pressure Body and Setting wrenching Orifice Pipe-Away Pipe-Away Style Size Inlet Valve Range Height Hex Size Adapter Outlet
|
|
|
- Colin Phelps
- 6 years ago
- Views:
Transcription
1 213 Valves Relief valves WATER & POOL HEATERS rego relief VALVES For Gas & Cryogenic Systems 9400 Series Brass or Stainless Steel, Non-ASME All valves are cleaned and packaged for oxygen service per CGA G-4.1. Bubble tight at 95% of set pressure. Easy to read color coded psig/bar labels. Unique tamper resistant adjusting screw. Adapters provide standard pipe thread connections for venting gas to the outdoors. Repeatable performance. 100% factory tested. Temperature range -320 to degrees. Materials SS style PRV and B style Body stainless steel brass Spring stainless steel stainless steel Seat Retainer stainless steel brass Adjusting Screw stainless steel brass Pipe-Away Adapter stainless steel brass Seat Material Option F for Fluorosilicone for PPV and SS styles for psi. T for PTFE for PRV and SS styles for psi. N for B-9425 and B-9426, Fluorosilicone seat, all set pressures. Flow Performance PRV and SS style flow at SCFM Air/PSIA at 110% of set pressure. B-9425N has a flow at 6.7 SCFM Air/PSIA at 120% of set pressure. B-9426N has a flow at 11.0 SCFM Air/PSIA at 120% of set pressure. Ordering Information Fill in the blanks with options below: PRV 9432 T blank or P 350 blank or P (style) (size) (seat material) (drain hole) (set pressure) (pipe-away option) This example part number indicates: 1/4 PRV style brass relief valve with PTFE seat, set at 350psig and no pipe-away adaptor. pressure Body and Setting wrenching Orifice Pipe-Away Pipe-Away Style Size Inlet Valve Range Height Hex Size Adapter Outlet A Material PSIG B c Sq. Inch p/n F.N.P.T PRV /4 brass /8.062 B /8 SS /4 ss /8.062 SS /2 PRV /8 brass /8.062 B /8 SS /8 ss /8.062 SS /2 PRV /2 brass /8.062 B /2 SS /2 ss /8.062 SS /2 B /4 brass /4.43 B B brass /8.62 B /4 Set Pressure Specify set pressure within range specified for style and size. The B-9426N is available in select settings only. Special order. Pipe-AwAY Option P - Pipeaway included and attached. No drain hole in relief valve. For example PRV9432TP350P. Leave blank for relief valve without pipeaway attached. For example: PRV9432T 350. For Easy Identification, the following standard settings have color coded labels for all PRV and SS Style sizes and settings marked in PSIG and bar: 22 psig - yellow 35 psig - purple 50 psig - white 100 psig - gray 150 psig - red 230 psig - blue 350 psig - orange 500 psig - light blue 450 psig - pink Drain Hole Option Relief valves without pipe-away typically provided with drain holes, leave blank. P - for relief valves without drain hole, for example RPV9432TP350.
2 Valves Relief 214 relief VALVES Packaged and cleaned for oxygen service per CGA G-4.1 Bubble tight at 95% of set pressure. 100% factory tested Repeatable performance. Temperature range -320 to F. Easy to read color coded psig/bar labels. Adapters provide standard pipe thread connections for venting gas to the outdoors. Materials SS style PRV and B style Body stainless steel brass Spring stainless steel stainless steel Seat Retainer stainless steel brass Adjusting Screw stainless steel brass Pipe-Away Adapter stainless steel brass WATER & POOL HEATERS valves Noise reduction ordering information RMI Part No. Seat Material Inlet Connections Factory Pressure (F.NPT) B C Orifice Size In Setting (PSIG) Pipe-Away Adapter NR009432F022 Fluorosilicone 1/ / B NR009432F050 Fluorosilicone 1/ / B NR009432F100 Fluorosilicone 1/ / B NR009432F230 PTFE 1/ / B NR009432F250 PTFE 1/ / B NR009432F300 PTFE 1/ / B NR009432F350 PTFE 1/ / B NR009432F360 PTFE 1/ / B
3 215 Valves Relief The ASME approved 90 relief valves AR series, provide precise control set points which protect cryogenic vessels and piping systems for over-pressurization. High flow rates are approved by ASME rigorous testing to Code VIII. VALVES Relief valves WATER & POOL HEATERS The ninety degree configuration provides relief of cryogenic gases directly avoiding flow through the spring Bubble tight seat provides 100% shut off when resealing or static mode. A variety of inlets and pressure settings assure adherence to application requirements. Temperature Range: -320 F (-196C) to +165 F (+74 C) 100% Facory Tested. Materials: Body... Bronze ATM B61 Upper Body... Stainless Steel ASTM A582 Seat & Stem...Brass ASTM B16 Poppet Guide...Brass ASTM B16 Spring Retainer...Brass ASTM B16 Adjusting Screw...Brass ASTM B16 Cap...Brass ASTM B16 Bushing... Hostaflon TFM1600 (Teflon) Ball...Stainless Steel Upper Gasket... PTFE ASTM D4894 Lower GAsket... Copper ASTM B Spring... Stainless Steel ASTM A 313 Screw...Brass ASTM B16 Grooved Pin... Stainless Steel ASTM A581 Cable & Tie Assy... Stainless Steel & Lead AR Series ASME Flow capacity inlet Inches Outlet Inches SCFM/Air Weight RMI Part No. dn dn Ends A B C D 250 PSI Lbs AR4106A 3/4 1 Thread NPT AR4108A 1 1 1/4 Thread NPT , AR4112A 1 1/2 2 Thread NPT ,
