ABB measurement & analytics data sheet. Model M26 Manifold line for 266 pressure transmitters

Size: px

Start display at page:

Download "ABB measurement & analytics data sheet. Model M26 Manifold line for 266 pressure transmitters"

Barry Bradley
5 years ago
Views:

1 ABB measurement & analytics data sheet Model M26 Manifold line for 266 pressure transmitters

2 Measurement made easy Engineered solutions for all applications 2 M 26 M a n ifol d li n e for 26 6 p r ess ur e tr ansmit te rs DS /M26-EN Re v. H Comprehensive wetted material portfolio Accessories available Bolts and brackets allow multiple installations and grant full transmitter support Tee bars easily manoeuvrable Tailored manifold to meet user s needs Perfect interface between process and transmitter thanks to the most common connection types Colour coded functional identification

3 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 3 Functional specifications Manifold pressure rating vs. process temperature: Standard PTFE packing and gaskets External agents resistance PTFE is considered inert towards nearly all known chemical elements and it is insoluble in all solvents. It is only attached by elemental alkali metals, and by Chlorine Trifluoride and elemental Fluorine at high temperatures and pressures. Fluorinated hydrocarbons can have a swelling effect on PTFE but it is a reversible situation, while some fluorinated oils, around 300 C ( 5 72 F ) temperature, swell and dissolve PTFE. PTFE is completely untouched by light and atmospheric agents. Its resistance to nuclear radiations is rather low, it is affected by it starting from 105 rad. with a lowering of the tensile properties. Manifold pressure rating vs. process temperature: optional Graphoil packing and gaskets PTFE properties Mechanical properties PTFE has good tensile properties different from other plastic materials as it may be used over a wide temperature range from 250 C to +250 C ( -418 F to +482 F ). PTFE shows the lowest friction values compared to other plastic materials. Furthermore, being the static friction values almost equal to the dynamic friction values, there is no tendency to seizure within a sliding system situation, and therefore no detachment friction. Electrical properties PTFE has very good electrical properties. Dielectric strength is excellent and remains unchanged even at high temperature, it only decreases depending on the material thickness and on the electrical frequency values. Dielectric constant values and dissipation factor are among the lowest values and remain unchanged even at high temperatures and at a wide frequency range. Good resistance to arc and corona effect. Other properties PTFE surfaces are highly anti adhesive and do not absorb moisture. PTFE is non-toxic and can be used in contact with food. There are some limitations only for some kinds of filled PTFE due to the toxicity of some filling elements ( i.e. heavy metals and its compounds ). Graphoil properties Mechanical properties Graphoil may be used over a wide temperature range from 250 C to +600 C ( -400 F to F ). It features high resistance to corrosion, heat and fire. Graphoil is generally used in high temperature processes where thermal and/or mechanical shocks can occur. It provides an excellent seal even with low torques or irregular flange surfaces. Other properties Graphoil is a packing and gasket material made exclusively from natural graphite flake. Its high degree of chemical compatibility makes Graphoil inert to most chemicals and gases with the exception of strong oxidizing agents.

4 4 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H...Functional specifications Standard supplied parts M26 manifolds are always supplied with: PTFE gaskets for transmitter connection (for flanged models) 1 or 2 Plugs 1/4 NPT-M (according to the selected model) Carbon Steel bolts Certificate of compliance with the order EN Inspection certificate EN of process wetted parts. Important Please ask for a supplementary check if your application is close to the limits shown in the above picture (230 C and/ or 6000 psi). Important The maximum working temperature of the whole assembly (manifold and instrument) corresponds to the temperature limit of the pressure transmitter. Important When the manifold is assembled to a 2600T pressure transmitter with NACE compliance A4-50 Stainless Steel bolts (available on request), please note that the maximum working pressure is limited to 210 bar (3045 psi).

5 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 5 Specification physical (Refer to ordering information sheets for variant availability related to specific model or versions code) Materials Body, bonnet and nut AISI 316 L ss; Hastelloy C-276 ; Monel 400 ; Inconel 625 Mounting bracket (*) Zinc plated carbon steel; AISI 316 L ss. Gaskets PTFE, other available on request. Bolts Zinc plated carbon steel; AISI 316 ss bolts and nuts Class A4 50 per UNI 7323 (ISO 3506), in compliance with NACE MR0175 Class II (as option). (*) The mounting bracket kit contains: bracket, U-bolts, cap screws, nuts, lock washers, spacers and assembling instruction.

Threaded connections Inlet (process connection) 1/2 in. - 14 NPT male Outlet (transmitter side) 1/2 in. - 14 NPT female Drain 1/4 in.

