Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
|
|
|
- Anthony Welch
- 5 years ago
- Views:
Transcription
1 Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing systems. The pilot operated Mark 695 responds to very small changes in tank pressure by throttling open or closed to maintain the desired pressure set point. Accurate regulation down to 1/2" wc (1.25 mbar) ANSI Class VI Shutoff Two available spring ranges 200 psi maximum inlet pressure Five Cv's; 1, 2, 4, 7.5*, 10* Standard Filter with dripwell to prevent pilot damage Ultra Lightweight Diaphragm for Maximum Sensitivity *7.5 Cv and 10 Cv available in 1" size only Optional Features Inlet Gauges: 0-100, Diagnostic Gauges: 0-100, Gauge Pair- Inlet & Diagnostic: 0-100, Purge Feature Optional High Alloys Available ANSI, DIN, & JIS Flanged Ends *Shown with Optional Inlet Gauge Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators Jordan Valve a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com
2 Sizes: 3/4" - 1" (DN20 - DN25) Specifications Service: Tank blanketing End Connections FNPT, ANSI Flanges DIN, JIS Body Materials Stainless Steel ASTM A SS Other Materials Available - Consult Factory Trim Material: 316SS (Standard on all valves) Main Valve Seat Material: 316SS/Viton, EPDM, Buna-N Actuator Materials Stainless Steel Diaphragm Material: Ultra Lightweight Teflon Shutoff: ANSI Class VI Available Spring Ranges wc, 4-10 wc Minimum & Maximum Pressure Drop: 25 psi minimum (1,7 bar); 200 psi maximum (13,8 bar) Pressure Temperature Ratings (Body): Maximum inlet F Maximum Outlet Casing Pressure: 25 psi (1,7 bar) Flow Coefficients: 1, 2, 4, 7.5*, 10* Cv *7.5 Cv and 10 Cv available in 1" size only Set Point 0.50" " w.c. ( mbarg) (Please consult the factory) 0.75"- 1.00" w.c. ( mbarg) 1.05"- 10" w.c ( mbarg) Minimum Recommended Inlet Pressure Maximum Inlet Pressure (Consult Factory for Higher Inlet Pressures) 3/4" - 1" Size 100 psig (6.9 barg) 125 psig (8.6 barg) 200 psig (13.8 barg) 20 psig (1.38 barg) > 35 psig (2.41 barg) * 1" only -2-
3 Flow table for nitrogen C v 1 C v 2 C v 4 C v 7.5* C v 10* psig bar kg/cm³ kpa SCFH Nm³/h SCFH Nm³/h SCFH Nm³/h SCFH Nm³/h SCFH Nm³/h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , * Please refer to API 2000 for calculation of flow requirements. Conversion Factors: Air- Multiply by Dry CO 2 - Multiply by Natural Gas (sg 0.60)- Multiply by For all other gasses, compute a correction factor which is equal to 0.985/( SG). Then multiply by the correction factor. * 7.5 Cv and 10 Cv available in 1" size only -3-
4 Principle of Operation Range Spring Pilot Chamber Ultra Thin Diaphragm Restricting Orifice Pilot Chamber Main Valve Plug Inlet Bleed Pressure Pilot Seat Pilot Chamber Vent to Downstream Return Spring Figure 1 - Valve Closed Inlet pressure is under the main valve plug, and through the restricting orifice it is also in the pilot chamber, and above the main valve plug, Inlet pressure above the main valve plug, together with the return spring hold the plug down and closed. Inlet Pressure Control Pressure Tank Pressure Return Spring Inlet Pressure Under Main Plug Figure 2 - Valve Open As the pressure in the tank falls, the reduced pressure force on the ultra thin diaphragm allows the range spring to push down against the pilot and open the pilot seat. Pressure from the pilot chamber and above the main valve plug begins to vent to downstream. Inlet bleed pressure is unable to be replenished in the pilot chamber and above the main valve plug because of the restricting orifice and this allows the unrestricted inlet pressure below the main valve plug to open it against the return spring. -4-
