Industrial Bronze and Iron Price List
|
|
|
- Roland Lee
- 5 years ago
- Views:
Transcription
1 Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product information. PRODUCT / SERIES TYPE BRONZE GATE VALVES BRONZE GLOBE & ANGLE VALVES BRONZE CHECK VALVES PRESS X PRESS END, GATE, GLOBE & CHECK VALVES CAST IRON VALVES CAST IRON VALVES - "HI" SERIES CHAINWHEEL OPERATOR & SQUARE OPERATING NUTS UL/FM VALVES, U-BOLT VALVES & SILENT CHECKS BYPASS, GEAR OPERATOR, TAPPING & SERVICE PARTS PAGE NUMBER Visit our website for complete product details, information and terms and conditions of sale. Hammond Valve Company West Stratton Drive New Berlin WI Phone: (262) Website:
2 BRONZE GATE VALVES MODEL IB645 IB647 IB640 IB635 IB617 IB646 IB638 IB SWP 125 SWP 125 SWP 125 SWP 125 SWP 150 SWP 150 SWP 150 SWP 200 WOG 200 WOG 200 WOG 200 WOG 200 WOG 300 WOG 300 WOG 300 WOG FNPT SOLDER FNPT SOLDER FNPT FNPT FNPT FNPT NRS NRS RS RS RS NRS NRS RS TB TB TB TB UB TB UB TB MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 1/4" /8" /2" /4" " /4" /2" " /2" 1, , , , , , , " 1, , , , , , , " 4, , , , , , MODEL IB629 IB648 IB610 IB650 IB651 IB652 IB654 IB SWP 150 SWP 150 SWP 200 SWP 200 SWP 300 SWP 300 SWP 300 WSP 300 WOG 300 WOG 300 WOG 400 WOG 400 WOG 1000 WOG 1000 WOG 1000 WOG FNPT SOLDER FNPT FNPT FNPT FNPT FNPT FNPT RS RS QUICK-OPEN RS / UB RS / UB RS / UB RS / UB NRS / UB UB UB W/ LEVER CU/NI STAINLESS CU/NI STAINLESS STAINLESS MSS SP-80 MSS SP-80 HANDLE SEATS SEATS SEATS SEATS SEATS MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 1/4" /8" /2" /4" " , /4" , /2" , , " , , , , , , /2" 1, , , , , " 1, , , , , " 10, NRS = NON-RISING STEM RS = RISING STEM TB = THREADED BONNET UB = UNION BONNET FNPT = FEMALE NATIONAL PIPE THREAD Page 2
3 BRONZE GLOBE VALVES MODEL IB440 IB418 IB413T IB423 IB415 IB SWP 125 SWP 150 SWP 150 SWP 200 SWP 300 SWP 200 WOG 200 WOG 300 WSP 300 WOG 400 WOG 1000 WOG FNPT SOLDER FNPT SOLDER FNPT FNPT TB TB UB UB TB UB BRONZE DISC BRONZE DISC TFE DISC TFE DISC NEEDLE DISC BRONZE DISC MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 1/8" /4" /8" /2" /4" " /4" /2" , , " , , , /2" 2, , , " 2, , , SS SEAT & DISC ANGLE VALVES MODEL IB434 IB444 MODEL IB463 IB454T 200 SWP 300 SWP 125 SWP 150 SWP 400 WOG 1000 WOG 200 WOG 300 WOG FNPT FNPT FNPT FNPT UB UB TB UB STAINLESS SEAT STAINLESS SEAT ANGLE ANGLE & DISC & DISC BRONZE DISC TFE DISC MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 1/4" /4" /8" /8" /2" /2" /4" /4" " " /4" 1, , /4" /2" 1, , /2" , " 2, , " 1, , /2" 2 1/2" 1, TB = THREADED BONNET UB = UNION BONNET FNPT = FEMALE NATIONAL PIPE THREAD Page 3
