KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
|
|
- Audrey Gilbert
- 5 years ago
- Views:
Transcription
1 KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2 " Figure No. Figure No. with Available End Connections & Size Range (STD) Post Plate 7702SS Accessories (per AWWA C509 dimensions) Kennedy Valve/KS-RW
2 11 C C A Class Stainless Steel A F593/F594 Stuffing Box A Class ASTM A536 Grade Stuffing Box O-Ring/gasket C/F594 Grade Grade (EPDM Encapsulated) Ductile Iron ASTM A536 Grade Grade
3 2" - 12" R/S GATE VALVE NRS ASSEMBLY EXPLOSION ITEM NO. QTY. DESCRIPTION MATERIAL ASTM SPEC. C C A ass ASTM A D.I. EPDM COATED 5- Kennedy Valve/KS-RW 515
4 2" - 12" R/S VALVE OS&Y MATERIAL LIST ITEM DESCRIPTION MATERIAL ASTM SPEC. A Class Grade Nylatron rade C.I. EPDM Coated Class ASTM A Kennedy Valve/KS-RW
5 ITEM QTY. DESCRIPTION MATERIAL 1 1 Hand wheel Hold Down Nut Bronze 2 1 Top Stem Nut Bronze 3 1 Hand wheel Gray Iron 4 4 Cover Bolts & Nuts (Sizes 2 thru 6 ) Zinc Plated Steel 4 8 Cover Bolts & Nuts (Sizes 8 thru 12 ) Zinc Plated Steel 5 1 Packing Gland Ductile Iron 6 1 Stem O-Ring Buna N 7 1 Packing Lubricated Fiber 8 1 Thrust Washer Bearing Nylatron 9 2 Thrust Washer (1 only on 2 4 ) Bronze 10 1 Stem B 11 2 Packing Bolts Zinc Plated Steel 12 2 Packing Bolt Nuts Brass 13 1 Cover O-Ring Buna N 14 1 Stem Head Bronze 15 1 Wedge D.I. EPDM Coated 16 1 Body all types Ductile Iron 17 1 Pipe Plug 1/2 : 2 1/ /4 : 6 12 Galvanized Steel 18 1 Cover Ductile Iron KENNEDY VALVE MODEL KS- W
6 2" - 12" R/S VALVE NRS FLANGED ENDS GENERAL DIMENSIONS 7561ASS W/HANDWHEEL 7561ANSS W/NUT 7701ASS W/POST PLATE (3-12") Standard Tap Sizes 1/2" NPT - 2 1/2" - 4" 3/4" NPT - 6" - 12" ALL FLANGE VALVES ARE TAPPED & POSITION "A" VALVE SIZE * A B C D E F G H inch mm inch mm inch mm inch mm inch mm inch mm # inch mm inch mm inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /4 310 Kennedy Valve/KS-RW
7 KENNEDY VALVE MODEL KS- W Complies with applicable requirements of AWWA C5 STD. TAP SIZE 1/2": 2 1/2"-4" 3/4": 6"-12" * /2 6 11/ /8 7 1/4 N/A 2 1/2 7 1/2 3 3/4 7 11/ /8 16 3/8 4 5/8 7 1/ /2 3/4 15 5/8 18 7/8 4 5/ /2 9 15/ /4 22 3/4 8 5/ /2 5 1/ /4 30 1/8 8 3/ /2 5 3/4 13 1/2 1 1/8 29 1/4 37 3/4 8 3/ / / /8 45 3/4 12 7/ /4 40 5/8 53 1/8 12 7/ ALL FLANGE VALVES TAPPED & POSITION "A"
