HOKE Monoflange Valves. Primary Isolation Valves
|
|
|
- Rachel Hines
- 6 years ago
- Views:
Transcription
1 HOKE Monoflange Valves Primary Isolation Valves
2 Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral / GYROLOK Tube Fitting Connections... 6 Standard Screwed Bonnet Dimensions OS&Y Bonnet Dimensions How to Order HOKE Monoflange Valves
3 HOKE - Monoflange Valves The HOKE Monoflange is designed for pressure instrument take-off points, sampling, injection, venting and purging applications. The Monoflange simplifies these applications by making them more compact, rigid, lighter, safer, and lower cost than the conventional piping valve assemblies. APPLICATIONS Primary Process Isolation Valve Pressure instrument take off points Sampling Systems (valve has an integral pipe probe or sampling probe) Chemical Injection Systems (valve has pipe probe/quill along with integral check valve) Flushing Connections Vent & Purge Applications Drains for tanks and pipes where space is limited Chemical Seal Applications Conventional Assembly FEATURES & BENEFITS Overall length reduced by ± 70% Overall weight reduced by ± 80% Brings pressure point closer to pressure measurement / instrument Reduced labor cost Reduced leak points Reduced need for support brackets Reduced bending moment/stress on primary piping connection HOKE Monoflange HOKE Monoflange Valves 3
4 Applications Upstream Offshore/Onshore Gas and Oil production and initial processing installations. Typically used on gauge pressure instrument applications to minimize the size and weight of the pipe-valve assemblies used for primary and/or secondary isolation, vent and calibration. Pressure Measuring Points Sample Connections Analytical Connections Features and Benefits Quick Spec Product Scope In accordance with ASME B16.5 for class Working Pressure 150 to 2500 (API 6A for 10K pressure class available) Working 450 F (232 C) for PTFE packing, Temperatures 1000 F (528 C) for Graphite packing Approvals API 607 5th Edition (fire test certified) ASME VIII (pressure boundaries) PED (Sound Engineering Practice) ASME B16.34 (bolting dimensions) EN (material traceability) One piece body means compact design with less leak points. Large variety of standard and optional materials and outlet options, mean you can select the style you need right from the catalog. HOKE utilizes Non-Rotating Stem Tip (NRT) technology. When the stem tip contacts the seat, it stops rotating, preventing the cross scoring and eventual leaks that can occur with ball type stems. Standard Materials: A479 Type 316L and NACE, A105 Carbon Steel HASTELLOY C276, MONEL, INCOLOY alloy 825, INCONEL alloy 625, Duplex A182, Titanium " (4,75 mm) standard orifice design means lower probability of plugging than competitive smaller port designs. Long life / Low leakage - Four rings PTFE Chevron style packing, or multi-ring set of grafoil surrounded by braided graphite standard. These standard packing sets are third party verified to exceed US EPA 40 CFR 60 emission standards by more than 5 times. Less probability of leaks mean less risk. High quality metal to metal shutoff meets ANSI Class VI criteria pressure Equipment Directive. Due to internal bore size and internal volumes up to and including 1 -inch/25mm, products offered in this catalog comply with S.E.P (Sound Engineering Practice) article 3, paragraph 3 of the Pressure Equipment Directive P.E.D. 97/23/EC and therefore CE marking is not applicable. 4 HOKE Monoflange Valves
5 Monoflange Valve Features & Benefits Non-Rotating Tip (NRT) conical plug stem forms consistent lapped mate with the seat ensuring bubble tight shutoff and prolonged stem and seat life OS&Y Bonnet (Optional) Anti-tamper handle option 4 rings PTFE Chevron style packing, or multi-ring set of grafoil surrounded by braided graphite standard. These standard packing sets are third party verified to meet or exceed US EPA 40 CFR 60 emission standards by more than 5 times. Solid bonnet stop pin standard vs. competitors hollow spring steel pins which can corrode and crack in salt water, or corrosive ambient environments. Standard materials of construction: SST, A ; SST A NACE; SA L, SA L NACE; Carbon Steel A105; Carbon Steel, A105 NACE; Low Temp CS A350 LF2; HASTELLOY C; INCOLOY alloy 825; INCONEL alloy 625; MONEL ; Duplex; Super Duplex, Titanium (Gr 2); Super Duplex A182F55; Screwed bonnet and OS&Y bonnets available Raised face (RF) and Ring Type Joint (RTJ) flange styles standard (API Flanges are available upon request) HOKE Monoflange Valves 5
6 HOKE Integral / GYROLOK Tube Fitting Connections The HOKE range of standard monoflanges are available with the option of the integral / GYROLOK tube fitting connections. The integral / GYROLOK tube fitting connection is machined directly into the body of the valve or manifold, allowing tubing to be directly connected without the use of traditional threaded (NPT, BSP) connections. The integral / GYROLOK connection provides a safer connection system for high pressure, severe, steam or sour gas service where leakage has dangerous consequences. An Explanation of Integral GYROLOK Tube Fitting Connections Eliminates traditional threaded tubing connections Provides a safer and more consistent tube connection Saves assembly time during field assembly Reduces potential leak paths No need for sealing tape or liquid sealing compounds Fully field maintainable Successfully used for over 20 years in many offshore applications Available in 1/2" and 10mm tube connections Integral Connection Tube Front Ferrule Nut Rear Ferrule 6 HOKE Monoflange Valves
7 HMF1B Block Monoflange Valves E D = Hole Diameter N = Number of Holes OD C = Bolt Circle Diameter NPT (F) Female Outlet Standard A RF= Standard Raised Face RTJ= Ring Joint T H Standard Screwed Bonnet Dimensions (inches) Size Class RF RTJ A E D C N T H OD N/A / / /2" / / / / N/A / / /4" / / / / / / " / / / / /2" / / / / / / " / / / HOKE Monoflange Valves 7
8 HMF2B Block E D = Hole Diameter N = Number of Holes OD C = Bolt Circle Diameter NPT (F) Female Outlet Standard Bleed A B RF= Standard Raised Face RTJ= Ring Joint T 1/2" FNPT vent port w/ plug supplied loose standard H Standard Screwed Bonnet Dimensions (inches) Size Class RF RTJ A B* E D C N T H OD N/A / / /2" / / / / N/A / / /4" / / / / / / " / / / / /2" / / / / / / " / / / HOKE Monoflange Valves *When fully open.
9 HMF3B Block 1 E D = Hole Diameter N = Number of Holes OD C = Bolt Circle Diameter NPT (F) Female Outlet Standard Bleed Block 2 B A F B RF= Standard Raised Face RTJ= Ring Joint T H 1/2" FNPT vent port w/ plug supplied loose standard Standard Screwed Bonnet Dimensions (inches) Size Class RF RTJ A B* E F D C N T H OD N/A / / /2" / / / / N/A / / /4" / / / / / / " / / / / /2" / / / / " / / / / / *When fully open. HOKE Monoflange Valves 9
10 HMF1A Block E OD D = Hole Diameter N = Number of Holes C = Bolt Circle Diameter NPT (F) Female Outlet Standard A RF= Standard Raised Face RTJ= Ring Joint T H OS&Y Bonnet Dimensions (inches) Size Class RF RTJ A E D C N T H OD N/A / / /2" / / / / N/A / / /4" / / / / / / " / / / / /2" / / / / / / " / / / HOKE Monoflange Valves