4 BRONZE BODY CHECK VALVES MODEL IB Y IB940 IB Y 125 SWP 125 SWP 125 SWP 125 SWP 150 SWP 200 WOG 200 WOG 200 WOG 200 WOG 300 WOG FNPT FNPT FNPT SOLDER FNPT HORIZ. SWING HORIZ. SWING HORIZ. SWING HORIZ. SWING Y PATTERN BRONZE DISC BRONZE DISC TFE DISC BRONZE DISC BRONZE BODY Y PATTERN BRONZE DISC MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 1/4" /8" /2" /4" " /4" /2" " , /2" 1, , , , " 2, , , , MODEL IB946 IB945 IB944 IB SWP 150 SWP 200 SWP 300 SWP 300 WOG 300 WOG 400 WOG 600 WOG FNPT SOLDER FNPT FNPT HORIZ. SWING HORIZ. SWING Y PATTERN Y PATTERN BRONZE BODY BRONZE BODY BRONZE BODY BRONZE BODY TFE DISC TFE DISC BRONZE DISC BRONZE DISC MSS SP-80 MSS SP-80 MSS SP-80 MSS SP-80 1/4" /8" /2" /4" " /4" /2" " , , , /2" 1, , " 2, , FNPT = FEMALE NATIONAL PIPE THREAD Page 4
5 PRESS-END VALVES BRONZE GATE VALVES BRONZE GLOBE VALVES MODEL IB645-P2 IB640-P2 IB617-P2 IB638-P2 IB415-P2 IB440-P2 IB413T-P F F F F F F F PRESS x PRESS PRESS x PRESS PRESS x PRESS PRESS x PRESS PRESS x PRESS PRESS x PRESS PRESS x PRESS NON-RISING STEM RISING STEM RISING STEM NON-RISING STEM RISING STEM RISING STEM RISING STEM THREADED BONNET THREADED BONNET UNION BONNET UNION BONNET THREADED BONNET THREADED BONNET UNION BONNET BRONZE DISC NEEDLE DISC TFE DISC 1/2" /4" " /4" /2" , " , , BRASS AND BRONZE CHECK VALVES MODEL 969 IB904-P2 IB940-P2 509Y-P2 IB943-P F F F F F PRESS x PRESS PRESS x PRESS PRESS x PRESS PRESS x PRESS PRESS x PRESS HORIZ. SWING HORIZ. SWING HORIZ. SWING HORIZ. SWING BRASS BODY & DISC BRONZE DISC TFE DISC BRONZE DISC IN LINE SPRING LOADED LIFT CHECK Y PATTERN BUNA DISC 1/2" /4" " /4" /2" " Page 5
6 FLANGED CAST IRON BODY VALVES MODEL IR1138 IR1140 IR330 IR116 IR1124 GATE GATE GATE GLOBE CHECK NRS, BB OS&Y, BB OS&Y, BB OS&Y, BB HORIZ. SWING 125 SWP 125 SWP 250 SWP 125 SWP 125 SWP 200 WOG 200 WOG 500 WOG 200 WOG 200 WOG BRONZE TRIM BRONZE TRIM BRONZE TRIM BRONZE TRIM BRONZE TRIM MSS SP-70 MSS SP-70 MSS SP-70 MSS SP-85 MSS SP-71 2" 1, , , , /2" 1, , , , , " 1, , , , , " 1, , , , , " 3, , , , , " 3, , , , , " 5, , , , , " 9, , , , , " 13, , , , ASSEMBLED AND TESTED IN USA WITH DOMESTIC AND INTERNATIONALLY SOURCED COMPONENTS. NRS = NON-RISING STEM OS&Y = OUTSIDE SCREW & YOKE BB = BOLTED BONNET Page 6
7 "HI" SERIES FLANGED CAST IRON BODY VALVES MODEL IR1138HI IR1140HI IR330HI IR116HI IR313HI IR322HI IR1124HI GATE GATE GATE GLOBE GLOBE CHECK CHECK NRS, BB OS&Y, BB OS&Y, BB OS&Y, BB OS&Y, BB HORIZ. SWING HORIZ. SWING 125 SWP, 200 WOG 125 SWP, 200 WOG 250 SWP, 500 WOG 125 SWP, 200 WOG 250 SWP, 500 WOG 250 SWP, 500 WOG 125 SWP, 200 WOG BRONZE TRIM BRONZE TRIM BRONZE TRIM BRONZE TRIM BRONZE TRIM BRONZE TRIM BRONZE TRIM MSS SP-70 MSS SP-70 MSS SP-70 MSS SP-85 MSS SP-85 MSS SP-71 MSS SP-71 2" , , , /2" 1, , , , , , " 1, , , , , , " 1, , , , , , , " 2, , , , , " 2, , , , , , , " 4, , , , , " 8, , , , , " 11, , , , " 22, , " 34, , " 44, , " 61, , " 91, , "HI" SERIES FLANGED CAST IRON BODY SPECIALTY VALVES MODEL IR1144HI IR1146HI IR1126HI IR1913HI IR1937HI GATE GATE CHECK GATE CHECK NRS, BB OS&Y, BB HORIZ. SWING OS&Y, BB HORIZ. SWING 125 SWP, 200 WOG 125 SWP, 200 WOG 125 SWP, 200 WOG 125 SWP, 200 WOG 125 SWP, 200 WOG ALL IRON ALL IRON ALL IRON SS TRIM SS TRIM MSS SP-70 MSS SP-70 MSS SP-71 MSS SP-70 MSS SP-71 2" 1, , , , /2" 1, , , , , " 1, , , , , " 2, , , , , " 4, , , , , " 4, , , , , " 7, , , , , " 13, , , , , " 18, , , , " 16" 18" 20" 24" PLEASE REFER TO CATALOG SPEC SHEET FOR TEMPERATURE/PRESSURE RATINGS. 3% NICKEL IRON BODY NRS = NON-RISING STEM BB = BOLTED BONNET OS&Y = OUTSIDE SCREW & YOKE Page 7
8 CHAINWHEEL OPERATOR & SQUARE OPERATING NUT IRON VALVE ACCESSORY LIST PRICE ADDERS FOR CAST IRON BODY GATE VALVES CAST IRON CHAINWHEEL & GUIDE (REFER TO SIZING TABLE BELOW TO DETERMINE CORRET CHAINWHEEL PART NO.) CHAIN TRADE PART NO. FITS HANDWHEEL DIAMETER LIST LIST LIST PART NO. LIST CIRG-1.5 6" - 7.5" /0 POA POA 2" 2882M SQ CIRG " - 9" 1, /0 POA POA 2 1/2" 2882M SQ CIRG " " 1, /0 POA POA 3" 2882M SQ CIRG " " 1, /0 POA POA 4" 2882M SQ CIRG " - 19" 3, /0 POA POA 5" - 6" 2882M SQ CIRG " - 22" POA 5/0 POA POA 8" 2882M SQ CIRG " - 26" POA 5/0 POA POA 10" 2882M SQ CIRG " - 30" POA 5/0 POA POA 12" 2882M SQ ONE MASTER LINK IS REQUIRED PER VALVE SET-UP CHAINWHEEL OPERATOR SIZING TABLE HANDWHEEL DIAMETER BY MODEL MODEL NO. VALVE IR1138 Series IR1140 Series IR330 Series 2" 7" 7" 7" 2 1/2" 7" 7" 8" 3" 8" 8" 10" 4" 10" 10" 12" 5" 12" 12" 12" 6" 12" 12" 14" 8" 14" 14" 16" 10" 16" 16" 18" 12" 18" 18" 20" 14" 20" 20" 16" 22" 22" 18" 24" 24" 20" 24" 24" 24" 30" 30" GALVANIZED OR STAINLESS STEEL CHAIN PER FOOT MASTER LINK SQUARE OPERATING NUT FOR NON-RISING STEM IRON GATE VALVES Page 8
9 UL/FM IRON U-BOLT & UL/FM GATES MODEL IR1140-UL IR1124-UL MODEL IR337HI 118 GATE-OS & Y CHECK GATE VALVE GATE VALVE IBBM IBBM U-BOLT OS&Y-BRZ 175 PSI WWP 175 PSI WWP BRZ TRIM UL/FM UL/FM UL/FM NPT NPT N.Y.C.B.S.A BRONZE TRIM 1/4" /2" 1, /8" " 1, , /2" " 1, , /4" " 2, , " " 4, , /4" " 25, /2" " , /2" 1, " 1, " CAST IRON BODY SILENT CHECK WAFER & GLOBE STYLE CLASS 125 AND 250 MODEL IR9253* IR9354* STYLE WAFER GLOBE CLASS 125, STAINLESS STEEL DISC, SEAT, SPRING AND SCREWS 2" /2" , " , " 1, , " 1, , " 2, , " 4, , " 6, , " 14, " 16" 18" 20" 24" * International Valve Note: For Silent Check valves that are 3rd Party Certified to NSF/ANSI-372 must be ordered as Milwaukee Brand 1400 or 1800 Series. Page 9
10 GEAR OPERATOR 2" - 3" /2" POA 8, " /2" 3, /2" 8, " /4" 3, /4" 8, " /4" 3, /4" 8, " /4" 4, /4" 13, " " 4, " 13, " " 5, " 13, " " 5, " 14, " " 5, " 14, " " 5, " 14, " " 5, " 15, " " 5, " 15, MODEL 2974-RPR-() COMPLETE REPAIR KIT 2" /2" " " " " 1, " 1, , " 2, , " 2, , REPLACEMENT PACKING BYPASSES, GEARS & TAPPINGS TAPPING CHARGE (SPECIFY LOCATION) CHECK VALVE REPAIR KITS 2974-HGR-() HANGER REPAIR KIT HANDWHEEL FOR BRONZE VALVES BYPASS (SPECIFY LOCATION) MAX TAP AS NOTED W/ GLOBE VALVE NOTED CONTAINS: DISC, WASHER, DISC NUT, SCREW, HANGER, HANGER PIN, PLUG GASKET, & COVER GASKET CONTAINS; HANGER, HANGER PIN, COVER GASKET, PLUG GASKET MISCELLANEOUS PARTS HANDWHEEL FOR IRON VALVES BONNET GASKET (ALL VALVES) (ALL VALVES) 1/4" - 3/4" " /4" - 1 1/2" " /2" " " " " " " " MINIMUM ORDER/PARTS = $50.00NET PARTS ARE NON-RETURNABLE IRON BODY VALVE PACKING IS PACKAGED IN SETS OF 6 RINGS, LIST PRICING IS PER RING FACTORY INSTALLED 2974-DIS-() DISC REPAIR KIT CONTAINS: DISC, WASHER, DISC NUT, SCREW, PLUG GASKET, COVER GASKET PTFE PACKING FOR ALL BRONZE, & IRON, VALVES Page 10