8 2 1/2" - 8" R/S VALVE FLANGE x GROOVE OS&Y GENERAL DIMENSIONS 7092ABF GRV X FLG VALVES TAPPED & POSITION A, "B", "F" VALVE SIZE A B C D E F G VALVE 2 1/2 7 1/2 A 3 3/4 B 7 1/4 C 13 7/8 D 16 3/8 E 2 1/2 F 3 3/4 G SIZE 3 2 1/ / / /4 15 5/8 13 7/8 18 7/8 16 3/ / / / /4 15 5/8 22 3/4 18 7/8 4 1/ / / /4 22 3/4 4 1/4 4 1/ /2 10 1/2 5 1/45 1/ /4 23 3/4 30 1/8 30 1/8 6 1/46 1/4 5 1/45 1/ /2 11 1/2 5 3/45 3/ /4 29 1/4 37 3/4 37 ¾ 8 1/48 1/4 5 3/45 3/ / /8 45 3/4 10 1/4 6 1/2 Kennedy Valve/KS-RW
9 2 1/2" - 8" R/S VALVE GROOVE ENDS OS&Y GENERAL DIMENSIONS 7093A GRV X GRV VALVES TAPPED & POSITION A, "B", "F" VALVE SIZE A B C D E F VALVE 2 1/2 A 7 1/2 B 3 3/4 C 1.97 D 7 1/4 E 13 7/8 F SIZE 16 3/8 2 1/23 7 1/28 3 3/ / /8 15 5/ /87/ /8 18 7/ / /4 22 3/ / /4 22 3/ /2 1/2 5 1/4 5 1/ /4 23 3/ /8 1/ /2 5 3/ /4 37 ¾ /2 5 3/ /4 37 3/ / /8 45 3/4 5- Kennedy Valve/KS-RW 515
10 2"-12" R/S VALVE MECHANICAL JOINT ENDS GENERAL DIMENSIONS 7571SS STANDARD 7071SS W/POST PLATE (3-12") VALVE SIZE A B C D E F G H 2 8 1/4 4 1/8 2 1/2 4 1/2 10 7/8 2 5/8 7 1/ / /2 4 1/4 2 1/2 7 3/4 12 3/8 4 5/ /2 4 3/4 2 1/2 9 1/8 14 3/4 4 3/ / /2 5 1/4 2 1/2 11 1/ / / /8 6 9/16 2 1/2 13 3/4 22 1/2 6 3/ / /2 7 3/4 2 1/2 15 3/4 26 1/2 8 3/ / / / /4 Kennedy Valve/KS-RW
11 3"-12" R/S VALVE NRS FLANGED X MECHANICAL JOINT ENDS GENERAL DIMENSIONS 7572SS STANDARD 7702SS W/POST PLATE VALVE SIZE A B C D E F 3 8 1/ / / /4 4 1/2 4 3/ /4 4 1/ /2 5 1/4 5 1/ / /16 5 3/4 6 9/ /2 8 1/ /4 6 1/2 7 3/ /2 10 1/ /4 5-1 Kennedy Valve/KS-RW 515
12 4"-12" R/S VALVE TYTON ENDS NRS GENERAL DIMENSIONS 7901SS STANDARD 7901PSS W/POST PLATE per ANSI/AWWA C111/A21.11 VALVE SIZE A B C D E F G /4 6 5/ / / /4 7 3/ / /8 8 9/ / / /8 9 11/ / / /8 10 7/ /8 Kennedy Valve/KS-RW
13 4"-12" R/S VALVE NRS FLANGEx TYTON ENDS GENERAL DIMENSIONS 7902SS STANDARD 7902PSS W/POST PLATE VALVE SIZE A B C D E F 3 8 1/ / / /8 4 1/2 6 5/ /4 4 1/ /8 5 1/4 7 3/ / /16 5 3/4 8 9/ /2 8 1/ /16 6 1/2 9 11/ /2 10 1/ / / /4 5-1 Kennedy Valve/KS-RW 515
14 2"-12" R/S VALVE PVC ENDS NRS GENERAL DIMENSIONS 7597SS STANDARD 7597PSS W/POST PLATE (3-8") VALVE SIZE A B C D E /2 10 7/8 7 1/4 2 1/2 10 3/4 5 3/8 3 3/4 11 3/8 7 1/ /8 5 13/16 4 1/6 12 3/ /2 6 3/4 4 1/2 14 3/ /4 7 7/8 5 3/ /4 8 1/8 5 3/8 22 1/2 14 Kennedy Valve/KS-RW
15 2"-12" R/S VALVE MECHANICAL CUT JOINT ENDS GENERAL DIMENSIONS 7576SS STANDARD 7576PSS W/POST PLATE VALVE SIZE A B C D E F G H J 4 9 1/2 4 3/4 2 1/2 9 1/8 14 3/4 4 3/ /2 5 1/4 2 1/2 11 1/ / /8 6 9/16 2 1/2 13 3/4 22 1/2 6 3/ /2 7 3/4 2 1/2 15 3/4 26 1/2 8 3/ / / Kennedy Valve/KS-RW 515