11 HMF2A Block E D = Hole Diameter N = Number of Holes OD C = Bolt Circle Diameter NPT (F) Female Outlet Standard Bleed A B RF= Standard Raised Face RTJ= Ring Joint T 1/2" FNPT vent port w/ plug supplied loose standard H OS&Y Bonnet Dimensions (inches) Size Class RF RTJ A B* E D C N T H OD N/A / / /2" / / / / N/A / / /4" / / / / / / " / / / / /2" / / / / / / " / / / *When fully open. HOKE Monoflange Valves 11
12 HMF3A Block 1 E D = Hole Diameter N = Number of Holes OD C = Bolt Circle Diameter NPT (F) Female Outlet Standard Block 2 Bleed B A B F 1/2" FNPT vent port w/ plug supplied loose standard RF= Standard Raised Face RTJ= Ring Joint T H OS&Y Bonnet Dimensions (inches) Size Class RF RTJ A B* E F D C N T H OD N/A / / /2" / / / / N/A / / /4" / / / / / / " / / / / /2" / / / / / / " / / / *When fully open. 12 HOKE Monoflange Valves
13 HOKE Monoflange Ordering Information How To Order Typical Ordering Part Number HMF 1 A 1 A 1 A YL 1 AB STYLE 1 = Single Block 2 = Block & Bleed 3 = Double Block & Bleed PRIMARY VALVE A = OS & Y B = Needle PACKING 1 = PTFE 2 = Graphite 3 = Firesafe 4 = Low Emission FLANGED INLET A = 1/2" ANSI B = 3/4" ANSI C = 1" ANSI D = 1 1/2" ANSI E = 2" ANSI F = 1 13/16" API G = 2 1/16" API H = 2 9/16" API I = 3" ANSI INLET FACE 1 = RF Smooth 2 = RTJ Ring Joint 3 = BX NOTE: 1/2" FNPT vent port w/ plug supplied loose standard. Options AB = Anti Tamper Vent* AC = Lockable Vent* AD = Anti Tamper Isolate* AE = Lockable Isolate* AH = BSPP Connections FS = Firesafe AO = NORSOK M-650 Material Required RATING 1 = 150# 2 = 300# 3 = 600# 4 = 900#/1500# 5 = 2500# 6 = 2,000 API 7 = 3000 API 8 = 5000 API 9 = 10,000 API ALLOY YL = 316/316L DX3 = Duplex 22% CR D50 = Super Duplex 25% CR 625 = INCONEL alloy = INCONEL alloy 825 6MO = 254 SMO M = MONEL alloy 400 HC = H C276 Ti = Ti Tb = Ti w/anodize CS1 = A105N CS2 = A350 LF2 OUTLET B = 10mm Integral GYROLOK C = 1/4" GYROLOK D = 1/2" GYROLOK F = 3/4" GYROLOK G = 1/4" Female NPT H = 1/2" Female NPT I = 3/4" Female NPT J = 9/16" MP K = 1/2" Male NPT * Available only on needle bonnet HOKE Monoflange Valves 13
14 NOTES 14 HOKE Monoflange Valves
15 NOTES HOKE Monoflange Valves 15
16 Continuously Improving Flow Control. Worldwide. The HOKE Brand is just one product offering manufactured and supplied by CIRCOR Energy, an ISO 9001:2008 registered facility headquartered in Spartanburg, SC, USA, a division of CIRCOR International (NYSE:CIR). HOKE distributors are worldwide. Contact us or visit our website to locate the nearest distributor to assure your projects are consistently implemented across the globe with the greatest Safety, Integrity and Reliability. HOKE, Inc. PO Box 4866 Spartanburg, SC USA sales-hoke@circor.com APS5983
Hex Monoweld Valves. Built Hex tough for a lifetime of use. See how inside... www. hexvalve.com
Hex Monoweld Valves Built Hex tough for a lifetime of use. See how inside... HEXVALVE A ivision of Richards ndustries 370 Wasson Road Cincinnati, OH 45209 toll free. 800.543.73 local. 53.533.5600 fax.
T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
Page 1 Worldwide Rev e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
Monoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
Block & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
Double Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003
Double Block and Bleed Manifolds and Flanged Products Catalog 4190-FP October 2003 Contents Page 3 Introduction. Page 4/5 Application illustrations. Page 6 Ball valve specification. Page 7 Outside screw
Instrumentation Products Monoflanges & VariAS-Blocks
Instrumentation Products Monoflanges & VariAS-Blocks Introduction Introduction The AS-Schneider Monoflanges and VariAS- Blocks are designed to overcome the problems of traditional assemblies on primary
we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports.
