Overview Replacement Meterbody and Heads for Model STD 110
|
|
- Quentin Foster
- 6 years ago
- Views:
Transcription
1 ST 3000 Smart Transmitter, Release 300 and Smart Field Communicator Model STS03 Transmitter Model STD0 34-ST /03 Addendum (to User s Manual 34-ST-5-4B) Overview Replacement Meterbody and Heads for Model STD 0 The ST 3000 Pressure Transmitter (Model STD0) is now being shipped with newly designed meter body and process heads. If a replacement meter body is needed, it should be ordered from the Model Number stated on the meter body nameplate. This meter body replacement number will start with STD0S-xxx... This new transmitter is functionally identical to previous models, with the same specifications and intended applications (Draft Range: 0 H O [5 mbar]). The new version, which will continue as Model STD0, differs only in the physical size and form of the meter body, process head, and associated components. With exceptions noted in this addendum, information given in User s Manual 34-ST-5-4B applies also to this newer design. Installation, operation, maintenance, calibration, and troubleshooting tasks remain virtually the same as for the previous version. Differences appear primarily in torque specifications when replacing meter bodies, and in part numbering and part recognition when replacing components or assemblies. Related Publications This addendum provides details for parts replacement that span a variety of applications of the Model STD0. For applicability of parts for specific options available for the Model STD0, refer to: For availability and applicability of parts, refer to: ST 3000 Smart Transmitter Series 00 Differential Pressure Models Specification and Model Selection Guide 34-ST /03 34-ST-99-8 (Addendum to 33-ST-5-4B) of
2 Additions to the User Manual The additions and changes to User Manual 34-ST-5-4B that relate to the newly designed meter body and process heads are given in Table of this addendum. Use the information in Table to reference and annotate your User Manual. Page # in User Manual Table Additions/Changes to the User Manual Sub-Section Description of Change Piping ST3000 Transmitter Table 5 Installing Flange Adapter Inspecting and Cleaning Barrier Diaphragms Table 54 Process Head Bolt Torque Ratings In Step 5, do not use the torque specification of 47.5 to 54 N m (35 to 40 lb-ft). Instead, torque Flange Adapter bolts evenly to 47,5 N m +/-,4 N m (35 Lb-Ft +/-.8 Lb-Ft). In Step 8, do not use specifications for head given in Table 54. Instead, torque head bolts/nuts to the following specifications. 0,3 N m ± N m (5.0 Lb-Ft ± 0.8 Lb-Ft) 79/ Replacing Meter Body Table 5 Replacing Meter Body Only In Step 9, the reference to Table 48 for torquing head bolts/nuts should be as follows. 0,3 N m ± N m (5.0 Lb-Ft ± 0.8 Lb-Ft) 4-7. Replacement Parts Figure 57 and Table 7 Figure 57 illustrates the replacement parts available for the previous design of meter body and process heads for the Model STD0 Transmitter, and Table 7 provides part numbers and descriptions for the parts called out in Figure 57. For the newly designed meter body and process heads, use Figure of this addendum to locate replacement parts, and use Table of this addendum for part numbers and descriptions. For applicability of parts, refer to: ST 3000 Smart Transmitter Series 00 Differential Pressure Models Specification and Model Selection Guide 34-ST-03-0 of 34-ST-99-8 (Addendum to 33-ST-5-4B) 04/03
3 Figure ST 3000 Model STD0 (Revision S or greater) 04/03 34-ST-99-8 (Addendum to 33-ST-5-4B) 3 of
4 Table Parts Identification for Callouts in Figure Key No. Part Number Description Qty/ Unit Specify complete model number from nameplate plus R300 Kc K4 K8 Specify complete model number from nameplate plus R Series 00 replacement meter body without heads Series 900 replacement meter body without heads Bolts and Nuts Kit, Carbon Steel Bolts SS (NACE) and Nuts, 30/304 SS (NACE) Kit Bolts SS (non-nace) and Nuts SS (NACE) Kit Bolts B7M and Nuts B7M Kit Each Bolts and Nuts Kit includes: Bolt, Hex head, 7/-0 UNF,.50 Inches long (Flange Adapter) 4 Nut, Hex, 7/ UNC (Process Head) 4 Bolt, Hex Head, 7/ UNC X 3.5 inches long (Process Head) 4 K K K Drain and Plug Kit, stainless steel Drain and Plug Kit, Monel Drain and Plug Kit, Hastelloy C Each Drain and Plug Kit includes: Pipe Plug Vent Plug Vent Bushing 4 K K Meterbody Gasket Kit (PTFE Material); Kit includes: Meterbody Gasket Kit (Viton Material); Kit includes: Gasket, Process Head Gasket, Flange Adapter O-Ring, Meterbody to Electronics Housing 3 K K Gasket only, Process Head ( PTFE Gaskets/pack) Gasket only, Process Head ( Viton Head O-Rings) Gasket only, Flange Adapter, PTFE Adapter Gaskets Gasket only, Flange Adapter, VITON Adapter O-Rings 4 of 34-ST-99-8 (Addendum to 33-ST-5-4B) 04/03
5 Table Flange Adapter Kits Key No. Part Number Description Quantity Per Unit Flange Adapter Kit, with: SS Flange Adapters and with carbon steel bolts SS Flange Adapters and with SS (NACE) bolts SS Flange Adapters and with SS (non-nace) bolts SS Flange Adapters and with B7M alloy steel bolts Monel Flange Adapters and with carbon steel bolts Monel Flange Adapters and with SS (non-nace)bolts Monel Flange Adapters and with B7M alloy steel bolts Hastelloy C Flange Adapters and with carbon steel bolts Hastelloy C Flange Adapters and with SS (non-nace) bolts Hastelloy C Flange Adapters and with B7M alloy steel bolts Each Flange Adapter Kit includes: Kb Kc Gasket, Flange Adapter Flange Adapter Bolt, hex head, 7/-0 UNF,.50 inches long, Flange Adapter SS Blind Flange Adapter Kit, with Carbon Steel bolts SS Blind Flange Adapter Kit, with SS (NACE) bolts SS Blind Flange Adapter Kit, with SS (non-nace) bolts SS Blind Flange Adapters and B7M alloy steel bolts Blind Flange Adapter Kit includes: Kb Kc Gasket, Flange Adapter Flange Adapter Bolt, hex head, 7/-0 UNF,.50 inches long, Flange Adapter 4 04/03 34-ST-99-8 (Addendum to 33-ST-5-4B) 5 of
6 Table 3 Process Head Assembly Kits Key No Part Number Description Quantity Per Unit Process Head Assembly Kit, with PTFE Gasket and with: Hastelloy C head with side vent/drain Carbon steel head with side vent/drain Stainless steel head with side vent/drain Monel head with side vent/drain Carbon steel head without side vent/drain Stainless steel head without side vent/drain Process Head Assembly Kit, with VITON Gasket and with: Hastelloy C head with side vent/drain Carbon steel head with side vent/drain SS head with side vent/drain Monel Head with side vent/drain Carbon Steel Head without side vent/drain Stainless Steel Head without side vent/drain Each Process head Assembly Kit includes: K K K3 K5 K Pipe Plug (See Note.) Vent Plug (See Note.) Vent Bushing (See Note.) Process Head Gasket (PTFE), Process Head Gasket (PTFE), Flange Adapter NOTE: This item is made of the same material as the Process Heads, except for Kits with carbon steel Process Heads, which include stainless steel Pipe Plug, Vent Plug, and Vent Bushing. of 34-ST-99-8 (Addendum to 33-ST-5-4B) 04/03
Kit Instruction (Meter Body Replacement Parts)
XYR 6000 Pressure Transmitter Models STDW924, STDW930, STDW974, STGW944, STGW974, STGW94L, STGW97L, STGW98L, STAW94L ST 3000 Smart Pressure Transmitter Models (Revision S or later) STD110, STD120, STD125,
More informationReplacing the Meter Body / Process Head Parts
Replacing the Meter Body / Process Head Parts ST 700 and ST 800 Pressure Transmitters and SMV800 Multivariable Transmitter - Instruction sheet Document Number: 34-ST-33-70 Effective Date: 5/27/2016 (Process
More informationSmith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
More informationInstrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
More informationTBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument
More informationMeter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
More informationSV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
More information압력트랜스미터 Model ADP9000 Series
ALIA PRODUCT 압력트랜스미터 Model ADP9000 Series GEERAL ADP9000 series is a digital differential pressure transmitter designed for industrial pressure measurement applications. The ADP9000 offer Configurations
More informationInstrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
More informationProduct presentation SITRANS P310
Product presentation SITRANS P310 Unrestricted / Siemens 2016. All Rights Reserved. usa.siemens.com/pressure SITRANS P family Page 2 SITRANS P pressure transmitter Single range transmitters for general
More informationProcess connection. Further designs. Order code. to EN
Replacement measuring cell for pressure for SITRANS P, DS III, DS III PA and DS III FF series 7 M F 4 9 9 0-7 7 7 7 0-0 D C 0 0.01... 1 bar g (0.15... 14.5 psi g) B 0.04... 4 bar g (0.6... 58 psi g) C
More informationLEVEL CONTROL SWITCHES
The LINC-282 & LINC-282SC Series: Snap Acting, Non-Bleed Pneumatic Level Control Switches Application: These units are used as a level control or as a high or low level alarm. The pneumatic output can
More informationDIAPHRAGM SEALS. MHP SERIES MINI HIGH PRESSURE Mini diaphragm seal for pressures up to 6000 psi
DIAPHRAGM SEALS seals, also referred to as isolators or chemical seals, are used to protect instruments from viscous, corrosive or very high temperature process media. PIC stocks, fills and calibrates
More informationRosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
More informationTRANSMITTER ATTACHES TO THIS SURFACE
FIELD DEVICES - PRESSURE Product Specifications Logo PSS 3-5A1 B Model IFOA Integral Flow Orifice Assembly Used with I/A Series or Pneumatic d/p Cell Transmitters PNEUMATIC TRANSMITTER TRANSMITTER ATTACHES