4 Valves Relief 216 VALVES Relief Provides a complete solution for pressure relief devices assembled in a factory setting, pressure and oxygen cleaned ready for attachment to cryogenic bulk tanks. Ideal for OEM applications where pre-fabricated assemblies are favored to streamline constructions. Ideal for all cryogenic liquids including Liquified Nitrogen, Oxygen and Argon. Safe and reliably used in LNG Systems. Excellent for protecting bulk cryogenic liquid vessels, transport trailers and industrial pipelines. High flow rates complement our AR series pressure relief valves and burst disc. Valve side selection is accomplished with a heavy duty control arm clearly labeled for positive isolation. Needle valves accessorize for easy bleed of gas before removing pressure relief devices. Pressure Rating: 725 PSI (50 bar) Temperature Rating: -325 F (-198 C) to +165 F (+74 C) DA6208 DA6206 WATER & POOL HEATERS valves inlet Inches Connection RMI Part No. dn Type A B C D E DA Thread NPT /4 NPT DA /2 Thread NPT NPT
5 217 Valves Relief VALVES Relief The Diverter Valve DR Series, provide a simple solution for the isolation of pressure relief devices during routine change out of a Relief Valve without evacuating the cryogenic vessel. Ideal for all cryogenic liquids including Liquified Nitrogen, Oxygen and Argon. Safe and reliably used in LNG Systems. Excellent for protecting bulk cryogenic iquid vessels, transport trailers and industrial pipelines. DR6108 valves WATER & POOL HEATERS High flow rates compliment our AR series pressure relief valves. Valve side selection is accomplished with a heavy duty control arm clearly labeled for positive isolation. Needle valves accessorize for easy bleed of gas before removing pressure relief devices. Fitted with threaded top Relief Valve ports and bottom Burst Disk connections. Pressure Rating: 600 PSI (41.37 bar) CWP Temperature Rating: -320 F (-196 C) to +165 F (+74 C). 100% Factory tested Materials: Body... Bronze ASTM B61 UNS C92200 Bushing, End Cap... Brass B16 C36000 Spring Clamp... Brass Thread Ring... Brass ASTM B16 C36000 Seat Rings...PCTFE ASTM D1430 Gasket...PTFE Screw...Stainless Steel Ball Stainless Steel Pipe Plug...Brass ASTM B16 UNS C Spring Washer...Stainless Steel Spacer...Brass ASTM B16 UNS C Lever... Cadmium Plated Steel Packing...PTFE Stem...Stainless Steel ASTM A582 UNS S30300 Packing Nut...Brass ASTM B16 UNS C36000 Lock Washer...Stainless Steel DR6112 & DR6113 inlet Inches Outlet Inches Connection weight RMI Part No. dn dn Type A B C D Height Lbs DR /4 Thread NPT R DR /2 1 Thread NPT R DR /2 1 1/2 Thread NPT R
6 Valves Shut Off Cryogenic 218 High quality brazed and welded assemblies are ideally suited for the original equipment manufacturer of bulk cryogenic vessels. A wide variety of valve types including union or bolted bonnet, bronze or stainless steel bodies & top works and piping of stainless steel or copper onstruction are available as production unit. Manifold Ideal for all cryogenic liquids including Liquified Nitrogen, Oxygen and Argon. Safe and reliably used in LNG systems. In addition we can custom design configurations that are welded and brazed in a factory setting. Unitized construction eliminates leaks and provides easy fitup to tank piping. Modules commonly include top and bottom fill valves, fill check with strainer and hose bleed and relief valve. Many options are available which include redundant isolation valves or specific end user dimensions and specifications. Our valve products stand up to high cycle environments, without the need for field adjustment of valve packing. Available alone or as a unitized welded assembly for bulk tank filling. Repeatable performance and geometry. Precision silver brazed and welded assembly. Pressure Rating: SFM Series 725 PSI (50 bar) CFM Series 600 PSI (41 bar) Temperature Rating: -320 F (-196 C) to +165 F (+74 C) 100% Factory tested CFM-4E SFM-4D WATER & POOL HEATERS valves Bonnet Pipe RMI Part No. Size Type Material A B C D E F CFM00002D 1 Union Stainless Steel CFM00004D 1 1/2 Union Stainless Steel CFM00004E 1 1/2 Bolted Stainless Steel AFM00004D 1 1/2 Bolted Stainless Steel PFM00004D 1 1/2 Bolted Copper SFM00004D 1 1/2 Bolted Stainless Steel
Cryogenic & Industrial Gas Equipment
CG-500 Catalog Cryogenic & Industrial Gas Equipment Cryogenic Cylinder Equipment Relief Valves Globe Valves Gate Valves Check Valves Regulators Master High Pressure Valves Adapters, Nipples, Pipe & Miscelaneous
CG-500 Catalog. Cryogenic & Industrial Gas Equipment. Cryogenic Cylinder Equipment. Relief Valves. Globe Valves. Gate Valves. Check Valves.
CG-500 Catalog Cryogenic & Industrial Gas Equipment Cryogenic Cylinder Equipment Relief Valves Globe Valves Gate Valves Check Valves Regulators Master High Pressure Valves Adapters, Nipples, Pipe & Miscellaneous
CG-500 Catalog. Cryogenic & Industrial Gas Equipment
CG-500 Catalog Cryogenic & Industrial Gas Equipment Foreword This catalog briefly describes the Rego Industrial Gas and Cryogenic Equipment available from the Cryo-Flow division of RegO As a result of
SERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
SV418 Series Bronze Safety Valves ASME Section VIII - NB Certified for Air, Gas, Steam, and Liquid
Safety SV418 Series Bronze Safety Description Spirax Sarco's SV418 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
SAFETY RELIEF VALVES SAFETY VALVES CRYOGENIC
CRYOGENIC SAFETY RELIEF VALVES CRYOGENIC SAFETY VALVES - 241 - FIGURE 710/715 SERIES Special Teflon seat, making bubble-tight seals possible to over 90% of set pressures APPLICATION DATA per spec API 527;
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
Introduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
HYDROSTATIC TEST SYSTEM MANUAL
PDQC HYDROSTATIC TEST SYSTEM MANUAL Technical Specification Operating Instructions Part List Revised 12-2016 Manual # PDQC- 6,000 And PDQC-10,000 1 PDQC PERFORMANCE DATA Model Number Maximum Pressure Volume
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
Instrument Manifolds. High Technology Valve & Fitting Series
Instrument Manifolds High Technology Valve & Fitting Series Instrument Manifolds SmallBonnet Valve (Orifice3.2) LargeBonnet Valve (Orifice6.4) Stainless steel Bar handle Packing bolt permits stem packing
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
Railroad Tank Car Equipment
Railroad Tank Car Equipment AAR Approved Relief Valves for Railroad Tank Cars A8890-Series AAR Approval #PRD-039009 Suitable for use on pressurized railroad tank cars with a variety of liquified gasses
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
SECTION COMPRESSED-AIR PIPING FOR LABORATORY FACILITIES
Page 226113-1 SECTION 226113 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
ASME Section I and VIII - NB Certified for Air/Gas and Steam. Series 560. Series 570. Series Stainless steel whetted trimming.
SAFETY VALVES Safety Valves SIZES FROM 1/2 TO 2 1/2 RATED TO 300 PSI TEMPERATURES TO 450 F ASME Section I and VIII - NB Certified for Air/Gas and Steam Aquatrol s Series / valve line is a high capacity
SAFETY VALVES. Series 560 & Aquatrol Safety/Relief Valves SERIES. ASME Section I & VIII - NB Certified for Air, Gas and Steam
SAFETY VALVES ASME Section I & VIII - NB Certified for Air, Gas and Steam SIZES FROM 1/2 TO 2 1/2 NB RATED TO 250# TEMPERATURES TO 406 O Aquatrol s Series / valve line is a high capacity safety valve used
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
Anderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
Block & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
Check Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.
Check Valves SPCV Series Features Fixed cracking pressure. Pressure rating up to 3000 psig @70 (21 ) Temperature rating up to 375 (191 ) with Viton O-Ring. Variety of end connections available. Every valve
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
Kingston Safety Relief Valves
Kingston Safety Relief Valves ASME Section VIII - NB Certified for Liquid, Air/Gas and Steam The safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage.