16 2"-3" R/S VALVE THREADED ENDS NRS GENERAL DIMENSIONS 7057SS 2" NUT 7057WSS HANDWHEEL VALVE SIZE A B C D E 2 5 1/4 4 1/8 3 9/ /8 7 1/4 2 1/ /16 4 1/2 11 3/8 7 1/ /8 5 5/8 4 7/8 12 3/8 10 Kennedy Valve/KS-RW
17 3" 12" R/S VALVE NRS TAP x MECHANICAL JOINT ENDS GENERAL DIMENSIONS 7950SS STANDARD 7950PSS W/POST PLATE VALVE SIZE A B C D E F G 4 9 1/4 4 1/2 4 3/ /4 3/16 4 1/ /2 5 1/4 5 1/ /4 6 1/ /4 5 3/4 7 1/ /2 1/4 8 1/ /4 6 1/2 7 3/ /2 1/4 10 1/ /4 12 1/4 5-1 Kennedy Valve/KS-RW 515
18 GRV X FLG VALVES TAPPED & POSITION A, "B", "F" VALVE SIZE VALVE A A B B C C D D E E F F SIZE 2 1/2 7 1/2 3 3/4 7 1/4 10 7/8 3 3/4 2 1/2 2 1/2 7 1/2 3 3/4 7 ¼ 11 3/8 3 3/4 2 1/ /8 12 3/ /4 4 1/ /4 14 3/4 4 1/2 4 1/24 1/4 4 1/ /2 5 1/ /4 6 1/ /2 11 1/2 5 1/4 5 3/ /2 5 1/4 5 3/46 1/4 8 1/ / /4 6 1/ /2 26 1/2 5 3/4 6 1/28 1/4 10 1/4
19
20 2"-3" R/S VALVE THREADED ENDS OS&Y GENERAL DIMENSIONS 70 7 VALVE SIZE A B D E F WEIGHT* 2 5 1/4 4 1/8 7 1/4 1 /A 2 1/ /16 7 1/4 13 7/8 16 3/ /2 5 3/ /8 18 7/8 50 Kennedy Valve/KS-RW
21 14" AND LARGER RESILIENT WEDGE VALVES KS-RW KENNEDY VALVE KENNEDY VALVE AWWA Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Size Range Water Working Bubble Tight Hydrostatic Shell Pressure psi Test psi Test psi AWWA 14"-24" * UL FM 4"-16" * (NRS style only) Available in either non-rising stem or outside screw & yoke. Available End Connections & Size Range Figure No. FLG End (NRS) 14"-24" 7561SS M.J. 14"-24" 7571SS FLG & M.J. 14"-24" 7572SS FLG End (OS&Y) 14"-24" 7566SS M.J. for Tapping 14"-24" 7950SS Tyton for D.I. & C900 PVC 16" 7901SS Note: 18" and larger valves require gearing Accessories Indicator Posts Enclosed Gearing (14"-24") "T" Handles Stem Guides Electric Motor Actuators 2" sq. Operating Nuts Handwheels Extension Stems Floor Boxes Chain Wheels Floorstands (non-rising stem) MODEL KS-RW/2638 AWWA C515 REDUCED WALL DUCTILE IRON Kennedy Valve/KS-RW 14" - 24" 6-1
22 Complies with applicable requirements of AWWA C515 14"-24" R/W VALVE NRS ASSEMBLY MATERIAL LIST KENNEDY VALVE MODEL KS-RW/2638 ITEM DESCRIPTION MATERIAL ASTM SPEC. 1 HEX HEAD BOLTS STAINLESS STEEL ASTM F FLAT WASHERS STAINLESS STEEL ASTM F OPERATING NUT OR HANDWHEEL CAST IRON ASTM A126 CLASS B 4 HEX HEAD BOLTS & NUTS STAINLESS STEEL ASTM F FOLLOWER PLATE DUCTILE IRON ASTM A536 Grade STEM O-RING BUNA - N FOLLOWER PLATE O-RING BUNA - N BONNET BUSHING BRONZE ASTM B584 C STEM BRONZE ASTM B584 C HEX HEAD BOLTS & NUTS STAINLESS STEEL ASTM F COVER DUCTILE IRON ASTM A536 Grade COVER O-RING BUNA - N STEM NUT BRONZE ASTM B584 C WEDGE (EPDM Encapsulated) DUCTILE IRON ASTM A536 Grade BODY - ALL TYPES DUCTILE IRON ASTM A536 Grade WEDGE PROTECTOR CAP-18" THRU 24" DELRIN Kennedy Valve/KS-RW 14" - 24"