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
TABLE OF CONTENTS IND0610 EFFECTIVE SUPERCEDES 1109 BRONZE GATE VALVES PAGE 1 BRONZE GLOBE/ANGLE VALVES PAGE 2 SIMILARITY CHART-PART 2 PAGE 12
TABLE OF CONTENTS IND0610 EFFECTIVE 060110SUPERCEDES 1109 BRONZE GATE VALVES PAGE 1 BRONZE GLOBE/ANGLE VALVES PAGE 2 BRONZE CHECK VALVES CAST IRON VALVES-"A" SERIES CHAINWHEELS, SQUARE OP NUTS CAST IRON
Brass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2011 Supersedes BIV-01-11 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE GATE VALVES
QUALITY YOU CAN BUILD ON CONDENSED CATALOG
QUALITY YOU CAN BUILD ON CONDENSED CATALOG Pressed for time? JUST PRESS, CRIMP AND TRIPLE YOUR PRODUCTIVITY 1. Reduce installation time up to 68% with Hammonds s extensive new line of UltraPress press-connection
UP-0318 Effective: March 1, 2018
Ultra-Pure List Price Sheet For Use in Potable Water Service UP-0318 Effective: March 1, 2018 A Milwaukee Valve Product Revised: 09/26/2018 Suggested list prices are subject to change without notification.
UP-0718 Effective: July 2, 2018
Ultra-Pure List Price Sheet For Use in Potable Water Service UP-0718 Effective: July 2, 2018 A Milwaukee Valve Product Revised: 09/24/2018 Suggested list prices are subject to change without notification.
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
UP-0515 Effective: 05/18/15
Ultra-Pure List Price Sheet For Use in Potable Water Service UP-0515 Effective: 05/18/15 A Milwaukee Valve Product Revised: 06/12/17 Suggested list prices are subject to change without notification. Visit
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
Brass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2015 Supersedes BIV-06-11 CLASS 125 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE
Brass, Bronze, Iron and Stainless Steel Valves
Price Schedule January 1, 2018 Supersedes BIV-06-15 Brass, Bronze, Iron and Stainless Steel Valves 07 BRONZE GATE VALVES CLASS 125 ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC
Commercial and Industrial Ball Valve Price List
Commercial and Industrial Ball Valve Price List TABLE OF CONTENTS BV-1017 Effective: October 2, 2017 Supersedes: BV-0217 Suggested list prices are subject to change without notification. Visit our Website
Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
Division 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
SECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
SECTION VALVES. A. Extent of Valve Work is indicated on the Drawings and by the Requirements of this Section.
