516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
|
|
|
- Vanessa Townsend
- 5 years ago
- Views:
Transcription
1 Date Printed: November 2010
2
3 FIRE HYDRANTS
4 or Tyton (6"),6, or 8"
5
6
7
8 A
9
10
11
12
13 EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI
14
15
16
17
18
19 Note: Discontinued For Reference Only
20
21
22
23
24
25
26
27 350 PSI Working Pressure
28
29
30 C509 RW VALVES
31 MODEL 2639 AWWA C509 FULL BODY DUCTILE IRON MODEL 2640 AWWA C509 FULL BODY GRAY IRON
32 MODEL 2639 & Copper Alloy Copper Alloy Copper Alloy Copper Alloy Copper Alloy 304 Stainless Steel 304 Stainless Steel Copper Alloy 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel Copper Alloy 304 Stainless Steel Copper Alloy Copper Alloy Copper Alloy
33 MODEL 2639 & 2640 Copper Alloy Copper Alloy Copper Alloy 2640 Copper Alloy Copper Alloy Copper Alloy 2639 Copper Alloy 304 Stainless Steel 304 Stainless Steel Copper Alloy Copper Alloy 304 Stainless Steel 304 Stainless Steel Copper Alloy Copper Alloy Copper Alloy
34 F-6136 MODEL 2639 & 2640
35 2640 MODEL 2639 &
36 2"-12" R/W VALVE N.R.S. ASSEMBLY MATERIAL LIST
37 MODEL 2639 & 2640
38 MODEL 2639 & 2640 F-6100
39 MODEL 2639 & 2640 F-6106
40 MODEL 2639 & 2640 F-6114
41 MODEL 2639 & 2640 F-6112
42 MODEL 2639 & 2640 F-6113
43 MODEL 2639 & 2640 F-6110
44 4"-12" R/W MECHANICAL CUTTING-IN JOINT (MCJ) ENDS GENERAL DIMENSIONS MODEL 2639 & 2640 F-6111
45 MODEL 2639 & 2640 D F E B A
46 MODEL 2639 & 2640 F-6103
47 MODEL 2639
48 MODEL 2639
49 (EPDM) (EPDM)
50 Copper Alloy Copper Alloy
51 MODEL 2639 & 2640
52 MODEL 2639 & 2640
53 MODEL 2639 & 2640
54
55
56 MODEL 2639 & 2640
57 MODEL 2639 & 2640 Valves shall conform to the latest revision of AWWA Standard C-509 covering resilient wedge gate valves. The valves shall be either, non-rising stem or rising stem, opening by turning stem left or right and provided with 2 square operating nut or handwheel with the word Open and an Arrow cast in the metal to indicate direction to open. The wedge shall be of cast iron completely encapsulated with rubber. The sealing rubber shall be permanently bonded to the cast iron wedge to meet ASTM tests for rubber metal bond ASTM D429 Stems for NRS assemblies shall be cast copper alloy with integral collars in full compliance with AWWA. OS & Y stems shall be copper alloy. The NRS stem stuffing box shall be the o-ring seal type with two o-rings located above thrust collar and one o-ring below. The two o-rings above the thrust collar shall be replaceable with valve fully open and subjected to full rated working pressure. There shall be two low torque thrust bearings located above and below the stem collar. The stem nut shall be independent of wedge and shall be made of solid copper alloy. There shall be a smooth unobstructed waterway free of all pockets, cavities and depressions in the seat area. The body and bonnet shall be coated with fusion bonded epoxy both interior and exterior, complying with AWWA C550 and be NSF 61 certified. Each valve shall have maker s name, pressure rating and year in which manufactured cast on the body. Prior to shipment from factory, each valve shall be tested by hydrostatic pressure equal to requirement for both AWWA (twice the specified working pressure) and 400 PSI ULFM requirements.
58 C515 RW VALVES
59 MODEL 2638 AWWA C515 REDUCED WALL DUCTILE IRON NOTE: It is recommended that valves be installed with stems vertical when used in raw sewage or sludge applications or in water with excessive sediment.