23 Complies with AWWA C515 16" R/W VALVE TYTON ENDS NRS GENERAL DIMENSIONS KENNEDY VALVE MODEL KS-RW/ SS VALVE SIZE A B C D E F G /2 10 1/ / Kennedy Valve/KS-RW 14" - 24"
24 Complies with applicable requirements of AWWA C515 14"-16" R/W VALVE MJ TAPPING GENERAL DIMENSION KENNEDY VALVE MODEL KS-RW/ SS VALVE SIZE A B C D E F G H J K L / /16 1/ / /16 1/ Kennedy Valve/KS-RW 14" - 24"
25 Complies with applicable requirements of AWWA C515 14"-16" R/W VALVE FLANGE X MJ ENDS GENERAL DIMENSION KENNEDY VALVE MODEL KS-RW/ SS VALVE SIZE A B C D E F G H J K / /4 18 Kennedy Valve/KS-RW 14" - 24" 6-13
26 Complies with applicable requirements of AWWA C515 14"-16" R/W VALVE MJ ENDS GENERAL DIMENSION KENNEDY VALVE MODEL KS-RW/ SS VALVE SIZE A B C D E F G H / / / /4 6-8 Kennedy Valve/KS-RW 14" - 24"
27 Complies with applicable requirements of AWWA C515 14"-16" R/W VALVE FLANGED ENDS GENERAL DIMENSION KENNEDY VALVE MODEL KS-RW/ SS VALVE SIZE A ALL FLANGE B VALVES C ARE TAPPED D & PLUGGED POSITION F "A" G H VALVE SIZE 14 A 15 B 7.5 C D E 12-1 F 26 G H inch mm inch mm inch mm inch mm inch mm inch mm # inch mm inch mm inch mm / / / / / / /4 410 Kennedy Valve/KS-RW 14" - 24" 6-3
28 Kennedy Valve
AWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
More informationAWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationDIMENSIONS (approximate)
Page 1 of 8 a NRS GATES OS&Y GATES company Model 48 Resilient Wedge Gate Valve SPECIFICATION SUBMITTAL SHEET FEATURES Sizes: 2 1/2" 3" 4" 6" 8" 10" 12" Maximum working water pressure 200 PSI Maximum working
More informationApproved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
More informationCLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
More informationAmerican Flow control Series 2500
American Flow control 14-66 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Lifting DEVICES 14-66 Valve is constructed of high-strength
More informationVALVE AND HYDRANT PRICE BOOK
VALVE AND HYDRANT PRICE BOOK HTTP://WWW.CLOWVALVE.COM EFFECTIVE DATE February 10, 2012 CLOW VALVE COMPANY 902 SOUTH SECOND ST. OSKALOOSA, IA 52577 PH# 800-829-2569 FAX# 641-673-8269 CLOW VALVE COMPANY
More information1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service.
KENNEDY KENNEDY VALVE MODEL VALVE KS-RW 1. Valves shall conform to the latest version of AWWA Standard C-509 covering Resilient Seated gate Valves for Water Supply Service. 2. The valves shall have a cast
More informationJ & S Valve GATE VALVE AWWA C509. Resilient Seated Solid Wedge Size: 2-12
J & S Valve GATE VALVE Resilient Seated Solid Wedge Size: 2-12 AWWA C509 Resilient Seated Solid Wedge Gate Valve Series 6000 AWWA C509 2 Operating Nut or Hand Wheel Stem Stainless Steel or Bronze Gland
More informationSERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 509-110 R6 OCT 2018 REPLACEABLE 0-RINGS Triple O-ring sealed with upper two O-rings replaceable with the valve fully open and subjected to the
More informationWater Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
More informationvisit us online at
PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves
More informationWater Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
More informationOPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE
OPERATION AND MAINTENANCE MANUAL 2-66 SERIES 2500 RESILIENT WEDGE GATE VALVE INDEX SERIES 2500 DUCTILE IRON RESILIENT WEDGE GATE VALVE OPERATION and MAINTENANCE MANUAL. OPERATION AND MAINTENANCE Operation,
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationSuggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
More informationSUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
More informationND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
More informationModel-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
More informationECCENTRIC PLUG VALVES
Serving the Water & Waste Water Industry Since 1878 ECCENTRIC PLUG VALVES C517 3 24 sizes available Multiple end connections available M&H Valve is a division of McWane, Inc. www.mh-valve.com AVAILABLE
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationAWWA, RESILIENT WEDGE GATE VALVES
Type AVK Ref. # Size Weight kg lb US $ Series 04 Wrench nut Ductile Iron Series 08 Handwheel for AVK gate valves series 45, 55, 65 and 66 With bolt and washer Grey cast iron Size 1"-30" Series 18/45/55/65/66
More informationAccording to AWWA-standard
According to -standard Water Fire fighting - UL/FM 304 Gate valves - Cast iron 320 Gate valves OS&Y 306 Service connection valves 322 Post indicators 306 Combi valves 307 Gate valves - 310 Gate valves
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationINSTALLATION, OPERATION, and MAINTENANCE GUIDE NIBCO Wall Mount Indicator Posts Series NIP-2AW
INSTALLATION, OPERATION, and MAINTENANCE GUIDE NIBCO Wall Mount Indicator Posts Series NIP-2AW PATENT #US 9,541,218 NIBCO Series NIP-2AW Wall Mount Indicator Posts are designed and manufactured to: Operate
More informationFabri-Valve. CF33/CF133 Ported Slide Gate Valve
Fabri-Valve CF33/CF133 Ported Slide Gate Valve CF33/CF133 Ported Slide Gate Valve Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service
More informationAMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE CONSTRUCTION STAINLESS STEEL PIPE PLUG Allows installation of pressure gauge. STAINLESS STEEL FASTENERS Helps provide corrosion resistance.
More informationAUTOMATION ACCESSORIES IN-PLANT VALVE PRODUCTS EXTENSION STEMS FLOORBOX STEM GUIDES FLOORSTANDS COMMITTED TO ENVIRONMENTAL RESPONSIBILITY FLAP VALVES
INCREASING SWING CHECK VALVES FLAP VALVES SWING CHECK VALVES AUTOMATION ACTUATION CLOW VALVE has furnished valves with many assorted types of motorized to operate our valves. The gate valves use multi-turn,
More informationmh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
More informationwith the specific application. Always read and understand the installation
Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.