6 6 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H Configuration Two-valve manifold configurations (Refer to ordering information sheets for options related to specific model or versions code) M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections Inlet (process connection) 1/2 in NPT male Outlet (transmitter side) 1/2 in NPT female Drain 1/4 in NPT female Packing PTFE Rating 690 bar (69 MPa, psi) Included accessory 1 plug 1/4 in NPT male M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections Inlet (process connection) Outlet (transmitter side) Drain Packing Rating Included accessory 1/2 in NPT female 1/2 in NPT male 1/4 in NPT female PTFE 690 bar (69 MPa, psi) 1 plug 1/4 in NPT male M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections Inlet (process connection) Outlet (transmitter side) Drain Packing Rating Included accessory 1/2 in NPT male 1/2 in NPT female 1/4 in NPT female PTFE 690 bar (69 MPa, psi) 1 plug 1/4 in NPT male Note: For details about the correct codification of each single model of manifold, please refer to the ordering information at the end of this document.

M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 7 M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections Inlet (process connection) 1/2 in.

transmitters 1/2 in. - 14 NPT female Flanged according IEC61518/B 1/4 in. - 18 NPT female PTFE 413.3 bar (41.37 MPa, 6000 psi) 1 plug 1/4 in.

7 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 7 M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections Inlet (process connection) 1/2 in NPT female Outlet (transmitter side) 1/2 in NPT female Drain 1/4 in NPT female Packing PTFE Rating 690 bar (69 MPa, psi) Included accessory 1 plug 1/4 in NPT male M26.D.A.S.2.V. - Two-valve bar stock manifold for DP Style transmitters Body configuration Inlet (process connection) Outlet (transmitter side) Drain Packing Rating Included accessory For standard flanges transmitters 1/2 in NPT female Flanged according IEC61518/B 1/4 in NPT female PTFE bar (41.37 MPa, 6000 psi) 1 plug 1/4 in NPT male 1 PTFE gasket for transmitter flanged side (IEC61518/B) 2 Carbon steel screws 7/16 in. UNF (length 2 in.) M26.D.A.V.2.V. - Two-valve bar stock manifold for DP Style transmitters Body configuration Inlet (process connection) Outlet (transmitter side) Drain Packing Rating Included accessory For vertical flanges transmitters 1/2 in NPT female Flanged according IEC61518/B 1/4 in NPT female PTFE bar (41.37 MPa, 6000 psi) 1 plug 1/4 in NPT male 1 PTFE gasket for transmitter flanged side (IEC61518/B) 2 Carbon steel screws 7/16 in. UNF (length 1 3/4 in.) Note: For details about the correct codification of each single model of manifold, please refer to the ordering information at the end of this document.

- Three-valve bar stock manifold for DP transmitters Body configuration For standard flanges transmitters Inlet (process connection) 1/2 in.

8 8 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H...Configuration Three-valve manifold configurations (Refer to ordering information sheets for options related to specific model or versions code) M26.D.A.S.3.V. - Three-valve bar stock manifold for DP transmitters Body configuration For standard flanges transmitters Inlet (process connection) 1/2 in NPT female Outlet (transmitter side) Flanged according IEC61518/B Drain 1/4 in NPT female Packing PTFE Rating bar (41.37 MPa, 6000 psi) 2 plug 1/4 in NPT male 2 PTFE gasket for transmitter flanged Included accessories side (IEC61518/B) 4 Carbon steel screws 7/16 in. UNF (length 2 in.) M26.D.A.V.3.V. - Three-valve bar stock manifold for DP transmitters Body configuration Inlet (process connection) Outlet (transmitter side) Drain Packing Rating Included accessories For vertical flanges transmitters 1/2 in NPT female Flanged according IEC61518/B 1/4 in NPT female PTFE bar (41.37 MPa, 6000 psi) 2 plug 1/4 in NPT male 2 PTFE gasket for transmitter flanged side (IEC61518/B) 4 Carbon steel screws 7/16 in. UNF (length 1 3/4 in.) Note: For details about the correct codification of each single model of manifold, please refer to the ordering information at the end of this document.

- Five-valve bar stock manifold for DP transmitters Body configuration For standard flanges transmitters Inlet (process connection) 1/2 in.

9 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 9 Three-valve manifold configurations (Refer to ordering information sheets for options related to specific model or versions code) M26.D.A.S.5.V. - Five-valve bar stock manifold for DP transmitters Body configuration For standard flanges transmitters Inlet (process connection) 1/2 in NPT female Outlet (transmitter side) Flanged according IEC61518/B Drain Packing Rating Included accessories 1/4 in NPT female PTFE bar (41.37 MPa, 6000 psi) 2 plug 1/4 in NPT male 2 PTFE gasket for transmitter flanged side (IEC61518/B) 4 Carbon steel screws 7/16 in. UNF (length 2 in.) M26.D.A.V.5.V. - Five-valve bar stock manifold for DP transmitters Body configuration Inlet (process connection) Outlet (transmitter side) Drain Packing Rating Included accessories For vertical flanges transmitters 1/2 in NPT female Flanged according IEC61518/B 1/4 in NPT female PTFE bar (41.37 MPa, 6000 psi) 2 plug 1/4 in NPT male 2 PTFE gasket for transmitter flanged side (IEC61518/B) 4 Carbon steel screws 7/16 in. UNF (length 1 3/4 in.) Note: For details about the correct codification of each single model of manifold, please refer to the ordering information at the end of this document.

10 10 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H Mounting dimensions (not for construction unless certified) dimensions in mm (inch) M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in NPT male inlet and 1/2 in NPT female outlet); pressure rating 690 bar (69 MPa, psi) 30 (1.18) OUT 1/4" NPT-F DRAIN ISOLATE VENT. 30 (1.18) 120 (4.72) 57 (2.24) 22 (0.87) IN 148 (5.83) FULLY OPEN M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in NPT female inlet and 1/2 in NPT male outlet); pressure rating 690 bar (69 MPa, psi) 148 (5.83) FULLY OPEN 22 (0.87) OUT Ø5,5 (0.21) ISOLATE 30 (1.18) VENT. 56 (2.20) 120 (4.72) 1/4" NPT-F DRAIN 30 (1.18) IN

11 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 11 M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in NPT male inlet and outlet); pressure rating 690 bar (69 MPa, psi) 143 (5.63) FULLY OPEN 22 (0.87) 120 (4.73) 34 (1.34) 30 (1.18) Ø5,5 (0.22) ISOLATE 1/4" NPT-F DRAIN VENT IN OUT 30 (1.18)

12 12 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H...Mounting dimensions (not for construction unless certified) dimensions in mm (inch) M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in NPT female inlet and female outlet); pressure rating 690 bar (69 MPa, psi) OUT N 2 FIXING HOLES Ø7 (0.27) 60 (2.36) ISOLATE ISOLATE IN 50 (1.97) VENT. 1/4" NPT-F DRAIN VENT. 30 (1.18) 168 (6.61) FULLY OPEN

13 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 13 M26.D.A.V.2.V. Two-valve manifold for vertical flanges DP Style transmitters; 1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating bar (41.37 MPa, 6000 psi). ISOLATE 2x Ø12 (0.47) 108,2 (4.26) FULLY OPEN VENT INSTRUMENT SIDE (IEC 61518/B) INLET SIDE 1/2" NPT-F 20 (0.79) 75 (2.95) 32 (1.30) 131,4 (5.17) FULLY OPEN 42,5 (1.77) 10 (0.39) 1/4" NPT-F DRAIN

14 14 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H...Mounting dimensions (not for construction unless certified) dimensions in mm (inch) M26.D.A.S.2.V. Two-valve manifold for standard flanges DP Style transmitters; 1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating bar (41.37 MPa, 6000 psi). 1/4" NPT-F DRAIN M10 x (0.43) 16 (0.63) 35 (1.38) 61 (2.40) VENT 2X Ø12 (0.47) 60 (2.36) 89 (3.50) FULLY OPEN 41,3 (1.63) ISOLATE INLET SIDE 1/2" NPT-F 40 (1.57) 71,4 (2.81) FULLY OPEN INSTRUMENT SIDE (IEC 61518/B) 75 (2.95) 131,4 (5.17) FULLY OPEN

15 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 15 M26.D.A.S.3.V. Three-valve manifold for standard flanges DP Style transmitters; 1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating bar (41.37 MPa, 6000 psi). EQUALISE 20 (0.79) 2x M10x1.5 2x 1/4" NPT-F DRAIN ISOLATE ISOLATE 4x Ø12 (0.47) 41,3 (1.63) 88,1 (3.47) FULLY OPEN 60 (2.36) 16 (0.63) 30 (1.18) 84 (3.30) 54 (2.13) 105 (4.13) 217,8 (8.57) INSTRUMENT SIDE (IEC 61518/B) 40 (1.57) 72,9 (2.87) FULLY OPEN INLET SIDE 2x 1/2" NPT-F

16 16 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H...Mounting dimensions (not for construction unless certified) dimensions in mm (inch) M26.D.A.V.3.V. Three-valve manifold for vertical flanges DP Style transmitters; 1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating bar (41.37 MPa, 6000 psi). 2x M10x (0.63) 80 (3.15) EQUALISE ISOLATE Ø12 (0.47) 41,3 (1.63) ISOLATE 126,3 (4.97) FULLY OPEN 70 (2.75) INLET SIDE 2x 1/2" NPT-F 54 (2.13) 150 (5.90) 258 (9.96) INSTRUMENT SIDE (IEC 61518/B) 32 (1.26) 10 (0.39) 85 (3.35) 2x 1/4" NPT-F DRAIN

17 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 17 M26.D.A.S.5.V. Five-valve manifold for standard flanges DP Style transmitters; 1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating bar (41.37 MPa, 6000 psi). 2x M10 FIXING HOLES 2x 1/4" NPT-F DRAIN 30 (1.18) 30 (1.18) 115 (4.53) 24 (0.94) VENT EQUALISE VENT ISOLATE 41,3 (1.63) Ø12 (0.47) ISOLATE 109 (4.29) 60 (2.36) INLET SIDE 2x 1/2" NPT-F 54 (2.13) 155 (6.10) 267,8 (10.54) INSTRUMENT SIDE (IEC 61518/B) 40 (1.57) 71,4 (2.81)

18 18 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H...Mounting dimensions (not for construction unless certified) dimensions in mm (inch) M26.D.A.V.5.V. Five-valve manifold for vertical flanges DP Style transmitters; 1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating bar (41.37 MPa, 6000 psi). 2x M10x (0.63) 80 (3.15) EQUALISE ISOLATE ISOLATE VENT 41,3 (1.63) VENT 126,3 (4.98) FULLY OPEN 70 (2.75) INLET SIDE 2x 1/2" NPT-F 54 (2.13) 150 (5.90) 262,8 (10.35) FULLY OPEN INSTRUMENT SIDE (IEC 61518/B) 32 (1.26) 85 (3.35) 2x 1/4" NPT-F DRAIN

19 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 19 Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V. (1/2 in NPT male inlet and 1/2 in NPT female outlet threaded connection). 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 282 (11.08) 224 (8.82) 162 (6.37) 62 (2.44) 36 (1.42) 162 (6.35) 72 (2.83) 1/2" - 14 NPT 105 (4.12) 49 (1.93) 116 (4.57) 143 (5.63) Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V. (1/2 in NPT female inlet and 1/2 in NPT male outlet threaded connection). 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 282 (11.08) 224 (8.82) 179 (7.02) 62 (2.44) 36 (1.42) 142 (5.57) 72 (2.83) 116 (4.57) 1/2" - 14 NPT 105 (4.12) 49 (1.93) 148 (5.83)

20 20 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H...Mounting dimensions (not for construction unless certified) dimensions in mm (inch) Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V. (1/2 in NPT male inlet and outlet threaded connection). 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 282 (11.08) 62 (2.44) 36 (1.42) 102 (3.99) 162 (6.37) 72 (2.83) 116 (4.57) 168 (6.61) 1/2" - 14 NPT 105 (4.12) Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V. (1/2 in NPT female inlet and outlet threaded connection). 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 282 (11.08) 62 (2.44) 36 (1.42) 102 (3.99) 162 (6.37) 72 (2.83) 116 (4.57) 168 (6.61) 1/2" - 14 NPT 105 (4.12)

21 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 21 Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) on manifold bracket with M26.D.A.S.2.V. (1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B) 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 158 (6.23) 179 (7.02) 208 (8.19) 88 (3.45) 88 (3.43) 71 (2.77) 104 (4.06) Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) with vertical flanges on manifold bracket with M26.D.A.V.2.V. (1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B) 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 92 (3.63) 48 (1.89) 243 (9.57) 50 (1.97) 118 (4.63) 144 (5.68) 217 (8.55)

22 22 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H...Mounting dimensions (not for construction unless certified) dimensions in mm (inch) Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.S.3.V. (1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B) 58 (2.28) 78 (3.04) 91 (3.58) 9 (0.35) 55 (2.16) 158 (6.23) 179 (7.02) 11 (0.43) 208 (8.19) 54 (2.13) 88 (3.43) 71 (2.77) 142 (5.59) 104 (4.06) (8.57) Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.V.3.V. (1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B) 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 62 (2.45) 92 (3.63) 229 (9.01) 258 (9.96) 144 (5.68) 236 (9.28)