60 4"-12" R/W VALVE NRS ASSEMBLY EXPLOSION MODEL 2638
61 MODEL 2638
62 MODEL 2638 F-6102
63 MODEL 2638 F-6100
64 MODEL 2638 F-6106
65 MODEL 2638 F-6114
66
67 MODEL 2638 F-6111
68 4"-12" MODEL 2638 F-6110
69 MODEL 2638
70 MODEL 2638
71 MODEL 2638 R-2 R-1 R-5 R-3 R4 & 4A R-7 R-11 R-8 R-8 R-9 R-13 R-12 R-6 R-14 R-15 R-16
72 MODEL 2638 F-6136
73 MODEL 2638
74 MODEL 2638
75 14"-16" R/W VALVE NRS ASSEMBLY MATERIAL LIST MODEL 2638
76
77
78 14"-16" R/W VALVE FLANGED ENDS GENERAL DIMENSION MODEL 2638 F-6102
79
80
81 14"-16" R/W VALVE MJ ENDS GENERAL DIMENSION MODEL 2638 F-6100
82
83
84 14"-16" MODEL 2638 F-6106
85
86
87 14"-16" R/W VALVE MJ TAPPING GENERAL DIMENSION MODEL 2638 F-6114
88
89
90
91 14"-16" R/W OS&Y VALVE FLANGED END GENERAL DEMINSIONS
92
93 Complies with applicable requirements of AWWA C515
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130 4"-16" R/W VALVE UL/FM Performance Information MODEL ", 10", 12", 14", and 16" valve sizes have been hydrostatically shell tested at four (4) times the rated pressure (800)psi).
131 MODEL 2638
132 14"-48" R/W VALVE AWWA SERVICE Performance Information MODEL 2638 NOTE: It is recommended that valves be installed with stems vertical when used in raw sewage or sludge applications or in water with excessive sediment.
133 MODEL 2638 NOTE: It is recommended that valves be installed with stems vertical when used in raw sewage or sludge applications or in water with excessive sediment.
134
135 DOUBLE DISC GATE VALVES
136 * Note: Call Factory For Special Applications and Accessory Availability. 42" & 48" Drawings Available on Request