More informationAmerican Flow control 5 1/4 b-84-b-5
American Flow control 5 1/4 b-84-b-5 Fire Hydrant FLOW CONTROL Construction Fully complies with AWWA C502 and is available UL Listed and FM Approved in applicable configurations. one-piece bronze OPERATING
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationInstalled on the pump suction, CRISPIN Foot Valves prevent the
Foot Valves Crispin Foot Valves SERIES Valve Function Maintains pump prime upon pump outage Features Resilient seat provides positive shut off Full flow area Stainless steel inlet screen Rugged construction
More informationAmerican Flow control 5 1/4 B-62-B-5
American Flow control 5 1/4 B-62-B-5 Fire Hydrant FLOW CONTROL Construction Fully complies with AWWA C502 and is available UL Listed and FM Approved in applicable configurations. one-piece bronze OPERATING
More informationSECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
More informationEXPECT RELIABILITY AVK RESILIENT SEATED GATE VALVES
EXPECT RELIABILITY AVK RESILIENT SEATED GATE VALVES AVK VALVES STANDARD FEATURES AVK STANDARD FEATURES AVK Gate Valves are made of ductile iron and meet or exceed AWWA C509 or C515 ASTM A582 stainless
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationDUCTILE IRON & STAINLESS STEEL. FOR WATER & WASTEWATER Treatment Plants
DUCTILE IRON & STAINLESS STEEL FOR WATER & WASTEWATER Treatment Plants About Trumbull Mud Valves Trumbull Industries was established in 1922 in Warren, Ohio (Trumbull County). Manufacturing began in the
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationMEDALLION HYDRANT. clowvalve.com AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
clowvalve.com MEDALLION HYDRANT AWWA C50 UL LISTED FM APPROVED NSF 6/37 CERTIFIED 50 PSI WORKING PRESSURE 0-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane, Inc. MEDALLION HYDRANT FIRE PROTECTION
More informationMay 2nd, 2008 LIST PRICE GUIDE. Please use in conjunction with our catalog below: WATERWORKS & IRRIGATION 2004 Catalog.
May 2nd, 2008 LIST PRICE Please use in conjunction with our catalog below: 2004 Catalog www.matco-norca.com COMMITTED TO QUALITY Visit Our Website: www.matco-norca.com e-mail: mail@matco-norca.com 2008
More informationBS 5163 Resilient Wedge Gate Valve
BS 516 Resilient Wedge Gate Valve BS 516 Flanged Resilient OS&Y Gate Valve, Type A, (XZ41X), /16, Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water,
More informationCustomer Service : Tel Toll-free Fax
Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves...3-4 TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4
More informationKENNEDY VALVE RESILIENT WEDGE GATE VALVE MAINTENANCE MANUAL
KENNEDY VALVE Division of McWane, Inc. 1021 East Water Street P.O. Box 931 Elmira, New York 14902-0931 Telephone (607) 734-2211 Fax (607) 734-1003 KENNEDY VALVE RESILIENT WEDGE GATE VALVE MAINTENANCE MANUAL
More informationAMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available Listed by Underwriters Laboratories, Inc. and Approved by FM Approvals in applicable configurations.
More informationFivalco. General Information
General Information Fivalco is a US company in our 16 th year of manufacturing Fire Protection Valves of uncompromising quality for our discerning customers. All our products are FM or UL approved and
More informationFIRE PROTECTION PRODUCTS
SUPER CENTURION FIRE HYDRANT Mueller Super Centurion Fire Hydrant Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout North America. There are a number of
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationHarlingen Water Works System Approved Products List For Subdivisions. January 11, 2005
Harlingen Water Works System Approved Products List For Subdivisions January 11, 2005 Revised March 24, 2016 Harlingen Water Works System Approved Products List for Subdivisions Table of Contents: 1. Valves
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationHP250II AND HP250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901
H250II AND H250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS RATT H250II Scope of Line... 1 Design and Construction Details... 1 ipe Mating Chart... 1
More informationSWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationGrooved Piping System for Fire Protection Services
Grooved Piping System for Fire Protection Services 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings c. Victaulic Fittings d. Hole and Branch Outlets e. Victaulic
More informationGENERAL FEATURES / SPEC M&H AWWA C502 FIRE HYDRANTS Style 929 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approval Type: Compression type, opening against line pressure.