5 Adjusting Screw Closing Cap Upper Spring Guide Range Spring Ultra Lightweight Diaphragm Upper Actuator Case Diaphragm Retainer Lower Actuator Case Pilot Assembly Main Plug Assembly Valve Body -5-
6 Pilot Body Main Piston O-Ring Plug Assembly Pilot Body / Main Body O-Ring Main Plug O-Ring Main Piston Main Plug Assembly Main Plug Pilot Upper Case O-Ring Pilot Upper Cage Pilot Body Inner O-Rings Pilot Plug Balance Diaphragm Pilot Piston Pilot Return Spring Pilot Assembly Main Return Spring -6-
7 Dimensions 3/4" - 1" MK695 MK695 Tank Blanketing Regulator FNPT Ends as Shown, Other End Connections available, Consult Factory -7-
8 MK695/0518 Ordering Schematic for MK695 Model No. Size Body Material Description /4" 100 1" SB ZZ Stainless Steel (A479) Non-Standard 1 & 2 End Conn. & Cv P NPT A 1-2 B 4 C 7.5 D 10 ZZ Non- Standard 7 & 8 Range A " w.c. A8 4-10" w.c. ZZ Non-Standard 3 & 4 Seat & O- Ring B Buna-N A 1-2 V Viton B 4 E EPDM C & 6 Cv A1 1 Cv A2 2 Cv A4 4 Cv A7* 7.5 Cv A9* 10 Cv * Available in 1" size only 9 & 10 Actuator S1 Standard ZZ Non-Standard D & 12 Accessory G1 Inlet Gauge G2 Inlet Gauge D1 Diagnostic GA D2 Diagnostic GA Inlet/ Diag. Pair Inlet/ Diag. Pair P1 ZZ Purge System Non-Standard CAUTION: The following information is subject to change. Product Numbers and Description should be checked with the Factory for accuracy before Order Entry. Jordan Valve a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com
Mark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators
Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908
Mark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
Mark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
Mark 6127 Series. Pressure Regulators Mark 6127 Series. Pressure Reducing Valves. Valve Features. Operation
Mark 6127 Series Pressure Reducing Valves The primary function of the Mark 6127 is to reduce a greater upstream pressure to a lesser, more manageable downstream pressure, operating without regard to either
Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features
Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark
Mark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation
Mark 5108 Series Back Pressure Regulating Valves In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. The Mark 5108 is designed to do just that.
Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features
Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure
JRPH/JRPL Series. Pressure Reducing Valves. a division of Jordan Valve PRESSURE REDUCING VALVE JRPH & JRPL SERIES FLOW CONFIGURATIONS
a division of Jordan Valve JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVE The LowFlow JRPH Series and JRPL Series are piston operated, balanced trim pressure regulators with high Cv's
MK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
Mark 75HW Series. Hand Operated Valves Mark 75 Pneumatic Control Valves. Wafer Style Hand Operated Valves. Size and Price Advantage
Mark 75HW Series Wafer Style Hand Operated Valves The Mark 75HW is a manually operated, sliding gate control valve. The wafer style body provides great value for the end user while offering all of the
T205 Series Tank Blanketing Regulators
T205 Series Tank Blanketing Regulators Bulletin 74.1:T205 September 2013 Figure 1. Type T205 Tank Blanketing Regulator Contents Features...1 Introduction...2 Specifi cations...2 Principle of Operation...2
Mark 78 Series. Control Valves Mark 78 Globe Style Control Valves. Globe Style Control Valve. Function. Features. CRN Registration Number Available
Mark 78 Series Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can be used on a variety of applications,
Product overview. Technical data
VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.
Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds
T205 Series Tank Blanketing Regulators
Bulletin 74.1 D103747X012 T205 Series June 2018 T205 Series Tank Blanketing Regulators Figure 1. Type T205 Tank Blanketing Regulator Contents Features... 1 Introduction.... 1 Specifications... 2 Principle
ANDERSON GREENWOOD. Flow Control. Anderson Greenwood Tank and Equipment Blanketing Systems. Pad Valves. De-Pad Valves. Total Flow Control Solutions
ANDERSON GREENWOOD The Complete Blanketing and Safety Valve System! Anderson Greenwood is truly the world leader in tank protection and blanketing. Anderson Greenwood has the experience and products to
High Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
Mark 79/79MX Series JORDANVALYE. Three-Way Control Valves
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
Control Valves & Regulators
Control Valves & Regulators Sliding Gate Valves Pressure Regulators Temperature Regulators Control Valves Positioners Jordan Valve sliding gate regulators and control valves are excellent choices for many
Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available
Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the
JB Series. Gas Back Pressure Reducing Valves BACK PRESSURE REDUCING VALVE
JB Series Gas Back Pressure Reducing Valves BACK PRESSURE REDUCING VALVE The LowFlow JB Series line of back pressure regulators have the ability to handle very high pressures and very low flows. These
Jordan Control Valve Series
Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced
1/4" JRPH/JRPL Series
1/4" JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVES The 1/4" LowFlow JRPH Series and JRPL Series are piston operated pressure regulators that offer excellent control at Cv's of 0.20
Mark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for
MK508MM Series. Back Pressure Regulators Mark 508MM Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
MK508MM Series Self-Operated Back Pressure Regulators The MK508MM series are spring loaded, self actuated, direct-operated valves. The Mark 508MM Back Pressure Regulating Valves regulate upstream pressure
Direct-operated, Back Pressure Regulating Valve. Features
MK508BPM Series Direct-operated, Back Pressure Regulating Valve The MK508BPM series are spring loaded, self actuated, direct-operated, valves. Pressure relief valves are used to protect the system from
MK608MM Series. Pressure Regulators Mark 608MM Self-Operated Pressure Regulator. Self-Operated Pressure Reducing Valve. Features
MK608MM Series Self-Operated Pressure Reducing Valve The MK608MM series is a spring loaded, self actuated, direct-operated valve. They are available in 1 up to 10 inches (DN25 through DN250) body sizes.
Type 310A-32A Pressure Reducing Regulator
Bulletin 71.2 D102066X012 Type 310A February 2017 Type 310A-32A Pressure Reducing Regulator Figure 1. Type 310A Regulator with Type 32A Pilot Introduction The Type 310A pilot-operated high-pressure regulator
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications JSRLP is a high purity gas low pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. The JSRLP
Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES
Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced
Mark 89/89MX Series. Temperature Regulators Mark 89/89MX Three-Way Temperature Regulators. Three-Way Temperature Regulators.
Mark 89/89MX Series Three-Way Temperature Regulators The Mark 89 is used for diverting service and is ideal for bypassing fluids around coolers or filters. In this configuration, there is one inlet and
LVG SERIES. Gas Limiting Orifice Valve. Features. Benefits. Combustion Excellence Since 1888 LVG-1
Gas Limiting Orifice Valve Features Precision machined valve flow piston Rugged cast iron body Replaceable cartridge assembly for LVG 55-5 Straight through valve design; right angle valve option Pressure
708MV Series Motor Valve
708MV Series Motor Valve FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708MV offers several advantages including extreme accuracy, high turndown ratios and repeatability. The features
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
specification DAtA V R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500
specification DAtA V500-2016-R0 pilot operated tank blanket VAlVe, pressure regulating VAlVe SERIES V500 Series V500 PILOT OPERATED TANK BLANKET VALVE, PRESSURE REGULATING VALVE contents Application, Features,
Mark 80. Self-Operated Temperature Regulators. Temperature Regulators Mark 80 Self-Operated Temperature Regulators FEATURES
Mark 80 Self-Operated Temperature Regulators The MK80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the valve. The operation of
Mark 75 Series. Control Valves Mark 75 Pneumatic Control Valves. Wafer Style Control Valves. Pricing Advantage. Weight Advantage
Mark 75 Series Wafer Style Control Valves The Mark 75 wafer style control valve was developed by Jordan Valve as the next generation of control valves. Featuring all the benefits of the time-tested Sliding
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications
Bulletin 71.1 D103087X012 Type HSR December 2017 Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications High Capacity Compact Design P1524_1 High Capacity Internal
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators
CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators September 2014 P1182 typical type cp400 regulator P1522 P1410 Typical type CP403 Regulator WITH INTEGRAL TRUE-MONITOR PROTECTION
Type T205B Balanced Tank Blanketing Regulator
April 2014 Type T205B Balanced Tank Blanketing Regulator Figure 1. Type T205B Balanced Tank Blanketing Regulator Contents Introduction...2 Specifications...2 Features...3 Principle of Operation...3 Installation...4
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve The JSBLF is a fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME BPE low flow
Type MR108 Direct-Operated Backpressure Regulators
July 2016 Type MR108 Direct-Operated Backpressure Regulators P1202_1 P1203_1 Type mr108 with low-pressure Actuator Type mr108 with high-pressure actuator Figure 1. Type MR108 Direct-Operated Backpressure
cs200 series commercial / Industrial pressure reducing regulators
November 2013 cs200 series commercial / Industrial pressure reducing regulators P1188 Figure 1. Typical CS200 Series Pressure Reducing Regulator Features and Benefits Wide Range of Body Sizes and End Connections
"Send a signal not a technician" Mark 95AA and Mark 95AAFT upgrade kits available for currently istalled MK95 regula- tors Air Loading a MK95AA:
Mark 95 Series Sanitary ir ugmented Back Pressure Regulators The Mark 95 with air augmentation () option offers the same line sizes, Cv choices, seats, low build up characteristics, and stability of the
Sanitary Valves JSB Series Back Pressure Valves
3L/T-2R/S33 Series JS Series Compact, High Purity ack Pressure Regulating Valve J-Pure is the first fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME PE
ABOUT US. LOWFLOW VALVE 3170 Wasson Road Cincinnati, OH USA LowFlowValve.com
Fractional Flow Control Valves Heavy Duty Control Valves (DN8 - DN50) Pressure Regulators Back Pressure Regulators Piston Operated Pressure Regulators Diaphragm-Sensed Pressure Regulators High Pressure
ABOUT US. LOWFLOW VALVE 3170 Wasson Road Cincinnati, OH USA LowFlowValve.com
Fractional Flow Control Valves Heavy Duty Control Valves (1/4" - 2") Pressure Regulators Back Pressure Regulators Piston Operated Pressure Regulators Diaphragm-Sensed Pressure Regulators High Pressure
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators
Mark 95 Series CRN Registration Number vailable Sanitary Back Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (open yoke) and Model 5450 (closecoupled) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry.
708 Series. Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES. CRN Registration Number Available
708 Series Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708 was developed by Jordan Valve to provide the most accurate control available for fractional
Mark 33 Series. Control Valves Mark 33/39 Electric Motor Control Valves. Electric Motor Control Valves. Features. CRN Registration Number Available
Mark 33 Series Electric Motor Control Valves The Mark 33 is a motor operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motors for proportional (resistance), on-off, 4-20mA
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
THE SLIDING GATE SEAT: A BETTER DESIGN
PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept
THE SLIDING GATE SEAT: A BETTER DESIGN
PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept
SVC/SHC Series. Sanitary Check Valves. NEW - SVC for vertical down process outflow and drain installations. Features
SVC/SHC Series Sanitary Check Valves NEW - SVC for vertical down process outflow and drain installations The patented SVC/SHC Series are vertical and horizontal check valves designed specifically for use
Mark 37/377 Series. Control Valves Mark 37/377 Final Control Element. Final Control Element. Features
Mark 37/377 Series Final Control Element The Mark 37 is a motor-operated control valve that combines a state-of-the-art electronic linear actuator with the exceptional performance of Jordan s sliding gate
Mark 75PTP Series JORDANVALVE. Piston Operated Wafer Style Control Valves. CRN Registration Number Available
Mark 75PTP Series CRN Registration Number Available Piston Operated Wafer Style Control Valves The Mark 75PTP is a Mark 75 wafer style control valve with an 80mm (1" - 2"} Stainless Steel Piston Actuator.
Mark 978 Series STERIFLOW. Sanitary Control Valve. Sanitary Valves Mark 978 Globe-Style Control Valve AVAILABLE FINISHES FEATURES APPLICATIONS
Mark 978 Series Sanitary Control Valve The Mark 978 Sanitary Control Valve Series is designed to meet the required specifications for sterile process control valves. The MK978 Series is suitable for a
F300 Pressure Regulator
F300 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P302 has Internal Relief Valve for Overpressure Protection Ideal for Fix Factor Billing The F300 series pilot operated
T205VB Series Tank Blanketing Vacuum Breakers
February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small
Direct or Reverse-Acting?
