / / / D / / / D / / / D / / / * P A / / / A / / / A / / / D / / / D / / / D / / / D / / / * P A / / / A / / / A / / / D / / / D / / / D / sq / / D / sq / / , * P A / / / , A / / / , A / sq / / , D / sq / / , D / sq / / , D / sq / / , * P D / sq / / , D / sq / / , D / sq / / , D / sq / / , *P D / sq / / ,941 11, D / sq / / , D / sq / / , D / sq / / ,377 11, *P D / sq / / ,941 18, D / sq / / , * P D / sq / / , * P Note: (1) Torque at maximum differential pressure are tabulated. Pressure ratings according to API 6D: Pressure ratings according to API 6A: (2) Torques expressions are suggested for other differential pressure. Class 600 P = API 2000 P = (3) Differential pressure P in torque expressions is in Mpa. Class 900 P = API 3000 P = * DD dimension is applicable to keyed stem only. Class 1500 P = API 5000 P = Class 2500 P = K Series T Ball Valves 17

TRUNNION BALL VALVES. TBV 7.10

TRUNNION BALL VALVES.     TBV 7.10 TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in

More information

KF Series FA Ball Valves

KF Series FA Ball Valves KF Series FA all Valves Superior Fluid ontrol Products for the Petrochemical and Industrial Markets Series FA all Valves This high quality two-piece split body trunnion mounted ball valve conforms to API

More information

International Standard Valve, Inc. Trunnion Mounted Ball Valve

International Standard Valve, Inc. Trunnion Mounted Ball Valve International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API

More information

Engineered Valves For Pipeline Service Application

Engineered Valves For Pipeline Service Application Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru

More information

Fully Welded Ball Valves

Fully Welded Ball Valves Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure

More information

International Standard Valve, Inc. Trunnion Mounted Ball Valve

International Standard Valve, Inc. Trunnion Mounted Ball Valve International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire

More information

Trunnion Ball Valves

Trunnion Ball Valves Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure

More information

Trunnion Ball Valves

Trunnion Ball Valves Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high

More information

TM SERIES Engineered Valves For Pipeline Service Application

TM SERIES Engineered Valves For Pipeline Service Application Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt

More information

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes

More information

PBV s Engineering Excellence At Work

PBV s Engineering Excellence At Work PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves

More information

STANDARDS and SPECIFICATIONS

STANDARDS and SPECIFICATIONS ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)

More information

ViNtrol Series VT2 and VT3 Trunnion Mounted Ball Valves. Your Valve Solution Specialist

ViNtrol Series VT2 and VT3 Trunnion Mounted Ball Valves. Your Valve Solution Specialist ViNtrol Series VT2 and VT3 Trunnion Mounted Ball Valves Your Valve Solution Specialist Experience the ViNtrol Difference It All Starts With Our State-of-the-Art ViNtrol Facility and Extensive Product Offering

More information

Forged 3 Piece Trunnion Mounted Ball Valves Series PL

Forged 3 Piece Trunnion Mounted Ball Valves Series PL Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

WKM 320F. Flanged floating ball valves

WKM 320F. Flanged floating ball valves WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index

One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page

More information

Ball Valves. Quality Valves at Low Cost

Ball Valves. Quality Valves at Low Cost Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct

More information

RAM Company USA Products Line

RAM Company USA Products Line RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON

More information

KF Valves Check Valves

KF Valves Check Valves Check Valves Excellence In Flow Control High Performance By Design Applicable Standards KF check valves conform to ANSI, API and NACE specifications to meet your application requirements. ANSI- American

More information

Forged 3 Piece Trunnion Mounted Ball Valves Series MS

Forged 3 Piece Trunnion Mounted Ball Valves Series MS Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional

More information

CAST TRUNNION BALL VALVE

CAST TRUNNION BALL VALVE CAST TRUNNION BALL VALVE ATLAS SERIES BEHIND THE NAME With a renewed focus on product leadership through innovation and quality, C&C is your world class provider of flow solutions. 2 Atlas, a Titan known

More information

SUZHOU LETE VALVE CO.,LTD.

SUZHOU LETE VALVE CO.,LTD. SUZHOU LETE VALVE CO.,LTD. Add: Dongtaihu Road Puzhuang Town,Wuzhong District,Suzhou 155,China Tel: 5151 Fax: 515599 Mail: nihp@lete.szbnet.com SUZHOU LETE VALVE CO.,LTD. TABLE OF CONTENTS Introduction...1

More information

Bolted Three Piece Forged Steel TRUNNION BALL VALVE

Bolted Three Piece Forged Steel TRUNNION BALL VALVE Bolted Three Piece Forged Steel TRUNNION BALL VALVE TABLE OF CONTENTS Manufacturing range Key features & benefi ts Cross sectional drawings Sizes & dimensions Top works dimensions Actuation capabilities

More information

VELAN TRUNNION-MOUNTED

VELAN TRUNNION-MOUNTED VELAN TRUNNION-MOUNTED Velan s standard trunnion-mounted ball valves offer increased value by incorporating advanced design features. TRUNNION-MOUNTED BALL The ball is fixed and the seat rings are floating,

More information

SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES

SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates

More information

PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured

PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,

More information

FORGED TRUNNION BALL VALVE

FORGED TRUNNION BALL VALVE FORGED TRUNNION BALL VALVE TRIDENT SERIES BEHIND THE NAME With a renewed focus on product leadership through innovation and quality, C&C is your world class provider of flow solutions. Similar to how Poseidon

More information

Three Piece Forged Trunnion Mounted Ball Valve

Three Piece Forged Trunnion Mounted Ball Valve International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded

More information

GWC Italia. Proven technology for individual valve solutions worldwide. flanged floating ball valves FBV-1002

GWC Italia. Proven technology for individual valve solutions worldwide. flanged floating ball valves FBV-1002 GWC Italia Proven technology for individual valve solutions worldwide flanged floating ball valves FBV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network

More information

International Standard Valve, Inc. Slab and Expanding Gate Valves

International Standard Valve, Inc. Slab and Expanding Gate Valves International Standard Valve, Inc. TM ISV Series GTDS & GTDE Slab and Expanding Gate Valves 2 through 36 ASME Class 150-2500 Top Entry Bolted Body Flanged & Weld Ends API 6D Fire Safe Design NACE is a

More information

D I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM

D I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to

More information

RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600

RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600 The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and

More information

BALL valve FLOATING BALL VALVE

BALL valve FLOATING BALL VALVE BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range

More information

EXPG SBG API 6D EXPANDING/ SLAB GATE VALVES SERIES DEPEND ON US. WE CAN HANDLE THE PRESSURE.

EXPG SBG API 6D EXPANDING/ SLAB GATE VALVES SERIES DEPEND ON US. WE CAN HANDLE THE PRESSURE. API 6D Expanding/ Slab Gate Valves ANSI 150-300-600-900-1500 SERIES 2-36 EXPG SBG > Control > Flow Quality > lit API 6D EXPANDING/ SLAB GATE VALVES Providing Hundreds of Products. Supporting Thousands

More information

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through

More information

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6 + CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar

More information

Introduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range...

Introduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range... CATALOGUE CONTENTS Introduction... 3 Certifications...4-5 References Standards... 6 Ball Valves... 7 Trunnion Mounted Ball Vaves... 8 Product Range... 9 Available Design Options... 10 Quality & Testing...

More information

GWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002

GWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002 GWC Italia Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w

More information

THROUGH CONDUIT VALVES TECHNICAL CATALOGUE

THROUGH CONDUIT VALVES TECHNICAL CATALOGUE SITINDUSTRIE VALVO VALVES THROUGH CONDUIT VALVES Ed. 01/DIC-2004 SITINDUSTRIE reserves the right to change, without notice, 1/14 SITINDUSTRIE TRIE VALVE DIVISION We are pleased to introduce you to the

More information

The Company LCM ITALIA, which is part of CHERO group, was established

The Company LCM ITALIA, which is part of CHERO group, was established Contents oreword Applicds Quality Assurance and Certification Technical Features of Floating Ball Valve Assembly Drawing of Floating Ball Valve Standard Materials selection of Floating Ball Valve Production

More information

GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002

GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 GWC Italia Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide

More information

TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type

TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type TRUNNION MOUNTED BALL VALVES API 6D & API 6A Side_Entry Ball Valve SE type Stem Stem Seals Body / Closure Gasket Ball Seat Seat Seal Side_Entry Ball Valve SE type TECHNICAL DESCRIPTION Description: ON/OFF

More information

Pig Valves. Complete Solutions for Industrial Valves NEWAY VALVE

Pig Valves. Complete Solutions for Industrial Valves NEWAY VALVE Pig Valves Pig Valves Complete Solutions for Industrial Valves NEWAY VALVE Cat.no.:E-PV-2005 Introduction 1 Quality Commitment 2 How to Order 3 4 ~ 5 Product Introduction Material Specifications Complete

More information

TRUNNION MOUNTED BALL VALVES

TRUNNION MOUNTED BALL VALVES TRUNNION MOUNTED BALL VALVES COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual production

More information

GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002

GWC Italia. Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 GWC Italia Proven technology for individual valve solutions worldwide API 6D THROUGH CONDUIT SLAB & PARALLEL EXPANDING GATE VALVES PGV-1002 2 GWC ITALIA Proven technology for individual valve solutions

More information

Series MANIFOLD SYSTEMS BALL VALVES CHECK VALVES 3-WAY BALL VALVES THROTTLE BALL VALVES POPPET DIVERTER VALVES MANIFOLD COMPONENTS

Series MANIFOLD SYSTEMS BALL VALVES CHECK VALVES 3-WAY BALL VALVES THROTTLE BALL VALVES POPPET DIVERTER VALVES MANIFOLD COMPONENTS O P T I M U M F L O W T E C H N O L O G Y B Y P I P E R Series PB SMARTER MANIFOLD SYSTEMS BALL VALVES CHECK VALVES 3-WAY BALL VALVES THROTTLE BALL VALVES POPPET DIVERTER VALVES MANIFOLD COMPONENTS Series

More information

VALVES & MEASUREMENT. TEXSTEAM Super G Plug Valves TEXSTEAM

VALVES & MEASUREMENT. TEXSTEAM Super G Plug Valves TEXSTEAM TEXSTEAM Super G Plug Valves TEXSTEAM 2 TEXSTEAM TABLE OF CONTENTS Introduction... 4 Design Standards... 5 Parts List... 6 Accessories and Repair Kits... 7 Reduced Port Dimensions and Weights... 8 Full

More information

Series VF Floating Ball Valve Installation, Operation & Maintenance XXXX - X X X X X X XX XX. Base Part Numbers CONTENTS. Trim Option Suffix Code

Series VF Floating Ball Valve Installation, Operation & Maintenance XXXX - X X X X X X XX XX. Base Part Numbers CONTENTS. Trim Option Suffix Code Series VF Floating Ball Valve Installation, Operation & Maintenance CONTENTS I. Introduction Page 1 Base Part Numbers & Suffix Code Page 1 II. Transportation & Storage Page 1 III. Installation Page 1 IV.