More informationGD N (not shown) No Switches. GD N Grooved 2¹ ₂", 3", 4", 6", 8", 10"
300 PSI WWP UL/FM Butterfly Valves Designed for normally open position monitoring Elastomer Encapsulated Disc Accepts Internal Supervisory Switches Compatible with IPS Pipe 300 PSI/20.7 Bar Non-Shock Cold
More informationFabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
More informationThe PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
More informationPrice List Import Restraints
LP2016-NR Effective: February 1, 2016 Supersedes All Previous Pricing Import Restraints For Other Products See: LP2015-ND - Import Utility Fittings, Glands, Accessory Packs LP2015-D - Domestic Utility
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationSECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
More informationTechnical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved
Worldwide Contacts www.tyco-fire.com Model TJP Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator General Description TYCO Model TJP Resilient-Seated Gate Valves with Vertical and
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationCast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
More informationADMIRAL HYDRANT. clowvalve.com
clowvalve.com ADMIRAL HYDRANT AWWA C502 UL LISTED FM APPROVED NSF 61/372 CERTIFIED 250 PSI WORKING PRESSURE 350 PSI WORKING PRESSURE AVAILABLE 10-YEAR LIMITED WARRANTY Clow Valve, A Division of McWane,
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationIron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationValves. BS Standard JINAN MEIDE CASTING CO., LTD.
Valves BS Standard JINAN MEIDE CASTING CO., LTD. Resilient Wedge Gate Valve XZ81X Grooved Resilient OS&Y Gate Valve Page 11 XZ51X Flanged x Grooved Resilient OS&Y Gate Valve Page 12 Z85X Grooved Resilient
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationCrispin. The UL Series Universal Air Release Valves. Compound Lever System NPT Screwed or ANSI Class Flanges Available.
The UL Series Universal Air Release s Compound Lever System NPT Screwed or ANSI Class Flanges Available Crispin Since 105 sales@crispinvalve.com Universal Air Release s Universal Air Release UL SERIES
More informationKnife Gate & Butterfly Valves Data Sheets
Knife Gate & Butterfly Valves Data Sheets Series 80-TP Series 80-TP/XL Series 80-BA Series 80-SS Series 80-SSRS Series 80-DI Series 150 Series 120 Butterfly Valves Series TM-3 & TM-4 Butterfly Valves www.townley.net
More informationSuper Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes
Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May
More informationProject: Customer: Engineer: Pump Manufacturer: Drawing Submittal Package Model GPL Limited Service Full Voltage Across the Line Start Electric Pump Controller Contents: Submittal Data Sheets Dimensional
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationSECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
More informationValves. Fittings. Actuators
Valves Fittings Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; CE Registered Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged,
More informationMueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
More informationBUTTERFLY VALVES KENNEDY 140 YEARS AWWA C504 CLASS 150B & 250B CERTIFICATIONS ISO 9001 ISO BS OHSAS
KENNEDY BUTTERFLY S CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C504 CLASS 150B & 250B STYLE 4500 3-24 STYLE 1450 30-54 CONSULT KENNEDY FOR SIZES LARGER THAN 54 INCHES. 140 YEARS WWW.KENNEDY.COM
More informationStandard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections
Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;
More informationThe GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
More informationSECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
More informationAMERICAN FLOW CONTROL 5 1/4 B-62-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-62-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and Approved by FM Approvals in applicable configurations. ONE-PIECE BRONZE
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
More information87/88 Pneumatic Multi-Spring Diaphragm Actuators
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Valves 87/88 Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced
More information