Control Valves Use of Positioners Minimize the effects of friction & hysteresis / reduce dead band. Increase differential pressure capability. Permit split range operation / high rangeability in slow response
Built-in Slam-Shut Valve. Independent pneumatic control Accuracy class: ±5% Response time: 1 second. 1/2, 11/16, and 3/4-inch (13, 18, and 19 mm)
RP Series Regulators Introduction The RP Series regulators are direct-operated with non-balanced trim. Normally they are fitted with a built-in filter. They are produced in the following versions: Types
JSRLF Series. Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas Application
JSRLF Series Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas Application New Option! EPDM seat for low lockup and tight shutoff on no flow or deadhead blanketing applications The
Ideal Installation. I & M Mark 67 (1/2 6 ) Control Line. Installation & Maintenance Instructions for Mark 67 Pressure Regulators
I & M Mark (/ ) 0 Wasson Road Cincinnati, OH 0 USA Phone --00 Fax -8-00 info@richardsind.com www.jordanvalve.com Installation & Maintenance Instructions for Mark Pressure Regulators Warning: Jordan Valve
3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-09i-FLG In-Line Pressure Reducing Valve Spring diaphragm
Type MR108 Direct-Operated Backpressure Regulators
August 2013 Type MR108 Direct-Operated Backpressure Regulators P1202 P1203 TYPE MR108 WITH LOW- ACTUATOR TYPE MR108 WITH HIGH- ACTUATOR Figure 1. Type MR108 Direct-Operated Backpressure Regulators Contents
DBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
Marwin Valve 4700 Series 2000 WOG Three Piece Ball Valves
4700 Series 2000 WO Three Piece Ball Valves Fire Tested API 607 4 th ed. APPROVEDDD The new Marwin 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WO rated
B42 Series Regulator Residential Regulator
B42 Series Regulator Residential Regulator The B42 is a spring loaded self-operated regulator with internal relief option. The B42 features a molded diaphragm, 6:1 lever ratio and one inch vent. The benefit
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated
a Proportion-Air brand Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated 1 Burling Valves Largest Cv per valve size - Possible smaller, more cost
JSRLF Series. Sanitary Valves JSRLF Series Low Flow Gas Reducing Valves
JSRLF Series Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas pplication The Steriflow JSRLF Series line of low flow pressure regulators have the ability to handle very high pressures
KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
Pressure Regulators RHPS Series
Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
PRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance
globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators. Features
Mark 95 Series Sanitary ack Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited for virtually any sterile
I & M Mark 78 Series. Ideal Installation. Start-Up. Installation & Maintenance Instructions for Mark 78 Control Valves (1/2-1 )
I & M Mark 8 Series 30 Wasson Road Cincinnati, OH 4509 USA Phone 53-533-5600 Fax 53-8-005 info@richardsind.com www.jordanvalve.com Installation & Maintenance Instructions for Mark 8 Control Valves (/ -
CASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
Instrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.
Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
Mustang Series PRESSURE REDUCING CONTROL VALVE. M115 (Globe) M1115 (Angle) Schematic. Standard Components. Options & Accessories.
PRESSURE REDUCING CONTROL VALVE 02/09 Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L Standard Components 1 Main Valve
Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications
March 2013 Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications High Capacity Compact Design High Capacity Internal Relief TYPE HSR ANGLE BODY Globe Bodies Angle
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated 1 Burling Valves Largest Cv per valve size - Possible smaller, more cost effective valve selections
T200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
Anderson Greenwood Low Pressure POPRV Catalog Series 90 and 9000 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 90 and 9000 valves offer a high performance alternative to spring and weight-loaded relief devices for low pressure systems. Features and Benefits Tight Up to Set Pressure: Pilot
PRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
PRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
Special Kv available. Classification according pressure equipment Directive, 2014/68/UE
SELF-OPERATED PRESSURE REGULATORS PRESSURE REDUCING VALVE MODEL PRV45 PRODUCT FEATURES Self-actuating pressure reducing valve balancing by diaphragm used to provide a constant downstream still there being
PRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
ANDERSON GREENWOOD LOW PRESSURE POPRV CATALOG SERIES 90 AND 9000 PILOT OPERATED PRESSURE RELIEF VALVES. Product overview
VALVES & CONTROLS ANDERSON GREENWOOD LOW PRESSURE POPRV CATALOG Series 90 and 9000 valves offer a high performance alternative to spring and weight-loaded relief devices for low pressure systems. Product