More information413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F
Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections
More informationGeneral Specifications
General Specifications Manifolds for DPHarp EJA and EJX Pressure and Differential Pressure Transmitters Yokogawa Europe bv has included Sami Instruments manifolds in his DPHarp pressure and differential
More informationModel RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
More informationINTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
More informationAnderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
More informationRosemount 3051S Electronic Remote Sensor (ERS) System
Rosemount 3051S Electronic Remote Sensor (ERS) System The Rosemount 3051S ERS System is a flexible, 2-wire 4-20 ma ART architecture that calculates differential pressure (DP) electronically using two pressure
More informationManifold & Gauge Valves I [
Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle
More informationU1 PUMP PARTS PRICE LIST
006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1
More informationStatic Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
More informationSmart Pressure Transmitter
DOC. NO.: C3500L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3500L 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,
More informationFKL (25, 75, 150, 205, 250 & 400) Exploded View
3 FKL (5, 75, 50, 05, 50 & 400) Exploded View 3 4 5 6 7 8 9a0 a 3 4 5 6 7 34 35 8 9 0 40 4 4 43 36 37 38 39 44 45 46 65000005 Rev A 4 5 6 Fristam FKL Series Pumps 33 3 7 8 48 47 3 49 9 30 3 b 3 49 33 50
More informationNAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
More informationModels 9202C, 9203C, 9252C-C, and 9253C-C
Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-09i-FLG In-Line Pressure Reducing Valve Spring diaphragm
More informationRosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated
Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
More informationManifold Valves. Important!
Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating
More informationMANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
More information9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
More informationANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
More informationRosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
More informationRosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated
Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
More informationABB measurement & analytics data sheet. Model M26 Manifold line for 266 pressure transmitters
ABB measurement & analytics data sheet Model M26 Manifold line for 266 pressure transmitters Measurement made easy Engineered solutions for all applications 2 M 26 M a n ifol d li n e for 26 6 p r ess
More informationAnderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
More informationVALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
More informationErrata Sheet. for The following Instruction Manuals
Errata Sheet April 2005 2500-249 Series Errata Sheet for The following s Title Form Number Date Caged 249 Series Displacer Sensors 1802 May 2003 Cageless 249 Series Displacer Sensors 1803 Type 249W Cageless
More informationHand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
More informationHand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds
Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationManifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
More informationFabricated Tee Strainers Style T & TQ; 150#, 300# and 600# Flanged or Butt Weld Connections...6 Technical Data...7
07/1 Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Style FSA & FSSA; 900#, 100# and 00# Flanged or Butt Weld Connections...*
More information570, 571, 573 Control Valves
Features Valve Sizes and Connections The 2, 3, 4, 6, and 8 flangeless valves will mate ANSI, 300, and 600 raised face flanges. The 2, 3 4, 6, 8, 10, and 12 RF flanged 571 and 573 will mate with ASME (571)
More informationDistributed By: M&M Control Service, Inc
Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 150#, 300# and 600# Flanged or Butt Weld Connections...2 Technical Data...3 Style FSA & FSSA; 900#, 1500# and 2500# Flanged or Butt Weld Connections...*
More informationAuto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
More informationSmart Pressure Transmitter
DOC. O.: C3700-L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3700-L 298-29, GODA-RO, GUPO-SI, GYEOGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,
More informationSERIES ECCENTRIC DISC CONTROL VALVES
1-2471 SERIES ECCENTRIC DISC CONTROL VALVES - 2 - 1-2471 SERIES ECCENTRIC DISC CONTROL VALVES 1-2471 series control valves feature a double eccentric disc and an easy-to-be changed PTFE or metal seal ring.