PART 1 GENERAL 1.01 DESCRIPTION OF WORK SECTION 22412 VALVES A. Extent of Valve Work is indicated on the Drawings and by the Requirements of this Section. B. All valves, except those are 2 in diameter
1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
Stainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
Lead-free valves for potable water systems.
Lead-free valves for potable water systems. UltraPure for purer water. The new standard. On January 1, 2010, new laws went into effect that regulate lead content in plumbing products used for potable
Herpteraium SECTION VALVES GENERAL
SECTION 22 05 23 VALVES GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
***************************************************************************************************************
15515 VALVES, HANGERS, AND SPECIALTIES *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number:23 21 16 ***************************************************************************************************************
Price Book - Section C Valves and Hose Equipment
Kennedy Valves O.S.&Y. Gate Valve UL/FM Resilient Wedge w/ 3 /4" Tap and Plug - Model #4068A 2 1 /2" 2265 $743.00 3" 2266 $858.50 4" 2267 $996.00 6" 2269 $1,449.00 8" 2268 $2,379.00 10" 2264 $3,891.00
See our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
SECTION PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL
SECTION 22 10 10 PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
visit us online at
PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
Price Book - Section C Valves and Hose Equipment
Effective Date Price Book - Kennedy Valves O.S.&Y. Gate Valve UL/FM Resilient Wedge w/ 3 4" Tap and Plug - Model #4068A 2 2" 2265 $579.00 3" 2266 $669.00 4" 2267 $776.00 6" 2269 $,30.00 8" 2268 $,855.00
CONDENSED CATALOG QUALITY IS MORE THAN WHAT MEETS THE EYE.
CONDENSED CATALOG QUALITY IS MORE THAN WHAT MEETS THE EYE. Pressed for time? JUST PRESS, CRIMP AND TRIPLE YOUR PRODUCTIVITY 1. Reduce installation time up to 68% with Milwaukee Valve s extensive new line
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
Lead-free valves for potable water systems. Rev 02/17
Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
AWWA, RESILIENT WEDGE GATE VALVES
Type AVK Ref. # Size Weight kg lb US $ Series 04 Wrench nut Ductile Iron Series 08 Handwheel for AVK gate valves series 45, 55, 65 and 66 With bolt and washer Grey cast iron Size 1"-30" Series 18/45/55/65/66
catalog C-NPS-1014 NIBCO Press System
catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
SECTION (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Valves. B. Related Sections: 1.02 REFERENCES 1. Section 22 05 53 (15075) Identification
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
A. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SECTION VALVES PART 1 - GENERAL
1.01 RELATED DOCUMENTS SECTION 15100 VALVES PART 1 - GENERAL A. The work in this section includes the furnishing and installation of all control valves and accessories shown on the construction plans and
Customer Service : Tel Toll-free Fax
Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves...3-4 TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
Trunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
Manufacturer & Supplier of High Quality Industrial Valves. Manufacturer & Supplier of High Quality Industrial Valves
Manufacturer & Supplier of High Quality Industrial Valves P (716) 681-5825 F (716) 706-1319 sales@lancevalves.com lancevalves.com A Reputation Earned by High Quality Industrial Valves We know you have
62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves
![62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves](/thumbs/86/94937198.jpg "62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves")
Table of Contents Bronze Ball Valves 3 Series See Commercial Price List [CPPL9000] 70 Series...4-5 71 Series...5 75 Series...6 77 Series...7-8 77C Series...8-9 77W Series See Commercial Price List [CPPL9000]
SECTION FACILITY FUEL OIL PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
Gate Valves Globe Valves Check Valves. The Valve Experts IRON VALVES
Gate Valves Globe Valves Check Valves The Valve Experts IRON VLVES Iron Valves Index General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V Coefficients... 8 Gate Section... 9 Globe Section...
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
GENERAL CATALOGUE Catalogue 2013
GENERAL CATALOGUE Catalogue 2013 Company Profile GALA - Extends Business on a Global Perspective. GALA company offers a wide range of products and systems in the field of valves, piping, and seismic isolation
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER ADDITIONS AND RENOVATIONS
LOWER MACUNGIE TOWNSHIP COMMUNITY CENTER. SECTION.0 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART - GENERAL. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
VALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
BuildingName The Description of the Project P DOCUMENTS SPECIFICATION DIVISION 22 SECTION DESCRIPTION DIVISION 22 SECTION VALVES
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
Copyright 2012 AIA MasterSpec Premium 06/12 PRODUCT MASTERSPEC LICENSED BY ARCOM TO CONBRACO, INC.
This Product MasterSpec Section is licensed by ARCOM to Apollo Flow Controls, Conbraco Industries, Inc ("Licensee").This Product MasterSpec Section modifies the original MasterSpec text and does not include
Suggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
VALVE AND HYDRANT PRICE BOOK
VALVE AND HYDRANT PRICE BOOK HTTP://WWW.CLOWVALVE.COM EFFECTIVE DATE February 10, 2012 CLOW VALVE COMPANY 902 SOUTH SECOND ST. OSKALOOSA, IA 52577 PH# 800-829-2569 FAX# 641-673-8269 CLOW VALVE COMPANY
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
A. Valves and specialties including necessary accessories indicated on drawings and specified in this section.
SECTION 15081 - VALVES AND SPECIALTIES (HVAC) PART - 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
UNITED BRASS WORKS, INC. 714 S. Main St., Randleman, NC Tel: Fax:
Model 44SS Whistle Valve Quick-Opening Self-Closing Globe Valve With Yoke & Lever Built-In Strainer Screen 150WSP 400 WOG 1 O-Ring FKM (Viton) 2 Lever Bronze 3 Stem Stainless Steel 4 Clevis Pin Steel 5
CONTENTS. Bronze Ball Valve (Threaded) 1. Bronze NRS Gate Valve (Threaded) 2. Bronze RS Gate Valve (Threaded) 3. Bronze Swing Check Valve (Threaded) 4
CONTENTS Bronze Ball Valve (Threaded) 1 Bronze NRS Gate Valve (Threaded) 2 Bronze RS Gate Valve (Threaded) 3 Bronze Swing Check Valve (Threaded) 4 Bronze Globe Valve (Threaded) 5 Bronze Y - Strainer (Threaded)
ND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
May 2nd, 2008 LIST PRICE GUIDE. Please use in conjunction with our catalog below: WATERWORKS & IRRIGATION 2004 Catalog.
May 2nd, 2008 LIST PRICE Please use in conjunction with our catalog below: 2004 Catalog www.matco-norca.com COMMITTED TO QUALITY Visit Our Website: www.matco-norca.com e-mail: mail@matco-norca.com 2008
CITY OF TAMPA ADDENDUM 2. July 13, Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
CITY OF TAMPA Bob Buckhorn, Mayor CONTRACT ADMINISTRATION DEPARTMENT Michael W. Chucran, Director ADDENDUM 2 July 13, 2017 Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
O IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES
O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves
Aloyco. Corrosion Resistant Valves. The First Name In Corrosion Resistant Valves
loyco Corrosion Resistant s The First Name In Corrosion Resistant s Stainless Steel s General Index Figure No. Type Pressure Class End Connection Material vailable Size Range Catalog Page 0 Gate, RS 00
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
SECTION VALVES
Buchtel/Perldns Community LearningCenter GPD -2007271.15 SECTION 15110 VALVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
SUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
CATALOG C-NPS-0812 AHEAD OF THE FLOW. NIBCO Press System
CATALOG C-NPS-0812 AHEAD OF THE FLOW NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
Fire Protection Valves
Fire Protection Valves 1002 C O N T E N T S Terms and Conditions - Page 30 Angle Valves... 7-9 Ball Valves... 1-3 Ball Drip Valves...18 Check Valves, Grooved (Ductile)... 29 Check Valves, Screwed (Ductile)...28
CAST IRON VALVES CATALOG
CAST IRON VALVES CATALOG www.walworthvalves.com INDEX INTRODUCTION WALWORTH ENGINEERING CONTROL... 5 WALWORTH QUALITY SYSTEM... 5 QUALITY CONTROL EQUIPMENT... 9 CAST IRON GATE, GLOBE & SWING CHECK VALVES