introduction we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports. KpL valve ind. co., Ltd. was established in 1986 and for
Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
Instrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
Instrumentation & Piping Products Monoflange & up to 2" Full Bore DBB Valves
Instrumentation & Piping Products Monoflange & up to 2" Full ore D Valves (Up to and including 15,000 psi / 1035 bar) Innovative and Reliable Valve Solutions Monoflange Ordering Information NV Order Code
Needle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
)SLIM LINE) MONOFLANGE VALVES
)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are
INTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
Angle Type Needle Valves - Miniature Series
Angle Type Needle Valves - Miniature Series Mod. 020-021 - 022 Applications: Pressure instruments isolation (gauges, switches, transmitters, etc.) Connections: Threaded to ANSI-ASME B1.20.1, ISO 228 -
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Valves and manifolds
Process industry We offer a wide range of accessories for various applications Stopcocks DIN valves Ball valves Bonnet version needle valves are available in various options, materials and connections.
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
Monoblock DBB. Page 1
Monoblock DBB Page 1 Page 2 Ball bore size 10 mm Ball and Bleeder Bleeder Antitamper ( optional ) Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend
Instrumentation & Piping valves
Instrumentation & Piping valves Monoflange valves Plug valves Large bore ball valves Injection & sampling valves Double block & bleeds Various instrumentation valves DELIVERY PROGRAM www.imperialvalve.nl
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
PERFECTION IS OUR STANDARD...
PERFECTION IS OUR STANDARD... WELCOME TO COLSON X-CEL LTD Providing Precision engineering solutions for the most demanding environments Colson X-Cel Ltd is a well established and most highly respected
Sami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI /
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Static Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Double Block & Bleed Pipeline Ball Valves Taurus Series
Double Block & Bleed Pipeline Ball Valves Taurus Series General Features Features Designed in accordance with Industry standards i.e. ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313 Full Bore Meets
Instrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve posioned in the flow stream to allow or prevent the flow (ball or p); 2. Stem: part which connects the obturator
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
TRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
Anderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
Rosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated
Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
Kerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
Rosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated
Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
Ball Valves & Manifolds. Stewart-Buchanan Gauges Ltd AN EMPLOYEE-OWNED COMPANY
Ball Valves & Manifolds Stewart-Buchanan Gauges Ltd AN EMPLOYEE-OWNED COMPANY About Us At Stewart-Buchanan Gauges, we are a company that likes to stay one step ahead. Our commitment to innovation has led
Company and Product Summary
Company and Product Summary Stewart-Buchanan Gauges Ltd AN EMPLOYEE-OWNED COMPANY PLEASE VISIT OUR WEBSITE AT: www.stewarts-group.com About Us At Stewart-Buchanan Gauges Ltd, our aim is to continually
Overview Brochure. Multi Instruments, Edisonweg 1, 4207HE Gorinchem, The Netherlands
Overview Brochure Contact details Multi Instruments: Phone: +31 (0)183 62 88 88 Fax.: +31 (0)183 62 81 82 E-mail: Instrumentation@multi- Homepage: www.multi- http://www.multi http://www.multi-- MI/AP revision
needle valve 2219 Series Severe Service Needle Valves
2219 Series Severe Service Needle Valves HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com needle valve 2219
Instrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
Manifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
ANDERSON GREENWOOD H7/H71 HAND VALVES
3 /16 (4.8 mm) orifice hard-seated hand valves for pressures to 6000 and 10000 psig (414 and 689 barg) FEATURES H7 GENERAL APPLICATION H7 series valves are designed for safe, repetitive bubble-tight closure,
Instrumentation Valves
Instrumentation Valves Sabre Instrumentation Valves Contents Introduction 2 Model Numbering System 3 Hand Valves 4 VX1, VX2 and VX3 Forged Hand Valves 5 FVX1, FVX2, FVX1A, FVX2A, OFVX1 and OFVX2 Rising
Integral Block & Bleed Valves
www.hy-lok.com Catalog No. H-100PIV Feb. 2006 Integral Block & Bleed Valves 2003, 2006 HY-LOK CORPORATION All rights reserved Integral Block & Bleed Valves Contents INTRODUCTION 3 APPLICATION & INSTALLATION
Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev MA August Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
Anderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
Manifold Valves DBB and Flanged
Hydraulik - Pneumatik Steffen Haupt Moritzer Straße 35 01589 Riesa Telefon: 03525 6801-0 Telefax: 03525 680120 info@haupt-hydraulik.de Manifold Valves DBB and Flanged 4190-FP Juli 2007 KATALOG Vertrieb:
Products for the Oil & Gas Industry
Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
CRYOGENIC. Italian Manufactured, Italian Quality
Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold
TRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Through Conduit Gate Valves Slab & Expanding
Through Conduit Gate Valves Slab & Expanding Through Conduit Slab Gate valve Slab Gate Valves are manufactured with a full bore port, rising stem OS&Y and with floating seats and gate, pressure energized,
PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
Rosemount Twisted Square Thermowells
Product Data Sheet November 2017 00813-0300-4952, Rev AA Rosemount Twisted Square Thermowells Wide variety of industry standard process connections including flanged, threaded, welded, and Van Stone Large
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA WHAT IS A TORFLOW? TheTORFLOW is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement.