More informationSATRON VDt Differential Pressure Transmitter
SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire
More information1451 Control Valve. General Instructions. Table of Contents
1451 Control Valve General Instructions The SOR 1451 Freezeless control valve is a high-pressure, reverse-seating liquid control valve typically used in separators and other process vessels. The body screws
More informationNatural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
More informationDesign CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet
Instruction Manual Form 5410 November 1998 Design CP/ENVIRO-SEAL Bellows Seal Design CP Control Valve with ENVIRO-SEAL Bellows Seal Bonnet Contents Introduction.............................. 1 Scope of
More informationSITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
More informationD1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
More informationManifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
More informationHYDROSTATIC TEST SYSTEM MANUAL
PDQC HYDROSTATIC TEST SYSTEM MANUAL Technical Specification Operating Instructions Part List Revised 12-2016 Manual # PDQC- 6,000 And PDQC-10,000 1 PDQC PERFORMANCE DATA Model Number Maximum Pressure Volume
More informationSeries Pilot Operated Pressure Relief Valves 0810C
Series 00 Pilot Operated Pressure Relief Valves 00C Numbering System To simplify the selection and specifying of Farris pressure relief valves, use the following type numbering system. The type numbering
More information304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
More informationOrifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC
Flow measurement Orifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC WIKA data sheet FL 10.01 Applications Power generation Oil production and refining Water treatment
More informationU2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
More informationValve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51
Valves and protective devices Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51 WIKA data sheet AC 09.23 Applications Shut-off, pressure
More information2010TC for Differential Pressure, Pressure and Temperature (Mass Flow)
Technical data 2 Principle of Operation and Construction The transmitter has a modular design and consists of the differential pressure sensor module with an integrated electronic matching unit, an amplifier
More information3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
More informationU1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 030-U1 Pump Body 1 See Note 1 1 030-U1 Pump Body with Flush 1 See Note 1 1 034-U1 Rectangular Flange Inlet Body 1 See Note 1 1 034-U1 Rect. Flange Inlet Body with Flush 1 See Note 1 1
More informationAnderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
More information2900 MPV Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 2900 MPV Series Pilot-Operated Safety Relief Valve A unique design that combines top performance, capabilities and features within an
More informationST3000 Series 900 Smart Transmitter Differential Pressure Transmitters
ST3000 Series 900 Smart Transmitter Differential Pressure Transmitters Model STD910/STD920/STD930/STD960/STD921/STD931/STD961 OVERVIEW The ST3000 Smart Transmitter is a microprocessor-based smart transmitter
More informationWall-mounted device ET / 1. Chlorinator C Improved changes are always reserved without notice. JESCO DOSIERTECHNIK GmbH & Co.
Wall-mounted device ET 2 02 25 / 1 ET 2 02 25 / 2 Item Description Qty. 5 kg/h 10 kg/h 15 kg/h 25 kg/h 1 Vacuum regulator C2525-V 1 20231834 (see ET 2 02 25 / 5) 2 Backpressure regulator C2525-H 1 20231835
More informationFeatures. Model 570 Control Valve. Valve Sizes and Connections. Maximum Temperatures
Features Valve Sizes and Connections The 2, 3, 4, 6 and 8 flangeless valves will mate ANSI 150, 300, and 600 raised face flanges. Maximum Temperatures 650 F (343 C) Maximum. NACE Service Standard trim
More informationANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
More informationInstallation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed
More informationDURABILITY & PRECISION
DURABILITY & PRECISION Flat Glass Gauges & Valves for Process Level Measurement by KEnco Featuring New Reflex & Transparent Armored Level Gauges Engineered Liquid Level Solutions www.kenco-eng.com FLAT
More informationSami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI /
More informationANDERSON GREENWOOD SERIES 500 PILOT OPERATED SAFETY RELIEF VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood TABLE OF CONTENTS 1. General valve description and start-up... 1 2. Main valve maintenance... 1 3. Pilot maintenance... 5 4. Pilot
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationINSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
More informationInstrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.
Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.
More informationBlock-and-bleed valve 2-valve manifold Models IV20 and IV21
Valves and protective devices Block-and-bleed valve 2-valve manifold Models IV20 and IV21 WIKA data sheet AC 09.19 Applications Shut off and vent pressure measuring instruments For gaseous and liquid aggressive
More informationCageless 249 Series Displacer Sensors
Instruction Manual Form 1803 October 1993 Cageless 249 Series Cageless 249 Series Displacer Sensors Contents Introduction............................... 1 Scope of Manual............................. 1
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationIFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
More informationControl Components Pty Ltd. Drawing Number. Indicator Model Overview A 66.01A Side flanged connection
ABN 24 8 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 ()2 9542 8977 fx: +61 ()2 9542 7978 www.controlcomponents.com.au HELP@controlcomponents.com.au Magnetic Visual Level Indicators made
More informationINSTRUMENTATION MANIFOLDS VALVES. VM Series.
INSTRUMENTATION MANIFOLDS VALVES VM Series www.unilok.com s - VM Series Features Pressure rating up to 6000psig (413bar) @38 C (100 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) with standard
More informationPurge Adapters. The Solution to Isolate the Process. Flow, Level and Pressure Applications: Product Features: Contact Information:
Purge Adapters The Solution to Isolate the Process Flow, Level and Pressure Applications: Parker s Purge Adapters are used where the sensing lines need a constant purge to prevent plugging, and where the
More informationKOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
More informationP630 High Flow Gas Regulator
High Flow Gas Regulator Stainless Steel Internals are Standard Steel Units comply with NACE MR0175 Durable Powder Coated Exterior Wide of Flow Capacities The is a spring loaded, direct-operated regulator
More informationDIAPHRAGM SEALS Measuring your world since 1965
INSTRUMENTS Measuring your world since 1965 DIAPHRAGM SEALS MADE IN THE USA Measuring your world since 1965 REOTEMP DIAPHRAGM SEALS WHY A DIAPHRAGM SEAL? Diaphragm seals are used in applications where
More informationL D FB DEVICES FIELDBUS PRESSURE TRANSMITTERS. Features 0 ~125 Pa to 0 ~ 40 MPa. (0 ~0.5 inh 2
L D 3 0 2 FIELDBUS PRESSURE TRANSMITTERS FB DEVICES Features 0 ~125 Pa to 0 ~ 40 MPa. (0 ~0.5 inh 2 0 to 0 ~ 500 psi). 0.075% accuracy of the calibrated range. Accepts calibration from URL to URL/120.
More informationDM9900 Series Segmented V-Ball Control Valve
DM9900 Series Segmented V-Ball Control Valve Direct mount, Live Loaded Packing Interchangeable Metal and Soft seats DESIGN FEATURES Size Range 1-1/2-30 ISO 5211 Direct Mount Design ANSI Class 150, 300,
More informationSmart Pressure Transmitter
DOC. NO.: C3100L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3100L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More informationFIELD DEVICES CONTROLLERS
FIELD DEVICES CONTROLLERS Product Specifications 43AP Pneumatic Indicating Controllers These instruments indicate and control pressure, temperature, vacuum, and differential pressure. They provide process
More informationHi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
More informationErrata Sheet. for The following Instruction Manuals
Errata Sheet April 2005 2500-249 Series Errata Sheet for The following Instruction Manuals Instruction Manual Title Form Number Date Caged 249 Series Displacer Sensors 1802 Cageless 249 Series Displacer
More informationRosemount DP Level Transmitters and 1199 Seal Systems
Product Data Sheet FOR ROSEMOUNT 3051S, 3051, AND 2051 TRANSMITTERS APPLICATIONS Level, Flow, Pressure, Interface, Density Extreme hot and cold temperatures Corrosive, clogging, or viscous processes Hygienic
More informationANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
More information