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
SCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
cs200 series commercial / Industrial pressure reducing regulators
November 2013 cs200 series commercial / Industrial pressure reducing regulators P1188 Figure 1. Typical CS200 Series Pressure Reducing Regulator Features and Benefits Wide Range of Body Sizes and End Connections
1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
CASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
MANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
CRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
Valves and Equipment
DOT/ASME LPG VALVES & TANK EQUIPMENTContainer Valves and Equipment Multi-Service Valve PG. 34 420 Multivalve PG. 35 Underground Multi-Service Valve PG. 36 Underground Multi-Service Valve with Integrated
SECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
Series Regulators - Pressure Reducing
Regulators - Pressure Reducing D26100538X012 Specifications For other materials or modifications, please consult TESCOM. Operating Parameters Pressure rating per criteria of ANSI/ASME B31.3 Maximum Inlet
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators
CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators September 2014 P1182 typical type cp400 regulator P1522 P1410 Typical type CP403 Regulator WITH INTEGRAL TRUE-MONITOR PROTECTION
F300 Pressure Regulator
F300 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P302 has Internal Relief Valve for Overpressure Protection Ideal for Fix Factor Billing The F300 series pilot operated
Automatic Changeover Medical Manifold Installation, Operation and Maintenance Manual
Automatic Changeover Medical Manifold Installation, Operation and Maintenance Manual Andersen Medical Gas 12 Place Lafitte Madisonville, LA 70447 http://www.themedicalgas.com 1-866-288-3783 Model Number:
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
CASH VALVES TYPE G-60 PRESSURE REGULATORS
A self-contained, self-actuated high capacity all purpose regulator designed to operate within close limits FEATURES GENERAL APPLICATION The G-60 is designed for use with steam, water, air, oil, gases,
CRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
Check Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Relief Valves Catalog 4135-CV Introduction Parker Relief Valves are designed such that when the upstream pressure exceeds the
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.
Check valve series SHCV, SOCV, SOACV, SACV HIGH PRESSURE CHECK VALVES SHCV SERIES Features Pressure rating up to 6,000psig(413bar) at 70 (20 ) Temperature rating up to 375 (190 ) with viton seal standard
Recognized globally for our quality, service and the ability to deliver! ISO 9001: Quality Service Experience
Recognized globally for our quality, service and the ability to deliver! ISO 9001:2008 Quality Service Experience www.mac-weld.com CONTENTS Introduction Page 1-2 Needle Valves Page 3-6 Gauge Valves Page
Anderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications JSRLP is a high purity gas low pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. The JSRLP
MERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the
Suggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
Crosby Style JQ Pressure Relief Device. Flow Control
Designed in collaboration with the, Inc. the Crosby JQ is designed with internal parts completely isolated from corrosive fluids and environments. The Crosby Style JQ pressure relief device was designed
CASH VALVES TYPE G-60 HIGH CAPACITY PRESSURE REGULATOR
The Type G-60 is a high capacity all purpose regulator designed to operate within close operating limits. Application Type G-60 regulators are designed for use with steam, water, air, oil, gases, chemicals
See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section.
See Water Gauge/Liquid Level Catalog (PHBRWGA) for more detailed information about the products in this section. water gauges 20-100 Series light Pattern Bronze Water Gauges LEAD FREE OPTION COMING SOON!
INSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear
KINGSTON. KNG Series Product Catalog. Ph: Toll:
KEst.1908 KINGSTON KNG Product Catalog Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050 Ph: 310.326.8287 Toll: 800.210.2525 Email: sales@kingstonvalves.com Kingston Safety
Chlorine Gas Valves Robust Valve
Robust Valve Robust Valve The Sherwood Exclusive Robust Valve features a heavy-duty body and packing nut for increased load carrying capacity and resistance against stress corrosion and cracking. Key Features
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
At Amico Labs we are dedicated to continued growth while producing products of outstanding quality, and providing excellent service.
1 ABOUT US Amico Corporation is a leading manufacturer of Medical Equipment, selling its products through a global distribution channel from three manufacturing facilities in Canada and the U.S. With a
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
Hydraulic Valves Needle Valves
Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series
Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
INDUSTRIAL SPECIALTY GAS/LASER MEDICAL. Industrial Manifolds. Two Gas Blender Systems. Specialty Gas and Laser Manifolds
INDUSTRIAL 8-19 Industrial Manifolds 20-22 Two Gas Blender Systems Manifold Selection Guide...8 Series 200 Single Regulator Manifold...10 Series 210 Pressure Differential Switchover...12 Series 220 Pressure
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
CNG Products. Receptacles, Ball & Check Valves Filters, Tube Fittings. ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested
www.hy-lok.com Catalog No. H-CNG100 April 2014 CNG Products Receptacles, all & Check Valves Filters, Tube Fittings ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested 2007, 2014
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Instrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
Type 455, 456. Type 455, 456. Flanged Safety Relief Valves spring loaded
Type 455, 456 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 456 Packed lever H4 Closed bonnet Materials 08/02 Balanced bellows design 08/04 How to order Numbering system 08/06 Article
KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050