137
138
139
140
141
142
143
144
145 MODEL 2613
146 MODEL 2613
147 MODEL 2613
148
149
150
151 FLANGES ARE FACED AND DRILLED TO CLASS 250 STANDARD NOTE: 36, 42, AND 48 DIMENSIONS CONTACT FACTORY
152
153
154
155 BUTTERFLY VALVES
156
157
158
159
160 SUB-ASSEMBLY 4-12 BFV ROUND SHAFT STYLE 4500 MECHANICAL JOINT ENDS
161 SUB-ASSEMBLY 4-12 BFV ROUND SHAFT STYLE 4500 WAFER STYLE
162 SUB-ASSEMBLY 4-12 BFV ROUND SHAFT STYLE 4500 FLANGED ENDS
163 14-24 STYLE 4500 SUB-ASSEMBLY-BFV (ROUND SHAFT) MECHANICAL JOINT
164 14-24 SUB-ASSEMBLY-BFV (ROUND SHAFT) FLANGED END
165
166
167
168
169 ASSEMBLY-STYLE 4500 SERIES FLANGED BUTTERFLY VALVE W/HANDWHEEL OPERATOR EXTENDED BONNET
170
171
172 ASSEMBLY-STYLE 4500 SERIES MECHANICAL JOINT BUTTERFLY VALVE W/BURIED OPERATOR EXTENDED BONNET
173
174
175
176
177
178
179
180
181
182 SUB-ASSEMBLY 4350 MANUAL OPERATORS FOR STYLE 1450 BUTTERFLY VALVE
183 SUB-ASSEMBLY 2200 MANUAL OPERATORS FOR STYLE 1450 BUTTERFLY VALVE
184
185 SUB-ASSEMBLY STYLE 1450 MECHANICAL JOINT END BUTTERFLY VALVE (NON-ADJUSTABLE PACKING)
186
187 ASSEMBLY STYLE 1450 FLANGED BUTTERFLY VALVE WITH HANDWHEEL OPERATOR EXTENDED BONNET
188 ASSEMBLY STYLE 1450 MECHANICAL JOINT BUTTERFLY VALVE WITH BURIED OPERATOR EXTENDED BONNET
189
190
191
192
193 CLOW BUTTERFLY VALVES CLASS 250
194 SUB-ASSEMBLY MANUAL OPERATOR
195 SUB-ASSEMBLY 4-12 BFV STYLE 4500-FLANGE ENDS-CLASS 250
196 SUB-ASSEMBLY BFV STYLE 4500-FLANGE ENDS-CLASS 250
197 SUB-ASSEMBLY 4-12 BFV STYLE 4500-MECHANICAL JOINT-CLASS 250
198 SUB-ASSEMBLY BFV STYLE 4500-MECHANICAL JOINT-CLASS 250
199 ASSEMBLY-STYLE BFV FLANGED END-CLASS 250 W/HANDWHEEL OPR.
200 ASSEMBLY-STYLE BFV FLANGED END-CLASS 250 W/BURIED OPR.
201 ASSEMBLY-STYLE BFV MECHANICAL JOINT-CLASS 250 W/BURIED OPR.
202 CLOW BUTTERFLY VALVE AWWA CLASS 250-B SUGGESTED SPECIFICATIONS 4 THROUGH 24
203 CLASS 250-B CLOW BUTTERFLY VALVE LARGE DIAMETER AWWA CLASS 250-B
204 ASSEMBLY MANUAL OPERATOR
205 ASSEMBLY MANUAL OPERATOR MODEL 4350
206 SUB-ASSEMBLY CLASS 250 FLANGED END BFV
207 SUB-ASSEMBLY-CLASS 250 MECHANICAL JOINT ENDS BFV
208 ASSEMBLY-STYLE BFV CLASS 250 FLANGE END HANDWHEEL OPR.
209 ASSEMBLY-STYLE BFV CLASS 250 FLANGE END HANDWHEEL OPR.
210 ASSEMBLY-STYLE BFV CLASS 250 FLANGE END BURIED OPR.
211 ASSEMBLY-STYLE BFV CLASS 250 FLANGE END BURIED OPR.
212 ASSEMBLY-STYLE BFV CLASS 250 MECHANICAL JOINT BURIED OPR.
213 ASSEMBLY-STYLE BFV CLASS 250 MECHANICAL JOINT BURIED OPR.
214 CLOW BUTTERFLY VALVE AWWA CLASS 250 B SUGGESTED SPECIFICATIONS 30 THROUGH 48
215 FLOOR/BENCH STANDS
216 FLOOR STAND ASSEMBLY W/HANDWHEEL OPERATOR CLOW VALVE COMPANY The F-5500-T Floor stand is for use on non-rising stem valves. Floor stands are of high strength cast iron and may be provided with extension stems of steel, stainless steel or bronze as specified.
217 NON-RISING INDICATING FLOOR STAND CLOW VALVE COMPANY The F-5505-T indicating floor stand is for use on non-rising stem valves where open/close valve indication is needed. Floor stands are of high strength cast iron and may be provided with extension stems of steel, stainless steel or bronze as specified.
218 EXTENSION STEM ASSEMBLY 2" SQ. SOCKET COUPLING CLOW VALVE COMPANY Extension Stems Valve extension stems are available in steel, stainless steel, or bronze and are provided with a 2" square nut or handwheel as specified. Extension stems are available for use with Mud valves, Gate valves, Butterfly valves, Eccentric plug valves, etc. All components are jig drilled for interchangeability. When ordering extension stem state length and give distance from bottom face of flange to top of handwheel or nut, or to base of floor stand.
219 SIZE 3, 5, & 6 - STEM GUIDE GENERAL DIMENSIONS CLOW VALVE COMPANY
220 SIZE 3, 5, & 6 STEM GUIDES PARTS LIST CLOW VALVE COMPANY F-5660-T Stem Guides Stem Guides are installed as wall brackets to support extension stems. They are fully adjustable and are made of high strength ductile iron. The guide is bronze bushed where the extension stem passes through. They should be installed at a height which does not permit the stem to be unsupported through a length of more than 10 feet. Stem Guides are available in three sizes. When ordering state distance from center line of operating stem to face of wall, or give the size number as shown in table.
221 FLOOR BOX - PARTS LIST AND DIMENSIONS CLOW VALVE COMPANY The F-5695-T Floor Box Floor boxes are designed for use with non-rising stem valves. Installed in concrete floors or slabs they provide support for the extension stem and a cover for the operating nut on the stem. Available in 8", 10", and 12" lengths.
