General Specifications

Manifolds for DPHarp EJA and EJX Pressure and Differential Pressure Transmitters. Pressure psi (bar) (860) (552) (413) 4.

General Specifications Manifolds for DPHarp EJA and EJX Pressure and Differential Pressure Transmitters www.parker.com Yokogawa Europe has included Parker Hannifin manifolds with our DPharp range of pressure

Instrumentation Manifolds Traditional C13WT series. For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters

Instrumentation Manifolds Traditional C13WT series For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters Introduction About Yokogawa and WIKA About the catalogue Yokogawa and WIKA have

General Specifications

General Specifications Model RAGG Rotameter GS 01R01B06-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float

Sami Sami Instruments Instruments srl srl Instrumentation products Valves and manifolds 2008 Page 1 Contents Introduction Page 3 Standard Features Page 4 Coding system Page 5 Valves Page 8 ACCESSORI /

General Specifications

General Specifications GS 22B01C06-01EN-A C13ST Manifolds for Traditional Mount Differential Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-3 and C13ST-5 manifolds are

Process to Instrument Valves: C13SF Monoflanges For DPharp EJX & EJA-E Pressure Transmitters

Process to Instrument Valves: C13SF Monoflanges For DPharp EJX & EJA-E Pressure Transmitters Introduction Introduction The partnership of Yokogawa and AS-Schneider creates a real added value to our customers.

Page 1 Worldwide Rev e

Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling

Monoflanges. Page 1. Rev. 0-0

Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to

Digital Vortex Flowmeter. digitalyewflo. Digital Vortex Flowmeter. Series. Bulletin 01F06A02-00E.

Digital Vortex meter digitalyewflo Digital Vortex meter Series Bulletin 01F06A02-00E www.yokogawa.com/ Series Simple body construction for easy installation and high level of safety 2 3 Standard Type /

General Specifications

eneral Specifications Model RAH Rotameter S 01R01B05-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. The mounting

Instruction Manual. Model SC4A 19mm Conductivity Sensors. IM 12D7J4-E-E 6th edition YOKOGAWA

Instruction Manual Model SC4A 19mm Conductivity Sensors YOKOGAWA 6th edition TABLE OF CONTENTS 1. GENERAL... 1 1-1. Type number... 1 1-2. General specifications SC4A-AD... 1 1-3. General specifications

T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet

T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not

General Specifications

General Specifications GS 22B01C05-00EN-A C13ST Manifolds for Traditional Mount Gauge and Absolute Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-2 2-Valve manifolds are

General Specifications

General Specifications Model -FTS Differential ph/orp-sensor Overview The -FTS is the newest development in ph sensor technology available from Yokogawa. This sensor combines the measuring technology of

Model PH87 Retraction Sensor Assembly

Instruction Manual Model PH87 Retraction Sensor Assembly Yokogawa Corporation of America 2 Dart Road, Newnan, Georgia U.S.A. 30265 Tel: 1-800-888-6400 Fax: 1-770-254-0928 Doc. Nr. L2528 January 2012 3rd

General Specifications

General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and

Vortex Flowmeter. digitalyewflo. Vortex Flowmeter. Series. Bulletin 01F06A02-00E.

Vortex meter digitalyewflo Vortex meter Series Bulletin 01F06A02-00E www.yokogawa.com/fld Series Simple body construction for easy installation and high level of safety 2 Standard Type / Multi-variable

3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)

3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards

General Specifications

General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters

Instruction Manual. Models FD30 / PB30. Fittings for the DO30G. IM 12J06K04-E-E 6th edition

Instruction Manual Models FD30 / PB30 Fittings for the DO30G 6th edition 2 Table of contents 1. Introduction...3 2. Unpacking and checking...3 3. Warranty and service...3 4. Genral specifications...4 4-1.

General Specifications

General Specifications Model RAGK Rotameter GS 01R01B07-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This float

Monoblock DBB. Page 1

Monoblock DBB Page 1 Page 2 Ball bore size 10 mm Ball and Bleeder Bleeder Antitamper ( optional ) Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend

ABB measurement & analytics data sheet. Model M26 Manifold line for 266 pressure transmitters

ABB measurement & analytics data sheet Model M26 Manifold line for 266 pressure transmitters Measurement made easy Engineered solutions for all applications 2 M 26 M a n ifol d li n e for 26 6 p r ess

Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents

Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,

General Specifications

General Specifications Model RAGL Rotameter GS 01R0108-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This metering

Rosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated

Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs

Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51

Valves and protective devices Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51 WIKA data sheet AC 09.23 Applications Shut-off, pressure

Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents

Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,

Rosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated

Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs

Block-and-bleed valve 2-valve manifold Models IV20 and IV21

Valves and protective devices Block-and-bleed valve 2-valve manifold Models IV20 and IV21 WIKA data sheet AC 09.19 Applications Shut off and vent pressure measuring instruments For gaseous and liquid aggressive