More information

TECHNICAL BULLETIN. Valbart TM Through conduit slab gate valve. Experience in Motion FCD VBENTB A4 - (9/16)

TECHNICAL BULLETIN. Valbart TM Through conduit slab gate valve. Experience in Motion FCD VBENTB A4 - (9/16) Valbart TM Through conduit slab gate valve TECHNICAL BULLETIN FCD VBENTB1013-01-A4 - (9/16) Experience in Motion Valbart Through Conduit Slab Gate Valve The Valbart TCSGV is a fabricated body through conduit

More information

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:

More information

Ball Valves SMART IN FLOW CONTROL

Ball Valves SMART IN FLOW CONTROL all Valves SMART IN FLOW CONTROL COMPANY OVERVIEW Ringo Válvulas (RV) is located in the industrial city of Zaragoza, Spain. Since its establishment RV has designed and manufactured its own cast and forged

More information

GWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003

GWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions

More information

Butterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)

Butterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Butterfly Valve Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Sizes: - 2 to 120 (50mm to 3000mm) Rating: - Class 150 & PN16 Wafer Type Lug Type Flanged End Information:- www.invacovalves.com

More information

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek

More information

Ball Valves. ASME Class 150 to mm mm (¼" - 8") ISO 17292/ API 6D

Ball Valves. ASME Class 150 to mm mm (¼ - 8) ISO 17292/ API 6D Ball Valves SM Class 150 to 2500 8 mm - 200 mm (¼" - 8") ISO 17292/ PI 6D L&T Valves Limited is a wholly owned subsidiary of Larsen & Toubro. Backed by a fifty-year track-record of excellence and world-leading

More information

Series A Floating Ball Valve Installation, Operation & Maintenance XXXX - X X X X X X X. Base Part Numbers. Trim Option Suffix Code

Series A Floating Ball Valve Installation, Operation & Maintenance XXXX - X X X X X X X. Base Part Numbers. Trim Option Suffix Code Series A Floating Ball Valve Installation, Operation & Maintenance Base Part Numbers RATING 1 FP 2 RP 2 FP 3 RP 3 FP 4 RP 4 FP 1000 1102 1103 1104 1106 1105 1107 1500 1151 1152 1153 1154 1156 1155 1157

More information

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.

More information

Series T2 2-Piece 8-12 Trunnion Ball Valve Installation, Operation & Maintenance XXXX - X X X X X X XX XX. Base Part Numbers. Trim Option Suffix Code

Series T2 2-Piece 8-12 Trunnion Ball Valve Installation, Operation & Maintenance XXXX - X X X X X X XX XX. Base Part Numbers. Trim Option Suffix Code Series T2 2-Piece 8-12 Trunnion Ball Valve Installation, Operation & Maintenance Base Part Numbers SIZE Cl. 150 Cl. 300 Cl.600 Cl.900 Cl.1500 8 FP 5112 5312 5612 5912 5712 10 RP 5113 5313 5613 5913 5713

More information

GWC Italia. Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002

GWC Italia. Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002 GWC Italia Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network

More information

MV1. Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer. Cert. No License No. 6D-0840

MV1. Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer. Cert. No License No. 6D-0840 MV1 Cert. No. 224939 License No. 6D-0840 0062 Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer INTRODUCTION MIR VALVE Sdn. Bhd. (MIR VALVE) was incorporated on 27 December, 2006, obtained

More information

5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel

5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Adjustable, live-loaded graphite packing API 98 inspection and testing

More information

Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)

Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661) 3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company

More information

KF Eagle Series 35 Check Valves

KF Eagle Series 35 Check Valves Check Valves Flanged End (RF and RTJ) Swing Style Integrally Cast Flange design. Standard trim includes 316 Stainless Steel Disc, Shaft and Bushings. Unique optional 316 Stainless Steel removable Seat

More information

Contents. Dimensions and weights

Contents. Dimensions and weights G4N Gate Valves Through-conduit, double block-and-bleed slab gate valves with fully protected seat faces for long-lasting, drop-tight shutoff in liquid pipelines Contents General information 3 Standard

More information

M A N I F O L D S Y S T E M S 3 - WAY B A L L VA LV E S O P T I M U M - F L O W T E C H N O L O G Y B Y P I P E R

M A N I F O L D S Y S T E M S 3 - WAY B A L L VA LV E S O P T I M U M - F L O W T E C H N O L O G Y B Y P I P E R O P T I M U M - F L O W T E C H N O L O G Y B Y P I P E R S M A R T E R M A N I F O L D S Y S T E M S B A L L VA LV E S C H E C K VA LV E S 3 - WAY B A L L VA LV E S T H R O T T L E B A L L VA LV E S P

More information

Design & Technology in Valves

Design & Technology in Valves Design & Technology in Valves Ibor has been involved in many large international projects with the world s leading EPC Company overview Ibor manufacture Ball valves, Butterfly valves, Gate Valves, Check

More information

PRODUCT OVERVIEW. FluoroSeal two piece trunnion mounted ball valves offer increased value by incorporating advanced design features

PRODUCT OVERVIEW. FluoroSeal two piece trunnion mounted ball valves offer increased value by incorporating advanced design features PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Power

More information

GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005

GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005 GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w

More information

5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Reduced Port. 2-pc, Split Body. Carbon or Stainless Steel

5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Reduced Port. 2-pc, Split Body. Carbon or Stainless Steel langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 98 inspection

More information

Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -

Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve - Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing

More information

PBV Ball Valves. Two Piece Flanged Trunnion Supported Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES

PBV Ball Valves. Two Piece Flanged Trunnion Supported Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES PBV Ball Valves Two Piece Flanged Trunnion Supported Ball Valves REQUEST A QUOTE sales@dkamans.com SCEDUE SERVICES 562-529-8400 WWW.DKAMANS.COM Manufacturer of Quality Valve Products Around the Globe At

More information

Fully Welded Ball Valves

Fully Welded Ball Valves Fully Welded Ball Valves API6D & API6D SS COMPANY PROFILE: Established: 1956, Family Owned and Operated Managing Director: Thomas Böhmer PhD Eng. (Dr. Ing.-Germany) Employees: 270 Annual Sales: Facilities:

More information

Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM

Control Valve. 3-Piece 30, 60, or 1/8 Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM 324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for

More information

CAMERON Fully Welded Ball Valves

CAMERON Fully Welded Ball Valves CAMERON Fully Welded Ball Valves Engineered for heavy duty, limited maintenance performance, with the strength of forged components and a lightweight, compact, spherical design Table of Contents CAMERON

More information

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing

More information

Full Opening Swing CHECK VALVE - API 6D

Full Opening Swing CHECK VALVE - API 6D Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How

More information

BALL VALVES AND ACTUATORS E-CATALOG

BALL VALVES AND ACTUATORS E-CATALOG BALL VALVES AND ACTUATORS E-CATALOG CONTENTS INTRODUCTION 3 MODEL SYSTEM 3-5 FLOATING TYPE SOFT SEATED BALL VALVE 6-8 CAST STEEL TRUNNION MOUNTED BALL VALVE 8-10 FORGED STEEL TRUNNION MOUNTED BALL VALVE

More information

GROVE B4, B5 and B7 Side-entry Ball Valves

GROVE B4, B5 and B7 Side-entry Ball Valves GROVE B4, B5 and B7 Side-entry Ball Valves Table of Contents GROVE B4, B5 and B7 SIDE-ENTRY BALL VALVES Features and Benefits Applications...1 GROVE B4 Design Features...2 Materials Specifications...4

More information

Trunnion Mounted Ball Valve MANUAL CONTENTS

Trunnion Mounted Ball Valve MANUAL CONTENTS Trunnion Mounted Ball Valve MANUAL CONTENTS M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SPX FLOW, Inc., the M&J Valve

More information

Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.

Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc. DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com

More information

87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE

87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE

More information

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98

More information

GALLI&CASSINA. Plug Valves. Conical

GALLI&CASSINA. Plug Valves. Conical Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure

More information

Floating Ball Valve - Design Features

Floating Ball Valve - Design Features 408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting

More information

Introduction. Application & Installation. Integral Block & Bleed Valves

Introduction. Application & Installation. Integral Block & Bleed Valves Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining

More information

TY-FLO 3 Piece Ball Valves

TY-FLO 3 Piece Ball Valves TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance

More information

Proudly represented exclusively by: Flowlink Enterprises Pty Ltd. Phone

Proudly represented exclusively by: Flowlink Enterprises Pty Ltd.  Phone Proudly represented exclusively by: Flowlink Enterprises Pty Ltd sales@flowlinkepl.com.au www.flowlinkepl.com.au Phone 1300 086 499 PREAMBLE This technical document contains proprietary information belonging

More information

Slab & Double Expanding Gate Valves

Slab & Double Expanding Gate Valves Slab & Double Expanding Gate Valves Double Expanding Characteristics The main feature of a double expanding gate valve is the 2 pieces obturator that guarantees a simultaneous mechanical seal both in the

More information

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas - International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.

More information

MAGNUM GATE VALVES. Invention, Unique Design & Extraordinary Craftsmanship. WORLDWIDE OILFIELD MACHINE Est. 1980

MAGNUM GATE VALVES. Invention, Unique Design & Extraordinary Craftsmanship.   WORLDWIDE OILFIELD MACHINE Est. 1980 TM MAGNUM GATE VALVES www.womusa.com Invention, Unique Design & Extraordinary Craftsmanship WORLDWIDE OILFIELD MACHINE Est. 980 Table of Contents Patented Dual-Seal Technology Magnum Gate Valve 2 Magnum

More information

TY-FLO 3 Piece Ball Valves

TY-FLO 3 Piece Ball Valves OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular

More information

EXECUTIONS DBBV S t a n d a r d e x e c u t i o n Part no. Description

EXECUTIONS DBBV S t a n d a r d e x e c u t i o n Part no. Description Double Block and Bleed Dual Expanding Plug Valve EXECUTIONS DBBV S t aa n d aa rr d ee xx ee cc u t i o n Part no. Description 1 Body 2 Lower plate 3 Upper plate 4 Plug 5 Slip 6 Seat seal 7 Stem 8 Yoke

More information

Double Block and Bleed Plug Valves

Double Block and Bleed Plug Valves Double Block and Bleed Plug Valves ASME Class 150 to 600 50 mm to 1050 mm (2 to 42 ) API 6D L&T Valves L&T Valves is a wholly owned subsidiary of Larsen & Toubro. Backed by a heritage of excellence that

More information

TRUNNION MOUNTED BALL VALVES. Ball Valves

TRUNNION MOUNTED BALL VALVES. Ball Valves TRUNNION MOUNTED BALL VALVES Ball Valves TABLE OF CONTENTS Design and Test Standards 3 Trunnion Ball Valve Features 4 Parts List and Material Specifications (2-Piece) 6 Parts List and Material Specifications

More information

Block & Bleed Valve.

Block & Bleed Valve. Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange

More information

VALVES API 6A Compact Ball Valves

VALVES API 6A Compact Ball Valves VALVES API 6A Compact Ball Valves Space and Weight Saving Zero Leakage and Superior Performance The Standard in Non-Standard Valve Production www.uscortec.com Compact Ball Valves CORTEC Compact Ball Valves

More information

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc. www.isvalve.com

More information

E N G I N E E R E D V A L V E S. B4, B5 & B7 Side Entry Ball Valves GROVE

E N G I N E E R E D V A L V E S. B4, B5 & B7 Side Entry Ball Valves GROVE B4, B5 & B7 Side Entry Ball Valves TABLE OF CONTENTS B4 B5 B7 SIDE ENTRY BALL VALVE FEATURES AND BENEFITS General Information 1 B4 Design Features 2 & 3 Valve Assembly and Cross Section 4 Dimensions and

More information