23 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 23 Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.S.5.V. (1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B) 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 158 (6.23) 179 (7.02) 11 (0.43) 208 (8.19) 54 (2.13) (10.54) 88 (3.43) Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.V.5.V. (1/2 in NPT female threaded inlet and flanged outlet according to IEC 61518/B) 71 (2.77) 104 (4.06) 91 (3.58) 58 (2.28) 78 (3.04) 9 (0.35) 55 (2.16) 62 (2.45) 92 (3.63) 229 (9.01) (10.35) 144 (5.68) 236 (9.28)

24 24 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H Ordering information Main ordering information for model M26 manifold Select one character or set of characters from each category and specify complete catalogue number. Refer to additional ordering information and specify one or more codes for each transmitter if additional options are required. Base model - 1st to 3rd characters M 2 6 X X X X X X X X X X Manifold model for pressure transmitter Design - 4th character Manifold for DP Style transmitters Manifold for P Style transmitters D P Revision - 5th character Revision A A Body configuration - 6th character Standard construction S For vertical-flange transmitter (Note: 1) V Valves - 7th character Two-valve manifold 2 Three-valve manifold (Note: 1) 3 Five-valve manifold (Note: 1) 5 Valve Type - 8th character Standard V Material (wetted parts) - 9th character Stainless steel AISI 316L NACE S Hastelloy C-276 NACE H Monel 400 Inconel 625 M N Packing material - 10th character PTFE Graphoil P G Gasket material (wetted parts) - 11th character None (Note: 2) N PTFE (Notes: 1, 5) P Graphoil (Notes: 1, 6) G Manifold process connection (INLET)- 12th character Threaded 1/2 in NPT-female F Threaded 1/2 in NPT-male (Note: 2) M Manifold transmitter connection (OUTLET)- 13th character Flanged outlet according to IEC61518/B (Note: 1) 1 Threaded 1/2 in NPT-female (Note: 2) F Threaded 1/2 in NPT-male (Note: 2) M

25 M26 Manifold line for 266 pressure transmitters DS/M26-EN Rev. H 25 M26 X X X X X X X X X X X X X X X X X Rating - 14th character bar (41.37 MPa, 6000 psi) (Note: 1) bar (69 MPa, psi) (Note: 2) 1 Transmitter fixing bolts - 15th characters None (Note: 2) N Carbon Steel (Note: 1) C Stainless Steel NACE compliant (MWP=21 MPa, 210 bar, 3045 psi) (Note: 1) S Bracket kit - 16th character None N Carbon Steel bracket kit for pipe mounting (Notes: 1, 3) C Stainless Steel bracket kit for pipe mounting (Notes: 1, 4) S Material traceability - 17th character Inspection certificate EN of process wetted parts 2 Note 1: Not available with design code P Note 2: Not available with design code D Note 3: Not available with bolts code S Note 4: Not available with bolts code C Note 5: Not available with packing material code G Note 6: Not available with packing material code P Standard delivery items (can be differently specified by ordering code) PTFE gaskets for transmitter connection (for flanged models) 1 or 2 Plugs 1/4 NPT-M (according to the selected manifold model) Carbon Steel bolts Certificate of compliance with the order EN Inspection certificate EN of process wetted parts. NACE CONFORMITY IS ACCORDING TO Recommendations PER MR / ISO FOR AISI 316L, HASTELLOY C-276, INCONEL 625 AND MONEL and 5 valve M26 manifolds are in compliance with ASME B Power Piping. Trademarks Hastelloy C-276 is a Cabot Corporation trademark Monel is an International Nickel Co. trademark manifold made in Italy by SAMI Instruments Srl

ABB Ltd. Measurement & Analytics Howard Road St. Neots Cambridgeshire PE19 8EU UK Tel: +44 (0)1480 475321 Fax: +44 (0)1480 217948 ABB S.p.A. Measurement & Analytics Via Luigi Vaccani 4 22016 Tremezzina Loc.

26 ABB Ltd. Measurement & Analytics Howard Road St. Neots Cambridgeshire PE19 8EU UK Tel: +44 (0) Fax: +44 (0) ABB S.p.A. Measurement & Analytics Via Luigi Vaccani Tremezzina Loc. Ossuccio (CO) Italy Tel: ABB Inc. Measurement & Analytics 125 E. County Line Road Warminster PA USA Tel: Fax: abb.com/measurement We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB. Copyright 2018 ABB All rights reserved 3KXP R1001 DS/M26-EN Rev. H

Model WEP Electro-pneumatic positioner. WEP positioner A valve control without compromise

Data Sheet DS/WEP-EN Rev. C Model WEP Electro-pneumatic positioner WEP positioner A valve control without compromise Standard - ma input Single acting, force-balance operating principle Excellent dynamic