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
General Specifications
General Specifications GS 22B01C05-00EN-A C13ST Manifolds for Traditional Mount Gauge and Absolute Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-2 2-Valve manifolds are
PBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
IN-LINE DISC & PISTON VALVES
ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded
DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
PISTON DIVERTER VALVES
DP Series DIVERTER VALVES PISTON DIVERTER VALVES PROCESS VALVES STRAHMAN DEAD SPACE FREE DIVERTER VALVES Piston Diverter Valves Code: DPS4 Standard branch angles: 45 o and 90 o 60 o and specific angles
MODEL 5800 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL
Installation, Operation, and Maintenance Instructions MODEL 5800 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------
PRECISIONISO 9001:2008
SUSTECH PRECISIONISO 9001:2008 Direct Mount Manifolds L Series Rated up to 10 000 psi Compact design Ease of use www.sustech.com sales@sustech.com l +27 11 452-9545 Contents Manifolds and Accessories Manifold
Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications
PRODUCT SELECTION GUIDE Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications...Make the leak free connections with Sealexcel products at competitive
P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
instrumentation ball valves
7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com instrumentation
metering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
SV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
"S" Series Needle/Gauge Valves
"S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads
Formed Sampling Cylinders and Accessories Index amp ling cylinde HOKE Inc.
Formed Sampling Cylinders and Accessories Index Sampling Cylinders 2 Design, Features, Applications Cylinder Accessories 3 Collars, Flanges, Caps, Carrying Handles Safety Relief Devices Cylinder Valves
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
General Specifications
General Specifications GS 22B01C06-01EN-A C13ST Manifolds for Traditional Mount Differential Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-3 and C13ST-5 manifolds are
ID & IP SERIES IN-LINE DISC AND PISTON VALVES
ID & IP SERIES IN-LINE DISC AND PISTON VALVES IN-LINE DISC AND PISTON VALVES M SEAL IN-LINE PISTON VALVE CODE: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded packing
Process to Instrument Valves Monoflanges and VariAS-Blocks
Process to Instrument Valves Monoflanges and VariAS-Blocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation
9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 PRODUCTS INDEX 4
Fluid control division MANIFOLD CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 INDEX 4 ACCESSORIES MOUNTING BRACKETS 35 OVAL FLANGES 35 BLEED 35 CONDENSING POTS 36 SYPHONS 36 AIR FEED HEADERS
ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
Instrument Manifolds Flanged Products, Ball Valves and Hand Valve Directory. Catalog 4190-PD April 2003
Instrument Manifolds Flanged Products, Ball Valves and Hand Valve Directory Catalog 4190-PD April 2003 Introduction From its ISO9001:2000 facility, Parker Hannifin's Instrumentation Products Division designs
SAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
Anderson Greenwood Instrumentation Products - Manifolds and Accessories
Anderson Greenwood Instrumentation Products - Manifolds and Accessories Total Flow Control Solutions Flow, Static Pressure and Liquid Level Manifolds Flow Control ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application