222 CHAIN WHEEL DIMENSIONS CLOW VALVE COMPANY F-5680 Chain Wheels Chain Wheels are normally used for operation of valves located overhead. They are provided with chain guides to prevent the chain from slipping off the wheel. Chains can be furnished rust proofed if specified. Chain Wheels are mounted directly on the handwheel, and are of aproximately the same diameter. In ordering please state distance from floor to center line of wheel, or give the exact number of feet of chain required.
223 TAPPING VALVES AND SLEEVES
224
225
226 ECCENTRIC PLUG VALVES
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248 Standard valves are tested to rated working pressure in standard flow direction and 35 psi in reverse flow direction.
249
250
251 # TURNS # TURNS # TURNS
252
253
254
255 HORIZONTAL SWING CHECK VALVE
256
257 Part. No. Qty. Description Material &ASTM Spec. 1A With 1AB (O-Ring) 2 1 for LS/W Side Plug With O-Ring Bronze 2A * See foot note Cap Bolts ss-18-8astm F593C 3A 1 O-Ring Syn. Rubber 4A 1 Cap C.I.A-126 CI.B 5A 1 Body C.I.A-126 CI.B 6A 1 Hinge Pin SS A-276 (304) 7AA 1 Hinge Bronze (2"-3") D.I. A-536 (4"-12") 7AB 1 Hinge w/keyway for LS/LW Bronze (2"-3") D.I. A-536 (4"-12") 8AA 1 Disc Bolt (4"-12") Bronze (10"-12") Steel (4"-8") 8AB 1 Disc Bolt (4"-12") Bronze (10"-12") Steel (4"-8") 9AA 2 Disc Bolt O-Ring (4"-12" 1106A, 8" ) Syn. Rubber 9AB 2 Disc Bolt Gasket (4" & 8" 1106) 10A 1 Disc Holder Bronze (2"-3") C.I.A-126 CI.B (4"-12") 11A 1 Disc Plate Bronze Part. No. Qty. Description Material &ASTM Spec. 12AA 1 Disc Nitrile (Buna N) Rubber 12AB 1 Disc Bronze (2"-3") C.I.A-126 CI.B (4"-12") 13A 1 2 w/resilient disc (2"-3") Disc Nut SS18-8 ASTM F593C 14AA 1 Disc Ring (4"-12") Bronze 15A 1 Seat Ring Bronze 16A 1 Spring Steel 17A 1 Extended Hinge Pin for LS/LW SS A-276 (304) 18A 2 Key for LS/LW SS A-276 (304) 19A 1 Set Screw Steel 20AA 1 Lever Arm for LS Steel 20AB 1 Lever Arm for LW Steel 21A 1 Bracket Steel 22A 2 Hex Head Bracket Bolt Steel 23A 1 Eye Bolt w/2 Hex Nuts Steel 24A 1 Stuffing Box Bronze 25A Packing Graphite Filled 26A 1 Gland Bronze 27A 1 Weight C.I.A-126 CI.B 28A 1 Set Screw Steel
258 FIG. 1106LW SHOWN. SAME DIMENSIONS APPLY TO 1106 AND 1106LS DETAIL LW/LS L BOLT CIRCLE DIA. END FLANGES M NO. OF BOLTS PER FLAT END FLANGES N BOLT HOLE DIA. END FLANGES CONFORM TO ANS1 B16.1
259 HORIZONTAL SWING CHECK VALVE FLANGED ENDS-RUBBER FACED
260 HORIZONTAL SWING CHECK VALVE FLANGED ENDS-RUBBER FACED
261 HORIZONTAL SWING CHECK VALVES 4-30 FLANGED ENDS, CUSHION CHECK
262
263
264 HORIZONTAL SWING CHECK VALVE FLANGED ENDS-CUSHION CHECK
265 HORIZONTAL SWING CHECK VALVE FLANGED ENDS-CUSHION CHECK
266 CLOW INCREASING HORIZONTAL SWING CHECK VALVE FLANGED END-RUBBER SEAT
267 INCREASING HORIZONTAL SWING CHECK VALVE RUBBER SEAT PLAIN TYPE PARTS LIST STYLE 306 A
268 STYLE 306 A
269 INCREASING HORIZONTAL SWING CHECK VALVE RUBBER SEAT WEIGHT & PART LIST STYLE 306 AL
270
271 INCREASING HORIZONTAL SWING CHECK VALVES VALVES RUBBER SEAT OUTSIDE LEVER AND SPRING PARTS LIST STYLE 306 AS
272
273
274
275 STYLE 506 AS KENFLEX RESILENT HINGED CHECK VALVE
276 PRESSURE RELIEF VALVE FLOOR/WALL
277 CLOW FLOOR TYPE PRESSURE RELIEF VALVE CLOW VALVE COMPANY & 6" 4" x 8" 6" x 8" A MACHINED BRONZE SEAT. 6. THE 8" LONG CAST IRON BODY IS DESIGNED TO BE EXTENDED TO ANY LENGTH BY USING C900 PVC PIPE AND FIELD CUTTING TO DESIRED LENGTH.
278 FLOOR TYPE PRESSURE RELIEF VALVES PARTS LIST CLOW VALVE COMPANY
279 FLOOR TYPE PRESSURE RELIEF VALVES DIMENSIONS CLOW VALVE COMPANY
280 SUGGESTED SPECIFICATIONS CLOW 4" & 6" FLOOR TYPE PRESSURE RELIEF VALVES CLOW VALVE COMPANY BUNA-N a machined bronze seat in the body. valve (F-1493-T) furnished
281 INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS F-1493-T FLOOR TYPE PRESSURE RELIEF VALVE CLOW VALVE COMPANY
282 CLOW WALL TYPE PRESSURE RELIEF VALVE CLOW VALVE COMPANY F-1494-T 4" x 12" 6" x 12" NOTE: The 12" long cast iron wall thimble is designed to be extended to any length by using C900 pvc pipe and field cutting to desired length.
283 FLAP VALVE - WALL PRESSURE RELIEF 4" & 6" DIMENSIONS & PARTS CLOW VALVE COMPANY
284 WALL THIMBLE - PARTS LIST AND DIMENSIONS CLOW VALVE COMPANY F-1496-T
285 SUGGESTED SPECIFICATIONS CLOW 4" WALL TYPE PRESSURE RELIEF VALVES CLOW VALVE COMPANY o 10 offset The hinge pin shall be furnished in stainless steel. as furnished by Clow Valve or
286 INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS F1494-T WALL TYPE PRESSURE RELIEF VALVES CLOW VALVE COMPANY
287 INDICATOR POST
288
289
290
291
292
293
294
295
296 WALL STYLE INDICATOR POST F-5765
297 FLAP-SHEAR GATE VALVE
298 CLOW FLAP VALVES, IBBM CLOW VALVE COMPANY
299 FLAP VALVE - FLANGE PARTS LIST CLOW VALVE COMPANY
300 FLAP VALVE - FLANGE GENERAL DIMENSIONS CLOW VALVE COMPANY
301 SUGGESTED SPECIFICATIONS CLOW FLAP VALVES CLOW VALVE COMPANY The valve shall be constructed with a 10º offset from vertical to ensure positive closure. The flange shall be drilled using an ANSI 125 pound template. Valves shall be as furnished by Clow Valve (F-3012-T) or approved equal.
302 INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS T-3012-T FLAP VALVES CLOW VALVE COMPANY * Food grade grease similar to Mystik FG-2.
303 CLOW SHEAR GATES, IBBM CLOW VALVE COMPANY
304 SHEAR GATE - FLANGE END SINGLE WEDGE CLOW VALVE COMPANY
305 SHEAR GATE - FLANGE END SINGLE WEDGE CLOW VALVE COMPANY
306 SUGGESTED SPECIFICATIONS CLOW SHEAR GATES CLOW VALVE COMPANY Lift rods are used to manually raise and lower the Shear Gate disc from a position above the gate. A cast iron catch hook may be adjusted on the lift rod to allow the rod to be hung on a hanger placed in the wall. Lift rod material is 3/4" dia. carbon steel. Catch and loop handle are cast iron. Lift rods may be made to specified length in 6" increments.
307 INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS F-3000-T SHEAR GATES CLOW VALVE COMPANY
308
309
310 MUD VALVES
311 CLOW MUD VALVES, IBBM CLOW VALVE COMPANY Mud valves are recommended for use in applications with low seating or unseating pressures only.
312 RESILIENT SEATED MUD VALVE - RISING & NON-RISING STEMS CLOW VALVE COMPANY
313 RESILIENT SEATED MUD VALVE - RISING & NON-RISING STEMS CLOW VALVE COMPANY
314 SUGGESTED SPECIFICATIONS CLOW MUD VALVES CLOW VALVE COMPANY The Mud valve shall be of the heavy duty flanged type designed to provide a positive seal under both seating and unseating head conditions. The Valve shall be (non rising) (rising) stem style as detailed on the schedule or the plans. The seat ring shall be bronze with a tapered, accurately machined seating face. The plug seat shall be a seamless molded ring of BUNA-N tapered to accurately mate with the seat ring to form a positive seal. Mud valves shall be F-3075-T non-rising stem design or F-3085-T rising stem design as furnished by Clow Valve or approved equal.
315 INSTALLATION, OPERATION AND MAINTENANCE MANUAL F3075-T/F3085-T CLOW MUD (PLUG) VALVES CLOW VALVE COMPANY * Food grade grease similar to Mystik FG-2.
316 UL/FM
317
318 (REF. ONLY)
319
320
321
322 WORKING PRESSURE: 150 PSI
323
324
325
326 NOTES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service.
KENNEDY KENNEDY VALVE MODEL VALVE KS-RW 1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service. 2. The valves shall have a cast
AUTOMATION ACCESSORIES IN-PLANT VALVE PRODUCTS EXTENSION STEMS FLOORBOX STEM GUIDES FLOORSTANDS COMMITTED TO ENVIRONMENTAL RESPONSIBILITY FLAP VALVES
INCREASING SWING CHECK VALVES FLAP VALVES SWING CHECK VALVES AUTOMATION ACTUATION CLOW VALVE has furnished valves with many assorted types of motorized to operate our valves. The gate valves use multi-turn,
Suggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
VALVE AND HYDRANT PRICE BOOK
VALVE AND HYDRANT PRICE BOOK HTTP://WWW.CLOWVALVE.COM EFFECTIVE DATE February 10, 2012 CLOW VALVE COMPANY 902 SOUTH SECOND ST. OSKALOOSA, IA 52577 PH# 800-829-2569 FAX# 641-673-8269 CLOW VALVE COMPANY
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
GENERAL FEATURES / SPEC M&H AWWA C502 FIRE HYDRANTS Style 929 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approval Type: Compression type, opening against line pressure.
Series 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
Approved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
SECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
American Flow control Series 2500
American Flow control 14-66 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Lifting DEVICES 14-66 Valve is constructed of high-strength
MEDALLION HYDRANT. clowvalve.com AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
clowvalve.com MEDALLION HYDRANT AWWA C50 UL LISTED FM APPROVED NSF 6/37 CERTIFIED 50 PSI WORKING PRESSURE 0-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane, Inc. MEDALLION HYDRANT FIRE PROTECTION
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE CONSTRUCTION STAINLESS STEEL PIPE PLUG Allows installation of pressure gauge. STAINLESS STEEL FASTENERS Helps provide corrosion resistance.
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
ECCENTRIC PLUG VALVES
Serving the Water & Waste Water Industry Since 1878 ECCENTRIC PLUG VALVES C517 3 24 sizes available Multiple end connections available M&H Valve is a division of McWane, Inc. www.mh-valve.com AVAILABLE
The SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
ADMIRAL HYDRANT. clowvalve.com
clowvalve.com ADMIRAL HYDRANT AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 350 PSI WORKING PRESSURE AVAILABLE 10-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane,
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
SWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
BUTTERFLY VALVES KENNEDY 140 YEARS AWWA C504 CLASS 150B & 250B CERTIFICATIONS ISO 9001 ISO BS OHSAS
KENNEDY BUTTERFLY S CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C504 CLASS 150B & 250B STYLE 4500 3-24 STYLE 1450 30-54 CONSULT KENNEDY FOR SIZES LARGER THAN 54 INCHES. 140 YEARS WWW.KENNEDY.COM
For Underground Applications Now, with Kennedy Valve Butterfly Valves, you gain new valve reliability plus economy "-24" NSF Certified
For Underground Applications Now, with Kennedy Valve Butterfly Valves, you gain new valve reliability plus economy 4500 4"-24" NSF Certified Kennedy Valve 4500 AWWA Butterfly valves The Kennedy Valve Butterfly
AWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
Water Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
visit us online at
PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves
BS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
American Flow control 5 1/4 B-62-B-5
American Flow control 5 1/4 B-62-B-5 Fire Hydrant FLOW CONTROL Construction Fully complies with AWWA C502 and is available UL Listed and FM Approved in applicable configurations. one-piece bronze OPERATING
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
AMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available Listed by Underwriters Laboratories, Inc. and Approved by FM Approvals in applicable configurations.
M&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
Water Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
5 1/4 AMERICAN-DARLING B-84-B-5 FIRE HYDRANT BY AMERICAN FLOW CONTROL
5 1/4 AMERICAN-DARLING B-84-B-5 FIRE HYDRANT BY AMERICAN FLOW CONTROL CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and FM Approved in applicable configurations. ONE-PIECE
American Flow control 5 1/4 b-84-b-5
American Flow control 5 1/4 b-84-b-5 Fire Hydrant FLOW CONTROL Construction Fully complies with AWWA C502 and is available UL Listed and FM Approved in applicable configurations. one-piece bronze OPERATING
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
September 2012 / M&H C502 / Model 129
GENERAL FEATURES / GENERAL SPEC M&H AWWA C502 FIRE HYDRANTS Model 129 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approved Type: Compression type, opening against line
J & S Valve GATE VALVE AWWA C509. Resilient Seated Solid Wedge Size: 2-12
J & S Valve GATE VALVE Resilient Seated Solid Wedge Size: 2-12 AWWA C509 Resilient Seated Solid Wedge Gate Valve Series 6000 AWWA C509 2 Operating Nut or Hand Wheel Stem Stainless Steel or Bronze Gland
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
M&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
Harlingen Water Works System Approved Products List For Subdivisions. January 11, 2005
Harlingen Water Works System Approved Products List For Subdivisions January 11, 2005 Revised March 24, 2016 Harlingen Water Works System Approved Products List for Subdivisions Table of Contents: 1. Valves
VALVES, FIRE HYDRANTS, AND APPURTENANCES
VALVES, FIRE HYDRANTS, AND APPURTENANCES PART 1 - GENERAL 1.01 SECTION INCLUDES A. Butterfly Valves B. Gate Valves C. Tapping Valve Assemblies D. Fire Hydrant Assemblies E. Flushing Devices (Blowoffs)
AMERICAN FLOW CONTROL 5 1/4 B-62-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-62-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and Approved by FM Approvals in applicable configurations. ONE-PIECE BRONZE
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
SPECIFICATIONS - DETAILED PROVISIONS Section Valve and Gate Operations CONTENTS
SPECIFICATIONS - DETAILED PROVISIONS Section 13446 - Valve and Gate Operations CONTENTS PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 SUBMITTALS... 1 1.04 QUALITY ASSURANCE... 1 1.05
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE STYLE Consult factory for sizes
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
HP250II AND HP250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901
H250II AND H250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS RATT H250II Scope of Line... 1 Design and Construction Details... 1 ipe Mating Chart... 1
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
EXPECT RELIABILITY AVK RESILIENT SEATED GATE VALVES
EXPECT RELIABILITY AVK RESILIENT SEATED GATE VALVES AVK VALVES STANDARD FEATURES AVK STANDARD FEATURES AVK Gate Valves are made of ductile iron and meet or exceed AWWA C509 or C515 ASTM A582 stainless
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION WATER DISTRIBUTION VALVES
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 12 16 WATER DISTRIBUTION VALVES PART 1 GENERAL... 2 1.1 Description... 2 1.2 Reference Specifications, Codes, and
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RUBBER-SEATED BUTTERFLY VALVES 3 INCHES THROUGH 72 INCHES ANSI/AWWA C504 Class 150/250 December 2012
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RUBBER-SEATED BUTTERFLY VALVES 3 INCHES THROUGH 72 INCHES ANSI/AWWA C504 Class December 2012 1. SCOPE This product specification covers class rubber-seated butterfly
OPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE
OPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE INDEX SERIES 2500 DUCTILE IRON RESILIENT WEDGE GATE VALVE OPERATION and MAINTENANCE MANUAL. OPERATION AND MAINTENANCE Operation,
Milliken Valve offers the following for your water and wastewater needs:
Milliken Valve offers the following for your water and wastewater needs: s Series 601/600 Flanged & MJ Series 601S Stainless Steel Series 601RL Rubber Lined Series 602 High Pressure Series 613A Threaded
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
PLUG VALVE we PIPE ( ) Twice the tensile strength of cast iron Greater yield strength than steel
PLUG VALVE ECO-Centric Twice the tensile strength of cast iron Greater yield strength than steel W4.10 Hydrotite Eco-Centric Plug Valve December 2012 0800 we PIPE (93 7473) www.hynds.co.nz Features Ductile
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
DUCTILE IRON & STAINLESS STEEL. FOR WATER & WASTEWATER Treatment Plants
DUCTILE IRON & STAINLESS STEEL FOR WATER & WASTEWATER Treatment Plants About Trumbull Mud Valves Trumbull Industries was established in 1922 in Warren, Ohio (Trumbull County). Manufacturing began in the
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
AGRICULTURAL WATER CONTROL PRODUCTS PRODUCTS AT-A-GLANCE
AGRICULTURAL WATER CONTROL PRODUCTS PRODUCTS AT-A-GLANCE WATER DISTRIBUTION & CONTROL / DRAINAGE CONTROL / IRRIGATION CAST IRON CANAL GATES C-10 & C-20 "RED TOP" SERIES Waterman Canal Gates offer reliable
AWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
Technical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved
Worldwide Contacts www.tyco-fire.com Model TJP Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator General Description TYCO Model TJP Resilient-Seated Gate Valves with Vertical and
SUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
American R/D SOLID WEDGE GATE VALVE C-500 2" THROUGH 96" SERIES 100 SERIES 105 2" Through 96" Ductile IRON Construction Full Waterway AWWA C-500 Rated up to 250 psi 100-LINE SOLID WEDGE GATE VALVE FEATURES
2-6 FIRE HYDRANT---(MODEL ½ & 5 ¼
M&H PDF PAGE INDEX Page PRODUCT 2-6 FIRE HYDRANT---(MODEL 129 4 ½ & 5 ¼ ) 7 How to Order Fire Hydrants 8 FIRE HYDRANT WARRANTY 9-13 FIRE HYDRANT---(MODEL 929 5 ¼ ) 14-18 FIRE HYDRANT---(POST HYDRANT 2
AWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
FIRE PROTECTION PRODUCTS
SUPER CENTURION FIRE HYDRANT Mueller Super Centurion Fire Hydrant Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout North America. There are a number of
ND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
DIMENSIONS (approximate)
Page 1 of 8 a NRS GATES OS&Y GATES company Model 48 Resilient Wedge Gate Valve SPECIFICATION SUBMITTAL SHEET FEATURES Sizes: 2 1/2" 3" 4" 6" 8" 10" 12" Maximum working water pressure 200 PSI Maximum working
A. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Fire Protection Indicator Post
The 813 Series Indicator Post is designed to operate non-rising stem gate valves used in the control of underground water supply for automatic sprinklers, water spray deluge, foam-water deluge, and standpipe
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
AWWA Swing Check Valves
AWWA Swing Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the
AHEAD OF THE FLOW. Butterfly Valves
CATALOG C-BFV-1201 TM AHEAD OF THE FLOW Butterfly Valves General Index Butterfly Valves WARRANTY..........................................4 BUTTERFLY VALVES..................................5-27 OPTIONS
SECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
APCO CVS-250/250A SWING CHECK VALVES
BULLETIN 250 NOVEMBER 2014 APO VS-250/250A SWING EK VALVES Design and onstruction APO VS-250/250A Swing heck Valves are used to prevent the backflow of fluid by closing before flow reversal. They are installed
SERIES 900 PLUG VALVES
K - F L O VA LV E S SERIES 900 PLUG VALVES VA LV E S F R O M 1 4 T H R U 4 8 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 900 SerieS Plug Valve Sizes 14-48 Crispin/K-Flo Series 900 is
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
ISO-DE Double Eccentric Butterfly Valves
ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Heavy welded steel outlet half. 3/4-inch NPT test plug. Benefits
622 Tapping Sleeve Recessed cavity for mating to lip on standard tapping valves per MSS SP60. Heavy welded steel outlet half. 3/4-inch NPT test plug. Roll resistant, self-energizing concave wedge gasket.