INTRODUCTION AND STANDARD SPECIFICATIONS

INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to

General Specifications

General Specifications Model DO30G and FD30/PB30 Sensor and fittings for Dissolved Oygen DO The DO30G sensor for dissolved oygen is designed for use in water treatment plants such as sewage treatment works,

General Specifications

General Specifications Model PH20 and FU20 ph/redox and Temperature sensor The PH20 is nicknamed "Tempress" because of the patented compensation for changes in the process temperature and pressure. This

413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F

Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections

Ball Valves PSI

6.000-0 PSI Ball Valve Components 10 9 7 11 8 6 2 1 3 4 5 1 BILL OF MATERIALS 1 CLOSE FITTING AISI 316L 2 SEAL RINGS PTFE 3 BALL SEATS PEEK 4 VALVE BODY AISI 316L 5 BALL AISI 316L 6 PIN A4-70 7 GASKET

Anderson Greenwood M4TL Liquid Level Manifolds

A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for

General Specifications

General Specifications Model RAKD Small Metal Rotameter GS 01R01B30-00E-E A float is guided concentrically in a conic metal tube. The position of this float is magnetically transmitted to the indicator.

Instrumentation Products F Series Manifolds and Multi-Way Cocks

Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation

Instrumentation Manifold Valves

Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3

Anderson Greenwood M25/M251 Block and Bleed Gauge Valves

Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or

Static Pressure Manifolds M25, M25A, M25B, M251 and M251B

Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,

MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.

A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds

ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS

Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design

115 Series, Needle Valves, Single Block, Male x Male

115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,

instrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8

Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting

Anderson Greenwood PTM/PT7 Static Pressure Manifolds

m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings

Rosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev MA August Contents

Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,

HOKE Monoflange Valves. Primary Isolation Valves

HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral

Variable V Area Flowmeter Rotameter The Original

Variable V Area Flowmeter Rotameter The Original precise measurement of liquids and gases robust and universal proven device with an installed base of more than 500,000 worldwide a wide product range many

Instruction Manual YOKOGAWA. Model FD20 Immersion Fittings. ph/orp. IM 12B6K2-01E-E 7th edition

Instruction Manual Model FD20 Immersion Fittings ph/orp YOKOGAWA IM 12B6K2-01E-E 7th edition TABLE OF CONTENTS 1. INTRODUCTION... 2 2. SPECIFICATIONS... 3 2-1. General specifications... 3 2-2. Functional

Double Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003

Double Block and Bleed Manifolds and Flanged Products Catalog 4190-FP October 2003 Contents Page 3 Introduction. Page 4/5 Application illustrations. Page 6 Ball valve specification. Page 7 Outside screw

Anderson Greenwood MB Series Integral Manifolds

A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static

Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters

ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold

PRECISIONISO 9001:2008

SUSTECH PRECISIONISO 9001:2008 Direct Mount Manifolds L Series Rated up to 10 000 psi Compact design Ease of use www.sustech.com sales@sustech.com l +27 11 452-9545 Contents Manifolds and Accessories Manifold

VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM

VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold

P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD

3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold

CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 PRODUCTS INDEX 4

Fluid control division MANIFOLD CONSTRUCTION MATERIAL 2 HOW TO ORDER 2 DESIGN FEATURES 3 INDEX 4 ACCESSORIES MOUNTING BRACKETS 35 OVAL FLANGES 35 BLEED 35 CONDENSING POTS 36 SYPHONS 36 AIR FEED HEADERS

Overview Replacement Meterbody and Heads for Model STD 110

ST 3000 Smart Transmitter, Release 300 and Smart Field Communicator Model STS03 Transmitter Model STD0 34-ST-99-8 04/03 Addendum (to User s Manual 34-ST-5-4B) Overview Replacement Meterbody and Heads for

Instrumentation Manifold Valves

Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3

General Specifications

General Specifications Model RAKD Small Metal Rotameter GS 01R01B30-00E-E A float is guided concentrically in a conic metal tube. The position of this float is magnetically transmitted to the indicator.

Rosemount Manifolds. Product Data Sheet April , Rev PC. Factory assembled, leak-tested, and calibrated

Product Data Sheet pril 2015 00813-0100-4733, Rev PC Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs Integral

Instrumentation Ball Valves

Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator

ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS

A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT

Manifold & Gauge Valves I [

Instrument High Technology Valve, Flange & Fitting Series Manifold & Gauge Valves I [ Instrument Manifolds Stainless steel Bar handle Packing bolt permits stem packing adjustment. Stem thread enhance cycle

Needle Valves. Catalog 1203/1205 Aug 2012

Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -

ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS

ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION

Instruction Manual YOKOGAWA. ph/orp. Model FD20 Immersion Fittings. IM 12B06K02-01E-E 9th edition. IM12B06K02-01E-E_ed09.indd 1 07/03/16 09:51

Instruction Manual Model FD20 Immersion Fittings ph/orp YOKOGAWA 9th edition IM12B06K02-01E-E_ed09.indd 1 07/03/16 09:51 2 IM12B06K02-01E-E_ed09.indd 2 07/03/16 09:51 Contents 1. Introduction 5 1.1 Features

General Specifications

General Specifications Model PH20, FU20 and FU24 analog 4 in 1 ph sensor A family of wide body sensor is available for application in a wide variety of processes. The sensors share the same valuable features:

Manifold Valves. Important!

Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating

Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds

Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for

Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves. Manifolds

Hand & Gauge Isolation Valves Needle Valves Gauge Valves Block & Bleed Valves Manifolds Two, Three & Five Valve Manifolds for Gauge and Differential Pressure Applications Accessories Built Hex tough for

General Specifications

General Specifications Model DO30 and FD30/PB30 Sensor and fittings for Dissolved Oygen DO The DO30 sensor for dissolved oygen is designed for use in water treatment plants such as sewage treatment works,

Block & Bleed Valve.

Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange

ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM

Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight

Instrumentation Products Soft Seated Needle Valves and Manifolds

Instrumentation Products Soft Seated Needle Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation

)SLIM LINE) MONOFLANGE VALVES

)SLIM LINE) MONOFLANGE VALVES OVERVIEW The ASTAVA monoflange range is designed to seamlessly connect process piping to instrumentation. By offering a primary isolate bonnet, our line of monoflanges are

TRANSMITTER ATTACHES TO THIS SURFACE

FIELD DEVICES - PRESSURE Product Specifications Logo PSS 3-5A1 B Model IFOA Integral Flow Orifice Assembly Used with I/A Series or Pneumatic d/p Cell Transmitters PNEUMATIC TRANSMITTER TRANSMITTER ATTACHES

Overview Brochure. Multi Instruments, Edisonweg 1, 4207HE Gorinchem, The Netherlands

Overview Brochure Contact details Multi Instruments: Phone: +31 (0)183 62 88 88 Fax.: +31 (0)183 62 81 82 E-mail: Instrumentation@multi- Homepage: www.multi- http://www.multi http://www.multi-- MI/AP revision

Instrumentation Products. Mini Valves and Rupture Disc Holders

Instrumentation Products Mini Valves and Rupture Disc Holders General Features I Mini Valves and Rupture Disc Holders Introduction Rugged Design for long term performance in the most demanding environmental

Angle Type Needle Valves - Miniature Series

Angle Type Needle Valves - Miniature Series Mod. 020-021 - 022 Applications: Pressure instruments isolation (gauges, switches, transmitters, etc.) Connections: Threaded to ANSI-ASME B1.20.1, ISO 228 -

Introduction. Application & Installation. Integral Block & Bleed Valves

Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining

Products for the Oil & Gas Industry

Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing

General Specifications

General Specifications Model RAKD Small Metal Rotameter GS 01R01B30-00E-E A float is guided concentrically in a conic metal tube. The position of this float is magnetically transmitted to the indicator.

Solution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e

W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold

Manifold Accessories. Catalog 4190-FP-ACC May 2007

Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page

Anderson Greenwood M1/M110 Differential Pressure Manifolds

A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1

Anderson Greenwood M24A/M24T Differential Pressure Manifolds

Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum

Instrumentation Products Monoflanges & VariAS-Blocks

Instrumentation Products Monoflanges & VariAS-Blocks Introduction Introduction The AS-Schneider Monoflanges and VariAS- Blocks are designed to overcome the problems of traditional assemblies on primary

BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.

BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions

Instrumentation Products Modular Mounting System

Instrumentation Products Modular Mounting System Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation Valves

General Specifications

General Specifications Model RAGL Rotameter GS 01R01B08-00E-E This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. This metering

Gauge Valves and Instrumentation Manifolds

Gauge Valves and ation Manifolds GV, GVH, GR Series 2-valve, 3-valve and 5-valve Manifold Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 5, 6369 Offenbach am Main, Germany Tel.: +49

P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD

P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and

VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed

VM Series Manifolds / Gauge Valves Manifolds- Direct & Remote Mount Gauge Valves Gauge Mount / Block & Bleed Catalog No. VM-3 July 2015 VMD Series Direct Mount Manifolds EN 61518: IEC 61518 standard is

Recognized globally for our quality, service and the ability to deliver! ISO 9001:

Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 www.mac-weld.com MACHINING LTD. CONTENTS Introduction Page 1-2 2 Valve Manifolds Page 3-4 3 Valve Manifolds Page 5-7

Instrumentation Products. Modular Mounting System

Instrumentation Products Modular Mounting System Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation Valves

General Specifications

General Specifications Compact ph Probes Model EXA Series EXA Compact is a versatile series of probes suitable for ph measurements in all common applications in industrial processes and (waste) water treatment

Gauge Valves and Instrumentation Manifolds

Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443

FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION

FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable

ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES

A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION